StreetRT User Manual Control Unit
Contents
1. 2 Enable Disable and Delete Offset min 15 Power 20 BE s 10 Site tab Site tab is used to determine longitude and latitude where the equipment is located and based on these data is determined by sunrise and sunset M Controllers Groups Ballasts Scheduler Astrociock Site 8 7 2015 13 13 State OK Location Latitude 13 Longitude 12 Sunrise 06 47 Sunset 19 29 Y Save Settings i Restore broadcast and group setpoints on startup v Save Documentation Add document Adjusting the position in latitude and longitude is used to determine sunrise and sunset for AstroClock When we choose sunrise or sunset in Event field in Astroclock tab the time loaded in Site tab will be automaticaly assigned Restore point means that if this option is checked on power failure and after powerline reboot the controller sends last command soitcan thappen that lights will shine during day Item Description Location location where equipement is set Latitude latitude Longitude longitude Sunrise time of sunrise Sunset time of sunset Save save the location data Settings settings Restore restore boradcast and settings of groups at start Save save settings Documentation documentation Add document add document 17 SEAK Levocska 109 O80 01 Presov Slovakia www seakenergetics com seakOseak sk Tel 421 51 77 15 0652. Creating a new group Before the creation of group it is necessary to chose the ID of control unit which is installed in the switchboard We fill individual fields in Groups tab in this order In the New group address fill the group ID After clicking Add button group with new address will be added Afterwards it is necessary to commit changes by clicking Commit button After correct configuration we ll see OK status and number and name of added group will appear in Controllers tab Y Controllers Groups Ballasts Scheduler Astroclock Site 8 7 2015 13 13 State OK Choose controller 33 v fm 1 Choose controller Group 1 Group 2 Group 3 New group address 3 lt 2 Number of new group Add 0 3 Add n_n Configuration was modified Mag 4 Commit ok 5 status OK Editing and deleting groups First we enter name of the group into Description field for example Main street Street Nr 1 Afterwards we save the name by clicking the Save button In field Setpoint we set lighting intensity for group and commit with button Set If user want to try level of intensity he can do it by clicking Test button If it s necessary to set original value it can be done by pressing Revert button If we want to delete group we mark it and press Delete button Afterwards we need to commit changes by Commit button M Controllers Groups Ballasts Scheduler Astroclock Site 8 7 2015 13 13 State OK Cho
3. sunset and its time is loaded automaticly considering the location and Offset is time interval relative to Event We send command with filled parameters by pressing Add button After correct creation new group with description of parameters will appear on lef side of screen M Controllers Groups Ballasts scheduler Astroclock Site 8 7 2015 13 13 State OK Choose controller 1 v m 1 Number of controller 2 Create dimming schedule Target Event Power Enabled Broadcast 2 Street Net 1 Main street at sunrise 100 true SESE NEN 2 Street N21 15 minutes after sunset 20 true Event sunset Power 7 Disable enable and delete group with schedule from system We choose group by its name and click Disable Afterwards it s necessary to commit changes with Save button Selected harmonogram will be disabled To re enable group with schedule we mark the group and click Enable Afterwards it s necessary to commit changes with Save button Selected schedule will be enabled For deletion of group from system we choose group and click Delete To save new settings it necessary to commit it by Save button M Controllers Groups Ballasts Scheduler Astrociock Site 8 7 2015 13 13 State OK Choose controller 1 v cH q Choose a group Taree Event Power Enabled Group Broadcast 1 Main street at sunrise 100 true 2 Street No1 v 2 Street No1 15 minutes after sunset 20 true Event sunset Disable
4. 3 State OK Controllers Groups Ballasts Scheduler Astroclock Site New controller address Add OK Astroclock establishing the timetable for dimming lights and groups depending on location a 5 Controllers tab In controllers tab you can access configuration for communication with PANTER Controllers Ballasts M Groups Panter 1 New controller address Item New controller address Configured PANTER controllers Address Controller state Controller version Consumed energy Consumed energy timestamp Active phases Modulator temperatures Set number of active phases Meter preload Broadcast setpoint Save Delete Group Power name of the group Scheduler Astroclock Site 87 2015 12 56 State OK Address Group Power 1 Main street Controller state 1 2 St Controller version 2 0 Consumed energy kWh 17 Consumed energy timestamp 2015 07 08 10 34 40 092 Active phases 1 Modulator temperatures 0 C 0 c 0 C Set number of active phases Meter preload kWh 17 7 Broadcast setpoint 26 Save Description creates a new configuration list of PANTER devices and their address which is set on PANTER from 32 63 Panter s address see Modulator PNT360 datasheet version of Panter s firmware amount of consumed energy date and time when was set the origin value of consumed energy set the count o
