ANI-64S-xRU - A
Contents
1. 1 645 Single Section Wall Cabinet INSTRUCTION MANUAL 122 Rose Ln Suite 303 Frisco Texas 75034 FREE 1 877 TOLL 469 362 9228 Email sales a neutronics com A Neutronics com 16 17 18 SAFETY INFORMATION To ensure the best results from this product please read this manual and all other documentation before operating your equipment Retain all documentation for future reference Follow all instructions printed on unit chassis for proper operation To reduce the risk of fire do not spill water or other liquids into or on the unit or operate the unit while standing in liquid Make sure power outlets conform to the power requirements listed on the back of the unit Keep unit protected from rain water and excessive moisture Do not attempt to clean the unit with chemical solvents or aerosol cleaners as this may damage the unit Dust with a clean dry cloth Do not use the unit if the electrical power cord is frayed or broken The power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords and plugs convenience receptacles and the point where they exit from the appliance Do not force switched or external connections in any way They should all connect easily without needing to be forced Always operate th2. MATERIALS PERTAINING THERETO ARE FREE OF DEFECTS OR OTHER HARMFUL COMPONENTS A NEUTRONICS WILL USE ITS REASONABLE EFFORTS TO CORRECT ANY DEFECTS IN THE PRODUCT UPON TIMELY WRITTEN NOTICE FROM YOU NOT TO EXCEED 10 BUSINESS DAYS AFTER RECEIPT BY YOU OF THE PRODUCT BUT YOU AND NOT A NEUTRONICS ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING REPAIR AND CORRECTION THAT WAS CAUSED BY YOU UNLESS OTHERWISE AGREED IN A SEPARATE WRITING BY A NEUTRONICS UNDER NO CIRCUMSTANCES INCLUDING BUT NOT LIMITED TO NEGLIGENCE SHALL A NEUTRONICS BE LIABLE FOR ANY SPECIAL OR CONSEQUENTIAL DAMAGES THAT RESULT FROM THE USE OF OR THE INABILITY TO USE THE PRODUCT IN ACCORDANCE WITH ITS SPECIFICATIONS EVEN IF 5 OR ITS REPRESENTATIVES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES EVENT SHALL A NEUTRONICS S TOTAL LIABILITY TO YOU FROM ALL DAMAGES LOSSES AND CAUSES OF ACTION WHETHER CONTRACT OR OTHERWISE EXCEED THE AMOUNT YOU PAID TO A NEUTRONICS IF ANY FOR THE PRODUCT
3. you and you agree to indemnify and hold harmless A Neutronics Inc from and against any such damage The Product is protected by certain intellectual property rights owned by or licensed to A Neutronics Any intellectual property rights pertaining to the Product are licensed to you by A Neutronics Inc and or its affiliates including any manufacturers or distributors of the Product collectively A Neutronics for your personal use only provided that you do not change or delete any proprietary notices that may be provided with respect to the Product The Product is sold to you and any use of any associated intellectual property is deemed to be licensed to you by A Neutronics for your personal use only A Neutronics does not transfer either the title or the intellectual property rights to the Product and A Neutronics retains full and complete title to the intellectual property rights therein All trademarks and logos are owned by A Neutronics or its licensors and providers of the Product and you may not copy or use them in any manner without the prior written consent of A Neutronics which consent may be withheld at the sole discretion of A Neutronics The functionality and usability of the Product is controlled by A Neutronics Inc from its offices within the State of Texas United States of America A Neutronics makes no representation that materials pertaining to the Product are appropriate or available for use in other locations other than th
4. CK PANEL KNOCK OUT AND MOUNTING HOLE PLACEMENT ANI 64S 12RU 600 23 62 490 19 29 256 85 10 11 307 12 09 1146 5 5 77 00 4 645 1580 600 23 62 490 19 29 307 12 09 146 5 5 77 690 05 27 17 LIMITED WARRANTY PLEASE READ THE FOLLOWING TERMS AND CONDITIONS CAREFULLY BEFORE USING THIS HARDWARE COMPONENTS AND SOFTWARE PROVIDED BY THROUGH OR UNDER A Neutronics INC COLLECTIVELY THE PRODUCT By using installing using the Product you unconditionally signify your agreement to these Terms and Conditions If you do not agree to these Terms and Conditions do not use the Product and return the Product to A Neutronics Inc at the return address set forth on the Product s packing label at your expense A Neutronics Inc may modify these Terms and Conditions at anytime without notice to you Restrictions On Use of the Product It is your responsibility to read and understand the installation and operation instructions both verbal and in writing provided to you with respect to the Product You are authorized to use the Product solely in connection with such instructions Any use of the Product not in accordance with such instructions shall void any warranty pertaining to the Product Any and all damages that may occur in the use of the Product that is not strictly in accordance with such instructions shall be borne by
