quad screen 8 channel dual page real time 2x zoom time
Contents
1. The 8 bit function description Byte8 Byte1 Byte2 Byte3 Byte4 Byte5 Byte6 Byte7 Other OR 192. COM relay public end connect to alarm 5 16 ALARM N O relay normal open end connect to alarm 6 24 GND 7 25 VCC 5V 3 Remote control connector and communication protocol DB9 connector 2 TXD 3 RXD 5 GND 8 B 9 A Notice Pin 8 and 9 are used for RS422 Serial port s remote control function enables users to control the quad through a PC or ASCII communication terminal The quad takes special commands as the key pushing commands in the front panel and every command represents one or a combination of keys Any operation on the front panel can be done remotely as serial port imitates key pushing operation Please refer to foregoing relevant menu instructions for choosing protocols 1 PTC 1 ROBERT Fixed length character string Serial port setup BAUD n 8 1 BAUD 1200 2400 4800 9600 19200 14 QUAD COL43 DUAL PAGE COLOUR QUAD USER S MANUAL www allthings com au Command Hex Number Function Note CHAR Description keyboard IAF Ox2F 0x41 0x46 MENU FUNC FULL PP Ox2F 0x50 0x50 up arrow 122 Ox2F 0x32 0x32 2X2 down arrow 133 Ox2F 0x33 0x33 left arrow 144 0x2F 0x34 0x34 right arrow ILV 0x2F 0x4C 0x56 LIVE add ITP 0x2F 0x54 0x50 VCR dec ISL Ox2F 0x53 Ox4C EXIT SQ Ox2F 0x53 0x51 AUTO ENTER IFZ Ox2F 0x46 Ox5A FULL 01 Ox2F 0x30 0x31 Cameras1 102 Ox2F 0x30 0x32 Cameras2 03 Ox2F 0x30 0x33 Cameras3 104 0x2F 0x30 0
3. and to change values on the cursor and save the values at the same time Press ENTER key to enter the sub menu When in the main menu page press MENU key then exist menu setup and return to former mode When in sub menu setup state press MENU key the present sub menu will exist and return to the upper menu QUAD COL43 DUAL PAGE COLOUR QUAD USER S MANUAL www allthings com au Press MENU key hold for 2 seconds and then input the right password users can enter the following page At the right bottom the driver and hardware version numbers are displayed In case there is no action with the menu for 3 minutes the system will automatically return to the former display mode 1 SYSTEM SETUP Select SYSTEM SET in the MAIN MENU and enter the following SYSTEM SET sub menu Press and f to move upward and downward among the setup items then press and to set values QUAD COL43 DUAL PAGE COLOUR QUAD USER S MANUAL www allthings com au TIME System date and time The default ASIA time and date formats are YYYY MM DD Year Month Day HH MM SS Hour Minute Second FORMAT Date format Users can select among ASIA format U S format and EURO format LIVE TIME DISP Time and date display position TOP top center TOP_LEFT top left TOP_RIGHT top right NON no display BORDER DISP rim color Three color options GRAY WHITE and BLACK and users can also select OFF BACK
4. reset and select NO to cancel and return to menu setup 10 QUAD COL43 DUAL PAGE COLOUR QUAD USER S MANUAL www allthings com au Four Operations 1 Loss Video Alarm In case camera video signal has lost buzzer will beep optional monitor screen will display LOSS and indicator light will wink at the same time Press any button or recover the lost video signal then buzzer will stop beeping 2 Sensor Alarm In case users enabled motion detection alarm function once the system s detected image motion buzzer will buzz optional and monitor screen displays SENSOR in corresponding channel and indicator light winks Press any button or after the alarm holding time is over buzzer stops buzzing 3 Confirm Alarm There are two methods to confirm alarm manual mode and auto mode When the system is in menu setup state or playback state users have to use auto mode But warning characters and indicator light must be confirmed manually or the notice and winking light will always be there In case users don t confirm alarm in the alarm holding time system will make auto confirm 1 Buzzer alarm confirm when the system is in the state that users can make manual confirm press any key to confirm alarm and buzzer will stop beeps In case another alarm appears but there is already an alarm waiting for conformation then buzzer alarm won t happen for the next alarm Only when there is no other alarm waiting for confirmat
