Home
MEMORY CARD slots
Contents
1. When playing PlayStation 2 format software use the Memory Card 8MB for PlayStation 2 When playing PlayStation format software use the Memory Card For the PlayStation video game console units of game data are described as memory blocks however for the PlayStation 2 computer entertainment system they are described as KB kilobytes 8 MB 8 000 KB Memory Card 8MB for PlayStationo2 sold separately The Memory Card 8MB for PlayStation 2 can save and load PlayStation 2 format software game data Each Memory Card 8MB for PlayStation 2 can save about 8MB of game data but some of this may be used as file control information Memory Card sold separately The Memory Card can save and load PlayStation format software game data Each Memory Card can save 120 KB 15 memory blocks of game data Note You cannot copy data to a Memory Card 8MB for PlayStation 2 or Memory Card that does not have enough memory available Before playing check how much space is needed to save the game and how much space is available on the Memory Card 8MB for PlayStation 2 or Memory Card Check the appropriate software manual to determine the amount of space needed to save the data for a given game MAGICGATE is a copyrighted anti copying technology created by Sony Corp This MAGIC GATE mark does not necessarily imply compatibility with other products bearing the
2. MAGICGATE trademark Inserting Memory Card 8MB for PlayStation 2 and Memory Card Insert the Memory Card 8MB for PlayStation 2 or Memory Card into the MEMORY CARD slot with the arrow side up MEMORY CARD slot 1 MEMORY CARD slot 2 Notes on using Memory Card 8MB for PlayStation 2 or Memory Card with a Multitap e When using PlayStation 2 format software use the SCPH 10090 E Multitap for PlayStation 2 When using PlayStation format software use the SCPH 1070 E Multitap e When you insert the SCPH 1070 E Multitap into controller port 1 do not insert the Memory Card 8MB for PlayStation 2 or Memory Card into MEMORY CARD slot 1 of the PlayStation 2 console This also applies when you insert a Multitap into controller port 2 If you do so the data may be lost Copying deleting game data You can copy game data from one Memory Card 8MB for PlayStation 2 or Memory Card to another or delete data you no longer wish to keep You cannot however copy game data of PlayStation 2 format software to the Memory Card You can check copy and delete game data in the browser screen For details on the browser see Checking copying deleting game data on page 7 Note You cannot save or load game data in the browser screen For details on game data saving or loading refer to the software manual Playing an audio CD Playing an audio CD K Press the
3. Selects the language for the on screen display e English e French e Spanish e German e Italian e Dutch e Portuguese Using the browser screen You can do the following operations using the browser screen e Checking copying deleting game data ona Memory Card 8MB for PlayStation 2 or Memory Card e Starting PlayStation or PlayStatione2 format software e Playing an audio CD e Playing a DVD video Select Browser using the up and down directional buttons and press the X button The browser screen appears on the TV screen The Memory Card 8MB for PlayStatione2 Memory Card or discs inserted in the console are displayed as icons Checking copying deleting game data You can copy game data from one Memory Card 8MB for PlayStatione2 or Memory Card to another or delete data you no longer wish to keep You cannot however copy game data of the PlayStatione2 format software to the SCPH 1020 E Memory Card Insert the Memory Card 8MB for PlayStation 2 or Memory Card in advance 1 Select the icon of the Memory Card 8MB for PlayStatione2 or Memory Card where the game data you want to check copy delete is saved and then press the X button 2 Check copy delete game data according to the instructions on the screen Note While copying or deleting game data do not remove the Memory Card 8MB for PlayStation 2 or Memory Card Checking version information You can
4. Smooth you can make the display smoother when playing certain PlayStation format software titles Depending on the software there may be no effect In this case select Standard Note The PlayStation Driver setting automatically returns to Standard default setting when you press the RESET button or turn off the console uop uuo Playing a game X Starting a game EE Turn on the console using the MAIN POWER switch on the back of the console The standby indicator on the front of the console lights up in red to indicate that the console is now in standby mode FJ Press the 5 standby RESET button The indicator turns green and the start up screen appears EJ Plug the Analog Controller DUALSHOCK 2 or Analog Controller DUALSHOCK into the console 1 EJ Press the open button The disc tray opens E Place a disc on the disc tray with the label side facing up KJ Press the button The disc tray closes Screen or appears and the game is ready to begin Note Set the Analog Controller DUALSHOCK 2 or Analog Controller DUALSHOCK to the appropriate mode for the software page 9 See the appropriate software manual for details 5 Restarting a game Press the RESET button very briefly Be sure not to hold the button down for any length of time as this will put the console in standby mode Be caref
5. open button The disc tray opens Wl Place a disc on the disc tray with the playback side facing down EJ Press the button The disc tray closes EJ Select the audio CD icon in the browser screen page 7 then press the X button The Audio CD screen appears E Select the icon number using the directional buttons then press the X button The CD operation screen appears and playback starts Operating the CD player While a disc is playing select the button in the CD operation screen using the right and left directional buttons Then press the X button B Start playing H Pause Stop playing Find the beginning of the current or previous track Fast Forward Rewind Find the beginning of the next track yay i Playing in various modes You can change between various play modes As a default setting Normal is selected for Play Mode and Off is selected for Repeat Select the audio CD icon in the browser screen then press the A button to change the settings To play the desired tracks in a specifed order 1 Select Play Mode using the up and down directional buttons and press the X button 2 Select Program using the right and left directional buttons and press the X button 3 Select the number of the specific track using the directional buttons then press the X button Repeat this step until you have selected all the
6. 6 ZEE ZEE ZES bi 4 V4 44 Poor sound quality gt Clean the disc gt The console is placed on an unstable surface Place the console on a stable and flat surface Do not shake or vibrate the console gt Moisture has condensed on the disc see page 2 gt You are playing a CD with DTS sound tracks You can play a CD with DTS sound tracks only when the console is connected to audio equipment with a DTS decoder The surround effect is difficult to hear when you are playing a DVD video with a Dolby Digital sound track gt Check the speaker connections and settings Refer to the operating manual of your receiver amplifier gt Depending on the DVD the output signal may not comprise of the entire 5 1 channel range It may be monaural or stereo even if the sound track is recorded in Dolby Digital The sound comes from the centre speaker only gt Depending on the disc the sound may come from the centre speaker only Operation The controller does not function gt Make sure the controller is connected to the console gt Make sure the Analog Controller DUALSHOCKe2 or the Analog Controller DUALSHOCKo is set to the appropriate mode for the software see page 9 gt Try another set of controllers The software title does not start gt Make sure the inserted disc can be played with this console see page 3 gt Make sure the disc is placed with the label side facin
