User`s Manual
Contents
1. Environment number key At anytime only one environment can be chosen Edit SAVE TO SCENE Scene save key Save the current channel values of the scanners to a scene with some number Set the channel values of various scariners with manual operation or add some scenes then press ire key first and press scene section key and scene numer kev Ths current channel values of the scanners are saved to the number of that section EDIT CHASE Chase edit dey Press the key the indicating light blink It is in the chase edit state Press trie key again tive indicating light is off The edit result is saved and the edit state is quitted SAVE TO ENV Environment save dey Press the key then press environment number key the environment is saved to the number os environment X Y set key Write the X Y control channel number of various scanners to the console then use modulation wheel to control the position of the various scanners Delete key When the chase is edited press the key to delete the current chase step Add key When the chase is edited press the key to add a new chase step after the current one If the current chase step is the last one of the chase the parameters of the current chase step are copied automatically to the new added chase step New Sunny 512 User s Manual ENTER SWITCH Enter Switch key In scene edit and environment edit it is ENTER key In chase edit it is S2. New SLUM 577 DMXS12 CONTROLLER User s Manual Ver 1 0 Summary New Sunny 512 User s Manual New Sunny 512 scanner console is specially designed to control the various scanners To adopt double CPU work in coordination high speed MCU proceed the precise control to achieve 16Bit X Y movement Up to 32 scanners may be connected with a maximum of 16 channels each Multi scenes and multi chase programs can be operated at the same time and 32 scanners can be selected simultaneously It is equipped with two groups of DMX 512 signals and is adapted for wide range of power voltage The edit mode and running mode of the console are convenient and flexible So it is easy to edit and to handle New Sunny 512 is the best suit for art show theater dancing and acting Features DMX512 1990 standard 512 DMX control channels 2 output with optical isolated withstand 2000Vrms Independent slot structure Which is easy to change Up to 32 scanners may be connected with a maximum of 16 channels each A large backlight LCD to display operation parameters 16 sliders for channel 1 slider for speed control 1600 chase steps 48 chases up to 100 steps each Each step contains i s speed and cross time can be set respectively Trigger mode selectable Music synchronous y and manual speed Cooperating with the chase speed slider the time of the program step can 22 changed from 0 03s to 180s 48 scanner scenes can be used directly 4 ch
3. h gt SCANNER Clear key Clear all states chosen by scanner keys and quit manual operation Section key When the indicating ligitt is on 1 16 scanner can be chosen from number keyboard Section key When the indicating light is on 17 32 scanner can be chosen from number keyboard HOLD Scanner hold key When the indicating light is on it is a scanner hold state Multi scanner can be manual operated Scanner number key Press these keys the corresponding indicating lights are on and indicate the scanners are in manual operating states New Sunny 512 User s Manual Press again there are two states HOLD light is off the scanner can t be operated manually HOLD light is on the scanner is in a hold state SHANNELS In manual state 16 channel Slides can set the channel value of the chosen scanner CHANNELS must cooperate With SCANNER SCENE New Sunny512 console can save 48 scenes in 3 saving section with 16 scenes eacn B c Scene section key When the key is pressed the corresponding indicating light is on and indicates that the section is current section If current section is A press scene umber key and A01 A16 scene can be operated If the indicating light of not curret section is on it indicates that there are scenes are running in that secion SINGLE Single scene key Set for each section respectively The key is usec to switch the foll
