Sonic Boom Travel & Bed side Alarm Clock with Bed
Contents
1. Sonic Alert Amenca s Leader in Visteal Alerting Systems Sonic Boom Travel amp Bed side Alarm Clock with Bed Shaker IMPORTANT Please read these instructions carefully before use and retain for future reference See operating instructions on back Use only the supplied or recommended Sonic Alert adaptor to connect the unit Warning To prevent fire or shock hazard do not expose this appliance to rain or moisture Before connecting to mains make sure that the requirements specified on the apparatus corresponds to the available power supply i e AC100 240V The ventilation should not be impeded by covering the ventilation openings with items such as newspaper table cloths curtains etc No naked flame sources such as lighted candles should be placed on the apparatus It shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on the apparatus Do not place the product in closed bookcases or racks without proper ventilation OPERATION INSTRUCTIONS IMPORTANT please read these instructions carefully before use and retain for future reference FEATURES 1 Alarm 1 indicator AL1 9 Snooze Button Snooze Duration Adjustment Dimmer Control 2 Alarm Mode Switch 10 Tone Control 3 PM indicator 11 Alarm Selector 4 Alarm Off Button 12 Alarm 2 indicator AL2 Duration Adjustment Selector 7 Slow Button 15 Vibrator input 8 Ti2. M SELECTOR 11 to AL1 AL2 position the alarm indicators AL1 1 and AL2 12 will light up To Select Wake up mode To select the wake up mode slide the Alarm Mode Switch 2 to your desired position a BUZZ for sound b VIB for bed shaker cc VIB BUZZ for both sound and bed shaker NOTE once the wake up mode is chosen this will apply to both alarms Alarm Patterns When the alarm is activated alarm pattern of the buzzer flashing display will be out of sync with the vibrator This means that when the buzzer flashing display is ON the vibrator will be OFF and while the buzzer flashing display is OFF the vibrator will be ON ALARM 1 When Alarm 1 is activate it will have 3 beeps for buzzer then the vibrator This pattern is repeated until the alarm is stopped ALARM 2 When Alarm 2 is activate it will have 4 beeps for buzzer then the vibrator This pattern is repeated until the alarm is stopped Adjusting the Alarm Duration Time The default alarm duration time setting is 30 minutes you may adjust the alarm duration between 1 minute and 59 minutes as desired To adjust the alarm duration e Press and hold the AL SET button 5 for six seconds The clock display will show the default alarm duration as 30 Release the AL SET button 5 e Press the SLOW button 7 to adjust the alarm duration to the desired setting from 1 minute to 59 minutes e When the display is showin
3. at the same time the next day if alarm settings have not changed 2 To shut the alarm off permanently slide the Alarm Mode Switch 11 down to the OFF position The alarm will not come on until the Alarm Mode Switch 11 is set to VIB BUZZ VIB or BUZZ position NOTE The Alarm Off function of Alarm 1 and Alarm 2 is independent of each other Dimmer Operation There is a 5 level brightness control for the LED display Press the SNOOZE button 9 once to change the display brightness The brightness will cycle from 5 4 3 2 1 2 3 4 5 from bright to dim then from dim to bright NOTE The dimmer function will not work when the clock is in snooze mode Volume Control 1 To adjust the volume rotate VOLUME wheel 13 located on the lower right corner of the clock Tone Control 1 To adjust the TONE turn the TONE wheel 10 located on the top right corner of the clock Bed Shaker Vibrator See Figure B 1 Attach the bed shaker jack to the back of clock at VIBRATOR INPUT 15 2 To turn on vibrator slide Alarm Mode Switch 2 to VIB BUZZ or VIB position 3 Place vibrator between mattress and box spring Battery Backup To use the battery backup you can install a 9 volt alkaline battery in the back of the clock located under the Battery Compartment Cover 16 The battery needs to be purchased separately Note the LED display will not show during power failure but the cloc
4. g the desired alarm duration time it will return to the normal clock mode after 3 seconds The new alarm duration time setting becomes the new default and remains in the memory until you change it again Snooze Operation 1 When the alarm turns on in the morning you may press the SNOOZE Button 9 to stop the alarm temporarily The alarm will shut off for 9 minutes or for the predetermined time you select from 1 30 minutes and then turn on again The snooze operation may be repeated indefinitely until the alarm is turned off 2 The SNOOZE function of Alarm 1 and Alarm 2 is independent of each other Adjusting the Snooze Time The default snooze time setting is 9 minutes but you may adjust the snooze time between 1 minute and 30 minutes as desired To adjust the snooze time e Press and hold the SNOOZE Button 9 for four seconds The clock display will show the default snooze time 9 Release the snooze button e Press the SLOW Button 7 to adjust the snooze time to the desired setting from 1 minute to 30 minutes e When the display is showing the desired snooze time after 3 seconds it will return to the normal clock mode The new snooze time setting becomes the new default and remains in the memory until you change it again Shutting Off the Alarm Alarm can be shut off temporary for the day or permanently shut off 1 When alarm goes off press the ALARM OFF 4 button to turn off for the day and come back on
