Smart Card Writer_Reader Application, Ver. 4.1
Contents
1. 9 6 2 Scanning and Ethernet Tab 9 6 3 Link Settings 10 Chapter 7 Using the Application 7 1 Creating Configuration Files Administrator Only 11 7 2 Loading Configuration Files 12 7 3 Saving a Configuration on a Smart Card Sales Only 13 7 4 Reading Information from a Smart Card 14 Introduction Smart Card Writer Reader Application Operator Manual 1 1 Introduction The Smart Card Writer Reader Application provides an easy to use interface for generating and editing configuration files and enables to store the configuration data onto a standard smart card using SCM Microsystems SCR335 355 3310 smart card reader and or Omnikey s CardMan 3121 2 Minimum Requirements Before installing the application make sure you have the following available on your computer RAM 256 MB Available disk space 350 MB Windows 2000 XP or 2003 USB 1 1 or above Windows Installer 3 0 or higher Internet Exp2. repair thereafter shall be charged for It could also void the user s authority to operate the equipment About This Manual This manual describes the Smart Card Writer Reader Application how to install it and how to use it to write configuration files and save the configuration onto a standard SIM card The manual covers the following options Installing and uninstalling the Smart Card Writer Reader Application Section 3 Accessing the Application logging in and switching users Section 5 Introducing the Smart Card Writer Reader Application Section 6 Using the application Section 7 Creating Configuration Files Administrator Only Section 7 1 Loading Configuration Files Section 7 2 Saving a Configuration on a Smart Card Sales Only Section 7 3 Reading Information from a Smart Card Section 7 4 Contents Chapter 1 Introduction Chapter 2 Minimum Requirements Chapter 3 Installing the Smart Card Writer Reader Application Chapter 4 Uninstalling the Application Chapter 5 Accessing the Application 5 1 Logging In 5 5 2 Switching User 6 Chapter 6 Introducing the Smart Card Writer Reader Application 6 1 User Information Tab
3. INFORMATION GENERATED ALL OF WHICH ARE EXPRESSLY DISCLAIMED ALVARION WARRANTIES HEREIN RUN ONLY TO PURCHASER AND ARE NOT EXTENDED TO ANY THIRD PARTIES ALVARION NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE INSTALLATION MAINTENANCE OR USE OF ITS PRODUCTS Limitation of Liability a ALVARION SHALL NOT BE LIABLE TO THE PURCHASER OR TO ANY THIRD PARTY FOR ANY LOSS OF PROFITS LOSS OF USE INTERRUPTION OF BUSINESS OR FOR ANY INDIRECT SPECIAL INCIDENTAL PUNITIVE OR CONSEQUENTIAL DAMAGES OF ANY KIND WHETHER ARISING UNDER BREACH OF CONTRACT TORT INCLUDING NEGLIGENCE STRICT LIABILITY OR OTHERWISE AND WHETHER BASED ON THIS AGREEMENT OR OTHERWISE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES b TO THE EXTENT PERMITTED BY APPLICABLE LAW IN NO EVENT SHALL THE LIABILITY FOR DAMAGES HEREUNDER OF ALVARION OR ITS EMPLOYEES OR AGENTS EXCEED THE PURCHASE PRICE PAID FOR THE PRODUCT BY PURCHASER NOR SHALL THE AGGREGATE LIABILITY FOR DAMAGES TO ALL PARTIES REGARDING ANY PRODUCT EXCEED THE PURCHASE PRICE PAID FOR THAT PRODUCT BY THAT PARTY EXCEPT IN THE CASE OF A BREACH OF A PARTY S CONFIDENTIALITY OBLIGATIONS vi Smart Card Writer Reader Application Operator Manual Legal Rights Important Notice This user manual is delivered subject to the following conditions and restrictions This manual contains proprietary information belong
4. LT TOLERANT AND ARE NOT DESIGNED MANUFACTURED OR INTENDED FOR USE OR RESALE IN APPLICATIONS WHERE THE FAILURE MALFUNCTION OR INACCURACY OF PRODUCTS CARRIES A RISK OF DEATH OR BODILY INJURY OR SEVERE PHYSICAL OR ENVIRONMENTAL DAMAGE HIGH RISK ACTIVITIES HIGH RISK ACTIVITIES MAY INCLUDE BUT ARE NOT LIMITED TO USE AS PART OF ON LINE CONTROL SYSTEMS IN HAZARDOUS ENVIRONMENTS REQUIRING FAIL SAFE PERFORMANCE SUCH AS IN THE OPERATION OF NUCLEAR FACILITIES AIRCRAFT NAVIGATION OR COMMUNICATION SYSTEMS AIR TRAFFIC CONTROL LIFE SUPPORT MACHINES WEAPONS SYSTEMS OR OTHER APPLICATIONS REPRESENTING A SIMILAR DEGREE OF POTENTIAL HAZARD ALVARION SPECIFICALLY DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY OF FITNESS FOR HIGH RISK ACTIVITIES b PURCHASER S SOLE REMEDY FOR BREACH OF THE EXPRESS WARRANTIES ABOVE SHALL BE REPLACEMENT OR REFUND OF THE PURCHASE PRICE AS SPECIFIED ABOVE AT ALVARION S OPTION TO THE FULLEST EXTENT ALLOWED BY LAW THE WARRANTIES AND REMEDIES SET FORTH IN THIS AGREEMENT ARE EXCLUSIVE AND IN LIEU OF ALL OTHER Smart Card Writer Reader Application Operator Manual v Legal Rights WARRANTIES OR CONDITIONS EXPRESS OR IMPLIED EITHER IN FACT OR BY OPERATION OF LAW STATUTORY OR OTHERWISE INCLUDING BUT NOT LIMITED TO WARRANTIES TERMS OR CONDITIONS OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE SATISFACTORY QUALITY CORRESPONDENCE WITH DESCRIPTION NON INFRINGEMENT AND ACCURACY OF