7. KH Press the SELECT button to j talian DNR ott show the Control Panel on the E a j DNR1 Dutc TV screen ene _ Portuguese Outline Sharpening m 2 FJ Select amp Setup using the j DVD Menu p English 1 directional buttons and press a rrenen o G the X button ae es ere The Setup display appears on the TV L spanish screen Dutch Display L On Off Danish EJ Select the category you want i f using the directional buttons E S Custom Setup pag 17 Norwegian Pause Mode _ Auto EJ Press the X button Le riaadess Ee The selected category is highlighted i Bory ous Russian Parental Control gt F Chinese E Select the item you want using le japanese the directional buttons L Language Options gt T Audio Setup page 18 KA Press the X button j Audio Gane as EYE Menu Audio Digital Out Subtitles Audio Follow After changing DVD settings L same as DVD Menu DIGITAL OUT OPTICAL To save your changes be sure to eject the DVD o BE before pressing the RESET button or n Dolby Digital TA turning off the unit with the MAIN POWER p Ott switch Please note that changes will not be DTS On saved if you reset or turn off the console off without first ejecting the DVD ae MPEG On Off Audio Track Auto Select Mode On Off DVD Volume 2 1 Standard o pIA GAG Settings and adjustme
8. PHET KI A K SZ L KB L VAKODJON A K ZVETLEN LEZERSUGARTOL 4 This label is located on the protective housing of the CD DVD unit inside the enclosure NOTICE FOR THE CUSTOMERS IN THE UNITED KINGDOM A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience Should the fuse in the plug supplied need to be replaced a 5 AMP fuse approved by ASTA or BSI to BS1362 i e marked with or Y mark must be used If the plug supplied with this equipment has a detachable fuse cover be sure to attach the fuse cover after you change the fuse Never use the plug without the fuse cover If you should lose the fuse cover please contact the appropriate PlayStation customer service helpline which can be found on the customer registration card within every PlayStation and PlayStation 2 format software manual Precautions Do not expose the console to cigarette smoke or dust When setting up the console avoid places subject to excessive cigarette smoke or dust Cigarette smoke residue or dust build up on internal components such as the lens may cause the console to malfunction Disc handling Do not leave discs near a heat source in direct sunlight or in high humidity e Store discs in their cases when they are not being used Stacking discs or standing them at an angle without putting them in their cases can cause the discs to warp e Do not touch the disc
9. Press SELECT Changing the audio language If the DVD is recorded with multilingual tracks you can select the language you want to hear when playing a DVD video The languages you can select are different depending on the DVD Select D Audio Options using the directional buttons and press the X button Each time you press the X button the language changes You can select Audio Options directly Press the R3 button on the controller when the Control Panel is not displayed Each time you press the button the language changes Notes Due to the programming on some DVDs you may not be able to change the languages even if multilingual tracks are recorded on the DVD e While playing the DVD the sound may be changed when you change the title Changing the angles With DVDs on which various angles multi angles for a scene are recorded you can change the angles For example while playing a scene of a train in motion you can display the view from either the front of the train the left window of the train or from the right window without having the train s movement interrupted Select Angle Options using the directional buttons and press the X button Each time you press the X button the angle changes Notes e The number of angles varies from disc to disc or from scene to scene The number of angles that can be changed on a scene is equal to the number of angles recorded for that scene e D
10. and press the X button The player starts playback from the point where you stopped the disc in step 1 To play from the beginning of the disc After step 1 select W Stop and press the X button The point where you stopped playing is cleared Select B gt Play and press the X button Notes e Resume Play may not be available on some DVDs Depending on where you stopped the disc the console may resume playback from a slightly different point e The point where you stopped playing is cleared when you open the disc tray you shift to standby mode by pressing and holding down the RESET button on the front of the console you turn the power off using the MAIN POWER switch on the back of the console you start playback after selecting a title or chapter O9PIA GAC GD Olpny awed Using various functions with the Control Panel Using the Control Panel You can enjoy various functions using the on screen menu Control Panel The possible functions are different depending on the disc EE Press the SELECT button The Control Panel appears on the TV screen WA Select the item you want using the directional buttons EJ Press the X button For details on each Control Panel display item see pages 13 and 14 You can select some items directly with the controller See page 11 Control Panel item list DVD Menu page 13 Some
11. contained within the symbol represents the region number of DVD players on which the disc can be played DVD videos that do not bear this symbol or that do not display the number 2 cannot be played_on your console DVDs with the label can also be played on this console If you attempt to play any other DVDs a message stating This disc cannot be played due to regional restrictions will appear on screen e Some DVDs that have no region code markings may still be subject to area restrictions and may not be playable on the console Note on playback operations of DVDs This console plays DVD video as originally designed by the software producers Some of the playback features of this console may not have been incorporated into the DVD video design As a result some playback features may not be available with certain DVD videos Please refer to the instructions supplied with your DVD video for details Specially shaped discs Do not use irregularly shaped CDs for example heart or star shaped CDs as they may cause the console to malfunction Table of contents li 4 Getting started X Q S A Connection ay Game Audio CD G C Y DVD video VA Additional information V WARNING Precautions Discs that can be played on PlayStatione2 Checking the package contents Positioning the console Connecting your PlayStation 2 to a TV set Connecting digital audio equip
12. extended period of time Turn the power off at the MAIN POWER switch on the back of the console and disconnect the AC power plug from the electrical socket Changing from one game to another There is no need to turn off the console when you want to change games 1 Press the amp button The disc tray opens 2 Remove the disc 3 Place a new disc in the disc tray 4 Press the amp button The disc tray closes 5 Press the RESET button briefly to reset Warning holding the RESET button down for any length of time may cause the console to go into standby mode After the start up screen screen or appears and the game begins 2 3 Tip With a multi disc game follow steps 1 through 4 to switch discs Refer to the software manual for details Using the Analog Controller Differences between the Analog Controller DUALSHOCK 2 and Analog Controller DUALSHOCKe Analog Controller DUALSHOCK 2 supplied sold separately e The Analog Controller DUALSHOCK 2 can be used with PlayStation 2 and PlayStation format software e You can switch between digital and analog modes When the controller is in analog mode the following buttons and sticks may operate in analog fashion depending on the features supported by the software title Refer to the software manual for details PlayStation 2 format software Directional buttons A O X O buttons left a
13. is protected by method claims of certain U S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation Reverse engineering or disassembly is prohibited Troubleshooting Please double check If you experience any of the following difficulties while using the console use this troubleshooting guide to help remedy the problem Should any problem persist please contact the appropriate PlayStatione customer service helpline which can be found on the customer registration card within every PlayStation and PlayStation 2 format software manual Make sure the AC power cord is connected to the console and the mains and the TV or VCR or the supplied accessories are connected to the console correctly Inrare instances certain DVD videos may not operate properly with PlayStationo2 This is primarily due to variations in the manufacturing process or software encoding of the DVD video software If you experience problems try restarting your DVD video If problems persist for more information call the publisher of the DVD video or contact the appropriate PlayStation customer service helpline which can be found on the customer registration card Power The power is
