Home

User Manual - Jeppesen Commercial Marine

1. Description Coordinates zempl coou D Font Warne Arial Black Font Size 10 T Font Type Normal Horizontal Align Center Vertical Align Center Terst Text On the Attributes and General tabs on this panel specify attributes of the new area and enter its general description respectively by analogy with those of a symbol A sector is considered an object with point geometry which is the location of its vertex So build geometry of the sector by complete analogy with that of a symbol too Editing an Existing User Object To edit a user object 1 Select its icon under the root node of the layer it belongs to and run the Edit Object dynamic menu command Figure 56 Figure 31 User Layers editing Fishery Si Overview enter ie Symbol ___ ie P Edit Be Symbol Delete E Ak Symbol ete Be Symbol The current attributes of the object get shown on the UO panel e g in the view of Figure 57 Page 38 of 56 Jeppesen is a Boeing Company A NORWEGIAN Ci Figure 32 User Laver Object Edit object Line Attibutes Description Example Colour Patten es width 1 Cancel Delete obiect Geometry Figure 57 is obviously much like Figure 49 and Figure 51 Figure 53 with the only difference for two extra buttons named Delete Object and Geometry Editing Attributes of a User Object On the UO panel enter new attribute values of a user object as
2. F JEPPESEN A BOEING COMPANY e JEPPESEN A BORING COMPANY dKart Look Free Geo Viewer Version 5 2 0 Simultaneous loading of geographical data formats S S ENC AML IENC and misc raster formats Support for OGC WMS Service View objec attnibute Set Goto_position advanced user layer function and misc 5 92 display options_dKart Cook may connect to an existing in house dKart Catalogue database Jeppesen is a Boeing Company rage RODO gt oz 90 D g2 om yo 20 A gt oz zZ Jeppesen Norway AS Address Hovlandsveien 52 PO Box 212 N 4379 Egersund Norway Internet Wwww jeppesen com marine E mail dkart je ppesen com Tel 47 51 46 47 OO Fax 47 51 46 47 O1 Copyright 2001 2012 Jeppesen All rights reserved dKart Office dKart Editor dKart Image dKart Archive dKart FODB dKart Look and dKart Publisher are trademarks of Jeppesen All other brands and product names are trademarks of their respective owners No part of this document may be copied transmitted transcribed reproduced stored in any retrieval system or translated into any language by any means without written permission from Jeppesen Document revision date 2 18 2011 9 46 00 AM Document version 5 2 Page 2 of 56 Jeppesen is a Boeing Company ES Bz Q0 D He on xo a5 oz zZ dKart Look 5 2 User s Manual Contents CRE OOK MN GENEA iiaa E ee 6 PUDO SC aa rc ce ceigcee ce Ea aE EEEE
3. sssini a a a a 15 Program 1OOID ANS csa EEA E EA E R 15 Program Reo 1 115 9 pee ee ee een eee eee 15 Building Connections to Databases of dKart Office 2 0 cece eee e eee e eee eee e eee eee eens eeeeeeeeeeeeeeees 15 ENBE OO CONES aise gece jam asin heme eecini ewe as eewenis vee nae en eeuueedeccceeseeaweue meweuencouesauneseuicenprarcususeean 17 Chart Collection Management jain 19 CHIN ONIN ES canran E NE A AA A N REETA 19 Opening Chart Folio Panel s sssunnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn ennn n nnmnnn mnnn nnn 19 Adding a Chart to the Collection scccssssssseeenseneesseeessseessseeesnseeeenseeeesseeesnsenesseenenses 20 Excluding a Chart from the Collection ccccceseeceeeeceeeeeeeeneeeeeeneeeonseseeenseeeneesenseeonseseesneesaesnees 20 Chart Display Control via Dynamic mMenu cssecssseesssseessseeeenseeenseeeenseneessenenses 20 Opening a Locally Stored Chart sccsssssssscsssssssscssssecssssecsssseesssceesseeesssseesssseessnes 21 Page 3 of 56 Jeppesen is a Boeing Company Chart Display COnU 6 ladeensitemecnianennunianwerninnnes 23 The Standard Toolbar sicrscaiecotetewecenscccctb tewescccnscrceens te escsaeteseteteveesictseaiaustetevscunstecath lecnesdoneis 23 World Map OVGIVIOW siccvcccsescecesseceensceseswcecveesaesdecesnseceecxssdessencucseseussdsoseasnsvecesssceceeaeucueusessceeeat 23 FESS CANNING A CIN AUN sessin 2
4. 13245 cof Number 12 i Scale 1 1 2 Projection fh Units of Coor H E Coordinates Jeppesen is a Boeing Company Figure 42 QUERY i Cancel Query Open as Table Export contents of Catalogue Database to File Refresh Page 45 of 56 NORWEGIAN CREDITATIOI Catalogue table 500 000 General Local datum Figure 43 Sor Print E Find Open Show Local datum 14 12 2002 31 01 2004 06 03 2004 31 01 2004 72 49 59 62 N 24 59 43 63 E 76 00 01 33 N 40 59 50 16 E 500 000 Approach Local datum Local datum 30 12 2002 31 01 2004 31 01 2004 13 12 2003 75 30 00 40 N 31 59 39 97 E 79 00 01 66 N 43 59 43 20 E 10 000 Harbour Local datum Mean sea level 24 11 2001 13 12 2003 14 12 2002 31 01 2004 60 28 39 83 N 28 08 15 06 E 60 32 51 62 N 20 4 01 07 E 200 000 200 000 Coastal Coastal Coastal Mean sea level Mean sea level Local datum Mean sea level Mean sea level Approximate 13 12 2003 01 01 1999 24 11 2001 13 12 2003 31 01 2004 24 05 2003 31 01 2004 31 01 2004 31 01 2004 65 06 00 65 N 65 06 00 65 N 67 49 01 16 N 34 05 50 60 E 34 05 50 60 E 43 57 50 33 E 66 21 00 47 N 66 21 00 47 N 69 03 01 15 N 33 09 50 15 E 386 09 50 15 E 43 36 51 44 E 200 000 Coastal Local datum Approximate 24 11 2001 14 12 2002 14 12
5. 2002 31 01 2004 68 55 31 39 N 49 05 50 36 E 70 7 01 51 N 53 49 50 20 E 200 000 Coastal Mean sea level Mean sea level 24 11 2001 14 12 2002 14 12 2002 31 01 2004 68 07 01 68 N 52 07 51 17 E 69 21 01 62 N 56 44 S1 72 E OO s o Bee wl 200 000 Coastal Local datum Approximate 24 11 2001 14 12 2002 14 12 2002 31 01 2004 68 56 3 38 N 44 46 49 90 E 70 11 01 27 N 49 26 50 40 E d u ea ee m 200 000 Coastal Local datum Lowest 29 06 2000 Nin m Beer sw Sf 13 12 2003 15 11 2003 31 01 2004 66 01 00 30 N 32 09 50 15 E 671 2 00 36 N 36 1 4 49 92 E To manually open the Catalogue Table panel run the Window gt Catalogue Table panel menu command In this table press Attributes to specify which of the table columns to show in an extra dialogue window that will then open Figure 15 Figure 44 Show columns Number Scale Projection Units of Coordinates Chart Type Navigational Purpose w Mame w Mame in National Language w Region Region in ational Language Agency Code Secret W Harirantal andati Dati r Cancel Select all Deselect all Sort to sort entries by the attribute in the selected column scale navigational purpose etc Print to print out the t
6. 25 The Description tab on the ULO panel User Layer Object Input object Symbol Attributes Description Hame English Information M ational Information Dangereous w Building Geometry of the New Symbol 1 Left click at the location of the new symbol on the chart 2 Click again and again if several identical symbols are going to be created See the coordinates of the clicks have appeared on the Geo editor panel in the form of a table Figure 27 Page 35 of 56 Jeppesen is a Boeing Company 3 After the last symbol is built right click Creation of a New Sector After you press the ULE toolbar button the UO panel takes the view of Figure 51 Figure 26 Input Object Sector Attributes Description Coordinates a coou M Yvicdth Radius Mm 120 000 a rm o dj dje a F Anglet Angle m o dj canca On the Attributes and General tabs on this panel specify attributes of the new sector and enter its general description respectively by analogy with those of a sector A sector is considered an object with point geometry which is the location of its vertex Other geometry features of a sector e g angular characteristics are defined as scalar attributes So build geometry of the sector by complete analogy with that of a symbol Creation of a New Line After you press the ULE toolbar button the UO panel takes the view of Figure 52 Figure 27 Input Object Line
7. Attributes Description Coordinates Example Colour a r Pattern Ear Vvidth coc Page 36 of 56 Jeppesen is a Boeing Company A NORWEGIAN On the Attributes and General tabs on this panel specify attributes of the new line and enter its general description respectively by analogy with those of a sector Building Geometry of a New Line 1 Go on along the line clicking at its vertices see the coordinates of the vertices appearing on the Geo editor panel in the form of a table 2 Having reached the end of the line right click Creation of a New Area After you press the ULE toolbar button the UO panel takes the view of Figure 53 Figure 28 Input Object Area Attributes Description Coordinates Bqr Colour Pattern P EE i On the Attributes and General tabs on this panel specify attributes of the new area and enter its general description respectively by analogy with those of a sector Building Geometry of a New Area 1 Go along the border of the area clicking at its vertices In the process of drawing the program automatically keeps the border contour permanently closed Figure 54 Figure 29 Baltic Sea 2 Having reached the last vertex right click Page 37 of 56 Jeppesen is a Boeing Company Creation of a Text After you press the ULE toolbar button the UO panel takes the view of Figure 55 Figure 30 Input Object Text Attributes
