MicroBar User Manual
Contents
1. Nochine ready Brower out GROUNDS DRAWER OUT Grounds drawer out of place Keys delivering coffee based Insert the grounds drawer into OF PLACE drinks are blocked its special slot Should this alarm turn on during the delivery of a coffee based drink up until brewing the alarm is displayed but the drink will be delivered after brewing the cycle in progress will be suspend ed The coffee cycle will recom mence only when the drawer has been put back in its place Nochin ready Drawer aut Should this alarm turn on during the group movement phase the movement will be inter rupted When the drawer is back in its place the reset group will be repeated FRONT PANEL POSITION Front panel open The machine functions are Close the front panel Machine Off Front Panel Open m Z 7 I N nuova simonelli DISPLAY CAUSE EFFECT SOLUTION NOTE WASHING CYCLE The set number of cycles pro The message will appear on Do a washing cycle see para IS NEEDED grammed before washing has the display but the machine graph WASHING THE DELI been exceeded will continue to deliver drinks MER UNIT AND MILK FOA Clean Warning WASHING THE MILK The set number of hours pro The message will appear on Perform a washing cycle for CIRCUIT IS NEEDED grammed from time of last the display but the machine the milk foamer only As in the milk based drink before was will continue to deliver dri2. To make this proceed as for CAFFELATTE see CAFFELATTE paragraph The display will read Decaffeinated 6 8 HOT MILK Press the key corresponding to the desired kind of coffee following the procedure of the paragraph HOW TO MAKE THE COFFEE The coffee is being made To make this proceed as for CAFFELATTE see CAFFELATTE paragraph N nuova simonelli The display will read 6 11 HOT WATER 6 12 sTEAM Decaffeinated Espresso Before proceeding with the following opera During steam delivery never touch the tions ensure that the water tank has water steam pipe with any part of you body or in it If it hasn t proceed to filling it with place your hands underneath it Keep the Leave the cup beneath the nozzles until the water Not be used for pots of Tea steam pipe inclined downwards on the grid message on the display disappears where the cup is positioned This provides delivery of hot water for brewing tea chamomile tea or herb teas Position a suitable container a cup under the Steam pipe Hot water pipe Press the Steam delivery key once Press the hot water delivery key once This allows the delivery of steam to emulsify milk and to heat other liquids 6 10 HOW TO MAKE SHORT ESPRESSO AND CAFE CREME Residual water will drip from the steam pipe and as soon as the steam starts being deli vered use it for the desired time The display will read
3. ZZ Fig 24 The coffee is being made According to the kind of coffee selected the display will read 2 Espresso 2 Coffees Leave the 2 cups beneath the nozzles until the messages on the display disappear 6 5 HOWTO MAKE CAFFELATTE Position a milk container next to the machi ne Insert the milk suctioning tube inside the milk container Position the cup Adjust the tap along the tube to regulate the amount of milk desired Press the caffe latte delivery key once The caffe latte is being made N nuova simonelli 6 9 HOW TO MAKE DECAF FEINATED COFFEE Open the ground coffee conveyor hatch A Pour only ground coffee into the coffee bean holder Any other kind of coffee will damage the coffee grinder The display will read as follows WARNING Lasciare la tazza sotto gli erogatori fino a quando non scompaiono le scritte sul dis play Don t put caramelized sugar coated or similarly coated coffee beans or instant m coffee or other sugary beverages because 6 6 HOW TO MAKE they will harm the appliance Q CAPPUCCINO BIG CAPPUCCINO ZI nsert only 1 dose of decaffeinated ground coffee To make this proceed as for CAFFELATTE see CAFFELATTE paragraph 6 7 MACCHIATO three layers milk coffee milk ZI p
4. KEYBOARD DESCRIPTION Standard configuration TO o EHe o EHO o CHO o LEGENDA 1 Espresso key 2 Espressos key 1 Coffee key 2 Coffees key Decaffeinated coffee key 1 Caffe Creme key Coffee version 1 Caffelatte key Cappuccino version Hot water key Steam key LCD display O OO 4 O O OP WD 32 MicroBar 1 2 MICROBAR INTERNAL DESCRIPTION LEGENDA 1 Ground coffee conveyor 2 Coffee bean holder 3 Coffee grinder adjusting screw PA 4 Delivery unit 5 Water collecting tray 6 Coffee grounds drawer 7 Milk Foamer Cappuccino version only 8 9 1 Milk Foamer air regulator Cappuccino version only PA Door key 0 Door microswitch Fig 3 N nuova simonelli 2 SAFETY INSTRUCTIONS RISK OF POLLUTION This book is an integral and essential part of the product and must be given to the user Read this book carefully It provides important information concerning safety of installation use and maintenance Save it carefully for future reference gt gt After unpacking make sure the appliance is complete In case of doubts do not use the appliance but consult a qualified technician Packaging items which are poten tially dangerous plastic bags polystyrene foam nails etc must be kept out of children s reach and must not be disposed of in the environ ment 35 Before connecting the appliance make sure the rating plate data corre spon
