Manual edaMove - movisens GmbH
Contents
1. Configuration Interval 1 second Duration 10 minutes Start time 10 09 2012 at 11 13 13 Close This application shows information about sensor hardware sensor state and sensor configuration 16 Before you start a measurement please check the charging status of the battery The maximum measurement duration can only be reached when the battery is fully charged To start ameasurement do the following steps Step 1 In the sensor manager software click on the Start Recording button in the lower left ofthe window v You can see the following window Measurement configuration x Measurement duration 13 Days oJ Hours 0 Minutes Start time Start measurement immediately C Start measurement at the specified time Date 10 09 2012 Time 10 35 Step 2 Please supply the following information into the text fields O Measurement duration The maximum measurement duration depends on the manufacturer configuration of your sensor O Start time You can start the measurement immediately or delayed at a specific time If you want to start your measurement delayed please specify date and time The given time should not be more than 2 days from now 3 Start the measurement by clicking the Start button v You will see the following window 17 movisens SensorManager Remove sensor 1 5 xj The recording was started Please remove the sensor from the USB port Please follow the instruction2. your measurements should be stored To do this click the button after the text field e Type in the ID of the measurement If you want to use date and time in the ID click the button after the text input field e All other information is optional If the measurement data shall be further processed with the movisens DataAnalyzer the additional information is mandatory 5 Finally click on Save data The measurement data will be stored in the Unisens format Unisens is an open data format for multi sensor data You can find further information about Unisens here www unisens org v The software confirms the end of data storing process The following window is shown x 2 How do you want to continue Open destination Folder Show data Analyze data You can now directly show the stored data The measurement will be shown in the UnisensViewer If you have installed the movisens DataAnalyzer you can directly start data analysis and generate reports be clicking on Analyze data You can find more information in the DataAnalyzer manual 22 7 7 Viewing measurement data To view recorded measurements click on Show data directly after the string process To view previously stored measurements use the Windows Explorer to navigate to your measurements folder and then open the folder with the desired ID Then double click on the unisens xml file The measurement will then be shown in the UnisensViewer ln A
3. 3 A iaiia 1 Welcome Dear customer Thank you for choosing the EDA electrodermal activity and physical activity Sensor edaMove from movisens With this sensor you get the newest technology for mobile monitoring of psycho physiological parameters in everyday life Please read this manual completely and thoroughly before bringing the measurement system into service In his manual you will find all Information relevant to the use and maintenance of the measurement system as well as for solving problems If you have any further questions don t hesitate to call us It is our pleasure to help you Phone 49 721 381344 0 2 Scope of application edaMove is a scientific research instrument to capture the EDA electrodermal activity and the physical activity of a person and other secondary parameters derivable from these measurement signals edaMove is designed and tailored for the use in research applications The EDA and activity sensor edaMove is not a medical device The sensor acquires a single channel EDA signal using two Ag AgCl electrodes In addition to this the sensor is measuring acceleration in three dimensions air pressure and ambient temperature The edaMove uses the exosomatic measurement method where an external DC voltage of 0 5V is applied to the skin to acquire skin conductance The configuration of the sensor is done from PC by means of the software included in this package edaMove allows the mea
