- PLS Electronics
Contents
1. T use this feature to handle 115V bulbs Choose 120V control curve in the next menu point for those channels With the UP DOWN keys select the output and after press SET Now you can set the maximum level by the UP DOWN keys A star indicated next to the level that the data has been changed Press SET and the level will be stored into the memory and you can select another output or press ESC to exit from this menu without saving you modification If you press ESC after pressing the SET you don t want to adjust more channels the dimmer stores the data and exit from the menu The factory default is 100 for each output 12 PLS Kft www pls hu 4 2 7 Dimmer Curves To select different control curves for each output enter into this menu point With the UP DOWN keys select the output and after press SET Now you can set the control curve by the UP DOWN keys A star indicated next to the level that the data has been changed Press SET and the level will be stored into the memory and you can select another output or press ESC to exit from this menu without saving you modification If you press ESC after pressing the SET you don t want to adjust more channels the dimmer stores the data and exit from the menu The factory default is RMS Linear for each output 4 2 8 Memories Here you can play record and edit dimmer scenes up to 16 memories After enter with the UP DOWN keys select which function you want to enter2. 10 11 12 13 14 output neutrals for channel 7 8 9 10 11 12 respectively on Socket B 7 8 15 16 and the PROTECTIVE EARTH PE side connectors The pin outlet of the 16 pole Harting ILMF type connectors in H2D version is the follows Pin number Function Output phases for channel 1 2 3 4 5 6 respectively on Socket A and 1 3 5 7 9 11 output phases for channel 7 8 9 10 11 12 respectively on Socket B Output neutrals for channel 1 2 3 4 5 6 respectively on Socket A and 2 4 6 8 10 12 output neutrals for channel 7 8 9 10 11 12 respectively on Socket B an ey ae Ome PROTECTIVE EARTH PE the side connectors PLS Kft www pls hu Recommended 16 pole male plug optionally orderable form PLS Male insert HDC HE 16 MT Tension clamp Weidmuller order no 1745840000 ot HDC HE 24 MS Screw connection Weidmuller order no 1207500000 House HDC 16B TOBU 1M25G M25 cable gland Weidmuller order no 1788210000 Outlet of the backside connectors at Pro2 12xx SX dimmer Analay Input Output 7 12 Output 1 6 CAUTION Hever connect or Figure 6 Back part connectors 2x19 pole Socapex type 1 Outputs for the channels 1 to 6 This connector referred in the future as Socket A 2 Outputs for the channels 7 to 12 This connector referred in the future as Socket B 3 Analogue input via 15 pole SUB D male connector optional At B suffixed version of the Pro2 dimmer at this position you can
3. 4 2 8 1 Play Memoties With the UP DOWN keys select a memory what you want to play and press SET With the selected Fade In time the dimmer starts to fade display the memory By pressing the ESC you can fade back from the memory If the HTP is selected in the PRIORITY menu point see three sections later the dimmer continues receiving DMX signal and handle the memory in Highest Takes Precedence priority Otherwise the DMX data receiving is disabled but the LED on the front panel still indicate that the DMX is present or not 4 2 8 2 Edit Memories With the UP DOWN keys select the memory location what you want to edit and press SET After it the stored data is present on the outputs of the dimmer and you can edit it With the UP DOWN keys select the output and press SET to change the value of that output Press the SET to store the set value or press ESC to exit without saving from this menu point Repeat the steps above to adjust the other channels if necessary If the selected memory location is not empty the dimmer prompt you that the location is contain stored data Press Ok to accept it and you overwrite the existing data or press ESC to choose another location 4 2 8 3 Record Memoties With this feature you can store DMX data into the memory Use the UP DOWN keys to select memory location where you want to save the DMX input and press SET 13 PEGASUS PRO2 Digital Dimmer If the selected memory location is not emp
