Home

SiPass Integrated - SIPASS_MP2.3_InstallManual_en

image

Contents

1. Smart Card reader not recognised during installa When installing a smart card reader that is not tion Error Message displayed recognised an error message will be displayed stating that the reader cannot be selected or is not available or not installed To rectify the situation uninstall the drivers and re install them again 35 Siemens Building Technologies SiPass2 3 Install Manual Fire Safety amp Security Products 12 2005 Keyword index Keyword index NET Framework Installation 14 C Clients Additional 16 D Database Maintenance 20 Size 20 E Enterprise Manager 10 11 12 20 Installation Summary 5 Installation of SiPass 13 Installing a remote bus 25 Installing SiPass additional clients 16 Helease Notes 13 Introduction 5 Microsoft SQL Server 2000 7 36 R Release Notes 13 Remote Bus 25 S SiPass Installation 13 SiPass Buss Service Log in 25 SiPass Server Service Log in 25 SiPass Services configuring 23 startup 24 SQL 2000 Agent Properties 10 Components 9 Database Size 20 Installation 8 Maintenance 20 Memory Properties 11 Personal Edition 9 SQL Licensing 8 Summary 5 U Uninstalling SiPass 18 Siemens Building Technologies Fire Safety amp Security Products SiPass2 3 Install Manual 12 2005 Issued by Siemens Building Technologies Fire amp Security Products GmbH amp Co oHG D 76181 Karlsruhe www sbt siemens c
2. 4 Double click on the Logins option in the left hand pane 5 Double click on sa in the Logins list The SQL Server Login Properties dialog will appear 6 Enter the updated password into the Password field 7 Select OK The sa login password has been updated Siemens Building Technologies Fire Safety amp Security Products SiPass2 3 Install Manual 12 2005 Installing SiPass 3 Installing SiPass SiPass is shipped with an easy to use installation program IMPORTANT Before attempting to install SiPass you should always consult the Release Notes that accompany the application These are located on the SiPass CD 3 1 Installing the SiPass Software The SiPass software installation can be performed in a number of ways depending upon the requirements of your facility Typical Installation A Typical installation will install the SiPass Server a Single SiPass Client and the appropriate files for the Graphics module Video imaging and Card Printing Mod ule Smart Card module Guard Tour Module and Elevator module if your license includes the installation of these modules Custom Installation A Custom installation will allow you to install any combination of the following SiPass Server SiPass Client CCTV bus SiPass CCTV Client SiPass SQL database Smart Card Recognition Messaging Complete Installation A Complete Installation will automatically select each module and option available includ
3. MSDE is able to support a maximum of one SiPass server and up to five clients Facilities larger than this will need to purchase and install the full SQL Server li cense MSDE is a run time application and is not provided with any data management software Therefore you are not able to configure the database through Enterprise Manager as SQL Server is configured This means backups and restores will need to be done solely through SiPass The procedures in this chapter describe the installation and configuration of the full SQL Server 2000 software application and do not apply if you are installing MSDE If you intend to use MSDE for your SiPass database it is also not completely nec essary to install MSDE before SiPass If no database is found during the SiPass installation MSDE will be installed automatically You will be prompted for confir mation however 7 Siemens Building Technologies SiPass2 3 Install Manual Fire Safety amp Security Products 12 2005 Microsoft SQL Server 2000 2 2 Microsoft SQL Server 2000 and Licensing Microsoft SQL Server 2000 is licensed in a much different way to that of previous versions of SQL However you still need to purchase the correct type and number of licenses before you can install SQL Server 2000 and run SiPass There are three different types of licensing options available for SQL Server 2000 to be used in conjunction with SiPass You will need to determine which is more suitable
4. 2005 Appendix B Connection of Enrolment readers e RS232 Readers SIEMENS AR6201 MX HID6055B MIFARE GemPlus CG1680 GemPlus GEX332 2 Connecting a SIEMENS AR6201 MX Reader to your PC 1 Remove the reader from its packaging 2 Connect the DB9pin to the RS232 COM port on your PC following the in structions supplied with the reader 3 Connect a 12V power to the rear of the DBP pin socket following the instruc tions supplied with the reader 4 The reader will now need to be configured please refer to the SiPass User s Manual for more information about configuring the reader s profile gt Connecting GEMPlus Readers CG1680 GEX332 Gem ProX P2 1 Ensure that you have the correct SiPass licence to use GEMPLUS readers 2 Remove the reader from its packaging 3 For GemEasyAccess332 solder into a DB9 pin connector as per reader in structions 4 For Gem ProX P2 plug the power adapter into the DB9 pin socket 5 Connect the DB9 pin into the RS232 COM port in your PC As instructed per the diagram below 6 Connect the power supply adapter into a power outlet 7 Install the GEMPLUS drivers required These are included with your SiPass CD You will need to unzip the file and install all drivers before proceeding 8 The reader will now need to be configured please refer to the SiPass User s Manual for more information about configuring the reader s profile 33 Siemens Building Tech
5. 6 Enter a user name into the User name field The password belonging to this username must be configured to never expire 7 Enter the password used for this account into the Password field NOTE It is highly recommended that you create a dedicated Windows User account for the SQL Agent Proxy account rather than use an existing administrator account The username for this account should be descriptive for example ADV SQL PROXY and the password must be configured to never expire 8 Enter the name of the Domain on which this account is held in the Domain field 9 Choose OK The Job System tab will re appear 10 Choose OK The SQL Server 2000 Agent properties are now configured NOTE If the username and password you supply for the Proxy account changes in Windows you must up date the username and password in the SQL 2000 Enterprise Manager by repeating the above proce dure Failure to do so may affect the ability to save records in SiPass 2 5 Configuring the SQL Server Memory Properties To allow SiPass to communicate with SQL and to ensure that memory is available when needed the SQL Server memory properties need to be correctly configured 2 Before you begin e Ensure that you have correctly installed SQL Server 2000 2 To configure the SQL Server Memory Properties 1 Choose Microsoft SQL Server Enterprise Manager from the Start Menu The Enterprise Manager window will appear Expand the Micr
6. at a facility To install this option select Smart Card from the feature list HR Interface Client This type of Client is installed on a PC to provide an interface to 3 Party Hu man Resource databases that can be used to help populate SiPass To install this option select only SiPass Core Files from the feature list NOTE The HR Client must be installed on the PC where the HR application or the HR application gateway is installed 8 Ensure other items in the dialog are marked with a red cross described as En tire feature will be unavailable Stop Ensure that the SiPass Server option is marked as described above so that the server will NOT be installed 9 Choose Next The SiPass Server dialog will appear if you are installing the Cli ent on a PC other than the SiPass Server PC 10 Enter the name of the PC where the SiPass Server has been installed into the Type Server Computer Name field 11 Choose Next The Ready to Install dialog will appear 12 Choose Next The SiPass Client installation will proceed and the progress in dicator will appear After completion the Setup Complete dialog will appear 13 Choose Finish The new SiPass client has now been installed 17 Siemens Building Technologies Fire Safety amp Security Products SiPass2 3 Install Manual 12 2005 Installing SiPass 3 3 Installing Additional Components If you purchased additional components or did not i