5. k will still be running and keeping proper time until the power comes back During a power failure the alkaline battery can only keep the clock IC running for up to 30 days During a Power failure the LED display will not show the time NOTE For the best results it is recommended that the battery be changed every 6 months If the clock is not used for a while it is recommended to remove the battery to avoid damage to the clock from battery leakage DC 9V Power Input Attach the DC POWER INPUT 14 to the back of DC9V IN next to VIBRATOR INPUT 15 it is the smaller input of the two NOTE IMPORTANT do not confuse DC POWER INPUT 15 with the VIBRATOR INPUT 15 GENERAL DATA UL listed Power Adaptor Input AC100 240V 50 60Hz Power Consumption Adaptor Output DC9OV 650mA CAUTION TO REDUCE THE RISK OF ELECTRICAL SHOCK DO The Lightening flash and arrowhead NOT REMOVE THE COVER The exclamation mark within the within the triangle is a warning sign OR BACK FROM THE triangle is a warning sign alerting alerting you of dangerous voltage PRODUCT NO USER you of important instructions inside the product SERVICEABLE PARTS INSIDE accompanying the product REFER SERVICING TO YOUR SONIC ALERT DEALER WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE Attention should be drawn to the environmental aspects of battery disposal bse This icon indicates separa
6. me Set Button 16 Battery Compartment Test Mode 1 Press and hold the Snooze 9 and Time Set button 8 for 3 seconds to enter the Test Mode The display will show 7ES7 to indicate it is in TEST Mode 2 If within 1 minute no button is pressed then it will exit the Test Mode and return back to the Time Mode 3 Press any button within 1 minute except the Snooze amp Time button which has no effect it will exit the Test Mode immediately 4 While in Test Mode sliding the Function Switch will demonstrate the different functions of the clock a Function Switch at OFF it will have a continuous Vee sound to indicate it is in the Test Mode b Function Switch at BUZZ it will demonstrate the buzzer sound c Function Switch at VIB it will demonstrate the vibrator d Function Switch at VIB amp BUZZ it will demonstrate the buzzer sound amp the vibrator 5 After finish with the Test Mode press any button except the Snooze amp Time buttons which has no effect it will exit the Test Mode immediately Setting the correct time 1 Press and hold the TIME Button 8 and at the same time press the FAST Button 6 or the SLOW button 7 to advance clock display until you have desired time 2 The lighted dot 3 located in upper left corner of the clock display indicates the time is PM For AM time this dot will not light up Setting the Alarm Time Setting Alarm 1 1 Slide the ALARM SELECTOR 11 t
7. o AL1 position the alarm indicator AL1 1 will light up 2 Press and hold the ALARM SET 5 button and at the same time press the FAST Button 6 or the SLOW button 7 to advance clock display until you reach desired alarm setting 3 Make sure alarm time is correctly set Setting Alarm 2 4 Once alarm AL1 has been set slide ALARM SELECTOR 11 to AL2 position the alarm indicator AL2 12 will light up 5 Press and hold the ALARM SET 5 button and at the same time press the FAST Button 6 or the SLOW Button 7 to advance clock display until you reach desired alarm setting Selecting 12 or 24 hours format For Europe the clock is set to 24 hour format while for UK the clock is set to 12 hour format Press and hold the Fast Button 6 for 6 seconds to enter the hour selection mode when the display shows 12 H or 24 H release the Fast Button 6 Press and release the Fast Button 6 to toggle between 12 or 24 hours If no selection is made within 4 seconds then the last displayed hour format will be chosen and the display will return to the normal Time mode Alarm Enable Alarms 1 To enable Alarm 1 slide the ALARM SELECTOR 11 to AL1 position The alarm indicator AL1 1 will light up 2 To enable Alarm 2 slide the ALARM SELECTOR 11 to AL2 position the alarm indicator AL2 12 will light up 3 To enable both alarms slide the ALAR
8. te disposal for electrical and electronic equipment Normal function may be disturbed by strong electromagnetic interference If this is the case normal function can be resumed by simply resetting the unit following the procedure in the instructions manual If function does not resume try moving the unit to another location SONIC ALERT S I YEAR LIMITED WARRANTY The Sonic Boom Alarm Clock Model SB200ss is warranted against manufacturing defects in materials and workmanship for one 1 year from the date of purchase Within this period Sonic Alert will repair or replace at our option the SB200ss without charge for parts and labor Simply contact our customer service department to obtain an RA return authorization number and instructions on how to process your product for return Call 1 888 864 2446 or e mail to RMA sonicalert info You ll need a copy of your receipt to process the return authorization SB200ss Cable Support SBB200ss Cable Support 2 ta To insert the cable support into the back of the unit push cable support straight into slot shown Make sure support is not at an angle push until it clicks into the designated slot Please note once the cable When support is inserted it cannot be removed designated cavity Cable Support fully inserted Made in China Sonic Alert Troy MI 48083 www SonicAlert com 1 888 864 2446 V TTY
Download Pdf Manuals
Related Search