DL150 Series Fixed-Format I/O Unit
Contents
1. 2 This limited warranty does not cover the product if it has been electronically or mechanically modified in any way If the product needs to be modified or adapted in order to comply with applicable technical or safety standards on a national or local level in any country which is not the country for which the product was originally developed and manufactured this modification adaptation shall not be considered a defect in materials or workmanship This limited warranty does not cover any such modification adaptation regardless of whether it was carried out properly or not Under the terms of this limited warranty MUSIC Group shall not be held responsible for any cost resulting from sucha modification adaptation 3 This limited warranty covers only the product hardware It does not cover technical assistance for hardware or software usage and it does not cover any software products whether or not contained in the product Any such software is provided AS IS unless expressly provided for in any enclosed software limited warranty 4 This limited warranty is invalid if the factory applied serial number has been altered or removed from the product 5 Free inspections and maintenance repair work are expressly excluded from this limited warranty in particular if caused by improper handling of the product by the user This also applies to defects caused by normal wear and tear in particular of faders crossfader2. DL150 Series Fixed Format I O Unit User Manual DOCO2 DL150_UM Issue A ji Z DL157 audio system UO psu Ethernet AES50 sudio up ap P AN sat control D MIDAS OL EE EE UK SK e e E I O UNI ee ji DL152 audio system UO psu Ethernet AES50 sudio WS up ap P AN san control x Y MIDAS OL ENGER x E I O UNI j ees eg MEAS DL153 audio system UO control MIDAS OLiSx I O UNIT Ethernet g x Y where ji DL154 audio system UO psu Ethernet AES50 sudio em au ap e Am am control D I MIDAS OL WOO ee gt E I O UNIT JU ees eg mEBAS DL155 audio system UO psu Ethernet AES50 sudio em AN va control x v MIDAS DL gt Skene I O UNI u 2 DL150 Series Fixed Format I O Unit Important EN Instructions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR A A A Terminals marked with this symbol carry electrical current of sufficient magnitude to constitute risk of electric shock Use only high quality commercially available speaker cables with 1 4 TS plugs pre installed All other installation or modification should be performed only by qualified personnel This symbol wherever it appears alerts you to the presence of uninsulated dangerous voltage inside he enclosure voltage that may be sufficient to constitute a risk of shock gt This symbol wherever it appears alerts you to important operating and mai
3. 1 E I elililill s CIE e Ill a N ASSEMBLER QUE ED y DANS UN RACK 2 s KR 2 m bd z ole e e e e e 1 SUPPLY VOLTAGE e e boot 100 240V AC 50 60Hz100w AES3 7 8 AES3 7 8 AES3 5 6 AES3 5 6 AES3 3 4 AES3 3 4 AES3 1 2 AES3 1 2 diagnostics mode 2 The DL150 Series rear panels Showing from top to bottom DL151 DL152 DL153 DL154 DL155 2 Getting Started This section shows you how to unpack install connect up switch on and configure the DL150 Series I O unit This equipment is supplied by a mains voltage that can cause electric shock injury Before installing setting up or operating this equipment make sure that you have read and fully understand all of this section and the Important safety instructions at the front of this manual Refer to additional safety information on the top cover of the unit Unpacking Carefully unpack your DL150 Series I O unit Then inspect the DL150 Series I O unit carefully for any signs of damage that may have occurred during transit and notify the courier immediately if you discover any Check the contents of your DL150 Series I O unit equipment package If there are any parts missing incorrect or faulty please contact your local distributor or MIDAS at the address at the front of this manual User Manual Please retain the original packing in case you should need to return the equipment to the manufacturer or supplier or trans port or ship the unit later
4. 100 240V AC 50 60Hz 100W diagnostics mode Ethernet control rAES50 audion Mmbpaes 2 a2 F n Imtartal CERTIFIED TO Intertek eech DESIGNED ss IN ENGLAND MOUNT IN RACK ONLY AIE g lillilil a g llill a N ASSEMBLER QUE w le DANS UN RACK a i 8 YYA Q e 2 SUPPLY VOLTAGE boot 100 240V AC 50 60Hz 100W diagnostics mode 6 5 aw B B 1 B B i tt B e e e 3 L 8 3 2 1 REH Ethernet control AES50 audio sTo 0065 emm mmm emm mmm S dech de D w eee ee 2 SP N intertek E E 9 E O ei e E ei ei e Ka DESIGNED AND ENGINEERED IN ENGLAND MADE IN CHINA l MOUNT IN RACK ONLY ANE g llla ANNIE N ASSEMBLER QUE NR DANS UN RACK x gt G s z gt a 2000 J A A A SUPPLY VOLTAGE e boot 100 240V AC 50 60Hz 100W diagnostics mode e CONFORMS TO ANSIUL rsr r FK Oe Ethernet control rAES50 audion on z z lt ei maam 28 ab A8 c us a E ec ZC n x E TO e Sms Ss ep lt Intertek See CH DESIGNED ENGINEERED IN ENGLAND e ADE IN CHINA MOUNT IN RACK ONLY T 1 ii 1 I T 11 1 8 T 7 1 it E DIE UE HU N ASSEMBLER QUE T it 11 E 1 1 1 T DANS UN RACK amp eat A A A 2 SUPPLY VOLTAGE boot 100 240V AC 50 60Hz 100W diagnostics mode e 6 mn EE EE x Fee audion c us PU Pu Pus E i y e as ae Ka D EG DESIGNED AND ENGINEERED IN ENGLAND e MADE IN CHINA f j MOUNT IN RACK ONLY 1 W 1 I 1
