SATA HDD 2.5 USB 3.0 External Enclosure User Manual
Contents
1. SATA HDD 2 5 USB 3 0 External Enclosure User Manual DA 70557 Foreword Congratulations on your purchase of our product We will show you a new storage concept with safety and convenience Itis our pleasure to give you the best solution to expand your HDD s Capacity and enhance your data s reliability in PC system Before using The product please read this manual carefully for further recognizing of the product System Requirement Basic environment for setup this device Hardware requirement a PC Notebook with free USB interface Operation system WindowsXP Vista 7 ll Feature Suitable for 2 5 SATA HDD SSD USB3 0 to SATA interface transfer rate max up to 5Gb s This product have been included USB cable itself Support Plug paly and Hot plug Power Supply Bus power Ill Check fittings Before using the product please check the fittings in the package compliant with the below If not please contact the local dealers timely one 2 5 USB3 0 External Enclosure one USB3 0 Cable one User s Manual IV Hardware Install 1 Slide the switch button to Unlock position and pull the plastic cover out 2 Connect the SATA HDD to the 22pin SATA connector correctly and firmly 3 Slide the plastic cover to the main case 4 Slide the switch button to the Lock position 1 2 V Driver Installation Under system WinXP Vista 7 system will automatically detect the new hardware and finish the s2. A Safely Remove Hardware message window will appear click the Stop button 3 It is now safe to remove the USB device message will appear close the Safely Remove Hardware window 4 Remove Power off the USB extended power jack if it is applied Now you can safely remove the enclosure Disclaimer All the information in this document is subject to change without prior notice The manufacturer makes no representations or any warranties regarding the Contents of this manual The information contained in this manual is provided for the general use by the customers No part of this document may be reproduced or transmitted in any form by any means without the express written permission of The manufacturer All brand names and product names used in this document are trademarks or registered trademarks of their respective holders ce E Made In China
3. etup Then an don will appear on the right bottom area of the system toolbar as below a DB AM 1151 Congratulation you enyoy this product now VI Power Supply BUS Power Usually under USB3 0 Bus power mode the device can work normally if your device connect to one USB3 0 PCI E card or USB3 0 Express card and it can t work normally so you need to input additional power to the PCl e or Express card to supply the power VIl Format a new Hard Disk Drive If you use a new Hard Disk Drive you must format it before you use it please follow the steps as bellow to format your new Hard Disk Drive 1 Right click My Computer and select Manager 2 System will display a Computer Manager window and click Disk Manager in left window 3 In right window the message of the new Hard Disk Drive will appear under the system disk such as Seagate 4 Right click the new disk drive and select Delete partition 5 Right click the new disk drive select New Partition 6 Right click the new disk drive select New logical drive 7 Right click the new disk drive select Format disk drive 8 Now you have formatted the new disk drive then in My Computer the new Hard Disk Drive will appear and you can use it VIII Remove the external enclosure Before removing this unit from your computer please finish the following procedures for a safe removal 1 Click the dn in the Desktop window of your computer 2
Download Pdf Manuals
Related Search