ZIGVIEW - Argraph
Contents
1. Geruline e G ZIGVIEW _ Digital Angle View Finder SECULINE Co Ltd Digital Angle View Finder Zl G VIE W Thank You For Purchasing ZIGVIEW The ZIGVIEW is a Digital angle view finder that has a CMOS image sensor and a color TFT LCD attached It allows users to take a variety of pictures easily by providing real time images of view finder information SLR Single Lens Reflex camera Before using ZIGVIEW please read carefully the instructions so as to be fully aware of features of the product Copyrights Except for those privately owned images of people and certain objects cannot be used They cannot be displayed in public places Testing ZIGVIEW You can test this product before installing it on a camera You can check whether images are properly displayed on the LCD screen and whether the product can be operated as instructed in the menus ZIGVIEW is a trademark belongs to Seculine Adobe is a trademark belongs to Adobe Systems Windows is a brand or a trademark registered by Microsoft U S in the United States and othe countries SECULINE Co Ltd Digital Angle View Finder Zl G VIE W Safety Precautions Do not use any accessories such as power adapters other than those recommended in this user s manual Connect the power cord thoroughly and do not touch the power cord with wet hands When pulling out the cord do not hold the cord but hold and pull out the plug part Do not damage bend or twist th2. While zooming pushing and holding the Navigation button towards right hand side will set the image displayed to the normal size Zooming Out a To zoom out push the Navigation button upwards The Zoom factor displayed decreases Zooming out will stop when it reaches the size that is set in the Screen Size Adjust If the Extra Zoom Out is set to ON then pushing the Navigation button upwards again at this time will zoom out the screen lt Zooming In gt AE Speed Adjusting the metering speed or turning the exposure metering off may allow users to have clearer image under various shooting conditions 1 Push the Navigation button towards left in a normal or a zoomed in screen The current AE Speed value is displayed 2 Pushing the Navigation button towards left while the AE Speed value is displayed will change the AE Speed value AE Speed 1 lt AE Speed gt SECULINE Co Ltd Digital Angle View Finder Zl G Vi E W Using ZIGVIEW Still Image Hold A HOLD 1 Push the Navigation button shortly towards right in normal or zoomed in out screen The screen is stopped and Hold is displayed at the top of the screen 2 Pushing the Navigation button shortly towards right again will exit the Hold mode e A lt Still Image gt i Panning 1 Press the center of the Navigation button while the screen is zoomed in A cross shaped icon will appear at the bottom center of the screen and the device enters
3. You can set a variety of values such as Screen Size and AE Adjust in the menu mode Turn on the power switch to display the LCD screen 1 Push and hold the Navigation button towards right hand side then menu Setup screen appears and enters the menu Setup mode 2 Push the Navigation button towards right hand side shortly then the submemu of the mode that has gt icon appears For any mode that does not display the icon gt its setting can be changed without moving to submenu 3 In the Setup mode pushing the Navigation button up and down will move the cur sor if the cursor is on a selectable option of a menu The value is set if the cursor appears in the set value 4 In the menu Setup mode pushing the Navigation button left will switch to the previous mode Push the Navigation button left repeatedly until you exit the menu screen if you want to exit the menu screen The desired value is set when you exit the menu SECULINE Co Ltd Screen Adjustment Size Adjust Digital Angle View Finder Z G Vi E W When ZIGVIEW is installed screen sizes may vary in right left up and down depending on cameras Adjust the screen size to fit your camera You can adjust the screen in left up right down directions respectively Turn on the power switch and the LCD screen appears 1 Push and hold the Navigation button to the right and the Setup Menu appears 2 Push the Navigation button up and down to go to th