5. Smart Card Writer Reader Application User Manual SW Version 4 1 June 2007 P N 214591 ii Smart Card Writer Reader Application Operator Manual Document History Document History Topic Description Date Issued This is the first publication of this manual February 2007 Omnikey support Section 3 Support of new SCWriter added Version 4 1 April 2007 Uninstalling the application Section 4 Added information Version 4 1 April 2007 User Info Section 6 1 Confirm password added field Version 4 1 April 2007 Smart Card Writer Reader Application Operator Manual iii Legal Rights Legal Rights Copyright 2007 Alvarion Ltd All rights reserved The material contained herein is proprietary privileged and confidential and owned by Alvarion or its third party licensors No disclosure thereof shall be made to third parties without the express written permission of Alvarion Ltd Alvarion Ltd reserves the right to alter the equipment specifications and descriptions in this publication without prior notice No part of this publication shall be deemed to be part of any contract or warranty unless specifically incorporated by reference into such contract or warranty Trade Names Alvarion BreezeCOM WALKair WALKnet BreezeNET BreezeACCESS BreezeMANAGE BreezeLINK BreezeConfig BreezeMAX AlvariSTAR BreezeLITE AlvariCRAFT MGW eMGW and or other pr
6. Writer Reader Application Smart Card Writer Reader Application Operator Manual 7 The Smart Card Writer Reader Application comprises the following elements Title Bar Identifies the application s name and indicates entry mode Administrator Sales It also includes standard icons for minimizing or closing the application Menu Bar Includes the following menus Login Enables to switch user see Section 5 2 About Opens the About window displaying copyright information the application s SW version and the release date Figure 8 The Main Window 8 Smart Card Writer Reader Application Operator Manual Introducing the Smart Card Writer Reader Application Tab Selection Area The Tab Selection Area comprises three tabs User Information Tab on page 9 Scanning and Ethernet Tab on page 9 Link Settings on page 10 Selected Tab Area The Selected Tab Area is a workspace that varies according to the selected tab enabling to modify specific parameters depending on user rights Band Selection List The band selection list includes pre configurations according to the selected band This configuration must be defined to create new configuration files Control Buttons Write Smart Card Sales only Writes the configuration information onto the smart card Read Smart Card Reads the smart card The information stored on the smart card is displayed on screen Save File Administrato
7. ader Application Operator Manual Legal Rights invoice date the Warranty Period During the Warranty Period Alvarion may release to its Customers firmware updates which include additional performance improvements and or bug fixes upon availability the Warranty Bug fixes temporary patches and or workarounds may be supplied as Firmware updates Additional hardware if required to install or use Firmware updates must be purchased by the Customer Alvarion will be obligated to support solely the two 2 most recent Software major releases ALVARION SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY PURCHASER S OR ANY THIRD PERSON S MISUSE NEGLIGENCE IMPROPER INSTALLATION OR IMPROPER TESTING UNAUTHORIZED ATTEMPTS TO REPAIR OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE OR BY ACCIDENT FIRE LIGHTNING OR OTHER HAZARD Disclaimer a The Software is sold on an AS IS basis Alvarion its affiliates or its licensors MAKE NO WARRANTIES WHATSOEVER WHETHER EXPRESS OR IMPLIED WITH RESPECT TO THE SOFTWARE AND THE ACCOMPANYING DOCUMENTATION ALVARION SPECIFICALLY DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND NON INFRINGEMENT WITH RESPECT TO THE SOFTWARE UNITS OF PRODUCT INCLUDING ALL THE SOFTWARE DELIVERED TO PURCHASER HEREUNDER ARE NOT FAU
