TESTO manuale giuditta USA 27-09-12
Contents
1. MONG A ATTENTION Y THIS ADJUSTMENT CAN BE 1 DIFFICULT WITHOUT THE Sf OF THE USER X A NS NN 55555 N 17 41 o r1 G DC A ADJUSTING THE INCLINATION OF THE SEAT BOTTOM TILT IN SPACE REAR VIEW 18 41 CLOSING THE FOOTRESTS ADJUSTING THE FOOTRESTS IN HEIGHT 1 UNSCREW THE NUTS AND REMOVE THE SCREWS USING THE KEYS SUPPLIED 2 POSITION THE FOOTREST AT THE DESIRED HEIGHT 3 INSERT THE SCREWS AND TIGHTEN THE NUTS 19 41 o m r1 G D A TURNING THE LEGRESTS 1 PULL THE POMMEL 2 PIVOT THE LEGREST TOWARD THE OUTSIDE A ATTENTION CLOSE THE LEGREST JUST PIVOTING IT TILL ITS INITIAL POSITION toward the inside A CLICK MEANS IT IS LOCKED 20 41 Oo 2 E1 G D GI REMOVING THE LEGRESTS 2 TAKE THE LEGREST OUT 1 PULL THE POMMEL 21 41 ADJUSTING THE LEGREST INCLINATION 1 PULL THE LOCKING LEVER 2 AT THE SAME TIME ADJUST THE INCLINATION OF THE LEGREST 000000 LOCKING LEVER 22 41 OROGOA TURNING THE CALFRESTS o m r1 G DG OPENING THE SIDE SUPPORTS 1 PULL2. ALWAYS ATTACH THE BELTS ON THE FIRST TWO CORDS AS IN THE FIGURE ABOVE WE RECOMMEND TO FIX THE PADS WITH THE ARMRESTS LOWERED 28 41 ASSEMBLING THE ACCESSORIES RECLINABLE TABLE 824 R adjustable in inclination backwards forwards A ATTENTION a insert the table in order that the table plane is horizontal fig 2 b Tighten well the clamping lever and the handwheels of the table fig 1 and 2 C Before changing the inclination of the seat bottom tilt in space MAKE SURE THAT THERE ARE NO HOT OBJECTS or LIQUID CONTAINERS on the table that could cause DAMAGE or BURNS when they tip over CLAMPING LEVER FIRST INSERT THE LEFT TABLE ROD LONGER TO FACILITATE INSERTION 29 41 ADJUSTING THE DEPTH OF THE TABLE 000000 fig 1 ADJUSTING THE TILT OF THE TABLE CLAMPING LEVER fig 2 30 41 OROGOA FIXED TABLE 824 F AA Rm TIGHTEN WELL THE HANDWHEELS OF THE TABLE HANDWHEEL FIRST INSERT THE LEFT TABLE ROD LONGER TO FACILITATE INSERTION REAR VIEW GE o m raft ABDUCTION BLOCK 834 A ATTENTION TIGHTEN WELL THE HANDWHEEL 32 41 FoorREST Lock 914 It locks the two foo
3. size 36 Dimensions in cm 100 128 size 40 size 45 size 50 A Seat bottom width cm 36 cm 40 cm 45 cm 50 B Seat bottom depth cm 36 40 43 cm 36 40 43 cm 42 45 47 cm 42 45 47 C Armrest height cm 70 75 cm 70 75 cm 70 75 cm 70 75 D Backrest width cm 52 cm 56 cm 61 cm 66 F Total width cm 54 cm 59 cm 64 cm 69 H Seat bottom inclination tilt 10 27 10 27 10 27 10 27 1 Backrest inclination 26 with B at 36 cm 28 with B at 40 cm 35 with B at 43 cm 25 with at 36 cm 27 with B at 40 cm 30 with B at 43 cm 28 with B at 42 cm 30 with B at 45 cm 35 with B at 47 26 with at 42 cm 28 with B at 45 32 with B at 47 cm Aid weight kg 29 5 kg 30 5 kg 31 5 kg 32 5 Max capacity kg 140 kg 140 kg 140 kg 140 Hypen separated numbers indicate the minimum and maximum range of adjustment 11 41 PACKING INFORMATION GIUDITTA A B VOLUME Size 36 75 65 40 40 75 65 p Size 45 75 65 42 Size 50 79 71 81 0 454 43 HOW TO REMOVE THE GIUDITTA WHEELCHAIR FROM THE BOX 1 AN ATTENTION CUT WITHOUT PRESSING TOO HARD PRESS GENTLY WITH THE KNIFE SO AS NOT TO DAMAGE THE CONTENTS OF THE BOX 2 REMOVE THE ACCESSORIES TILT THE BOX AND TAKE CARE NOT TO SCRAPE THE