14. not turned on gt Make sure the AC power cord is connected securely gt The console is not turned on Turn on the console using the MAIN POWER switch on the back of the console Picture There is no picture gt Make sure the console is connected to the TV or VCR with the AV Cable integrated audio video gt Make sure the console and the TV or VCR are turned on gt Make sure you have selected the video input on the TV or VCR gt Make sure the AV Cable integrated audio video is connected securely gt Make sure the inserted disc can be played with this console see page 3 gt Make sure the disc is placed with the label side facing up when using a disc with a label gt The disc is not inserted correctly gt The console is in pause mode gt Try another set of AV Cables Picture noise appears gt Clean the disc gt Moisture has condensed inside the console see page 2 gt The console is placed on an unstable surface Place the console on a stable and flat surface Do not shake or vibrate the console gt If the video signal from the console has to go through the VCR to get to the TV the copy protection applied to some DVD videos could affect picture quality When playing a DVD video connect the console to the TV directly see page 4 The aspect ratio cannot be changed according to the TV when playing wide screen DVD videos gt Depending on the
15. the beginning when playing a disc gt Resume Play has been selected Press the Stop button before you start playing gt Depending on the disc a Title menu or a DVD menu automatically appears The disc does not play even if the DVD title is selected gt A Parental Control limit has been set on the disc Playback stops automatically gt The disc may contain an auto pause signal While playing such a disc the console stops playback at the signal You cannot perform some functions such as Stop Search or Slow motion Play gt Depending on the disc you may not be able to do some of the operations above The language for the sound track cannot be changed gt Multilingual tracks are not recorded on the DVD gt Changing the language for the track is prohibited on the DVD The subtitle language cannot be changed gt Multilingual subtitles are not recorded on the DVD gt Changing the language for the subtitles is prohibited on the DVD The subtitles cannot be turned off gt Depending on the DVD you may not be able to turn the subtitles off The angles cannot be changed when you play a DVD gt Multi angles are not recorded on the DVD gt Changing the angles is prohibited on the DVD General Power requirements 220 240 V AC 50 60 Hz Power consumption 50W Dimensions approx 301 x 78 x 182 mm w h d Mass approx 2 2 kg Operating Temperature 5 C 35 C Laser diode pr
16. the subtitles e Audio Follow English French German Italian Spanish Dutch Danish Swedish Finnish Norwegian Portuguese Russian Chinese Japanese Language Options When you select Language Options the language list is displayed Select the language from the list When you select Audio Follow the language for the subtitles changes according to the language you selected for the sound track After changing DVD settings To save your changes be sure to eject the DVD before pressing the RESET button or turning off the unit with the MAIN POWER switch Please note that changes will not be saved if you reset or turn off the console without first ejecting the DVD Setting your TV display mode Screen Setup Screen Setup allows you to set various options for your TV display The default settings are underlined Select Screen Setup in the Setup display E TV Type Selects the aspect ratio of the TV to be connected You can change this setting only when the DVD is stopped e 16 9 select this when you connect a wide screen TV or a TV that displays in wide mode to the console e 4 3 Letter Box select this when you connect a standard TV to the console Displays a wide picture with margins on the upper and lower portions of the screen e 4 3 PAN SCAN select this when you connect a standard TV to the console Displays the wide picture on the whole screen automatically an
17. viewing flashing lights or patterns in our daily environment These persons may experience seizures while watching TV or playing video games including DVD videos or games played on the PlayStation 2 console Players who have not had any seizures may nonetheless have an undetected epileptic condition Consult your physician before operating the PlayStation 2 console if you have an epileptic condition or experience any of the following symptoms while watching TV programs or playing video games altered vision muscle twitching other involuntary movements loss of awareness of your surroundings mental confusion and or convulsions CLASS 1 LASER PRODUCT LASER KLASSE 1 LUOKAN 1 LASERLAITE KLASS 1 LASERAPPARAT This appliance is classified as a CLASS 1 LASER product CAUTION VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID_EXPOSURE TO BEAM ADVARSEL SYNLIG OG USYNLIG LASERSTRALING VED BNING UNDG UDS TTELSE FOR STR LING VORSICHT SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG WENN ABDECKUNG GE FFNET NICHT DEM STRAHL AUSSETZEN VARO N KYV JA N KYM T N AVATTAESSA OLET ALTTIINA LASERSATEILYLLE ALA KATSO SATEESEEN VARNING SYNLIG OCH OSYNLIG_LASERSTRALNING NAR DENNA DEL AR PPNAD STRALEN AR FARLIG ADVARSEL SYNLIG OG USYNLIG LASERSTRALING NAR DEKSEL PNES UNNGA EKSPONERING FOR STR LEN FIGYELEM A BURKOLAT MEGBONTASAKOR L THAT ES L THATATLAN L ZERSUG R L
18. Control Region Select Region using the directional buttons then press the X button foes Custom Setup Parental Control Region 7 Select a geographic region to set the standard Parental Control level for that region using the directional buttons then press the X button fogu Custom Setup Parental Control Region England Select Level using the directional buttons then press the X button Custom Setup Parental Control Level Select the level you want using the directional buttons then press the X button cau Custom Setup Parental Control Level The lower the value the more strict the limitation To turn off the Parental Control function and play the DVD after entering your password Set Level to Off in step 7 then press the X button To change the password 1 dati After step 3 select Change Password using the directional buttons then press the X button The display for changing the password appears nise Follow steps 2 and 3 to enter a new password Playing a disc which is protected by Parental Control Alsa Insert the disc and press the START button The Parental Control display appears RN Enter your four digit password using the number buttons The player starts playback When you stop playing the DVD the Parental Control level returns to the original setting If you forget your password Press the SELECT button and
19. DUALSHOCK and AOKO are registered trademarks of Sony Computer Entertainment Inc SONY and dp are registered trademarks and MAGIC GATE is a trademark of Sony Corporation www playstation com Printed in Japan
20. DVDs allow you to select the disc contents using a menu When you play these DVDs you can select the language for the subtitles the language for the sound etc using the DVD menu im Title Menu page 13 A DVD is divided into long sections of a movie or a music feature called titles When you play a DVD which contains several titles you can select the title you want using the Title menu 2 gt Return page 13 You can return to the previous screen in the DVD menu or Title menu D Audio Options page 13 If the DVD is recorded with multilingual tracks you can select the language you want to hear while playing the DVD Angle Options page 13 With DVDs on which various angles multi angles for a scene are recorded you can select among the various angles available Subtitle Options page 13 With DVDs on which subtitles are recorded you can change the language whenever you want while playing the DVD and turn it on and off whenever you want A gt Go to Title page 14 You can select the number of the title you want to search for Sas Setup page 15 Using the Setup display you can do the initial setup adjust the picture and sound and set the various outputs You can also set a language for the subtitles and the Setup display limit playback by children and so on 10 Chapter Disp