8. QUETy Re SUIS sicscsccccncacasastecannccnntscodencnsaaesonsanssasiecsansausadtennesendeteosannneccasenanecmentacanenenadas 53 Geo Queries to the CataloQue ccccccesceceseeeeseeeeeeeeeeeeeneeseeseseeeneeeenseeonsescesaseesneeeesneeesnseeensanons 54 The Geo Query Toolbar sreci inorridire enana nan aTe eraa PaVa KAEO PE TUNNEN A EErEE iiaiai 54 Coordinate Table 0f GG0 Que ly sesia Eni E aA a aE Eaa aa EEEa Ea 54 Running a Point Based Ge O QUETY cc sssscccceceseeeeeeeessseseeeseeeeeeeeeeeeeeeeessseeeeesensaeeeeeeeeeeeeesssssesseeesneaenes 55 Running a OULe BaSed QUERY enaissi iei eE E E E 55 Rectangular Area Based QueT ccccccesssseceeeeeeeeeeeeeseseeeeeeeeaeeeeeeeeeeeeeeesscsceeseneaeeeeeeeeeeeeesessssesseeseseaaees 56 ID ba sed Search for an Entry in the Catalogue ccccescccesceeeeeeeeeeeseeeeeeseseeenseeensesonsesoeseeeesnees 56 Page 5 of 56 Jeppesen is a Boeing Company Jeppesen is a Boeing Company dKLook in General Purpose The purpose of dKLook software is to combine on one screen the following information Chart from in the local folio e Databases of dKart Office Information from the OGC Servers within a pre defined area Installation of the Program The section below describes how to install and run dKLook System Requirements dKLook runs on a Microsoft Windows operating system Before you install the software make sure your equipment meets the following requirements Micro
9. from the drop list in the Position name field Page 28 of 56 Jeppesen is a Boeing Company 2 Press Set The bookmark will then be found and shown at the scale value set in the Scale field see step 4 in Setting a Bookmark on the Chart on page 28 Info on Objects on Charts of the Collection The Found List Tool To open the Found List panel run the Window gt Found List menu command Right click at a point on a chart or go around an area in the Chart View with the Shift button pressed not pressed depending on the registry key value on the keyboard the list appears of objects on the charts in the Collection located in a close vicinity of the point of the click or within the area and their attributes on the Found List panel Figure 43 Figure 18 The Found List panel OWEMSKa PRONTI OAL F LW teat ote BF le aS DLE WEs3Om9M 3 44 Ninama EA 6 AO peo A NES ba Hl F N m h Or ee A T a A x ats 29 30 1 h nia cA Si ae mS AY BRIN ASS lt bri H preRGnokulals SF 2 WT 0Ssi02r JI 28 as bnsSerultatboune Mole Attribute Value Value of depth contour 20 0 Depth area Scale minimum 4000000 Coverage Navigational system of marks Quality of data Depth area Sea area named water area Highlighting of an object in the list makes the object itself highlighted on the chart Editing System Registry To configure the program to open the Found List with or
10. open the second page of the custom query wizard Figure 22 etc Viewing Query Results The results of a query are shown on the Catalogue panel in the view of Figure 26 Figure 55 60 Zimbabwe Surveyor General Government of Zimbabwe GR Greece Hellenic Navy Hydrographic Service RU Russian Federation Head Department of Navigation amp Oceanography J Paper Charts query 1 o 10063 J ENC Cells H E Books Successful AY SE Sweden Sjofartsverket 54 query indicator ministration UA Ukraine State Hydrograp Unknown us USA Office of Coast Survey National Ocean Service NOAA ZR Pan American Institute of Geography and History xx DEF Open ECDIS Forum 4 Russian Federation Morintech Ltd E E ENC Cells Note that the program will automatically expand only those sub catalogue root nodes in which the query has returned non zero results and mark them with a query indicator as shown in Figure 26 For instance this figure illustrates that the latest query has returned the only paper chart entry in a Russian catalogue Study the results of a query in the same way as the entire catalogue see The Catalogue Tree on page 44 and subsequent sections Jeppesen is a Boeing Company Page 53 of 56 ats Q Geo Queries to the Catalogue Functionalities are provided to run a query to the Catalogue for entries in it overlapping at least partly a pre defined fi
11. program Functionalities are provided on the Chart Folio panel for chart collection management and display control A chart once added to the Collection stays in it during all later program sessions until the user explicitly excludes it Chart Formats The list of data formats available for browsing using dKLook includes Encrypted Unencrypted dKart Charts dcf S 57 edition 3 x 000 o S 57 AML 1 0 and 2 1 o Inland ENC 1 2 DAF dKart Raster _ bp pX GeoT IFF tif tiff Chart Catalogues 030 031 OZI Explorer map GeoJPEG Charts Catalogue 030 031 Multi level charts mlc Opening Chart Folio Panel To open the Chart Folio panel in the view of Figure 35 run the Window gt Chart Folio menu command Chart Folia Figure 10 The Chart Folio panel Add Charts Del Charts Last Update 20100 2000000 Russian Federation 01 12 2000 1 15 02 2005 7 GBS401 Sw 25 000 Uk Jeppesen is a Boeing Company 05 03 1998 1 Page 19 of 56 NORWEGIAN ACCREDITATION Adding a Chart to the Collection A chart automatically gets added to the Collection at opening it with dKLook To open a new chart 1 Press the button on the Standard toolbar or run the File gt Load chart menu command the standard Open window opens 2 In this window specify the full chart file name and press the Open button The icon of the new chart appears in the list of charts on the Chart Folio panel and the ch
12. table gets filled with coordinates of the waypoints of the route 7 Complete the query routine and run the query Jeppesen is a Boeing Company Page 55 of 56 abs Rectangular Area Based Query 1 T Press the button on the Geo query toolbar or run the Tools gt Geo query gt Insert area to geo editor menu command Click at a corner of the rectangle on the chart Click at the opposite corner See coordinates of the corners have appeared in the coordinate table on the Geo Query panel in the view of Figure 27 Press to confirm the configuration on the chart or x to erase it Follow the query making routine until you reach the second page of the coordinate based query wizard Figure 23 On this page switch on the From chart option the coordinate table gets filled with coordinates of the corners of the rectangle Complete the query routine and run the query ID based Search for an Entry in the Catalogue You can find and view an entry in the Catalogue without making a query if you know its ID 1 Press Find on the Catalogue Table panel Figure 14 the Find Record window opens Figure 29 Figure 58 The Find record window x Catalogue Data Base RU Russian Federation Head Departmer Type of record Humber I Show all fl 1989 er 174 1989 e 1062 1984 Select 1063 1989 1078 1989 1078 4 1985 TESTE TEE Close 2 Type the entry ID in the Number field the list below will automa
13. the ULE toolbar produce effects described in Table 11 Table 8 Buttons on the ULE toolbar 7 ee Creates a new layer Renames an existing layer Deletes an existing layer Imports a user layer from an external file Exports a user layer data to an external file Exports all existing layers each to its own file Enters geometry editing mode Creates a point user object lal meee EF Creates a linear user object Creates an area user object Page 30 of 56 Jeppesen is a Boeing Company NORWEGIAN EE Moves a vertex symbol or sector o a new vertex between existing ones for lines and Make a broken line closed i e make contour and start entering another one Undo last operation Redo last operation ix Exits ULE To show hide the ULE toolbar run the View gt Toolbars gt User Layer menu command The User Layer Panel On the User Layer panel the user views the list of existing layers and gets access to layer management functionalities of the program via the dynamic menu commands as shown in Figure 44 Figure 19 The User Layer panel User Layers editing Custom E fut Custom s Hide Layer Overview Layer Center Layer Start Editing Delete Layer Rename Layer Export Layer Mew Layer Import Layer Export All Layers Under the root node of a layer e g Fishery the list of all its objects stand Figure 53 To open the UL panel run the Window gt User Layers Panel menu com
14. the UserLayer sub folder in the program folder Creating a New Object of a Layer Setting the Active Status of a Layer The active status of a layer means that it is the only one that can be edited at the moment which includes adding new object to it and modifying and deleting existing ones To set this status double click the icon of the layer on the UL panel See the layer name has got typed in bold Table 12 and a prompt has appeared on the title bar of the panel saying what layer is being edited Entering the Add Object Mode To enter the Add Object mode press one of the buttons in Table 11 according to the metrics type of the object you re going to create Page 34 of 56 Jeppesen is a Boeing Company Creation of a New Symbol Defining Attributes of the Symbol After you press the a ULE toolbar button the UO panel takes the view of Figure 49 Figure 24 The Attnbutestab on the ULO panel User Layer Object Input object Symbol Attributes Description Example Colour a Onentation O 0 Font Size 20 1 On the Attributes tab on this panel Figure 49 specify attributes of the new symbol To do SO 1 1 Select a patter from the list in the lower part of the window 1 2 Specify symbol color orientation and font size in the fields of the same names 1 3 See the preview of the symbol in the Example box 2 On the Description tab enter general description of the new symbol Figure