5. Installation Before installing and operating this equipment make sure it is correctly connected to the protective earth conductor of the mains voltage supply socket outlet through each mains lead Ideally a cool area is preferred away from power distribution equipment or other potential sources of interference Do not install the equipment in places of poor ventilation Do not install this equipment in a location subjected to excessive heat dust or mechanical vibration Allow for adequate venti lation around the equipment making sure that its fans and vents are not obstructed Whenever possible keep the equipment out of direct sunlight Mount in rack only Power The internal power supplies are of the switch mode type that automatically senses the incoming mains voltage and will work where the nominal voltage is in the range 100VAC to 240VAC The correct leads for connection in the area to which the unit was shipped are supplied with the unit The equipment should only be plugged into the mains outlets using the supplied leads Make sure the plug fitted on the supplied mains cable is securely fitted to the mains IEC connector on the unit When fitting or removing a plug always hold the plug itself and never use the cable as this may damage it Never insert or remove an electric plug with wet hands Handling the equipment When lifting or moving the equipment always take its size and weight into consideration Completely isolate
6. at his own expense Important information Changes or modifications to the equipment not expressly approved by MUSIC Group can void the user s authority to use the equipment User Manual 19 I II MUSIC Group Research UK Ltd Klark Industrial Park Walter Nash Road Kidderminster Worcestershire DY11 7HJ England Tel 44 1562 741515 Fax 44 1562 745371 Email mkt info music group com Website www midasconsoles com 2013 MUSIC Group Research UK Limited
7. de e e e e e e gt o SW g Bl g HUF N ASSEMBLER QUE e e e e DANS UN RACK x i 4 D 2 D d d SUPPLY VOLTAGE 100 240V AC 50 60Hz 100W diag 9 10 11 12 13 14 7 I O Card B 8 channel I O card position 8 I O Card A 8 channel I O card position 9 Mains Power Inlet IEC inlet with integral mains switch 10 1 O Card C 8 channel I O card position 11 Diagnostics port 9W D connector for diagnostics use This is not an operator function and is only to be used by service personnel 12 Activate Boot Mode the boot mode switch selects between normal operation and a service personnel only configuration boot mode This is not an operator function and is only to be used by service personnel 13 Ethernet Control Port 1 x rugged Neutrik Ethercon connector with integral status LEDs 14 AES50 Ports 2 x rugged Neutrik Ethercon connectors with integral status LEDs For the I O cards above 7 8 amp 10 each of the DL150 Series will have a different configuration as shown below DL151 e 24 female XLR chassis connectors which provide inputs for mic line equipment Each socket has a red LED that illuminates when 48V phantom power is on for that input DL152 e 24male XLR chassis connectors which provide outputs for line equipment Each socket has a red LED that illuminates when mute is on for that output DL153 e 16 female XLR chassis connectors which provide
8. inputs for mic line equipment Each socket has a red LED that illuminates when 48V phantom power is on for that input e 8 male XLR chassis connectors which provide outputs for line equipment Each socket has a red LED that illuminates when mute is on for that output DL154 e 16 male XLR chassis connectors which provide outputs for line equipment Each socket has a red LED that illuminates when mute is on for that output e 8 female XLR chassis connectors which provide inputs for mic line equipment Each socket has a red LED that illuminates when 48V phantom power is on for that input DL155 e 8male XLR chassis connectors which provide outputs for line equipment Each socket has a red LED that illuminates when mute is on for that output e 8female XLR chassis connectors which provide inputs for mic line equipment Each socket has a red LED that illuminates when 48V phantom power is on for that input e 8 AES3 AES EBU digital inputs and 8 AES3 outputs on XLRF XLRM 12 DL150 Series Fixed Format I O Unit 5 Connectors To ensure the correct and reliable operation of the equipment only high quality balanced screened twisted pair audio cable should be used XLR connector shells should be of metal construction so that they provide a screen when connected to the console snake and where appropriate they should have Pin 1 connected to the cable screen 9 y diagnostics 1 Line
9. output audio connector Female XLR plug and male XLR chassis connector with the following pinouts 1 ground 2 hot and 3 cold 2 Mic line input audio connector Male XLR plug and female XLR chassis connector with the following pinouts 1 ground 2 hot and 3 cold 3 Ethernet socket RJ45 plug and EtherCon socket 4 Diagnostics 9 way D type plug and socket User Manual 13 6 Operation Programming Mode This chapter describes the programming mode of the DL150 Series Fixed Format I O Unit Menu navigation The four programming buttons in the control panel have the following functions Navigation buttons Usage Moves up a menu level Exits programming mode depending on the current menu level Moves down a menu level or selects the current option Scrolls through the current level of menus options Scrolls through the current level of menus options in the opposite direction to the up arrow button The menu flowchart see Menu flowchart options 1 to 4 on page 15 gives an overview of all the menus and their options and shows you how to navigate your way around them In the diagram the menus are shown on the left and each subsequent lower level is to the right Also non flashing options are the ones currently selected To enter exit programming mode To enter programming mode press the MENU button and hold down for approximately two seconds the default display will change to the Main menu di
