User manual - Wassermann Dental
Contents
1. etc in dental laboratories using rotating tools Warning A This tool is not designed as medical equipment It is not to be used on human beings The tool is not to be used in areas where special conditions apply corrosive or potentially explosive atmospheres 4 Before you start 4 1 Unpacking Transport Open cartons remove the packing materials and carefully lift out the instrument and accessories Check that the accessories are correct When transporting the unit use appropriate packing materials to avoid accidental damage Locate the user manual and read it carefully When unpacking it is important to identify any accidental transport damage If necessary draw up an immediate status report Warning Before starting the tool check on the right side of the gt controller to make sure it is set to the correct voltage 230 V or 115 V If it is not use a screwdriver to set it correctly E WASSERMANN DENTAL MASCHINEN Die Basis f r Ihr Labor 4 2 Contents HSM 500 bench top unit 111100 Handpiece 592013 Mains cable 111102 HSM 350 500 cable 111103 Handpiece holder 111896 Bench top control 111150 Cleaning set 511156 Foot switch 5 1 POWER switch The POWER switch turns the controller ON OFF When the unit is on the mains switch lights green 5 2 CONTROL rocker switch This switch enables you to control the tool by hand or knee 5 3 DIRECTION rocker switch The DIRECTIO2. blocks the handpiece the motor switches off automatically and the red LED flashes The stops if the chuck is open and the electronics also cut out if the tool starts working accidentally 1 5 Responsibility for operation and damage The responsibility for operating the unit lies exclusively with the owner or user if the said unit is incorrectly serviced maintained or altered by persons not employed by an accredited dealer or if the unit is used in a manner contrary to its specified purpose The unit must be maintained and operated in accordance with this user manual Wassermann Dental Maschinen GmbH is not responsible for damage arising from the non observance of these instructions Guarantee and responsibility provisions contained in the sales and supply conditions of Wassermann Dental Maschinen GmbH are not extended by these instructions Product responsibility lapses if the equipment is altered by unauthorized third parties or if non original parts are installed Use only original WASSERMANN replacement parts Re WASSERMANN DENTAL MASCHINEN Die Basis f r Ihr Labor 1 6 Authorized users The owner of the equipment must ensure that any users have been provided with the user manual and that they have read and understood its contents before operating the equipment il Ensure that this user manual is accessible at all times and has been read and understood 2 Care and maintenance 2 1 Maintenanc
3. N rocker switch controls the direction of rotation of the handpiece 5 4 Speed control knob This knob is used to set the desired rom When you operate the foot control or switch to manual operation the handpiece comes up to the set speed The unit has two safety reminders at 30 000 and 40 000 rpm you will detect increased rotational resistance WASSERMANN DENTAL MASCHINEN Die Basis f r Ihr Labor 5 5 Changing rotating tools Rotating tools can only be changed when the motorised handpiece has stopped completely Dangerous e Turn the handpiece casing to the right to open the chuck e Remove the rotating tool e Push in the new tool until you feel the stop Turn the handpiece casing to the left you will feel and hear it clicking into place Warning Always turn the handpiece casing up to the stop 6 Installation 6 1 Installing the motor mains and foot switch cables At the rear of the controller e Insert the motor cable 5 pole into its socket and turn to the right e Insert the foot switch cable 3 pole into its socket and turn it also to the right e Insert the mains cable into the socket on the tool Turn the tool on at the mains The tool is now ready for operation E WASSERMANN DENTAL MASCHINEN Die Basis f r Ihr Labor 6 2 Removing and assembling motorised handpiece a Removal e Turn the POWER switch to OFF e Undo the motor cable swivel nut from the handpiece cas
