User Manual - SEM Audio Laboratories
Contents
1. CLASSI H ROCK H JAZZ REPEAT PLAYBACK FUNCTION iPod At anytime during iPod playback Press PLAY key on remote control repeatedly to select the symbol will be displayed on the iPod screen CoD CD RANDOM PLAYBACK FUNCTION iPod This unit is able to shuffle all songs on an iPod and play them back in random order To activate this function select the shuffle icon on the iPod The shuffle symbol will be displayed on the iPod screen the songs will be played in random order To repeat the current track To repeat all tracks E 6 GENERAL FUNCTION USING THE AUDIO LINE IN CONNECTION AUX INPUT You can connect the audio output of an external device such as a MP3 player to this unit to listen to the sound of that device through the high quality amplifier of this music system To connect the external device please use a standard stereo headphone 3 5mm to 3 5mm plugs cable to connect the headphone out or audio line out of the device to the AUX input socket of this unit Switch the function to AUX using the LiPod AUX key Switch on the unit and the external device eg MP3 player Start playback of the external device and adjust the volume control of the main unit to the desired level Remember to switch off the unit when you are finished using the external device MUTE FUNCTION This set has a mute f2. weaned weds Manual Frequency 5 E 8 Automatic Frequency E 8 Radio Memory arii dt v la Saa t E 8 Whatis MP3 bo AR ARE USB 80 USB Drive amp SD Card 1 Programming for USB Pen Drive SD card E 11 Text Display iidse E E E 11 Repeat Playback Function E 11 iPod OPERATION Preparation of iPod Operation with the E 13 SPECIFICATIONS amp SET UP A makes oe a IMPORTANT SAFETY amp NOTICE The lightning flash and arrowhead within the triangle is a warning sign alerting you of dangerous voltage inside the product CAUTI WARNING Mmmm reduce the risk of electric shock do not remove cover or back No user serviceable DO NOT OPEN parts inside Refer servicing to qualified service personnel CAUTION A The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product Grounding or polarization The precautions should be taken so that the wider blade of the AC plug must match the slot in receptacle wall socket Do not expose to dripping or splashing liquids Invisible laser radiation when open and interlocks defeated Avoid exposu
3. TUNE KEY 10 SLEEP KEY 23 ENTER KEY aa 11 SNOOZE KEY 24 NEXT TUNE KEY D 12 TIMER KEY 25 DOWN KEY r 13 PROG CLOCK ADJ KEY 26 BATTERY COMPARTMENT POWER SUPPLY AC OPERATION EXTERNAL AC DC POWER ADAPTOR This set is equipped with a DC jack capable of accepting AC adaptors with a rating of DC 15V 3A and with a plug with the following polarities as shown center positive Please use only the supplied AC adaptor to operate the unit Use of Cm other adaptors may damage the unit or cause it to malfunction Plug the tail end of the AC adaptor into the DC jack socket on the underneath of the main unit Make sure the voltage of the AC adaptor operates at the same voltage as your local household voltage Insert the plug at the end of the power cord into the wall AC socket Press the on standby key to switch on the unit This unit is designed to operate without ever being totally powered off It will either be on or in standby mode In standby mode the blue back light of the digital display will be dimmed but the display will show the current time clock function Anytime during standby mode you can switch on the unit by pressing the on standby key on remote control or front panel of the main unit Save energy by switching the system to standby mode BACK UP BATTERIES Open the battery door at the rear of unit Insert 2 pcs AAA ce
4. any track song number of your choice to be stored in successive program memory positions Make sure to press PROG CLOCK ADJ key each time 6 After a maximum number of songs or less have been selected as described press the PLAY PAUSE key to start playing your programmed sequence of songs 7 To clear cancel the entire program which is stored in the memory simply press STOP key twice This will reset the memory and clear the program TEXT DISPLAY MODE id3 display This unit is capable of displaying the text information id3 tag of an MP3 song on the LCD display It will show up automatically during MP3 songs playback To switch on or off this function simply press the id3 FM mode key IMPORTANT MP3 file name format Please take care to use only regular english alphabets a to z amp numerals 0 to 9 in the file names of songs Characters such as underscore amp space may result in the files being unreadable or inconsistently unrecognizable by the player REPEAT PLAYBACK FUNCTION USB DRIVE SD CARD At anytime during USB pen drive SD card playback Press PLAY MODE key repeatedly to select REPEAT 1 To repeat the current track REPEAT FOLDER To repeat the current folder REPEAT ALL To repeat all songs E 11 iPod OPERATION PREPARATION OF iPod DO
