Home

Boyo Back Up Sensor Systems Users Manual

image

Contents

1. 4 GPS Click the GPS to see information DO v ny A gt Running speed display present driving speed San Diego TF gt Time display present time of playback file R alisti HEH FES gt Latitude display present latitude of playback file ipod HE gt Longitude Jai gt Bearing 5 Seeing Full Screen Click the Full Screen icon on upper part of PC Viewer to see it in full Click the Down Sizing to see it in normal size If the resolution of monitor is higher than the recorded file s resolution 1280x720p it displays original resolution as 1280x720p If the resolution of monitor is lower than the recorded file s resolution 1280x720p it displays according to the monitor s resolution 6 Setting PLAYLIST Car BlackBox Viewer ATTENTION To change Setting you should use the device at least once after inserting microSD card into the device before changing Setting 1 Insert microSD card into the device and turn it on After completing the booting turn off the device Take out microSD card from the device and insert it into the computer 2 Run PC Viewer Click OPEN and choose the drive of microSD card Then Files are listing at right side of screen Now you are ready to change Setting 3 After changing each value of setting click OK button 4 Take out miroSD card and insert it into the device Turn on the device and the new values are automatically setting during
2. 1 Set security LED is maintain the same status even the power off 3 Memory Format by button D Press Y O buttons lengthy at the same time it begins micro SD card format in inserted slot gt 2 pieces of LED are blinking with BLUE color until format completed Please backup the data before the memory format Deleted data by format is impossible to recovery Power off or remove the micro SD card during format It may hurt SD card and goods 7 Contents of Memory Info 1 Way of using the memory When the memory is left 300MB the firstly saved file in Record folder is automatically deleted consecutively in order to continue recording and saving 2 Minimum used memory To record the normal work there is Min memory 100MB necessary at least In case of recording with Min memory the recording may work irregularly 3 Used file size of memory microSD card 8GB EVENT Creating 40 files in the folder MOTION Creating 100 files in the folder MANUAL Creating 20 files in the folder Working status of LED and Buzzer means LED ON GPS OFF teDem LED Left Buzzer Voice Voice right Voice Voice right BEEP recording recording 99 recording recording ig ON OFF ON OFF ak lt Recording start RECORD 1 time beep shortly MOTION stand by means LED blinking 2 times beep shortly 1 time beep shortly in Manual button shortly 1 time shortly in parking m
3. HI O ed X E HI 8 Battery 1 Be sure to read carefully the following cautions hesita Do noi Do noi Do noi Do noi Do noi Do noi Do noi Do noi Do noi Do noi Do noi memo Advice Otherwis Strongly swelled battery is very dangerous Please contact manufacturer or seller without ion close the heat of fire Do not insert in micro wave range In summer time do not place inside car use or keep on high temperature high humidity use on coverlet electric carpet carpet for a long time place in airtight box in power on status for a long time contact metal part of necklace coins key and watch etc Use the guaranteed Li 2 cell battery disassembly compress piercing and so on drop from high rise place exposure over 60 C high temperature r contact moisture isposal guide throw used battery at random throw the battery pack into fire due to explosion or fire The way of battery disposal is different depending on countries on charging way Do not charge the battery in other way different from user manual mentioned e the battery may be explosive In case of uncontrollable power by wrong action press button You can power off by force Consist eS 8 lt Magnetic holder