5. COLOR background color Two options BLUE and BLACK VFILTER video filter ON soft OFF sharp and clear BUZZER buzzer alarm ON switch on OFF switch off ALARM TIME select alarm holding time 3 to 255 seconds adjustable DWELL TIME auto dwell time when in each record mode share time record mode PASSWORD user s 4 digits password Any number composed by 1 to 8 FORMAT video format Two options PAL and NTSC PAL is the default setting PROTOCOL communication protocol Four options PTC1 PTC2 PTC3 PTC4 BAUD baud rate Five options 1200 2400 4800 9600 19200 bps DEVICE ID control address adjustable among hexadecimal numbers 00 to FF When using computer to control multiple quads it s maximum to control 256 quads But make sure to change 232 port into 485 bus 2 CAMERA SET Select CAMERA SET in MAIN MENU and press ENTER to enter the following CAMERA SET sub menu Press and f to move upward and downward among the setup items then press and to set values ON LOUW 00 00 23 59 QUAD COL43 DUAL PAGE COLOUR QUAD USER S MANUAL www allthings com au CAM camera image sequence number 1 to 8 PICTURE DISPLAY switch ON OFF picture TITLE DISPLAY switch ON OFF camera title display CAMERA TITLE edit title for cameras Users can select from 10 digits 26 capital letters 26 small letters and signs AUTO TIME auto dwell time 0 to 99 second PICTURE QUALITY se
6. QUAD COL43 DUAL PAGE COLOUR QUAD USER S MANUAL www allthings com au One Introduction 1 Summarization Thank you for choosing our Dual Pages Color Quad In this manual you will learn major features of the product and how to install and operate with the product Notice All the information contained in this manual is subject to change without notification ahead of time as we keep the right to update the product and offer updated manual 2 Features and Functions 1 Support 8 channels video input and display by dual pages 2 Display time date and setup display position 3 Video loss alarm 4 Support 8 channels sensor alarm 5 Auto dwell 6 Support each record mode 7 Zoom image while playback 8 Remote control by RS232 and RS485 ports 9 Relay alarm output QUAD COL43 DUAL PAGE COLOUR QUAD USER S MANUAL www allthings com au Two Front Panel Buttons 1 Front Panel View EXIT S000 0 BCH DIGITAL COLOR MULTIPLEXER MENU VCR QUAD AUTO 2 MENU 1 Press MENU and hold for 2 seconds when the machine is in display or playback state and TPASSWORD _ will appear to require users to input password The indicator light will turn on the same time Only by inputting the correct passwords users can access to MENU page to change view settings 2 Press MENU key once again to return to the upper menu or exist MENU page Notice The password is the only identity proof Please keep the p
7. TO key the system will change into auto dwell display mode The AUTO indicator light turns on then Press AUTO key once again to cancel auto dwell state and the indicator light turns off 6 Other keys iq 92 3 4 5 6 7 8 OR ne LAJ S i os 6 J ENTER 3 1 When in 4CH display state press the number key then users can see the corresponding channel s full screen image 2 When in playback state press 1 2 3 or 4 users can see the corresponding channel s full screen playback image 3 When in MENU page press t and to move the cursor upward downward leftward and rightward and press and to increase and decrease values on cursor and press ENTER to turn to the next menu or confirm change of corresponding values QUAD COL43 DUAL PAGE COLOUR QUAD USER S MANUAL www allthings com au Three Menu Setup Please access to corresponding menus including main menu and sub menus to make system setup When in real display or playback state press MENU for 2 seconds and input user s password in the area shown in the following figure to enter menu setup page Users can change password in certain menu setup page Without inputting correct password user cannot access to the menu setup pages PASSWORD 5 When in the menu setup pages press and f to move the cursor downward and upward and press