4. User manual HSM 500 bench top rotary tool WASSERMANN DENTAL MASCHINEN GMBH WASSERMANN DENTAL MASCHINEN Die Basis f r Ihr Labor Dear customer Thank you for choosing a product from the Wassermann range Wassermann dental equipment incorporates the highest standards of quality and the latest technology In order to enjoy maximum performance and years of trouble free operation from the equipment please read this user manual carefully before you start work and operate the unit according to the recommended guidelines Please ensure that all persons operating the equipment have read and understood this user manual Keep this user manual on hand for ready reference Company address Wassermann Dental Maschinen GmbH Rudorffweg 15 17 D 21031 Hamburg Germany Tel 49 0 40 730 926 0 Fax 49 0 40 730 37 24 e mail info wassermann dental com URL http www wassermann dental com ee WASSERMANN DENTAL MASCHINEN Die Basis f r Ihr Labor eric mL 2 MEN Sos UE ipee 3 1 1 CORRECT USE OF THIS PRODUCT 3 1 2 SAFETY SYMBOLS USED IN THIS MAN DAES Lees acces docete res 3 1 37 SAFETY GUIDELINES SE seme te dest sea 3 1 4 HANDPIECE BLOCK Pr 4 15 RESPONSIBILITY FOR OPERATION AND DAMAGE 4 1 6 AUTHORIZED USERS RE RE 5 2 G
5. are and maintenance feist ates ausu 5 2 1 MAINTENANCE uL udis a pta 5 2 2 CARE 6 2 3 CLEANING AND OR CHANGING THE CHUCK 6 USE ADDI AMO ee ee ee ee 7 Before you u ee ee 7 4 1 UNPACKING TRANSPORT ae ee 7 4 2 CONTENTS OS ee 8 B Switch Turicli ris Sa cie a oisi T 8 5 1 aaa 8 5 2 CONTROL ROCKER SWITCH nee ea an br 8 5 3 DIRECTION ROCKER SWITCH dann enden 8 5 4 SPEED CONTROLKNOB een kn ner ne na ae 8 55 CHANGING ROTATING donet 9 6 Installati n i na eel ee eas el eel deed 9 6 1 INSTALLING THE MOTOR MAINS AND FOOT SWITCH CABLES 9 6 2 REMOVING AND ASSEMBLING THE MOTORISED 10 START o See ee rr I 10 Troubleshooting Correcting errors U U nennen nnne nnn 11 8 1 S dat ua Msc 11 8 2 TECHNICAL rt 11 8 3 SPARE PARTS une ea en ER IR SER Eben 12 8 4 REPAIRS Aue an een 12 9 Warranty t 12 10 EC conformity certlficale niet t
6. d 89 336 EWG EMV guidelines and 89 392 EWG Machinery guidelines with modifications Manufacturer WASSERMANN Product description Laboratory rotary Dental Maschinen GmbH tool for dental Rudorffweg 15 17 applications D 21031 Hamburg Model HSM 500 laboratory bench top rotary tool HSM 500 111994 Applicable EN 61010 1 1993 2 1995 standards EN 60335 2 54 03 97 EN 50081 1 EN 50082 1 Hiermit wird best tigt dass die oben bezeichnete Maschine den genannten EG Richtlinien entspricht Diese Erkl rung wird ung ltig falls die Maschine ohne unsere Zustimmung ver ndert wird This is to confirm that the above mentioned machine complies with the described EC rules This declaration becomes invalid if the machine is modified without our approval Cette machine est conforme aux normes en vigueur de la Communit Cet avis est nul et non avenant si cette machine est modifi e sans notre accord Esta maquina anteriormente mencionada cumple con los limites requeridos por el reglamento EC Ahora bien esta declaraci n quedar invalidada en caso de realizar modificaciones al aparato sin nuestra aprobaci n Hiermee wordt bevestigd dat bovengenoemde machine voldoet aan de voorgeschreven EU normen Deze verklaring verliest geldigheid als er zonder onze uitdrukkelijke toestemming wijzigen aan de machine worden aangebracht Place date Hamburg 10 April 2003 Company stamp Signed lt we pydorfiwed 197 7 re
7. e Always disconnect the power cable before undertaking cleaning or maintenance The model plate must always be legible and should not be removed The equipment should be cleaned at regular intervals to ensure trouble free operation requires only normal cleaning sponge damp cloth mild detergent Do not use chemical additives es WASSERMANN DENTAL MASCHINEN Die Basis f r Ihr Labor 2 2 Care il Remove external dirt from time to time with some form of cold cleaner Use only cold cleaners to avoid damaging the paintwork or removing the lettering Recommended A151 universal cleaner 2 3 Cleaning and or changing the chuck Turn off the mains power e Open the chuck see 5 4 and remove the by turning it manually to the left e Insert the chuck key fully in the chuck e Hold the shaft firmly with an adjustable wrench e Remove the chuck by turning the chuck key to the left e Use a brush to clean the shaft and then lubricate the chuck and the bore with two drops of oil each e Insert the chuck by hand e Make sure that the chuck mechanism is still open e Insert the chuck key in the chuck and hold the shaft firmly with a wrench e Tighten the chuck up to the stop WASSERMANN DENTAL MASCHINEN Die Basis f r Ihr Labor 3 Use Application The HSM 500 is designed for working with dental materials such as stainless steels plastics ceramics