4. Formatting Micro SD card Unusual recording Firmware UPGRADE 6 Buzzer status in RECORD Button working One beep shortly Unusual recording Repeating beep until power off Power OFF Two time beep lengthy 7 In case of Remove the micro SD card during RECORD gt Itis impossible to save the recording present file normally gt It may critical damage to micro SD card and goods D When remove the SD card from goods automatically reboot the system 8 Power off during RECORD D gt When turn off the power during RECORD present recording file in SD card is saved normally and turn off the power gt Buzzer beeps twice lengthy and power turns off at last gt In case of remove the micro SD card before LED off entirely last recording file may not saving or cannot playback the last file gt when power on before the power off entirely the goods maintains status of power on for some time 3 MOTION recording 1 Starting of MOTION gt When motion detected in lens angle range during parking or stopping recording starts for certain time The recording stops in stand by status when Motion disappeared gt Press button lengthy buzzer beep one time shortly And change over to motion recording mode Right LED light off and left LED light on to Blue color gt Recording stops in motion mode standby status gt Buzzer beeps twice shortly left LED light up to Red color until st
5. amp meta Aux to RCA cable optional F plate optional Video out cable optional Rear camera optional 1 There is PC Viewer program and the user manual in CD ROM Please install PC Viewer program into the computer to see the recorded files by the device as well as install PDF reader to see the user manual 2 Optional accessories may not come in the package depending on countries Features 2 0 mega pixel CMOS lens 110 wide angle of camera High definition recording resolution 1ch 1280x720 pixel Max 20 frames H264 2ch 640x480 pixel Max 10frames H264 rear camera optional Continuous recording function gt General recording creating files per minute in seguence Impact recording each 10 sec pre post of impact occurrence Manual recording each 10 sec pre post of button action Motion recording 20 sec recording after occurring motion Video input port for Rear camera 2CH IN Built in backup battery gt The last recording file saved in safe without power from car Built in 3axis impact sensor G SENSOR Built in high efficiency MICROPHONE Simultaneous recording Video and Audio data 3 Colors LED mounting Built in high brightness LED displaying working status Panorama security LED mounted Warning antitheft and interior effect in front of car External Video output port Built in RTC REAL TIME CLOCK Creating recording files by date and time u
6. 1 3 2 CMOS Visual angle 110 D 1ch HD 1280 x 720 P mpeg4 file format H264 codec 2ch VGA 640 x 480 P mpeg4 file format H264 codec Audio format AAC Advanced Audio Codec Recording way Video Recording media Micro SD card 4GB 32GB External output NTSC External GPS SIRF3 98g BOYO SENSORS BACK UP SENSOR SYSTEMS
7. G sensor default 8 steps G Sensor Sensitivity insensitive sensitive 8 6 Time Zone ATTENTION In case of the device WITH GPS you should use Time Zone to set your local time if you are outside Korea Default of device is GMT 09 00 Korea Incase of device WITHOUT GPS you should use Time Setting to set your local time 1 To set the time zone you should use the device at least once Insert microSD card into the device and turn it on After completing the booting turn off the device 2 Take out microSD card from the device and insert it into the computer 3 Run PC Viewer Click OPEN and choose the drive of microSD card Then Files are listing at right side of screen 4 Go to Setting gt Time Zone gt choose your GMT time zone and click OK 5 Take out microSD card from the computer and insert it into the device Turn on the device and the new time zone is automatically setting by GPS 7 Applying the each setting value gt After setting up each condition click OK to save the values in microSD card gt The new values are stored into setup cfg file in setting folder of micro SD card gt After inserting the microSD card into the device turn it on The new values are adjusted When setup cfg file of microSD card is deleted by force be sure to insert it into 1 the device and turn it on setup cfg file is automatically generated with default value Me