4. 3V Accumulator voltage 2 7 4 2 V Number of charging cycles 300 with 1C 1C gt 80 Maximum recording capacity 2 weeks depending on manufacturer configuration Battery run time recording Bluetooth off 1 5 days Size of sensor WxHxD Internal sensor 62 3mm x 38 6mm x 10 5mm EDA Amplifier Exosomatic method DC 0 5V Resolution 14bit Input range 2uS up to100uS Bandwith DC to 8Hz Output rate 32Hz 3D acceleration sensor Measurement range 8 g Noise 4 mg Output rate 64 Hz Pressure sensor Measurement range 300 1100 hPa Noise 0 03 hPa Output rate 1 Hz Indicators LED 3 color operation and charging status Vibrating alert start and end of measurement 27 Interfaces Micro USB Bluetooth Environmental conditions 28 Temperature 20 C to 60 C 0 C to 45 C during charging Humidity 0 to 75 RH relative humidity Atmospheric pressure 300 to 1100 hPa absolute 10 Legal Notes 10 1 Copyright The software that comes with the Move 3 sensor is protected by copyright Renting exchanging broadcasting duplication or copies are not permitted N 3 0 2 Disclaimer The material in this manual is for informational purposes only The products it describes are subject to change without prior notice movisens makes no representations or warranties with respect to this manual or with respect to the products described
5. cht Pug e 10 Sekunden Tag Aere n d Kompresmon de J v a Minute Wache Physikakschen Wert runden e Stunde Aes Nach Einheiten Sample Point Linea ale Due gruppiert and Hold Y Fodenivese schie en analysieren movisens also offers analyzing your data and generating reports according to your needs as a service If you have any further questions please do not hesitate to contact us 23 8 Maintenance and proper disposal 8 1 Maintenance Besides charging the batteries the ecgMove sensor does not need any further maintenance The battery capacity will decrease slowly with charging cycles and age The battery can only be changed by movisens Please contact us in the case when a replacement is necessary 8 2 Cleaning instructions Ifyou want to clean the ekgMove sensor please note the following e Disconnect the sensor from chest belt electrode patch adapter or cradle e Usea soft slightly moistened cloth e Take care that no humidity enters the sensor housing 8 3 Cleaning the electrodes To clean the electrodes please consider the following e Don t touch the electrode area with sharp objects e Use cotton swabs to clean the electrode area and to remove old electrode gel 25 The Move Il is subject to the EU directive WEEE Waste Electrical and Electronic Equipment Please consider your local regulations for waste disposal 26 9 Technical Data Power supply Lithium lon battery Supply voltage
6. e help of the push buttons at the cradle Please make sure that the 4 contacts are connected marked red in the picture E KONG v After connecting the sensor to a USB port the charging process starts immediately During charging the status LED is blinking blue If the sensor is fully charged the LED is blinking green If the sensor is deeply discharged e g after a long period where it was not used it can take up to several minutes until the sensor reacts and can be identified by the computer 7 2 Preparing a measurement Before conducting a measurement please make sure you installed the software as described in chapter 6 1 15 Step 1 Start the movisens SensorManager by selecting Windows Startmenu gt movisens SensorManager gt SensorManager v SensorManager is now searching for available sensors EA movisens SensorManager 1 5 10079 Searching sensor JE xj Searching sensor Please connect a sensor to the usb port Step 2 Connect the edaMove sensor with your PC using the cradle v The software will automatically detect the device and open the following window 21x SS Physiologische Parameter intelligent messen MOVISENS Sensor information Sensor type ekgMove acc 64 Hz ecg 256 Hz bpmlist nnList press 8 Hz temp 1 Hz Serial number 00459 Firmware revision 10062 Status Size of recorded Data D Measuremet Duration 0 seconds Battery status charging 54
7. ed above Step 1 Plug the USB drive into the USB port of your PC The content of the medium will be shown If the window does not open automatically select the appropriate drive from the window My computer Step 2 Double click the file movisens_SensorManager_Setup_Full exe 13 v The Installation runs automatically in the background After successfull installation shortcuts are created in the Windows Start Menu under the entry movisens SensorManager Double click the file UnisensViewer_Setup_Full exe v The Installation runs automatically in the background After successfull installation a shortcut UnisensViewer is created in the Windows Start Menu You need an internet connection to make an update Select Windows Start Menu gt movisens SensorManager gt Updater and respectively Windows Start Menu gt UnisensViewer gt Updater If a new version is available it will be downloaded and installed automatically The software can be uninstalled with the Windows Control Panel 14 7 Handling This chapter describes how to prepare a measurement and how to attach the sensor to a test person Furthermore you get information to save delete and analyze data from the sensor m the Sensor 7 1 Charging Step 1 Connect the cradle with the USB cable to a USB port USB port of your computer or another port that conforms to USB standard like USB hub or USB charger Attach the sensor with th