8. assword carefully and well The default password is 1111 In case users forget the customized password press MENU key and VCR key simultaneously and restart the machine then users can recover the password to default value 3 VCR 1 When in real display state press PLAY the machine begins to play files The monitor screen displays PLAY in the upper side Press 1 2 3 or 4 to see corresponding channel s full screen image 2 When in real display state press PLAY for 2 seconds user can see the playback images of 4 cameras from VCR IN There is no camera title displayed The VCR indicator light turns on then 4 QUAD 1 When in auto dwell display state or real display state not in MENU page users press QUAD the monitor will display CAM1 to CAM4 4CH images The QUAD indicator light turns on 2 When in 4CH real display state press QUAD once again the monitor will display CAM5 to CAM8 4CH images The QUAD indicator light winks then 3 When in auto dwell display state or real display state not in MENU page press QUAD for 2 seconds two pages will display on the screen by turn The QUAD indicator light winks in half the speed of that in item 2 Note users can set the dwell time for each page in MENU SYSTEM SET RECORD TIME QUAD COL43 DUAL PAGE COLOUR QUAD USER S MANUAL www allthings com au 5 AUTO When in real display state press AU
9. enters full screen auto dwell state and corresponding indicator light winks The time period is adjustable in AUTO TIME in CAMERA SET When in auto dwell state press AUTO key again AUTO indicator light turns off and system exists auto dwell state 12 QUAD COL43 DUAL PAGE COLOUR QUAD USER S MANUAL www allthings com au Five System Connection and Control 1 Rear Panel View The rear panel connection sketch map is as below OO e oea ch ceo ee T EXPLANATIONS Direct current input Video output Eight output connects Users can connect to 8 monitors or other kind of video terminals Monitor input Connect to a monitor to make surveillance VCR input Connect to VCR s video output connector and play back recorded files 4CH video output Connect to VCR s input connect to record files Sensor alarm and triggering signal input DB25 connector RS232 RS485 remote control connector DB29 connector Video input Maximum 8 channels camera video signal input or other standard video signals 2 Alarm connector 13 QUAD COL43 DUAL PAGE COLOUR QUAD USER S MANUAL www allthings com au 13 1 Oooo Oooo Googeogogeooos 25 14 Explanations 1 1 8 ALARM IN mechanical alarm input and voltage is adjustable Connect to sensor devices 2 12 TRIGGER trigger signal input connect to VCR trigger output connector 3 14 ALARM N C relay normal close end connect to alarm 4 15 ALARM
10. g 17 QUAD COL43 DUAL PAGE COLOUR QUAD USER S MANUAL www allthings com au ByteO Byte1 Byte2 Byte3 Byte11 Oxa0 Ox0b 0x01 ff Start mark Data MU8 device check_su length address m Byte5 errorcode Byte6 demo_num Byte7 menu_num Byte9 _ bit 1 auto_flag bit 0 freeze_flag byte check_sum void byte i word wtemp 0 for i 1 i lt buf_232 1 i wtemp buf_232 i wtemp Oxffff wtemp i wtemp return i 4 PTC4 PELCO Fixed length character string Baud rate Parity bit Data bit Stop bit Device address N None 8 1 0 Note N 1200 2400 4800 9600 19200 Protocol description Protocol length 8 bits Byte Byte Byte Byte4 Byte Byte6 Byte Byte8 1 2 3 5 7 OxaO Addr 0x00 0x07 0x00 Var Oxaf checksum The 6 bit function description 18 QUAD COL43 DUAL PAGE COLOUR QUAD USER S MANUAL www allthings com au Byte6 key Function description 0x01 Cam01 Cameras1 0x02 Cam02 Cameras2 0x03 Cam03 Cameras3 0x04 Cam04 Cameras4 0x05 Cam05 Cameras5 0x06 Cam06 Cameras6 0x07 Cam07 Cameras7 0x08 Cam08 Cameras8 0x11 AF MENU 0x12 PP up arrow 0x13 122 2X2 down arrow 0x14 133 left arrow 0x15 144 right arrow 0x16 ILV LIVE add 0x17 ITP VCR dec 0x18 SL EXIT 0x19 SQ AUTO ENTER Oxta IFZ FULL
11. ion new alarm can trigger buzzer to beep Users can set alarm holding time in ALARM TIME sub menu in SYSTEM SET Confirm Warning Characters when system is in real display state and alarm happens then press 1 2 3 8 to clear away corresponding channel s warning characters and make the indicator light stops winking 4 Playback VCR When system is in real display mode and not in menu setup or AUTO state then 1 Press PLAY key for once then PLAY indicator light turns on and monitor screen displays PLAY on the upper side and playback begins In case there is no video signal input for playback then the monitor displays NO PLAY VIDEO Press PLAY key in playback state and then PLAY indicator light turns off and system return to real display mode Users can zoom corresponding playback image but it will affect recording 2 Press PLAY key for 2 seconds then PLAY indicator light winks and no character displayed on screen and playback begins In case there is no video signal input the monitor 2 QUAD COL43 DUAL PAGE COLOUR QUAD USER S MANUAL www allthings com au screen will display default bootstrap image Press PLAY key for once then PLAY indicator light turns off and system returns to real display state Users cannot zoom playback image and it won t affect recording either 5 AUTO Dwell AUTO Press AUTO key in real display state then AUTO indicator light turns and system