8. if it comes in the package optional 1 Attach the magnetic holder on the windshield of your vehicle 2 Attach the metal plate on the other side of external GPS 3 Remove the double side tape of device and attach it with GPS 4 Now you can attached detach the device on from the magnetic holder on windshield freely If magnetic holder amp metal plate optional does not come in the package the device should be attached on the clean place of the windshield of your vehicle Insert SD card into main body Beware of the insert direction In case of wrong insertion it may bring serious damages Connect car cigar adapter DC jack to Connect car cigar adapter to cigar socket power input port of car R COW ON the power button Start recording in status of LED on Basic way of using 1 Power on and start gt Press Power button to turn on the device gt During the booting 2 LEDs are blinking repeatedly with BLUE GREEN RED colors Normal recording begins with blue light after completing the booting 2 RECORD 1 Start of RECORD gt Light up Blue color of 2 LED Green colors GPS connection and Voice recording is ON Left LED blinking GPS connection and Voice recording is OFF It saves the all videos during driving to RECORD folder Audio One Audio recording Audio recording ON GPS OFF 2 Contents of RECORD folder gt RECORD file is created in Mic
9. the booting of device 1 Time Setting ATTENTION In case of the device WITHOUT GPS you should use Time Setting to set your local time if you are outside Korea Default of device is Korea time In case of device with GPS you should use Time Zone to set your local time 1 To change the date and time you should use the device at least once Insert microSD card into the device and turn it on After completing the booting turn off the device 2 Take out microSD card from the device and insert it into the computer 3 Run PC Viewer Click OPEN and choose the drive of microSD card Then Files are listing at right side of screen 4 Go to Setting gt Time Setting gt change the date and time manually 5 After changing the time and date click 119919 button and you will see the message Time settings have been saved gt click OK 6 Click OK to save it The new date and time is saved in the name of date Time cfg of setting folder of micro SD card 7 Take out microSD card from the computer and insert it into the device 8 Turn on the device and it will automatically be setting into the device 2 Setting the Voice Record gt ON OFF the Voice Record default ON 3 Setting the Security LED gt ON OFF the Security LED default ON 4 Setting the Buzzer gt ON OFF the Buzzer default ON 5 Setting the G Sensor Sensitivity gt Control the sensitivity of
10. used for the purpose of prevent deleting videos or taking pictures of landscapes and place want to save From RECORD to MANUAL 1 Start of MANUAL recording gt Press button one time shortly buzzer beeps one time shortly 2 pieces of LED light up to red color and starting manual recording gt The files are saved to MANUAL folder gt Total 20 sec pre 10sec post 10 sec of MANUAL files is creating O It is impossible to MANUAL recording during EVENT recording EVENT do not works during MANUAL recording even the impact happen 2 Contents of MANUAL folder gt MANUAL file is created in Micro SD card is making files of date time in sequence gt The file is creating the type of MAN 2010 12 12 14 30 56 avi and the meaning is year month day hour minute second avi of recorded time gt The number of recording files in MANUAL folder is depend on memory capacity In excess of Micro SD card capacity new date time folder and recording files is creating after deletion from the oldest file X enovabie piso T MANUAL x Ele gdt vew 1 AP RECORD setting 5 EVENT recording When the impact occurred impact sensor detect the impact and saving the files to another separate folder 1 start of EVENT gt Buzzer beeps twice shortly according to the setup sensitivity LED 2 light up and starts EV
11. ENT recording gt The files saving to EVENT folder gt Total 20 sec pre 10sec post 10 sec of EVENT files are creating 2 Contents of EVENT folder gt EVENT file is created in Micro SD card is making folder of date time in gt The file is creating the type of EVT 2010 12 12 14 30 56 avi and the meaning is year month day hour minute second avi of recorded time gt The number of recording files in MOTION folder is depend on memory capacity In excess of Micro SD card capacity new date time folder and recording files is creating after deletion from the oldest file DI xi 0 x gt AY Ele gdt view J ay Edt View Favorites Tool AP MANUAL MOTION RECORD setting uae it OE Aae During EVENT recording another impact appear again it is not works until 1 impact recording stops In power off during EVENT recording saving files for 20 sec and power turns off y ma X Voice Voice 6 Setting additional function recording ON Recording OFF 1 Voice Record ON OFF setup gt Press button shortly Voice recording ON or OFF default ON gt Voice recording ON Left LED is light up Voice recording OFF Left LED is blinking 1 Set Voice Record is maintain the same status even the power off 2 Security ON OFF setup gt Press 23 button lengthy On OFF the security LED default ON