8. edaMove Mobile EDA and Physical Activity Sensor User Manual movisens Imprint User manual edaMove Version 02 04 2014 movisens GmbH Fritz Erler Stra e 1 3 76133 Karlsruhe Germany Phone 49 721 381344 0 Fax 49 721 381344 90 Internet www movisens com E Mail support movisens com Copyright movisens GmbH Contents A nee nen n senesansnnsinssen sh nnneee 1 2 Scope of application 3 3 Instructions of Use 5 4 Scope of delivery and accessories 7 4 1 Scope of delivery esses 4 2 ee 8 5 Description of the sensor mssessesserssrssersseesssersserssersserssersssessserssserssersse 9 6 Software Installation ee 13 6 1 System Requirements see 13 6 2 Installing the software 6 3 Updating the software 6 4 Uninstalling the Software ENEE 14 AAA 7 1 Charging the Sensor 7 2 Preparing MEaSUrement assessessessrssessesssssssnsennsessessensensensensensensensensensensenseneer 15 73 Starting a measurement umrserssersersservsrsssrsserssessrsserssersersseesersserssesserssesverssessseener 17 74 Attaching the Sensor to the test personn 18 75 Stopping a measurement ENEE 20 7 6 Storing measurement data ENEE 20 77 Viewing measurement data 23 8 Maintenance and proper disposal EEN 25 8 1 En Elei E 25 82 Cleaning li del 8 3 Cleaning the electrodes 8 4 Proper disposa ar 9 TechnicalDald cd o Le 27 10 Legal Notes 10 15 Copyright mente 10 2 Disclaimer 10
9. ensor is connectedtoaPCora Flashing green The sensor is connected to a PC ora Flashing blue charger The battery is actually being charged The battery is flat sensor will turn off three times per soon second charger The battery is fully charged Flashing blue fast Flashing Red fast three times per second An error occurred Please contact the manufacturer No LED active The sensor is inactive Combination of red blinking and green blinking as well as red blinking and blue blinking are possible whit the appropriate combination of the above described meanings The edaMove sensor features a vibration alarm to signal the beginning and the end of a measurement 10 11 6 Software Installation This chapter describes how to install and uninstall the software and how to update it Beside this the system requirements are defined 6 1 System Requirements Before installing the software please check if the following system requirements are fulfilled e PC with Windows XP or higher e Administrator rights during installation e A minimum of 300 MB free space on hard disc The delivered software consists of two programs e SensorManager Program to configure the sensor to start a measurement and to download the data from the sensor e UnisensViewer Program to view the stored data 6 2 Ins tallir Ng the s SO yf twa are Please ensure that your PC fulfills the requirements describ
10. figured measurement duration has passed A running measurement will also be stopped when e The sensor is connect to a PC e The end of the battery run time has been reached To store recorded measurement data on the PC do the following steps Start the SensorManager by selecting Windows Start menu gt movisens SensorManager gt SensorManager Remove the edaMove sensor and the electrodes from the test person and connect the sensor to the PC using the cradle v After the SensorManager has detected the connected sensor the following windows will be shown 20 novisens SensorManager 10079 Physiologische Parameter intelligent messen MOVISENS Sensor information Sensor type ekgMove acc 64 Hz ecg 256 Hz bpmList nnList press 8 Hz temp 1 Hz Serial number 00459 Firmware revision 9992 Status Size of recorded Data 60489 kB Measuremet Duration 1 day Battery status charging 4 Configuration Interval 1 second Duration 1 day Start time 23 07 2012 at 14 58 00 Start Recording Save Data Close Click on Save Data v You will see the following window x Base folder Jeimeasurements SCS fed Measurement id 2012 07 23 14 58 00 1001 fed Name or subject id ba o Age fe Years Weight fo kg Height f am Gender H Sensor location chest E Comment After intervention 21 Please type in the following information e Select the base folder where