8. ard Writer s LED 7 Click Write Smart Card The configuration is saved on the smart card 8 It is recommended to check that the configuration has been saved on the smart card see Section 7 4 It is also recommended to check the smart card by inserting it into the WiMAX modem 7 4 Reading Information from a Smart Card You can use the Smart Card Writer Reader Application to read the information stored on the smart card in order to check that the information was properly saved on it 1 Select a band from the Band Selection List 2 Make sure that the Smart Card Writer is properly connected to your computer and insert the smart card into the designated slot with the smart card facing the same direction as the Smart Card Writer s LED 3 Click Read Smart Card The information is displayed on screen You can modify any parameter and save onto the rewritable smart card CAUTION Do not remove the smart card and do not disconnect the Smart Card Writer while writing to the smart card while green LED is blinking This may damage your data and may permanently damage the smart card NOTE The smart card is rewritable You can overwrite the stored information numerous times CAUTION Do not remove the smart card and do not disconnect the Smart Card Writer while reading from the smart card This may damage your data and may permanently damage the smart card
9. d band 2 Enter the parameters in all three tabs see Section 6 3 Click Save File to save the parameters as a configuration file with a cfg extension 4 Browse to the location where you want to store the configuration files enter a unique name for the file extension cfg and click Save It is recommended to give the files meaningful names that represent the coverage area e g names of cities regions etc Along with the configuration file cfg a signature file sig is also generated This file is used for security and needs to be saved with the configuration file 5 Repeat this procedure for any number of configuration files 7 2 Loading Configuration Files The loading of configuration files serves the sales person when writing a smart card and the administrator when creating a configuration file based on an existing configuration file The parameters stored in the configuration file are displayed on screen in the various tabs To create a new configuration file IMPORTANT Selecting a different band will discard any changes to the parameters NOTE In the User Information tab the User Name and Password are not available to the administrator They will be filled in by the sales person NOTE The default folder for the configuration files is in the Smart Card Writer folder Using the Application Smart Card Writer Reader Application Operator Manual 13 1 Select a band from the Ba
10. ing to Alvarion Ltd Such information is supplied solely for the purpose of assisting properly authorized users of the respective Alvarion products No part of its contents may be used for any other purpose disclosed to any person or firm or reproduced by any means electronic and mechanical without the express prior written permission of Alvarion Ltd The text and graphics are for the purpose of illustration and reference only The specifications on which they are based are subject to change without notice The software described in this document is furnished under a license The software may be used or copied only in accordance with the terms of that license Information in this document is subject to change without notice Corporate and individual names and data used in examples herein are fictitious unless otherwise noted Alvarion Ltd reserves the right to alter the equipment specifications and descriptions in this publication without prior notice No part of this publication shall be deemed to be part of any contract or warranty unless specifically incorporated by reference into such contract or warranty The information contained herein is merely descriptive in nature and does not constitute an offer for the sale of the product described herein Any changes or modifications of equipment including opening of the equipment not expressly approved by Alvarion Ltd will void equipment warranty and any
