User`s Manual GL-LED Down Light Surface Mount
Contents
1. GL LED Down Light surface Mount User s Manual Thank you for choosing the GL LED Down Light Surface Mount series LED products Please install and use the products according to the following directions to ensure the normal function and proper operation of the products If not to follow these instructions to properly install and normally use the products you will not get the warranty committed compensation or protection We will not take any responsibility for any product damage caused by improper installation or abnormal usage Installation Guidelines Step 1 Step 2 Remove the screws and the brace Attach the brace to the ceiling and connect the driver to the power wires Step 3 Step 4 Connect the power cord of lighting fixture to the driver The driver will be contained in the lighting fixture Secure the brace inside the fixture by screws on both ends to finish installation CAUTIONS To ease the installation process and ensure the optimal performance of the product carry out the installation 1 If the external flexible cable procedure in compliance with the following safety regulations e Unpack carefully and ensure there is no product damage during shipping Should the product be found damaged during or cord of this luminaire is shipping please return it to your supplier damaged it shall be exclusively e Unless otherwise specified never connect the device with any dimmer switch replaced by the manufacturer or2. e All the electrical wiring necessary for the proper installation of the LED Down Light is supposed to be conducted by his service agent or a similar qualified personnel to prevent electric shock or product damage qualified person in order to avoid e Avoid humidity Should the LED Down Light be moistened by any liquid or fluid that may conduct electricity immediately a hazard disconnect it from the power source e In case of a malfunction turn off the power source immediately Never try to repair the LED Down Light by yourself 2 Prior to installation remove the which may cause serious damage and void your warranty Instead contact your local dealer for technical assistance AC power e Please recycle the package e Never touch the luminaire when it turns on or gets hot e Unless otherwise specified never use LED luminaires in humid environments e Appropriate ambient temperature 20 to 40 C Troubleshooting e One of the following problems may appear while you use the LED lamp No light Check whether your LED lamp and all other accessories are properly fitted into the fixture adequately connected to the specified power source Fixture Cleaning To optimize the light output we recommend that you periodically clean the internal and external optical lenses as well as the reflection mirrors Only use a dry soft cloth a dust brush or a vacuum cleaner and never use any liquid chemical cleaner or water to clean the lamp All rights res
3. erved All brand names and trademarks are the properties of their respective owners 17 DLXXS000001
Download Pdf Manuals
Related Search