21. IGITAL OUT OPTICAL connector e On when the console is connected to audio equipment with a built in DTS decoder If the console is connected to audio equipment without a built in DTS decoder do not turn this option on Otherwise when you play the DTS sound track a loud noise or no sound will come out from the speakers possibly hurting your ears or damaging the speakers e Off when the console is connected to audio equipment without a built in DTS decoder E MPEG Selects the MPEG AUDIO signals to be output via the DIGITAL OUT OPTICAL connector e On when the console is connected to audio equipment with a built in MPEG decoder If the console is connected to audio equipment without a built in MPEG decoder do not turn this option on Otherwise when you play the MPEG sound track a loud noise or no sound will come out from the speakers possibly hurting your ears or damaging the speakers e Off when the console is connected to audio equipment without a built in MPEG decoder E Audio Track Auto Select Mode Gives the sound track which contains the highest number of channels priority when you play a DVD on which multiple audio formats PCM DTS Dolby Digital or MPEG AUDIO format are recorded e On priority given e Off no priority given Notes e When you set this item to On the language may change depending on the Audio settings in Language Setup The Audio Track Auto Select Mode
22. NK connector on your console supports transfer rates up to 400 Mbps However the transfer rate will vary depending upon the actual transfer rate of the connected i LINK compatible device 400 i LINK connector Note Not all i LINK products work with the PlayStation 2 computer entertainment system Refer also to the appropriate i LINK product s user manual for more information i LINK is a trademarked version of the IEEE 1394 1995 standard and its revisions i LINK and the i LINK logo are trademarks Connecting a device using the Universal Serial Bus USB interface The Y USB connector on the front of the console can be used to connect a USB compatible device Also refer to the instructions supplied with the device to be connected Y USB connector Note Not all USB compatible products work with the PlayStation 2 computer entertainment system See the appropriate USB compatible product s user manual for more information Using the Main menu When turning on the console without first inserting a disc the Main menu appears on the TV screen Browser fem Configuration Enter amp Version You can move to the System Configuration menu or the browser screen from the Main menu Using the System Configuration menu Using the System Configuration menu you can access the system setup for your PlayStatione2 console These settings are not cancel
23. SONY PlayStation Instruction Manual Thank you for purchasing the PlayStatione2 computer entertainment system You can play PlayStatione2 format CD ROM and DVD ROM discs PlayStation format CD ROM discs audio CDs and DVD video discs with this console Before operating this console please read this manual carefully and retain it for future reference diss Goo EY Ye DIGITAL SCPH 30003 R 2001 Sony Computer Entertainment Inc All rights reserved eyP VIDEO 3 071 581 33 1 MEMORY CARD slots product family logo standby RESET button and indicator amp open button and indicator Disc tray Controller ports L2 button R2 button L1 button R1 button Directional buttons A O X LU buttons START button ANALOG mode button SELECT button Left analog stick right analog stick L3 button R3 button lle To prevent fire or shock hazard do not expose the console to rain or moisture To avoid electrical shock do not open the cabinet Refer servicing to qualified personnel only Caution The use of optical instruments with this product will increase eye hazard As the laser beam used in this unit is harmful to eyes do not attempt to disassemble the cabinet Refer servicing to qualified personnel only Read carefully before operating your PlayStatione2 A few people may experience epileptic seizures when
24. TICAL connector using an optical digital cable For connection details see page 6 You cannot adjust Dolby Digital DTS and MPEG if you set DIGITAL OUT OPTICAL to Off E DIGITAL OUT OPTICAL Selects whether to output signal via the DIGITAL OUT OPTICAL connector The item that you have selected in the System Configuration menu will be the current setting here e On select this when you connect with an optical digital cable sold separately Normally select this option When you select On you can set Dolby Digital DTS and MPEG e Off select this when you do not want sound signal to be output via the DIGITAL OUT OPTICAL connector Note When you select Off you cannot set Dolby Digital DTS and MPEG E Dolby Digital Selects the Dolby Digital signals to be output via the DIGITAL OUT OPTICAL connector e On when the console is connected to audio equipment with a built in Dolby Digital decoder If the console is connected to audio equipment without a built in Dolby Digital decoder do not turn this option on Otherwise when you play the Dolby Digital sound track a loud noise or no sound will come out from the speakers possibly hurting your ears or damaging the speakers e Off when the console is connected to audio equipment without a built in Dolby Digital decoder E DTS Selects the DTS signals to be output via the D
25. ay not be able to do some of the operations described Locating a point quickly Search 1 While a disc is playing select 5 Search forward or amp Search backward using the directional buttons 2 Keep the X button pressed until you locate the point you are looking for When you find the point you want release the button to return to normal playback speed You can also use the direct buttons Press the R2 forward or L2 backward buttons on the controller when the Control Panel is not displayed Locating a point slowly by watching the screen Slow motion play 1 While a disc is playing select j Slow using the directional buttons 2 Press the X button Slow motion playback starts When you find the point you want select B Play and press the X button to return to the normal speed You can also resume playback by pressing the START button Settings and adjustments for the DVD Player Using the Setup display Setup display item list Using the Setup display you can change the The default settings are underlined initial settings adjust the picture and sound and set various other output options You can A Language Setup page 16 CI Screen Setup page 18 also choose a language for subtitles limit i L TV Type 16 9 playback by children and so on cer English yp PES French 4 3 Letter Box German 4 3 PAN SCAN
26. change when you change the title o pIA GAG Using various functions with the Control Panel continued Searching for a title You can select the number of the title you want to search for using the number buttons 1 Select gt Go to Title using the directional buttons and press the X button Go to Title appears on the TV screen 2 Use the number buttons to enter a 2 digit title number The player starts playback at the selected title Displaying information while playing a disc While playing a disc you can check the current title number and current chapter number on the TV screen Select E Chapter Display using the directional buttons and press the X button Each time you press the X button you can turn the display on and off Displaying the list of the direct buttons The list of the direct buttons on the controller can be displayed on the TV screen Select Help using the directional buttons and press the X button To turn off the list Press the X button Searching for a chapter You can select the number of the chapter you want to search for using the number buttons Use the number buttons to enter a 2 digit chapter number The player starts playback at the selected chapter Searching for a particular point on a disc You can locate a particular point on a disc quickly by monitoring the picture or playing back slowly Note Depending on the DVD you m
27. check the version of the console browser CD player PlayStatione Driver and DVD player Press the A button in the Main menu Auto diagnosis function The PlayStation 2 console automatically adjusts console settings for best possible disc playback However you can also manually start the auto diagnosis feature whenever necessary 1 Select Console using the up and down directional buttons and press the A button 2 Select On using the up and down directional buttons and press the X button 3 Insert a disc The console automatically starts the diagnosis Note The diagnosis setting automatically returns to Off default setting when you press the RESET button or start playing a PlayStation format disc PlayStatione2 format disc or a DVD video disc Setting the PlayStation Driver The PlayStation Driver is a programme for loading PlayStatione format software 1 Select PlayStation Driver using the up and down directional buttons and press the A button 2 Select the item you want using the up and down directional buttons and press the X button Disc Speed e Standard normally select this position e Fast loading time for a PlayStation format software disc can be shortened Depending on the software there may be no effect or the software may unexpectedly fail In this case select Standard Texture Mapping Standard normally select this position