12. edist exe gt visual c 2008 sp1 vcredist_x64 exe gt dotnetfx35langpack x64ko exe 2 Choose your Windows language and download each file from MicroSoft website 3 Install 4 files into the computer 4 After completing the installation turn off the computer and turn it on 5 Now install PC Viewer into the computer 1 Install PC Viewer into the computer gt Insert CD into the computer and go to the model name of folder example VTR107 gt Double click the installation file of PC Viewer and follow the instruction on the screen gt Click CarBlackBoxViewer exe to run PC Viewer Main Screen 1 Setting 2 Picture capture 3 GPS information window 4 Full screen 5 Channel screen turnover 6 Hidden program exit 7 RECORD folder 8 EVENT folder 9 MANUAL folder 10 MOTION folder 3 Menu bar la gt lI PLAY PAUSE 11 12 13 14 15 16 17 18 19 MEE RECORD EVENT MANUAL MOTION 1CH playback screen 2CH playback screen Present playback time Progressing playback status Total playback time Playback speed control Playback sound control Playback screen control menu Playback video list A a Search backward each frame in E Playback previous file g playback 2 Playback recoded file 6 Search forward each frame in playback EG Pause playback file Fast playback a Playback next file g Open microSD card Car BlackBox Viewer
13. mory Info Click the Memory Info to memory information of microSD card You can see detail information of each recorded folder i e RECORD folder EVENT folder MANUAL folder MOTION folder Memory Format Caution Click the Format to format microD card 1 Be sure to back up all data before format It is not possible to recover data after format Version Info Click the Version Info to see firmware version viewer version Firmware Download You can download the firmware to upgrade the device 1 Click Firmware Download 2 Press YES you will visit website Find the newest firmware file and download it into the computer 3 Copy and paste the firmware file into UPDATE folder of microSD card 4 Insert microSD card into the device and power on During updating 2 pieces of LED are blinking to Green color for 20 30 sec After updating re booting and starting recording 1 To download the firmware the computer should be connected with internet 7 Capture Click Capture to make a moment in jpeg photo file and enter the file name and save it Specification DC 12 24V Power consumption Max 420mA DC 12V RECORD recording per minute EVENT 10secs pre post of impact total 20sec MANUAL 10secs pre post of button works total 20 sec MOTION need separate device for general power Storage working a S SSN ANSA temperature range 0 000 0600 Camera 2 0M Pixels
14. nit Built in BEEP sound Inform the working status with BEEP sound amp OSD display Displaying the data and time on recorded video picture Function setting program Supply the program that control the function of system External GPS Recording location and driving speed etc via external GPS Name of each part Dafa Use to attach VTR107 on car glasses or attach metal Double side tape plate optional if it comes with magnetic holder in the package Fix the device after direction control D Right AWay cradle e vi direction control Up Down Right Cradle fixing screw Fix goods after angle Up Down Security LED Panorama moving LED light interior effect car security Power input port Supply the power to main system DC 12V Micro SD card slot Insertion slot of micro SD card 2ch connection port 2ch 2CH IN camera cable connect to this port External video out port Use to check the video via external display 10 GPS connection port Connect to external GPS set with jack Voice Motion ON OFF the Voice recording or motion parking recording button recording function Manual REC Security N OFF the M If i jon Ey LED button ON OFF the Manual forced or security LED function LED Left Inform the working status with color light up and LED Right blinking 115 Microphone Record audio sound by built in microphone Installation Notice How to use magnetic holder
