User manual for DTT VOIP-GSM 8-16
Contents
1. LAC 2503 Cl 104E LAC 25003 Cl Car MEC 42502 MEC 42502 BSI 35 BSC 13 BUCH 587 BUCH 610 LAC 2805 Cl 1bFa8 RSSI 96 db MEC 42502 RSSI 81 db f LAC 2503 cl 1DF9 LAC 25003 Cl 1040 pl 70db MEC 42502 MEC 42302 BSc 4 BASIC B1 BUCH 607 BEH 608 RSSI 95 db RSS 50 db MEC 42302 BSE 12 BCH BOS RSSI 91 db 1 The middle cell is the cell that the SIM is connected to 2 Around it are all the surrounding BCCH cells the gateway is detecting 3 For each cell there is the following information e LAC Location Area Code e CI CellID e MCC Mobile Country Code e BSIC Basic Station Identity Code e BCCH Broadcast Control Channel e RSSI Receiver Signal Strength 4 You can choose a BCCH channel by clicking on the cell The module will automatically register in the new BCCH 5 You can close the BCCH Control window by clicking on the X button in the middle of the window 35 piscovery telecom Sending SMS To send SMS press the Send SMS tab Port 1 E e Ta e Refresh SMS Status READY Format Unicode ucs Right to left Message Font Save CharCount 0 70 Split into 1 PDUs Phone Number Ll SMSC Number 972521100059 Bulk Mumbers Pe del E Send Select in the Format box the format of the SMS Check the Right to Left box when writing in a language from right to left Enter the SMS message in the Message box2. Select in the Type the form of the Time Table Monthly or Weekly Select in the Swapping Type to work by Time table Select a SIM from the list of available SIMs at the top The list is organized by the SIM Servers L1 at the top of the list is the SIM on board the SLAVE card At the top of the Time table is the dates and on the left is the hours Each time slot is for an hour Left click will select the SIM for this time slot and mark it with is number To unselect a time slot simply click on it again You can t choose a SIM that is already in use at that time in the gateway After setting all the needed SIMs press Save Assigning the SIMs to work for duration of time 1 2 3 4 d 10 11 12 13 Select a port from the list of the ports in the left Select in the Type the form of the Time Table Monthly or Weekly Select in the Swapping Type to work by Call Duration Select a SIM from the list of available SIMs at the top The list is organized by the SIM Servers L1 at the top of the list is the SIM on board the SLAVE card At the top of the Time table is the dates and on the left is the place on the list Left click will select the SIM for this time slot and mark it with is number A dialog box will open Enter the units for this SIM The current count of the units of the SIM will appear in the brackets To unselect a time slot simply click on it again You can t choose a SIM that is already in use at that
3. 1 Dial the number of the SIM card in port 1 2 Hear a dial tone 3 Dial 9 the prefix for VoIP in this setting and the VoIP e xtension number 4 Dial to send the number Dialing from a VoIP extension to a GSM mobile phone To call from a VoIP extension to GSM mobile phone with the default prefix settings 1 Pick up the VoIP extension and hear a dial tone 2 Dial the GSM mobile number 3 Dial to send the number 4 The call will route through one of the GSM ports 17 iscovery telecom Chapter 4 4 Local SIM The local SIM is the SIM on board the slave The setting will take effect when the local SIM will register on the GSM Network e PIN Code The PIN Code for the SIM when the SIM is PIN Code protected e CLIR Show or Hide the number of the SIM e Net ID Locking the SIM on a specific network e BCCH Locking the SIM on a specific BCCH When empty he will lock on the best reception BCCH e BCCH Timer Rotating the BCCH To rotation will be every BCCH Timer in seconds between all the BCCH that have a reception better then the BCCH rssi e BCCHrssi The minimum reception for rotation e Bill Interval The interval for each unit see Call Duration e Units per Interval The units for each interval see Call Duration e Recharge Value Current Balance Currently not in use 18 iscovery Chapter 5 VoIP Settings Communication through a VoIP2ALL is performed via ports Each VoIP2ALL has 16
4. 11 8 16 52 0 0 k FXO 3 2 19 11 B 16 582 14 19 11 B 15 52 151 19 13 B 16 52 36 5 The CDR format is e Calling Number e Called Number e Origin Channel Port number where 33 is internal VoIP e Destination Channel e Start Time e Connect Time e End Time e Release Cause Note All the times is in the format Day Month Year Hour Minute Seconds 25 iscovery telecom This window lists all the SIP Accounts that are registered in the SIP Server Press the Sip Status tab to see General Prehines Users count Chapter 5 6 SIP Status user ID user Hame user IP 1243210 16 2 34 10 16 2 34 1256 210 156 2 253 10 16 2 253 Press Refresh to monitor the SIP accounts that registered in the gateway The User ID is an identification number in the Sip Server for this account The User Name is the sip account number The User IP is the IP Address of this sip account E E m 26 iscovery telecom Adding a New SIP account 1 2 9 4 Open the configuration page of your SIP phone Enter in the SIP Server parameter the IP address of the gateway Enter in the SIP User ID parameter the number you chosen for this extension If the Authentication option at the SIP tab is enabled then e nter in the Authenticate Password the password for this client Save the settings and restart Press Refresh to see the SIP account in the list Note For each VoIP account there must b