4. C PowerCon and Pro2 12xx WL Wieland ST17 dimmer 14 12 10 8 6 4 fs Anale 3 Input 11 9 7 5 3 1 Figure 2 Back part connectors Schuko CEBEC Swiss Danish and UK BS1363 14 12 10 8 6 4 2 13 15 11 9 7 9 3 1 Figure 3 Back part connectors 16A 3P CEE form 1 12 Outputs of the channels from 1 to 12 13 Mains input cable H07 rubber 5x6mm or 5x10mm without CEE male plug 14 Analogue input via 15 pole SUB D male connector optional At B suffixed version of the Pro2 dimmer at this position you can find the XLR connectors for DMX 15 Additional Protect Earth PE connection point for outputs with M4 nut PLS Kft www pls hu Outlet of the backside connectors of the Pro2 12xx H1 dimmer Pin Layout Analog Input CAUTION o Outputs 3 4 1 Figure 4 Back part connectors 24 pole Harting ILME type 1 Outputs for the channels 1 to 12 2 Analogue input via 15 pole SUB D male connector optional At B suffixed version of the Pro2 dimmer at this position you can find the XLR connectors for DMX 3 Mains input cable H07 rubber 5x6mm or 5x10mm without CEE male plug 4 Additional Protect Earth PE connection point for outputs with M4 nut The pin outlet of 24 pole Harting ILMF type connector is the follows Output phases for channel 1 12 13 24 PROTECTIVE EARTH PE Recommended 24 pole male plug optionally orderable form PLS Male insert HDC HE 24 MT T
5. LL Clear the setting the memories and set back the defaults for the dimmer settings as well Press the SET at the chosen function or press ESC to exit from this menu point 14 PLS Kft www pls hu 4 2 11 Dimmer Settings By pressing the SET button three times within two seconds you enter into the dimmer setting menu point where you can adjust the following preferences 1 User Control Curve For each DMX input data 0 255 you can set output level from 0 100 to give freedom for special control cases 2 If DMX Fails setup Here you can select the Wait Time and the Fade Out time for the If DMX Fails menu point 3 Display Time Here you can select the display backlighting time the lighting time can be infinitely or can be switch off after a specified time 4 Memory Fade Times Here you can specify the Fade In and Fade Out times for the memory play back Technical information Power suppl winnie 1 dunn TN S 3x230V 400VAC 10 3 x 40A or 3x 63A Power draw with open outputs eee 10W Output COMME CLO LS 1 12 x Schuko S 2x 16 pole Harting F H2 2x 19 pole Socapex SX 12 x CEE16 3P C 12 x Neutrik PowerCon 16A PC TAU COMME CLOTS tease na 15 pin SUB D male opt and 5 pole XLR male Noised Uie S isee HF filters at all ch tr 225uS 5 at 12x10A model tr 250uS 5 at 12x13A and 12x16A models Output PLOLECH ONS sissi
6. PEGASUS 22 12 channel Digital Dimmer User s manual Second edition Copyright 2014 PEGASUS PRO2 Digital Dimmer Dear Customer Thank you for chose PLS Electronics product If you have any technical question or you looking for other equipments don t hesitate to take up the contact with our sales representative ot with the manufacturer at the www pls hu web site This apparatus is a twelve channel digital dimmer with DMX 512 1990 or 0 10V control optional with additional control possibilities The light control is produced by a phase angle control technology Safety first Please read carefully and understand the user manual The wrapper of the unit is NOT baby toy Keep it away form babies For technical questions and original spare patts please take up the contact with our sales representative or with the manufacturer at the www pls hu web site ATTENTION A N DON T USE WITHOUT PROTECTIVE GROUND A N Not allowed to make a parallel connection between any outputs phases or neutrals to increase the output current capability of the unit Otherwise the unit can be damaged CAUTION A N Do not cover any air inlets and fan outlets of the dimmer A N Take care to have proper airflow in and out to let cooling the unit CAUTION Disconnect mains before open the dimmer for service Service allowed only for technicians who had technical course by the sales representative or by the manufacturer PL
7. S Kft www pls hu Front parts 1 Phase Module state indicators If it s ON the cotresponding phase unit is working 2 Circuit breakers to protect the outputs 3 These green LEDs show the control level of each channel 4 These yellow LEDs show the output level of each channel 5 DMX control LED If it s flashing the DMX pocket is correct when OFF the DMX pocket is incorrect not present or Analog control optional is on 6 LCD display 7 ENTER button use to enter to the menu select item and confirm the modification of the selected parameter 8 ESCAPE button Use to exit from the menu or discard the modification of the selected parameter 9 UP DOWN buttons use to scroll up down on the menu list or increase the value level of the selected parameter 10 DMX input via male XLR connector 11 DMX throughput via female XLR connector 12 120 Ohm DMX line termination switch Switch it to ON position only if this unit is the last on the DMX line Otherwise left it in OFF position 10 12 11 DMX HAGER HAGER HAGER C134 CIJA HAGER Cila HAGER Cit HAGER CIA HAGER HAGER Cia C14 HAGER Ci3A Figure 1 Handling units of front part PEGASUS PRO2 Digital Dimmer On Figure2 and Figure3 you can find the outlet of the backside connectors of the one output per channel versions like Pro2 12xx S Schuko Pro2 12xx F French Belgian CEBEC Pro2 12xx C CEE16 3 Pro2 12xx P