4. Setup then push the Save Setup button to the right 1 5 4 Push the AT button up and down to select between 1 and 5 Then kk the center of the Navigation button after selecting the desired value to reset the 1 5 6 Default Load value Center Confirm SECULINE Co Ltd Digital Angle View Finder ZI G VIE W Adjusting Backlight Brightness Adjusting the LCD Backlight Brightness 1 SETUP 0 95 u Size Adjust b 1 Push and hold the Navigation button to the right and the Setup Menu appears apts competi ss 2 Push the Navigation button up and down to move to the Back light Brightness ee aa menu 10 Then press the button to the right Extra Zoom out OFF m Display Battery Status ON Display Zoom Status ON 3 Push the Navigation button to select the desired value m Save and Load b 4 Available range is from 1 to 10 1 is the darkest where 10 is the brightest Size Adjust b u AE Mode b AE Compensation u Negative Effect B W Effect m Back Light Brightness m Extra Zoom out m Display Battery Status a Display Zoom Status u Save and Load b SECULINE Co Ltd Digital Angle View Finder Zl G VIE W Troubleshooting 1 2 oo 4 GI Images on the camera view finder is shown partially or too small When you first use the product or if the values are set at factory or a connected camera is changed you have to adjust the screen size to the camera to be used Please re
5. the AE Compensation menu BW Effect a g p p Back Light Brightness 10 Then push the Navigation button to the right Extra Zoom out OFF Display Battery Status ON Display Zoom Status ON 3 Push the Navigation button up and down to set the appropriate AE value that y r Save and Load J matches the image displayed on the screen 3 SETUP VOI N If the subject is too bright or too dark the displayed image may look strange Size Adjust b AE Mode b AVG p AE Compensation 4 Push the Navigation button to the left to exit the menu Negative Effect OFF B W Effect OFF m Back Light Brightness 10 m Extra Zoom out OFF m Display Battery Status ON Display Zoom Status ON a Save and Load b a SECULINE Co Ltd Digital Angle View Finder Ll G VI E W Using ZIGVIEW Screen Effect You can select the Effect from the menu to give various effects to subjects on the display Turn on the power switch and the LCD screen appears 1 Push and hold the Navigation button to the right and the Setup Menu appears 2 SATA u AE Mode b 2 Push the Navigation button up and down to move to the Negative Effect or the Se B W Effect menu Then push the Navigation button to the right B W Effect Negative Effect Color is reversed to the same form as negative film 3 B W Effect Color screen is displayed in black and white Display Battery Status a Display Zoom Status Save and Load b 3 Push the Navigation button up and down to se
6. cssssssseesssssesessssessessetsessseeeseseen 18 Front Side View of the Main Body 1 11111 1 7 CU ere 18 Before Using This Product 8 Display Zoom and Battery Status 19 Attaching Eyepeice Adapter 8 Save and Load Peer rrr rrr A tre ts 20 Charging the Battery s aeussasa aaa saa asasaasasansasa 9 Adjusting Backlight Brightness 21 peel ZEE 10 Adjusting the LCD Backlight Brightness 21 Power On and Off Reset 1 24211 1122 10 EE esl ZZ 22 Using the MENU ooo EEG A 11 ETCH 15 Product SPECIFICATIONS 222111121111 2111 23 Size oj TS PORN 12 O ONE aw 24 AE NIOO a aoea EETA 13 AE Compensation sssisicsscsicsscsscsscsdcssdssdsaisssscscaienviuveds 14 SECULINE Co Ltd Package Contents This product package contains following components Instruction Book Power Adapter Eyepiece Adapter Digital Angle View Finder Zl G Vi E W Driver Screw SECULINE Co Ltd Digital Angle View Finder Z G VIE W Name of Each Part Front Side View of the Main Body Power Navigation button Display Unit Eyepiece Adapter Moves and Selects Left Right Up and Down Charging Lamp External Communication Port for Maintenance DC Power Input Port SECULINE Co Ltd Digital Angle View Finder Zl G VIE W Before Using This Product Attaching Eye
7. e Size Adjust menu And push the right side and the arrow lt a appears on the up and down of the left side 3 Push the Navigation button to the left and right to adjust the size of the left screen 4 Push the Navigation button up and the arrow 4 appears on the left and right at the top 5 Push the Navigation button up and down to adjust the size of the top screen 6 Push the Navigation button to the right and the arrow s appears at the top and bottom of right side 7 Push the Navigation button to the left and right to adjust the size of the right screen 2 8 Push the Navigation button down and the arrow amp appears on left and right at the r bottom 9 Push the Navigation button up and down to adjust the size of the bottom screen 10 When the size adjust is completed press center of the Navigation button shortly SETUP v0 95 AE Mode b AVG AE Compensation 5 Negative Effect OFF B W Effect OFF u Back Light Brightness 10 m Extra Zoom out OFF m Display Battery Status ON Display Zoom Status ON Save and Load b e 4 4 t KJ SECULINE Co Ltd Digital Angle View Finder Z G VIE W AE Mode Setting the appropriate exposure mode for specific subject and conditions improves the image quality dis played for the exposure amount is automatically adjusted Turn on the power switch and the LCD screen appears u Size Adjust b 1 Pu