5. 2 Press SAVE Note You must restart the gateway to activate the settings Removing a Country from the List 1 Press the Remove button of the country you want to delete from the list 2 Press SAVE 24 iscovery telecom Press the CDR tab to open the window that s control the setting of the Calls Reports Chapter 5 5 Calls Report Records Settings The records of the calls are saved in files inside the gateway Check the Active check box to activate the Calls Reports Re cords Check the VoIP Filter if you don t want to record the VoIP calls Enter in the File Size box the maximum size that each CDR file could be Enter in the File Amount box the maximum CDR files that would be saved in Doe prae the memory 5 To see the CDR files enter in the web browser the address of the gateway the default is ftp 10 16 2 245 you will see the files of the gateway Enter the conf directory the CDR files are in the CDR directory Select the latest file and open it ftp 10 16 2 245 conf cdr cdrfile00001 Windows Internet Explorer er ftp 10 15 2 245 conf cdrjcdrFileQOQ01 v gt XK wr ode B ftp j 10 16 2 245fconf cdrfcdrfienonot EX37 0525974960 2 0 1 1 0 0 1 24 1 1 0 0 1 31 1 1 0 0 1 38 5 FX57 0525974960 2 0 159 11 8 16 50 58 19 11 8 16 51 T7 19 11 8 316 51 16 5 126 0525374960 33 0 19 11 8 16 51 41 19 11 8 16 51 51 19
6. Connecting the Cables ssssssesese een mmm ee nenne 10 Chapter 2 Installing the Manager Application eee eere nnn 11 Chapter 2 1 Install the VolP2ALL Management Application into an MS Ero ade 11 Chapter 3 Configurations with the VoIP2ALL Management Application 12 Chapter 4 Ports Set Es uve cv cececnccanie sane osbixia veri vvR IV E LPS FaV e mi GoUPEOIPI P add bead usd vu EPA OP UE 14 Chapter 4 1 General Settings sse een memes enean 14 Crater AZ Wie TA ONG RET m E E 15 ChaptereL3 PRCT CS soroen n a EA casual ETETE IUD SS du UR DI S CUM GR P RM MM UGG 16 Chapter amp o Local SIM ee 18 Chapter 5 VolP SO ELIE S quid dia vis VIR ANTON TUS ce seaussvseusaeeiececaeosnauneusasteucsesatoinsesssosiselaies 19 Chapter 5 1 General Settings cccccececececseeeeee eene meme nmm enses ees 19 Ghabr r 5 2 TONGS Se HS areca sean qutt edu et ases ds MuT MU MEI MEIN DUM MN RD MES 21 Chapter 5 5 SIP Server Sene S arerin ete ebE A UHR QUIS SEFIOXEVEEEE LIES LO rp ERR VES PEE LESS 22 Chapter 5 4 FXO SO IS eee an ne ee ee ene a tesa bra eres t eee 24 Chapter 5 5 Calls Repot Records Settings sseees esse 25 Chapter 5 6 SIP Status ccccecececseseseececee nemen memes em ems ense sss sese serena 26 Chapter 6 SIM Server osse ivi di sevtevad sdS pentose PUPSEITUITRKRUTDL SOS M aos Veg TRI MI GUF IS V PUMP DNE 28 Chapte
7. i webDAV instead Learn more about using Web Folders Log on anonymously Save password Enter root in the User Name box The Password box should stay empty Press Log On and the Ftp files window will be open Ie DU C E You can copy or delete the calls reports files in the cdr folder 40
8. iscovery telecom VoIP2ALL Gateway 16 Channels Version 2 1 User Manual Note The most updated VoIP2ALL Gateway manual is located on our Web site at www dtt tw in the download section Check this site for latest updates Connecting VoIP Directly to Cell Phones prscoven telecom For additional assistance please contact us Support Team Discovery Telecom Technologies Salt Lake City USA Tel 1801 7900348 Skype discoverytelecom Email info dtt tw Web www dtt tw Usage Warnings High voltage transients surges and other power irregularities can cause extensive damage It is the user s responsibility to provide a power protection system It is the user s responsibility to install operate and maintain the system in accordance with all applicable codes regulations and safety measures Trademark and Patents All trademarks patents and copyrights apply General Manual Notes Without a notice and without obligation the contents of this manual may be revised to incorporate changes and improvements Every effort has been made to e nsure that the information is complete and accurate at the time of publication Nevertheless Discovery Telecom cannot be held responsible for errors or commissions The screen snapshots in this manual may have older version labels than your delivered package version iscovery telecom Dear Customer We thank you for purchasing our VoIP2ALL Gateway The
9. GSM ports and a VoIP port For each port you can define how to access him and what to do with calls that s come from him This chapter explains the assigning of prefix to a port and the allocation of calls to the VoIP2ALL Gateway ports es Press P to open the VoIP setup window Chapter 5 1 General Settings Press the General tab to see General SIF Status IP Settings IP Address 192 168 0 48 Gateway 192 168 0 1 Subnet Mask 5528500 Port oz Dial Settings Wait for Dialing secs EL Last Digit Timeout secs Bo Debug Level ho e No Replay Timeout 15 DELA seconds 5 SAVE 19 iscovery telecom IP Settings Changing the IP Address of the Gateway The gateway is connected to the net with one IP Address in 3 different Ports 2007 the port of the gateway 2008 the port of the SIMs 2009 the port of the Internal SIM Server Changing the IP Address of the unit will change the IP Address for both the gateway and the internal SIM Server 1 so M M LM Connect to the gateway with the current IP address port 2007 Open the VoIP window the General tab Enter in the IP Address box the new IP address for the gateway Enter in the Port box the new port number for the gateway Press Save Disconnect from the gateway Restart the gateway wait 30 seconds for initialization and connect with the new IP address Dialing Settings 1 Enter in the Wait for Dial