4. console can save 48 chases A chase is a buildup of some chase steps The concept of chase step is very similar to the scene A chase step is made up of the aggregation of each channel value of various scanners the step time and the graduate change parameter Cross The total capability of the chase step is 1600 Each chase can have up to 100 step In each step of a chase the step time and the gradual change parameter Cross can be set independently The standard operating speed of a chase is decided by the step time and the gradual change parameter Cross of a step The speed can be adjusted from 1 3 to 3 time as the standard speed by SPEED slider maya New Sunny 512 User s Manual Step time value The value defines the interval time between the current to the next step The unit is 0 1s The changeable range of Time is 1 600 It means that the minimum time of a step is 0 1s and the maximum is 60s Cross value The value defines the time ratio of the gradual change treatment between two chase steps The range of the value is 0 100 For instance in the current step Time 10 Cross 60 express that the current step will use 1 second and use 40 of this 1 second as stay time 60 as gradual change treatment time for moving to the next step Process of chase edit 1 6 7 Press EDIT CHASE key a Choose the chase number which will be Edited For instance If want to edit chase Ee CHASE C15 Sten 15 empty C15 press
5. contents The parameter in the is the current adjustable item Its value can be change by modulation wheel PROGRAN CHASE Chase e it ataie CHASE xxx Step is empty The clase witi this number is empty the chase number is replaced by xxx MEMORY IS OVERFLOW There is no space in memory New Sunny 512 User s Manual Table 2 Control channel data of the ordinary scanner 1 IRIS Dimmer Strobe PAN TILT CLAY PAKY GOLDEN SCAN HPE Golden scanner Frost and Effect Prism Rotation FOCUS 10 Fixed Gobo Select 11 12 Gobo Rotation 1 IRIS Color Select Rotation Gobo Select Gobo Seleci diski disk2 Shutter Sirebe SGM GALILEO II EA E E EA a FARS e 5 6 N Gabe Rotation 5 FMMER pra rues 1 NI v l Color Select Gobo Select disk1 disk2 Shutter Strobe SGM GALILEO Trackspot Bond scanner 7 Martin Roboscan Pro 1200 XR 1 Protocol 1 Martin scanner 1200XR New Sunny 512 User s Manual Rotating Gobo Index Continuous Rotation lris Prism N nq O O Cc n Pan 11 Tilt Strobe Fan Speed Lamp on off Reset fixture Dimmer Color Martin Roboscan Pro 518 Mode 3 Rotating Gobo Martin Scanner 518 Effect Wheel Pan Tilt 1 Shutter Strobe SA Rese f xture Dimmer Martin Roboscan Pro 218 Color Mode 3 XQ Gobo Martin Scanner 218 LE Pan Tilt gt 2 Celer FAL ITALSCAN HMI 1200 3 Gono Fly eag
6. current chase step immediately Press DELETE key to cancel the current chase step Hold down the DELETE key over 3 seconds it will delete the whole chase New Sunny 512 User s Manual Environment Edit The current manual operating state scene operating state and chase operating state are the operating environment If the current environment is saved it is very convenient to reuse this environment A complex environment like an environment some chases some scenes some manual operation can be saved as an environment It can be saved to cover the original environment number or saved as another environment number New Sunny512 console can save 15 environment The environment can be chosen by keyboard directly To avoid mistake made by touching keyboard by accident it is needed to preps SELECT key first and the press the environment number key to choose the environment Edit process 1 Base on the need to choose the following operating mode a Scanner manual operation b Scene operation multi scenes running simultaneously c Chase operation up to 4 chase running simultaneously 2 After pressing Key a If no environment program in current Save the TANE r to Environment the screen displays as ere ee rel left figure TIA b Ifthe current includes the environment program the number of the environment is displayed If key is pressed the current environment will cover the contents of the original environme
7. WITCH key lt gt AV Modulation wheel In edit chase lt is used to change edit item AV is used to set the value of the item In manual operation mode is used to set the X position of a scanner AW is used to set the Y position Other MUSIC Music trigger key muno When the indicating light is on chase follows the music rhythm L When the indicating light is off chase follows the set time multiplying the speed Percentage set by SPEED slider BLACKOUT Blackout key When the indicating light is blink console run an inside black scene automatically When the indicating light is off console is in the normal sta e SPEED chase speed slider Push the slider to FAST chase runs faster Pusi tne siider to SLOW chase runs slower Chase step Time x SPEED percentage the actual running time of the current chase step The changeable range is 300 30 When SPFED is 100 chase step runs on the set time and the set cross time When the nioner speed is needed SPEED should be adjusted to smaller than 100 The fast is 1 2 cf the standard speed when SPEED is 30 When the slower speed is needea SPEED should be adjusted to larger than 100 The slowest is one third of the standard snced when the SPEED is 300 LAMP 12V work iamp sock 31 The power of the lamp is smaller than 6W POWER Power switch of the whole equipment oi New Sunny 512 User s Manual Introduction to the rear p 4
