Instructions for - Installation of Satellite Channels
Contents
1. Page 13 SHARP Choose Manual set up and you will see the following us tzliche Suc yn D ZU satzliche SUC 18 Manuel e rinste lung vq Manuelle Suche Manuelle Einstellung Confirm your choice with the OK button on the remote control Now you will see the following Zus tzliche Suche h Manuelle Einstellung von Digltalprogram Manuelle suche Manuelle Einstellung Confirm the choice Yes by pressing the OK button on the remote control The following image will appear w hlen Sie einen Dienst und drucken Sie dann die Farbentaste zum Andern der Diensteinstellungen Dienstnummer Dienstname Sperre jerien Er berspringen OO ist rue TV 0002 ZDF TV 0003 SAT 1 TV 0004 RTL Television TV 0005 VOX TV 0006 Super RTL TV 0007 n ty TV 0008 ProSieben TV 0009 RTL2 Dienstname G Kanal berspringen PE L schen CB Sortieren Das Erste Page 14 SHARP Don t use the function key Delete yellow button in the on screen menu in order to delete channels before you sort all channels as other channels will also be deleted This would mean that you would have to spend a lot of time allocating other channels These channels would not appear on the list of stored channels any more This leads to a situation in which some channels from the normal sequence are missing e g 1 2 3 5 9 e g the programs 4 7 8 would be missing It is best to r2. I L l O Z TT Instructions for Installation of Satellite Channels Updated March 2011 Experience Reality AQUOS LCD TVs Spring Summer 2011 SHARP LE820 LE822 LE814 LE824 LE914 LE925 Contents 1 First installation 2 Sort channels manually 3 Receive signal from special satellites 4 Special case attenuator 5 Frequently asked questions SERVICE 6 Description of terms In case during the installation of satellite channels on your 812 or 822 series SHARP LCD television you encounter problems or questions refer to these installation guidelines In the following part of the manual you will find examples of installations and answers to frequently asked questions concerning the above mentioned device series When the device has already been fully installed In course of the first installation the device didn t find the expected stations Search for satellites hasn t been fully carried out The number of found stations seems to small Remedy First of all run a software update so that the device has the latest software Update 8 8 10 Version 1 06 The software can be found in the service area of SHARP website After updating software start the installation of the TV again In order to do so enter the menu Set up After entering the menu highlight Reset and confirm your choice with the OK button on the remote control Confirm the resetting and restar
3. The search settings must usually then be adapted to these satellites Example Change symbol rate Bildeinstellungen Autoinstallation Starten Sie die Dienstesuche Verschl sseltprogr Ja Satellit Symbolrate 1 Symbolrate 2 andere 4883 2821 start search Were Instead of Start search choose the point Change settings and the following image will appear Page 17 verschlusseltprogramme Einstellung Choose the point SAT Symbolrate 1 and change the symbol rate over the digit keyboard of the remote control as shown on the following image Symbolrate Einstellung If necessary carry out the same action with regard to SAT symbol rate 2 You can find the right value for symbol rates in the Internet at the website of the relevant satellite operator or the program provider Important You can pre program 2 symbol rates per one search run In case on the satellite more symbol rates are available by using the point of menu Additional search you can carry out many additional searches with further 2 symbol rates each till all symbol rates are found Page 18 SHARP 4 Special case attenuator In some rare cases it may happen that during the reception of HD channel for a short time small squares appear on the screen or the sound stalls Often such effects are caused by the fact that the level of the satellite antenna is too high First of all check whether the device has t
4. 11 8 12 75 GHz to the 950 2150 MHz range and thus enables transfer through a coaxial cable and reception with a satellite receiver LNB Intermediate frequency Intermediate frequency is necessary to transmit the received signal without any problems and losses to the satellite receiver with a normal coaxial cable The conversion is achieved through mixing the received signal with a local oscillator frequency multiplicatively typically 9 75 GHz for lower band and 10 6 GHz for upper band reception For some LNB s setting a differing intermediate frequency may be necessary Some foreign satellites require this Symbol rate The symbol rate simply shows how many symbols per second are being emitted how high the symbol is depends on the transmission system The symbol rates can vary greatly depending on the satellite and the tv provider More than 10 various symbol rates are possible on one and the same satellite Transponder A Transponder on a satellite receives data and transmits it again For example a ground based radio station can transmit data signals for tv to a geostationary satellite which will send back the signal back to Earth Any Page 24 SHARP suitable satellite antenna with visual contact with a satellite can receive the signal A transponder can transmit many different satellite channels Page 25