5. M Controllers Groups Ballasts Scheduler Astroclock Site 8 7 2015 13 13 State OK Choose controller 1 v LJ Target Event Power Enabled Group E Broadcast U 1 Main street at sunrise 100 true 2 SUECENRT s O 2 Street No1 15 minutes after sunset 20 true Event sunset v Power 20 Control options are similar to these in Scheduler tab Difference is that setpoints are notin Cron format but it s set by chosing the Event sunrise sunset and Offset which represents time interval from chosen eventin minutes Control options for Astroclock tab are described in table below Item Description Choose controller set Panter we want to configure Power lighting intensity Group name of group Event sunrise sunset plus offset Enabled displays if task is enabled or disabled Enable enable task Delete delete task from list Disable zak zat vybranu lohu Group chose group for which we want to add tasks Event chose sunrise sunset Offset time interval relative to Event Power set lighting intensity Add add task to list Save save task Reload remove ballast from group 15 Creation of dimming schedule For creation of dimming harmonogram it s necessary to login and choose number of modulation unit PANTER PNT360 Creation of harmonogram is provided by menu on the right side of screen We choose group of light for which we chose Event and Offset in minutes Setpoint is defined by Event and Offset Event is sunrise or
6. SEAK Est 1988 User Manual Control Unit StreetRT Content O A se eee oe ene NE cathe ea ataa ae TA A 1 Connection and mechanical Specifications ci ON 3 A A A wain Wen E EE II coisa natodeolw 4 Co Ro EE TE on 5 CHOU OS Tie 7 PR A ic abo 9 El OV 12 O II ocraneecereneret cacton 15 Site tab 17 Real time Lighting Control Autonomous Lighting Control 2 Street RT Web application with GPRS modul _User Friendly Web Application Powerline Communication 1 Product description StreetRT content ERR 3V3 LAN Yale SB 12 24V RS485 UART ANT DSxX OPi1 OPi2 OPi3 OPi4 OPo1 OPo2 Description signals the state of device signals error signals power on ethernet RJ45 connector MicroSD slot power suplly 12 24 V DC polarity doesn t matter serial communication RS485 universal asynchronous receiver transmitter GSM connector female thermal sensor connection pulse output from electricity meter of Panter connector for door sensor manual dimming Broadcast 100 connector for twilight switch connector for control of solid state relay connector for control of solid state relay Controller STREET RT is designed to control the outdoor lighting via existing powerlines Its signals are transferred to the powerline through PANTER PNT360 modulator STREET RT is equipped with ethernet interface which is used for communication with user Device co
7. and delete group with schedule from system We choose group by its name and click Disable Afterwards it s necessary to commit changes with Save button Selected harmonogram will be disabled To re enable group with schedule we mark the group and click Enable Afterwards it s necessary to commit changes with Save button Selected schedule will be enabled For deletion of group from system we choose group and click Delete To save new settings it necessary to commit it by Save button M Controllers Groups Ballasts Scheduler Astroclock Site 8 7 2015 13 10 State OK Choose controller 1 v 1 Choose a group 9 Target Cron interval Power Enabled Group Broadcast 1 Main street RRRA 100 true 1 Main street v Enable Disable Interval Y minute 0 59 l every each 2 nd 2 Enable Disable and Delete te hour 0 59 every each 2 nd day of month 1 31 every each 2 nd month 1 12 every each 2 nd jan feb mar dec day of week 0 7 each 2 nd sun mon tue sun E each Power list range 100 ESE gt save 14 9 Astroclock tab In Astroclock tab it s possible to create dimming schedule like in Scheduler tab Difference is that in Astroclock tab is schedule created relatively to sunrise sunset Individual setpoints are relative to sunrise sunset where time of unrise sunset is loaded automaticaly considering location from Site tab
8. ast address field and proceeding by Add button Afterwards it is necessary to commit changes by Commit button Level of dimming is set in Setpoint field and commited with Set button If everything was correct ID of new lamp will appear in list on the left side of display M Controllers Groups Ballasts Scheduler Astroclock Site 8 7 2015 13 00 State OK Choose controller 1 lt a 1 Choose controller 4 Nastavenie urovne stmievania La E Setpoint EJ 5s New ballast address 1 Add Group 1 Main street v 5 Nastavenie polohy balastu 3 Add 2 Number of new ballast Latitude Longitude Setting the location of ballast You can set location of every ballast by setting it s latitude and longitude and it s location will be shown on map through google api If we set latitude and longitude to every individual ballast they will be all shown on the map and after clicking on ballast shown on the map you can see it s settings Field Latitude is used for setting latitude of chosen ballast Field Longitude is used for setting longitude of chosen ballast 10 Adding and reassignment of lamp in the group In the Group field we fill ID of group a commit by clicking Save In case of changing group number for individual lamp we choose it s ID and change the settings for chosen lamp Afterwards we commit with Save button M Controllers Groups Ballasts Scheduler Astrociock Site 8 7 2015 13 00 S