8. Work lamp Power Power fuse input fuse Explanation There are 2 optical isolated DMX512 output sockets which have the same signals Audio signal input socket is a 1 4 mono socket with 10 10dB input ievo When the plug is connected music trigger signal comes from audio input signa Whea the plug is pull out music trigger signal comes from the environment sound picked Sy the inside microphone Please use the standard fuse The standard is printed 91 tne backboard The power supply must be connected to the earth tine to ensure the safety Key In the Back Panel This key is used to deleie ihe Memory data If you turn the key to the green point and restart will deisie ail the data in memory If you don t want to delete the data turn the key to red point New Sunny 512 User s Manual Set X Y channels for scanners New Sunny512 scanner console can control the scanners with 8Bit or 16Bit X Y resolution Before New Sunny scanner console uses modulation wheel to control the X Y position of any DMX512 standard scanner the address of every scanner must be set and the set control channel number of each scanner must be written to the console one by one X axis of 16Bit resolution scanner is controlled by two data channels Y axis is controlled by two data channels too So X Y is controlled by 4 data channels X axis coarse channel high 8Bit X axis fine channel low 8Bit Y axis coarse channel high 8Bit and Y axis fine chan
9. ases 48 scenes operated at the same time At most 32 scanners can be selected simultaneously The X Y channels of different scanners can he controlled by modulation wheel 16Bit control for absolutely precise moveinent 15 environment programs to output tke comiriation which are composed of different scenes chases and manual output quick y The music trigger source can be se ectec between audio line input or inside microphone Easy to edit and hanate The Data auto saves High performance switching power supply with extremely low power harmonious distortion and wide range of voitage suit for the requirement of different country Explanation for Feading For reading convenience some signs and usual displays are specially defined as following expresses a key like When the parameter is inside on display like 012 the parameter is the current conice Press expresses press key first and hold then press key X Y control is named Pan Tilt also In the Manual it is X Y the control of X axis Y axis When the key indicating light is on it indicates that the key has been pressed chosen or the function is effective When the indicating light is blink BLACKOUT EDLT function key emphasizes the function Scanner number key expresses that the computer is in a hold state Scene section key and chase section key indicate that when multi scenes and multi chases are running there are scene or chase runn
10. ce matching resister New Sunny 512 User s Manual New Sunny512 console distributes the DMX512 address of various scanners with the fixed space of 16 channels The reference is as following 2 TP z Tes Binary Code Switch 83 Binary Code Switch 3 Binary Code Switch EEFE EEEE EAEE i 7 AA Beaeee PA al A ila 193 me ll BSSESESER BESESESER a ai a il ae Tm P Pedi dil SSHRERERS Zeg seseeez 8 j Ai Sl 5 Rep Lenooo BSARERRER BERHEEEER SSeS SeS2H i gg RE 7 9 SSEBERRES peseeee e DA seaeeuger of lens Aleta A BSSBS8E ZR EERE Gaie ERE HE aoaaa e 2 leegun gt ei naunan EAEE TE ES Eka SRWSRRRR APR EEEEESE ZE2R8S8R 2 BESSERRER 10 145 ARRGMQOE 21 jal ang i 32 497 Em d AMWAY SOO Since the first address set is different for various scanner manufacturer There are two ways to express 512 channels the first is 000 512 The above table is suitable for the product of the second way For the product of the first way we should subtract one from the above address and the first bit of the binary code switch should be changed from 1 to 0 New Sunny 512 User s Manual The panel is as following Cit La Ce Py i CNE whaw LI Tidi eee ii CI y4 al i ae EEE amp