5. CK To connect an iPod with a dock connector insert the dock adaptor that fits your iPod and then connect your iPod Your HiFi includes dock adaptors that work with most models of iPod with dock connectors If you want to connect another iPod you can easily remove the dock adaptor from your Hi Fi using a fingernail insert the adaptor that fits the other iPod and then insert the other iPod If there is no dock adaptor for your model of iPod included with your Hi Fi an adaptor may have been included with your iPod Please check inside the box of the iPod you purchased for a plastic dock adaptor Dock adapters Choose the dock adapter that fits your iPod Your iPod fits snugly into the correct adapter THE NUMBER SHOWS WHICH iPod FITS PR 18 iPod touch U Jie iPod nano 15 generation 5th generation 2nd generation video camera 8GB 16GB lt TT 9 iPod classic Tio iPod nano 80GB 120GB 160GB 4th generation video 8GB 16GB i OR TOO 7 iPod 5th generation video 30GB 60GB 80GB FOR OTHER iPod MODELS which was included in the box with your iPod If there is no dock adapter for your model of iPod included you can also use the dock adapter itself E 12 iPod OPERATION OPERATION WITH THE iPod Turn on both the unit and the iPod Connect the iPod with the dock connector as describ
6. DRAGON Ultra High Power Advanced Acoustics 2 1 Speaker System FM PLL Radio Tuner Built In Subwoofer Docking Video Output with iPod Docking System USER MANUAL Welcome to the S E M Audio Laboratories Community Thank you for selecting one of our milestones and embracing a lifestyle choice of design and quality This user manual will introduce in detail the features of the DRAGON iP 100 For more information about this and our other milestones please visit www semaudiolabs com CONTENTS IMPORTANT SAFETY amp NOTICE SYSTEM BASICS Location of Controls Main Unit Location of Controls Remote E 3 Power Supply AC Operation E 3 Back Up Batteries 3 Preparation of Remote Control E 3 Digital Clock How to Set Correct 4 Automatic Power on off Timer E 5 Automatic Power off Sleep E 5 GENERAL FUNCTION Snooze Electronic Volume E 6 Music EGUAMHZET oh E 6 Repeat Playback Function E 6 Random Playback Function E 6 Using the Audio Line in Connection te E 7 Mute EuNetlons truret a era atakk aa E 7 Op ration of
7. ality MP3 songs can be recorded with some text information as part of the same file It consists of among other details File name song name Artist name Your MP3 player can locate find a song from the file name therefore you should try to name all your MP3 files with the actual name of the song that it contains There are basically 2 ways to place MP3 song files on your USB drive or SD card with your favorite songs Download MP3 songs from internet amp copy them on a USB drive SD card on your computer Convert CD audio files from a normal music CD onto your computer into MP3 format using a kind software called CD ripper Which is freeware shareware on internet E 9 USB amp SD CARD USB DRIVE amp SD CARD MP3 PLAYBACK This unit is equipped with a USB socket which can accept and play MP3 files stored on standard USB flash drives also known as pen drives which are for memory storage Compatible with USB version 1 1 amp 2 0 This unit also has a built in SD card socket which can accept and play MP3 files stored on standard SD type flash memory cards of maximum capacity 2 GB which are commonly available To utilize this facility first insert either a USB drive or an SD card into the correct slot port Press the function key repeatedly until the display shows Card or USB The display will indicate for a moment the number of MP3 songs and a
8. e will be displayed on the LCD screen for 5 seconds HOW TO SET CORRECT TIME Switch unit to Stand by mode display light off Press amp hold PROG CLOCK ADJ for 3 seconds display shows 12 hour or 24 flashing Press NEXT or BACK to select 12 hour or 24 hour clock display system amp press PROG CLOCK ADJ to confirm your selection Press NEXT or BACK repeatedly to set the correct Hour in the display amp press PROG CLOCK ADJ to confirm Press NEXT or BACK repeatedly to set the correct Minute in the display amp press PROG CLOCK ADJ to confirm Correct time is now set amp will be shown in the display E 4 AUTOMATIC POWER ON OFF TIMER FUNCTION This set has a timer function to enable you to program the unit to automatically switch on or off at preset times This is useful as a morning alarm clock Note This timer function only works after the clock has been set HOW TO SET TIMER 1 Press and hold TIMER key for 2 seconds on remote control The ON symbol appears in the display 2 Press next or back to adjust the hour of the desired key to confirm on time and then press TIMER 3 Press next or back to adjust the minutes of the desired time and then