7. installing additional components the SiPass Install Wizard will complete the dialog with the details of the current installation 11 Select any additional features that you are installing for the first time 12 Choose Next The Ready to Modify dialog will appear 13 Choose Next The SiPass Client installation will proceed and the progress in dicator will appear After completion the Setup Complete dialog will appear 14 When the installation has finished the Setup Complete dialog will appear ORON 3 4 Uninstalling or Reinstalling SiPass 18 The uninstall program will remove the SiPass application application drivers regis try settings and directories from your computer The repair option in the uninstall program can be used to replace corrupted or deleted SiPass files It is highly rec ommended that you back up your SiPass database before performing any of the maintenance procedures described in this chapter If the PC on which you are operating has the SiPass Server installed and you IMPORTANT perform a modify or repair operation the Server will be restarted gt To uninstall SiPass 1 Choose Settings gt Control Panel gt Add or Remove Programs from the Win dows Start Menu Siemens Building Technologies Fire Safety amp Security Products SiPass2 3 Install Manual 12 2005 i Installing SiPass 2 Choose Add or Remove Programs The Add or Remove Programs window will appear 3 S
8. lui a t remis Contents 1 IMTFOGUCUON ssrin 5 1 1 Installation Summary ssssssssssssssseee eene 5 1 1 1 SiPass Server Install Checklist sse 6 2 Microsoft SQL Server 2000 eese ener 7 2 1 Microsoft SQL Server Desktop Engine sssseess 7 2 2 Microsoft SQL Server 2000 and Licensing sessesssss 8 2 3 Installing SQL Server 2000 8 2 4 Configuring the SQL Server 2000 Agent Properties 10 2 5 Configuring the SQL Server Memory Properties ssssss 11 2 6 The SQL Server sa login username and password 12 3 Installing SiPass eeeeeeeeeeeesseeee einen eren nennen nnns 13 3 1 Installing the SiPass Software sssssssssssseeene 13 3 1 1 Pre Installation Checklist seen 14 3 1 2 Installing the NET Framework eeeenn 14 3 1 3 The SiPass Installation sssssseeeeenns 14 3 1 4 Windows User Accounts essssssee eee ener 16 3 2 Installing an Additional Client sssseeeeenene 16 3 3 Installing Additional Components seen 18 3 4 Uninstalling or Reinstalling SiPass eese 18 4 Maintaining the SiPass SQL Server 2000 Databa
9. may wish to back up the current SiPass folder us ing the Windows Backup system tool You may also wish to backup the SQL da tabase using the SQL backup tools Note that this step is not compulsory 4 Ensure that the version of MSDE Server or SQL Server 2000 that you are run ning on the SiPass Server has been upgraded to Service Pack 3a 5 Ensure that all remaining SiPass Services have been stopped 6 Uninstall the current version of SiPass This MUST be done before installing the new version 7 Install the new version of SiPass 8 Log into the new version of SiPass 9 Restore the backed up database from step 1 When restoring the database do NOT select the System Settings and Local IMPORTANT 3 m f Settings options in the Restore Database dialog 10 Check the SiPass Audit Trail to ensure the database was successfully re stored 11 Exit out of SiPass and log back in for the changes to take effect NOTE All operators who belong to the Administrator operator group will be given privileges to the new database components All other operator groups will not automatically be assigned privileges you will have to manually assign new database privileges to the appropriate operator groups after upgrading 21 Siemens Building Technologies SiPass2 3 Install Manual Fire Safety amp Security Products 12 2005 Upgrading SiPass 5 1 SiPass Upgrade Paths 22 The following table displays the versi
10. 2 3 Install Manual 12 2005 MSDE Installation 28 4 You will be prompted to supply a location on the PC s hard disk to install the MSDE files into the Installation Folder field It is recommended that you use the suggested directory although the hard drive letter may be changed 5 Choose Finish The files will be unpacked to the specified location 6 Choose Run from the Windows Start menu 7 Enter into the Open field the location of the setup file that you unpacked in step 4 along with the parameters upgradesp sqlrun and SECURIT YMODE SQL The full command will look like the following C sql2ksp3 MSDE setup exe upgradesp sqlrun SECURITYMODE SQL Where C represents the letter of the hard drive on which MSDE has been in stalled NOTE This will retain your existing sa password You can change the sa password by following the proce dure on page 155 or by using the parameter SAPWD lt newpwas gt in the command line above 8 Choose Ok MSDE will begin installing When MSDE has finished installing the Windows Installer dialog will disappear MSDE is now installed on your system It is highly recommended that you restart your PC so that any changes can take affect especially if you are following an MSDE installation with a SiPass installation 2 To Install a New Version of MSDE 2000 Service Pack 4 ok Insert the SiPass installation CD ROM into your computer s CD ROM drive The CD RO
11. 2 3 Install Manual 12 2005 i o Installing SiPass 4 As for the previous dialog complete the second License Options dialog exactly according to the license agreement for the original installation 5 Choose Next 6 As for the previous dialog fill in the final License Options dialog exactly accord ing to the license agreement for the original installation 7 When the Select Features dialog is displayed select only the Client option s you are installing The table below lists the types of Clients that may be installed as part of SiPass Client Description This type of Client is installed on a PC to provide a GUI Graphical User Inter face for the system s operator s A SiPass Client is normally installed on the server PC and may also be installed on other PCs that form part of the access control system To install this option select Client from the feature list Data Synchronizer This utility allows you to import export and synchronize the SiPass database with data from another application To install this option select Data Synchronizer from the feature list CCTV Client This client allows you to view CCTV images on screen and to configure and control the CCTV equipment Refer to the CCTV User s Guide for more infor mation regarding the installation of CCTV components To install this option select CCTV from the feature list Smart Card This feature allows you to encode and use Smart Card technology
12. 7 Ensure that the By Percent option in the File Growth section has been selected and that an appropriate amount has been entered into the associated field 8 Also ensure that the Unrestricted file growth option in the Maximum file size sec tion has been selected 9 Choose OK The SiPass database will now automatically increase in size when necessary 20 Siemens Building Technologies SiPass2 3 Install Manual Fire Safety amp Security Products 12 2005 Upgrading SiPass 5 Upgrading SiPass If you are upgrading from a previous version of SiPass and wish to maintain your existing database several steps need to be followed to ensure a smooth transition between versions Not all previous versions can be upgraded successfully 2 Before you begin e Ensure that you have read the new version of SiPass Release Notes e Ensure that your system meets any new requirements for the version you are planning to install e Ensure you are familiar with backing up and restoring the SiPass database 2 To upgrade from a previous version of SiPass 1 Back up all components of your current SiPass database This includes backing up the database Audit Trail and Logbook backup Pp N STOP STOP Please note that when backing up your SiPass database the Audit Trail is not backed up automati cally so you will need to perform a manual back up of it in order to save it 2 Exit the SiPass application 3 As an added precaution you