5. 47 RESETTING MACHINE PARAMETRES 47 HANDLING MANUAL COFFEE DELIVERY GROUP 47 CLEANING AND MAINTENANCE 48 SWITCHING OFF THE MACHINE 48 CLEANING THE BODY 48 CLEANING THE DELIVERY UNIT AND THE MILK FOAMER 22000000 n 48 REINSTATING AN INTERRUPTED WASHING CYCLE 49 COFFEE HOLDER AND COFFEE DELIVERY UNIT CLEANING 49 CLEANING THE STEAM NOZZLE 50 CLEANING THE DROP COLLECTING TRAY GRID 50 CLEANING THE WATER COLLECTING TRAY 50 CLEANING THE WATER TANK 50 CLEANING THE GASKET 50 CLEANING THE MILK FOAMER 51 STANDARD SETTING TABLE 52 MACHINE FUNCTIONS MESSAGES 53 MACHINE BLOCK ALARM MESSAGES 55 ELECTRICAL SYSTEM 57 PLUMBING SYSTEM 58 fSjnuova simonelli 1 DESCRIPTION m 2 o ae LEGENDA 7 Coffee nozzles 12 Milk flow adjusting tap 1 Coffee bean holder cap 8 Milk Cappuccino nozzle Cappuccino version only 2 Control panel Cappuccino version only 13 Water tank opening 3 Front door 9 Control panel hatch opening locking key 14 Main switch ON OFF 4 Steam pipe Hot water pipe 10 Ground coffee conveyor hatch 15 Mains connecting plug Drop collecting tray grid 11 Milk suction tube 16 Water collecting tray 6 Coffee grounds drawer Cappuccino version only fSjnuova l simonelli
6. TAMPING Press the ENTER key to access the sub menu This allows you to program the coffee tamping for each drink YES or NO Tamping Ristretto Tamping 2 Ristretto Tamping Espresso Tamping 2 Espresso Tamping Coffee Tamping 2 Coffee Tamping CoffeeCreme Tamping caffellatte Tamping Macchiato Tamping Cappuccino Tamping Big Cappuccino cO ON OOF The arrow keys AV confirm disconfirm the tamping function for each drink Press the RESET key to exit the submenu and go back to the main menu and to confirm the tamping programmed m 2 9 o T I 2 m 2 TT l simonelli Press the ENTER key to scroll all the items on the submenu and see confirmation of the tam ping programmed 8 GROUNDS NUMBER Press the ENTER key to access the sub menu This allows you to program the GROUNDS NUMBER When the number has been reached a message will be dis played instructing you to empty the coffee grounds drawer and the machine will stop working to allow the procedure to be done safely The arrow keys AW increase decrease the grounds number to proceed to the emptying of the coffee grounds drawer Press the RESET key to exit the submenu and go back to the main menu and to confirm the grounds number programmed The ENTER key is disabled 9 MILK CLEAN WARN H Press the ENTER key to access the sub menu This allows you to program after how many hours following the last
7. 3 3 1 MACHINE IDENTIFICATION Always quote the machine serial number in all communications to the manufacturer Nuova Simonelli 3 2 TRANSPORT The machine is transported on pallets which also contain other machines all boxed and secured to the pallet with supports Prior to carrying out any transport or handling operation the operator must put on work gloves and protective footwear as well as a set of overalls which must be elasticated at the wrists and ankles The pallet must be transported using a sui table means for lifting e g forklift 36 TRANSPORT AND HANDLING 3 3 HANDLING A CAUTION RISK OF IMPACT OR CRASHING During all handling operations the operator must ensure that there are no persons objects or property in the handling area The pallet must be slowly raised to a height of 30 cm 11 8 in and moved to the loading area After first ensuring that there are no persons objects or property loading opera tions can be carried out Upon arrival at the destination and after ensuring that there are no persons objects or property in the unloading area the pro per lifting equipment e g forklift should be used to lower the pallet to the ground and then to move it at approx 30 cm 11 8 in from ground level to the storage area CAUTION A RISK OF IMPACT OR CRASHING Before carrying out the following operation the load must be checked to ensure that it is in the corr
8. as follows example To make these proceed as for Espresso Coffee see the paragraph HOW TO MAKE THE COFFEE Press the STEAM delivery key once again to stop the delivery of steam SS rg27 IMPORTANT At the end of every steam deli very carefully clean the tube The display will read the following message with a damp cloth Machine Ready When the desired amount of hot water has been delivered press the hot water delivery key again to stop the delivery of hot water 42 MicroBor PROGRAMMING 7 1 LEGENDA WicroBor o ENTER key to enter menus 2 CURSOR keys scrolling menus increasing decrea 4 sing values 3 RESET key to exit menus LIST OF PROGRAMMABLE FUNCTIONS pur CUMULATIVE TOTAL PRODUCT NAME WATER VOLUME GRIND TIME MILK TIME PRE BREWING TAMPING GROUNDS NUMBER 9 MILK CLEAN WARN H 10 CLEAN WARNING 11 GROUP SETTING 12 GRINDER SETTING 13 COFFEE TEMPERAT 14 STEAM TEMPERAT 15 WATER FILTER L This operation should be realized by an Expert Technician ONLY Adjustement carried out by NON Certified Technichians or other per sons may invalidate the Warranty N nuova simonelli 7 2 PROGRAMMING For accessing the programming sites proceed as follows NOTE can be performed with machine on Insert the key into the appropriate lock Turn the control panel hatch key counter clo