10. the equipment electrically and disconnect all cables from the equipment before moving it Do not insert your fingers or hands in any gaps or openings on the equipment for example vents Electric fields In accordance with Part 15 of the FCC Rules amp Regulations changes or modifications not expressly approved by the party re sponsible for compliance could void the user s authority to operate the equipment Should this product be used in an electromagnetic field that is amplitude modulated by an audio frequency signal 20Hz to 20kHz the signal to noise ratio may be degraded Degradation of up to 60dB at a frequency corresponding to the modulation signal may be experienced under extreme conditions 3V m 90 modulation Connecting up The DL150 Series uses the following leads and connectors Primary Analogue Inputs Mic Line Inputs Balanced XLR connectors 10K load Primary Analogue Outputs Main Outputs Balanced XLR connectors 50R Source Primary Digital Inputs XLR connectors 110R AES50 Connections Neutrik Ethercons with status indication Ethernet Control Connection Neutrik Ethercon with status indication Diagnostics Connection 9W Female D type connector Power Connections IEC mains inlet 100 240V AC 50 60Hz For further information about the connectors used in conjunction with the DL150 Series see Section 5 Connectors 10 DL150 Series Fixed Format I O Unit 3 Front Panel The fro
11. 4dBu CMRR at 1kHz typical Mic at unity gain gt 60dB Mic at 40dB gain gt 90 dB Noise Mic EIN at 40dB gain 126dBu Output noise at unity gain 86dBu Frequency Response 20Hz 20kHz relative to 1kHz 0 5dB Distortion at 1kHz Input to output 0dB lt 0 01 Crosstalk at 1kHz Channel to channel lt 90 dB Maximum Output Level Line outputs into 600R 21dBu Dynamic Range at 1kHz 22Hz 22kHz at unity gain gt 107dB unweighted 20Hz 20kHz Voltage 100V AC to 240V AC 10 Frequency 50Hz to 60Hz Consumption lt 150W Height Approx 88 1mm 2U Width Approx 482 6mm 19 0 Depth Approx 380mm 15 0 Net Weight Approx 5kg Shipping Weight Approx 6kg Operating temperature range 5 C to 45 C Storage temperature range 20 C to 60 C User Manual 17 8 Service Information This section gives you servicing information for your unit If you are in any doubt or have queries about any of the procedures in this section contact MIDAS Technical Support Contact details can be found at the front of this manual Routine maintenance To help keep your unit in good working order and to make sure it gives you optimum performance we recommend that you adhere to the following maintenance schedules FE Monthly Clean the unit see Cleaning the unit below Yes Check all controls such as pushbuttons for freedom of operation Check the functionality of all controls and indicators such as L
12. E AND OR PROGRAMS the SOFT WARE WITH THE MIDAS OR KLARK TEKNIK CONSOLE OR SIGNAL PROCESSING PRODUCT PRODUCT IN WHICH IT HAS BEEN INSTALLED BY OR FOR WHICH IT IS PROVIDED BY THE COMPANY BY USING THIS PRODUCT YOU WILL BE AGREE ING TO BECOME BOUND BY THE TERMS OF THIS LICENCE IF YOU DO NOT AGREE TO THE TERMS OF THIS LICENCE DO NOT USE THIS PRODUCT AND PROMPTLY RETURN THE PRODUCT TO THE PLACE WHERE YOU OBTAINED IT FOR A FULL REFUND You agree to notify any persons whom you permit to operate this Product of the terms of this Licence and to require them to comply with these terms The Software is licensed not sold to you for use only under the terms of this Licence and the Company reserves all rights not expressly granted to you The Company retains ownership of all copies of the Software itself and all proprietary parts of it including those stored on or in the Product 1 Licence Subject to the terms and conditions of this agreement the Company grants you and other persons you permit to operate the Product a personal limited non exclu sive non transferable licence to use the Software only on the single Product unit in which it has been installed 2 Restrictions a The Software and the accompa nying written materials are copyrighted and contain trade secrets and other proprietary matter including confidential information relating to the specifications and performance characteristics of this Product
13. EDs Check the functionality of the equipment Clean the internal fans see Cleaning the internal fans below Cleaning the unit Switch off the unit and electrically isolate it from the mains before cleaning Clean the unit using a dry lint free cloth Don t use harsh abrasives or solvents Cleaning the internal fans This procedure must be carried out by a fully qualified service engineer The unit s internal fans need to be cleaned regularly to remove the build up of dust dirt etc We recommend that they are cleaned at least once a year provided the unit has been operated under normal conditions However if the operating condi tions are more adverse or extreme for example if the unit is operated in the vicinity of smoke machines new carpets etc this frequency should be increased accordingly Equipment disposal When this equipment has come to the end of it useful life its disposal may come under the DIRECTIVE 2002 96 EC OF THE EU ROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on waste electrical and electronic equipment WEEE Hazardous substances in WEEE contaminate water soil and air and ultimately put at risk our environment and health The direc tive aims to minimize the impacts of WEEE on the environment during their life times and when they become waste The WEEE directive addresses the disposal of products when they have reached the end of their life and contributes to the reduction of waste
14. OU THE LIABILITY OF THE COMPANY FOR ANY CLAIMS ARISING OUT OF THIS LICENCE AND OR BASED UPON THE SOFTWARE REGARDLESS OF THE FORM OF ACTION AND INCLUDING WORK STOPPAGE PRODUCT FAILURE OF MAL FUNCTION OR ANY OTHER COMMERCIAL LOSS OR DAMAGE SHALL NOT EXCEED THE COST OF THE LICENCE FEE FOR THE SOFTWARE OR THE COST OF THIS PRODUCT SUBJECT TO THE PROVISIONS OF APPLICABLE LAW IN NO EVENT SHALL THE COMPANY BE LIABLE FOR ANY LOSS OF DATA LOST OPPOR TUNITY OR PROFITS COST OF COVER OR SPECIAL INCIDEN TAL CONSEQUENTIAL OR INDIRECT DAMAGES EVEN IF YOU ADVISE THE COMPANY OF THE POSSIBILITY OF SUCH DAMAG ES THIS IS A FUNDAMENTAL TERM OF THIS AGREEMENT AND YOU ACKNOWLEDGE THAT THE AMOUNT YOU PAID FOR THE SOFTWARE AND OR THE PRODUCT REFLECTS THIS ALLOCA TION OF RISK NOTHING IN THIS PARAGRAPH PURPORTS TO EXCLUDE OR LIMIT THE COMPANY S LIABILITY FOR DEATH OR PERSONAL INJURY CAUSED BY NEGLIGENCE OR ANY OTHER LIABILITY WHICH CANNOT BE EXCLUDED OR LIMITED BY LAW 5 Other Third Party Computer Programs As re ferred to herein the term Software refers only to proprietary MIDAS or KLARK TEKNIK software owned by the Company that has been provided to you for installation on or already installed in a Product In addition to the Software you may have also been provided at no additional charge with a version of the widely available GNU Linux Operating System which is a modular operating system made up of hundreds of individual softwa