11. herein movisens shall not be liable for any damages losses costs or expenses direct indirect or incidental consequential or special arising out of or related to the use of this material or the products described herein The activity sensor Move Il is no medical device and is not intended to be used for medical purposes 1f gt Tranamoartlc 10 3 Trademar ks Windows and Windows XP are registered trademarks of Microsoft Corporation 29 movisens GmbH Tel 49 721 381344 0 Fax 49 721 381 344 90 Fritz Erler Str 1 3 info movisens com 76133 Karlsruhe http www movisens com Germany
12. order number in the following paragraph To use the sensor a computer is needed in addition to the scope of delivery 4 1 Scope of delivery The following components are included in delivery Article Order No EDA and Activity Sensor edaMove Cradle with Micro USB Interface Wrist band Mirco USB Cable SensorManager Software 10102 The following accessories can be ordered optionally Article Order No Wrist band TBD Cradle with Micro USB Interface 30105 Micro USB Cable 30102 Bluetooth Dongle 30103 Micro USB Charger for 110 240V 30100 USB Hub 7 Ports 30101 5 Description of the sensor edaMove is equipped with Ag AgCI electrodes for high quality recordings of electrodermal activity The sensor can be attached to the wrist and the electrodes can be placed on the palm of a hand F movisens KN Included in the delivery you also get a cradle with micro a USB interface To connect the sensor to a PC you have to remove the sensor and the electrodes from the test person and plug it into the cradle The axes of the integrated acceleration sensor are defined as described in the following figure The edaMove sensor is equipped with a multi colored LED to show the status of the sensor Status LED Flashing red once per second Meaning The sensor is active and records data Flashing red slowly every two seconds Delayed recording active The s
13. s and remove the sensor from the cradle v The status LED will flash red once per second as soon as the measurement has started and data will be recorded If a delayed start was configured the LED flashes red every two seconds until the measurement starts IK If you reconnect the sensor after starting a measurement again with a PC the measurement will be stopped prematurely Activation of recording xj A The measurement will be started If you reconnect the sensor to a pc during measurement the measurement will prematurely be terminated IK If you connect the sensor to an USB charger the measurement won t be stopped That means you can extend the measurement duration by intermediately charging the sensor during a measurement rhinn tha tachin g tne person Step 1 Make sure that the electrodes are clean und free from old oo gel Make also sure that the edges of the electrodes are free from grease Step2 Attach the adhesive rings to the electrode Degrease the skin of the test person Fill electrode gel into the electrode and remove 18 excess gel with a plain object Remove the protective foil from the adhesive ring and place the electrodes onto the clean skin area 3 Attach the sensor with the wristband Make sure that the sensor is never connected to the cradle as long as the electrodes are attached to the test person 19 The measurement will automatically be stopped ifthe con
14. surement and in conjunction with movisens DataAnalyzer the analysis of the following parameters e Skin conductance e Skin conductance level O Many features of skin conductance responses e Acceleration in three dimensions O Air pressure and temperature e Movement Acceleration and Step Count e Activity Classes and Body Position e Energy Expenditure Tip On demand other parameters could be calculated from raw data by movisens 3 Instructions of Use eo to LK to LK to LK edaMove is not a medical device Only use ekgMove for the designated applications Never connected the sensor to the cradle as long as the electrodes are attached to the test person Never open edaMove The battery of the ekgMove may only be changed by manufacturer edaMove is not waterproof Don t use edaMove in wet environment Only use the edaMove under the specified conditions To charge the battery of the sensor only use USB standard compatible devices If there are any problems by using the electrodes or the wrist band or any other physical problems e g pressure marks skin irritations itching redness of skin hypersensitivity or other discomfort please stop using the product immediately 4 Scope of delivery and accessories In this chapter you come to know which parts are within the scope of delivery and what is available as accessories All ofthese parts could be reordered Please consider the
Download Pdf Manuals
Related Search