15. the main window of the program using the drag and drop technique To return to the default view of a toolbar menu press the Reset All button on the Toolbars tab To delete a non default toolbar highlight it in the list of toolbars and press the Delete button Graphic Interface Style Graphic interface elements can be styled in one of the MS design styles To do so run the View gt Application look menu command and select the style from the sub menu that will then open Page 13 of 56 Jeppesen is a Boeing Company Complete Command and Tool Reference see the complete list of the main menu commands and tools brief explanation of effects of each and references to more detailed descriptions in the tables in this section below File Table 2 The File menu Load chart Loads a locally stored chart into the Chart Opening a Locally Stored Chart View on page 21 Page Set up Prints out a fragment of a chart Information Output to a Printer on page 29 Exits the program Starting Exiting on page 7 Print preview Table 3 The View menu Reference Overviews the World map World Map Overview on page 23 Zooms in on an area on the chart Zooms out on an area on the chart Rescaling a chart on page 23 Sets a user defined chart presentation scale Toolbars gt Shows Hides toolbars in the main window of Showing Hiding Panels and the program Toolbars on page 11 Shows Hides the
16. window Page 33 of 56 Jeppesen is a Boeing Company Import Export of Layers Layer exchange is possible between different machines if the users provide access to layer data to each other At export of a layer layer data are exported to an external file with a ule extension on the HDD and then transferred onto the other machine on a media of this or that kind However in the course of the export routine layer data are protected from unauthorized access by means of a password The authorized user on the other machine can read the layer data provided he knows the password To export a layer 1 Select the layer icon on the UL panel and run the Export Layer dynamic menu command Figure 44 or double click the layer icon and press the button on the ULE toolbar the standard Save as window opens 2 In this window navigate to the required directory on the HDD and press Save the Define Password window opens Figure 23 The Define Password window Define a password x 3 Enter a password in this window or press cancel to set a password free access to the layer file To import a layer 1 Press the button on the ULE toolbar the standard Open window opens 2 In this window navigate to the layer file on the HDD and press Open the window of Figure 48 opens for entering the password if any 3 Enter the password in this window and press OK The layer will then be imported into the program and saved to
17. without the Shift key pressed set the following registry key value HKEY CURRENT USER gt Software gt HydroSERVICE gt dKLook 5 2 gt Plugins gt FoundListPanel gt Usersfit 0 or 1 Information Output to a Printer There is a program function to print out the main window of the program in its current view To do so 1 Run the File gt Page set up menu command and set the required settings as to page orientation margin width etc in a Page Set up window that will then open 2 Run the File gt Print menu command the standard Print window opens 3 Set the required print settings in this window and print Page 29 of 56 Jeppesen is a Boeing Company User Layer Editor Purpose dKart Look user can create his own objects to be shown on electronic charts These can be textual comments unconventional areas etc Objects of this kind are grouped and stored in dedicated files or layers When an electronic chart is on display the program also reads user layer files to display objects in them too located within the chart area User s objects layers can be created edited and deleted using the dedicated program module namely the User s Layer Editor ULE Use layer files reside in the UserLayer sub folder in the program folder with an extension of ule User s Interface of ULE Functionalities are provided on the ULE toolbar and panels for work with user s objects ULE Toolbar Buttons on
18. 3 The Pan Drag Chart Modes csssscsssssssssecssseeessseessseeeessseeenseeeensoeeensoeesssenesseenensanens 24 Adjusting Chart Presentation cccscccsssssccssssssssssesssseesssseenessseeesenseeesenseeeesnseenesneeesessaes 24 Showing Hiding Chart Layers ciccccscscniccieccncensroesescsivessosaiemscsaieneneaniencwoeneveancaeswanucenseDoceniwncnreneweuns 25 Presentation of Extra Chart El MentS ccccccceceeeeeeeeeeeceeeeeeeeeeeeceenseseeoesnsnensoeensnseseeanensnsees 25 Services for Browsing Chafts jini 27 Measurements on the Chart s sssunnsnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nunne nnmnnn mnnn nnn 27 RUNNIN INE ERBL LOOL noa 27 Measuring Distance and Bearing sssssnsnnunnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nnnm nnmnnn 27 Measuring Route LengtM sssnissn ERER EE 27 Using the Geo Position TOOl sssnssunnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nnmnnn nnna 28 Setting a Bookmark on the Chart sis vecssvetcnssssescectsceesemcesetscunasteetisvencnensvetewcnewreesensswisnvesktenseseess 28 Finding a Bookmark on the Chaft cccsccccseceeeeeeeeeeeeeeeeeeeeeeeeeeeeoeseseeenseeenseeensesenseseesaseeeesaees 28 Info on Objects on Charts of the Collection The Found List Tool 29 Edi ng System RE OISUY sccccsctenissccsrncnewscancdccssbsncantencdensaneceaecasnenanscnsessateresaanstsadieeeskeneseseada
19. 6 Installation of the Program sssssnnneennnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nnmnnn kevin 6 SY SOM Reg h mN Sesin E Aaea 6 BENS CAPE CIO OM sr S E E E E 6 Koranon ROUE r E E E E aversetsawecmtueoueas 6 Windows 7 and Windows Vista US GIS en occu cates esealvcaccnbverescecisvcesdencsn west naseosedileseneuveetdcassalnrgerneesteedeveeeuter veer 6 CPF Stel WIN COICO i ioe sete etoe soa E A E A E E E T 7 Starting Exiting CO ie sso setters eas Sec ccs ota eewten gee aatoencseeccndvnceccstvevencecws sedouasuewoinesvsecuatweneataieesecs 7 USErS INI ICO ee nnn ee are 9 Mam VV APUCEOWY TAY OUD seess enaa EE EEEE Ea EEEE EET 9 Main Window Customization s ssassssnnnunnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nnnm 11 Show ing Hiding Panels and Toolbars sscivcissieriveiestasccccstentvedenterseesuessecetoecenduevesvendeedantvseadessendvedanierdaenueauveuss 11 Pie COC Ea A e e N A T E E E S E E ET 11 Customizing Default Menus and Toolbars ccccsscccecceeeeeeeeesseseeceaeeeeeeeeeeeeessesseeeeeeneeeeeeeeeeeeeseeeseeeseegs 12 Creating Users TOODA ecoin EE a yn tesa eeariede 13 Graphic Meria e Sye a aE EEE 13 Complete Command and Tool Reference ussssssunseuneeunnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nnmnnn 14 BN EE ete A EE E EN EEE E E A E E E E A A E E A EE E EEE A E 14 VITO oia E vawaemenuuaecwomanateswatseoguanesce 14 MOS ogee E S A T E E E E E E 14 TMe WiINOGOW MEDU
20. EEEE OEE ER 39 Deleting re Mk 816 saa gt gly Conon Cet rt Rann et etree nore er te mre mete Tory Rare ae era ree eon eee ee cman ne 39 Adding an Extra Vertex onto a Line Area BOrer cccccccccccccceccceeecceeeeeeeeeeeceeeceneceeeseeeeceeeeeeseeseeeseesensenaesnas 40 Moving an Object aS a WhOlE ccceccceesenseceeeeeeeeeeeeeeseccseeeeeaaeeeeeeeeeeeeeesseeeseeenseeeeeeeeeeeeessessseeeeeensaaaees 40 Deleting an Existing Object eine ene ne cee eee Sen een ees ens ete ae eens Se aee aeons as 40 Viewing OGC Server Information c eeseeeeeeeeeeeeseeeeeeeeeeeeeeeeeeennesnnnenee 41 Tools for Viewing Information from an OGC Servel csssecssseessseressseesseessseeesneness 41 Registering a New OGC Server cssssccsssecessseeessseeessseesnseeeenseeeenseeesnsoeeensenesnseeesnsenenseass 41 Viewing the List of OGC Server Layers s cssssssseessseesssseesnsseesnseeenseeeeneeneessenenses 42 Display of Information from a OGC Server within a Pre defined Area 43 Switching On the OGC Information Overview c ccsssscsssesssssessssessseeessseeesssenenses 43 Viewing Catalogue ssssnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nnna 44 The Catalogue Tree snsnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn ennn mnnn nnnm mnnn mnanaa 44 Presentation of the Catalogue in the Chart View s sccssssssssssssesssseeesssenenssees 44 Viewing the Catal