10. Press the Font button to select a different font Press the Save button to save the SMS Enter in the Phone Number box the GSM number to send the SMS to In the SMSC Number you see the number of the SMS server Vo dee eS Tm Enter in the Bulk Numbers the list of GSM numbers when needed to send to the SMS to many numbers 9 Press the Send button to send the SMS To Send SMS e Write the SMS message in the Message box e Enter the number to send the SMS in the Phone Number e Pressthe Send button 36 iscovery telecom Receiving SMS 1 When SMS will arrive from the GSM network an icon envelope will appear in the monitor Gateway Monitor Edb NetID 42502 BCCH sagycso fbb NetID 42501 BEEH 7 PBCEI Port 1 e E e Config Send SMS Refresh i Port 1 SIM 1 Sender 972525974960 SMSC 972521100059 Time 12 11 2008 14 27 44 Message HELLO YORAM SAMPLE SMS SMS Count 1 3 Press Delete to deletes the massages 4 Press the Font button to select a different font 5 Pressthe Save button to save the messages 37 prscoven Appendix A Com Port The Com Port connection give you direct access to the Linux based operating system files of the DSP 1 Connect the Com Cable from the gateway to the PC RS232 Com Port 2 Connect the Hyper Terminal press Disconnect than Properties 3 Inthe Connect To tab press Configure The Po rt Setting should be COMT Properties Port Settings Parity
11. any of the SIMs in the SIM Servers at any given time The Gateway can be configured to direct the calls through the most economical SIM KC uM ue a j P Li Ww X fae EP PC Management Mobile MS Window s Application Cell Phone ERA i wes l IP Phone E ca x 4 FA a O ai M 2 ae 5 f E E LEE E Mobile 5 aes j F l z CellPhone EA i p IP Phone RIA Ay Cc P NETWO n 2 s pi tas a Re i VOIP EB BM iim c me X Es EN s Pes he br My Lal Mobile ETA Cell Phone MS E ELA IP Phone Mobile GSM Cell Phone iscovery telecom Chapter 1 Installing SIM Cards and Conn ecting the Cables The Gateway has a one master card at the left 4 Slave cards at the middle and 2 SIM card at the left Chapter 1 1 Installing the SIM Cards in the GSM cards Insert the SIM cards into the Gateway as follows Each GSM slave card has 4 GSM channels in it On the bottom of the each GSM card there are 4 slots for the SIMs Position the SIMs in the slots so the SIM metal contacts facing downward and the snubbed triangle inwards Push the SIMs until you hear a click The SIMs now is in place Note To extract the SIMs you need to push and release the SIM the SIM will be free from the switch and then pull it out Chapter 1 2 Installing the SIM Cards in the SIM Server cards Insert the SIM cards as follows Open the screws that secure the SIM Server card
12. to the case Pull the SIM Server card out Each SIM Server card has 32 SIM cards chambers in it The chambers are marked from 1 to 32 To open the chamber slide the metal part inward and push the chamber up Position the SIM in the chamber so the SIM metal contacts facing downward and the snubbed triangle outwards Insert the SIMs in the chamber Push the chamber down toward the card Slide the metal part of the chamber outward until the SIM is locked The SIMs now is in place Slide the SIM Server card back in to is place The LEDs will blink slowly and then rapidly prscoven telecom The gateway will scan the information of the SIMs When he will finish the LEDs will stop blinking Note After extracting a SIM Server card y ou have to wait 30 seconds before sliding it back for the gateway to recognize that it was extracted Chapter 1 3 Connecting the Cables LAN cable The LAN cable is used to connect the system to the internet network connect the LAN line to the left RJ 45 marked LAN the right RJ 45 that marked LAN are not in use Com Cable Connect the Com Cable from the PC RS 232 comport to the left RJ 45 marked COM the right RJ 45 that marked COM are not in use Antennas Connect for each GSM port the anten na Position the antennas 20 centimeters apart and more then 1 5 meters from the gateway Power cable Connect the power supply cable from your 110 240V 50 60Hz power outlet to the VoIP2ALL Gatew
13. 6666666 3 4 Bal red 102 b2z r7 4 3 Avi Cohen 103 0525885585 5 f B d 1 11 12 a 14 15 ID Lr i stn number first name EE capabilities last name LP m voip number D 1 i Secret gam number active features Adding a User To add a new user to the list E nter this values and press the Insert button Updating 6801080 D 6801061 6901082 B Banus D p T F ID The User number in the list First Name Last Name VoIP Number GSM Number PSTN Number Capabilities What this user can do Active Features Not active in this version All Users voip number gsm number pstn number capabilities active Features Secret Update Delete 111 update delete eee update delete J33 update delete 444 update delete Secret The SIP authentication password a Number in the List 30 1 INSERT i Count 4 update delete pdate delete update delete update delete update delete pdate delete update delete i Ga update delete Update delete dete delete pel delete prscoven telecom To update a user 1 Locate the user on the list 2 Change in that line the values of the user 3 Press the Update button of the user 4 Press OK to confirm update Deleting a User from the List To delete a user 1 Press the Delete button of the user located at the end of the user line in the list 2 Press OK to confir