9. milk deli very the milk foamer cleaning warning will be displayed The arrow keys AW increase decrease the amount of hours for the display of the milk foa mer cleaning warning message Press the RESET key to exit the submenu and go back to the main menu and to confirm the number of hours programmed The ENTER key is disabled 10 CLEAN WARNING Press the ENTER key to access the sub menu 46 MicroBar This allows you to program the number of cycles after which the group clean war ning will be displayed The arrow keys AW increase decrease the amount of hours for the display of the group clean warning message Press the RESET key to exit the submenu and go back to the main menu and to confirm the number of cycles programmed The ENTER key is disabled 11 GROUP SETTING Press the ENTER key to access the sub menu This allows you to program the group repositioning The arrow keys AW increase decrease the riascent of the motor Press the RESET key to exit the submenu and go back to the main menu and to confirm the programming The ENTER key is disabled 12 GRINDER SETTING Press the ENTER key to access the sub menu This allow you to program the choice of increasing grinding times by o 5 seconds every 50 250 deliveries By setting the program at 0 the function is disabled The arrow keys AW increase decrease the number of deliveries after which there will be an increase in grinding time The available v
10. will not be delivered Substitute the broken probe This alarm blocks MALFUNCTION ALARM probes is broken deliveries I 2 2 Lu Al AllarmSteanTemp COFFEE QUANTITY Too much coffee Coffee will not be delivered Reduce the quantity of coffee This alarm will not halt ALARM and an ejection cycle will be delivery The cleaning fil effected ter alarm can be elimina ted by programming the 1 number of litres to zero Too Much Coffee 0f 56 MicroBar
11. 2 2 Lu N nuova simonelli 6 2 SELECTIONS CONFIGURATION Set the desired function on keyboard keys n 1 2 3 4 6 see DISPLAY chapter by following the programming procedures see Chapter on Programming Keys 1 2 can correspond only to coffee beve rages keys 2 4 6 can correspond to all bevera ges Then apply the corresponding label supplied LEGENDA Selection configurations Big Cappuccino 1 Cafe Creme 2 Cafe Creme 40 6 3 HOW TO MAKE THE COFFEE The procedure for making espresso and long espresso is the same 4 Position cup under the nozzles The beverages always flow from both nozz les The coffee is being made mE According to the kind of coffee selected the display will read Espresso Coffee Leave the cup beneath the nozzles until the messages on the display disappear NOTE The nozzles can be adjusted to fit all kinds of cups Position the nozzles carefully in such a way as to limit the space between cup and nozzles al ia 6 4 HOW TO MAKE TWO COFFEES Position one cup under each nozzle
12. IDENTIFICATION 36 TRANSPORT 525 36 HANDLING 36 INSTALLATION AND PRELIMINARY OPERATIONS 37 ADJUSTMENTS TO BE MADE BY A QUALIFIED TECHNICIAN 38 GRINDING ADJUSTMENT 38 MILK FOAMER ADJUSTMENT 38 MILK FLOW ADJUSTMENT 39 USE oy CRI RR 39 STANDARD CONFIGURATION 39 SELECTION CONFIGURATION 40 HOW TO MAKE COFFEE 40 HOW TO MAKE 2 COFFEES 40 HOW TO MAKE CAFFELATTE 41 HOW TO MAKE CAPPUCCINO BIG CAPPUCCINO 41 MACCHIATO 3 layers milk coffee milk 41 HOT MILK 212 RR 41 HOW TO MAKE DECAFFEINATED COFFEE 41 HOW TO MAKE SHORT ESPRESSO AFFE CREME iiie tv cae ew ewe 2 ER 42 HOT WATER LR RR 42 STEAM 42 PROGRAMMING 43 LEGENDA ii xxxkkb REX dae eee eee eee wees ee 8 43 PROGRAMMING 43 EXITING PROGRAMMING 44 PROGRAMMING CYCLE 44 8 1 8 2 8 3 8 4 9 1 9 2 9 3 9 4 9 5 9 6 9 7 9 8 9 9 9 10 9 11 10 11 12 SPECIAL MACHINE SCALING FUNCTIONS 47 RESETTING CLEANING FILTRE LITRE COUNTER 47 RESETTING WASHING CYCLES
13. ULATIVE TOTAL The submenus can be entered by pus hing the ENTER key The quantity of doses delivered for each kind of beverage will be displayed Total Ristretto Total 2 Ristretto Total Espresso Total 2 Espresso Total Cafee Total 2 Cafee Total Cafecream Total Latte 9 Total Caffelatte 10 Total Macchiato 11 Total Cappuccino 12 Total Big Cappuccino 13 Total Deca 14 Total Cleaning 15 Total Litres CONDO The arrow keys scroll the totals of the various beverages The RESET key moves back to the preceding menu Per azzerare i conteggi premere contempora neamente i tasti AV The display will read Counters reset 2 PRODUCT NAME By pressing the ENTER key the subme nus can be accessed beverage is assigned to each key Example Product Name Espresso In this case the beverage Espresso is assi gned to key number 1 The arrow keys AW scroll the names of the beverages on each key available in the agenda The RESET key is for exiting the submenu The ENTER key confirms the type of beverage for the key number being taken into considera tion and then passes on to the beverage of the next key The programmable keys are the following COGO GO CO Q2 Once the programming of the final key has been completed you pass on to the next menu item NOTA The keys 2 4 can be programmed for both milk based and coffee drinks The keys can be programmed exclusiv