21. Enable measuring tool gt Measuring tool menu command Figure 16 The Measurements panel Measurements OnO Cel Last Del All To show the Enable measuring tool toolbar run the View gt Toolbars gt Enable measuring tool menu command Measuring Distance and Bearing 1 Switch on the B D radio box 2 Click over the first point with left mouse button The marker stays on the chart Marker color can be customized as described in ERBL Tool Colors on page 17 4 Move the cursor towards the other point see the cursor permanently connected to the maker with the bearing line during the motion and the circle drawn automatically representing all points of the chart equally distant from the marker 9 Place the cursor exactly over the other point and read the distance from the marker in the D field and the bearing in the B field Measuring Route Length 1 Switch on the Sum radio box 2 Place the cursor onto the beginning of the route and click left mouse button The marker stays at the position of the click 3 Move cursor to the next waypoint of the route and click again Another marker stays there and a leg is built connected these points Leg color can be customized as described in ERBL Tool Colors on page 17 4 Continue in the same way at all other waypoints Page 27 of 56 Jeppesen is a Boeing Company 5 Once reaching the opposite end of the line route read its overall length in the Sum field Pre
22. Jeppesen is a Boeing Company User s Interface Main Window Layout The main window of the program with its major features is shown in Figure 1 Figure 1 Main window layout 18 x Be e3H 8 BB OGC Server La 7 2 X File view Tools Window Help 1 FS 0 4 Bi ml Q Q OLDE notre MEEZIT moocafspash ooeneyx DGC Servers AX ap OE Aia a R Southampton I Davis stait pimak siaii Select all Deselect a pe Emen Gei Gulf of Bothnia Faroes T eee Labrador ig Gult efikinland 3 Sea Hebrides 5 Kattzagt Gotland La ero 5 Yekaterinburg Seow Geinin al P Ireland i Calgary t sun cea Pe fondon SEUROPE Aa met UIT o Paris NORTH ceo tea Briton tre 2 AMERICA Chileago San Francisco 3 pivashington B C Azores Is L i Los Angeles f g Str of hA R mee re L Bermudas Is Gul ot 4 Sear ah Canary ls A Cai 1 o hina Arabia Peninsula Taine pon eae Deuba ks aiti Red Bea EEFE a se hE i Nouakchott Arabi ae Hainan caribbean Sea CMerde ls AEREE i 7 i o a Call fad Sea E I eh San doser EarIcas 1 u i at ahs sna Ul a upa a hontovia TA Bogota LOD Str of hal i TAS z z ult aft Guinea a KAU ERE j akpa DUH oes ee FLOM Fernanda Is i Philippines malt Pt Celebes Tanimbauls 20 Chagos Luanda Archipelaga Comori lz St Helena l m Lusaka 4 tiadagascar I er Rio d
23. L Server Server Mame tstsql Database Catalogue User Fassword pod 1 Set the SQL Server option for the database in the list in the Database type field more fields appear in this window for entering the SQL Server and Archive database names login and password 2 Enter these into relevant fields in this window and press Connect Page 16 of 56 Jeppesen is a Boeing Company ERBL Tool Colors The program offers the Electronic Ruler and Bearing Line ERBL tool for measurements on the chart The operator uses it to build auxiliary points and lines on the chart to measure lengths distances angles etc as described in Measurements on the Chart on page 27 Colors and widths of these points markers and lines can be customized by the user on the Measurements tab in the Options window Figure 9 Figure 9 The Measurements tab in the Options w indow ee x Presentation Catalogue presentation Line Width St Chart s Layers Color Marker width a Units Meters Great Circle I Rhumb Line Jeppesen is a Boeing Company Measurements DB Connections Draw on chart PHMEHHTE CnpasKa Specify marker and ruler line colors and widths in the respective fields on this tab Page 17 of 56 NORWEGIAN Chart Collection Management dKLook user can compile the Collection of charts chart folio which are permanenily on display in the main window of the
24. OGC Servers w indow Registered OGC Servers Page 41 of 56 Jeppesen is a Boeing Company Jeppesen is a Boeing Company 2 Press New in his window and enter the OGC server address into the URL text box in the next window that will then open Figure 32 Figure 36 The Add New Server window Add new Server URL 3 Press OK in this window to see the new OGC server registered n the panel of the same name as shown in Figure 33 Server ype WMS Figure 37 W APL Global Imagery Service Select action WMS Server maintained by JPL worldwide satellite imagery Click here to display the list of OGC server data layers 4 switch on the check box at the left of the server name as shown in Figure 33 Viewing the List of OGC Server Layers 1 Click the OGC server name on the OGC Server panel as shown in Figure 33 to open the list of its data layers on the OGC Layers panel as shown in Figure 34 Page 42 of 56 Figure 38 QoL Server Layers Select all Deselect all WMS Global Mosaic pan sharpened Release 2 of the WMS Global Mosaic a seamless mosaic of Landsat scenes Spatial resolution is 0 5 second for the pan band 1 second for the visu No legend default Pseudo color WMS Global Mosaic not pan sharpened Style Release 2 of the WMS Global Mosaic a seamless mosaic of Landsat scenes Farioca ee U Spatial resolution is 0 5 second for the pan band 1 second f
25. ORWEGIAN Main Window Customization Showing Hiding Panels and Toolbars Run one of the menu commands to show hide a main or a panel toolbar in the main window of the program according to Table 1 Table 1 Showing Hiding panels and toolbars Window gt Shows Hides the Catalogue panel holding The Catalogue Tree on page 44 Catalogue Read the entire contents of the Catalogue in the only form of a tree Window gt Shows Hides the Catalogue Record panel Viewing an Entry in the Catalogue in the Catalogue record holding an entry in the Catalogue ina Table on page 47 Read only tabular form Window gt Chart Shows Hides the Chart Folio panel on Opening Chart Folio Panel on page 19 Folio which functionalities are provided for chart folio management Window gt Found Shows Hides the Found List panel holding Info on Objects on Charts of the List the list of objects under the cursor Collection The Found List Tool on page 29 Window gt Geo Shows Hides the coordinate table in a editor table geo query mode Window gt Shows Hides the Measurements panel Measurements on the Chart on page 27 Measuring tool Window gt OGC Opens Hides the OGC Server Layers panel Sever layers Viewing OGC Server Information on Running a Point Based Geo Query on page 54 Window OGC Opens Hides the OGC Server panel page 41 Servers Window gt System Shows Hides the system message panel In this sec
26. able e Find to run the ID based search for an entry in the Catalogue as described in ID based Search for an Entry in the Catalogue on page 56 Open to open the selected entry in the form of a table Figure 16 Show to automatically locate and overview the selected entry on the chart Figure 16 Viewing an Entry in the Catalogue Viewing an Entry in the Catalogue on the Chart On expanding e g the ENC Cells root node in the tree all ENC frames appear on the chart Figure 16 Select an ENC entry in the tree to make its frame color shaded on the chart Figure 16 Page 46 of 56 Jeppesen is a Boeing Company NORWEGIAN CREDITATIOI Figure 45 Catalogue entry on the chart and as atable 14023 Fa Catalogue 2 4 2x Russian Federation Morintech Ltd H E ENC Cells all 362 11117 11118 1132 cy 12008 4 cy 12008 E2011 cy 12013 Catalogue record z Russian Federation Morintech ENC Cells Description Coordinates Source references Repott Viewing the Related Chart in the Archive lf an entry in the Catalogue describes a chart in the Archive there is a function to load the chart itself into the program and show it on the Chart panel To do so run the Load from Archive dynamic menu command Figure 11 Viewing an Entry in the Catalogue in the Table To view an entry in the Catalogue in the form of a table run the Ope
27. art gets shown on the Charts panel Excluding a Chart from the Collection To exclude a chart from the Collection select its icon on the Chart Folio panel and press the Del Charts button on this panel Figure 36 Figure 11 Chart Folio Add Charts Del Charts aaan ne a anes Unload selection Unload all Overview boundis Overview chart Original scale Chart Display Control via Dynamic menu Use commands in the dynamic menu of the icon of a chart on the Chart List panel to adjust display of Chart in this or that way as described in Figure 37 Page 20 of 56 Jeppesen is a Boeing Company Figure 12 Chart display control using dynamic menu command hart Folio Add Charts Del Charts Agency Dictic Federation 5 57 Insert chartis Unload selection Unload all Overview boundis Overview chart Original scale Table 6 Chart display control using dynamic menu command Insert charts O Displays a new chart under the current one Unload selection Hides the selected charts Opening a Locally Stored Chart To open a chart stored locally yet not including it into the collection run the File gt Load chart menu command Page 21 of 56 Jeppesen is a Boeing Company Chart Display Control Use buttons on the Standard tooloar and menu commands to control chart display according to Table 9 The Standard Toolbar Table 7 The Standard toolbar Decrease the presentati