8. ained service person Take extra care at the installation of the PE Live and Neutral connections The Grey terminals always for LIVE Line voltage Blue ones for the NEUTRAL Green Yellow ones for the Protect Earth Wrongly connected input mains or outputs can damage the dimmer and the loads 2 Installation of the unit After unpacking the apparatus is ready for use Not to make the cable longer If it is short use standard extension Operating with injured cable is perilous PLS Kft www pls hu CAUTION The apparatus is NOT waterproof Protect it from liquids Not to use outdoors without appropriate preventive measures If water or other liquid getting into it dry up and take to technician Working with wet apparatus is PERILOUS The unit has been shipped with 5x6mm 12x10A or 5x10mm 12x13A and 12x16A 7 rubber cable without CEE male plug except screw terminal block type models The correct order of the power cable is the follows Cable color Function Grey Line 1 L1 or R Black Line 2 L2 or S Brown Line 3 L3 or T Blue NEUTRAL N Green Yellow Protect Earth PE CAUTION The manufacturer doesn t responsible if the installer user connect the cable wrongly The guaranty will be void if the connection order is wrong and the unit can damage too Before powert up always control the right connection of the Lines Neutral and the Protect Earth Consult with the manufacturer or with trained se
9. en ire C10A C13A or C16A circuit breakers 1P 1P N ot 2P depends on the model Taput leateisisdre ade entre TVS opto and power isolation on DMX input the throughput is not isolated and refreshed OPENS TeM Perales sssrinin 10 C to 35 C RH 0 90 non condensing SLOLAQE CNPT UE eaa n 10 C to 60 C Dineo ONS ea a 484 x 132 x 350 connectors DCI E ANAE EN A EE EEA 18Kg 15 Declaration of Conformity We PLS Electronics Limited declare under sole responsibility that the product Product NAIC h engsnurenens eaii Pegasus PRO2 12 channel dimmer series Product model output variationS S Schuko C 12 x 3 pole 16A CEE F CEBEC PC 12 x PowerCon H1 24 pole Harting 2H1 2x24 pole Harting H2 2 x 16 pole Harting 2H2 4 x 16 pole Harting SX 2 x 19 pole Socapex 25SX 4 x 19 pole Socapex STB Screw terminal blocks input outputs Serial Numbet cccccccccescccceeencceeeeees n a DU eren ANE n a Item 0 11 One to which this declaration relates 15 in conformity with the following standards e EN 55015 1 Electromagnetic compatibility Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment CISPR 15 2000 CISPR 15 2000 A1 2001 CISPR 15 2000 A2 2003 e EN 61000 6 2 Immunity for industrial environments e EN 60439 1 Low voltage switchgear and contro
10. ension clamp Weidmuller order no 1745850000 ot HDC HE 24 MS Screw connection Weidmuller order no 1211100000 House HDC 24B TOBU 1M25G M25 cable gland Weidmuller order no 1787820000 ot HDC 24B TOBU 1M32G M32 cable gland Weidmuller order no 1787810000 PEGASUS PRO2 Digital Dimmer Outlet of the backside connectors of the Pro2 12xx H2 and Pro2 12xx H2D dimmer Pin Layout Anala Input Output 7 12 chae fies Output 1 6 Mot allowed to make parallel onmactons between ony p 10565 or neutrals djever connect or disconnect under load 4 5 2 1 Figure 5 Back part connectors 2x16 pole Harting ILME type 1 Outputs for the channels 1 to 6 This connector referred in the future as SocketA 2 Outputs for the channels 7 to 12 This connector referred in the future as SocketB 3 Analogue input via 15 pole SUB D male connector optional At B suffixed version of the Pro2 dimmer at this position you can find the XLR connectors for DMX 4 Mains input cable H07 rubber 5x6mm or 5x10mm without CEE male plug 5 Additional Protect Earth PE connection point for outputs with M4 nut The pin outlet of 16 pole Harting ILMF type connectors in H2 version is the follows 1 2 3 4 5 6 Output phases for channel 1 2 3 4 5 6 respectively on Socket A and output phases for channel 7 8 9 10 11 12 respectively on Socket B Output neutrals for channel 1 2 3 4 5 6 respectively at Socket B and 9