8. e cord It may cause electric shock or a fire Do not let dirt in the connected parts or cable connections Charge the battery at the temperature of 0 to 40 C When excessive heat smoke or smell is generated while charging a battery remove the battery from the power out let immediately Place the battery charging devices out of the reach of children The cord may stifle or electrically shock a child Do not place the cord near a heat generating object It may deform the cord or cause a fire or electric shock by melt ing the insulated parts If the product is dropped to the ground and the case is damaged do not touch the built in parts It may cause electric shock Call the nearest Customer Service Center Do not disassemble or rebuild the product It may cause permanent damage on the product and malfunctioning that can harm people Place the product out of the reach of children Damaged product may result in injury Before using the product on an airplane in a hospital you must check whether such usage is allowed Electronic waves produced from the product may cause malfunctioning of devices Do not keep the equipment in a place where dirt and moist accumulate easily It can cause a fire or electric shock or damage the product Do not hold the product alone when the product is installed in the camera Due to the weight of the camera it may damage the connected part between the product and the camera or the product Do not clean the de
9. e equipment off and on the user is encouraged to try one or more of the following measures Reorient or relocate the receiving antenna Increase the distance between the equipment and receiver Connect the equipment to an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician Modifications Any changes or modifications not expressly approved by the grantee of this device could void the user s authority to operate the device Declaration of Conformity Name Seculine Co Ltd Address Suite 202 2nd Fl Mirae Bldg 854 5 Bangbae Dong Seocho Gu Seoul South Korea 137 060 Trade Name Seculine Co Ltd Model Number SC V100 This device has been tested according to the FCC CISPR22 95 requirements for Class B devices and found compliant with the following standards EMI EMC ANSI C63 4 2000 FCC Part 15 Subpart B This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesirable operation Party Responsible for Product Compliance
10. fer to the manual and adjust the size of images The product is not working even after the power switch is turned on he product does not work if the battery is not charged Neither does it work when the battery is exhausted When the product does not work after charging the battery for certain hours please call the nearest service center Battery is not charged even though the adapter is connect Please check whether the light of the charging lamp is on Check the connection of the charger and if the battery is not charged after certain hours please call the nearest service center Warranty period of the supplied battery is six months The performance of the battery can be degraded when it is neg lected or is not used for a prolonged time Still images appear briefly when power is on When power is off the last image of the previous screen is saved So the saved image may be seen briefly when the power switch is turned on This does not mean malfunctioning of the product You can continue using the product Images do not change and remain still Initialize the product by pressing the Reset button Turn off the power switch and turn it on again if the product still does not work properly If still images are displayed long after external shock is applied it may indicate malfunctioning Please call the service center 6 The Navigation button cannot be pushed or is malfunctioning The navigation key installed in the prod
11. lect ON OFF Size Adjust b u AE Mode b m AE Compensation u Negative Effect B W Effect m Back Light Brightness m Extra Zoom out m Display Battery Status u Display Zoom Status m Save and Load b SECULINE Co Ltd Digital Angle View Finder Zl G Vi E W Using ZIGVIEW Setting the Extra Zoom Out Sets the zoom range of the screen Turn on the power switch and the LCD screen appears 1 Push the Navigation button to the right and the Setup Menu appears oe N AE Compensation 5 u Negative Effect OFF 2 Push the Navigation button up and down to move to the Extra Zoom out menu B W Effect OFF Then push the Navigation button to the right PE Zeon oul ee baia m Display Battery Status ON 3 Push the Navigation button up and down to select ON OFF RR rk taj Ad s Save and Load b j Set to ON Approximately 50 200 Zoom Range Set to OFF Approximately 100 200 Zoom Range Size Adjust b u AE Mode b AVG 4 Push the Navigation button to the left to exit the menu 3 A p Negative Effect OFF B W Effect OFF m Back Light Brightness 10 Extra Zoom out m Display Battery Status ON m Display Zoom Status ON Save and Load b j SECULINE Co Ltd Digital Angle View Finder Z G VIE W Zooming In m To zoom in push the Navigation button downwards The Zoom factor displayed increases and the image enlarges from the center The current zoom factor is found at the left bottom of the screen