28. described in Defining Attributes of the Symbol on page 35 Editing Geometry of a User Object Press the Geometry button on the UO panel Figure 57 Another technique to enter the geometry editing mode is to left click on the object with the button pressed on the Geo Editor toolbar The object to be edited gets surrounded with a frame on the chart Figure 58 Moving a Node Vertex 1 Point the cursor onto the node vertex to move and left click 2 Move the cursor to the new position of the node vertex and click again 3 Press OK on the UO panel Figure 57 You can also enter the new coordinate values numerically directly into the coordinate table on the Geo editor panel To undo redo an action on the chart use the Undo and Redo buttons as usual Deleting a Node Vertex 1 Point the cursor onto the node vertex to delete and right click 2 Press OK on the UO panel Figure 57 To undo redo an action on the chart use the Undo and Redo buttons as usual Page 39 of 56 Jeppesen is a Boeing Company Adding an Extra Vertex onto a Line Area Border 1 Point the cursor onto the leg of the line onto which the extra vertex is going to be added and left click The cursor gets bound to the vertices of the leg with a rubber string Figure 58 Figure 33 User Layer Object Edit object Line Attributes Description Example Eel e Y r Pattern P width OF Cancel Delete object 2 Mo
29. display a chart at the compilation scale run the Original scale command in the dynamic menu of Error Reference source not found The Pan Drag Chart Modes With the toolbar button pressed click at a point on the chart to see the point of the click in the center of the Chart panel With the toolbar button pressed drag the cursor over the chart with left hand mouse button pressed to see the chart continuously following the cursor Adjusting Chart Presentation To adjust presentation of a chart according to S 52 requirements run the Tools gt Settings menu command to open the Options window and set necessary settings on the Presentation tab in this window Figure 38 Jeppesen is a Boeing Company Figure 13 The Presentation tab in the Settings w indow Settings e xi Catalogue presentation Measurements Draw on chart Presentation Chart s Layers DE Connections Symbols size sounding Symbol m Test J1 Like paper chart Highlight obstructions W Center symbols Depth contours Shallow pattern r EOE Shallow 2 00 itiona M Magnification a 30 00 I Lights visibility range Deep 30 00 F Quality symbols 2shades scheme Overscale indication Safety contour only Coverage M Show safe depths Plain depth contour IY Show safety countour I Important text W Lights description text Color scheme i Other text Defaut National text Screen size External presentations Height 207 mm R
30. e Janeiro i Europa l 9 Lima AMERICA Cocos llands Brasilia Paskhi l Scape Town Tristan da Cunha Is St Faul l Crozet ls 5 Buenos Aires Juan Femandas ls Found list A X Chart folio M 4 H Catalog objects Chart objects Add Charts Del Charts Attribut Val a e D D eo For Help press F1 Disconnected 15 S1 S5 61 N 82 04 S6 55 14 05 CAF NUM SCEL The key elements of the window are 9 The main menu 1 the Standard 2 and other 3 4 toolbars In the menu and on the toolbars the user gets access to the most frequently used functionalities of the program e The Charts panel 5 Various charts are shown on this panel which is the key function of the program The Chart Folio panel 6 On this panel the user gets access to the electronic chart collection management and chart display control functionalities o The Found List panel 7 On this panel descriptions are shown of objects located under the cursor right click on the chart Page 9 of 56 Jeppesen is a Boeing Company A Q The OGC Server 8 and OGC Server Layers 9 panels On these panels functionalities are provided to control display of information received from thr OGC servers Much more panels and toolbars can be shown or hidden in the main window of the program as described in Main Window Customization on page 11 Page 10 of 56 Jeppesen is a Boeing Company A N
31. e electronic ruler colors ERBL Tool Colors on page 17 Shows Hides extra elements in the Chart View Presentation of Extra Chart Elements on page 25 Building Connections to Databases of dKart Office dKart Look 5 2 may be setup to connect to existing dKart catalogue and dKart Archive databases DB Connections Functionalities for building connections to Building Connections to Databases of databases of dKart Office dKart Office on page 15 This will allow for digital catalogue integrated in the viewing experience as well as with an dKart Archive connection active the operator may load the chart data by selecting proper chart record from the catalogue view dKart Look do NOT come with any database setup tools Build connection to the databases of dKart Office on the DB Connections tab in the program setting window which opens by running the Tools gt Settings menu command Figure 7 Page 15 of 56 Jeppesen is a Boeing Company Figure 7 The DB Connectionstab in the program settings window Catalogue presentation Measurements Draw on chart Presentation Chart s Layers DE Connections Registered database connections L Catalogue Not conp Click hereto open the database connection window Swtch onthe check box here TrenHa fipumenire Lnpabea 1 Click as shown in Figure 7 to open the database connection window Figure 8 Figure 8 The Connect to w indow Catalogue x Database type SO
32. e lower levels of the tree as shown in Figure 11 Figure 40 Catalogue Read Only KM Comoros Comoros ES Paper Charts all 1 Delete From Query Load From Archive Export contents of Catalogue Database to File Refresh Approach Presentation of the Catalogue in the Chart View 1 Set the settings related to presentation of chart frames in the Chart View on the Catalogue Presentation tab in the program settings window Figure 12 Jeppesen is a Boeing Company Page 44 of 56 ats Figure 41 The Catalogue presentation tab Presentation Chart s Layers DE Connections Catalogue presentation Draw on chart Measurements General Draw method Using borders Catalogue charts frames Type Paper charts od Default Navigational purpose Undefined z Width Coia en e a Color by OTMeHa jipumenie Cnopasra 2 select the Using borders or Using coverage option from the Draw method list 3 select other chart frames drawing options in the Catalogue charts frame options group Viewing the Catalogue in a Tabular Form All entries of a type in the Catalogue e g ENC cell or paper chart entries etc can be viewed in the form of a table To do so run the Open as Table dynamic menu command Figure 13 the table of the view of Figure 14 automatically opens on the Catalogue Table panel holding all entries of the type Catalogue Read Only Ae Paper Charts all 1 Ely
33. eload OTMeHa fibers Cnopasna Page 24 of 56 NORWEGIAN CCREDITATIOI Showing Hiding Chart Layers Features on a chart can be grouped into layers e g bathymetric data natural cultural features etc switch on off layers to show hide on a chart on the Chart Layers tab in the program settings window Figure 39 Figure 14 The Chart Layers tab in the program settings window X Draw on chart DEB Connections w Soundings Select All w Matural objects wf Obstructions Deselect All v Navigational aids Special Areas Iiv Mooring structures Iv Constructions WlHydraulic Structures iw Recommended routes W Tidal data WlMetaobjects WlUnknoown objects Wl arkographic objects Coverage quality Odditional info OTMeHa pomene CnpaBka Presentation of Extra Chart Elements switch on off check boxes on the Draw on chart tab in the program settings window to show hide extra chart display elements all names are self explanatory Figure 40 Page 25 of 56 Jeppesen is a Boeing Company Jeppesen is a Boeing Company Figure 15 The Draw on chart tab PHMERETE Page 26 of 56 Services for Browsing Charts Measurements on the Chart Running the ERBL Tool Run the Window gt Measuring tool menu command to show the Measurements panel in the main window of the program Figure 41 or press the button on the Enable measuring tool toolbar or run the Tools gt
34. ery dynamic menu command as shown in Figure 19 left part Figure 48 S XX DEF Open ECDIS Forum A Database 4 Russian Federation Morintech Lid Query Cancel Query Properties Refresh tree 3 In the Record Type field select the type of the entries you re going to query for e g ENC Cells Setting Search Criterion 1 In the Filter field on the first page of the query wizard Figure 17 select a search criterion from the list e g By Scale Figure 20 Jeppesen is a Boeing Company Page 48 of 56 ats Q Figure 49 Database A Russian Federation Morintech Ltd Record Type ENC Cells Other options in this list are Table 6 Table 11 Search options Scale Based Query on page 49 By Coordinates Coordinate Based Query on page 50 Custom Custom Query on page 50 2 Press Next on the first page of the query wizard Figure 17 Scale Based Query On the second page of a scaled based query wizard Figure 21 Figure 50 The scale based query wizard page 2 f By Scale Range From ka Include 1 Switch on the By Scale Range or By Scale Equal to radio box to query for entries with a scale within a predefined range or an exact value respectively 2 With the By Scale Range option switched on press release Include buttons to include or not include range limits into the search results 3 Press Next on the second page of the query wizard Jepp