11. lorer 5 01 or later 3 Installing the Smart Card Writer Reader Application The executable file Setup exe is available in the Installation CD supplied with the application The installation wizards will guide you through the installation With the application the Microsoft NET platform and the Smart Card Writer drivers are also installed if they are not already installed on your computer You will be prompted to accept the terms and conditions for each of the installed components Follow the instructions on the screen You will be prompted to install the SCR3xx Reader driver Figure 1 NOTE The installation may take several minutes depending on the components installed 2 Smart Card Writer Reader Application Operator Manual Installing the Smart Card Writer Reader Application If you are using Microsystems smart card reader click Yes to install the drivers If you are using Omnikey s CardMan click No You will be prompted to install the CardMan drivers Figure 2 If you are using the Omnieky CardMan click Yes Otherwise click No During installation the Customer Information window is displayed Figure 1 Install SCM Microsystems SCR3xx Drivers Figure 2 Install Omnikey s CardMan Drivers NOTE You can install only the drivers for the smart card reader that you use the drivers for both smart card readers or not install any drivers at all The smart card reader will not work properly unles
12. nd Selection List 2 Click on Load File 3 The default folder for the configuration files is in the Smart Card Writer folder If the files are not stored in the default folder browse to the location where the configuration files are stored and select the required file 4 Click Open to load the information to the Smart Card Writer Reader Application 5 Proceed as follows Administrator change the values of the parameters and save as a new configuration file see Section 7 1 Sales enter the user information and write to the smart card see Section 7 3 At the end of the process a Successful operation message is displayed in the error message area 7 3 Saving a Configuration on a Smart Card Sales Only 1 Connect the Smart Card Writer to your computer s USB port 2 Log in as Sales password sales 3 Select a band from the Band Selection List 4 Load the configuration file see Section 7 2 5 Enter the User Information User Name Password and optionally Organization and Country To load an existing configuration file NOTE If the signature file sig was not saved with the configuration file cfg this procedure will not work To save the configuration on a smart card 14 Smart Card Writer Reader Application Operator Manual Using the Application 6 Insert a smart card to the Smart Card Writer Make sure that the smart card faces the same direction as the Smart C
13. oducts and or services referenced here in are either registered trademarks trademarks or service marks of Alvarion Ltd All other names are or may be the trademarks of their respective owners Statement of Conditions The information contained in this manual is subject to change without notice Alvarion Ltd shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing performance or use of this manual or equipment supplied with it Warranties and Disclaimers All Alvarion Ltd Alvarion products purchased from Alvarion or through any of Alvarion s authorized resellers are subject to the following warranty and product liability terms and conditions Exclusive Warranty a Alvarion warrants that the Product hardware it supplies and the tangible media on which any software is installed under normal use and conditions will be free from significant defects in materials and workmanship for a period of fourteen 14 months from the date of shipment of a given Product to Purchaser the Warranty Period Alvarion will at its sole option and as Purchaser s sole remedy repair or replace any defective Product in accordance with Alvarion standard R amp R procedure b With respect to the Firmware Alvarion warrants the correct functionality according to the attached documentation for a period of fourteen 14 month from iv Smart Card Writer Re
14. r only Saves the configuration to file with the extension cfg Load File Loads information from an external configuration file The information is displayed on screen Figure 9 About Introducing the Smart Card Writer Reader Application Smart Card Writer Reader Application Operator Manual 9 Error message area Displays error messages on missing parameters and wrong values entered The relevant field is highlighted in red 6 1 User Information Tab The User Information tab enables to enter the user information necessary for proper authentication In Administrator mode the User Name and Password are grayed All other parameters are editable In Sales mode all parameters are editable except Location which is determined by the loaded file For information on the parameters refer to the CPEs Product Manual 6 2 Scanning and Ethernet Tab The Scanning and Ethernet tab enables the administrator to enter the frequency scanning range the bandwidth and specify discrete frequencies and port negotiation mode When logged in as Sales these parameters are grayed For more information on these parameters refer to the BreezeMAX CPEs Product Manual Figure 10 User Information Tab 10 Smart Card Writer Reader Application Operator Manual Introducing the Smart Card Writer Reader Application 6 3 Link Settings The Link Settings tab enables the administrator to select an antenna enable disable the Bes