15. Save for such elements as may be licensed to the Company as described in paragraph 5 all rights to copyrights trade marks and trade secrets in the Software or any modifications to it are owned by the Compa ny Unauthorised use or copying of the Company s proprietary Software or any portion thereof or copying of those writ ten materials is prohibited b You may not create market distribute or transfer copies of the Company s proprietary Software or any part of it to others or duplicate rent lease or loan that Software or any part of it except that you may transfer that Software installed in this Product in conjunction with the sale transfer loan rent or lease of this Product and subject at all times to this Licence YOU MAY NOT REVERSE ENGINEER DECOMPILE DISASSEMBLE EXTRACT OR SEPARATE OUT MODIFY ADAPT PORT OR TRANSLATE THE SOFTWARE DERIVE THE SOURCE CODE OF THE SOFTWARE OR CREATE DERIVATIVE WORKS BASED ON THE SOFTWARE OR ANY ACCOMPANYING WRITTEN MATERIALS save as is allowed by licences pertaining to component parts of the Software which are licensed by third parties as described under paragraph 5 or otherwise by law c In the event you violate any term of this Licence all rights granted herein will automatically and immediately terminate and you must stop using the Software and destroy any copies of the Software 3 Limited Warranty Subject to your installation of any Software updates issued by the C
16. TSA HWE uOTSJa HWS NUSW UTE uolqDa as 104 ajqejieae SI 3 SEU 0 s use J J quunu qI JI 455 Z HUSH UTE J202 EUJS 201385 X20012 SoH 2 GE E pumas Sasam Ski ss Bane E JI mau BUTAES 6ur23 s Meet Lasers ce eres PO Sot i D GUINES Er T nuow Spu025 s OM ynoge 104 wg umop pjoYy pue ss id 42012 EUJS d s Jaquinu qI Sun y gI 3y2 I sS 33 1 S 323013 Sa3D se Z payajas aaey no jeu SMOUS jdwex siuL I LINN OI ANTI ST 10 Sharh 3209123 TeUdes uy 323 1 8 3432 3012 SSH u i3s 1 neJj q ieu5Mol nudW 16 DL150 Series Fixed Format I O Unit 7 Technical Specifications This section contains the technical specifications for the DL150 Series Audio System I O units Due to our policy of continual improvement MIDAS reserves the right to alter the function or specification at any time without notice External Connections Primary Analogue Inputs Primary Analogue Outputs Mic Line inputs balanced XLR connectors 10kQ load Main Outputs balanced XLR connectors 500 source Primary Digital Inputs XLR connectors 110R AES50 Connections Neutrik Ethercon with status indication Diagnostic Connection OW female D type connector Power Connections IEC mains inlet 100 240V AC 50 60Hz 10 Maximum Input Level Mic Line at unity gain 21dBu Mic Line at 2 5dB gain 2
17. clock 2 Use the down arrow to select the AES clock source you want for example Ex ternal clock The bottom line will flash to show that this option is not currently selected HES clock select Internal clock AES clock select External clock 3 Press SELECT The bottom line will stop flashing to show that this option has been selected 4 Press MENU 2 Set ID menu Hain menu 1 AES clock This menu lets you set up the network ID of the DL150 Series Fixed Format I O Unit which can be any number from 1 to 18 To set up the ID of the unit 1 In programming mode select menu 2 see To select a menu on page 13 The current ID is shown on the bottom line of the display for example 1 2 Use the down arrow to go to the ID you want for example 7 The ID will flash to indicate that it is not currently selected If you don t want to change the ID number go to the Unchanged option which is between 1 and 18 3 Press SELECT 4 Press MENU 5 To exit programming mode press MENU The default display will now show the newly configured ID number at the end of the bottom line bier ID Select ID T Trying ID r Saving new ID Hain menu z Set ID Main menu 1 AES clock MIDAS BL1isx LINE La UNIT fF 15 User Manual a PlInq OQI urId4 Saf SUEMZIOS p za Ga th Dua UTER Jaquinu qI M U MOUS IM Aeldsip 1 nejJ q PSBuUeLOUy JI 473135 T00 BWAD HO
18. ful consumption of natural resources This will help to reduce pollution and protect the environment and ourselves If this equipment carries a crossed out wheelie bin shown left please do not dispose of WEEE as unsorted mu nicipal waste but collect and dispose of in accordance with local WEEE legislation The horizontal bar underneath indicates that the product was placed on the EU market after 13th August 2005 For WEEE disposal see our website at www midasconsoles com for information 18 DL150 Series Fixed Format I O Unit Other important information EN Important information 1 Register online Please register your new MIDAS equipment right after you purchase it by visiting www midasconsoles com Registering your purchase using our simple online form helps us to process your repair claims more quickly and efficiently Also read the terms and conditions of our warranty if applicable 2 Malfunction Should your MUSIC Group Authorized Reseller not be located in your vicinity you may contact the MUSIC Group Authorized Fulfiller for your country at www midasconsoles com If your country is not listed please contact the United Kingdom MIDAS KT main office located under Service Service Repairs on the www midasconsoles com website Alternatively please submit the online warranty return form found under Service Warranty Registration on www midasconsoles com BEFORE returning the product All enquires mus