4. 09957 6 oS o O 2 gt lt tilt in space wheelchair X tilt in space wheelchair model 812 USE AND MAINTENANCE HANDBOOK DELI ORIGDA TABLE CONTENTS WARNINGS 3 GUARANTEE isis cce facce onda ora xen y a Ra aaa ad SDN Cu BRI ER a dai 5 HOW STORE AND TRANSPORT THE MEDICAL DEVICE 5 SOME EXAMPLES OF WHAT NOT TO DO WITH GIUDITTA 6 HOW TILT THE WHEELCHAIR TO CLIMB UP CURBS see 7 LABELS AND 4 4 1 1111 teste sata sinas snas ansa snas snas Eanan ai 8 ABOUT THE GIUDITTA WHEELCHAIR Intended use eese 8 TECHNICAL FEATURES and MODELS 9 INITIAL PREPARATION 1 12 FIXING THE HEADREST eee ence eet e Eas 13 FIXING AND POSITIONING THE LEGREST esee 14 USING THE GIUDITTA WHEELCHAIR 16 BRAKING THE WHEELCHAIR B30 MODELS with 30cm rear wheels 16 BRAKING THE WHEELCHAIR B12 MODELS with four 12cm wheels 16 ADJUSTING THE TILT OF THE 17 ADJUSTING THE INCLINATION OF THE SEAT BOTTOM TILT IN SPACE 18 CLOSING THE FOOTRESTS atit Ete teo b te mb 19 ADJUSTING THE FOOT
5. CONTENTS DURING REMOVAL 12 41 FIXING THE HEADREST i SA D AW CLAMPING LEVER INSERT THE HEADREST AND LOCK IT WITH THE CLAMPING LEVER TO ADJUST THE HEADREST SEE PAGE 24 13 41 FIXING AND POSITIONING THE LEGREST SIDE VIEW 14 41 1 INSERT THE LEGRESTS THE TWO PINS AS SHOWN IN THE FIGURE 2 ROTATE THE LEGRESTS TILL THEY ARE CLOSED 3 ACLICK MEANS THEY ARE NOW LOCKED MAKE SURE THAT THE LEGRESTS ARE INSERTED AND DO NOT TURN 4 PUSH DOWN THE LEGRESTS 15 41 o qm r1 G D 6G USING THE GIUDITTA WHEELCHAIR BRAKING THE WHEELCHAIR B30 MODELS with 30cm rear wheels BEFORE THE USER GETS IN OR OUT OF THE WHEELCHAIR AND BEFORE ADJUSTING ANY OF ITS PARTS YOU MUST BRAKE THE AID 000000 Vau BRAKING THE WHEELCHAIR B12 MODELS with four 12cm wheels lt N ATTENTION BEFORE THE USER GETS IN OR OUT OF THE WHEELCHAIR AND BEFORE ADJUSTING ANY OF ITS PARTS YOU MUST BRAKE THE AID UNLOCKS 16 41 ADJUSTING THE TILT OF THE BACKREST A __ A 2 REAR VIEW y IB
6. DES swing away to facilitate the user getting on and off ARMS padded and height adjustable CORNER PROTECTORS padded for the knees FOOTRESTS flip up and height adjustable LEG SUPPORT tilt and height adjustable swing away to help the operator get close as the user gets on and off and with flip up FOOTPLATES for an easy access to elevators and small rooms Provided with padded CALFRESTS 9 41 Dimensions cm 115 145 105 F 100 128 size 36 size 40 size 45 size 50 A Seat bottom width cm 36 cm 40 cm 45 cm 50 B Seat bottom depth cm 36 40 43 cm 36 40 43 cm 42 45 47 cm 42 45 47 C Armrest height cm 70 75 cm 70 75 cm 70 75 cm 70 75 D Backrest width cm 52 cm 56 cm 61 cm 66 F Total width cm 54 cm 59 cm 64 cm 69 H Seat bottom inclination tilt 10 27 10 27 10 27 10 27 26 with at 36 cm 25 with B at 36 cm 28 with B at 42 cm 26 with B at 42 cm Backrest inclination 28 with at 40 cm 27 with at 40 cm 30 with B at 45 cm 28 with B at 45 cm 35 with B at 43 cm 30 with B at 43 cm 35 with B at 47 cm 32 with B at 47 Aid weight kg 32 kg 33 kg 34 kg 35 Max capacity kg 140 kg 140 kg 140 kg 140 Hypen separated numbers indicate the minimum and maximum range of adjustment 10 41 115 145 105 GIUDITTA B12 TILT IN SPACE
7. DRY PLACES THE OPERATING ENVIRONMENT HAS NO PARTICULAR INFLUENCE ON THE DEVICE UNLESS IT IS USED INCORRECTLY such as by leaving it parked for a long time in direct sunlight or exposed to bad weather such as rain or in marine environments where the salt air could corrode the paint and sliding parts IN THIS CASE WE RECOMMEND CAREFULLY CLEANING AND DRYING THE FRAME FOLLOWING THE INSTRUCTIONS SHOWN IN THE MAINTENANCE CLEANING AND DISINFECTION CHAPTER ON PAGES 39 40 AND THE WARNINGS ON PAGE 40 5 41 ORIGDA AN SOME EXAMPLES OF WHAT NOT TO DO WITH GIUDITTA DO NOT USE THE DEVICE WITH SUBJECTS OF LARGER DIMENSIONS OR WEIGHT than shown on pages 10 and 11 DO NOT ALLOW CHILDREN TO USE THE DEVICE OR EVEN PLAY WITH IT DO NOT PLACE EXCESSIVELY HOT LIQUID CONTAINERS OR OBJECTS ON THE TRAY SURFACE that could cause damage or burns if overturned DO NOT ALLOW ANYONE TO STAND ON THE FOOTREST OR THE BACK OF THE WHEELCHAIR DO NOT USE THE WHEELCHAIR TO CARRY THE USER UP AND DOWN STAIRS the wheelchair s structure was not designed for that purpose DO NOT LIFT THE WHEELCHAIR BY THE FRAME OF THE LEGREST OR THE FOOTREST to climb over obstacles NEVER LEAVE THE USER UNATTENDED ESPECIALLY ON THE BEACH OR NEAR A RAVINE SWIMMING POOL SLOPE OPEN FLAME OR STAIRS DO NOT CARRY THE USER OVER ROUGH OR STEEP SURFACES OR STAIRS NEVER LEAVE THE AID PARKED ON SLOPING GROUND DO NOT CLIMB CURBS OR STEPS WITH JUST THE SIDE