14. Metric i1 RE Bae ES 3745 errors 4 dropped H overruns frame H I4 packets 3766 errorz H dropped ouerruns H carrier collisions 6 txqueuelen 1608 Ra bytes 492876 481 3 Ki TX bytes 750799 0733 2 KiB5 Link encap Local Loopback inet addr 127 H H 1 Mask 255 H H H UP LOOPBACK RUHHIHG HTU 16436 HMetric i RE packetz BH errors BH dropped H ouerrunz B frame TH packetz BH errorzs BH dropped H ouerrunz H carrier H caollisions BH txqueuelen H Ra hutezs H 8 8 E gt Tk hytes H CH H B Connected 00 01 40 AMST 115200 8 N 1 12 The IP Address of the gateway is marked in a red circle 39 iscovery Appendix B Direct Access to the ftp Files This access to the ftp files is for copying and deleting the calls report files and for upgrading the firmware Warning Any change in the ftp files may result with the gateway not working properly Open My Computer on the desktop In the Address bar enter ftp 10 16 2 245 When 10 16 2 245 is the IP address of the gateway 3 Press Enter You will see this window Log On As e Either the server does not allow anonymous logins ar the e mail address was nat accepted FTF server 192 158 0 98 User name m Password ii After vou lag an you can add this server to your Favorites and return to it easily FTP does nok encrypt or encode passwords ar data before sending them to the server To protect the security of your passwords and data use Web Folders
15. Module Status OPER Refresh IMSI Number 425010101225952 IMEI Number 355330000114404 Caller ID By network hi SiM Number SIM 1 Operator ID 1 989989 O Any jo f Auto BCCH Lack BECH Lock 1 251 7 512 1023 J BCCH Control BCCH Random RSSI select from list I Timer 30 65535 sec Gs Connect Hetwork Disconnect Network Select the SIM Number for this setting Enter in the PIN Code box the PIN code of the SIM when needed 3 Select a Caller identification option in the Caller ID list e To enable the GSM network to set caller ID standards select Network e To disable identification of the SIM select CLIR Suppression e To enable identification of the SIM select CLIR Invocation 4 To assign the SIM to work with a specific GSM network in the Operator ID enter the GSM network operator ID from 1 999999 Enter O to work with the SIM operator 5 There are three methods of selecting the BCCH e Auto BCCH Lock The SIM will register with the BCCH with the highest RSSI e BCCH Lock Lock the SIM to register at the defined BCCH Enter in the box the BCCH number e BCCH Random The BCCH will rotate every specified time Select in the RSSI the BCCH minimum level of reception to register Enter in the Timer the time for each rotation 34 prscoven telecom 6 Press the BCCH Control button to monitor the BCCH cells MCC 42302 BASIL 28 BUCH 559 R3 76 dh
16. N lone Stop bits 1 Flow control None Restore Defaults 4 Press OK and move to the Settings tab 5 Press ASCII Setup ASCII Setup ASCII Sending Send line ends with line feeds Echo typed characters locally Line delay fr milliseconds Character delay 0 millisecends ASCII Hecerving Append line feeds to incoming line ends Force incoming data to 7 bit ASCII Wrap lines that exceed terminal width 6 Sett this settings and press OK 7 Press Connect in the Hyper Terminal 8 When restarting the gateway you will see the initialization process Wait until it finished 9 Press the Enter button On screen you will see 10 To see the IP settings write the command ifconfig and press Enter 38 DISCOVERY telecom 11 On screen you will COM44 HyperTerminal File Edit View Call Transfer Help 51321x PCMStop 51321x RingStop mtSTANDBY calling ProSLIC_PCMStop and ProSLIC HingStop on on channel channel B 51321x PCMStop 51321x RingStop FROK change channel state to off hook gt FROK change ch annel state to on hook gt FROK change channel state to off hook gt FROK change ch annel state to on hook amp H HusyBox v1 2 2 4 2HB88 82 26 897 22 HHHB Built in shell Cash gt Enter help for a list of built in commands H ifconfig encap Ethernet HWUaddr BHWH 7BH 8F H4d CHz 7H addr 1H 16 2 VR Bcazt 1H 255 255 255 Mask 255 255 255 48 Mb CAST MIU 15HH
17. ay power connector After connecting the power to the gateway all the LEDs in the master will go on while the initialization process continue At the end of this process the LED that marked 2 will start blinking and the LED that marked 1 will go off 10 prscoven telecom Chapter 2 Installing the Manager Application Before operation configuration settings must be made in the VoIP2ALL Configuration is done on an auxiliary computer by using the VoIP2ALL Management MS Windows Application provided for MS Windows operating system Chapter 2 1 Install the VoIP2ALL Management Application into an MS Windows PC 1 Insert the VoIP2ALL Management installation CD into the CD drive of the PC 2 In Windows Explorer navigate to the installation CD drive setup exe We Setup exe l InstallShield Softw 3 Double click to install the Management Application 4 Click Next 5 The Setup Type window will open 6 Select Complete and click next 7 Click Install The VoIP2ALL Management application installs itself Wait until a completion message will appear 11 prscoven telecom Chapter 3 Configurations with the VoIP2ALL Management Application After installing the Management application launch it and define the Connection between the PC and the VoIP2ALL as described below WoIPZ4LL 4 0 beta 50 exe Launch the VoIP2ALL Management by pressing on your PC desktop or by pressing Start gt Programs gt Discover