35. esen is a Boeing Company Page 49 of 56 abs Tat NORWEGIAN ACCREDITATION Custom Query A custom query means a query based on queried entry attributes e g chart datum navigational purpose etc On the second page of a custom query wizard 1 On the Attributes tab specify attributes of the queried entries Figure 51 Attributes Source references Add Delete a w i Cancel Help 2 Repeat the same routine on the Source Reference tab to specify attributes of the parent chart 3 Press Next on the second page of the query wizard Coordinate Based Query A coordinate based query to the catalogue returns entries in it overlapping at least partly a pre defined figure which the user draws manually on the chart This can be a set of isolated points a broken line a route or an area On the second page of a coordinate based query wizard Figure 23 Figure 52 The coordinate based query wizard page 2 Define Coordinates Erom chart On Point Add Insert elete O e e O 1 In the drop list at the left select Jeppesen is a Boeing Company Page 50 of 56 ats Q On Point to treat coordinates you re going to enter as those of isolated points On Area to treat coordinates you re going to enter as those of vertices of an area On Route the same for a route broken line Press Add to open the first line in the coordinate table Enter coordinates of a point area route into this li
36. gure which the user draws manually on the chart This can be a set of isolated points a broken line a route or an area The Geo Query Toolbar Use buttons on the Geo query toolbar to enter one of the drawing modes according to Table 7 Table 12 The Geo query toolbar Tools gt Geo query Enters point drawing Running a Point Based Geo manager gt Insert points mode Query on page 54 to geo editor Tools gt Geo query Enters arbitrary region manager gt Insert region drawing mode to geo editor Tools gt Geo query Enters circle drawing manager gt Insert circles mode to geo editor Tools gt Geo query Enters rectangle drawing Rectangular Area Based manager gt Insert areas to mode Query on page 56 geo editor Tools gt Geo query Enters broken line drawing Running a Route Based manager gt Add line to mode Query on page 55 geo editor nf Tools gt Geo query gt Confirms drawing results Accept changes Tools gt Geo query gt Cancels drawing results Discard changes Coordinate Table of a Geo query Coordinates of a geo query are shown in a tabular form on the Geo editor panel in the view of e g Figure 27 Figure 56 The Geo editor table panel nen Query Latitude Longitude 62 30 46 54 H 43 191 5 06 E 63 00 12 52 M 44 26 50 05 E B25 04 ss Aes F SBE Jeppesen is a Boeing Company Page 54 of 56 ats To show the Geo Query panel run the Window gt Geo edito
37. mand Layer Status Indicators Different layer icons perform as visual indicators of layer status according to Table 12 Table 9 Shown layer icon Hidden layer icon Page 31 of 56 Jeppesen is a Boeing Company A Q NORWEGIAN CCREDITATIOI Explanations will be given in Setting the Active Status of a Layer on page 34 below about what active status of a layer means The User Object Panel On the User Object panel Figure 45 the user can edit attributes of a user object Figure 20 The User Object panel User Laver Object Edit object Area Attributes Description Example Colour M Bagr Colour Pattern RAER AERA E Cancel Delete object Geometry To open the UO panel run the Window gt User Object Panel menu command Information on User Objects on the Chart User objects are shown above electronic charts e g as shown in Figure 46 Figure 21 A user area on the chart iy Uy h ART C The list of user objects located at the position of a right click on the chart can be viewed on the User Objects tab on the Found List panel Page 32 of 56 Jeppesen is a Boeing Company Coordinate Table of a User Object Like coordinates of a geo query see Coordinate Table of a Geo query on page 54 those of a user object are also shown on the Geo editor panel Figure 27 in an editing mode User Layer Management Right after the start up the list of existi
38. n dynamic menu command the Catalogue Record panel automatically opens holding the entry description table Figure 16 To open the panel manually run the Window gt Catalogue Record menu command Queries to the Catalogue Entering Query Mode To enter the query mode 1 Run the Tools gt Catalogue gt Query Catalogue DB menu command the first page of the query wizard opens Figure 17 Jeppesen is a Boeing Company Page 47 of 56 NORWEGIAN ACCREDITATIOI Figure 46 The Query Wizard page 1 Select Database Record Type and Filter Database es Record Type Filter z User Defined Query r Load trom File Cancel Help 2 In the Database field select a sub catalogue from the list to which the query is addressed e g ZX Russian Federation Morintech Ltd or select the All databases option to address the query to all sub catalogues at a time Figure 47 Database All databases AU Russian Federation Head Department of Navigation amp Oceanography o0 Zimbabwe Survevor General Government of imbabywye GR Greece Hellenic Navy Hydrographic Service SE Sweden Syjotarteverket Swedish Martine Administration US USA Office of Coast Survey National Ocean Service NOAA a DEF Open ECDIS Forum Ifa query is addressed to a particular sub catalogue there is another query technique to obtain the same result Figure 19 right part that is to run the Qu
39. nciutcsasasscnceiehosdersaacecsesenevewewisvemecasencerss 34 Creation of a New SYMDON sisiceccscscisescssevennasensinncisanewectensecncnnstendeanivmatnenesnaecensvecsantvessmacavedsnaoieeous 35 Defining Attributes of the Sy TION oi cccaceecendeceetcenreceonncanseiineseee sdeanunpeationceteia ereendecedveneval coe deenetucectuntenweneestedees 35 Building Geometry of the New SYM ccsssessssssssesssessssssesseeeeeeeeeeeeseeeseeseeeeeeeeeeeeeeeeeeseeeseeeeeeeeseeeeeees 35 Creation of NCW SOCOM ccsssiccecchewscccesieeceseicsecessdeacsweasnceasnduewerstuacwecedesdeasanceacoanseeveapiescwedeasenneest 36 CGrealon Ola New LING ats ees elect wwe EEE 36 Building Geometry of a New Line cccsessssssssssssenssesseesseesseeseessseeeseeeeeesseeeeseeseeseseeesesesseseeseseeseeeseeeeees 37 Creaton Ola NEW AGO sarrerei EE EEEE EER EEEE 37 Building Geometry of a New Are a ccsesssessssssssssssesssensessssseeeseeeeseeeeseseseeseseseseeseseeesesseeeeesseeeseesseeeseeeeess 37 Creaton Ora TOKT ra a na sdcesauernasmeaucendaaeentsens 38 Page 4 of 56 Jeppesen is a Boeing Company Editing an Existing User Object assnnsnunennnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nnmnnn nnna 38 Editing Attributes Of a User ODJ Ciurana 39 Editing Geometry of a User Object snsssunsnsnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nnmnnn 39 Moving a Nodo VOIE X bvincurnusvtvccuseseneete acho sdeess O Ean ANE SED ARTA
40. ne Enter coordinates keeping to the rules formulated in Coordinate Input Rules on page 51 Keep in mind the following restrictions You cannot combine different classes of geometrical primitives in one query Use query combining tool described in Error Reference source not found on page Error Bookmark not defined for this purpose lf your choice was the On Area you cannot define more than one area in one query Use query combining tool described in Error Reference source not found on page Error Bookmark not defined for this purpose 4 Press Next on the second page of the query wizard The program offers another technique to enter the coordinates for a query specifically to draw select a geometrical primitive directly on a chart and take the coordinates from there This is the issue to be discussed in Geo Queries to the Catalogue on page 54 Coordinate Input Rules In these fields always enter coordinates as pairs of digits separated by spaces followed by a hemispheric sign For instance the entered string of the view 10 00 00 will be treated by the program as 10 00 00 N Other Query Options On the third page of the query wizard Figure 24 Jeppesen is a Boeing Company page 220 20 NORWEGIAN Figure 53 The Query Wizard page 3 Finish Query Frames Color Save as User Defined Save to File amp dd te Previous Guen Cancel 1 Left click in the F
41. ng layers appears on the UL panel Figure 44 Select a layer in this list with a left click and run one of the commands in the dynamic menu of Figure 44 e Show Hide Layer to show hide all objects of the layer on the chart Overview Layer to display the layer in an overview mode Center Layer to automatically bring the geometrical center of all objects of the layer into the center of the screen Start editing to enter the editing mode of an object of the layer see Editing an Existing User Object on page 38 for how to continue Delete Layer to delete the layer which implies deletion of all its objects Rename Layer to rename the layer Export All Import layer to export all import the layer to from an external file as described in Import Export of Layers on page 34 New Layer to create e new empty layer as described in Creating a New Layer on page 33 Creating a New Layer To create a new user layer 1 Press the I button on the ULE toolbar the New User Layer Name window opens Figure 47 Figure 22 Creating a user s layer New User Layer Name x my layer ome 2 Type in the new layer s name 3 Press the OK button Renaming an Existing Layer To rename an existing layer 1 Select its icon on the UL Panel and run the Rename Layer dynamic menu command Figure 44 the window of Figure 47 opens 2 Type a new layer name in this