13. 9 Choose Next You will be asked to supply a name for each CCTV Bus that you are installing The Bus Name dialog will appear for each type of CCTV Bus you 15 Siemens Building Technologies Fire Safety amp Security Products SiPass2 3 Install Manual 12 2005 Installing SiPass are installing If you purchased multiple buss licenses of the same type enter the names on a separate line by pressing CTRL Enter for a carriage return 20 If you are using the SiPass installation to install MSDE MSDE will be installed next The SQL Server dialog will appear You must supply a System Admin password for security reasons 21 Enter a suitable password into the Password field and re enter the same password into the Confirm Password field 22 Select Next You will be prompted to confirm that you want to continue the in stallation Ready to Install Application The MSDE installation is handled auto matically if required 23 Choose Next gt The installation will proceed and the installation progress indi cator will appear When completed the Setup Complete dialog will appear 24 Choose Finish Congratulations You have now successfully installed SiPass Integrated 3 1 4 Windows User Accounts After you have installed SiPass you must configure the user account s on the Si Pass Server and clients that will be used by the SiPass operators Read and Write privileges to the SiPass folder on the Server and Client hard dr
14. AE clients GCM Licenses Card Expansion and the number of Door Expansions purchased 15 Choose Next The Select Installation Type dialog will appear 16 Select the type of installation you want Custom Typical Complete If you have chosen to install MSDE as part of the SiPass installation you must choose the Custom option If you have an outdated version of SQL or MSDE and are installing the SiPass Server you must exit the installation and upgrade your database before installing SiPass Note that the above only applies in those cases where the Server is being installed The Select Features dialog will appear if you have chosen the Custom installa tion If you have chosen a Typical or Complete installation proceed to step 19 17 Select which features are to be installed by clicking on the hard drive icon for a particular feature and selecting Will be installed on the local hard drive from the drop down menu 18 Specify the destination for the SiPass software by choosing Browse This but ton will only be enabled if the SiPass Core Files option is selected from the list A default directory usually C Program Files SiPass will be nominated by the Install Wizard You may designate any hard drive as the host To change the de fault destination directory choose the Browse button and select a new location from the Browse dialog NOTE You cannot specify a network drive or remote PC for the SiPass installation directory 1
15. M should start automatically 2 From the SiPass Installation menu choose Install MSDE The MSDE installa tion page will appear 3 Choose Unpack MSDE with Service Pack 4 You will be prompted to supply a location on the PC s hard disk to install the MSDE files into the Installation Folder field It is recommended that you use the suggested directory although the hard drive letter may be changed 5 Choose Finish The files will be unpacked to the specified location Choose Run from the Windows Start menu Enter into the Open field the location of the setup file that you unpacked in step 4 along with the parameters SAPWD sapwd and SECURITYMODE SQL The full command will look like the following A no CAsgl2ksp3MSDEsetup exe SAPWD sapwd SECURITYMODE SQL Where C represents the letter of the hard drive on which MSDE has been in stalled and lt sapwd gt represents the sa password you have chosen 8 Choose Ok MSDE will begin installing When MSDE has finished installing the Windows Installer dialog will disappear You now have to use the SQL Server Network Utility to enable certain communica tions protocols to allow access to the MSDE database 2 To Enable these Communications 1 Open the Windows Explorer by selecting Programs gt Accessories gt Windows Explorer from the Windows Start menu 2 Navigate to the folder Siemens Building Technologies Fire Safety amp Security Products
16. PORTANT SiPass may be unable to communicate with the SQL Server 30 Choose Next gt The Start Copying Files dialog will appear 31 Choose Next gt to start copying the necessary SQL files A dialog will briefly ap pear as the setup program prepares the installation files The installation of the Microsoft Data Access Components MDAC will then be prepared NOTE If you are running any additional applications while installing SQL Server a further dialog may appear requesting that specific applications be terminated If this screen appears you must close the re quested applications to proceed with the SQL Server installation When the HTML Help files have been installed the SQL Server installation will begin A progress indicator will appear on screen to indicate the progress of the installation Once installation has been completed the SQL server will be started and any special installation options chosen will be installed The setup program will then register the Active X components that are necessary for the correct op eration of SQL Server Once the Active X components are registered your sys tem will be updated with the necessary information for the successful operation of SQL Server Once completed the Setup Complete dialog will appear 32 Choose Finish 33 The SQL Server installation process is now complete 34 Install the latest compatible SQL Server 2000 Service Pack Refer to the SiPass Release Notes for more info
17. SIEMENS Access Control SiPass integrated Installation Manual Fire Safety amp Security Products Siemens Building Technologies Lieferm glichkeiten und technische Anderungen vorbehalten Data and design subject to change without notice Supply subject to availability Sous r serve de modifications techniques et de la disponibilit 2005 Copyright by Siemens Building Technologies AG Wir behalten uns alle Rechte an diesem Dokument und an dem in ihm dargestellten Gegenstand vor Der Empfanger anerkennt diese Rechte und wird dieses Dokument nicht ohne unsere vorgangige schriftliche Ermachtigung ganz oder teilweise Dritten zuganglich machen oder auBerhalb des Zweckes verwenden zu dem es ihm bergeben worden ist We reserve all rights in this document and in the subject thereof By acceptance of the document the recipient acknowledges these rights and undertakes not to publish the document nor the subject thereof in full or in part nor to make them available to any third party without our prior express written authorization nor to use it for any purpose other than for which it was delivered to him Nous nous r servons tous les droits sur ce document ainsi que sur l objet y figurant La partie recevant ce document reconnait ces droits et elle s engage ne pas le rendre accessible des tiers m me partiellement sans notre autorisation crite pr alable et ne pas l employer des fins autres que celles pour lesquelles il
18. SiPass2 3 Install Manual 12 2005 MSDE Installation C Program Files Microsoft SQL Server 80 Tools Binn where C refers to the letter of the hard drive on which you installed the MSDE files Double click on the file SVRNETCN The SQL Server Network Utility will open Select Named Pipes and TCP IP from the Disabled Protocols list Choose Enable to move these protocols to the Enabled Protocols list Choose Apply to apply your changes You will be prompted to restart the MSSQL Server before any changes will take effect oxonosctO MSDE is now successfully installed on your system 2 To Change the MSDE sa Password The sa password provides a layer of security for your MSDE 2000 database As described in the previous procedures it is normally supplied as a command line parameter during installation However for reasons of security or other it can also be changed after installation To change this password you must run a command through the DOS command line as MSDE cannot be configured through an Enterprise Manager A batch file has been included on the SiPass CD to automate this process 1 Open the Windows Run dialog from the Start menu 2 Enter the full path to the Password bat file on the SiPass CD into the Run dia log this will be D Software CD ROM MSDE2000 Password bat Where D is the letter designated as your PC s CD ROM drive 3 Enter a space after the path and then enter the new