28. d cuts off the portions that do not fit 16 9 4 3 Letter Box 4 3 PAN SCAN Note With most DVDs the picture is automatically output in a predetermined aspect ratio E DNR Digital Noise Reduction If the playback picture has noise or interference set this item to DNR1 or DNR2 e Off normally select this position e DNRI1 makes the picture clear by reducing noise e DNR2 makes the picture even clearer by reducing noise Notes e When you select DNR2 an afterimage may appear In this case select Off Depending on the DVD the DNR function may produce limited results E Outline Sharpening Makes the outline of the picture sharpened or softened The higher the value the sharper the outline e 2 e 1 0 normally select this position e 1 e 2 E Display Displays or turns off the playing status information on the TV screen On when you operate the DVD player the playing status appears for a few seconds on the TV screen e Off the playing status is not displayed After changing DVD settings To save your changes be sure to eject the DVD before pressing the RESET button or turning off the unit with the MAIN POWER switch Please note that changes will not be saved if you reset or turn off the console without first ejecting the DVD Custom settings Custom Setup Custom Setup allows you to set the playback conditions The defaul
29. data is recorded in Dolby Digital as well as in PCM allowing you to enjoy a more real audio presence Furthermore various advanced functions such as the multi angle multilingual and Parental Control functions are provided with the DVD MPEG AUDIO page 18 International standard coding system to compress audio digital signals authorised by ISO IEO Multi angle function page 13 Various angles for the scene viewpoints of the video camera are recorded on some DVDs Multilingual function page 13 Several languages for the audio track or subtitles in a picture are recorded on some DVDs Parental Control page 17 A function of the DVD used to limit playback of the disc according to the age of the user and the limitation level in each country The limitation varies from disc to disc when it is activated playback can be completely prohibited violent scenes are skipped or replaced with other scenes and so on Title page 13 The longest section of a movie or a music piece on a DVD a movie etc for a picture piece on video software or an album etc for a music piece on audio software Each title is assigned a title number enabling you to locate the title you want GUARANTEE GUARANTEE Thank you for buying this Product Sony Computer Entertainment Europe SCEE will for a period of 1 one year from the date of original purchase repair or at SCEE s option replace any component part of this Pro
30. ding to the instructions in this manual No authorisation for the analysis or modification of the PlayStation 2 console nor the analysis and use of its circuit configurations is given e There are no user serviceable components inside the PlayStation 2 console Disassembling it will void the guarantee Additionally there is a risk of exposure to laser radiation as well as to electrical shock hazards Notes on safety when using the Analog Controller DUALSHOCK 2 and Analog Controller DUALSHOCKe e Stop using the console immediately if you begin to feel tired or if you experience an unpleasant sensation or pain in your hands and or arms while operating the controller If the condition persists consult a doctor Do not attempt to operate the controller in any way except with your hands Do not bring the controller into close contact with your head face or near the bones of any other part of your body e The vibration function of the Analog Controller DUALSHOCK 2 or the Analog Controller DUALSHOCK can aggravate injuries Do not use the vibration function of the Analog Controller DUALSHOCK 2 and Analog Controller DUALSHOCK supported by software if you have any ailment in the bones or joints of your hands or arms e Do not use the Analog Controller DUALSHOCK 2 or the Analog Controller DUALSHOCK with software that supports the vibration function if you have injuries or ailments to the bones or muscles of you
31. disc the aspect ratio is fixed gt Make sure the console is connected to the TV directly The selector or receiver amplifier may not be connected between the console and the TV gt Depending on the TV the aspect ratio is fixed Sound There is no sound gt Make sure the console is connected to the TV or VCR with the AV Cable integrated audio video Make sure the console and the TV or VCR are turned on Make sure you have selected the video input on the TV or VCR Make sure the TV volume is set properly or mute is not selected on the TV Make sure the AV Cable integrated audio video is connected securely Make sure the inserted disc can be played with this console see page 3 Make sure the disc is placed with the label side facing up when using a disc with a label Make sure you have connected the console to the audio input connectors on the receiver amplifier correctly Try another set of AV Cables Check the speaker connections and settings Refer to the operating manual of your receiver amplifier gt Make sure you select the appropriate input on the receiver amplifier so that you can listen to sound from the console The console is in pause mode The console is in search slow motion mode when playing a DVD video gt The system setting is not correct for when the console is connected to audio equipment with DIGITAL OUT OPTICAL connectors see page
32. duct free of charge where it is faulty due to defective materials or workmanship Replacement will be with a new or refurbished component or unit at SCEE s option This Guarantee is in addition to your statutory consumer rights under applicable law and does not affect them in any way IMPORTANT 1 If you need to claim under this Guarantee please call your local Customer Service Helpline listed on the Customer Registration Card and ina current software manual for return instructions and other guidance 2 This Guarantee is only valid i in the UK and Ireland ii when the original sales receipt or invoice indicating the date of purchase and retailer s name is presented together with the faulty Product and has not been altered or defaced since the date of original purchase iii when the Guarantee seal on the Product has not been damaged or removed 3 You may not claim under this Guarantee when the Product is damaged as a result of i commercial use accident fair wear and tear or misuse including without limitation failure to use this Product for its normal purpose and or in accordance with instructions on proper use and maintenance or installation or use in a manner inconsistent with applicable local technical or safety standards ii use in conjunction with any unauthorised peripheral including without limitation game enhancement devices adaptors and power supply devices iii any adaptatio
33. e black margins on the upper and lower portions of the screen are cut off e 16 9 select this when you connect a wide screen TV or a TV that displays in wide mode to the console E DIGITAL OUT OPTICAL Selects whether to output signal via the DIGITAL OUT OPTICAL connector e On select this when you connect with an optical digital cable sold separately Normally select this option Off select this when you do not want sound signal to be output via the DIGITAL OUT OPTICAL connector E Component Video Out If your TV monitor or projector has a RGB input connector or component video input connectors Y CB PB Cr PR that conform to the output signals of the console set this item When connecting the console using the supplied AV Cable integrated audio video or S VIDEO Cable sold separately you do not need to set this item e Y Cb Pb Cr Pr select this when you connect the console to the component video input connectors on your TV e RGB select this when you connect the console to the RGB input connector on your TV Note You can output PlayStation and PlayStation 2 format software in either RGB or Y Cb Pb Cr Pr format However the PlayStation 2 console has been designed to override the Component Video Out setting in the System Configuration menu and output all DVD video software in Y Cb Pb Cr Pr The colour is disturbed when you set this item to RGB and play the DVD E Language