14. W 6 USE ADJUSTMENT Before starting usage of the appliance the ope 6 1 STANDARD rator must read and fully understand the safety CONFIGURATION instructions in this handbook KEYS LEGENDA START UP pressing the ON OFF key Standard Configuration the machine will begin to carry out a self diagnostic check at the end of which if the machi ne is cold this cycle may last U as long as 3 minutes the dis play will read NOTE the procedure is possible also with the appliance on Machine Ready To adjust both the flow and the temperature of the milk delivery turn the adjusting tap as fol lows 1 Decaffeinated Coffee Cafe creme Turn the milk suction tap N Coffee version CLOCKWISE COUNTER CLOCKWISE to n the event that malt me nohs OF break Caffelatte INCREASE DECREASE the milk suction downs are shown after the self diagnosis Cappuccino version and then DECREASE INCREASE operation call the technical assistance cen Turn the tap until the milk reaches the desi tre The operator must not intervene red temperature SWITCHING Hot water Steam OFF By pressing and holding IMPORTANT Keys 1 2 3 4 6 see DIS down the ON OFF key the PLAY description can corre machine and the display will spond to different drinks switch off according to taste and local traditions see PROGRAM MING and paragraph on SELECTIONS CONFIGURA TION MicroBor 39 I
15. alues are 0 50 100 150 200 250 Press the RESET key to exit the submenu and go back to the main menu and to confirm the number of deliveries programmed The ENTER key is disabled 13 COFFEE TEMPERAT Press the ENTER key to access the sub menu This allow you to program the temperatu re of the coffee heater The arrow keys AW increase decrease the temperature of the coffee heater Press the RESET key to exit the submenu and go back to the main menu and to confirm the temperature programmed The ENTER key is disabled 14 STEAM TEMPERAT Premendo il tasto ENTER possibile entrare nel sottomenu This allow you to program the temperatu re of the steam boiler The arrow keys AW increase decrease the temperature of the steam boiler Press the RESET key to exit the submenu and go back to the main menu and to confirm the temperature programmed The ENTER key is disabled 15 WATER FILTER Press the ENTER key to access the sub menu This allows you to program the number of litres of water to be delivered for the dis play of the message clean water filter The arrow keys AW increase decrease the number of litres of water delivered for the dis play of the message clean water filter Press the RESET key to exit the submenu and go back to the main menu and to confirm the number of litres programmed The ENTER key is disabled 8 8 1 RESETTING THE CLEA NING FILTER LITRE COUNTER This function allows you t
16. ck and refill the level of water in the water tank The machine is equipped to wash the delivery unit with detergent tablets and the milk circuit with liquid cleansers Cappuccino version only The machine will begin a wash cycle that con sists of hot water deliveries alternated with pau ses The whole cycle lasts approximately 4 minutes We recommend that you carry out a WAS HING CYCLE at least once a day using spe cial cleansers CAUTION RISK OF INTOXICATION We remind you not to interrupt a washing cycle using detergent tablets once started otherwise detergent residues may remain inside the machine In order to execute the washing procedure pro ceed as follows for coffee version go directly to step 4 1 Position a container with water beside the machine 2 Putthe suction tube inside it 3 Add the specific cleaning product 20 ml 0 005 Gal of Puly Milk 4 Press the following key Ay nuova Simonelli 9 Keep pressing down on the key for about 5 Afterwards the rinsing procedure will begin 9 5 COFFEE HOLDER AND seconds until the display reads and the display will read COFFEE DELIVERY UNIT CLEANING Clean CAUTION Insert Cleanser _ RISK OF BURNS OR SCALDING 6 Open the ground coffee conveyor hatch Reposition a container only with water in it Set the machine to the O energy level 7 Insert the cleanser tablet puly Caff and P uM Insert the key in the lock close
17. ckwise Open the control panel hatch the display will read Machine Uff Front Panel Press the ENTER key close the front panel the display will read Please Wait Heat ing Once the ejection cycle is over the unit will enter resting phase position and the display will show the first item on the programming menu Cumulative Total KEY FUNCTIONS Scrolling function list Programmable and or decreasing increasing values ENTER To enter menus submenus and con firming data RESET Moving back to preceding level KJ nuova simonelli 7 3 EXITING PROGRAMMING To exit programming sites proceed as follows NOTE can be performed with machine on and from any of the visualized functions Insert the key into the appropriate lock Turn the control panel hatch key counter clockwise Open the control panel hatch the display will read ak o M 2 TT Machine Uff Front Panel Open Close the front panel and turn the key clock wise The display will read Please llait Heat ing e The unit will enter resting phase position and the display will read Machine Ready The machine is now ready to deliver the desired beverages with its new memorized setting Alternatively scroll all the functions by pushing the arrow keys W until the dis play reads Machine Ready 44 MicroBar 7 4 PROGRAMMING CYCLE 1 CUM
