Double User Manual v11
Contents
1. LED Colors Guide Status Color Steady Blinking Orange Chargin Plugged In or g ane Docked Green Fully Charged Not Connected Green Connected ang Discoverable and Balancing Balancing Unplugged or 2 ean Not Connected Not Docked Blue ae a a Discoverable and arke Parked Red Low Battery Pole lowering as power Keyboard Controls for Chrome Command Action Up W Forward Down S Backward Left A Turn Left Right D Turn Right M Mute P Park Esc End Call Space Bar Look Down R hold Raise Pole U ser M anu al F hold Lower Pole For additional support please email support doublerobotics com Revision 11 Initial Setup 1 Take Double out of the box and stand it upright on a flat surface 2 Insert the iPad mount into the socket Figure A and screw in the bolt using the included hex wrench Figure B Figure B 3 Using the charging cable that came with your iPad plug one end into the USB port inside the iPad mount Figure C 4 Continue to wrap the cord around the channel until there is about 4 in 10 cm left to fit through the groove at the top 5 Insert the iPad upside down make sure Rotation Lock is turned off and be sure not to pinch the charging cable 6 Plug the Lightning or 30 pin connector into your iPad 7 Turn on Double by holding the power button for three seconds Figure D USB Port 8 Op2. e s iPad This will Prevent the iPad app from accidentally minimizing into the background if someone presses the iPad s home button or if you get notifications e Restart the app automatically if it crashes e Suppress iPad pop ups which may interfere with an active call Setup Guided Access Mode 1 On your Double s iPad launch Settings gt General gt Accessibility gt Guided Access 2 Go into the Double app and tap your iPad s home button three times to activate Guided Access mode Note While you don t normally need to turn Double off you can do so by holding the power button until the LED turns off about 3 seconds iPad is a trademark of Apple Inc registered in the U S and other countries
3. tional Attach the lens to the front of the mount Figure C Pair Bluetooth To pair your iPad with Double 1 Go to Settings on your iPad gt Bluetooth 2 Tap the row that says Double XX XXXXXX Create Account 1 On the iPad download the Double app from the App Store search Double Robotics 2 Launch the app and create an account if you don t already have one 3 The app will prompt you to allow Location Services Approving this will enable the driver to see Double s location on a map 4 If not prompted touch the gear icon in the upper right corner and switch from Driver Mode to Robot Mode 5 Once you have successfully logged in you will see the standby screen with the Drivers and Park buttons 6 To adjust the height of your Double swipe vertically anywhere on the right side of the screen To adjust volume swipe on the left side Drive Double 1 From the Driver iPad or Google Chrome on Mac or PC drive doublerobotics com log in to the account you just created 2 Your Double will appear on the map Tap or click to start a call Charge Double 1 Plug in the power cord to the back of your Double Figure D Figure D 2 The front LED will be orange while charging Charging takes about 2 3 hours 3 When Double has reached a full charge the LED will turn green Charging Power Button Guided Access Mode Connector We recommend that you enable Guided Access mode on your Doubl
Download Pdf Manuals
Related Search