34. enter the four digit number 7444 whenever the Parental Control display asks you for your password The old password is deleted Notes When you play DVDs which do not have the Parental Control function playback cannot be limited on this player If you do not set a password you cannot change the settings for Parental Control Depending on the DVD you may be asked to change the Parental Control level while playing the disc In this case enter your password then change the level When you stop playing the DVD the Parental Control level returns to the original setting After changing DVD settings To save your changes be sure to eject the DVD before pressing the RESET button or turning off the unit with the MAIN POWER switch Please note that changes will not be saved if you reset or turn off the console without first ejecting the DVD o p IA GAG Settings and adjustments continued Audio Settings Audio Setup Audio Setup allows you to adjust your audio settings according to the playback conditions The default settings are underlined Select Audio Setup in the Setup display E Audio Digital Out Switches the methods of outputting audio signals when you connect with equipment like the following e Digital equipment such as a receiver amplifier with a digital connector e Audio equipment with a built in decoder Dolby Digital DTS or MPEG e A DAT or MD player via the DIGITAL OUT OP
35. es and do not knock the console or its accessories against other objects When carrying the console do not subject it to any type of violent physical shock This may damage the disc or cause the console to malfunction Avoid damaging the exterior of the console Do not apply any solvents and do not place any rubber or vinyl materials on the surface of the console for an extended period of time Doing so may damage the plastic surface or cause the paint to peel off Cleaning the exterior of the console When cleaning the exterior of the console be sure to turn the power off with the MAIN POWER switch on the back of the console and disconnect the AC power plug from the electrical socket e Ifthe exterior of the console becomes dirty soak a soft cloth in a mild detergent solution diluted with water tightly squeeze the cloth to remove the excess liquid wipe the affected area of the exterior and finish by wiping with a dry cloth Do not use benzene or paint thinner to clean the exterior of the console since these may damage the surface or cause the paint to peel off When using a chemically treated dust cloth follow the usage instructions supplied with it Dust can accumulate in both the front and rear vents of the console Check the vents from time to time and remove any accumulated dust with a handheld or low powered vacuum cleaner Never disassemble the console Use your PlayStation 2 computer entertainment system accor
36. g up when using a disc with a label gt Make sure the disc is inserted correctly gt Moisture has condensed on the disc see page 2 gt Clean the disc gt Try another copy of the disc You cannot save data on the Memory Card 8MB for PlayStatione2 or Memory Card gt Make sure the Memory Card 8MB for PlayStation 2 or Memory Card is inserted securely gt Make sure you are playing the game correctly Refer to the appropriate software manual gt Make sure there are empty blocks on the Memory Card 8MB for PlayStation 2 or Memory Card gt Try another Memory Card 8MB for PlayStation 2 or Memory Card UOeUOJU jeuorppy OaPIA GAG Troubleshooting continued Specifications The console does not function properly gt Static electricity etc may affect the console s operation Turn off the MAIN POWER switch and then turn it back on indicator flashes in red and the console does not work gt A flashing red light indicates a console fault condition and the unit will not operate Remove any obstructions from the vents to allow the console to cool down Resume play after the console returns to standby mode The disc tray does not open gt Make sure the AC power cord is connected securely gt Make sure the console is turned on Turn on the console using the MAIN POWER switch on the back of the console DVD video operation The console does not play from
37. he disc tray opens EJ Place a disc on the disc tray with the playback side facing down E Press the button The disc tray closes and the console starts playback Notes e Depending on the DVD a DVD menu or Title menu may appear on the TV screen see page 13 e If you press the amp button after playback the browser screen appears Operating the DVD player directly with a controller You can operate the DVD player directly with the buttons on a controller when the Control Panel page 12 is not displayed You can also operate the DVD player using the DVD Remote Control for PlayStation 2 sold separately For detailed instructions refer to the instruction manual supplied with the SCPH 10172 DVD Remote Control for PlayStation 2 with IR Receiver Unit This console is equipped with DVD Player software that is compatible with the DVD Remote Control for PlayStation 2 You can use the DVD Remote Control for PlayStation 2 simply by inserting the IR receiver unit supplied with the DVD Remote Control into a controller port of the console No Memory Card 8MB for PlayStation 2 is required when using the DVD Remote Control for PlayStation 2 with this console R2 button D Search Page 14 L2 button amp Search Page 14 L1 button k lt Previous R1 button PI Next a z fama men DVD Menu oo y age SK o AD O button Cancel W Stop Cursor Control OJ O A NINI Directional butt
38. image caution Static non moving images such as DVD menus configuration displays or images paused may leave a faint image permanently on the TV screen if left on for extended periods of time Projection TVs are more susceptible to this than other types of displays Do not operate the console in such a manner that this could occur lies within the television If you encounter such a problem with your television monitor please contact the appropriate PlayStation customer service helpline which can be found on the customer registration card within every PlayStation and PlayStation 2 format software manual a TV set Connecting to a VCR Connect your PlayStation 2 console to your VCR using the supplied AV Cable integrated audio video matching the plug colours to the jacks on the VCR A tf your VCR is monaural do not connect the When playing a DVD video red plug However when playing a DVD video do not VCR connect the console to a VCR If you do the colour is disturbed Connect the console g directly to the TV After connecting Set your TV and VCR adjustments appropriately Refer to the instruction manuals for your TV and VCR PlayStation 2 console Connect directly Connecting to a TV with an S VIDEO input connector Connect your PlayStation 2 console to the S VIDEO input connector on the TV using the SCPH 10060 E S VIDEO Cable sold separately for a higher quality
39. lay page 14 While playing a disc you can check the current title number and current chapter number on the TV screen Help page 14 The list of the direct buttons on the controller is displayed on the TV screen Go to Chapter page 14 Number buttons You can select the number of the chapter you want to search for Hea Previous You can go back to the preceding chapter in continuous play mode Ee Search page 14 You can locate a particular point on the DVD quickly by monitoring the picture gt P Next You can go to the next chapter in continuous play mode w Play H Pause E Stop J gt Slow page 14 You can locate a point on the DVD slowly by watching the screen Using the DVD menu Some DVDs allow you to select the disc contents using a menu When you play these DVDs you can select the language for the subtitles the language for the sound etc using the DVD menu 1 Select Y DVD Menu using the directional buttons and press the X button The DVD menu appears on the TV screen The contents of the menu vary from disc to disc 2 Press the directional buttons to select the item you want to change 3 To change other items repeat step 2 4 Press the X button You can display the DVD menu directly Press the A button on the controller when the Control Panel is not displayed If you want to select the language for the DVD menu You can change this setting by choosing Lang