9. ed Press the iPod AUX key repeatedly until the display shows iPod The unit will automatically start playback of the songs The iPod display will indicate the information of the current song track At anytime during playback press the PLAY PAUSE key to pause operation of the unit Press PLAY PAUSE key to resume operation at the same track amp position At anytime during playback press amp hold the PLAY PAUSE key to stop playback of unit At anytime during playback press and release the NEXT BACK keys to skip forward or backwards by one track as desired Any anytime during playback press and hold the NEXT BACK keys to fast forward cue or fast reverse review the specific track which is currently playing You can operate the iPod using either the set remote control or directly with the iPod itself When the iPod has been connected with the unit it will start charging the battery of the iPod Never remove or unplug the iPod from the set during playback always press amp hold for 2 seconds the play pause key first and then press the iPod AUX key USB card or tuner key to switch to another source eg radio or USB or card etc before removing or unplugging the iPod to prevent damage to your song files or memory devices IMPORTANT The charging process of
10. his unit or at the USB port and or SD card slots if they exist on this product there may be a possibility that the product may stop operation and or shut down immediately This is a normal condition and intended to protect the unit and internal components against damage In such a case please reset the unit by disconnecting and reconnecting AC power source to revert the unit to normal operation LOCATION OF CONTROLS MAIN UNIT AAD gt a SPEAKERS LEFT amp RIGHT DIGITAL BACKLIT DISPLAY STANDBY KEY VOLUME KEY VOLUME KEY EQ KEY FUNCTION KEY MENU KEY PLAY PAUSE KEY CAVITY FOR DOCK ADAPTOR BACK TUNE KEY DOWN KEY ENTER KEY NEXT TUNE KEY E 2 15 16 17 18 19 20 21 22 23 24 25 UP KEY SD CARD SOCKET USB DRIVE SOCKET DOCK ADAPTOR FOR iPod SEVERAL DIFFERENT ADAPTORS ARE PROVIDED HEADPHONE SOCKET DC JACK DC 15V BACKUP BATTERY COMPARTMENT AUX INPUT SOCKET SUBWOOFER OUTPUT SOCKET iPod VIDEO OUTPUT FM ANTENNA WIRE LOCATION OF CONTROLS REMOTE 1 ON STANDBY KEY 14 MEM FOLDER KEY ao 2 TUNER KEY 15 SKIP 10 KEY 9 3 USB CARD KEY 16 MUTE KEY 4 id3 FM MODE KEY 17 VOLUME KEY 5 PLAY MODE KEY 18 VOLUME KEY T 6 EQ KEY 19 MENU KEY DD 7 MEM FOLDER KEY 20 PLAY PAUSE KEY 8 STOP KEY 21 UP KEY 9 iPod AUX KEY 22 BACK
11. ll UM 4 LR03 type batteries in the battery compartment These 2 batteries are for backup of the Real Time Clock and radio memory preset stations during brief power outages Please observe the correct polarities or the memory will not be properly maintained PREPARATION OF REMOTE CONTROL Remove gently pull out the plastic tab from the battery compartment at the rear of the remote control Test the remote control by pressing the on standby key to check that the unit switches on properly using the remote control E 3 DIGITAL CLOCK FUNCTION The set has a built in digital clock which is displayed in 2 situations 1 When the set is in standby mode The display will automatically always show the current time In this situation the blue backlight is normally off to save electricity but you can switch on the blue display light by pressing any key on the set or remote control except the on standby key This will activate the blue light for approximately 5 seconds 2 When the set is in on mode the blue light of the display is on in this mode to indicate that the set is powered on In this situation the LCD display normally does not automatically show the current time But you can press amp hold the Prog Clock Adj key for 2 seconds at any time to see the current time Each time you press amp hold the Prog Clock Adj key for 2 seconds the current tim