18. d with the mains This plate is on the front panel at the top right hand side of the appliance The appliance must be installed by quali fied technicians in accordance with current standards and manufacture r s instructions The manufacturer is not liable for any damage caused due to failure to ground the system For the electrical safety of the appliance it is neces sary to equip the system with the pro per grounding This must be carried out by a qualified electrician who must ensure that the electric power of the system is sufficient to absorb the maximum power input stated on the plate Fig 5 In particular you must ensure that the size of the wiring cables is sufficient to absorb power input The use of adapters multiple sockets or extensions is strictly forbidden If they prove necessary call a fully qualified electrician The machine must be installed accor ding to the local standards in force with regard to plumbing systems For this reason the plumbing connec tions must be carried out by a quali fied technician This appliance must only be used as described in this handbook The manufacturer shall not be liable for any damage caused due to improper incorrect and unreasonable use m 2 o T nuova l simonelli Basic rules must be observed when using any electric appliance e do not leave the appliance expo sed to atmospheric agents rain sun etc do not let t
19. ect position and that when the supports are cut it will not fall The operator who must first put on work gloves and protective footwear will pro ceed to cut the supports and to storing the product To carry out this operation the technical characteristics of the product must be consulted in order to know the weight of the machine and to store it accor dingly RISK OF POLLUTION A CAUTION RISK OF POLLUTION Do not dispose of packaging in the environ ment Before carrying out any installation and adjustment operations you must read and fully understand the SAFETY INSTRUC TIONS of this handbook The company cannot be held responsible for damage to things or injury to persons caused by failure to comply with the safety instructions and installation and maintenan ce instructions contained in this handbook CAUTION RISK OF SHORT CIRCUITS Before connecting the machine to the mains power supply please check that the supply voltage corresponds to the machine voltage Once the machine has been withdrawn from the packaging carry out the following instruc tions 1 Position the unit on a horizontal surface 2 Open the hatch 3 Withdraw the water tank by pulling it upwards LH 4 Particularly the first time wash the tank with soapy water and then carefully rinse off all soap 5 Fill the water tank with water 6 Make sure that the outside of the water tank is dry 7 Retu
20. ely for cof fee drinks 3 WATER VOLUME CC By pressing the ENTER key the subme nus can be accessed The doses of water to be used for each single drink can be programmed Water volume cc Ristretto Water volume cc 2 Ristretto Water volume cc Espresso Water volume cc 2 Espresso Water volume cc Coffee Water volume cc 2 Coffee Water volume cc CoffeCreme Water volume cc caffelatte Water volume cc macchiato 10 Water volume cc Cappuccino 11 Water volume cc Big Cappuccino 12 Water volume sec Tea 1 9 Co co The arrow keys AW increase decrease the amount of water used to make the desired drink Press the RESET key to exit the submenu and go back to the main menu and to confirm the dose programming Press the ENTER key to scroll all the items on the submenu and see confirmation of the dose programmed 4 GRIND TIME Press the ENTER key to access the sub menu The grinding times of each drink can be programmed sec Grind Time Ristretto Grind Time 2 Ristretto Grind Time Espresso Grind Time 2 Epresso Grind Time Coffee Grind Time 2 Coffee Grind Time CoffeCreme Grind Time Caffellatte Grind Time s Macchiato 1 9 095 10 Grind Time s Cappuccino 11 Grind Time s Big Cappuccino The arrow keys AV allow you to increase decrease the grinding time needed for making the selected drink Press the RESET key to exit the submenu and go back to the main menu and to confirm the grind
21. he appliance be used by children unauthorised staff or staff who have not read and fully understood the contents of this handbook Before servicing the appliance the authorised technician must first switch off the appliance and remove the plug In particular do not touch the appliance when hands or feet are wet CAUTION RISK OF ELECTRIC SHOCK A 2 2 TT Fig 6 do not use the appliance when barefoot do not use extensions in bath or shower rooms do not pull the supply cord out of the socket to disconnect it from the mains gt gt To clean the appliance set the machine to the 0 energy level that is WITH THE MACHINE SWITCHED OFF AND THE PLUG REMOVED FROM THE MAINS and follow the instructions in this handbook IEN If the appliance breaks down or fails to work properly switch it off Any intervention is strictly forbidden Contact qualified experts only Repairs should only be made by the manufacturer or authorized service centres Only original spare parts must be used Failure to observe the above could make the appliance unsafe gt gt For installation the qualified electri cian must fit an omnipolar switch in accordance with the safety regula tions in force and with 3 0 12 or more mm in between contacts To avoid dangerous overheating make sure the supply cord is fully uncoiled Do not obstruct the extraction and or dissipato