40. led even if you turn off the console 1 Select System Configuration using the up and down directional buttons and press the X button The System Configuration menu appears on the TV screen 2 Select the item you want using the up and down directional buttons and press the X button The default settings are underlined E Clock Adjustment Sets the clock 1 Use the up and down directional buttons to set the day and then press the right directional button Use the same method to set the month year hour minute and second To return to the previous menu press the left directional button 2 Press the X button in time with an accurate clock You can select optional settings for the clock Select Clock Adjustment using the up and down directional buttons and press the A button You can set the optional items Time Format e 24 hour clock e 12 hour clock Date Format DD MM YYYY eYYYY MM DD e MM DD YYYY Time Zone Select your country or region to set the time zone Daylight Savings Time Summer Time Set this item to Daylight Savings Time Summer Time when the daylight savings time is in effect e Standard Winter Time Daylight Savings Summer Time E Screen Size Selects the display mode according to the TV to be connected e 4 3 select this when you connect a standard TV to the console e Full select this when you connect a standard TV to the console Th
41. log Controller DUALSHOCKe both feature a vibration function when the function is supported by the software title The vibration function can be set to ON or OFF on the software option screen Notes e When the Analog Controller DUALSHOCK 2 and Analog Controller DUALSHOCK is not being used turn the console off or unplug the controller from the console e Before using the vibration function please read Notes on safety when using the Analog Controller DUALSHOCK 2 and Analog Controller DUALSHOCK on page 2 Before using the Analog Controller DUALSHOCKe2 and Analog Controller DUALSHOCKe Rotate the analog sticks once with your thumbs as if drawing a circle as shown in the diagram above Do not twist the analog sticks Analog mode indicator red L1 button R1 button A button Directional O button buttons X button Left analog stick O button g L3 button Mode indicator Off L2 button ANALOG mode button R2 button R1 button SELECT START button button A button O button X button button Right analog stick R3 button Mode indicator Red The R3 button and the L3 button function when the stick is pressed q olpny awed Using Memory Cards You can save and load game or other data using the Memory Card 8MB for PlayStation 2 or Memory Card each sold separately Differences between the Memory Card 8MB for PlayStation 2 and Memory Card
42. ment Connecting other digital devices Using the Main menu Playing a game Using the Analog Controller Using Memory Cards Playing an audio CD Playing a DVD video Using various functions with the Control Panel Settings and adjustments for the DVD Player Troubleshooting Specifications Glossary GUARANTEE Check that you have the following items Console e Instruction manual You can position the console either horizontally or vertically When positioning the console vertically use the SCPH 10040 E Vertical Stand for PlayStation 2 sold separately When positioning the console horizontally you can use the SCPH 10110 E Horizontal Stand for PlayStation 2 sold separately LS Ith Horizontal positioning Vertical positioning AC power cord Notes The console may be damaged if it is placed in any position other than a horizontal or vertical one Do not change the position of the console from horizontal to vertical or vice versa while it is in operation Doing so may damage the disc or cause the console to malfunction The 2 product family logo located on the disc tray The A product family logo on the disc tray can be rotated to match the horizontal or vertical positioning of the console Mes i o i 2 oo oma Connecting your PlayStatione2 to This section explains the connecting method for listening to sound through your TV speaker
43. n or adjustment to or alteration of this Product carried out for any reason and whether properly carried out or not iv maintenance or repairs carried out other than by an authorised service facility 4 Where permitted under applicable law this Guarantee will be your sole and exclusive remedy for breach of any warranty guarantee or condition express or implied in respect of this Product and neither SCEE nor any other Sony entity or their suppliers or authorised service facilities will be liable for any incidental or consequential loss or damage If this Product needs any repair which is not covered by this Guarantee please call your local Customer Service Helpline for advice If your home country is not one of those listed please contact your retailer Please complete and return the enclosed Freepost Customer Registration Card UOIJEWIOjU EUOHIPpY SONY dl gt COMPUTER ENTERTAINMENT A limited number of PlayStation format software titles may not play or play differently on the PlayStation 2 computer entertainment system This is primarily due to design variations in PlayStation format software For further information on individual software titles please contact the appropriate PlayStation customer service helpline which can be found on the customer registration card within every PlayStation and PlayStation 2 format software manual PlayStation _
44. nalog stick right analog stick L1 R1 L2 R2 buttons PlayStation format software Left analog stick right analog stick e You can enjoy the vibration function Analog Controller DUALSHOCK sold separately e The Analog Controller DUALSHOCK can be used with PlayStation 2 and PlayStation format software Digital mode indicator off L2 button L1 button SELECT START button button Directional buttons ANALOG mode button R2 button e You can switch between digital and analog modes When in analog mode you can enjoy the analog operation of the left analog stick and right analog stick PlayStation 2 format software Left analog stick right analog stick PlayStation format software Left analog stick right analog stick e You can enjoy the vibration function Mode switching and the mode indicator The Analog Controller DUALSHOCK 2 and Analog Controller DUALSHOCKe can be switched between digital mode and analog mode by pressing the ANALOG mode button Each time the ANALOG mode button is pressed the mode changes as follows Digital mode indicator off a Analog mode indicator red Note Switch to the appropriate mode for use Note however that some software makes this adjustment automatically In such cases the ANALOG mode button is overridden by the software For details refer to the software manual Vibration function The Analog Controller DUALSHOCK 2 and Ana
45. nt with a built in DTS decoder Set DIGITAL OUT OPTICAL to On and then set DTS to On in the Audio Setup display e When you connect audio equipment with a built in Dolby Digital decoder Set DIGITAL OUT OPTICAL to On and then set Dolby Digital to On in the Audio Setup display e When you connect audio equipment with a built in MPEG decoder Set DIGITAL OUT OPTICAL to On and then set MPEG to On in the Audio Setup display Note Refer to the operating and setup instructions for the audio equipment to be connected DTS and DTS Digital Out are trademarks of Digital Theater Systems Inc Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Confidential unpublished works 1992 1997 Dolby Laboratories All rights reserved Connecting other digital devices Connecting a device using the i LINK interface The 400 i LINK connector on the front of the console can be used to connect an i LINK compatible IEEE 1394 device Refer also to the instructions supplied with the device to be connected The S400 i LINK connector does not supply power to external devices Some external devices that require power from the 400 i LINK connector will not function properly when connected to your PlayStatione2 console The PlayStation 400 i LI
46. nts continued Setting the display language or sound track Language Setup Language Setup allows you to choose among various languages for the on screen display or sound track The default settings are underlined Select Language Setup in the Setup display Notes e When you select a language that is not recorded on the DVD one of the recorded languages is automatically selected for the DVD Menu Audio and Subtitles settings Depending on the DVD the console may not start playing the language you have selected in the DVD Menu Audio or Subtitles E OSD Selects the language for the on screen display e English e French e German e Italian e Spanish e Dutch e Portuguese E DVD Menu Selects the language for the DVD menu e English e French e German e Italian e Spanish e Dutch e Danish e Swedish e Finnish e Norwegian e Portuguese e Russian e Chinese e Japanese e Language Options When you select Language Options the language list is displayed Select the language from the list E Audio Selects the language for the sound track e English French German Italian Spanish Dutch Danish Swedish Finnish Norwegian Portuguese Russian Chinese Japanese Language Options When you select Language Options the language list is displayed Select the language from the list E Subtitles Selects the language for