19. dow will appear 3 Choose the Administrative Tools icon by double clicking on it The Administra tive Tools window will appear 4 Double click on the Services icon The Services window will appear 5 Right click on the SiPassBus service you installed and from the pop up menu that appears choose Properties The SiPassBus Properties dialog will appear Choose the Log On tab 6 Choose the This account option The username and password fields will be enabled 7 Enter a valid Windows logon user name into the This account field 8 Enter the password for the account in the Password field 9 Confirm the password by re entering it into the Confirm Password field 10 Choose OK The logon account you selected will be applied to the SiPass4 Server Service 25 Siemens Building Technologies Fire Safety amp Security Products SiPass2 3 Install Manual 12 2005 Finding a Computer Name 7 Finding a Computer Name 26 Throughout this Installation Manual you will be required to enter the name of a particular computer on the network in order to carry out a procedure This name must be the same as that given to the computer when its operating system was in stalled Before you can locate the name of the computer workstation you must be logged on to that computer workstation and must have Windows open 2 To Find a Computer Name 1 From the Start menu select Settings gt Control Panel The Control Panel will appea
20. elect SiPass from the list displayed 4 Choose Change The Application Maintenance dialog will appear 5 Select the Remove option and choose Next A confirmation dialog will appear 6 Choose Next The SiPass Install Wizard will begin removing the program 7 After SiPass has been uninstalled a notification dialog will appear 8 Choose Finish The SiPass system has been uninstalled from the PC 2 To repair corrupted or deleted files 1 Choose Settings gt Control Panel gt Add or Remove Programs from the Win dows Start Menu The Add or Remove Programs window will appear 2 Select SiPass from the list displayed 3 Choose Change The Application Maintenance dialog will appear 4 Select the Repair option The Ready to Repair dialog will appear 5 Choose Next The installation progress indicator will appear When the SiPass installation repair has finished the SiPass Setup dialog will appear 6 Choose Finish NOTE If problems persist after performing a repair it is recommended that you back up your current data base and perform a full Uninstall and Reinstall of the software 19 Siemens Building Technologies Fire Safety amp Security Products SiPass2 3 Install Manual 12 2005 Maintaining the SiPass SQL Server 2000 Database 4 Maintaining the SiPass SQL Server 2000 Database Although SQL Server 2000 automatically performs various tasks to maintain your SiPass database there are several important func
21. es to start manually You may also stop these services at any time NOTE You must have local administrator privileges to change service settings The services needed for the proper operation of SiPass are as follows e SiPassServer service e MSSQLServer service The SiPassServer and SiPassBus Default Buss services are installed during the SiPass installation while the MSSQLServer service is installed during the SQL Server installation The following two procedures explain how to manually start stop or pause the SiPass services and how to change their start up operation 2 To Start Stop or Pause the SiPass Services 1 Start Windows XP on the pc where the SiPass Server software is installed 2 From the Windows Start menu select Settings Control Panel The Control Panel window will appear 3 Choose the Administrative Tools icon by double clicking on it The Administra tive Tools window will appear 4 Double click on the Services icon The Services window will appear 5 Select the service you wish to change by clicking on it once 6 Then do one of the following Start the Service By selecting from the options available from the menu to the left of the list of services or by right clicking on the service and selecting Start from the menu 23 Siemens Building Technologies Fire Safety amp Security Products SiPass2 3 Install Manual 12 2005 SiPass Services i Stop the Service By selecting from
22. for your network structure A Processor licence is recommended as it is the simplest unified licence solution Processor License option This type of license is required for each processor installed in every server which runs SQI Server or any server components This type of licence includes access for unlimited users and or devices that can connect from inside or outside the firelwall No additional Server or client access CAL licences are needed Server License option A service licence is needed for every server or any of its components are in stalled This would be needed for the SiPass server A client access licence is also needed with this option Device Client Access licence This licence is needed for each SiPass client installed such as a standard work station client HR client or CCTV client 2 3 Installing SQL Server 2000 Microsoft SQL Server 2000 stores and handles the data used by SiPass The SQL server software must be installed prior to installing SiPass 2 Before You Begin e Ensure that you have at least 300 MB of available hard disk space on the PC s Hard Disk Drive where the software is to be installed It is recommended that you ensure as much space as possible is available e f you are upgrading from SQL Server 6 5 you must uninstall it using your SQL Server 6 5 disk before upgrading Alternatively you can upgrade SQL Server 6 5 with Service Pack 5 and then upgrade to SQL Server 2000 without u
23. g MSDE 2 Before You Begin e Ensure that you have at least 300 MB of available hard disk space on the PC where the software is to be installed e f you have previously installed a version of SQL server on the PC where you in tend to install MSDE and SiPass ensure that you have completely removed this version of SQL Server before commencing the installation of MSDE e The MSDE installation procedure is separated into two types The first procedure should be followed if you are upgrading a current installa tion of MSDE 2000 to MSDE 2000 Service Pack 3a Sp3a Follow this proce dure if you have installed a version of MSDE 200 Server and it has not been upgraded to SP3a The second procedure describes how to create a completely new installation of MSDE 2000 Service Pack 3a Follow this procedure if you do not have any installed versions of MSDE 2000 or SQL Server on the Server PC It is highly recommended that you install MSDE on the same PC on which the IMPORTANT SiPass server is installed 2 To Upgrade an existing installation of MSDE 2000 to MSDE 2000 Service Pack 3a 1 Insert the SiPass installation CD ROM into your computer s CD ROM drive The CD ROM should start automatically 2 From the SiPass Installation menu choose Install MSDE The MSDE installa tion page will appear 3 Choose Unpack MSDE with Service Pack 3a 27 Siemens Building Technologies Fire Safety amp Security Products SiPass
24. he Installa tion Definition dialog will appear which displays a number of installation options 18 Select the Server and Client Tools radio button 19 Choose Next The nstance Name dialog will appear 20 Select the Default checkbox 21 Choose Next The Setup Type dialog will appear 22 Choose the Typical radio button 23 If necessary you may wish to specify a location of installation other than the de fault location To do this simply choose the Browse button and select a new lo cation for the installation of the SQL Server Program Files and the SQL Data Files It is recommended that you accept the default locations as the installation directories for both the Program Files and the Data Files 24 Choose Next The Services Accounts dialog will appear 25 Select the Use the same account for each service Auto start SOL Service radio button option 26 Select the Use the Local System account radio button option 27 Choose Next The Authentication Mode dialog will appear 28 Select the Mixed Mode radio button option 9 Siemens Building Technologies Fire Safety amp Security Products SiPass2 3 Install Manual 12 2005 Microsoft SQL Server 2000 29 Ensure that the Blank Password checkbox is not selected Enter and confirm a password for the sa SQL Server Authentication account Make sure you do not forget this password If correct authentication mode and password options are not correctly selected IM