18. dec 4 PcMamoDO delete Codec 5 pcmasooo io delete Codec 6 PcMa ong e o Codec pcwasooo Auhentication D Codec8 pcmasooo Realm leurotech SAVE Press Refresh Select in Codec 1 to Codec 8 the priority of the Codecs The SIP Server will try to connect the VoIP calls using the first Codec if it isn t possible it will try the next 3 Check the Authentication checkbox when you want that the Users will need a password to register in the gateway SIP Server 4 The SIP Port RTP Start Port RFC2833 Payload Type indicates the current settings of the SIP Server 22 iscovery telecom Connecting the gateway SIP Server to external SIP Server You can connect the SIP Server of the gateway to external SIP Server by adding a host in the Hosts table When the SIP Servers are connected you will be able to make calls from one SIP Sever to another Adding a Host to the Hosts Table 1 Enter the Name you selected for the Host Enter the IP Address of the SIP Server you want to register in Enter the Port number of the SIP Server the Default is 5060 Enter the User number the number to call the Gateway in the external SIP a 19 Server Enter in the Secret box the authentication number when needed Press Enter Press Save to update the new Hosts Press the Restart Gateway button in the System Window to restart the pe DL SZ gateway While restarting the gateway will register in the external SIP Serv
19. e GSM Antennas To be installed to the VoIP2ALL LAN connection cable for VoIP2ALL connection to the internet TCP IP Cross Cable Red Cable for connecting the gateway directly to the PC Network Interface Card RS 232 Serial PC Comport connection cable RJ 45 to RS 232 COM for debugging and direct access to the config uration files Will be referred as Com cable in this manual Software Installation CD Installation kit of the gateway Manager CD for MS Windows Management Application including the User Manual file and additional auxiliary utilities prscoven telecom The 16 Channel VoIP2ALL Gateway Solution Overview The 16 Channel VoIP2ALL Gateway which will be referred as the VoIP2ALL in short is a gateway that can connect VoIP calls to the GSM Network The VoIP2ALL has a built in SIP Server that can register up to 32 VoIP clients The Gateway c an connect each of his VoIP clients to the GSM network directly completely bypasses the local landline telephone company The VoIP2ALL has 16 GSM ports and a VoIP SIP Server You can program how to connect the ports VoIP2ALL can connect VoIP Client to another VoIP Client You can even call from one of the GSM ports and go out on another GSM port Each GSM port has one SIM In addition the gateway has the option of a built in SIM Server of two cards of 32 SIM each The gateway also has the ability to conne ct external SIM Servers Each GSM port can be programmed to work with
20. e a User in the User List That User must have the same VoIP number as the VoIP account and the secret to match the authentication password 21 iscovery Chapter 6 SIM Server The gateway can connect to SIMs in internal and external SIM Server In this window we define to what SIM Server the gateway will connect and what will be the settings for each SIM in this SIM Servers Open the Virtual SIM window SIM Servers Setting SIM Servers List SERA it IP Address Pot SCAN Delete Portl List SIM 1 1321550 48 2009 SCAN delete CI 2 SCAN delete IMS 3 SCAN delete IMEI 4 SCAN delete Desc empty 5 SCAN delete B SCAN delete Core D SCAN delete Recharge Value 0 5 SCAN delete Bill Interval 9 SCAN delete Units Per Interval 0 10 SCAN delete Current Balance T SCAN GE PIM Code i By network Y Mat ID BCCH BCCH timer BCCH resi 111 db w i SIMI SIM Al aS COFtERGTR O Synchronization Save Servers 6 1 Adding a SIM Server to the SIM Ser vers List 2 Enter the IP address and the port of the SIM Server you want to connect to 3 The default pot for a VoIP2ALL SIM Server is 2009 4 You can connect to up to 20 SIM Servers 5 Pressthe Save List button 6 2 The SIM Server settings 1 Press the Synchronization button The getaway read the SIMs list from each SIM Server that he is connected to 2 All the SIMs that in the SIM Servers will appear at the list The list is arra