5. cking front door is removable and reversible The 4 L shaped racking mounting rails are adjustable to any depth and included laser etched markings showing number of rack units We include in each cabinet 20pcs of rack cage nuts and screws 3 sets of keys plastic trim material to keep the knock out edges from scoring the cable and 1 110VAC exhaust fan AVAILABLE MODELS ANI 64S 6RU 6 RACK UNITS LxWxH 24x18x11 5 ANI 64S 9RU 9 RACK UNITS LxWxH 24x18x17 645 12 0 12 RACK UNITS LxWxH 24x18x22 ANI 64S 15RU 15 RACK UNITS LxWxH 24x18x27 SAFETY PRECAUTIONS Please read all instructions before attempting to unpack install or operate this equipment and before connecting the power supply Please keep the following in mind as you unpack and install this equipment e Always follow basic safety precautions to reduce the risk of fire electrical shock and injury to persons e To prevent fire or shock hazard do not expose the unit to rain moisture or install this product near water e Never spill liquid of any kind on or into this product e Never push an object of any kind into this product through any Openings or empty slots in the unit as you may damage parts inside the unit e Do not attach the power supply cabling to building surfaces e Use only the supplied power supply unit PSU Do not use the PSU if it is damaged Do not allow anything to rest th
6. e shipping address you provided with respect thereto You are advised that the Product may be subject to U S export controls Disclaimers and Limitation of Liability A Neutronics may change or modify the Product at any time from time to time THE PRODUCT IS PROVIDED AS IS AND WITHOUT WARRANTIES OF ANY KIND EITHER EXPRESS OR IMPLIED A NEUTRONICS DOES NOT WARRANT OR MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE OF THE PRODUCT S CORRECTNESS ACCURACY RELIABILITY OR OTHERWISE A Neutronics has no duty or policy to update any information or statements pertaining to the Product and therefore such information or statements should not be relied upon as being current as of the date you use the Product Moreover any portion of the materials pertaining to the Product may include technical inaccuracies or typographical errors Changes may be made from time to time without notice with respect to the Product TO THE FULLEST EXTENT PERMISSIBLE PURSUANT TO APPLICABLE LAW A NEUTRONICS DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE AND NON INFRINGEMENT A NEUTRONICS DOES NOT WARRANT THE ACCURACY COMPLETENESS OR USEFULNESS OF ANY INFORMATION WITH RESPECT TO THE PRODUCT A NEUTRONICS DOES NOT WARRANT THAT THE FUNCTIONS PERTAINING TO THE PRODUCT WILL BE ERROR FREE THAT DEFECTS WITH RESPECT TO THE PRODUCT WILL BE CORRECTED OR THAT THE
7. e power cabling or allow weight to be placed upon it or any person walk on it To protect the unit from overheating do not block any vents openings in the unit housing that provide ventilation and allow for sufficient space for air to circulate around the unit DISCLAIMERS The information in this manual has been carefully checked and is believed to be accurate We assume no responsibility for any infringements of patents or other rights of third parties which may result from its use We assume no responsibility for any inaccuracies that may be contained in this document We make no commitment to update or to keep current the information contained in this document We reserve the right to make improvements to this document and or product at any time and without notice COPYRIGHT NOTICE No part of this document may be reproduced transmitted transcribed stored in a retrieval system or any of its part translated into any language or computer file in any form or by any means electronic mechanical magnetic optical chemical manual or otherwise without express written permission and consent Copyright 2015 All Rights Reserved Version 1 5 JAN 2015 TRADEMARK ACKNOWLEDGMENTS All products or service names mentioned in this document may be trademarks of the companies with which they are associated FEATURES amp DIAGRAM FEATURES FULLY ASSEMBLED Welded frame stable structure with preci