12. ring Byte0 Oxa0 Start mark Byte1 counter Data length n 1 Byte2 Ox00 ff MU8 device address Byte3 0x02 Function code Byte4 length 1 8 maximum 8 Byte5 high addr 0x00 0x07 Byte6 low addr 0x00 Oxff Byte n Data n 0x00 Oxff Byte check_sum Byte n 1 Function code buf_232 3 0x03 read eeprom PC receives changeable length character string 16 QUAD COL43 DUAL PAGE COLOUR QUAD USER S MANUAL www allthings com au ByteO Oxa0 Start mark Byte1 counter Data length n 1 Byte2 0x00 ff MU8 device address Byte3 0x03 Function code Byte4 length 1 8 maximum 8 Byte5 high addr O0x00 0x07 Byte6 low addr 0x00 Oxff Byte n Data n 0x00 Oxff Byte check_sum Byte n 1 Function code buf_232 3 0x04 display mode Note cannot change mode when system is in playback mode PC sends off changeable length character string ByteO Oxa0 Start mark Byte1 counter Data length n 1 Byte2 0x00 ff MU8 device address Byte3 0x04 Function code Byte4 dumo_num Byte5 buf_cam 0 n Byte6 buf_cam 1 n Byte check_sum Byte n 1 Byte4 dumo_num LFULL 00 L4 01 buf_cam n n O 7 PC receives same as common search results Function code buf_232 3 0x05 restart PC receives same as common search results Function code buf_232 3 0x06 Common search result PC receives fixed length character strin
13. t image quality Please refer to the next chapter 3 PICTURE QUALITY to learn more SENSOR SWITCH switch ON OFF sensor alarm SENSOR LEVEL sensor alarm voltage HIGH high voltage LOW low voltage DETECT TIME sensor alarm working time ALARM OUT alarm output LOSS switch ON OFF video loss alarm SENSOR switch ON OFF sensor alarm output QUAD COL43 DUAL PAGE COLOUR QUAD USER S MANUAL www allthings com au 3 EVENT LIST Select EVENT LIST in MAIN menu and press ENTER key to enter EVENT LIST sub menu as below NO alarm event s sequence number 100 records from 001 to 100 CAM the sequence number of the camera that recorded a certain event DATA date of an alarm event TIME time of an alarm event EVENT cause of alarm event P_ON boot strap alarm LOSS video loss alarm MOTION motion detection alarm SENSOR sensor alarm PREVIOUS last page Every page displays 10 events Press or select NEXT and press ENTER to return to the upper page NEXT next page Every page displays 10 events Press or select NEXT and press ENTER to turn to the next page ERASE delete all the event record and begin to record from 001 QUAD COL43 DUAL PAGE COLOUR QUAD USER S MANUAL www allthings com au 4 DEFAULT RESET In case users want to restore all the settings to factory default values first select DEFAULT RESET and press ENTER key then the following page appears Select YES to confirm
14. x34 Cameras4 05 Ox2F 0x30 0x35 Cameras5 06 Ox2F 0x30 0x36 Cameras6 07 Ox2F 0x30 0x37 Cameras7 08 Ox2F 0x30 0x38 Cameras8 2 PTC 2 ROBERT_EXT Fixed length character string Serial port setup BAUD n 8 1 BAUD 1200 2400 4800 9600 19200 Transmitting Transmitting Note Sequence No value ByteO 0x03 Fixed length Byte1 Oxaa Quad recognizing character Byte2 0x01 Fixed length Byte3 Device id Quad address Byte4 6 Refer to PTC Same command 1 ROBERT as PTC1 ROBERT 3 PTC3 Serial port setup BAUD n 8 1 BAUD 1200 2400 4800 9600 19200 PC sends off changeable length character string 15 QUAD COL43 DUAL PAGE COLOUR QUAD USER S MANUAL www allthings com au buf_232 0 Oxa0 Start mark buf_232 1 counter Data length n 1 buf_232 2 0Ox00 ff MU8 device address buf_232 3 function Function code buf_232 4 buf_232 n buf_232 n 1 check_sum function 0x01_key function 0x02_ write eeprom 0x03_ read eeprom 0x04_ disp mode change 0x05_restart 0x06_general message query eeprom command buf_232 4 change character length buf_232 5 _ eeprom starting address perch buf_232 6 _ eeprom starting address low buf_232 7 __ change value Function code buf_232 3 0x01 key_function command buf_232 4 5 6 is the same as PTC 1 ROBERT Function code buf_232 3 0x02 write eeprom PC sends off changeable length character st
Download Pdf Manuals
Related Search