1 Part Names 2 Specifications 3 Connectable Sensor
Contents
1. data REC ALM 128 TEMP 26 16 HUM 37 3 DEWP 10 30 coz 73675 REC ALM 1 28 DEWP 29 75 ACCUM TEMP 2650 Ch Normal display Accumulation display 3 Combined CO sensor and illumination ultraviolet sensor Composite measurement can be done by using the COz sensor GS CO2 and the illumination ultraviolet sensor GS LXUV each sold separately A WARNING f the CO2 sensor GS CO2 is included in the assembly it cannot be powered with batteries CO2 Sensor GS CO2 The GI100 s power is provided through a USB cable connection Illumination Ultraviolet sensor GS LXUV Branch adapter for GS GS DPA GL100 main module A CAUTION tis not possible to be used by connecting two same sensors 1 Screen display menu flow After power on the GL100 is ready for operation by holding down MENU key When the module is connected Module Type Recognition screen is displayed When the module is not connected Module Unconnected State screen is displayed Operate in accordance with the displayed instructions SENSOR ERROR Please connect QUIT key to Power Off BAT LAN Please wait GL100 C02 LX Sleeping ENTER key to start QUIT key to Power Off BAT LAN GL100 C02 LX Initializing 2 Free runnin2. CAUTION t is not possible to be used by connecting two same sensors 1 Screen display menu flow After power on the GL100 is ready for operation by holding down MENU key When the module is connected Module Type Recognition screen is displayed When the module is not connected Module Unconnected State screen is displayed Operate in accordance with the displayed instructions SENSOR ERROR Please connect the sensor QUIT key to Power Off Please wait GL100 co2 TH Sleeping ENTER key to start QUIT key to Power Off BAT LAN GL100 CO2 TH Initializingl 2 Free running screen STOP ALM 1 28 TEMP 26 16 HUM 37 3 DEWP 10 30 C02 736 BAT LAN SD S 10s 3 Setting Module unconnected state lt Operation gt Connect the module Recognition of module types Standby state lt Operation gt Press ENTER key Module start up Hold down the QUIT key approx three seconds to put the module into standby state Press the ENTER key while in standby state to return to the free running screen For the settings refer to USER S MANUAL of each module 4 Recording Press the START STOP key to start measuring with the set conditions Measurements of two sensors are displayed in the screen You can switch to the Accumulation screen with the lt and gt keys when recording
3. GRAPHTEC GS DPA UM 151 For GL100 Adapter for Branch adapter USER S MANUAL Thank you very much for buying this GRAPHTEC product This module can be used as a measurement adapter hereafter module that connects to the GL100 N GL100 WL These directions describe preparations and cautions before measurement To ensure safety please read the operation instructions etc For details on the warnings and how to handle this module please read the Quick Start Guide or USER S MANUAL included on the CD ROM included in the GL100 packaging Confirmation of the exterior After opening the package please confirm that there are no problems scratches and dirt on the exterior before use Confirmation of the attached items eUser s manual this book 1 If by any chance faults are found please contact the store where you bought the item Please note that items mentioned in this book may change without prior notice 604309191 MANUAL ADD 1 Part Names This section describes the name and function of each part 1 Hook portion __ 5 2 Sensor connector f 3 Connector PoriiLOGGER GLO G 000 x J 4 Cable packing GL100 main module 1 Wall mounting hole Used to mount to a wall 2 Sensor connector The sensor connectors are on the left and right 3 Connector ossee Used to connect to the connector on the GL100 module 4 Cable p