15. s you install the drivers on your computer Installing the Smart Card Writer Reader Application Smart Card Writer Reader Application Operator Manual 3 Enter your User Name and the name of your organization In the Install this application for area it is recommended to select Anyone who uses this computer the default option Alternatively you can limit user s access to the application to the specified user Click Next to continue The Setup Type window is displayed It is recommended to select the Complete installation All program features will be installed When the installation is complete you may be prompted to restart your computer Figure 3 Customer Information Window Figure 4 Setup Type Window 4 Smart Card Writer Reader Application Operator Manual Uninstalling the Application The Fix PC SC window is displayed Click on Begin to activate problem detection When done click OK to close the report window and Cancel to close the Fix PC SC Window 4 Uninstalling the Application 1 When installing the Smart Card Writer Reader Application you will be prompted to uninstall a previously installed version Alternatively from the Windows Start menu select Programs gt Smart Card Writer gt Uninstall Smart Card Writer 2 Click Yes to uninstall the application and then Yes to uninstall the drivers You can also skip the removal of the drivers 3 During the uninstall process of the SCR3x
16. t AU feature and enter Base Station ID and AU ID parameters When logged in as Sales these parameters are grayed For more information on these parameters refer to the BreezeMAX CPEs Product Manual Figure 11 Scanning and Ethernet Tab Using the Application Smart Card Writer Reader Application Operator Manual 11 7 Using the Application Using the Smart Card Writer Reader Application you can perform the following operations Create new configuration files Section 7 1 Loading existing configuration files Section 7 2 Write the configuration parameters onto a smart card Section 7 3 Read a smart card Section 7 4 7 1 Creating Configuration Files Administrator Only Configuration files are ASCII text files that contain settings for many of the Si CPE configuration parameters You can customize your own set of configuration files according to your specific needs for example according to locations These files can later be loaded to the application and saved on a standard smart card Only the Administrator can create configuration files Figure 12 Link Settings Tab 12 Smart Card Writer Reader Application Operator Manual Using the Application 1 Select a band from the Band Selection List This will display the default parameters and the frequency range for that band You can edit these parameters as necessary but you will not be able to save a frequency outside the range defined by the selecte
17. x Reader the following window is displayed Figure 5 Fix PC SC Window To uninstall the Smart Card Writer Reader Application Accessing the Application Smart Card Writer Reader Application Operator Manual 5 4 Select Remove and click Next Follow the instructions on the screen 5 After the uninstallation is complete restart the computer to complete the installation 5 Accessing the Application From the Windows Start menu select Programs gt Smart Card Writer gt Smart Card Writer The Login window is displayed 5 1 Logging In 1 Select a user name and enter the password at the login prompt Figure 7 as follows Figure 6 Uninstalling the SCR3xx Reader To access the application User Mode Password Case Sensitive Access Rights Administrator admin Write configuration Save configuration Load configuration Read Smart Card Sales sales Load configuration write User Information Read Smart Card Write Smart Card 6 Smart Card Writer Reader Application Operator Manual Introducing the Smart Card Writer Reader Application 2 Click OK 5 2 Switching User Click on Login at the top left corner The login prompt is displayed See Section 5 1 6 Introducing the Smart Card Writer Reader Application Following successful login the application opens The display depends on the user mode see Section 5 1 Figure 7 Login Prompt To switch user Introducing the Smart Card
Download Pdf Manuals
Related Search