12. om Status Then press the button to the right Save and Load b 3 Push the Navigation button up and down to select ON The current battery status is displayed at the right top of the screen SECULINE Co Ltd Digital Angle View Finder ZIG VIEW Using z G VIE W lt SETUP v0 95 u Size Adjust b AE Mode b AVG a AE Compensation 5 Save and Load BW Effect OFF m Back Light Brightness 10 m Save and Load m Extra Zoom out OFF You may save and load the screen setup values up to 5 modes depending onthe Display Battery Status ON conditions Display Zoom Status ON Turn on the power switch and the LCD screen appears Ea A m Save Setup A 1 Push and hold the Navigation button to the right and the Setup Menu appears eee 2 Push the Navigation button up and down to move to the Save and Load Then ress the button to the right 1 5 3 Push the Navigation button up and down to select the Save Setup and press the Load Setup AEA haat button to the right 1 5 6 Default Load 4 Push the Navigation button up and down to select between 1 and 5 Then press the center of the Navigation button to save the present value m Load Setup oo 1 Push and hold the b button to the right and the Setup Menu appears Center Confirm 2 Push the Navigation button up and down to move to the Save and Load Then SAVE and LOAD p the button to the right 3 Push the Navigation bution up and down to select the Load
13. peice Adapter Install an eyepeice adapter that fits the camera before using this product Attach the eyepeice adapter to the main body of ZIGVIEW by using the supplied driver and four screws lf the screws are not tightly fixed the main body and the camera may be loosely connected resulting in damage on the product Secure the four screws tightly Not fully securing the screw may cause damage to the prod uct due to the loose connection between the main body and the Camera In addition fastening screws too tightly may damage threads of screws Apply appropriate force to fasten 4 screws evenly just enough to secure the adapter SECULINE Co Ltd Digital Angle View Finder Z G VIE W SS pg EI II ARIAT IT CIES EI Charging the Battery Charge the built in battery fully with the provided battery charger after opening the package It takes about 2 hours to charge the battery fully which may vary depending on charging conditions Connect the charger and the main body thoroughly when charg ing battery Otherwise it may take longer to charge battery or battery may not be fully charged Turn off the power switch on the side when charging battery If the swtich is on it may take longer to charge the battery Repetitive charging discharging may degrade the internal rechargeable battery performance over time SECULINE Co Ltd Digital Angle View Finder ZI G VIE W Basic Operations Power On and Off Reset m Po
14. sh and hold the Navigation button to the right and the Setup Menu appears AVG AE Compensation 5 u Negative Effect OFF 2 Push the Navigation button up and down to move to the AE Mode Menu B W Effect OFF Then press the Navigation button to the right a Five AE modes appear Display Battery Status ON AVG AE values are set after measuring the average of all the shooting subjects RA PSO Rag on CWE AE values are set after measuring the center of the subject C1 AE values for 50 of the center area 37 AE WODE C2 AE values for 25 of the center area C3 AE values for 12 of the center area AE Mode AVG AVG Average entire image CWE CENTER Weighted C1 50 Area around Center C2 25 Area around Center 4 Push the Navigation button to the left to exit the menu ey See eee ar 3 Push the Navigation button up and down to set the desired exposure SECULINE Co Ltd Digital Angle View Finder Zl G VIE W Screen Adjustment AE Compensation You can adjust measured exposure when the AE value of shooting subject is consistent or depending on shooting circumstances so as to adjust brightness of the screen Turn on the power switch and the LCD screen appears 2 lt SETUP v0 95 u Size Adjust b 1 Push and hold tne Navigation button to the right and the Setup Menu appears RTT oe 5 Negative Effect OFF 2 Push the Navigation button up and down to move to