8. e unit with the AC ground wire connected to the electrical system ground Precautions should be taken so that the means of grounding of a piece of equipment is not defeated AC voltage must be correct and the same as that printed on the rear of the unit Damage caused by connection to improper AC voltage is not covered by any warranty Turn power off and disconnect unit from AC current before making connections Never hold a power switch the ON position This unit should be installed in a cool dry place away from sources of excessive heat vibration dust moisture and cold Do not use the unit near stoves heat registers radiators or other heat producing devices Do not block fan intake or exhaust ports Do not operate equipment on a surface or in an environment which may impede the normal flow of air around the unit such as a bed rug carpet or completely enclosed rack If the unit is used in an extremely dusty or smoky environment the unit should be periodically blown free of foreign dust and matter To reduce the risk of electric shock do not remove the cover There are no user serviceable parts inside Refer all servicing to qualified service personnel There are no user serviceable parts inside When moving the unit disconnect input ports first then remove the power cable finally disconnect the interconnecting cables to other devices Do not drive the inputs with a signal level greater than that required to d
9. rive equipment to full output The equipment power cord should be unplugged from the outlet when left unused for a long period of time Save the carton and packing material even if the equipment has arrived in good condition Should you ever need to ship the unit use only the original factory packing Service Information Equipment should be serviced by qualifier service personnel when A The power supply cord or the plug has been damaged B Objects have fallen or liquid has been spilled into the equipment C The equipment has been exposed to rain D The equipment does not appear to operate normally or exhibits a marked change in performance E The equipment has been dropped or the enclosure damaged THIS SAFETY INFORMATION IS OF A GENERAL NATURE AND MAY BE SUPERSEDED BY INSTRUCTIONS CONTAINED WITHIN THIS MANUAL TABLE CONTENTS CONTENTS ANI 64S 6RU ANI 64S 9RU 645 12 645 15 INTRODUCTION The Standard Wall Mount cabinet is fully assembled and designed for applications requiring a load capacity up to 130 los The rack exterior is made from heavy duty cold rolled steel leaving nice rounded edges and corners for optimal safety The Standard Wall Mount cabinet features 2 locking side panels providing easy access to mounted equipment Cable knock outs are provided in the top bottom and rear allowing exibility for cable access The powered fan on the top provides heat exhaust to promote proper cooling The lo
10. sion craftsmanship Single section compatible with 19 inch standard equipment Reversible tempered glass front panel with key lock 2 locking removable side panels for easy equipment access Cable entry on the top bottom and rear panel with knock out plate L Shaped mounting profile with adjustable location Single 110V exhaust fan with plug Laser etched rack height markings 20pcs cage nuts and screws Compliant with ANS EIA PS 310 D IEC297 2 DIN41497 PART1 DIN41494 PART7 G B T3047 2 92 Standard SPCC quality cold rolled steel Static loading 130 60kg Degree of protection 20 Powder Coated black finish DIAGRAM FULLY ASSEMBLED 1 Frame Side Panel With Key Lock s Rack Mounting Rail Tempered Glass Front Door with Vented Frame Knock Outs Top Bottom Rear Single 110V Exhaust Fan Edge Protector 29 in 5 SIDE PANEL MOUNTING MOUNTING EDGE ANGLE PROFILE PROTECTOR VIEW OF KNOCK OUT AND MOUNTING HOLE PLACEMENT TOP 600 23 62 450 17 72 BOTTOM 450 17 72 5 ANI 64S 6RU BACK PANEL KNOCK OUT AND MOUNTING HOLE PLACEMENT 600 23 62 490 19 29 307 12 09 ANI 64S 9RU 146 5 5 77 1 600 93 62 290 11 49 490 19 29 423 35 16 67 5 BA
Download Pdf Manuals
Related Search