11. ed at the same time are treated by HTP Technique So following setting is proposed 1 For all scenes which just include pattern effect controls such as color pattern and so on the values of X Y intensity and so on are set to 0 2 If chase just include the controls like X Y intensity and so on the values of the other channels are set to 0 Process of scene edit 1 According to the ways of manual operation choose scanner ang set the various channel values and X Y position 2 Press key then press scene district key arid scene number key In the end press key to confirm the save Example If yiu want to save the current scanner running states to A13 scene press key then press key in SCENE and press 113 key In the end press key Tips Scene edit can be done at nay time Ane tne varicus setting to multi scanners if the art pattern is what you want just perforyn ine above step 2 The running states of all scanners can be saved to a scene number For jnstance using simultaneously running scene B02 and C07 as basic Choose 3 scanners manually anc set the light beam to some position then save the combination to scene C01 So run C01 can recur this light art pattern combination Copy of Scene Example Copy scene A01 to scene C10 1 Press key in SCENE then press 1 key Then the console run A01 scene 2 Press SAVE TO SCENE key press key in SCENE then press key and ENTER SWITCH key Chase Edit New Sunny512
12. hich is the basic operation of edit chase step Cooperated with and 17 32 keys A bi keys can make choice to 32 scanners When the number indicating lignt is on that scanner is in the chosen state It can be set by CHANNELS slider and modulation whee CHANNELS 1 16 charnel slider and modulation wheel The values of eacn channel of scanners can be set by 1 16 channel sliders X channel of a scanner is set by modulation wheel lt Y channel is set by modulation wheel AV The set range of a slider is 0 255 Whether 8Bit or 16Bit X Y scanner the set range of a modulation wheel is 0 999 It represents the moving range of X axis or Y axis For 16Bit scanner modulation wheel lt controls X H and X L at the same time Modulation wheel A V controls Y H and YL at the same time For 8Bit scanner modulation wheel lt controls X H only Modulation wheel AY controls Y H only When the X Y channel is controlled by modulation wheel the corresponding X Y slider is locked The X Y potition of a scanner must be set by modulation wheel In the manual mode of a scanner sliedr and modulation wheel can change the value of the corresponding channel The screen displays the value of these channels When the scanner key is pressed the X Y current appears at the right part of the screen Turn the modulation wheel The values of X Y can be changed New Sunny 512 User s Manual Move 1 8 channel slider the screen displays CH A 123 58 204 32 12
13. ing on the section Cautlons New Sunny 512 User s Manual Danger there is high voltage inside the equipment avoid getting an electric shock Caution please don t open the equipment There is no part that can be pepaired by the user Using the equipment the power supply must be connected to the earth line to ensure the safety When console and scanner are working don t plug or pull out DMX512 data cable with the power on This will destroy the port electric components of the console Don t splash any liquid to the scanner console This will shatter the inside components of the console and make functions failure Scanner console is precision electric equipment Please pay attention to moistureproof protection and dustproof protection And please chean the control panel in schedule with non chemical cleanser Contents in the package New Sunny 512 scanner console 1 Users Manual 1 e OCcard 1 e Power supply line 1 _Connecttoscanner New Sunny 512 console has 2 optical isolated DMX512 sigriai incependent drive device So there are 2 DMX512 XLR D3F The connection of the output socket ana the dzia cable as following Foot No ANN Data cable 1 _ __ Screen net 2 i Signal 3 Signal In the end of DMX512data cable 4 1299 matching resister must be connected to the end of the cable to improve the signal transmission quality 1200 Screened wist cane 1200 Cable terminal impedan