42. nmnenes 29 Information Output to a Printer esiscescscscessesessesccasavecivetcesvesscssuseussuswcssencsvssuedveuscssseewarvecerescees 29 USer Layer EGINOK srren aa EE E EEEE 30 PUDO SO ieres Oeae 30 RSS MS CS Or ULE circa ectces cc ecctrscececst tan eeceenensansetesiesctseasveuetbesesusnresceusitoceevitseeieessteeeeuseets 30 ULE TOO Aaa cio acetic eter E 30 The doer Layer Pane leE ccna ceeds ceenuesesensceepeanes 31 Layer Siats MAIC ALORS sariren a iN thoassuteddntwedel seudaunaeewimedtcinnhut iceunaxdadewtoctoieeens 31 The User ODlSCt Pam Furo 32 Information on User Objects on the Chart cccscceeeceeeeeeeeeeeeeeseeeeeneesonseseesasesenseeonsesonseesnsnees 32 Coordinate Table of a User Object nuususnnununnnununnunnnnnnnnnnnnnnnnnunnnnnnnnnnnnnnnnnnnnnnnnn ennnen 33 User Layer Management ace atesccus socctcasesecerve caren ssceue segue caseoestexsscceusadeccersiseeuvevevenustsweatavendaeuvecees 33 Creating a New Laye enssins a a a Ra 33 Renaming an EXISUNG LAY CF e arrreenensne inaani anean aN anana Ran ENRE ARER RAA ERAN ARN ANRA RANAR RE A ARRAN AAEE R ERAS REN ENERE KRAE 33 MDO EX POM OF LAV CE S irys E EEO r 34 Creating a New Object of a Layer s sessnnssnnenunnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn ennnen nnmnnn nnmnnn 34 Setting the Active Status Of a La ayef ccceceeeceeeeeeeeeeeeeeeeeenseeeeeeeeeensesonseeeeenseeeneesonseeonsasenons 34 Entering the AGG Object MOG aiisicsaicsceiciasdcewsceaenncndatica
43. ogue in a Tabular FOr cccsssccssssecssseeessseesnsseeensseeensenesseenenses 45 Viewing an Entry in the Catalogue cssccsssssssecessseeessseessssesenseeenssaeenseeeenseneessenenses 46 Viewing an Entry in the Catalogue on the Chart ccccceeseeeeeeeeeeeeeeneeseeeesesceseeeesneeeenseenseeoes 46 View ing the Related Chart in the Archive ccccccccccecceseceeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeenenenenennnneness 47 Viewing an Entry in the Catalogue in the Table ccccceeeeceeceeeeeeeeeeeseeeeeeseeeeseeaeseeeeeeeeeenseeees 47 Queries to the Catalogue sage cases ec cs cere cceseecctceteccenccstecscecssecusecsuenstecisecsccsuerstessssauseassanstense 47 Emering QUIY MOOG issrsrrre iain E EEEE EEEE 47 SEHING Search Crier ON esapi aaa aaa aata 48 SC ale BaI SeA QUE aa EEEE ae eae eee eee aa an 49 Custom COG ea E E E E E E EE 50 Coordinate Ba sed Query s ssssnsnsnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nnmnnn 50 Coordinate Input PUSS cis sacsssyssecsnceudaciatuwetonsswveatiecnecedseudiceatwamssd asieasecnd stuwuies etaateeuuubwcduoedearaatwavensdetauinsdhs 51 OMEr QUCTY OD TON Sacarino a a EEEE 51 Saving and ACUSING QUETIES piiss n RSO 52 Running a Query to the CatalogUue sssssnsnsnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn nnmnnn 52 SimMphtied Qu ry R UtNe sasis assunmaaaaaaa ia aia pe aa a aaa hebak a a s a a aaie ae 53 VIEWING
44. on scale twice zoom Tools gt Standard gt Zoom Out out Sets the center click chart panning mode Tools gt Standard gt Panning mode Sets the continuous chart dragging mode Tools gt Standard gt Dragging mode Returns to the previous chart position and Tools gt Standard gt Position back presentation scale Undoes returns to the previous chart position and Tools gt Standard gt Position presentation scale forward and like Pans the chart to the left right etc Tools gt Standard gt Move view point left right etc Opens the Help window Help gt Help topics World Map Overview To overview the World map press the toolbar button or run the View gt Overview menu command Rescaling a chart z or toolbar buttons e To scale a chart in out twice click the To zoom in on a region of a chart drag the cursor across it with left hand mouse button pressed To continuously change presentation scale rotate the mouse wheel Page 23 of 56 Jeppesen is a Boeing Company A NORWEGIAN To change presentation scale one step back forward press the or toolbar button respectively a To display a chart in an Overview mode run the Overview command in the dynamic menu of Error Reference source not found If the presentation scale needed to display the chart in an Overview mode turns out small enough only the chart frame will be shown not separate objects on the chart To
45. or the visu No legend CONUS mosaic of 1990 MRLC dataset Style CONUS seamless mosaic of Landsat scenes Maximum resolution is 1 arc ees oe as second The default styles may have gamma sharpening and saturation filters Wo legend Display of Information from a OGC Server within a Pre defined Area 1 Press the OGC toolbar button drag the cursor across the area in the Chart View within which you d like to the selected OGC server data layer and leave the cursor inside that area 2 Switch on the check box at the left of the server layer name as shown in Figure 34 3 To cancel the display press the z OGC toolbar button Switching On the OGC Information Overview To switch on display of the entire OGC information of the selected layer press the OGC toolbar button Page 43 of 56 Jeppesen is a Boeing Company 3 A NORWEGIAN CCREDITATIOI Viewing Catalogue The Catalogue Tree At regular start up contents of the catalogue database is shown on the Catalogue panel as a tree of sub catalogues of national hydrographic agencies Figure 10 Figure 39 Catalogue Read Only wee Chart Folio Ta KW Kuwait Ministry of Ci LR Liberia Ministry of La 9 ery ZX Russian Federation W Cancel Query Export contents of Catalogue Database to File Refresh To load a national catalogue into the program run the Load Database dynamic menu command Figure 10 or click at the sign at the left Then expand th
46. que with the Customize window open To add a command button to a default menu menu ittem toolbar 1 Run the View gt Toolbars gt Customize menu command to open the Customize window Figure 5 Page 12 of 56 Jeppesen is a Boeing Company Figure 5 Adding acommand to a default menu _ dKLook 5 0 File View Tools Window Help CL S 1558397 DG e e 8 aax Sm iM Chart ist ax Name Scale Source North BaRiga_ Streets 2 000 City Plan 57 17 33 00 N Jurmala_20_1 20 000 Raster 56 59 54 24 N Categories Commands Drag e g Scale and drop it onto the main menu Commands Toolbars Menu Panel Options Overview Zoom In Zoom Out All Commands Toolbars Status Bar Ohana INNAN Description Scale 2 Drag and drop the command button from the list in the Commands text box on the Commands tab in the Customize window onto the default menu menu item toolbar as Figure 5 schematically illustrates Creating User s Toolbars 1 On the Toolbars tab in the Customize window press the New button the New Toolbar window opens Figure 6 2 Enter the new toolbar name in this window and press the OK the new toolbar appears on the screen Figure 6 Creating user s toolbar step 1 3 Fill in the new toolbar with buttons and commands using the drag and drop technique as shown in Figure 5 4 If necessary dock the new toolbar properly in
47. r table menu command or press the button on the toolbar Running a Point Based Geo Query 1 Press the button on the Geo query toolbar or run the Tools gt Geo query gt Insert points to geo editor menu command 2 Left click at the first point on the chart A colored cross stays on the chart 3 Left click at other points See coordinates of the points appearing in the coordinate table on the Geo Query panel in the view of Figure 27 4 Follow the query making routine until you reach the second page of the coordinate based query wizard Figure 23 5 On this page switch on the From chart option the coordinate table gets filled with coordinates of the points 6 Complete the query routine and run the query Running a Route Based Query 1 Press the button on the Geo query toolbar or run the Tools gt Geo query gt Insert line to geo editor menu command 2 Move the cursor along the route on the chart clicking at its waypoints Figure 28 Figure 57 Drawing a route At the same time see coordinates of the points appearing in the coordinate table on the Geo Query panel in the view of Figure 27 3 Having set the ending waypoint of the route right click 4 Press to confirm the configuration on the chart or x to erase it 9 Follow the query making routine until you reach the second page of the coordinate based query wizard Figure 23 6 On this page switch on the From chart option the coordinate
48. rames color field to select entry frame color on the chart on the standard palette that will then open 2 Switch on the Add to previous query check box to summarize the results of the new query to those of the latest one see more in Error Reference source not found on page Error Bookmark not defined Saving and Reusing Queries The conditions of a query can be saved to an external file or as ser defined The later means that the query conditions are saved and stored in the catalogue itself thus being directly available to the program user see the list of user defined queries in the drop list of the same name on the first page of the query wizard Figure 17 1 To save the conditions of the query as user defined type the user defined query name in the Save as use defined field Figure 24 2 To save the conditions of the query to an external file press Save to File Figure 24 and specify the full query file name in a standard Save as window that will then open To reuse a query previously saved to an external file 1 Press Load from file on the first page of the query wizard Figure 17 and specify the full query file name in a standard Open window that will then open 2 Press Next on the next pages of the wizard and eventually Finish on the last page to re run the query exactly in its original view or change the query conditions and then re run To reuse a user defined query 1 select its name from the list of u