19. g The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus 11 Use only attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table e specifled by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Lech TI 13 Unplug this apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped 15 The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection 16 Where the MAINS plug or an appliance coupler is used as the disconnect device the disconnect device shall remain readily operable Legal disclaimer Technical specifications and appearances are subject to change without notice and accuracy is no
20. js TfO UNIT error mMmBDAS DL154 audio system I O psu Ethernet AES50 audio 48V 18V 5V 33V 48V control XY HIDAS GOIS I0 LIT error Tea DL 155 audio system UO psu Ethernet AES50 audio f 18V 18V 5V 33V 48V control ae HIDAS OL 15 EEN I UNIT error S he DL 150 Series front panels 1 Introduction Welcome Thank you for purchasing one of the DL150 Series Audio System I O units The MIDAS DL150 Series Audio System I O units are housed in a rugged 19 2U rack mount chassis with cosmetic trim suitable for use and storage in a road flight case All user interface controls and feedback are located on the front panel User interface controls are laid out for ease of operation with consideration for the amount of user feedback required All switches are high quality momentary type with integral blue LED illumination and printed switch caps All primary connectors are on the rear of the unit All inputs and outputs are on balanced XLR connectors All analogue audio inputs and outputs are tolerant of 48V connection and short circuit protected The DL150 series only use Neutrik XLR connec tions User Manual The DL150 series I O units are mixed technology products combining analogue and digital circuitry These are combined on the input and output cards using multi layer horizontal PCBs Extreme care has been taken when planning and executing the PCB layout to maintain good grounding and analogue digital sepa
21. l and workmanship if used under normal operating conditions for a period of three 3 years from the original date of purchase see the Limited Warranty terms in 4 below unless a longer minimum warranty period is mandated by applicable local laws If the product shows any defects within the specified warranty period and that defect is not excluded under 4 MUSIC Group shall at its discretion either replace or repair the product using suitable new or reconditioned product or parts In case MUSIC Group decides to replace the entire product this limited warranty shall apply to the replacement product for the remaining initial warranty period i e three 3 years or otherwise applicable minimum warranty period from the date of purchase of the original product 3 Upon validation of the warranty claim the repaired or replacement product will be returned to the user freight prepaid by MUSIC Group 4 Warranty claims other than those indicated above are expressly excluded PLEASE RETAIN YOUR SALES RECEIPT IT IS YOUR PROOF OF PURCHASE COVERING YOUR LIMITED WARRANTY THIS LIMITED WARRANTY IS VOID WITHOUT SUCH PROOF OF PURCHASE 2 Online registration Please do remember to register your 3 User Manual new MIDAS equipment right after your purchase at www midasconsoles com and kindly read the terms and conditions of our limited warranty carefully Registering your purchase and equipment with us helps us process your
22. n to hear and decide any dispute concerning it or its formation No breach by you of any provision of this Licence shall be waived or discharged except with the express written consent of the Company and no failure or delay by the Company to exercise any of its rights under this Licence shall operate as a waiver thereof and no single or partial exercise of any such right shall prevent any other or further exercise of that or any other right You acknowledge that the Company could be irrepara bly damaged if the terms of this Licence were not specifically enforced and agree that the Company may seek appropriate equitable remedies with respect to breaches of this Licence including injunctive relief in addition to such other remedies as the Company may otherwise have available to it under applicable laws GNU General Public License GPL For details of the Third Party Software License Attribution Copyright and Terms and Conditions and Notices and the GNU LESSER GENERAL PUBLIC LICENSE see the MIDAS Digital Equipment GNU General Public License GPL Booklet part number DOCO4 GPL DL150 Series Fixed Format I O Unit MIDAS DL150 Series Se m DL151 audio system I O psu Ethernet AES50 audio 18V 148V 5V 33V 48V control x Y HIDAS DU 15 TfO UNIT error MiA DL152 audio system UO AES50 audio ER HIDAS DL1S sk I UNIT an oe DL153 audio system UO psu Ethernet AES50 audio 48V 148V 5V 33V 48V control x Y HIDAS Liss
23. new products directly in online auctions Purchases made through an online auction are on a buyer beware basis Online auction confirmations or sales receipts are not accepted for warranty verification and MUSIC Group will not repair or replace any product purchased through an online auction 5 Warranty transferability This limited warranty is extended exclusively to the original buyer customer of authorized retail dealer and is not transferable to anyone who may subsequently purchase this product No other person retail dealer etc shall be entitled to give any warranty promise on behalf of MUSIC Group 6 Claim for damage Subject only to the operation of mandatory applicable local laws MUSIC Group shall have no liability to the buyer under this warranty for any consequential or indirect loss or damage of any kind In no event shall the liability of MUSIC Group under this limited warranty exceed the invoiced value of the product 7 Limitation of liability This limited warranty is the complete and exclusive warranty between you and MUSIC Group It supersedes all other written or oral communications related to this product MUSIC Group provides no other warranties for this product 8 Other warranty rights and national law 1 This limited warranty does not exclude or limit the buyer s statutory rights as a consumer in any way 2 The limited warranty regulations mentioned herein are applicable u