22. ing time set Press the ENTER key to scroll all the items on the submenu and see confirmation of the set grinding time 5 MILK TIME Press the ENTER key to access the sub menu This allows you to program the milk deli very time Latte Caffellatte Macchiato Cappuccino Big Cappuccino WwW The arrow keys AW allow you to increase decrease the delivery time and the dose of the milk to be used to make the selec ted drink Press the RESET key to exit the submenu and go back to the main menu and to confirm the grinding time set Press the ENTER key to scroll all the items on the submenu and see confirmation of the set grinding time 6 PRE BREWING Press the ENTER key to access the sub menu This allows you to program the choice of coffee pre brewing for each drink YES or NO N nuova simonelli Pre Brewing Ristretto Pre Brewing 2 Ristretto Pre Brewing Espresso Pre Brewing 2 Espresso Pre Brewing Coffee Pre Brewing 2 Coffee Pre Brewing CoffeeCreme Pre Brewing caffellatte Pre Brewing Macchiato Pre Brewing Cappuccino Pre Brewing Big Cappuccino 1 92 con The arrow keys AW confirm disconfirm the pre brewing function Press the RESET key to exit the submenu and go back to the main menu and to confirm the pre brewing choice programmed Press the ENTER key to scroll all the items on the submenu and see confirmation of the pre brewing choice programmed 7
23. isable to wash the milk foamer by fis hing the milk suction tube in hot water rather than in milk To reassemble proceed inversely attaching the milk foamer tubes properly MicroBar 51 N nuova simonelli 10 STANDARD SETTING TABLE BEVERAGE WATER VOLUME GRINDING TIME MILK TIME PRE BREWING TAMPING sec L gems 8 1 1 8 2Ristretto 80 48 12 1 No se iti 2 Espresso 1006 1 105 9 No No cafe 7 No Ys S o So 12073 105 JA S No No Cecene Qi 8 1 20afeCrem 2001221 12 No No cano op 1 1 2 Ne Ys Cappuccino 806 7 __ No Late Grounds number l O Mikdeaingwamng Gleanwanng Caffee temperature 98 208 L E M 125 257 F 00 Water filter Crinder setting I e 2 TT 52 MicroBar N nuova simonelli 11 MACHINE FUNCTIONS MESSAGES DISPLAY CAUSE EFFECT SOLUTION NOTE GROUNDS DRAWER FULL Grounds drawer full The Keys delivering coffee based Pull out the grounds drawer number of coffee grounds are blocked and empty it into a garbage the drawer has reached the bag Put the drawer back into number set during program place when the display reads Hach ine ready ming stage Drawer full
24. nks case of a complete washing Ihing has been exceeded cycle you m 3 the key iibi m pressed down for ul KC leaniarning seconds without however inserting cleanser tablets for this group s washing See only points 1 2 3 4 of the paragraph WASHING THE DELIVERY UNIT AND MILK FOAMER I 2 l 2 TT 54 MicroBor N nuova simonelli 12 MACHINE BLOCK ALARM MESSAGES DISPLAY CAUSE EFFECT SOLUTION NOTE UPPER PISTON MOTOR During the group handling The control unit will halt wha Open and close the machine If the reappears GROUP ALARM phase the upper piston tever cycle is on by turning off after the second time of exceeded maximum set time the movement actuator taying call the Service by 10 seconds before recogni and those for drink delivery Technician zing motor pickup the operator will not be able to make selections on the key board AMM Group Error HEATER FILLING The heater filling stage machine will stop ALARM exceeded the 3 minute maxi mum time the probe level is uncovered Open and close the machine the xxxxx reappears door The control unit will after the second time of repeat the machine starting taying call the Service up procedure Boller Filling TURBINE ALARM The volume counter will not The delivery will continue for The delivery will continue for In case the alarm per send any impulses to the con up
25. nuova SJ simonelli Congratulations upon the wise choice you have made by purchasing the MICROBAR model In fact you are now the owner of not just a simple coffee dispenser but a true espresso coffee making machine which is fully automatic and comple tely controlled by a microprocessor This means absolute reliability and simple to use We are certain that our MICROBAR model will increase your confidence in Nuova Simonelli and that you will undoubtedly recommend others to pur chase this coffee making machine since the MICROBAR model has been chosen to increase the profitability of the coffee shop thus fully optimising running costs This machine has been manufactured in compliance with the EEC directives 89 392 89 336 73 23 89 109 and subsequent modifications With best wishes Nuova Simonelli s r l m 2 9 U T INETWEIGHT 30 660 GROS WEIGHT 721b POWER 200017 2000W DIMENSIONS 320 12 inc Rel 02 2003 MicroBar 29 I 2 l 2 Lu N nuova simonelli 3 3 5 5 1 5 2 5 3 6 1 6 2 6 3 6 4 6 5 6 6 6 7 6 8 6 10 6 11 6 12 7 7 1 7 2 7 3 7 4 30 INDEX TECHNICAL CHARACTERISTICS 29 DESCRIPTION 31 KEYBOARD DESCRIPTION Standard configuration 32 MICROBAR INTERNAL DESCRIPTION 32 SAFETY INSTRUCTIONS 33 TRANSPORT AND HANDLING 36 MACHINE