12. lso the number of folders on the device then automatically start playback of the first song At anytime during playback press the PLAY PAUSE key to pause operation of the unit Press PLAY PAUSE key to resume operation at the same track amp position At anytime during playback press the STOP key to stop operation of the set This will reset the set to the first track if you press play after stop the first track will always start playing At anytime during playback press and release the NEXT BACK keys to skip forward or backwards by one track as desired Any anytime during playback press and hold the NEXT BACK keys to fast forward cue or fast reverse review the specific track which is currently playing Press the Mem folder or Mem folder key repeatedly to select the desired folder number NOTE Although this product is fully compatible with USB 1 1 amp 2 0 standards a small percentage about 5 of USB flash drives might not be readable due to those USB drive manufacturers non compliance with the full official USB 1 1 2 0 standards The reading time for a USB drive or SD card varies depending on the speed of the memory device and the number of songs and folders In some cases the reading time may be as long as 60 seconds IMPORTANT Always switch off the unit or change mode to CD or Radio before
13. press TIMER to confirm 4 Now the wording in the display changes to show OFF 5 Press next or back to adjust the hour of the desired off time and then press TIMER to confirm 6 Press next or back to adjust the minutes of the desired off time and then press TIMER to confirm 7 Now the display will indicate the wake up mode tuner USB card iPod or buzz Press next to choose the desired mode amp press TIMER to confirm 8 The display then shows the wake up volume level loudness Press back or next to decrease or increase the volume level to be used for the music to be played when the timer switches on the unit at the pre set time Press TIMER to confirm then the unit will momentarily display the timer settings 10 Finally the unit will return to the normal display except that the symbol will be shown to indicate that you have programmed an on off alarm setting 11 In case you wish to disable the timer press the TIMER key once amp the symbol will disappear Note The automatic on off timer will switch on the unit as if you have manually pressed the on off key If you have selected wake to radio the exact preset radio band amp station will become activated when power switches on AUTOMATIC POWER OFF SLEEP FUNCTION This set has a special sleep timer function which can automatically
14. re to beam WARNING To reduce the risk of fire or electric shock do not expose this appliance to dripping or splashing liquids NOTE Caution symbols are printed on rear of unit Please refer to instruction manual PLEASE NOTE You will find the caution rating label for this product located on the rear of the unit To ensure safe use of this product please follow the advice below 1 The apparatus should not be exposed to dripping or splashing and no objects filled with liquids should be placed on the apparatus 2 The marking and rating label is located at rear enclosure of the apparatus 3 The mains plug is used as the disconnect device and it shall remain readily operable To be completely disconnected the power input the mains plug of the apparatus shall be disconnected from the mains completely The mains plug should not be obstructed or should be easily accessed during intended use 4 Under the influence of electrostatic phenomenon the product may malfunction and user to power reset 5 Excessive sound pressure from earphones and headphones can cause hearing loss Battery should not be exposed to excessive heat such as sunshine fire or the like Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type 0 1 ID Electrostatic discharge ESD precaution When electrostatic discharge ESD occurs at the front surface whether metal or plastic or near any part or any button of t
15. removing a USB flash drive or SD card to prevent damage to your USB device or memory card This unit does not support USB MP3 player due to their inherent lack of software compatibility Only USB pen drives flash memory USB drives can be used for MP3 playback IMPORTANT POINT Please do NOT use a USB extension cable to connect your USB Flash Drive to the USB PORT of this unit Such cables can pick up additional interference which can corrupt the data flow preventing normal operation and usage of the USB port Always connect your USB Flash Drive DIRECTLY to the USB PORT without any USB extension cables NOTE This unit supports up to maximum memory size of 4GB USB flash drive amp SD card E 10 USB amp SD CARD PROGRAMMING FOR USB PEN DRIVE SD CARD 1 Switch on the set insert a USB pen drive or SD card and select USB card function function Then press the STOP key 2 Press PROG CLOCK ADJ key The display shows THREE DIGIT TRACK SONG NUMBER FLASHING MEMORY STORAGE POSITION NUMBER 3 Press NEXT to select the desired song track number the song numbers are indicated in three 3 digits 4 Press PROG CLOCK ADJ key to save the selected song into the previous memory position and advance the memory position to the next number so that you can save another song in this position 5 Repeat steps 2 3 and 4 each time selecting