5. NB Freauenz Einstellung SAT1 Low e750 9000 BE O3 lt m SAT1 High 10600 9000 Oo 12000 If you use a Satellite device with an exotic LNB here you can set the oscillator frequencies of upper and lower sidebands For a normal standard LNB confirm the displayed settings by pressing the OK button on the remote control The following happens then Starten Sie die Dienstesuche Satellitensystem Nur ein Satellit LNB Frequenz Satellit Tief Hoch ASTRA 1 9750 10600 Einstellung ndern SHARP If the settings are correct don t change anything and confirm the choice of Continue option with the OK button on the remote control Now you will see the following Starten Sie die Verschiusseltprosr Satellit Symbolrate 1 Symbolrate 2 ASTRA 1 27500 22000 Suche starten Please don t start the search yet Please highlight Change settings and confirm your choice with the OK button on the remote control The following image will appear Nllssa tprogr Nein Verschiusseltprogramme einstellung SATI Symbolrate 27500 SATI Symbolrate 2 22000 Suchstart Don t change anything and confirm the point Coded channels and confirm your choice with the OK button on the remote control Now you will see the following Page 7 Verschiusseltprosramme Einstellung SAT 1 Syrrbotrate 27500 SAT Syrmbotlrate 2 22000 Suchstart EE 4 Choos
6. aleinstellungen individuell nder VIVAII JE LUM individuelle Einstellung Audio Setup Wandmontage Nein Sprache Deutsch R cksetzen Confirm your choice with the OK button on the remote control Now you will see the following Page 11 um u Setup m O Bildeinstellungen Kanaleinstellungen Programm Einstellungen F hrt Kanal Setup aus Don t change anything and confirm Program settings with the OK button on the remote control The following image will appear Programm Einstellungen Bitte geben Sie Ihre pers nliche Geheimnummer ein BOG Wahien Geheimnummer eingeben Zur ck Enter the 4 digit pin number factory setting 1234 Now you will see the following image Page 12 Setup Bidelinstellungen Kanaleinstellungen Programm Einstellungen Satellit Enstellung Satellitenkanal Einstellunsen Satellit Einstellung Confirm Satellite settings with the OK button In case in the original search settings 2 or more satellites are selected you will see the following image SAT2 Hot Bird 13E Choose the satellites whose channel lists you would like to process and confirm your choice by pressing the OK button on the remote control If in the search settings only one satellite is selected this choice will be Skipped and shortly the following image will appear Manuelle Suche Manuelle Einstellung
7. ce 0 u repetitions can be retained However if there is a problem with the actuation of the equipment try repetition rate 1 or 2 Community installation single cable system is a type of antenna system arrangement in which through abandoning direct current remote power supply 14 18 Volt and DiSEqC control signals a high frequency signal in frequency range 950 2250 MHz satellite range can be linearly delivered to many participants of a community radio reception system In this case it is possible to distinguish between simple single cable solutions and programmable single cable solutions Currently SHARP LCD TV supports only the simple solution Simple single cable systems can be often found in older community facilities and most often don t transmit digital channels but only analogue ones Astra 1 Astra 2 Astra 3 In the installation menu of LCD TV you can choose from various Astra satellites Page 23 SHARP Usually satellite systems are adapted to satellites from the Astra 1 family Astra 1 is a tv satellite on the orbital position 19 2 East Astra 2 is a tv satellite on the orbital position 28 2 East Astra 3 is a tv satellite on the orbital position 23 5 East LNB low noise block converter Low noise signal converter LNB is the first electronic module of a satellite reception system located in focus of a parabolic antenna It converts the satellite frequency of for example 10 7 11 75 or
8. e Yes or No to conduct the search including or excluding coded channels and confirm your choice with OK button on the remote control If you choose Yes coded channels will be included in the search In the list of channels they will appear after the channels that can be received freely If you choose the No option factory setting the coded programs will be automatically deleted in course of automatic sorting If later you need coded channels you will have to repeat the installation process Now highlight the option Start search and confirm the choice with the OK button on the remote control The symbol rates are standard values and ususally don t have to be changed exceptions listed in the chapter Receive special satellites Verschiusse tprogr Ja Suche starten SATI Symbolrate 1 27500 SAT 1 Symbolrate 2 22000 Sucheta t Page 8 SHARP After pressing the OK button you will see the following verschl sseltprogr Ja Suche starten SATi Symbolrate 27500 SATI Symbolrate 2 22000 Don t change anything and confirm Yes with the OK button on the remote control Now you will see the following Signalquelle ASTRA 1 The device has started automatic search for tv stations The installation of satellite channels may according to chosen settings or the chosen system configuration take more or less time After the end o