9. ck Site Address Group Power Panter 1 32 New controller address 1 Main street Controller state 1 a 2 Street No1 0 Controller version 2 0 Consumed energy kWh 17 Consumed energy timestamp 2015 07 08 10 34 40 092 Active phases 1 Modulator temperatures 0 C 0 C o C Set number of active phases Meter preload kWh 4 Broadcast setpoint 26 lt Broadcast setpoint Save lt m Save 6 Groups tab In Groups tab you can find these options M Controllers Groups Ballasts Scheduler Astroclock Choose controller 33 Y Description Street Nr 2 1 Main street 2 Street Nr 1 Group 3 New group address 3 OK Add Setpoint 80 Test Site 8 7 2015 13 13 Assigned ballasts 1 em Revert State OK Item Description Choose controller Configured groups view groups of chosen PANTER New group address Description Save save values Delete delete saved values Setpoint set the lighting intensity of group Test Revert Set Assigned ballasts ballasts assigned to group sends the intensity value to group choice of PANTER which we want to configure vytvorenie novej skupiny pre po adovan PANTER name of group if not specified it will be set to Group X so user can see how lights lit at set intensity level set the default value for example if it was changed by test set selected illuminance value for the group
10. f active phases temperatures of individual phases of modulator set the coun of phases that are active setthe origin value of consumed energy set the lighting intensity for all luminaires saves values that have been set deletion of saved values that is assigned to chosen controller light intensity of luminaires of the group Adding and creating new configuration of modulation unit PANTER PNT360 Adding a new moudlation unit is performed via function New Controller address According to attached documentation of modulation unit we fill address and click Add Subsequently it is necesarry to confirm settings with Commit button After correct configuration you see OK status and in Configured PANTER controllers tab you llseethe number and name of installed PANTER Ey Controllers Groups Baliasts Scheduler Astroclock Site amp f 2015 13 13 State OK New controller address lt 1 New controller address YAA A A TO Configuration was modified Commit 3 Commit OK lt 4 status OK Test of connection between modulation unit PANTER PNT360 and STREET RT Device is testing if connection between modulation unit PANTER PNT360 and STREET RT is correct After clicking Broadcast setpoint we can Set the level of dimming and send the command with Save button If connection between modulation unit and control unit is correct lights will dim on wanted level M Controllers Groups Ballasts Scheduler Astroclo
11. ller 2 Create dimming schedule Target Cron interval Power Enabled Group Broadcast 1 Main street SRBA 100 true 1 Main street minute 0 59 hour 0 59 day of month 1 31 month 1 12 jan feb mar dec day of week 0 7 sun mon tue sun Power 100 co Creating dimming interval in CRON format Dimming interval can be created for all luminaires by checking the broadcast option in Create dimming schedule or for individual group which can be chosen inthe same part of screen Next step is to set interval which can be set in Cron format or by chosing items from lists There are independent lists for minutes hours days in month months and days in week For every list we can choose from four options every each list range So it s possible that dimming interval will be active every Monday Another option is that interval will be active every day Third option is to set the list of days on which will be the interval active Last oprion is to set range of days in which will be current harmonogram active e g from Monday to Friday This options are available for all settings meaning for minutes hours day in month months and day in week Examples 9210105 every day at 21 00 Sole So i every day at 1 05 r no UA every minute from 2 00 to 2 59 001 every first day in month There are free convertors for converting time to CRON format for dimming harmonogram Disable enable