24. nless they constitute an infringement of applicable mandatory local laws 3 This warranty does not detract from the seller s obligations in regard to any lack of conformity of the product and any hidden defect 9 Amendment Warranty service conditions are subject to change without notice For the latest warranty terms and conditions and additional information regarding MUSIC Groups limited warranty please see complete details online at www midasconsoles com MUSIC Group Macao Commercial Offshore Limited of Rue de Pequim No 202 A Macau Finance Centre 9 J Macau including all MUSIC Group companies DL150 Series Fixed Format I O Unit Licences The following are the license agreements applicable to the MIDAS Digital Equipment End User Licence Agreement for MIDAS and KLARK TEKNIK Software IMPORTANT Please read this document carefully before using this MIDAS or KLARK TEKNIK product This is an agreement governing your use of software or other machine instructions already installed on this MIDAS or KLARK TEKNIK product as well as other software that we provide for installation on this Product The MIDAS or KLARK TEKNIK product will not operate in accordance with its documentation without this software THIS AGREEMENT AGREEMENT OR LICENCE STATES THE TERMS AND CONDITIONS UPON WHICH MIDAS KLARK TEKNIK LIMITED COMPANY OFFERS TO LICENSE THE INSTALLED FIRMWARE SOFTWAR
25. nt panels of the DL150 Series units are all similar and are described here with the DL151 being used for illustration pur poses The individual components are shown in more detail below 1 MIDAS DL1Sx TO UNIT psu Ethernet 18V 148V 5V 3 3V 48V control AES50 audio X Y DEI E O ok K Til ADT 1 Ventilation Grill DO NOT OBSTRUCT 2 PSU Status Indication Power supply status LEDs for each power rail An LED will illuminate when its respective voltage rail is active 3 Ethernet Control Status Green status LED for the Ethernet control port The single green LED has three states of illumination flashing active on connected and off not connected 4 AES50 Status Indication This panel shows the health status of the communications of the AES50 connections If the green ok LED is illuminated communication is good However if the red error LED is illuminated there is a problem on that connection 5 LCD Display 2 x 16 character blue backlit liquid crystal display 6 Configuration Control Menu Select Up and Down buttons for configuring menu items User Manual 11 4 Rear Panel The rear panels of the DL150 Series units are also similar and are described here with the DL153 being used for illustration purposes CONFORMS TO ANSIUL m a Ce S Ethernet control rAES50 audion a Ge e a CERTIFIED TO a ss s me Se H EE c paH AE ANA MOUNT IN RACK ONLY gt 6 ae
26. ntenance instructions in the accompanying literature Please read the manual gt Caution To reduce the risk of electric shock do not remove the top cover or the rear section No user serviceable parts inside Refer servicing to qualified personnel gt Caution To reduce the risk of fire or electric shock do not expose this appliance to rain and moisture The apparatus shall not be exposed to dripping or splashing liquids and no objects filled with liquids such as vases shall be placed on the apparatus gt Caution These service instructions are for use by qualified service personnel only To reduce the risk of electric shock do not perform any servicing other than that contained in the operation instructions Repairs have to be performed by qualified service personnel gt 1 Read these instructions 2 Keep these instructions 3 Heed all warnings 4 Follow all instructions 5 Do not use this apparatus near water 6 Clean only with dry cloth 7 Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding pron
27. o ranging universal switch mode power supply Individual Specifications DL151 e 24 award winning MIDAS analogue mic preamps with switchable 48 V phantom power DL152 e 24 active balanced low impedance line level outputs DL153 e 16 award winning MIDAS analogue mic preamps with switchable 48 V phantom power e 8active balanced low impedance line level outputs DL154 e 16 active balanced low impedance line level outputs e 8 award winning MIDAS analogue mic preamps with switchable 48 V phantom power DL155 e 8 award winning MIDAS analogue mic preamps with switchable 48 V phantom power e 8active balanced low impedance line level outputs e 8 AES3 AES EBU digital inputs and 8 AES3 outputs on XLRF XLRM About this manual This is the operation manual for the DL150 Series Audio System I O units It is intended to help get your unit installed and in operation as quickly as possible by giving you unpacking installation connection setting up and operating instructions To help familiarise you with the DL150 Series there is a description of the front and rear panels along with easy to follow user instructions 8 DL150 Series Fixed Format I O Unit e SN om coniro em 28 E 8 CERTIFIED TO zt EH deii DESIGNED Een IN ENGLAND e MOUNT IN RACK ONLY p n 1 II E g n E p amp UE AE e lu 3 N ASSEMBLER QUE T 7 1 8 ii g 1 1 as w Ri DANS UN RACK 060 i d d SUPPLY VOLTAGE e boot