25. iPass2 3 Install Manual 12 2005 i i Installing SiPass NOTE From this point onward in the SiPass installation you may exit by choosing the Cancel button 7 Choose Next The SiPass License Agreement dialog will appear 8 Select the I accept the license agreement option to enable the Next button once you read and understand the terms of the end user license agreement 9 Choose Next The Hardware Type dialog will appear 10 Choose the SiPass platform that you intend to install according to the license that you have purchased by checking the corresponding option 11 Choose the Next button The License Options dialog will appear 12 Complete the fields in the License Options dialog according to the details that appear on your Validity Check form issued with your License Key Site Name Name of the Facility Serial Number License serial number License Key The License Key recorded on your Validity Check form Card Technology The access card format that you have purchased with your SiPass license Site Site Code used Facility Facility Code used NOTE Refer to the Validity Check form that was provided with your software for more details about complet ing the License Options dialog 13 Choose Next A new License Options dialog will appear 14 Enter the details into each field including Workstations Number of Buses HR Interface Clients Number of CCTV stations OPC
26. ing 1 of each CCTV Bus type NOTE i The Human Resources Interface is installed as a minimum for each installation type 13 Siemens Building Technologies SiPass2 3 Install Manual Fire Safety amp Security Products 12 2005 Installing SiPass 3 1 1 Pre Installation Checklist The following should be adhered to before attempting to install the SiPass soft ware e f SiPass is being re installed or upgraded ensure that you have backed up your existing database so that you can resiore it later e If the Database option is selected during the installation any existing database will be overwritten and all existing data will be lost e f SiPass is being re installed ensure previous versions have been uninstalled e Ensure that the GC1680 drivers are installed if required for the following read ers GC1680 GEMPLUS332 e Ensure that Microsoft Windows XP and the appropriate Service Pack if re quired have been installed on the target workstation e Ensure that Microsoft SQL Server has been installed if you are using SQL Server as the SiPass database e f you are using MSDE it does not need to be installed before SiPass e Ensure that you have previously configured the SQL Server Agent Properties and Memory Properties Please note that this does not apply to MSDE users e Ensure that you have sufficient hard disk space available to install the software e Ensure that you have sufficient RAM memory to
27. isplayed in the left hand side 15 Select the DCOM Config option 16 Right click on the advaNTage Server icon and choose Properties 17 Select the Security tab 18 From the Launch and Activation Permissions select Customize 19 Choose Edit 20 Ensure that Everyone is added to the group displayed 21 Ensure that the Remote Activation option is selected for the Everyone group 22 Choose OK 23 Choose OK again 24 Close the open dialogues 25 Finally ensure that the Windows XP SP2 Firewall has been disabled ONO WD 2 To configure SiPass Client settings remote clients only 1 From the Windows Start menu select Settings Control Panel The Control Panel window will appear From the Control Panel select Administrative Tools Then select Component Services In the Component Services window expand the Component Services option Then expand the available Computers Right click on the My Computer icon and choose Properties Select the Default COM Security tab Choose the Edit Limits button for Access Permissions oe 0012 OI Siemens Building Technologies Fire Safety amp Security Products SiPass2 3 Install Manual 12 2005 Appendix A Windows Service Pack 2 settings 9 Ensure that the Remote Access option is enabled for the Anonymous Logon 10 11 12 13 14 15 16 Choose OK Now choose the Edit Limits button for Launch Permissions Ensure all permissions are enabled for Everyo
28. ives must be as signed to the appropriate Windows users in order for SiPass operators to be able to create and save files like card templates and images 3 2 Installing an Additional Client 16 SiPass allows you to install clients on more than one PC in a network A client pro vides the GUI Graphical User Interface that is used by the SiPass operator to administer and monitor your access control and security system Only one client of each type can be installed on any single PC in your system NOTE Ensure that your License Agreement permits you to configure an additional Client If your License only allows the installation of a single Client please contact your distributor to obtain an additional License 2 Before You Begin e Ensure that you have installed the SiPass Server software e f you are installing a Client on a workstation other than the Server ensure that the target workstation has been configured on the same network e Identify the name of the computer where the SiPass Server has been installed NOTE It is recommended that you exit all Windows programs before running the SiPass setup program 2 Installing a SiPass Client 1 Follow the procedure To Perform a SiPass Installation to step 8 2 Fill in the License Options dialog exactly according to the license agreement for the original installation 3 Choose Next Siemens Building Technologies Fire Safety amp Security Products SiPass
29. n It is recommended that you con sult this resource for more detailed information if required Read the Release Notes This option will display the release notes for the SQL software Visit Our Website This option will take you to Microsoft s SQL Server homepage 6 Choose SQL Server 2000 Components The nstall Components menu screen will appear 7 Selectthe Install Database Server option The Setup dialog will briefly appear followed by the Welcome dialog NOTE Depending on your operating system and the installation options selected other options may appear during the installation In these instances you should follow the on screen prompts 8 Choose Next The Computer Name dialog will appear 9 Selectthe Local Computer option 10 Choose Next gt The setup program will briefly search for previously installed components Once the search has been completed the nstallation Selection dialog will appear This screen provides a number of installation alternatives 11 Se ect Create a new instance of SQL Server or install Client Tools 12 Choose Next The User Information dialog will appear 13 Enter your name or the name of the person who purchased the software into the Name field 14 Enter the name of your company into the Company field 15 Choose Next The Software License Agreement dialog will appear 16 Read the full agreement carefully 17 If you agree with the Software License Agreement choose Yes T
30. ne Choose OK Choose OK again Close the open dialogs Finally ensure that the Windows XP SP2 firewall has been disabled 31 Siemens Building Technologies Fire Safety amp Security Products SiPass2 3 Install Manual 12 2005 Appendix B Connection of Enrolment readers Appendix B Connection of Enrolment readers 32 Enrolment readers are easily connected to SiPass via your client PC These read ers fall into two categories RS485 readers and RS232 readers The following sec tion is divided into two parts and explains how to connect both types of readers For more details on the reader connections or troubleshooting please refer to the individual manual provided with that reader e RS485 Readers CerPass Registration Reader Siemens Proximity Reader gt Connecting a Siemens Proximity Reader CerPass Registration Reader to your PC 1 Remove the reader its from packaging 2 Connect the reader via an RS485 to RS232 converter to the RS232 port of your SiPass client PC following the instructions supplied with the reader 3 Connect a 12V power supply to the power connector on the readers following the instructions supplied with the reader 4 Configure the reader for operation with SiPass following the instructions in the User s Manual Fig 1 Connection of a Siemens proximity reader Siemens Building Technologies Fire Safety amp Security Products SiPass2 3 Install Manual 12