9. emove unwanted channels by moving from the list in a manner described below Using arrow keys choose the channel which is supposed to be moved With the B blue button you can mark the channel e g VOX The following Image appears DienstnummerDienstname Sperre nal UDersprngen Das Erste ZDF SAT 1 RTL Television Super RTL n tv ProSieben RTL2 wanien ZU _ 0005 Using arrow keys on the remote control choose the new position You can also look through the list of channels going 10 channels back or forth at a time by using the arrow key Left and Right on the navigation panel of the remote control Page 15 SHARP Further steps for moving channels in the following screen xo WI Ma ubersporingen Dienstnummer Dienstname 0001 Das Erste 0002 ZDF ann 0004 RTL Television 0005 VOX 0006 Super RTL 0007 n tv 00068 ProSieben 0009 RTL2 Zu ersetzenden Dienst w hlen 0005 VOX 0003 Confirm the newly chosen channel location by pressing OK button on the remote control The channel will be moved to the chosen location and the following channels will be moved one place ahead Page 16 SHARP 3 Receive signal from special satellites If satellites other than provided in the menu are received e g Turksat 4 or Eutelsat 4 5 in the satellite selection the point others can be chosen Satellitenwanhl SATilandere Weiter
10. f the automatic search the following image will appear Sollen die mit Kanalsuche gefundenen Kan le alphabetisch angeordnet werden Page 9 SHARP After choosing the mode of sorting and confrming it with OK the TV will Start displaying the tv station which is stored at channel slot number one Take into consideration the fact that the device may have more than one satellite channel list Depending on the chosen system configuration there could be up to 4 various lists which can be called up with the SAT button on the remote control They are named SAT 1 to SAT 4 and after changing channel or by pressing the Info button the name of the current list will be displayed in the upper right corner of the screen see photograph below Lists which are not needed e g in case of receiving Signal only from Astra can be hidden by using the menu see user manual Input skip RTL Television SAT 1 TV 0004 Audio DEU STEREO Dolby Digital Video Untertitel AUS w DOi Page 10 SHARP 2 Sort channels manuall When during the display of a channel you press the OK button on the remote control on the right edge of the screen a list of automatically sorted channels will appear If you want to change the sequence of channels it is posible by using 4 the menu Setup and the point Channel settings See the following Image Autoinstallation Kanaleinstellungen Kan
11. he latest software If necessary download software updates from the following website http www sharp de cps rde xchg de hs xsl htmlI service_downloads htm If the above mentioned error still appears after updating software it is recommended to to reduce the level of the satellite antenna with the attenuator In order to set the actuator correctly you can use the gauge of reception field strength and quality in the device menu Switch the tv on in the satellite reception mode and choose a free HD channel and later choose the following options Menu gt Setup gt Settings gt Channel settings gt Antenna setup digital Q gt Setup Bildeinstellungen Kanaleinstellungen Programm Einstellungen Possibly you will be asked to enter PIN code Enter the 4 digit PIN number Now choose Satellite set up the following image will appear Page 19 tellungen Kanaleinstellungen Antennensetup DIGITAL Satelit Set p Die Satelliten Einstellung ist wie folgt Satellitensystem Max 4 Satelliten auf DISEaC Multiswitch LNB Freauenz Satellit Tief Hoch ASTRA 1 9750 10600 ASTRA3 9750 10600 Hot Bird 13E 9750 10600 Turksat 9750 10600 cocoons 4 Choose Test antenna and the following image will be shown Signalst rke ol B Qualit t Using the attenuator change the input level of the device but during the process observe the Quality scale and using the atennuator
12. n the remote control You can find an overview of settings in the chapter Frequently asked questions in the appendix The example shows installation for a satellite device with an individual connection only Astra Page 4 SHARP After confirmation you will see the following image Satellitenwahl Don t change anuthing and confirm it with the OK button on the remote control Now you will see the following sit 7 7 Satellitenwah Hot Bird 13E ASTRA 2 ASTRA 3 Atlantic Bird 1 Atlantic Bird 2 Atlantic Bird 3 Euro Bird 1 Eutelsat W3A EutelSat W4 Hellas Sat 2 Hispasat inteSat 10 02 Intel5at901 NileSat PanAmSat Sirius 2 3 Telekom C Telekom2D TeleStar 2 Thor 2 3 Turksat andere Keine Choose the preferred satellite and confirm your choice with the OK button on the remote control in this example Astral You will now see the following image SAT1 ASTRA 1 VA mi b d rm SHARP 4 Choose Yes control Now you will see the following and confirm your choice with the OK button on the remote Confirm the displayed setting by pressing the OK button on the remote control An explanation of this setting can be found in the chapter Frequently asked questions in the appendix The example shows the installation for a satellite device with an individual connection only Astra After confirmation you will see the following image