8. G THE WHEELS At least once a month clean the wheels of residues threads hair etc that can build up on rotating parts 39 41 LUBRICATION The product does not need any special lubrication except if the wheels are not turning freely In these cases use a commercial grease spray paying attention to the warnings on the container AFTER LUBRICATION DRY THE TREATED PARTS WELL TO REMOVE THE RESIDUAL LUBRICANT contact the retailer where you purchased the product who will determine whether they need to be repaired or replaced to avoid dangerous situations that could cause accidents If you notice any INEFFICIENCY even partial of the BRAKES immediately A Do NOT perform maintenance or replace parts or accessories when the user is in the device Intensifie all checks in marine environments clean more often anoint the parts exposed to salt corrosion such as chrome bolts and screws EXTRAORDINARY OR CORRECTIVE MAINTENANCE EXTRAORDINARY MAINTENANCE MEANS ANYTHING DONE TO THE PRODUCT THAT IS NOT MENTIONED ABOVE IN THE PARAGRAPH ORDINARY MAINTENANCE WE RECOMMEND THAT THE USER RETAILER AND HEALTH FACILITIES ENTRUST ALL EXTRAORDINARY OR CORRECTIVE MAINTENANCE TO THE MANUFACTURER OR OTHER FACTORY AUTHORIZED SERVICE CENTRE ANY OTHER SOLUTION WILL MAKE THE USER AND THE THIRD PARTY MAINTAINER FULLY RESPONSIBLE FOR THE RESULTS OF THEIR WORK AND THE MANUFACTURER WILL ONLY BE LIABLE FOR ORIGINAL DEFECTS
9. OF MATERIALS OR WORKMANSHIP CLAIMED AT THE TIME OF PURCHASE If the product is be disposed of it must be done according to the law in the country of destination CUSTOMER SERVICE AND SPARE PARTS Only contact the retailer where you purchased the product for service and replacement parts 40 41 CONDITIONS DURABILITY REUSE AND REASSIGNMENT TO A NEW USER Granted that Ormesa products should be selected evaluated and ordered for the needs of an individual user reuse is however possible with the respect the following conditions Based on the experience of other similar sold models on technological progress on the guarantees of the Quality Management System certificated in 1998 according to ISO 9001 there is adequate confidence that the average lifespan of the GIUDITTA is about 5 years on condition that it is used according to the directions given in the user manual Only when the conditions for storage and transport of chapter HOW TO STORE AND TRANSPORT THE MEDICAL DEVICE are followed the periods in which the product is stored at the dealer should not be considered in that time period Factors unrelated to the product such as the development of the user its diseases the use and the surrounding environment can make significantly lower the duration of life of the product on the contrary if the indications on the use and maintenance are properly observed the reliability of the product can extend well be