15. the panning mode 205 ka 2 Move the screen using 4 directional keys of the Navigation button l lt panning gt 3 Pressing the center of Navigation button will exit the panning mode SECULINE Co Ltd Digital Angle View Finder Z G VIE W Display Zoom and Battery Status m Display Zoom Status s SETUP v0 95 The zoom rate is displayed at the left bottom of the screen Size Adjust b AE Mode b AVG Turn on the power switch and the LCD screen appears AE ols 5 H H Negative Effect OFF 1 Push and hold the Navigation button to the right and the Setup Menu appears ByyEtect ace 2 Push the Navigation button up and down to move to the Display Zoom Status Back Light Brightness 10 Extra Zoom out OFF menu Display Battery Status ON Display Zoom Status ON m Save and Load b Then press the button to the right 3 Push the Navigation button up and down to select ON When using the zoom function on the screen the rate is displayed on the left bot tom m Display Battery Status Size Adjust b The battery status is displayed at the right top of the screen z AE a Turn off the power switch and the LCD screen appears Nedative Elfect H H i B W Eff 1 Push and hold the Navigation button to the right and the Setup Menu appears ZAP w 2 Push the Navigation button up and down to move to the Display Battery Status Extra Zoom out menu Display Zo
16. uct is a high precision device If you apply excessive force it may cause mal functioning Please push the left right up down and center of the navigation button precisely 7 Adapter is not attached to the main body Please check the provided adapter meets the local specifications Please check whether the main body of the adapter is damaged If the adapter is damaged or broken down you can purchase an adapter separately SECULINE Co Ltd Digital Angle View Finder Ll G VIE W Product Specifications 1 3M pixel CMOS sensor Display 1 9 inch color TFT LCD 176 x 220 x RGB External Power DC 5V AC power adapter Rechargeable Lithium Polymer Battery 1000mAh 2 hours from empty to full SECULINE Co Ltd Digital Angle View Finder Zl G VIE W Safety Information FCC Part 15 This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However this notice is not a guarantee that interference will not occur in a particular installation If this equip ment does cause harmful interference to radio or television reception which can be determined by turning th
17. vice with paint thinner benzene or other volatile solution It may cause a fire or harm the human body SECULINE Co Ltd Digital Angle View Finder Zl G VIE W Handling Precautions a This product is a high precision device Do not drop the product or apply physical shock to the product a This product is not water proof and cannot be used under water Please be careful not to expose the product to water directly and indirectly f placed on the front seat of a car or exposed to sunlight in other ways high temperature may damage the product a Do not disassemble or repair the product yourself It may cause malfunctioning and will void your warranty regard less whether the warranty period remains a Do not place the product near highly corrosive chemicals for a prolonged time The pixel of LCD may differ from the specifications but the difference is not over 0 01 percent of the valid pixel This does not mean malfunctioning of the product SECULINE Co Ltd Digital Angle View Finder Z G VIE W Table of Contents Thank You For Purchasing ZIGVIEW 2 JANE 15 Safety Precautions 3 Screen EE 15 OZZIE Setting the Extra ZOOM Out 21421421111211211 16 OIEMOPTECAUNUONS 1 1 2121211211112111221 4 ZOOM za R Z O O AA 17 Package Contents o cccccccccccccccccccccsccccsccsceceessseeeees 6 Zooming CU oe ERA AOR 17 AE SDE wa 17 Name Of Each Part screenees 7 Still Image Hold ssee
18. wer On 1 Push the power switch to ON 2 Power and the LCD screen are turned on when you push the Navigation button When you turn on the switch first time after purchasing the product displays are set at factory values You can change the values in the Set Mode If you turn off the switch and turn it on again while using the product the previously set values are restored m Standby Mode 1 It is convenient to put the device in standby mode when it is not used temporarily In standby mode it consumes only a little standby current 2 Pressing and holding the Navigation button in the middle of use will turn off the LCD and enters standby mode 3 Pressing the Navigation button in the standby mode will turn on the LCD and enters nor mal mode lt Exiting the Standby Mode gt lt Power Off gt m Power Off 1 Slide the POWER switch towards OFF It completely turns standby power off 2 When not using for a long period of time turn the POWER switch OFF gt ES u RESET l ery Initialize all the functions by pressing the RESET if the product is ON malfunctioning or the screen does not change Press the RESET hole with a sharp instrument such as a ballpoint pen as shown in the picture lt Reset gt The power switch and the RESET button are designed to resist physical force but excessive force may cause damage on these parts SECULINE Co Ltd Digital Angle View Finder Z G VIE W Using the Menu
Download Pdf Manuals
Related Search