16. switch off the unit This is useful for sleeping to music at night At any time while the unit is operating press SLEEP to choose the automatic off time key on remote control repeatedly 90 80 70 60 50 40 MINS MINS MINS MINS MINS MINS Off means sleep timer is deactivated E 5 30 20 10 MINS MINS MINS OFE GENERAL FUNCTION SNOOZE FUNCTION Whenever the alarm timer comes on it can be temporarily suspended for a short period of approximately 10 minutes by pressing the snooze key on remote control once The timer will then automatically come on again after approximately 10 minutes snooze period has ended The procedure can be repeated for approximately an hour ELECTRONIC VOLUME CONTROL This unit uses an electronic volume control push button type To increase or decrease the loudness of unit press the volume up vol or volume down vol keys respectively Release the key when volume level is at the desired loudness Sometimes especially during listening to the radio you may notice a Click Click Click repeating sound when you are increasing or decreasing the volume This is a normal condition amp the sound will disappear when you release the volume key when you reach the desired volume level MUSIC EQUALIZER Press EO key repeatedly to choose the desired sound effect according to the music you are listening to EQ OFF
17. t station that is found When a desired station is reached It can be saved into one of the memory positions See radio memory section RADIO MEMORY STATION PRESET MEMORY STORAGE At any time the currently displayed station or frequency can be stored into one of the memory position Press PROG CLOCK ADJ key once Press MEM FOLDER or MEM FOLDER key on remote control to select desired memory position There are 30 memory positions Press PROG CLOCK ADJ key once to save the selected station into the selected memory position To recall any saved memory simply press MEM FOLDER MEM FOLDER the saved radio band will be recalled To clear the memory of any position simply save a new station to the same memory positions E 8 WHAT IS MP3 MP3 MPEG 2 layer 3 is a digital file format for audio music You can download MP3 songs from many websites on the internet please observe the copyright regulations of your country MP3 songs are much smaller in memory size compared with normal audio format songs This is called compression amp it allows many more files to be stored on a standard USB drive or SD card Compression rate is specified in kbps kilobits per second For example 128 kbps the higher this number the bigger the MP3 file size the better the sound qu
18. the iPod battery creates a lot of radio interference This is a normal phenomenon therefore this unit will automatically stop the charging process when you switch on the radio Battery charging will resume when you switch off the radio or switch to another mode SPECIFICATIONS SPECIFICATIONS Power Supply E DC 15V 3A though built in DC jack External AC DC power adaptor 100V 240V 50 60Hz Power Consumption 25W Speaker Main speaker 2 5 2 additional 3 x 1 E 14 INSIDE THE INFO SEMAUDIOLABS COM WWW SEMAUDIOLABS COM
19. unction to enable you to turn off the volume temporarily Press the key on remote control once the volume will turn off and the volume bar will flash To resume the sound simply press the MUTE key again E 7 RADIO OPERATION OF RADIO Press the on standby key once to switch on the unit Press the FUNCTION key once the display shows tuner To improve FM radio reception fully extend the FM antenna wire and adjust it s position Anytime in fm stations use the id3 FM mode key to select the desired mode FM Mono Stereo In some cases where reception is poor it may be advisable to select mono mode to improve clarity of the radio signal MANUAL FREQUENCY ADJUSTMENT SCAN MODE Press and immediately release the key or key to scan manually adjust the radio frequency up or down by 1 step at a time The radio digital display will indicate the exact frequency at each step s position When a desired frequency or station is reached It can be saved into one of the memory positions See radio memory section AUTOMATIC FREQUENCY ADJUSTMENT SEEK MODE Press and hold for 2 seconds the NEXT or BACK keys to seek automatically adjust the radio frequency up or down to the next available radio station The radio digital display will indicate the exact frequency of the nex
Download Pdf Manuals
Related Search