10. RESTS IN HEIGHT nenea nana ne 19 TURNING THE EEGRBESTS ite eae ete etse 20 REMOVING THE 21 ADJUSTING THE LEGREST INCLINATION esee 22 TURNING THE CALFRESTS 23 ADJUSTING THE HEIGHT OF THE ARMRESTS 23 OPENING THE SIDE 24 ADJUSTING THE 25 ADJUSTING THE DEPTH OF THE nenea 26 REMOVING THE UPHOLSTERY FOR THE WASHING 27 ASSEMBLING THE 55 5 22 2 29 RECLINABLE TABLE 824 R ceste c d eene ia 29 FIXED TABLE 824 F etel net eta deed 31 GHEST STRAP 828 2 IR e RE cte 31 ABDUCTION BLOCK 834 teh pe OR s 32 GI aede ek aet 33 REMOVABLE FOOTPLATE COVERING 892 35 PADDED LEG PANEL 916 tbc teg 36 REMOVABLE TABLE COVERING 896 38 MAINTENANCE CLEANING AND DISINFECTION eren 39 CUSTOMER SERVICE AND SPARE PARTS esee nea tentent aaa aaa 40 CONDITIONS FOR DURABILITY REUSE AND REASSIGNMENT TO A NEW USER 41 2 41 omrraggtmu Carefully read
11. RY 3 MONTHS OR AT DIFFERENT FREQUENCIES ACCORDING TO THE USE i e regular persistent or heavy OF THE AID BY ITS USER 1 at three months from purchase 2 at six months from purchase 3 once a year for subsequent years after that of purchase Clean and disinfect the device and its accessories regularly following the instructions provided below CLEANING AND DISINFECTING THE FRAME Clean and disinfect the painted and chromed parts of the seat and base with a soft cloth dipped in a household detergent and disinfectant such as alcohol diluted in water WASHING AND DISINFECTING THE UPHOLSTERY Wash the upholsteries of the accessories 834 ABDUCTION BLOCK 892 REMOVABLE FOOTPLATE COVERING 896 REMOVABLE TRAY COVERING 916 PADDED LEG PANEL with neutral household soap After rinsing dry well with a soft cloth The upholstery of the headrest backrest seat bottom side bolsters with neutral household Soap respecting the following symbols 7 A E machine wash with neutral soap do not bleach iron at low temperature do not tumble dry max 30 C do not spin dry CLEANING AND DRYING THE CORD COVERING Clean the cord with a sponge wet with water and detergent or household disinfectant Dry with a soft cloth or if available such as in a hospital blow dry with compressed air CLEANING THE TRAY Clean Tray 824 with a sponge wet with detergent or household disinfectant After rinsing dry well with a soft cloth CLEANIN
12. THE POMMEL 2 ROTATE THE SIDE BOLSTER DOWNWARDS TO CLOSE THE SIDE BOLSTER JUST LIFT IT TO THE VERTICAL POSITION A CLICK INDICATES IT IS LOCKED 24 41 ADJUSTING THE HEADREST 1 LOOSEN THE CLAMPING LEVER 1 LOOSEN THE THREE CLAMPING LEVERS 2 ADJUST THE HEIGHT OF THE 2 ADJUST THE INCLINATION AND DEPTH OF TIGHTEN THE CLAMPING THE HEADRESTTIGHTEN THE CLAMPING LEVERS CLAMPING LEVER CLAMPING LEVER 7 900000 25 41 o mr aft ADJUSTING THE DEPTH OF THE SEAT 1 UNSCREW THE NUTS AND REMOVE THE SCREWS 2 MOVE THE BACK TO THE DESIRED POSITION 3 INSERT THE SCREWS AND TIGHTEN THE NUTS HOLES TO ADJUST SEAT IN DEPTH cm 36 cm 40 cm 43 HOLES TO ADJUST SEAT IN DEPTH cm 36 cm 40 cm 43 SEAT WIDTH CM 45 SEAT WIDTH CM 50 HOLES TO ADJUST HOLES TO ADJUST SEAT IN DEPTH SEAT IN DEPTH cm 42 cm 42 cm 45 cm 45 cm 47 cm 47 26 41 OROGOA REMOVING THE UPHOLSTERY FOR THE WASHING CLEAN THE PADS OF THE LEGRESTS WITH A SPONGE DO NOT MACHINE WASH 27 41 OROGOA REAR VIEW OF THE BACK BELTS WITH STUDS uw 2
13. WHEELS front or back because it could tip over see fig on page 7 When the SEAT is COMPLETELY TILTED BACKWARDS and the BACK is COMPLETELY RECLINED DO NOT CLIMB OVER OBSTACLES OR STEEP SLOPES that SINCE THEY COULD EXCEED 12 COULD CAUSE THE STROLLER TO TIP OVER SEE FIG PAGE 7 DO NOT USE THE GIUDITTA WHEELCHAIR IN THE SHOWER its steel structure is not suitable for that purpose Contact ORMESA S r l or your retailer for a specific painted aluminium aid made for that purpose DO NOT USE THE PRODUCT IF PARTS ARE MISSING OR DAMAGED Always insist