49. ser defined queries in the User defined query drop list on the first page of the query wizard Figure 17 2 Press Next on the next pages of the wizard and eventually Finish on the last page to re run the query exactly in its original view or change the query conditions and then re run Running a Query to the Catalogue 1 Press Finish on the third page of the query wizard Figure 24 thus running the query Jeppesen is a Boeing Company Page 52 of 56 a Tat NORWEGIAN ACCREDITATION Simplified Query Routine If a query for e g ENC Cells is addressed to a particular sub catalogue e g ZK Russian Federation Morintech Ltd with a By scale criterion and you don t need extra query options described in Other Query Options on page 51 and Saving and Reusing Queries on page 52 follow the simplified query routine Specifically 1 Run the Query gt By Scale dynamic menu command as shown in Figure 25 the second page of the scale based query wizard will open right away Figure 21 Figure 54 F XY DEF Open ECDIS Forum E D 2 Russian Federation Morintech Ltd CUery All Records Cancel Query By Scale By Coordinates Open as Table Custom Refresh kree However the Finish button replaces Next in this case 2 Set scale conditions on this page as described in Scale Based Query on page 49 and press Finish By analogy run e g Query gt Custom dynamic menu command Figure 25 to
50. soft Windows NT 4 0 Service Pack 6 Microsoft Windows 2000 XP e 2 GHz CPU at the minimum e 256 MB of RAM at the minimum e 200 MB of free HDD space 1024x768 resolution 256 color monitor required Installing dKLook Installation Routine To install dKLook software 1 Log on with administrative rights 2 Insert the dKLook installation CD in your CD ROM drive 3 Double click dKLook msi installer icon in Explorer window the Installation Wizard starts 4 Follow the instructions from the Wizard that will appear on the screen 5 Restart the computer The program will be installed into the Program Files gt Jeppesen Marine directory Windows 7 and Windows Vista users dKLook users running Windows Vista or Windows 7 operating systems must be local computer administrator to get full use of the application and its functions Here in particular users having an active Catalogue Archive connection and OGC usage Page 6 of 56 Uninstalling dKLook To remove the program from the hard disk 1 Run Microsoft Windows uninstall utility by selecting its shortcut from Windows Start menu Start gt Settings gt Control Panels gt Add Remove Programs or select the shortcut Start gt Programs gt Jeppesen Marine gt dKart Look 5 2 gt Uninstall dKart Look 5 2 2 Follow instructions on the screen Starting Exiting dKLook Start and exit the program using the standard tools of Windows Page 7 of 56
51. ss the Delete last button to break off the rubber string and bind the cursor to the last but one marker Further pressing this button will erase the markers one by one binding the cursor to the previous marker Press the Delete All button to erase the entire chain of markers at once Using the Geo Position Tool Use the Geo position tool of the program to set a bookmark on the chart at a pre defined point and then to quickly find tt Setting a Bookmark on the Chart To set a bookmark on the chart 1 Press the button on the Geo position toolbar or run the Tools gt Geo position gt Open dialogue menu command to open the Positioning window Figure 42 Figure 17 The Positioning w indow x Position name Save Delete Position amp scale LAT 32 31 30 27 5 LOM 6015507 99 E Datum Wits 1984 Scale 1 25 000 To show hide the Geo position toolbar run the View gt Toolbars gt Geo position menu command Type the bookmark name in the Position name field In the Datum field set the datum which coordinates of the bookmark are going to be linked to 4 In the Scale field enter the scale value to set after the bookmark is found see Finding a Bookmark on the Chart on page 28 5 Enter the coordinates of the bookmark into the LAT and LON fields 6 Press Save Finding a Bookmark on the Chart 1 Select the name of the bookmark to find
52. status bar In this section Application look gt Sets the graphic interface style Graphic Interface Style on page 13 Dragging mode Sets the continuous chart dragging mode The Pan Drag Chart Modes on Panning mode Sets the center at cursor chart panning mode Page 24 Tools Table 4 The Tools menu Toolbar_name gt Duplicates a button on the toolbar name In relevant sections of the toolbar Manual Page 14 of 56 Jeppesen is a Boeing Company A Q NORWEGIAN CCREDITATIOI Settings Opens the program settings window Program Settings on page 15 The Window Menu Show Hide panels in the main window of the program as listed in Table 1 Program Toolbars Toolbars of the program will be illustrated below in relevant chapters of the Manual Program Settings Program settings are places on the tabs in the Settings window opened by running the Tools gt Settings menu command See the list of setting groups brief explanations of effects they produce and references to the related topics in the text on this Manual below in Table 5 Table 5 Program settings es e Adjusts chart presentation according to S 52 Adjusting Chart Presentation on page 24 Chart Layers Shows Hides chart layers Showing Hiding Chart Layers on page 25 Catalogue Catalogue chart frame presentation Presentation of the Catalogue in the presentation Chart View on page 44 Defines th
53. tically be scrolled down to the this ID Left click at the ID in the list the Open and Show buttons get enabled Press 6 Select to overview the frame of the entry on the chart Open to open the entry in a tabular form Figure 16 Jeppesen is a Boeing Company Page 56 of 56 a i NORWEGIAN CREDITATIOI
54. tion Messages Window gt User Shows Hides the User Object panel The User Object Panel on page 32 Layer Object Window gt User Shows Hides the User Layer panel The User Layer Panel on page 31 Layer Re docking Panels To dock a panel e g to the upper edge of the window Drag it holding by the title bar with the left hand mouse button pressed onto the wise control the upper part of the window the blue shaded stripe covers the upper part of the window and drop Figure 2 Page 11 of 56 Jeppesen is a Boeing Company Figure 2 Re docking a panel case 1 4 H olem Se Se The panel gets stretched across the whole main window To dock a panel e g to the upper edge of the Chart panel Drag it holding by the title bar with the left hand mouse button pressed onto the wise control in the middle of the Chart panel the blue shaded stripe covers the upper part of the panel and drop Figure 3 Figure 3 Docking a panel case 2 The panel gets stretched only across the Chart panel now To convert an independent panel into a tab on the other panel Drag it holding by the title bar with the left hand mouse button pressed onto the o wise control in the middle of the panel the panel gets shaded in blue and drop Figure 4 Figure 4 Making atab Customizing Default Menus and Toolbars To rearrange the default toolbar button and menu items use the drag and drop techni
55. ve the cursor onto the position of the new vertex and left click again Moving an Object as a Whole 1 Left click within the frame around the object Figure 58 2 Move the cursor to the new position of the object See the frame and the object inside following the cursor while it moves 3 Left click again Deleting an Existing Object To delete an existing object press Delete on the UO panel Figure 57 or press the 3 button Page 40 of 56 Jeppesen is a Boeing Company A NORWEGIAN ACCREDITATION Viewing OGC Server Information The program can display information provided by OGC servers Tools for Viewing Information from an OGC Server Buttons on the OGC sever toolbar run the functionalities are required for viewing information provided by OGC servers according to Figure 30 and Table 8 Figure 34 The OGC toolbar Table 10 The OGC toolbar a a ee ee Registers an OGC server Registering a New OGC Server on page 41 Drawing of an area to be overlaid with OGC information Deletion of an area to be overlaid Display of Information from a OGC Server within a with OGC information Pre defined Area on page 43 Redrawing of an area to be overlaid with OGC information Switching the OGC Server data Switching On The OGC Information Overview on overview page 43 Registering a New OGC Server 1 Press the OGC toolbar button the Registered OGC Servers window will open Figure 31 Figure 35 The Registered

User Manual - Jeppesen Commercial Marine

Contents

Download Pdf Manuals

Related Search

Related Contents