28. ompany as described herein and the condition below the Company warrants that the Software will operate in compliance with the Software s mate rial specifications and documentation for a period of 90 days from your purchase of this Product The Software is provided as is and the Company does not warrant that the operation of the Software will meet your requirements or operate free from error To the greatest extent permissible by law the Company DISCLAIMS ALL WARRANTIES AND CONDITIONS EITHER EXPRESS OR IMPLIED INCLUDING THE WARRANTIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE NON INFRINGEMENT OF THIRD PARTY RIGHTS OR CAPABILITY OF CORRECTLY PROCESSING PROVIDING AND OR RECEIVING DATE INFORMATION You understand that the Company may update or revise the Software but in so doing incurs no obli gation to furnish such updates to you However the Company may in its discretion make updates available from time to time upon such terms and conditions as it shall determine It is a condition of the above warranty that you install any such Software updates as may be issued from time to time by the Company for the Software in accordance with the Company s instructions and if you do not do so such warranty will cease to apply You may view current Software updates at http www klarkteknik com and http www midasconsoles com 4 Limited Liability THE ENTIRE RISK ARISING OUT OF YOUR USE OR PERFORMANCE OF THE SOFTWARE REMAINS WITH Y
29. ration The DL150 series units use proven technology from the D251 I O unit from the current MIDAS range The analogue input and output cards are identical the AES3 digital card is similar to the one used in the PRO2 surface and the CPU card is a modified version of the one used in the DL251 The user interface software is based on the same menu system currently used on the DL451 and has provision for all of the functions these units can perform Equipped with 24 channels of MIDAS premium mic pre amplifiers with 2 5dB ultra precise gain steps the DL150 Series are the ideal partner to the PRO1 and PROZ digital consoles significantly increasing mixable mic inputs User interface controls and feedback are accessed via an intuitively laid out front panel The controls and LED indicators provide ease of use and instant at a glance feedback All primary connections use high quality balanced XLR connectors Integration Within The MIDAS Product Range Styled to match existing MIDAS console livery MIDAS high performance I O has never been easier or more cost effective Features e 96kHz sample rate operation e Dual AES50 Neutrik etherCON network ports with LED status indicators e All settings programmable from either the front panel controls or console e Remote operation up to 100 m via CAT5 5e cable e PSU status indicator LEDs and configuration LCD display on front panel e Rugged 2U rackmount chassis for durability in portable applications e Aut
30. re components each of which was writ ten and the copyright and other rights in which are owned individually by various parties collectively the GNU Linux Programs Each component has its own applicable end user licence agreement and many of these agreements permit you to copy modify and redistribute the applicable soft ware but you must review the on line documentation that shares a directory or otherwise accompanies each of the GNU Linux Programs provided to you for the specific terms and conditions Nothing in this Licence limits your rights under or grants you rights that supersede the terms of any other applicable end user licence agreement If you wish to receive a computerreadable copy of the source code for any of the GNU Linux Programs that have been provided with your MIDAS or KLARK TEKNIK Product send a cheque or money order no cash accepted your address and 10 00 to cover the cost of optical media postage and handling to MUSIC Group Research UK Limited ATTN Linux Programs CD for MIDAS KLARK TEKNIK Walter Nash Road Kidderminster Worcestershire DY11 7HJ England In your request indicate your Product s name and model number serial number and version release information In your request also indicate the relevant Software version re lease information This offer made pursuant to the GNU Linux Programs end user licence agreements may expire according to the terms of those ag
31. reements in which case your cheque will be returned to you or destroyed at our option Please note that the GNU Linux Programs that may be available to you under this offer consists of the GNU Linux Operating System components only and none of the proprietary application software developed by MIDAS or KLARK TEKNIK is included Other updated Linux distributions containing application soft ware are widely available from a variety of Internet sources User Manual and are often available at minimal or no cost 6 Termination This Licence will terminate immediate ly if you violate any of the Licence terms Upon termination you must discontinue use of the Software and either destroy erase or return to Company all copies of the Software in your possession custody or control including those in or on the Product 7 General This Licence constitutes the entire agree ment between you and the Company with respect to this Software and save in the case of fraud supersedes any other communication including advertising Company reserves all rights not expressly granted to you in this licence If any provision of this Licence is held unenforceable that provision shall be enforced to the maximum extent permissible so as to give effect the intent of this Licence and the remainder of this Licence shall continue in full force and effect This Licence shall be governed by English law and the Courts of England and Wales will have exclusive jurisdictio