26. o reset the total amount of water used Proceed as follows Release voltage by turning the main switch off OFF Reinstate voltage by turning the main switch on ON and pressing down on the key 2 until the display reads Reset H20 Filter OU Wait Counter 8 2 RESETTING WASHING CYCLE This function makes it possible to reset the total number of washing cycles Proceed as follows Release voltage by turning the main switch off OFF Reinstate voltage by turning the main switch on ON and pressing down on the key 8 SPECIAL MACHINE SCALING FUNCTIONS until the display reads Reset Clean Counter 8 3 RESETTING MACHINE PARAMETRES This function makes it possible to remove incor rect functioning data and to reinstate the Standard Programming settings see PRESET SETTINGS chart Proceed as follows Release voltage by turning the main switch off OFF Reinstate voltage by turning the main switch on ON and simultaneously pres sing down on the keys ENTER and RESET G until the display reads Please Hait Preset fSjnuova simonelli 8 4 HANDLING MANUAL COFFEE DELIVERY GROUP This function makes it possible to activate the motor manually forming the automation of the manual coffee delivery group Proceed as fol lows Release voltage by turning the main switch off OFF Reinstate voltage by turning the main switch on ON and
27. r grids especially of the cup warmer IEN The user must not replace the appliance supply cord If the cord is damaged switch off the appliance and have a qualified technician chan ge the cord 3 If no longer using the appliance we recommend making it inoperative after removing the plug from the mains electricity cut the power supply cable N nuova simonelli CAUTION CAUTION RISK OF POLLUTION RISK OF BURNS OR SCALDING IE Do not dispose of the machine in the IE We remind you that before carrying environment to dispose of the out any installation maintenance machine use an authorised centre unloading or adjustment operations or contact the manufacturer for relati the qualified operator must put on ve information work gloves and protective footwear When adding coffee beans the machine operator must not place his her hands inside the container CAUTION RISK OF CUTTING m 2 9 U T To ensure that the machine is pro perly ventilated place it with the ven tilation side at a distance of 15 cm 5 9 in from walls or other objects Once a machine wash cycle has been started do not interrupt it as deter gent residues may then be left inside the delivery group CAUTION RISK OF INTOXICATION Use the steam nozzle with care and never place hands below the jet of steam Do not touch the nozzle imme diately after use MicroBar 35 I 2 m 2 TT N nuova simonelli
28. rn the water tank to its site 4 TALL 8 Close the hatch 9 Remove the coffee bean holder cap N nuova simonelli INSTALLATION AND PRELIMINARY OPERATIONS Pour ONLY toasted coffee beans into the coffee bean holder any other kind of coffee for example ground coffee will damage the coffee grinder Don t insert caramelized sugar coated or similarly coated coffee beans or instant coffee or other sugary beverages because they will harm the appliance m 2 9 E o T 10 Don t fill to the brim but pour just enough toasted coffee beans into the coffee bean holder to ensure correct closure of the unit AAAA A 11 Close the cap MicroBar 37 I 2 2 Lu nuova l simonelli NOTE in case the following procedure should n t take effect see the chapter on Problems and Solutions After the preliminary operations 1 Press the main switch so that the LCD dis play turns on showing the message Please Wait Heat ing the machine automatically loads the heater with water and begins heating operations When the desired temperature is reached the display will show the following messa ge Machine Ready NOTE the starting time is about 3 minutes NOTE the appliance is endowed with a secu rity system that will stop the machine after about 1 5 minutes of constant functioning of the pump to avoid p
29. shwasher If cleaned when the nozzle is still hot avoid touching it with bare hands Use a cloth dipped in hot water and or a neutral I 2 cleanser EM z AN CAUTION Never use any sort of solvent 9 9 CLEANING THE WATER TANK 9 7 CLEANING THE DROP COLLECTING TRAY Clean the water tank with hot water and GRID soap if necessary using a swab Wash the grid clean with a brush and hot water and soap NOTE rinse carefully so that undesirable resi dues aren t deposited on the bottom of the tank N nuova simonelli 9 11 CLEANING THE MILK IMPORTANT Proceed with caution NOTE To make the reassembling procedure FOAMER easier an explanatory label has been Extract the whole delivery unit including the attached to the front door NOTE Follow the Instructions applied on the milk foamer pulling it towards you label on the inside of the front door too Extract the milk foamer from the delivery Clean the drop collector see paragraph group by sliding it upwards THE DROP COLLECTING TRAY GRID Set the machine to the energy level m Z o I Disconnect all the tubes attached to it e Insert the key in the lock Disassemble the milk foamer and wash it Turn the Front panel opening key counter carefully clockwise Open the Front panel NOTE If the pause between one cappuccino and another is over one hour long it is adv