on original replacement parts or the warranty will be void 6 41 Oo 2 F1 G D GI HOW TO TILT THE WHEELCHAIR TO CLIMB UP CURBS CLIMB FACING FORWARD DESCEND FACING BACKWARD 7141 LABELS AND PLATES Name of the model Series number Article number MAX KG Max load LOT code Date of Warning Read the Conformity with the production useand maintenance European safety handbook before use standards THEC MARK CERTIFIES THAT THE GIUDITTA WHEELCHAIR CONFORMS TO THE SAFETY REQUIREMENTS ESTABLISHED BY THE EUROPEAN UNION ESPECIALLY DIRECTIVE 2007 47 CE CONCERNING MEDICAL DEVICES ABOUT THE GIUDITTA WHEELCHAIR Intended use The GIUDITTA wheelchair was designed based on more than twenty five years of experience with the elderly and disabled and is intended for hospital and home use It may be used outside if the warnings and instructions of this man
14. cm front solid swivelling wheels and 30 cm rear wheels drum brakes are engageable with a single control pedal GIUDITTA B12 tilt in space with four 12cm solid swivelling wheels the rear ones with brakes FRAME made of chromed steel painted with non toxic epoxy powder paint Narrow base to facilitate entering elevators Strong semi elastic SEAT and BACKREST in plastic cord gives an excellent comfortable sitting position avoids the user sliding forwards and helps prevent skin brakedown through its breathable qualities SEAT BOTTOM adjustable inclination from 10 to 27 available in four widths 36 40 45 and 50 cm inclined by 10 to prevent the u ser sliding forward HEADREST wide and wrap around padded height adjustable with vertical and front back rotation BACK wide and retentive can be arranged in four positions to vary the depth of the seat bottom SEAT low to facilitate the user getting on and off GAS SPRING for adjusting the inclination of the seat and back The gas spring is a mechanism that supports the patient s weight during adjustments of the back and of the seat tilting with the following advantages a significantly reduces the assistant s effort in raising and lowering b guarantees uniform movement without jerking and avoids unbalancing the patient during adjustment c allows stopping the inclination wherever desired UPHOLSTERY fireproof breathable and removable for machine washing SI
15. d service center in the maintenance of mechanical aids for disabile or directly ORMESA 41 41
16. h brakes even on level ground Always lock the brakes before the user gets in or out of the wheelchair and before making any adjustments The upholstery is fireproof in conformity with the UNI 1021 1 2 standard Nevertheless keep it away from cigarettes matches fireplaces and open flame in general the fire resistant properties of the upholstery are inherent to the fibre and do not depend on treatment with additives Keeping the cushion and patient clean will prevent bedsores 3 41 A ORIGDA GIUDITTA IS A MECHANICAL MEDICAL DEVICE Perform REGULAR MAINTENANCE and CLEANING following the instructions shown in the Maintenance chapter on page 39 40 and HAVE THE DEVICE INSPECTED AT THE INTERVALS INDICATED to VERIFY that it is WORKING PROPERLY and in GOOD CONDITION otherwise warranty will fail and marking will lapse PRODUCT REPAIRS other than the regular maintenance shown on page 39 40 of the manual must be ONLY MADE by a SPECIALIZED SERVICE CENTER in the maintenance of mechanical aids for disables otherwise warranty and C marking will be voided Any CHANGES in the product and the REPLACEMENT WITHOUT ORIGINAL PARTS OR COMPONENTS ARE NOT AUTHORIZED REFER ONLY TO ORMESA otherwise warranty and C marking will be voided In case of DOUBT about the SAFETY of the product or DAMAGE to parts or components you are urged to IMMEDIATELY DISCONTINUE USE and CONTACT a SPECIALIZED SERVICE CENTER in the maintenance