14. key In CHASE then Se press key If the chase is empty the screen will display Press key to add a step Current step Pchase Total Sstep step Time cros gt cis 1 1 L 3 A a ps s Current edit Current edit step Default 0 number is last step I De ault 5 Urni 0 1s Use modulation wheel lt tc ckange tiie items such as STEP TIME and CROSS Use modulation wheel ia set the value of the current item Set the channel vatues c various scanners in the current step manually Use ENTER SWITCH key to change the setting state of chase step the various channel values of marl operating scanners and the setting state of X Y Repeat step 5 5 io edit next chase step Press EDIT CHASE key to end edit Tips When key is pressed to add a chase step the values such as the channel values of all scanners the values of TIME and CROSS are copied to the new added chase step automatically So just change some items to make a new chase step If the current chase is empty all channel values are set to 0 In the edit state use key to switch between the chase setting state and manual setting state which set the various channel values and X Y values of scanner In different state the control object of the modulation wheel is different In chase setting state use modulation wheel AW to change the current step This can check the space pattem effect of every chase step and can change the channel values of some scanners in the
15. le scanner 4 lL Strobe 5 Pan o Technical specification Digital control mode DMX control channel amount Control scanner amount Control channel distribution of a scanner Control rdsolution of a scanner Optical isolated independent digital output drive module Electricl isolation of optical isolated independent digital output drive module LCD backlight screen New Sunny 512 User s Manual DMX512 1990 512 32 16 16bit 2 2000VCD 40 character x 2 row BLACKOUT function V Manual operation function v Simultaneous manual operation ability 32 Scanner scene 48 ae Scene amount of simultaneous running scanners 4a MA Scanner chase AQ NS Maximum chase steps in a chase __ pe Chase step time 0 1s 60s Chase gradual change ratio Cross Tot 00 Total capability of chase stepes 1600 Chase amount of simultaneous running scanners Music in phase chase Channel sliders Speed slider The ratio range of chase speed MODULATION WHEEL Environment Copy of scanner scene All scanner X Y channels can be controlled by modulation wheel Data auto save DMX signal output connector Audio signal input connector Power supply range Consume power Work temperature range Work environment Size Weight 10 10dB audio line input inbuilt microrhone 16 1 30 300 2 15 af a a XLR D3F x 2 1 4 mono socket AC 90V 250V 50 60Hz 15W 0 40 C Waterproof dustproof 483mm x 400mm
16. nd the values of X L Y L are set to no the 16Bit scanner will be running in 8Bit X Y resolution The will lost some characteristics of 16Bit scanner such as high precision of X Y orientation and the smoothness of the moving trace Auto correction to the wrong setting X L no Y L no must be set at the same time That just one is no is a mistake New Sunny512 checks and corrects X L Y L to be no at the same time automatically Check the X Y setting of the scanners Use following ways to check 1 Press SET X Y key the indicating light is on It is in setting scanner s X Y state 2 Use scanner keyboard to choose scanner Check the X Y setting 3 Repeat step 2 to check X Y setting of all scanners 4 Press SET X Y key to quit the edit state The manual mode The scanner s channel values such as intensity gobo X Y pattern and coler can be set manually Usually the control contents of each channel of various scanners the scanner connected to the control net can be controlled with facility The contents of each channel of cidinary scanners can be seen in the append tables In the edit state or running state it can be operateo manuativ Manual operation is the highest priority operation The chesen scanner will be divorced from the running scene chase and environment automatically Manual operation is the basic operation Manual opetation especially multi scanner manual operation car be saved as scene w