30. simultaneously pressing down on the arrow keys 2 and V 4 until the display reads mouvement IMPORTANT When the machine is switched on since the arrow key W 15 used to access this site the piston will automatically start to move downwards Press the arrow key W 4 to move the piston DOWNWARDS Press the arrow key A 2 to move the piston UPWARDS Release and reinstate voltage using the main switch to end the procedure m Z n I I 2 2 TT N Simonelli 9 9 1 SWITCHING OFF THE MACHINE To switch the machine off the main switch must be pressed again 9 2 CLEANING THE OUTSI DE OF THE MACHINE Before carrying out any cleaning operations set the machine to the O energy level machi ne switched off and plug removed from the mains Never use solvents chlorine based pro ducts abrasives CLEANING AND MAINTENANCE Cleaning the work area remove the worktop lifting it up from the front and sliding it out Remove the water collection dish underneath and clean everything with hot water and clean Sers Cleaning the external surfaces To clean the panels use a soft damp cloth 9 3 CLEANING THE DELI VERY UNIT AND Milk Foamer NOTE Only the Cappuccino version is equip ped with the milk foamer washer NOTE Follow the instructions on the label applied on the inside of the front door NOTE Before starting the washing cycle che
31. the hatch NOTE during the washing and rinsing cycles Turn the Front panel key counter clockwise keeping a container under the delivery Open the Front panel unit is advisable or empty the water col lector once the wash and rinse cycles have been completed m Z n I 9 4 REINSTATING INTERRUPTED WAS HING CYCLE Should the washing cycle be interrupted by Remove any coffee residues deposited on electricity failure when the appliance is next the delivery unit sides turned on the unit will be in rest position and the display will read Please Clean Press the DECAFFEINATED key again in order to repeat the procedure described If the DECAFFEINATED key is not pressed above in the paragraph CLEANING THE after about 20 seconds the machine will DELIVERY UNIT AND Milk Foamer automatically continue the washing cycle NOTE during the washing cycle the dose keys are disabled N nuova simonelli 9 6 CLEANING THE STEAM 9 8 CLEANING THE WATER 9 10 CLEANING THE NOZZLE COLLECTING TRAY GASKET Clean the steam nozzle each time itis used to Clean the water collecting tray with hot Use a small brush to clean any deposits or warm up drinks water and soap if necessary using a brush coffee residues off the piston and the deli very unit site or any other areas soiled with CAUTION NOTE the water collecting tray can be washed coffee RISK OF BURNS OR SCALDING l in the di
32. to 60 seconds or for as up to 60 seconds or for as sists the machine can trol unit for 5 seconds long as any of the coffee long as any of the coffee be used as a manual On registering the alarm the appliance control unit will display a mes based drink keys are pressed based drink keys are pressed sage about the drink in pro key to start the gress with the error message dosing correspond ing to the func Once the desired tion For example dose has been deli vered in the cup press the same key Flow Meter Error to halt the dose being delivered Cal the Service Technician WATER TANK EMPTY The water tank is empty The coffee will not be delive Fill the water tank Use the Hot Water key ALARM red and the dosing will be hal to eliminate any air bub ted while in progress bles Refill WaterTank MicroBor 55 m 2 o T N nuova simonelli DISPLAY CAUSE EFFECT SOLUTION CLEANING FILTER The volume counter has rea Coffee will not be delivered Regenerate cleaning filter This alarm will not halt ALARM ched the number of litres of the dose will not be halted or salts To erase the alarm see delivery The cleaning fil deliverable water set during is variable paragraph on RESETTING ter alarm can be elimina programming phase number of litres to zero see paragraph on Water Filter 28 TEMPERATURE PROBE of the two temperature Coffee
33. ump overheating In this case switch off the main switch of the machine and then turn it on again The machine is now ready to be used 38 MicroBar 5 ADJUSTMENTS TO BE MADE BY A QUALIFIED TECHNICIAN ONLY 5 1 GRINDING ADJUSTMENT WARNING Switch on the grinder to carry out the grin ding adjustment procedures NOTE the procedure is possible also with the appliance on Put the key into its lock Turn the control panel hatchdoor key coun ter clockwise Open the hatchdoor to gain access to the coffee grinder adjusting screw Following the direction of the arrows and using a 3 mm 0 12 in allen wrench grinding of the coffee beans can be adjusted to COARSER counter clockwise or FINER clockwise Lock the hatchdoor 5 2 FOAMER ADJUSTMENT NOTE the procedure is possible also with the appliance on Put the key into its lock Turn the control panel hatchdoor key coun ter clockwise Open the hatchdoor to gain access to the adjusting screw To adjust the delivery of air from the milkfoamer and consequently the amount of foam delive red turn the adjusting screw as follows Loosen the safety ring nut counter clockwi se Turn the adjusting screw as shown on the hatchdoor label to increase decrease air delivery from the foam maker Once the desired airflow has been reached tighten the safety ring nut by turning it clock wise N nuova simonelli 5 3 MILK FLO
Download Pdf Manuals
Related Search