31. ninstalling e f you are upgrading from SQL Server 7 0 you should uninstall this before up grading using the Windows Add Remove Programs function It is recommended that you install SQL Server 2000 on the same PC as the SiPass Server If you install SQL Server 2000 on another PC some functionality may not work correctly in particular the image verification and cardholder re porting IMPORTANT gt To Install SQL Server 2000 1 Start Windows on the pc where the database software is to be installed 2 Insert the SiPass SQL 2000 CD ROM into the local CD ROM drive The CD ROM should start automatically if it does proceed to step 5 3 From the Start menu select Run The Hun dialog will appear 8 Siemens Building Technologies SiPass2 3 Install Manual Fire Safety amp Security Products 12 2005 Microsoft SQL Server 2000 4 Enter d autorun exe into the Open field and choose OK Where d repre sents the drive letter for you CD_ROM drive 5 The SQL Install Menu screen will now appear The Menu screen will display a number of selectable options as follows SQL Server 2000 Components This option will allow you to install the SQL Server 2000 files SQL Server 2000 Prerequisites This option displays the pre requisites for installing SQL Server 2000 Browse Setup Upgrade Help This option displays a help file that contains information regarding the installa tion of SQL Server 2000 Personal Editio
32. nologies SiPass2 3 Install Manual Fire Safety amp Security Products 12 2005 Appendix B Connection of Enrolment readers 2 Connecting a HID6055B Reader to your PC 1 Remove the reader from its packaging 2 Connect the DB9 pin socket into the RS232 COM port in your PC following the instructions supplied with the reader 3 Connect the power cable into a 12V power supply adapter following the in structions supplied with the reader 4 The reader will now need to be configured please refer to the SiPass User s Manual for more information about configuring the reader s profile 34 Siemens Building Technologies SiPass2 3 Install Manual Fire Safety amp Security Products 12 2005 Appendix C Troubleshooting Appendix C Troubleshooting The following troubleshooting table may help you to overcome errors during the in stallation of SiPass or its associated peripheral devices Error Solution Unable to Open printer dialogue Ensure that a printer has been configured in the Print Setup option under the SiPass File Menu system If this does not rectify the problem and does not allow the local client to be used simply set the printer as a local printer and then return it to the network printer option Reader Name not verified When configuring readers in SiPass and assign ing the reader with an Image Verification mode of operation the following symbols cannot be used in the name of that reader I 2 lt gt
33. nstall all of the components that you purchased originally you can install those components for example the Messaging module or an additional Bus onto your existing SiPass system During the installation of a new component SiPass will automatically complete the fields in the License dialogs with the components and features currently installed The only details you need to change are the new license key and those new com ponents which have been purchased If you are installing additional components you may be asked for your SiPass installation CD during installation 2 To Install Additional SiPass Components 1 Choose Settings gt Control Panel gt Add or Remove Programs from the Win dows Start Menu The Add or Remove Programs window will appear Select SiPass from the list displayed Choose Change The Application Maintenance dialog will appear Select the Modify option The Hardware Type dialog will appear Select the same hardware type as the installation to which you are adding a component 6 Choose Next The License Options dialog will appear 7 Enter the new License Key you obtained when ordering the additional compo nent s as well as any changes made to the details in this dialog 8 Choose Next The second License Options dialog will appear 9 Change only those values for which you have purchased additional components 10 Choose Next The Select Features dialog will appear Like the License dialogs when
34. om fsp 2005 Copyright by Siemens Building Technologies AG Data and design subject to change without notice Supply subject to availability Printed in the Federal Republic of Germany on environment friendly chlorine free paper Document no A24205 A335 B247 Edition 12 2005
35. ons of SiPass that can be upgraded SiPass 2 01 SiPass 2 1 Sipass 2 11 SiPass22 SiPass23 o No No SiPass 2 0 Yes No N SiPass 2 01 Yes No Yes No SiPass 2 1 Yes Yes Yes SiPass 2 11 Yes Yes SiPass 2 2 Yes For information on upgrading versions of SiPass previous to SiPass 2 2 consult your local Customer Support Representative Siemens Building Technologies Fire Safety amp Security Products SiPass2 3 Install Manual 12 2005 SiPass Services 6 SiPass Services The SiPass Server runs using Windows background services These services allow access control events and communications with system controllers to be main tained even when the SiPass client is not running Although these services are configured to run automatically when SiPass has started it may be necessary to temporarily stop one or all of them 6 1 Configuring SiPass Services When you install the SiPass software a background service for the server and for each bus driver is installed These services allow SiPass to function correctly even if the client is not active In order for SiPass to control access for example perform an event task and to communicate with any components in your access control system these services must be functioning By default the services start automatically when the workstation on which they are installed is switched on If necessary you may change the default settings and configure these servic
36. osoft SQL Servers folder then the SQL Server Groups folder 3 Right click on Registered Server Folder and select Properties from the dis played pop up menu The SQL Server Properties Configure dialog will appear Select the Memory tab Tick the Reserve physical memory for SQL Server checkbox Ensure that the Minimum query memory KB is set to 1024 Choose OK An information dialog will appear Choose Yes The MSSQL Server Service and SiPass Server Service will now be stopped and restarted so that the changes can take effect This may take a few minutes N ONDE 11 Siemens Building Technologies SiPass2 3 Install Manual Fire Safety amp Security Products 12 2005 Microsoft SQL Server 2000 2 6 The SQL Server sa login username and password 12 During the installation of SQL Server 2000 you supplied a Windows username and password to be used as the sa login This username and password increases the security of your database However if the password that you supplied changes you will need to reflect this change in SQL Server 2000 Not doing so may affect the ability of operators to save records in SiPass 2 To change the sa login password 1 Choose Microsoft SQL Server Enterprise Manager from the Start Menu The Enterprise Manager window will appear 2 Expand the Microsoft SQL Servers folder then the SQL Server Groups folder 3 Expand the Registered Server Folder then select Security from the tree
