GNOM micro\BABY
Contents
1. C or battery 12V 7 12 Voltage value is displayed on a screen 13 Operating environment humidity up to 100 14 Operating temperature range 5 45 C 15 Complete system is packed in two high perf STORMCASE 18 Depth sensor sensibility 10 20 cn on a screen autodepth mode 19 Vehicle has slight positive buoyancy controlle dding metal weights you must repair or change the cable 2 1 Before using please check up all parts of vehicle especially propellers cable and dome Clean the vehicle if necessary check propeller rotation 2 2 Adjust the buoyancy of the vehicle if necessary inserting additional weights into plastic feet Note that cable weight in water is approximately 2 g m 2 3 Plug in 3 sockets connector to reel and video cable to monitor video input If you work from 239 VAC connect AC power cable 2 8 Operation WARNING Do not rotate thrusters on air Do not switch lights on a full power on air Put the vehicle into the water To start operation press key ANALOG MODE for wireless on a joystick All control functions are displayed on a console draw see below To move vehicle Forward Back and turn Right Left use right joysti adjust speed gradually 128 grades pressing the joystick The are indicated on an overlay To move vehicle Up Down use left joystick Also pr Jump mode Slow mode SLOW Press right joystick and adj y 50 75 100 To switch ON an2. Underwater remotely operated vehicle GNOM micro Operators YX 2008 Table of contents 1 Description 1 1 Purpose 1 2 Design 13 Technical specifications 2 User s manual for operation with GN 3 Keys and Buttons at the control 4 Screen modes 5 Maintenance operatio 6 Safety requiremen 1 Description 1 1 Purpose such as wrecks ship underwater parts underwater constructions The vehicle ha thrusters and can move underwater in operated from the surface control unit joystick based on video and data fro Maximum power consump more than 1 hour stem is packed into two plastic cases One case hicle and cable reel another control and increase the cable length up to 75 m The video ights provides 15 20 m daylight visibility in the 1 2 Design Basic set aa 2 Underw icle module es 1 3 Technical specifications 1 3 magnetically coupled thrusters 2 Operation time 500 h 3 Speed horizontal up to 1 m sec vertical go 0 3 m sec 4 Operation depth 50 m can be modified up to maximum depth 100 m 5 Cable length 50 m 6 Cable is strengthened by the Kevlar threads and the additional polyethylene shield negatively buoyant 7 Cable diameter 3 5 mm breaking effort 90 kg 8 Two clusters of ultra bright LEDs 9 Color camera PAL CCD 1 3 450 TV Lines 1 lux 10 Power supply and surface control unit 11 Power supply 12 24VDC or 230VA
3. d cata lighters us 1 R2 simultaneously e light intensity Try to avoid nods and twisting of the cable After operation please clean propellers and shafts of motors and wash the vehicle in fresh water 3 Keys and Buttons at the control panel Cam up down L1 L2 Cam center Li L2 lights ON OFF R1 R2 Jump Mode jump adjust lights R1 or R2 movement Tilt Mode camera zoom pan Screen overerlays Autodepth on off Select cams lasers on off PlayStation Fix vertical peed 4 Screen modes Mode 1 Light 100 Light brightness direction and value of heading E Autohead 150 Autohead on t The inquired depth Tt 51 Autodepth 10 0 m Depth 10 4 m 12 1V Direction and speed of the thrusters aa Disappears while faneg thrusters stop 4 Maintenance operation To maintain the vehicle it is necessary e to clean the propellers from alge sand and mud e to rinse the vehicle in the fresh water after using in the sea e to inspect the cable after the operation In case of any damages the cable must be repaired or changed e to check the magnetic disk coupling regularly s Safety requirements WARNING 1 Do not use the system with the damaged ca Do not touch underwater vehicle and in water and the power is turned ON 3 Keep the control module and th 4 When recharging the battery nd the cable reel Ind
4. el Partner LTD Nakhimovsky pr 36 117997 Moscow RUSSIA Tel Fax 7 495 129 2045 info gnom rov ru http gnom rov com
Download Pdf Manuals
Related Search