15. ode button lengthily MOTION recording SD card format Firmware Upgrade In motion2 times shortly Q E3 Q 1 time shortly to format Unusual working Repeat beeps shortly Ea gg i e KI e i i o j 0 PC Viewer program Minimum System requirement for the installation of PC Viewer OS Windows XP SP3 or above Hardware Pentium 4 2 8GHz RAM 1GB or above Browser MicroSoft Internet Explorer 8 0 or above Direct X Direct X 9 0 JUNE 2010 or above Others Windows NET Framework 3 5 or above ATTENTION In case of the failure of PC Viewer installation you need to install the following files first If the computer is Windows OS 32bit 1 Go to www google com and search 4 files each mentioned below gt IE8 WindowsXP x86 KOR exe for Windows XP or gt IE8 WindowsVista x86 KOR exe for Windows Vista gt directx_Jun2010_redist exe gt visual c 2008 sp1 vcredist_x86 exe gt dotnetfx35langpack_x86ko exe 2 Choose your Windows language and download each file from MicroSoft website 3 Install 4 files into the computer 4 After completing the installation turn off the computer and turn it on 5 Now install PC Viewer into the computer If the computer is Windows OS 64bit 1 Go to www google com and search 4 files each mentioned below gt IE8 WindowsServer2003 x64 KOR exe for Windows XP or gt IE8 WindowsVista x64 ENU exe for Windows Vista gt directx_Jun2010_r
16. ops recording gt MOTION for 20 sec and creating continuous files by 20 sec in continual motion occurrence gt When press button lengthy motion mode stops and changeover to general recording mode In case of MOTION mode changeover RECORD mode for 2 3 sec delay In case of the changeover to MOTION mode during RECORD EVENT and MANUAL stops each recording files and change to MOTION mode for 2 3 sec delay gt The file is creating the type of MOT 2011 04 28 11 22 13 avi and the meaning is year month day hour minute second avi of recorded time gt The number of recording files in motion recording folder is depend on memory capacity In excess of Micro SD card capacity new date time folder and recording files is creating after deletion from the oldest file of x ll x k Vien le gat vew 17 dp oo a EVENT MANUAL SB f0T 2011 b4pe1123 RECORD setting UPDATE 3 In case of Impact sensor sensing during MOTION mode working gt Buzzer beeps twice shortly right LED light up to red color until stops event recording when impact detected in parking mode gt Total 20 sec pre 10sec post 10 sec of event recording files saving in event recording folder gt The created files are saved to EVENT folder Audio recording ON Audio recording OFF 4 MANUAL recording MANUAL is
17. ro SD card is making folder of date time in sequence gt The file is creating the type of REC 2011 04 29 12 21 11 avi and the meaning is year month day hour minute second avi of recorded time gt RECORD file is created every 1 minute gt The number of max 100 recording files is creating in one date time folder In excess of Micro SD card capacity new date time folder and recording files is creating after letion from the ol file deletion from the oldest file n Juni di 2 Removable pisk F3 mini x zax Fie Edt view Favorkes Took a Fle Edt View Favorites gt f0 04_29_12_16_04 E amp 04 29 1218 EVENT manual monon UA 3 Button working in RECORD mode BUTTON Press shortly Press lengthy Voice recording ON OFF Motion mode ON OFF default ON default OFF Menvalrecong SS eraut OM oo mmm 4 Impact sensor detection in RECORD mode gt Impact recording begins when sensing the impact during RECORD gt Total 20 sec pre 10sec post 10 sec of Impact recording files saving in EVENT folder gt Buzzer beeps twice shortly when impact recording beginning Right LED light up with RED color until impact recording stop 5 LED status in RECORD LED working status Left LED Right LED RECORD recording ON Voice recording OFF Voice recording ON MANUAL Voice Voice recording OFF recording OFF

Download Pdf Manuals

image

Related Search

Related Contents

BioStar Lite  Livret matricule manuel d`utilisation et de maintenance Use and  CT06 User Manual - Stanley Hydraulic Tools  Acer Aspire 4930 Series User's Manual  Personal Audio System  1 - Palm  DeLOCK 0.3m SATA M/M  Paradyne 8785 Network Card User Manual  Gemmy 89127 Instructions / Assembly  ClimateWell DB220  

Copyright © All rights reserved.
Failed to retrieve file