37. ot start automatically when the PC is booted The service cannot be started manually either 7 Choose OK NOTE The SiPass Server and Buss services must be functioning for the correct operation of SiPass It is recommended that you do not change the default settings of these two services 6 2 Configuring the SiPass Server Service Log On Account i 24 In a multi server environment SiPass servers and external applications need to communicate with one another To allow a remote server to access SiPass re sources on the local machine the SiPass Server service needs to be assigned a username and password from a Windows user account The Windows account used cannot be a local account it must be valid for the entire network on which the servers in question are located NOTE If you have installed any of the following SiPass options it is highly recommended that you perform this procedure Not doing so may cause problems attempting to access SiPass resources from other SiPass servers or external applications Siemens Building Technologies Fire Safety amp Security Products SiPass2 3 Install Manual 12 2005 SiPass Services e Multi site Access Management e Human Resources Interface e OPC Alarm and Events Client e OPC Alarm and Events Server Interface e Time and Attendance Interface e DVR Interface 2 To configure the SiPass Server service log on account 1 Start Windows XP on the pc where the SiPass Ser
38. r 2 Double click on the System icon The System Properties dialog will appear dis playing the General tab by default 3 Choose the Computer Name tab The Network Identification details will appear The Computer Name tab displays the Computer Name together with the Domain Name if you are connected to a domain type network When performing any procedure in this Installation Manual that needs this informa tion the Computer Name must be typed exactly as it appears in this dialog Siemens Building Technologies Fire Safety amp Security Products SiPass2 3 Install Manual 12 2005 MSDE Installation 8 MSDE Installation i SiPass allows you to install a scaled down version of SQL Server called Microsoft SQL Desktop Engine MSDE for small to medium facilities The installation proc ess for MSDE is very simple It is not necessary to perform an MSDE installation before SiPass if you are choosing MSDE During a normal SiPass installation MSDE can be installed auto matically If you choose to install MSDE yourself though follow the instructions in this appendix NOTE The sections To Change the MSDE sa password and To Change the MSDE Proxy Account User name and Password still apply If you have installed MSDE Service Pack 3a on the PC on which the SiPass Server is located it is unnecessary to install MSDE itself This is because MSDE Service Pack 3 automatically installs MSDE as well 8 1 Installin
39. requirements as outlined in the SiPass series Product Sheets Ensure that the PC has been correctly configured on your computer Network All appropriate permissions shared resources dates and other network devices should be configured correctly Ensure that the person carrying out the installation has local Administrator privi leges on the PC on which SiPass is being installed Set the date and time of the PC Install any additional peripheral devices that may be required This includes printers which may be networked Video capture cards and cameras Ensure that Microsoft Internet Explorer Vers 5 IE5 or later has been installed Install the NET Framework from the SiPass Installation CD Install Microsoft SQL Server 2000 and appropriate Service Pack Please note that this step is not required if you are using MSDE as this will automatically in stalled during your SiPass installation Configure the SQL Server 2000 Agent Properties does not apply to MSDE Configure the SQL Server 2000 Memory Properties does not apply to MSDE Install SiPass onto the PC If choosing the custom installation option ensure that both the database and server options are selected when performing the installa tion Install any additional SiPass Clients If these additional clients are to be installed on a PC other than the server ensure that the PC has been configured correctly and meets the requirement
40. rmation about the service pack required 35 Configure the SQL Server Agent Properties and SQL Server Memory Properties as outlined in the following sections 2 4 Configuring the SQL Server 2000 Agent Properties 10 In order for SiPass to communicate with SQL some of the advanced properties need to be configured If you do NOT set the Agent Properties prior to installing SiPass you will be prompted during the SiPass install to supply a proxy account This account is used by SQL 2000 Server for non System Administration jobs 2 Before you begin e Ensure that you have correctly installed SQL Server 2000 2 To configure the SQL Server 2000 Agent Properties 1 Choose Microsoft SQL Server Enterprise Manager from the Start Menu The Enterprise Manager window will appear 2 Expand the Microsoft SQL Servers folder followed by the SQL Server Groups folder then the folder representing the Registered Server and finally the Man agement folder as shown in the following screen capture 3 Right click on SQL Server Agent and select Properties from the displayed pop up menu The SQL Server Agent Properties dialog will appear 4 Select the Job System tab Siemens Building Technologies Fire Safety amp Security Products SiPass2 3 Install Manual 12 2005 Microsoft SQL Server 2000 5 Uncheck the Only users with SysAdmin privileges then Choose the Re set Proxy Account button The SQL Agent Proxy Account dialog will appear
41. roughly in combination with different ver sions of Windows and other 3rd party applications it is possible that a 3rd party application running on the same PC as the SiPass Server or Client may cause unpredictable results It is recommended that you test your environment fully before going live with your SiPass system Summary The following summary provides an overview of the complete SiPass server instal lation process This includes the various system components that need to be in stalled and configured prior to and following the installation of the SiPass software It is recommended that this summary be used as a guide only and users unfamiliar with the installation process consult the relevant sections of this manual for more information Use the checklist on the following page to manually tick off items as you proceed through the installation This will ensure nothing is missed and will assist in trou bleshooting 5 Siemens Building Technologies Fire Safety amp Security Products SiPass2 3 Install Manual 12 2005 Introduction 1 1 1 SiPass Server Install Checklist 6 Please use the following checklist to ensure all necessary installation steps have been performed It has been included on a single page so that it can be photocop ied or torn out and used to mark down any completed installation steps Install the Windows Operating System and appropriate Service Pack on to a PC that meets all the system
42. run SiPass SQL and other modules simultaneously e It is strongly recommended that you exit all Windows programs before running the SiPass setup program Ensure that you have logged on as an administrator or have been allocated IMPORTANT local administrator privileges on the workstation where the SiPass software is being installed 3 1 2 Installing the NET Framework The Microsoft NET framework needs to be installed for SiPass versions 2 1 or later If you do not have the NET framework installed on the Server PC SiPass will automatically install the latest version before SiPass is installed 3 1 3 The SiPass Installation 14 2 To perform a SiPass Installation 1 Start the Windows operating system 2 Insert the SiPass CD into the local CD drive The installation process should be gin automatically If not proceed to Step 3 Otherwise proceed to Step 5 3 From the Start menu select Run The Run dialog will appear 4 Since your SiPass software is supplied on a CD ROM type d Setup exe to start the install procedure Where d indicates the drive letter for yu CD ROM drive 5 Choose the OK button 6 The SiPass nstallation screen will appear The pre installation program allows you to perform tasks such as reading the Release Notes Follow the instructions and proceed to the SiPass install The Welcome to SiPass dialog will appear Siemens Building Technologies Fire Safety amp Security Products S