13. obtain another switch criterion along with 14 18 volt and 22 kHz tone burst was introduced Here only one sequence of bits e g 0 satellite A or 1 satellite B is modulated onto the 22 kHz signal Highband 22kHz signal The 22kHz signal is required for switching between lower and upper sideband Thus the 22kHz signal is another switch criterion along with 14 18 Volt and is transmitted by the satellite receiver to the multiswitch LNB Toneburst switchbox switch for two satellites Page 22 SHARP 22kHz Switchbox is an electronic switch which is controlled with a 22kHz signal from the satellite receiver The switch can be found between the receivers and the satellite equipment Attention When this point is not properly configured it could happen that only one satellite will be found in a search usually the satellite which is connected to the first port OkHz of the switchbox Multiswitch Multiswitch is usually applied in order to distribute one or more satellite signals to many satellite ports in one house The main task is the distribution of signals delivered byLNB to individual satellite receivers Moreover its purpose depeding on the design is the feeding of terrestrial or cable tv signals into antenna lines to participants Repetition rate in DiSEqC operation The repetition rate shows how often the digital command from the satellite receiver should be transmitted to multiswitch Usually here the choi
14. set the possibly highest value It should reach 37 42 A value of over 42 is also good While setting quality pay attention to the Signal strength scale when quality is set at maximum the value of signal strength shouldn t sink below 60 dB so that also in bad weather the signal is sufficient After successful setting errors in reception of HD channels don t appear any more Page 20 SHARP 5 Frequently asked questions Why haven t satellites been fully searched Check the settings of SAT_system configuration e g individual or DiSEqC_system Why does the number of found channels seem too small Check the settings of SAT_system configuration e g individual or DiSEqC_system Why hasn t the device found the expected channels in course of automatic installation Please keep in mind that when searching through numerous satellites the device allocates channels to up to four SAT lists Make sure that your satellite equipment is suitable for receiving digital channels as also analogue LNC s can receive some channels old satellite equipment community equipment single cable solutions Why doesn t the device find all channels even after changing search settings It is possible that even during the repeated search the changed search settings are not applied so that the device doesn t receive all channels Just like earlier In such case using the Set up menu subpoint Reset reset the device to its default
15. setting Is it possible to go through the program list also in blocks i During normal operation of the tv it is possible to use Green and Yellow buttons in order to progress in blocks of ten chanels When sorting channels in the Set up menu you can use arrow keys Right and Left in the navigation panel you can browse through channels in blocks of ten Page 21 SHARP 6 Definition of terms concerning satellite reception This compendium was prepared with the aid of the Internet website www wikipedia de You can find further information concerning this subject on the same webpage DiSEqC Digital Satellite Equipment Control describes a digital control signal technology applied in the building cabling of satellite reception facilities DISEqC control signals compared to the 14 18 Volt and 22 kHz control signals enable broader range of functions in satellite reception DiSEqC switching commands are transmitted serially as digitally encrypted data words 22kHz Switchbox Switch for two satellites 22kHz Switchbox is an electronic switch which is controlled with a 22kHz signal from the satellite receiver The switch can be found between the receivers and the satellite equipment Attention When this point is not properly configured it could happen that only one satellite will be found in a search usually the satellite which is connected to the first port OkHz of the switchbox Toneburst To
16. ting of the device see user manual This will take a few seconds After this the image of first installation will appear on the device Page 2 SHARP 1 First installation When the device is switched on for the first time first of all you need to set the language and later the type of installation usually Home and at the end choose the country in which the device will be used After all these actions the following image will appear Dienstesuche durchfuhren Disttalsuche Analogsuche nes In order to install satellite channels choose Skip and confirm your choice with OK button on the remote control The following image will appear Satellitensuche starten Choose Yes and confirm your choice with the OK button on the remote control Page 3 SHARP The following image will appear Starten Sie die Dienstesuche Satellitensystem Nur ein Satellit LNB Frequenz Satellit Tief Hoch Keine Welter Einstellung andern Remain on the button Change settings and confirm the choice with the OK button on the remote control You will see the following Antennenanschluss Einstellung 2 Satelliten auf 22 kHz Switchbox 2 Satelliten auf Tonburst Switchbox Max 4 Satelliten auf DISEqC Multiswitch Satelllten Gemeinschaftsanlage Choose the setting applicable to your satellite device and confirm your choice with the OK button o
Download Pdf Manuals
Related Search