4. acking This packing is used when connecting the connector A CAUTION The GL100 has basic water protection but this module has no water protection Be careful when installing and handling e Before connecting to the GL100 always connect all of the sensors to the branch adapter and then connect e When using the CO2 sensor in combination with other sensors always use a USB cable connection as the power source The sensor connector is used for GS LXUV GS CO2 or GS TH only Please do not connect the device other than them The GL100 N GL100 WL may be damaged lt Extension cable gt The module can be used approx 1 5 m away from the GL100 by using an extension cable for GS GS EXC However you cannot connect and use multiple extension cables CAUTION It is not possible to be used by connecting two same sensors 2 Specifications Item Contents Number of connectors 2 channels Connectable sensor Temperature and humidity sensor GS TH Illumination ultraviolet sensor GS LXUV CO2 sensor GS CO2 Cable length approximate 20 cm Usage environment 10 to 50 C 80 RH or less non condensing External dimensions 46 x 66 x 27 4 mm not including protruding parts WxDxH approximate Weight approximate 68g 3 Connectable Sensor 1 Combined illumination ultraviolet sensor and temperature and humidity sensor measurement Composite measurement can be done by us
5. een ILLUM 4401 UV A 0 030 BAT LAN S D sss 3 Setting AMP settings can be set in this combination Raven 179 AMP input condition settings Hine kente On TIONRT ILLUM 2000 20000 200000 Ix UV A Range 30mW cm ILLUM Range 2000001xV For other settings refer to USER S MANUAL of each module 4 Recording Press the START STOP key to start measuring with the set conditions Measurements of three sensors are displayed in the screen You can switch to the Accumulation screen with the lt 4 and gt keys when recording data REC ALM 1 28 REC ALM 1 28 TEMP 26 16 DEWP 29 75T ACCUM ILLUM HUM 37 3 2410klx ILLUM 440 x 2 ACCUM TEMP a ACCUM UV A UV A 0 030w 2650Ch 0 030 vh BAT LAN SD 1 0s BAT LAN SD S 1 0s Normal display Accumulation display 1 Accumulation display 2 2 Combined CO sensor and temperature and humidity sensor measurement Composite measurement can be done by using the COz sensor GS CO2 and the temperature and humidity sensor GS TH each sold separately If the CO2 sensor GS CO2 is included in the assembly it A WARNING cannot be powered with batteries CO2 Sensor GS CO2 The GI100 s power is provided through a USB cable connection a En Temperature and humidity sensor GS TH Branch adapter for GS GS DPA GL100 main module A
6. g screen STOP ALM ILLUM UV A C02 BAT LAN SD 3 Setting Module unconnected state lt Operation gt Connect the module Recognition of module types Standby state lt Operation gt Press ENTER key Module start up Hold down the QUIT key approx three seconds to put the module into standby state Press the ENTER key while in standby state to return to the free running screen AMP settings can be set in this combination amp 179 co2 Range 9999ppm UV A Range 30mW cm ILLUM Range 2000001x AMP input condition settings Range __ ILLUM 2000 20000 200000 Ix For other settings refer to USER S MANUAL of each module 4 Recording Press the START STOP key to start measuring with the set conditions Measurements of two sensors are displayed in the screen You can switch to the Accumulation screen with the lt and gt keys when recording data REC ALM 1 28 ILLUM 4401x UV A 0 030 C02 736 IBAT LAN SD TENE ACCUM ILLUM 2410klx ACCUM UV A 0 030 wh REC ALM i BAT LAN SD PEE Normal display 503 10 Shinano cho Totsuka ku Yokohama 244 8503 Japan Accumulation display GRAPHTEC August 1 2014
7. ing the illumination ultraviolet sensor GS LXUV and the temperature and humidity sensor GS TH each sold separately Temperature and humidity sensor GS TH Illumination Ultraviolet sensor GS LXUV Branch adapter for GS GS DPA GL100 main module A CAUTION tis not possible to be used by connecting two same sensors 1 Screen display menu flow After power on the GL100 is ready for operation by holding down MENU key When the module is connected Module Type Recognition screen is displayed When the module is not connected Module Unconnected State screen is displayed Operate in accordance with the displayed instructions SENSOR ERROR Module unconnected state Plasse Sonainet the sensor lt Operation gt QUIT key to Power OFT Connect the module Recognition of module types Please wait GL100 TH LX Standby state Sleeping ENTER key to start a lt Operation gt Press ENTER key Module start up GL1O0O0 TH LX Initializing 2 Free running screen Hold down the QUIT key approx three seconds to put the module into standby state When running on batteries the module will STOP ALM TEMP 26 HUM 37 3 automatically go into standby state after three minutes of no operation Press the ENTER key while in standby state to return to the free running scr
Download Pdf Manuals
Related Search