17. ne of the current chase step Using the method of checking operating perameters of multi chases running simultaneously make a chase to be current chase one by one Then set its chase speed e The music trigge of a chase Press key to make MUSIC indicating light on It indicates that the current chase is in the music in phase trigger state in this state the chase steptime and the gradual change ratio Cross don t work Run Environment Press key then press number key to make the corresponding indicating light on The chase scene and manual operating included in this environment will reappear Every corresponding indicating lights are on Example 5 Run Environment 1 1 Press key 2 Press number key Press SELECT key again and press the number key which light is on The corresponding environment is closed Then the original state will run continually New Sunny 512 User s Manual Addenda Table 1 Explanations to display contents Display contents Explanations X H X axis coarse channel high 8Bit channel X L X axis fine channel low 8Bit channel Y H Y axis coarse channel hight 8Bit channel Y L Y axis fine channel low 8Bit channel NO For 8Bit scanner only X Y coarse channel can be used So the X Y fine channel must be set to no CH Abbreviation of CHANNEL The chase step with is the last step of the current chase gt Use ENTER SWITCH key can switch the display
18. nel low 8Bit For 8Bit resolution scannelr X Y is controlled The explanations of the display can be seen in append table 1 Setting operation of X Y From the User s Manual of the scanner whether the scanner is 8Bit X Y or 16Bit X Y and the attribute of the corresponding channel can be known 1 Press key the indicating light is on It is setting scanner s X Y state 2 Use scanner keyboard to choose scanner 3 Use modulation wheel lt to choose edit item 4 Use modulation wheel AV to choose the value of thie corrdsponding channel range 1 16 no 5 Repeat step 2 4 to set X Y of the other scanners 6 Press SET X Y key to quit the edit state For example Some amp Bit item value Some 16Bit scanner item value scanner MH TANS X coarse channel 5 X 5 Y 7 XI X fine channel 6 XL 6 es VN er Y coarse channel 7 a SN Y fine channel 8 YH d YAL Zino Y L 8 The setting of 16Bit scanner a S Ki N s S Ye S amp S SF e SF cy A D e SET XY CHANNEL X H X L Y H YeoL Scanner 1 5 6 7 8 t 4 f f Scanner s number Setting the corresponding channel number is current item The setting of 8Bit scanner gt g S s gt S S 4 SET XY CHANNEL X H X L Y H Y L Scanner 1 5 no 7 no Scanners number Setting the corresponding i number is current item New Sunny 512 User s Manual For 16Bit scanner if the values of X H Y H are set a
19. nt If it is needed to save io anotner number then Press key Press key Press ENTER SWITCH key to conin Tips To save the environment it is not needed to press SELECT key first To run environment it is asedec 1a press SELECT key first and then press number key New Sunny 512 User s Manual Running Running scene Example 1 Single running scene A01 1 Close running scene B and C one by one Press key to choose A as the current district Press key to make SINGLE indicating light on A district is in the single scene running mode 4 Press key to run scene A01 Example 2 Run A02 B15 C07 scenes at the same time 1 Press key to choose A as the current district 2 Press SINGLE key to make SINGLE indicating light off It is in the mu ti scene running mode 3 Press dey to run scene A02 4 Press key to run scene A10 5 Press key key to run scene B15 6 Press key key to run scene C07 Now the above scenes are running simultaneously Tips In the step 3 of example 2 if press SINSE key to make SINGLE indicating light on perform step 4 to run scene A10 and scene A02 wii clos automatically Running chase CHASE TRIGGER STEP SPEED Running chase the screen will cispiay AO8 HTO x Tog Chase number brea Example le 3 Trigger mode ee Speed ratio Running cnase A08 1 Press SINGLE key of CHASE to make SINGLE indicating light on It is in the single chase running mode Press key to choo
20. oO 0 O 891 Move 9 16 channel slider the screen displays Note the values of channel and X Y depend on the slider position and the X Y modulaton wheel value In a moment of slider moving the value display will disappear until the next moving Manual operation of single scanner 1 Press HOLD key to make the indicating light off 2 Choose scanner press scanner number key cooperate with and keys the indicating light is on It can select several scanner at one time For example hold down the key 2 and then click the key 8 will select the scanner 2 to scanner 8 3 Use CHANNELS sliders to set the channel values use modulation wheel and AV to adjust X Y position Manual operation of the same kind multi scanners 1 Press HOLD key to make the indicating light off 2 Choose scanner according to the 2 step of Manual operation of single scanner multi scanners can be chosen Note only the scanners with tna same X Y channel can be chosen at the same time 3 Use CHANNELS sliders to set the channel values Use modulation wheel lt to adjust X position Use modulation wheel AV ta adiust Y position And the adjusted channel values are set to all chosen scanners at the same time Manual operation of tite different kind multi scanners For the manual operation ai the afferent kind of scanners set one kind of the scanners and make these scanners in the haid state first Then choose another kind of the scanners to