21. e g V mark when done e Mandatory Check package items delivered in your package Refer to the Check your Package Items chapter in order to see if all items which should be in your package are delivered e Mandatory SIM cards installation and connections o Install SIM Cards o Install Antennas o Install LAN cable Refer to Chapter 1 SIM Cards Installation and Cables Connecting for specific and detailed guidelines iscovery telecom Mandatory Install the management a pplication Install the MS Windows Management Application on the PC Laptop allocated for the system management Use the provided CD Refer to Chapter 2 Installing the Manager Application for further information Mandatory General configurations In order to operate the system mandatory basic setup steps should be performed by using the LAN Mandatory System configuration Use the LAN connection and VoIP2ALL Management MS Windows application You can use this method for later day to day management for monitoring and reports of the VoIP2ALL activity The gateway system via IP is highly recommended as you can have the management done remotely from the system via internet connection iscovery telecom Check Your Package Items Please verify that your package contains the following components some were ordered specifically before installation Main Hardware Device The 16 Channel VoIP2ALL Gateway 110 220V 50 60Hz Power Cabl
22. er 9 Connect again to the gateway 10 If the registration succeeded the Status will change to Reg 11 Go to the Prefixes window and define a prefix for this Host Calling to External SIP Server VoIP Client To call a VoIP Client in the external SIP you need to dial the prefix of the Host and the number of the VoIP client Calling from the External SIP Server To call the gateway from the Host you need to dial the User name you will get a dial tone then you dial the desired number like any other call in the gateway it will go according to the prefix of the number 23 prscoven telecom Chapter 5 4 FXO Settings In this window we control the set ting of the FXO port Note This window relevant only in gateways with FXO ports Press the FXO tab to see Current Country ISRAEL i ISRAEL Remove Add Country Dial Tone Country Mame Disconnect Tone Ringing Tone POLAND Remove Dial Tone Disconnect Tone Ringing Tone Adding a New Country to the List 1 Enter in the Country Name the name of the country you want to add and press Add 2 The new country will appear on the list Press on the sign near the Dial Tone to open the Dial Tone settings of the country Enter for each parameter the setting of the PSTN in that country Dothe same for the Disconnect Tone and the Ringing Tone 5 Press SAVE Changing the Current Country 1 Select the list the Current Country for the FXO settings
23. information in this manual does not constitute a warranty of performance although the information has been compiled and checked for accuracy by Discovery Telecom Ltd All our products are developed and produced by experienced engineers who aspire to achieve customer satisfaction utility value and reliability of products Warranty Policy The product you have purchased is under warranty of 12 months from the date of purchase by the original purchaser In case of defects of materials or workmanship Discovery Telecom will replace it free of charge This warranty applies to hardware software but does not include SIM Cards This warranty will not be honored if the device has been mishandled in any Way We hope you enjoy our product and we will be happy to receive any comments you may have This will enable us to improve our products and the technical support that we give to every customer iscovery telecom Table of Contents User c REED 1 GetUnP Started ioci sida osi oat VA uiu OS Pass oh ew Sic duppONE IP P CIN Prid Se Dec ERE I P DEC UnES 2 Check Your Package Items ocesscusexdesdu Uti UTI raro Ore aude EPI DNE REEL ERN DUDUVINDa PN CMM ME LV PRu UNT 7 The 16 Channel VolP2ALL Gateway Solution Overview eere enr enne 8 Chapter 1 Installing SIM Cards and Connecting the Cables 9 Chapter 1 1 Installing the SIM Cards cccccccecececseeeeeee ee meme 9 Chapter 1 2
24. ing the time in seconds the gateway will wait for the first digit to be dialed Enter in the Last Digit Timeout the time in seconds to wait between the last digit dialed and the calling of that number Enter in the Debug Level the amount of detail to be shown on the Debug Screen Enter in the No Replay Timeout the number of seconds with no answer the gateway will wait before calling the next number In Priority or Cyclic mode Enter in the DELA seconds the number of seconds each DELA number will Stay in memory Press Save to activate all the changes 20 iscovery telecom In this window we can set the tone for each port Where Rx is the tone of the Chapter 5 2 Tones Settings speaker and Tx is the tone of the microphone Press the Tone tab to see Adjusting the Tones 1 Press on the right side of the tone bar a slider will appear Slide the slider or change the level number in the middle to the desired level From 30dbm to 30dbm Repeat this action for all the tones you need to adjust 3 Press Save to activate the changes 21 prscoven telecom Chapter 5 3 SIP Server Settings In this window we control the setting of the SIP Server Press the Sip tab to see SIP Port RIP Start Port Part User Secret Delete 1 15 2 245 ABO 100 111 delete RFC2833 Payload Type delete delete delete Codec 1 PCMA 3000 w delete Codec PCMA 8000 x delete T delete Codec 3 PCMA 3000 delete Co