11. find the XLR connectors for DMX 4 Mains input cable H07 rubber 5x6mm or 5x10mm without CEE male plug 5 Additional Protect Earth PE connection point for outputs with M4 nut The pin outlet of 19 pole Socapex type connectors is the follows Output phases for channel 1 2 3 4 5 6 respectively on Socket A and 1 3 5 7 9 1 output phases for channel 7 8 9 10 11 12 respectively on Socket B Output neutrals for channel 1 2 3 4 5 6 respectively on Socket A and 2 4 6 8 10 12 output neutrals for channel 7 8 9 10 11 12 respectively on Socket B 13 14 15 1617 18 19 PROTECTIVE EARTH PE Recommended male plug optionally orderable form PLS Male inline plug P19 LM S M40A solderable for cable OD 16 28mm PEGASUS PRO2 Digital Dimmer Outlet of the backside connectors at Pro2 12xx STB dimmer Mot allowec 3 between any 1 LL l T m amp 4 2 1 Figure 7 Back part connectors Sctew terminal block input outputs 1 Outputs for the channels 1 to 6 Max wire cross section is 4mm 2 Outputs for the channels 7 to 12 Max wire cross section is 4mm 3 Analogue input via 15 pole SUB D male connector optional At B suffixed version of the Pro2 dimmer at this position you can find the XLR connectors for DMX 4 Mains input Max wire cross section is 6mm 12x10A or 10mm 12x13A and 12x16A CAUTION Installation of this dimmer version needs a tr
12. lgear assemblies Part 1 Type tested and partially type tested assemblies Therefore the upper indicated product qualifies the EU 73 23 EWG LV directive and the 89 33 EWG EMC directive considering 93 465 EWG directive for CE Place of issue Signature of authorised person Szekesfehervar HUNGARY Date of issue 01 03 2014 7 y Pcie Vass Managing Director of PLS Ltd PLS Kft H 8000 Szekesfehervar Gozmalom utca 22 HUNGARY Tel 36 22 789 589 Fax 36 22 382 783 E Mail info pls huWeb www pls hu
13. menu point you can set the global start address of the dimmer from the set address the dimmer receives twelve DMX data and control the outputs from 1 to 12 Use the UP DOWN keys to change the address from 001 to 512 To save the setting press SET otherwise press ESC to go back into the menu list If the dimmer is in softpatch mode you have to disable it before you select global DMX address For it the dimmer ask back when you go into this menu point To disable the softpatch press SET after this question displayed The factory default is 001 4 2 2 Test the outputs of the dimmer After entering this menu you have to select the testing way blinking the output blinks on off in each 1sec or steady the output in stable Press SET for selection and now you can select with UP DOWN keys which channel you want to test from 1 to 12 Press SET to modify the light output level by the UP DOWN keys to choose another output press SET again Press ESC to exit from this menu 11 PEGASUS PRO2 Digital Dimmer 4 2 3 Chaser The dimmer has 9 preprogrammed non modify able scenes chaser effects After enter to this menu select with the UP DOWN keys which chaser you want to play on the output The first three are fix light outputs 30 60 and 100 for each channel the last 6 are running chasers Press SET after selection and the chaser now present on the outputs To modify the light level grand master use the UP DOWN keys To select an
14. nk For the analog control cable use a 14 core wire with shield The cable will be the shortest as possible The connector type is the SUB D 15 pin female with house 4 Digital Control 4 1 DMX input The DMX input signal must be connect to the DMX In 11 marked connector which can be found on the front side of the unit If this unit 15 the last one on the DMX network chain you must take the termination switch on the front panel to Term On position on the font panel Otherwise left it at the other position 555 in Pin Function Pin 2 Number Pin 3 ins 4 SSD NE pna Spare Data NC Table 1 Functions of XLR pins Figure 5 Outlet of the connectors front view the male connectors in the upper line The DMX input of the dimmer is power and opto isolated Not recommended to connect the Pin 1 to the Protect Earth PE The DMX Throughput is not isolated from the DMX input and not refreshed 10 PLS Kft www pls hu 4 2 Menu specification After pressing the SET button on the dimmer you can reach the following menu points use UP DOWN keys to scroll on the menu list 1 Start Address 2 Test Outputs 3 Run Chaser 4 DMX Patch 5 Dimmer Curves 6 Dimmer Preheats 7 Dimmer MaxLevel 8 Memories 9 If DMX Fails 10 Factory Defaults 11 Dimmer Settings To enter to the selected menu press the SET button again otherwise press the ESC to go back the standby display 4 2 1 Start address set In this