17. of mechanical aids for disables or directly ORMESA 4 41 OROGODA A GUARANTEE ORMESA and INNOVATION IN MOTION warrant the product for 2 years in case of problems contact the retailer where you purchased it Always ask for original spare parts otherwise the guarantee will decline ORMESA will not be liable for damage in the following cases use by an unsuitable person incorrect assembly of parts or accessories unauthorized modifications or service use of other than original replacement parts and parts subject to wear upholstery wheels etc improper use such as transporting objects or loads larger or heavier than those shown in the instruction booklet damage caused by incorrect use and lack of regular maintenance as shown in the instruction booklet exceptional events failure to follow the instructions in this manual THE GUARANTEE DOES NOT COVER WEAR PARTS which are subject to wear and tear such as the upholsteries and the wheels HOW TO STORE AND TRANSPORT THE MEDICAL DEVICE THE DEVICE MUST BE STORED AND PACKED using the Ormesa original packaging materials unless the guarantee will be voided Once unpacked THE TRANSPORT OF THE DEVICE must be done by ANCHORING ADEQUATELY it to the vehicle When travelling by plane or in the car DO NOT SUBJECT THE FOLDED FRAME TO LOADS THAT especially with road bumps COULD DAMAGE ITS STRUCTURE THE DEVICE MUST BE PARKED STORED IN CLOSED AND
18. the instructions in this manual before using the device they will help you use the product safely and keep it in good working order It is an integral part of the product and should be kept for future reference The manual is intended for technically qualified retailers those who use the product and those who assist them it provides instructions for using the product correctly and must be supplemented by adequate knowledge of the rehabilitation program for which it has been prescribed The manual reflects the technical state of the product at the time it was sold ORMESA reserves the right to make any changes to the product or manual suggested by experience technical considerations or regulatory developments without any obligation to update its previous production and relevant manual The GIUDITTA wheelchair may only be used by persons who have read the rules and instructions in this manual The doctor must check that the use of the GIUDITTA wheelchair and its accessories conforms to current laws regulations and standards The wheelchair must be used by persons of the BODY SIZE AND WEIGHT specified in the paragraph TECHNICAL FEATURES on pages 10 and 11 The wheelchair must be guided by persons of suitable height and weight to control its movements Before each use always check that the brakes are working the wheels are not excessively worn and that the headrest back and footrest are locked When pausing always lock bot