25. m the delete Searching for a User To find a user in the list 1 Select in the Search Field box by which field to search Enter the Value to search Press the Search button The list will show all the users that come up on the search 1 SE E To return to the complete list press the All Users button 7 1 The User Capabilities DELA The DELA is a way for a GSM mobile phone to get back to the VoIP extension that called him 1 Change the Capabilities value to 1 to enable the DELA for the user 2 When a call from the VoIP to the GSM number of the user is made the gateway will save the number of th e extension that called 3 Enter in the DELA box in the Prefixes tab that at the VoIP window the number of seconds the gateway will remember the extensio n number 4 fin that time the user will call the gateway from the GSM number the gateway will give him a dial tone to call He could dial any number or press to return to the extension that called him 5 fafew extensions called the user Pressing will go to the first extension that called at the next GSM call Dialing will go to the next extension that called 6 Each extension number will be called once 3 iscovery telecom Callback The Callback is a way for the User to make the gateway call him and make the call on the expense of the SIM 1 Change the Capabilities value to 8 to enable the Callback for the user 2 When a call comes from the GSM number of the u
26. nged by the SIM servers Each SIM Server has cards called ports starting from portO Each card has the SIMs from O to 32 according to their location on the card 4 Foreach SIM you can setup the setting in witch the SIM will work with 28 iscovery telecom e PIN Code The PIN Code for the SIM when the SIM is PIN Code protected e CLIR Show or Hide the number of the SIM e Net ID Locking the SIM on a specific network e BCCH Locking the SIM on a specific BCCH When empty he will lock on the best reception BCCH e BCCH Timer Rotating the BCCH To rotation will be every BCCH Timer in seconds between all the BCCH that have a reception better then the BCCH rssi e BCCHrssi The minimum reception for rotation e Bill Interval The interval for each unit see Call Duration e Units per Interval The units for each interval see Call Duration e Recharge Value Current Balance Currently not in use 5 This setting will take effect when the SIM will register in the GSM network 20 Chapter 7 Users DISCOVERY telecom The identification and authorization for each action in the gateway is done by defining users You can define up to 500 users For each user you can define the numbers he uses and a different action for his calls Press sers to open the Users window Search field E Value Search ID first name last name 1 1 Aslan Lanz 100 0525555555 2 2 Mark Adar 101 052
27. orts After setting the clock define the prefixes for each port as described in the following chapter 13 piscovery Chapter 4 Ports Settings In this window we define the settings for each port We can define when each port will work and with which SIM he will register in the GSM network Open the Ports window z YoIP2ALL System ver 4 0 IP 192 168 0 48 2007 Sowa Sev EK Disconnect Voip System Users Ports Virtual SIM Debug Monitor Gateway Time 10 42 52 19 03 09 Gateway ESH 96 100048 Monthly Swapping Type Time Table Clear Table Refresh E Save 104962 19 09 09 4 1 General Settings Select General from the ports list on the left 1 Enter in the Internal Srv the IP address of the Internal SIM Server The IP Address of the gateway should be written here If it is empty the gateway will connect to the Internal SIM Server through the LAN not internal bus 2 If Default Sim is enabled the gateway will use the SIMs in the SLAVE cards as default if no other SIM is assign to the port at that time If disabled the gateway will load only the sim that assign in the Time Table 3 Clock IP and Clock Port not is use currently 14 piscovery telecom Chapter 4 2 Time Table Open the Time Table tab to assign the SIMs to a time Assigning a SIM to work in a Port at a specific Time 1 ee OO NH uu 10 Select a port from the list of the ports in the left
28. r 6 1 Adding SIM SEMVEN sccesssrkksusnpkkvsetekk vase vba cU TETER E ERN DUIS VEDI H RI DIEN 28 Chapter 6 2 The SIM Server Settings essssssss essem nn 28 Chapter 7 USCS soiree vdd E TIED QU pUIUPIRUE I DI FTD EE EP EUM END KDE snus 30 Chapter E Uses CapapilitelS iade imaeirete ivan inae a aa IE men TNI UN MEM M 31 Chapter 8 Monitoring CANS cci usus eri ovewasusbx s FaU SVP x e vEdau RIVE US SUVIEEYIES EY PNVEE Ve QUATN NE VIR PUNMES 32 Chapter 8 1 The Port Control Window eessssse mnm nnnm 32 iscovery telecom Getting Started Discovery Telecom team is glad you have chosen to use the DTT s VoIP2ALL Gateway for your needs We will do our best to make your installation efforts as well as day to day configuration and monitoring tasks to be as pleasant as possible We wish you a smooth operation while greatly saving on your office mobile phone calls This chapter is your Map for installation configuration and monitoring tasks and includes a short explanation on each stage as well as references for more elaborated explanations drawings and examples in following chapters The fo llowing is a list of tasks which are recommended to go through It inc ludes mandatory tasks as well as optional tasks that are not required for your current needs It is advised that you will use the following menu as your check up To Do List We advise you to print this chapter and mark each stage when completed