15. other chaser press SET to exit from the menu press ESC 4 2 4 DMX Softpatch You can select different DMX addresses for each output in this menu First with the UP DOWN keys select the output after press the SET and now select the DMX address for that channel Press the SET to chose another output and repeat the steps described before To exit from this menu press the ESC Here the dimmer asks back to enable this settings If you want to enable press SET otherwise ESC If you choose SET the global DMX address which selected in the first menu point is now disabled If you select ESC the selected addresses are stored but not enabled the global DMX address is enabled 4 2 5 Dimmer PreHeat To give preheat level for output enter into this menu point With the UP DOWN keys select the output and after press SET Now you can set the preheat level by the UP DOWN keys A star indicated next to the level that the data has been changed Press SET and the level will be stored into the memory and you can select another output or press ESC to exit from this menu without saving you modification If you press ESC after pressing the SET you don t want to adjust more channels the dimmer stores the data and exit from the menu The factory default is 0 for each output 4 2 6 Dimmer MaxLevels To set limitation for the output level enter into this menu point Here actually the adjusted level limits the DMX input value to the selected level DON
16. rvice person if you need help in installation The unit is able to control 12x10A 12x13A or 12x16A depends on the dimmer model The input L1 L2 and L3 lines are connected to the channels as the follow 1 4 channel to Phase L1 5 8 channel to Phase L2 9 12 channel to Phase L3 If necessary the dimmer can be powered from only one phase L1 L2 and L3 inputs are powered from the same phase Please consider that in this case the maximum input power is change like this 12 x 10A model 1 x 40Amps 12 x 13A model 1 x 52Amps 12 x 164 model 1 x 63Amps These are the absolute maximum ratings A N If you overdrive the dimmer can DAMAGE A N PEGASUS PRO2 Digital Dimmer 3 Analog control optional The functions of the SUB D connector pins are in the following table The Pin 13 is an optional fix 10V PinN Function 1 12 Channel IN Iomax D0mA output With this output and twelve FIX 10V Output potmeters you can make a very simple control board to Ouse this dimmer The control board doesn t need any other 14 Analog mode enable input connect it to GND power supply Use 10K to 100K Linear type potmeters If you don t want to use pin 13 leave it UNCONNECTED The pin 14 must be connected to GND to enable the analog control Just connect the pin 14 to the pin 15 While the analog control is enabled the dimmer doesn t receive any data from the DMX line and the display and the DMX LED are bla
17. ty the dimmer prompt you that the location is contain stored data Press Ok to accept it and you overwrite the existing data or press ESC to choose another location 4 2 8 4 Priority of Memories If you want to add the DMX input data with the memory at playing chose with the UP DOWN keys the HTP highest takes precedence Otherwise select No DMX to disable the DMX input while memory playing is in progress 4 2 9 If DMX Fails Here you can set how the dimmer react if the DMX signal is fails You can choose from the following possibilities 1 Keep DMX value the dimmer keep the output levels infinitely till a new valid DMX pocket not arrive 2 Fade Out with the selected wait and fade out time the dimmer fade back to zero level after DMX data fails you can set it in the Dimmer Settings menu section 3 Play memory The dimmer plays the selected memory location if the DMX fails You can set after pressing the SET button by the UP DOWN keys Press SET to store the selected memory number and ESC to exit to the main menu After change of these setting you have to restart the dimmer disconnect reconnect to have effect for the next DMX fail 4 2 10 Factory defaults To store back the factory settings you can choose from three alternatives by the UP DOWN keys 1 Clear Settings DMX addressing softpatch PreHeat and Maximum levels Control curves 2 Clear Mem Clear only the stored memories not modify the other settings 3 Clear A
Download Pdf Manuals
Related Search