8. ienne tantu ct nei sb eate CE E e ao inca 13 WASSERMANN DENTAL MASCHINEN Die Basis f r Ihr Labor 1 For your safety 1 1 Correct use of this product This laboratory equipment is designed for working with dental materials stainless steels plastics ceramics etc in dental laboratories using rotating tools 1 2 Safety symbols used in this manual Warning This is a warning of risk situations and dangers Failure to observe this warning could be life threatening These warnings must be observed il Information This symbol draws your attention to specific features which must be observed 1 3 Safety guidelines Configuring and operating this equipment requires precise knowledge and observance of the instructions in this user manual The equipment is designed only for its intended application Servicing and repairs should be carried out only by authorised specialists Make sure that the unit is connected to the correct mains voltage WASSERMANN DENTAL MASCHINEN Die Basis f r Ihr Labor Danger Do not touch the tool when it is rotating or coming to a stop Be sure to follow the manufacturer s guidelines for the maximum permissible speed of the rotating tools used Take the following precautions before starting work A e Wear eye protection e Use a protective visor 1 4 Handpiece block This rotary tool features electronically controlled overload protection If an excessive load
9. ing e Pull the cable plug out of the handpiece b Assembly e Take the cable plug and insert it into the handpiece in the correct orientation e Tighten the motor cable swivel nut by turning it clockwise by hand AN Warning Do not use pliers 7 Start up e Check that the rotating tool has been inserted up to the stop e Set the CONTROL switch to foot control e Turn speed control knob to low rpm setting e Set the POWER switch to ON it will light green e Push the foot switch the handpiece will run at the selected speed e There are two inbuilt safety features for your protection a notch at 30 000 rom and a stop at 40 000 rpm 11 WASSERMANN DENTAL MASCHINEN Die Basis f r Ihr Labor 8 Troubleshooting Correcting errors 8 1 Faults Faults Likely cause Likely solution Red LED flashes Faulty cable Replace cable Overload block triggered Red LED stays on System error If the above recommendations do not solve the problem contact your dental depot or our Service department 8 2 Technical data Open chuck on handpiece Thermal overload switch Work with less pressure Close chuck Turn unit off and allow to cool Send unit in for service Voltage switchable 220 240 V 50 60 Hz 110 130 V 50 60 Hz Max power consumption unit 230 W Motor power output 160 W Max torque 7 5 Ncm Fuse 2 5 Mot
10. m Wassermann Managing Director p WASSERMANN DENTAL MASCHINEN Die Basis f r Ihr Labor WASSERMANN DENTAL MASCHINEN WASSERMANN Dental Maschinen GmbH Rudorffweg 15 17 D 21031 Hamburg Tel 49 0 40 730 926 0 Fax 49 0 40 730 37 24 e mail info wassermann dental com Internet http www wassermann dental com
11. or speed 1500 50 000 rpm Duty cycle S6 4min 10 min Height 84 Width 215mm Depth 277 mm Weight 4 85 kg il Noise emission lt 70db A lil We reserve the right to make technical changes WASSERMANN DENTAL MASCHINEN Die Basis f r Ihr Labor 8 3 Spare parts Spare parts Description HSM 350 500 motorised handpiece Handpiece cable Handpiece holder Cleaning oil Brush Brush 111105 2 35 mm chuck 111106 3 mm chuck 8 4 Repairs Servicing or repairs to the unit must only be carried out by trained technicians Only original spares are to be used Responsibility for the product is voided if altered by unauthorized persons or if inappropriate components are installed 9 Warranty The warranty period for our equipment is 12 months If faults occur within the warranty period contact your dental depot or get in touch directly with our Service department Your rotary tool should only be operated in perfect condition If faults occur which could harm operators or third parties the unit should not be used until it has been fixed This warranty does not cover damage caused by improper use external mechanical causes transport damage or interference with the unit by unauthorized persons ds WASSERMANN DENTAL MASCHINEN Die Basis f r Ihr Labor 10 EC conformity certificate in accordance with 73 23 EWG low voltage guidelines modified by 93 68 EWG an
Download Pdf Manuals
Related Search