29. r in the Add Prefix box the digits to be added at the end of the number Select in the Incoming Calls Handle the operation mode for each port Dial Tone All calls that come from this port will receive a dial tone to call any other port Blocked All calls that come from this port will be blocked The caller will hear a busy tone Destination Number All calls that come from this port will Route automatically to a number according to the Incoming Calls Destination mode 16 prscoven telecom 5 Select in the Incoming Calls Destination how to choose the destination number Fixed All calls that come from a port in a Destination Number mode will route to one fixed number according with their place in the table GSM 1 calls will route to Num1 GSM2 will route to Num2 and so on Priority All calls that come from a port in a Destination Number mode will route to Num1 if the number is busy not answering for the No Replay Timeout or doesn t exist the call will route to the next number on the list until there is a answer Cyclic The same as in Priority Except that each call will begin in the next number on the list 6 Press Save to activate all the changes Note After you finished dialing press to dial the number as it is without waiting the Last Digit Timeout Examples Dialing from the GSM to a VoIP extension To call a VoIP extension from a GSM mobile phone through the GSM port 1 with the default prefix settings
30. ser the gateway will disconnect the call and call him back 3 The user will get a dial tone to make a call Note The gateway will make a callback to the user GSM number Verify that the prefix of this number is on the prefixes table and the Remove Prefix box beside it isn t checked 32 iscovery telecom Chapter 8 Monitoring Calls fdb HetlD 42502 BcEH 58mcsn f 7 db HetlD 42501 BEEH TACE SIM ready a SiM ready The Sim indicator shows the status of the SIM see below The Net indicator shows the status of the SIM registration in the GSM network see below 3 The SIMH indicates the number of the active SIM 1 is local SIM and 2 is SIM Server SIM The number at the top left indicates the GSM reception level 5 The Net ID indicates the ID number of the GSM network The BCCH indicates the number of the Broadcast Channel The Net and Sim indicator s States e Ared indicator indicates there is no connection e A yellow indicator indicates there is a connection but no data transfer e Agreen indicator indicates transfer of data 7 Point the mouse on the blue triangle at the bottom right and click the right button A menu will appear Refresh port Get data from the ports Reset Port Reset the ports GSM port1 and GSM port2 Port Control Open the Port Control window 33 iscovery telecom The Port Control window This window controls the GSM port settings T xE
31. time in the gateway After setting all the needed SIMs press Save The calculation of the units each call took is Number of unit time of the call Bill Interval Units per Interval At the end of each call the count of the units with be updated When the count will reach zero the port will register the next SIM on the list 15 piscovery telecom Chapter 4 3 Prefixes In the basic setting a call that s comes in from one of the ports will receive a dial tone The gateway will route the call according to the prefix of the dialed number In this window we list all the ports in the ga teway and their prefixes Press the Prefixes tab to see Time T able Prefixes Local SIM Incoming Calls Handle Dial Tone Remove Prefix Add Prefix incoming Calls Destination Type Priority ki Hum 1 Hum 2 Hum 3 Hum 4 Hum 5 Hum 6 Hum 7 Hum 8 Huma Hum 10 Hun11 Hun12 Huni13 Hum 14 Hum 15 1 2 3 4 5 b F B g t 1 Hefresh SAVE 1 Enter the Prefixes for this port When a dialed number start with this prefix the call will route to this port e lf the prefix of a port is then all the calls that didn t fit the other ports prefixes will go through this port e f two or more ports have the same prefix then the gateway will rotate the calls between the ports 2 Select in the Remove Prefix box how many digits to remove from the beginning of the dialed number 3 Ente
32. y Telecom gt VoIP2ALL Management The VoIP2ALL Management application window will open 2 VoIP 2ALL System ver 4 0 Connect Yoip System Users Time Virtual SIM Debug Gateway Time IP Address Reset the device after setting the IP Sddress or the Port Port Wait for Dialing secs Last Digit Timeout secs Debug Level E Disconnected 12 iscovery telecom Connecting to the Gateway 1 Press Please enter detail for the host that you want to connect Host address 10 15 2 245 E Port number 2007 default port 2007 2 Enter in the Host Address the IP Address of the Gateway The IP Address of the gateway is written at the back of the gateway near the ESN number 3 Enter in the Port Number the port of the gateway The default port is 2007 Note You must wait 30 seconds after connecting the power to the gateway for the initialization process to end before connecting with the PC Management Note If you can t remember the IP Address see Appendix A Com Port Setting the Clock Press stem jn the toolbar Select in the Date box the date of the gateway Enter in the Time box the time of the gateway peo Ee de Select in the Date Format how to display the date Day Month Year or Year Month Day 5 Press Save to change the time and date Restarting the Gateway To restart the gateway press the Restart System button Note This will not restart the GSM p
Download Pdf Manuals
Related Search