19. trests together to form one unit A ASSEMBLING the footrest lock BUSHINGS LOCKING MECHANISM FOR SINGLE FOOTREST 33 41 UNLOCKING the footrest lock LOCKING LEVER LOCKING LEVER 34 41 REMOVABLE FOOTPLATE COVERING 892 ATTENTION IN ORDER TO FIX THE PADDED COVER OF THE FOOTREST IT IS NECESSARY TO FIX THE 914 FOOTREST LOCK C FN VIEW FROM BELOW OF THE FOOTREST FOOTREST LOCK 914 VELCRO 35 41 o r1 G D A PADDED LEG PANEL 916 in alternative to the calf rests 1 REMOVE THE CALF RESTS b T 7714 222 po te 2 1 Ww x N N x 3 2 FIX THE LEG PANEL VN 37 41 o mart REMOVABLE TABLE COVERING 896 ELASTIC 38 41 MAINTENANCE CLEANING AND DISINFECTION REGULAR OR PREVENTIVE MAINTENANCE MONTHLY PERFORM ORDINARY MAINTENANCE OF THE AID AND OF ITS ACCESSORIES REGULAR MAINTENANCE IS REQUIRED TO KEEP THE PRODUCT WORKING PROPERLY AND SAFELY AND IS ESSENTIAL FOR KEEPING THE MARK THE MANUFACTURER IS NOT LIABLE FOR THE PERFORMANCE OF THE PRODUCT UNLESS REGULAR MAINTENANCE IS PERFORMED ATTACHMENT DIRECTIVE 2007 47 CE THE MANUFACTURER ALSO RECOMMENDS THAT THE SUPPLIER OR THE MAINTENANCE TECHNICIAN PERFORMS A COMPLETE REVIEW OF THE PRODUCT S OPERATION AND SAFETY EVE
20. ual are observed especially the paragraphs Warnings on page 3 and 4 Some examples of what not to do with Giuditta on page 6 and Maintenance Cleaning and Disinfection on pages 39 and 40 The aid is intended for those adults who do not have control of their trunk and or that tend to slide on one side or to sit on their coccyx rather than on their gluteus and allows convalescents disabled elderly etc TO REMAIN IN IT FOR EXTENDED PERIODS LYING DOWN AS AN ALTERNATIVE TO STAYING IN BED The conformation and reclining of the backrest the seat tilting and the reclining of the legrests allow the user to be positioned lying down semi lying down or seated while maintaining constant trunk pelvis containment The inclination of the seat the conformation of the backrest triangular and the load bearing padding prevent sliding forward and favour transpiration This arrangement allows the trunk to rest on several points predominantly lateral with respect to the spinal column THE TRUNK IS KEPT PERPENDICULAR TO THE PELVIS without particular mechanical lateral supports or containment belts The NARROW BASE and SWING AWAY allow easy access to lifts or small rooms LOW SEAT and SWING AWAY SIDE SUPPORTS help the user to get on off the chair and allow his easy transfers The HEADREST completes the user s posture 8 41 TECHNICAL FEATURES and MODELS GIUDITTA is available in 2 models GIUDITTA B30 tilt in space with 20
21. yond the lifetime average above Prior to recycling or reassignment an already used Ormesa product it is required that 1 a doctor or therapist verifies that the aid is appropriate and adequate to meet the dimensional functional and postural needs of the new user and if all its components are suitable appropriate for him You should also consider that C marking and the manufacturer s responsibility for safety requirements for the product remain only if the original product still has not changed and only original accessories or spare parts have been applied 2 qualified technical personnel of a company specialized in the maintenance of technical aids for disabled people performs a detailed technical inspection to verify its condition and wear the absence of any damage and failure of all components adjustments the presence of the user s manual of the label with the date and serial number A copy of the manual and maintenance may be always requested to the retailer that supplied the product or directly to Ormesa 3 The product has been thoroughly cleaned and disinfected following the directions given in the MAINTENANCE CLEANING AND DISINFECTION Chapter We recommend you keep written records on all inspections performed on the product before any assignment to the new user In case of doubt about the safety of the product or damage to parts or components you are urged to immediately discontinue use and contact a specialize
Download Pdf Manuals
Related Search