32. repair claims quicker and more efficiently Thank you for your cooperation 3 Return materials authorization 1 To obtain warranty service please contact the retailer from whom the equipment was purchased Should your MUSIC Group dealer not be located in your vicinity you may contact the MUSIC Group distributor for your country listed at www midasconsoles com If your country is not listed please contact the United Kingdom MIDAS KT main office located under Service Service Repairs on the www midasconsoles com website Alternatively please submit the online warranty return form found under Service Warranty Registration on www midasconsoles com BEFORE returning the product All enquires must be accompanied by the description of the problem and the serial number of the product The warranty eligibility will be verified from the original sales receipt 2 Subsequently the product must be returned in its original shipping carton together with the return authorization number to the address indicated by MUSIC Group 3 Shipments without freight prepaid will not be accepted S 4 Warranty Exclusions 1 This limited warranty does not cover consumable parts including but not limited to fuses and batteries Where applicable MUSIC Group warrants the valves or meters contained in the product to be free from defects in material and workmanship for a period of ninety 90 days from date of purchase
33. s potentiometers keys buttons guitar strings illuminants and similar parts 6 Damage defects caused by the following conditions are not covered by this limited warranty e Improper handling neglect or failure to operate the unit in compliance with the instructions given in MIDAS user or service manuals e Connection or operation of the unit in any way that does not comply with the technical or safety regulations applicable in the country where the product is used e Damage defects caused by acts of God Nature accident fire flood etc or any other condition that is beyond the control of MUSIC Group 7 Any repair or opening of the unit carried out by unauthorised personnel user included will void the limited warranty 8 If an inspection of the product by MUSIC Group shows that the defect in question is not covered by the limited warranty the inspection costs are payable by the customer 9 Products which do not meet the terms of this limited warranty will be repaired exclusively at the buyer s expense MUSIC Group or its authorized service centre will inform the buyer of any such circumstance If the buyer fails to submit a written repair order within 6 weeks after notification MUSIC Group will return the unit C O D with a separate invoice for freight and packing Such costs will also be invoiced separately when the buyer has sent in a written repair order 10 Authorized MUSIC Group dealers do not sell
34. splay for the first option see display A on page 15 To exit programming mode from any menu display screen press MENU repeatedly until you reach the default screen The unit will exit programming mode automatically after about 20 seconds of inactivity if none of the programming buttons are pressed within that time To select a menu In programming mode scroll to the menu you want by using the up down arrow buttons then press SELECT Menus The four menus in programming mode are as follows 1 AES clock for selecting the method for synchronising the AES50 see 1 AES clock menu below 2 Set ID for setting up the unit s network ID see 2 Set ID menu below 3 CBMA Version for viewing the unit s CBMA version number 4 Software Vers for viewing the unit s software version number In programming mode the four programming buttons in the control panel are used to navigate and select options from a num ber of menus see Menu flowchart on page 15 which let you set up the unit and view information 14 DL150 Series Fixed Format I O Unit 1 AES clock menu This menu lets you set up the clock source of the DL150 Series Fixed Format I O Unit as internal or external for AES synchroni sation To set up the unit s clock source 1 In programming mode select menu 1 see To select a menu on page 13 The current clock source is shown on the bottom line of the display for example Internal
35. t guaranteed MIDAS and KLARK TEKNIK are part of the MUSIC Group music group com All trademarks are the property of their respective owners MUSIC Group accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description photograph or statement contained herein Colours and specifications may vary slightly from product MIDAS products are sold through authorized dealers only Distributors and dealers are not agents of MUSIC Group and have absolutely no authority to bind MUSIC Group by any express or implied undertaking or representation This manual is copyrighted No part of this manual may be reproduced or transmitted in any form or by any means electronic or mechanical including photocopying and recording of any kind for any purpose without the express written permission of MUSIC Group IP Limited ALL RIGHTS RESERVED 2013 MUSIC Group IP Limited Trident Chambers Wickhams Cay P O Box 146 Road Town Tortola British Virgin Islands Limited warranty 1 Warranty 1 This limited warranty is valid only if you purchased the product from a MUSIC Group authorized dealer in the country of purchase A list of authorized dealers can be found on MUSIC Groups website www music group com or you can contact the MUSIC Group office closest to you 2 MUSIC Group warrants the mechanical and electronic components of this product to be free of defects in materia
36. t be accompanied by the description of the problem and the serial number of the product The warranty eligibility will be verified from the original sales receipt 3 Power Connections Before plugging the unit into a power socket please make sure you are using the correct mains voltage for your particular model Faulty fuses must be replaced with fuses of the same type and rating without exception FEDERAL COMMUNICATIONS COMMISSION COMPLIANCE INFORMATION MUSIC Group Research UK Limited C DL150 Series Responsible Party Name MUSIC Group Research UK Limited Address Klark Industrial Park Walter Nash Road Kidderminster Worcestershire DY11 7HJ England Phone Fax No Phone 44 1562 741515 Fax 44 1562 745371 DL150 Series complies with the FCC rules as mentioned in the following paragraph This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference
Download Pdf Manuals
Related Search