12. nstruction guarantees a high operational reliability Front panel LED combination bootloader bad firmware error in device Screenshots of the web interface for setting the lighting controls StreetRT can be controlled by your phone tablet or computer with internet connection New ballast address Setpoint 2 Connection and mechanical specification Connection of STREET RT with the control portion of PANTER PANTER PNT 360 A ASTROBOX ASB 360 M adi Ochranny prvok Ful 3x63A max 63A Mechanical specification in mm for PANTER dimensions see Modulator PNT360 datasheet 42 15105 6 100 14 110 82 82 14 3 Access to STREET RT To access STREET RT connect LAN cable to your device and to your access point or PC laptop Now you can access STREET RT configuration via web browser Chrome IE Mozzila Opera Fill in the address bar in your web browser with the device IP address IP address is provided to device by DHCP and you can check the IP address of your device in access point configuration A welcome screen will appear To enter main menu press FALCON and enter Login op and Password compact er P ADDRESS FALCON SS e START U System configuration VE 4 Main menu After pressing the FALCON button and login the main menu will appear In main menu you have access to all configuration options available in STREET RT 8 7 2015 13 1
13. ose controller 33 v Configured groups Description Assigned ballasts 1 Main street fem pty 2 Street Nr 1 Street Nr 2 pty Group 3 Save lt 1 Save New group address 3 OK Ada 2 Nastavenie rovne stmievania Setpoint 80 3 Set mu Test Revert 7 Ballast tab In Ballast tab you can see this control options M Controllers Groups Ballasts Scheduler Astroclock Site 8 7 2015 13 00 State OK Choose controller 1 v E 2 Setpoint 50 New ballast address Add Group 1 Main street v Save Rese Latitude 48 Longitude 19 zov polo Popis oose controlle vyber pozadovan ho PANTER pre ktory sa bud konfigurovat skupiny ew ballast addre vytvorenie nov ho balastu slo mus by unik tne Delete deletion of ballast from the group Add creates new ballast etpo lighting intensity of the ballast e set the lighting intensity for ballast oup choice of group in which we want to assign ballast ave saves values that have been set and assign ballast in to the group Rese deletion of ballast from group atitude sets the latitude ongitude sets the longitude ave saves the settings of latitude and longitude Rese cancels the settings of latitude and longitude Adding luminaire to system Before creation of group it s necessary to choose number of controller which is installed in the switchbox Adding lamp in to the system is realized by filling the ID of lamp in the New ball
14. tate OK Choose controller 1 v EN 9 Setpoint 5 1 Number of group Delete selected New ballast address 1 Add Group 1 Main street v Ea O a 2 Save Latitude 48 Longitude 19 7 Deletion of lamp from group We choose lamp ID and press Reset 1a Afterwards it is necessary to commit changes by Commit button Chosen lamp will not be assigned to any group Deletion of lamp from system We choose ID of lamp and and press Delete button 1b Afterwards it s necessary to commit changes by pressing Commit button M Controllers Groups Ballasts Scheduler Astrociock Site 8 7 2015 13 00 State OK Choose controller 1 v E 9 Setpoint 5 7 poo a 1b Delete New ballast address 1 Add Group 1 Main street v EF ia Reset Latitude 48 Longitude 19 Eat 11 8 Scheduler tab M Controllers Groups Ballasts Scheduler Astroclock Site 8 7 2015 13 10 State OK Choose controller 1 v Target Cron interval Power Enabled Group Broadcast u 1 Main street se 100 true 1 Main street v ab 22 minute 0 59 every O each2 Lnd hour 0 59 every Jeach 2 nd day of month 1 31 every v each 2 nd month 1 12 every OJeach2 Lnd jan feb mar dec HH day of week 0 7 DJeach2 ina sun mon tue sun each Power list pange 100 Item Description Choose controller select the PANTER that we want to configure Po
15. wer intensity of lighting Group group number Interval time interval by Job scheduler Enabled display if the individual task is enabled or disabled Enable enable task Delete delete task from list Disable disable task You can create several tasks for each groups Their count is not restricted Execution of each task is entered in Cron format Tools for creation of task are on the right side of the screen Item Description Group choose the name of group Interval cron format of time when the task have to be carried out Power set the lighting intensity Add add task to the list Save save tasks Reload delete ballast from group 12 Creation of time harmonogram You can create several tasks for each groups Their count is not restricted Execution of each task is entered in Cron format Tools for creation of task are on the right side of the screen After creation of dimming harmonogram it s necessary to login a choose number of modulation unit PANTER PNT360 Creation of harmonogram is provided by menu on the right side of screen We choose group of light insert time interval in Cron format and set level of dimming in percent We send command with filled parameters by pressing Add button After correct creation new group with description of parameters will appear on left side of screen M Controllers Groups Ballasts Scheduler Astroclock Site 8 7 2015 13 10 State OK Choose controller 1 z 1 Number of contro
Download Pdf Manuals
Related Search