21. owing states When SINGLE ligni is on the current section only can run a scenes When SINGLE light is ofi tiie current section can run multi scenes at the same time a Scebe byncer key Cooperating with scene section key 16 scene keys can operate A01 A16 BO1 B16 C01 C16 48 scenes Using SINGLE key single scene or multi scenes can be operated CHASE New Sunny512 console can save 48chases in 3saving section with 16 chases each A LB Cc Key When the key is pressed the corresponding indicating light is on and indicates that the section is current section If current section is A press scene number key and A01 A16 chase can be operated If the indicating light of not current section is on it indicates that there are chases are running in that section New Sunny 512 User s Manual SINGLE Single chase key The key is used to switch the following states When SINGLE light is on the current section only can run a chase When SINGLE light is off the current section can run up to 4 chases at the same time The key is effective for 3 chase sections Chase number key Cooperating with chase section key 16 chase keys can operate A01 A16 BO1 B16 C01 C16 48 chases Using SINGLE key single chase or multi chases can be operated ENVIRONMENT SELECT Environment choice key Press the key first then press the environment number key the environment can be run or stopped
22. se A as the current district 3 Press key to run chase A08 Example 4 Run A04 A13 B07 C10 chases at the same time 1 Press key of CHASE to make SINGLE indicating light off It is in themulti chase running mode Press key to choose A as the current district Press key to run chase A04 Press key to run chase A13 Press key to choose B as the current district a fon New Sunny 512 User s Manual 6 Press key to run case B07 7 Press key to choose C as the current district 8 Press key to run chase C10 Now the above 4 chases are running simultaneously Tips If the chosen chase is empty without CHASE Step is empty chase step the screen will display Check the various operating parameters of multi chases running simultaneously When multi chases are running the last parameters are displayed in the screen In example4 the parameters of last chase C10 are displayed in the screen If the parameters of some chases are want to be change the chase must be set as current chase and the chase is display in the screen For instance in example 4 here the parameters of last chase C10 are displayed in the screen If the parameters of BO7 are wanted to be seen just press B press key and hold then press key This method does not affct the current chase running e AAdjust chase speed The operating speed of the current chase can be change ny moving SPEED slider h time value X speed ratio real running tir
23. set This is also the usual operation methea to set 1 scene The hold state of the scanner can be change to the choosing state by pressing its key to make the indicating light on 1 Press HOLD key to make the indicating light on 2 Choose scanner use the way of choosing single scanner or multi scanners to choose scanners Note only the scanners with the same X Y channel can be chosen at the same time 3 Use CHANNELS sliders to set the channel values Use modulation wheel lt and AV to adjust X Y position 4 Press the corrdsponding number key of the chosen scanner to make the indicating light blink The set values of these scanners are in the hold state And the adjusted channel values are set to all chosen scanners at the same time 5 Repeat 2 4 steps to set other scanners manually Cancel the manual operation of scanner Press CLEAR key the manual operation is canceled and the set values of the scanners can not be saved New Sunny 512 User s Manual Scene Edit The appropriate values of channels such as color intensity pattern X Y and so on of various scanners can make a needed light art pattern in the space scene Each scene is an aggregate of the set channels of the various scanners New Sunny512 console can save 48scanner scenes The saved scenes can be run at Important tips For the simultaneous running of the multi scenes and multi chases the different values of the same channel which are produc
24. x 105mm 8Kg
Download Pdf Manuals
Related Search