43. s as outlined in the SiPass series Product Sheets Assign appropriate read write privileges to the SiPass folder to each Windows account used to run SiPass Configure and set up SiPass Refer to the SiPass User s Manual for more infor mation Configure the SQL Server Service Logon account Siemens Building Technologies Fire Safety amp Security Products SiPass2 3 Install Manual 12 2005 Microsoft SQL Server 2000 Microsoft SQL Server 2000 Microsoft SQL MSSQL is the system that meets the numerous and complex da tabase needs of SiPass MSSQL provides the level of software security necessary to safeguard the records created and modified in SiPass The following table indicates the supported software platforms both operating en vironment and database on which SiPass will run SQL 2000 SP3a MSDE SP3a or or later later Windows 2000 No No Yes Yes Windows XP No No Yes Yes 2 1 Microsoft SQL Server Desktop Engine Small to medium facilities may be able to use an alternate version of SQL server called MSDE or Microsoft SQL Server Desktop Engine MSDE is a scaled down version of SQL server suitable for systems that do not require the capabilities of a full sized Database Management Solution MSDE is much easier to install and maintain than SQL server and can be distrib uted free with SiPass depending on the license you purchase However these benefits come at a small cost
44. sa password The Run dialog will appear similar to the following Press the OK button The default password will be changed to the password you just entered 29 Siemens Building Technologies Fire Safety amp Security Products SiPass2 3 Install Manual 12 2005 Appendix A Windows Service Pack 2 settings Appendix A Windows Service Pack 2 settings 30 The SiPass Service Pack 2 SP2 incorporates many new and exciting features that will enhance the access control operation and security at any facility using the ACC hardware platform Those installations using a combination of Windows XP and SP2 should observe the following 2 To configure SiPass Server settings 1 From the Windows Start menu select Settings Control Panel The Control Panel window will appear From the Control Panel select Administrative Tools Then select Components Services In the Component Services window expand the Component Services option Then expand the available Computers Right Click on the My Computer icon and choose Properties Select the Default COM Security tab Choose the Edit Limits button for Access Permissions 9 Ensure that the Remote Access option is enabled for the Anonymous Logon 10 Choose OK 11 Now choose the Edit Limits button for the Launch and Activation Permis sions 12 Ensure that the Remote Activation option is enabled for Everyone 13 Choose OK 14 Expand the available My Computer option d
45. se 20 4 1 Configuring the Automatic Database Size sssssssssss 20 5 Upgrading SIPass eei idees 21 5 1 SiPass Upgrade Paths sss 22 6 SiPass ServiCces center e r aaa Aa ae aaan anataat 23 6 1 Configuring SiPass S rViCeS cccecceeseeceeeeeceneeesaeeeeeeeseeeeesaaeeseneeeeaes 23 6 2 Configuring the SiPass Server Service Log On Account 24 6 3 Configuring the SiPass Buss Service Log On Account 25 7 Finding a Computer Name eeseessseeeeeenenen nennen nennt 26 8 MSDE Installation riii cene recie te ed ane ciae Les ne cuan eeris 27 8 1 Installing MSDE ere aca Het te edidi edes 27 Appendix A Windows Service Pack 2 settings sese 30 Appendix B Connection of Enrolment readers sees 32 Appendix C Troubleshooting e eeeeeeeeeeeeeeseee een nn nennen tnnt nnne nnn 35 Keyword Index ornnes 36 Introduction 1 Introduction P EN 1 1 Installation Congratulations on choosing the SiPass integrated access control and security solution SiPass integrated is the leading access control software on the market This nstallation Manual explains how to install the SiPass software IMPORTANT Please be aware that while SiPass Integrated is tested thou
46. the options available from the menu to the left of the list of services or by right clicking on the service and selecting Stop Restart the Service By selecting from the options available from the menu to the left of the list of services or right clicking on the service and selecting Restart Pause the Service By selecting from the options available from the menu to the left of the list of services or right clicking on the service and selecting Pause Resume the Service By selecting from the options available from the menu to the left of the list of services or right clicking on the service and selecting Resume 2 To change the start up operation for the SiPass Services 1 Start Windows XP on the workstation where the SiPass Server software has been installed 2 From the Windows Start menu select Settings gt Control Panel The Control Panel window will appear 3 Choose the Administrative Tools icon by double clicking on it The Administra tive Tools window will appear 4 Choose the Services icon by double clicking on it The Services window will ap pear 5 Double click on the name of the service you wish to modify change The Service Properties dialog will appear 6 Change the Startup Type by selecting an option from the drop down list Automatic The service will be started automatically when the machine is booted Manual The service must be started manually Disabled The service is disabled and will n
47. tions you can carry out to im prove the performance and security of your SiPass access control and security system SQL 2000 performs the following maintenance tasks automatically e Automatic registration of the SiPass database in the Enterprise Manager e Automatic database size management e User connection management e Automatic truncate on Checkpoint operation However to ensure that SiPass runs as efficiently as possible the following main tenance tasks can be performed e Configuring the automatic database size 4 14 Configuring the Automatic Database Size SQL Server Version 2000 allows the database to expand and grow automatically without the need for user intervention This procedure outlines the options that can be selected to correctly configure this operation 2 To automatically expand the asco4 database 1 Start Windows XP 2 Choose Microsoft SQL Server Enterprise Manager from the Start Menu The Enterprise Manager window will appear 3 Expand the Microsoft SQL Servers folder followed by the SQL Server Groups folder then the folder representing the Registered Server and finally the Data bases folder as shown in the following diagram 4 Select asco4 by clicking on it once The asco4 database options will appear in the pane located on the right hand side of the Enterprise Manager window 5 Select Properties from the Action menu The asco4 Properties dialog will ap pear 6 Select the Data Files tab
48. ver software was installed 2 From the Windows Start menu select Settings Control Panel The Control Panel window will appear 3 Choose the Administrative Tools icon by double clicking on it The Administra tive Tools window will appear 4 Double click on the Services icon The Services window will appear 5 Right click on the SiPassServer service and from the pop up menu that ap pears choose Properties The SiPassServer Properties dialog will appear Choose the Log On tab 6 Choose the This account option The user name and password entry fields will become enabled 7 Enter a valid Windows logon user name into the This account field 8 Enter the password for the account in the Password field 9 Confirm the password by re entering it into the Confirm Password field 10 Choose OK The logon account you selected will be applied to the SiPass4 Server Service 6 3 Configuring the SiPass Buss Service Log On Account If you have installed a remote Buss service you will need to ensure that the SiPass Buss service has been issued a valid Windows username and password for the network on which the SiPass Server is located A local account cannot be used for the Logon account of a remote Buss service 2 To configure the SiPass Buss Service logon account 1 Start Windows XP on the pc where the SiPass Server software was installed 2 From the Windows Start menu select Settings Control Panel The Control Panel win

Download Pdf Manuals

image

Related Search

Related Contents

Vinci VS-1001 User's Manual    PROFESSIONAL CARE®  製品組立・取扱説明書    MONITOR DE PURGA PARA LA SOLDADURA EN TITANIO    µR20000 Service Manual  American Power Conversion CTEG4M User's Manual  Kenroy Home 91584BRZ Instructions / Assembly  

Copyright © All rights reserved.
Failed to retrieve file