47. o the instruction manual of your TV To AV MULTI OUT connector To Euro AV connector Note Euro AV Cable supports the video output of PlayStation 2 and PlayStation format software only Important When viewing DVD videos on your PlayStation 2 use another cable which supports PlayStation 2 format video output for example AV Cable integrated audio video RFU Adaptor or S VIDEO Cable When turning on the console for the first time The initial setup screen appears Set Language Time Zone and Daylight Savings Time Summer Time according to the instructions on the screen Select language S lectionnez la langue Sprache w hlen Elija idioma Seleziona lingua Seleccionar um idioma Kies taal Settings can be adjusted later in the System Configuration menu For details see Using the System Configuration menu on page 7 Enter uol J9UUO Connecting digital audio equipment This section explains how to connect your PlayStation 2 console to audio equipment with digital connectors such as Dolby Digital optical AC 3 output Using digital receivers and amplifiers you can enjoy features such as multi channel sound and surround sound Connecting to a receiver or amplifier MD Minidisc deck or DAT Digital Audio Tape deck with a digital connector Hook up a commercially available optical digital cable to your audio equipment In the System C
48. onfiguration menu set the DIGITAL OUT OPTICAL setting to On This is the default setting For details on the System Configuration menu see page 7 Rear panel Receiver or amplifier MD deck or DAT deck DIGITAL INPUT OPTICAL zi na PORNEA AV MULTI OUT Notes Refer also to the instructions supplied with the equipment to be connected e You cannot directly make digital audio recordings of discs recorded in Dolby Digital DTS or MPEG AUDIO format using an MD or a DAT deck Connecting to audio equipment with a built in DTS Dolby Digital or MPEG decoder DVD video only By connecting to audio equipment with a built in DTS Dolby Digital or MPEG decoder sold separately you can playback sound recorded on your DVD video in Dolby Digital AC 3 DTS or MPEG AUDIO format to reproduce the effect of listening in a movie theatre or concert hall Connect the equipment via the DIGITAL OUT OPTICAL connector using an optical digital cable sold separately PlayStation 2 console Optical digital cable sold separately Audio equipment with a built in DTS y Dolby Digital or MPEG decoder Speakers Setups for the DVD player on your PlayStation 2 console Some setup adjustments are necessary for the DVD player depending on the equipment to be connected For details on using the Setup display see page 15 e When you connect audio equipme
49. ons X button Enter button Title Menu Page 13 R3 button D Audio Options Page 13 L3 button Subtitle Options Page 13 SELECT button Display the Control Panel Page 12 START button b gt Play H Pause When using a controller without the L3 or R3 button you can select the Subtitle Options function or the D Audio Options function using the Control Panel see page 12 To Operation Stop Press the O button Pause Press the START button Resume play after pause Press the START button Go to the next chapter in continuous play mode Press the R1 button Go back to the preceding chapter in continuous Press the L1 button twice play mode You can enjoy various functions using the on screen menu Control Panel For Control Panel operations see page 12 Resuming playback from the point where you stopped the disc Resume Play The player remembers the point where you stopped the disc and you can resume playback from that point 1 While playing a disc press the O button to stop playback Press Play to resume viewing To start from the beginning press Stop and then Play appears and then the Control Panel page 12 is displayed on the TV screen If the message Resume function cannot be used here Play will restart from the beginning appears Resume Play is not available 2 Select Play using the directional buttons
50. operties e Material GaAlAs e Wavelength 1 650 780 nm Inputs outputs on the console front Controller port 2 MEMORY CARD slot 2 Y USB connector 2 S400 i LINK connector 1 Inputs outputs on the console rear AV MULTI OUT connector 1 DIGITAL OUT OPTICAL connector 1 EXPANSION BAY 1 Supplied accessories See page 4 Optional accessories SCPH 110 E Analog Controller DUALSHOCK SCPH 1020 E Memory Card SCPH 1090 E Mouse SCPH 10010 E Analog Controller DUALSHOCK 2 SCPH 10020 E Memory Card 8MB for PlayStation 2 SCPH 10030 E AV Cable integrated audio video SCPH 10040 E Vertical Stand for PlayStation 2 SCPH 10060 E S VIDEO Cable SCPH 10072 B RFU Adaptor SCPH 10090 E Multitap for PlayStation 2 SCPH 10100 E Component AV Cable for PlayStation 2 SCPH 10110 E Horizontal Stand for PlayStation 2 SCPH 10130 E AV Adaptor with S VIDEO OUT connector SCPH 10142 Euro AV Cable SCPH 10172 DVD Remote Control for PlayStation 2 with IR Receiver Unit Design and specifications are subject to change without notice Glossary Chapter page 14 Sections of a movie or a music piece on a DVD that are smaller than titles A title is composed of several chapters Each chapter is assigned a chapter number enabling you to locate the chapter you want Dolby Digital page 18 Digital audio compression technology developed by Dolby Laboratories This technology conforms to 5 1 channel sur
51. picture L After connecting Set your TV to the appropriate video input mode such as S VIDEO To AV MULTI OUT connector 00 To S VIDEO input To audio input right To audio input left Connecting to a TV with an aerial input Connect your PlayStation 2 console to the aerial input on the TV using the SCPH 10072 B RFU Adaptor sold separately In this case the sound will be monaural After connecting Tune your TV to channel 36 To AV MULTI OUT connector To aerial input Connecting to a TV with a Euro AV connector using the Euro AV connector plug Connect your PlayStation 2 console to the Euro AV connector SCART on the TV using the Euro AV connector plug and AV Cable integrated audio video making sure you match the colour coded plugs of the AV Cable to the matching jacks of the connector plug To Euro AV connector To AV MULTI OUT connector After connecting Set your TV to the appropriate video input mode Refer to the instruction manual of your TV Connecting to a TV with a Euro AV connector using the Euro AV Cable You can improve picture quality by using the Euro AV Cable SCPH 10142 sold separately Connect your PlayStation 2 console to the Euro AV connector on the TV After connecting Set your TV to the appropriate video input mode Refer t
52. r fingers hands wrists or arms The vibration of the controller may aggravate such conditions e Avoid prolonged use of the Analog Controller DUALSHOCK 2 and Analog Controller DUALSHOCK Take a break at about 30 minute intervals Discs that can be played on PlayStatione2 PlayStatione2 format PlayStatione2 format PlayStation format DVD ROM CD ROM CD ROM Disc logo PlayStatione2 logo lt P PlayStatione2 logo PlayStatione logo and and PAL and PAL PAL designation designation designation Disc colour Silver Blue Black Contents Audio and video Disc size 12cm Audio CDs DVD videos Disc logo ecient DIGITAL AUDIO VIDE o The DVD VIDEO logo is a trademark Contents Audio Audio and video Disc size 12 cm 8 cm 12 cm 8 cm CD single Play time 74 min 20 min About 4 hrs About 80 min single sided single sided about 8 hrs about 160 min double sided double sided When you position the console vertically and play an 8 cm audio CD be sure to use an optional adaptor DVD video systems and regional restrictions e This console conforms to the PAL broadcast standard You cannot play discs recorded for other broadcast standards such as NTSC on this console unless the NTSC disc displays the label and an NTSC compatible TV is used e Some DVD videos are marked with region numbers such as B The number
53. round sound The rear channel is stereo and there is a discrete subwoofer channel in this format Dolby Digital provides the same 5 1 discrete channels of high quality digital audio found in Dolby Digital cinema audio systems Good channel separation is realised because all of the channel data is recorded discretely and processed in digital DTS page 18 Digital audio compression technology that Digital Theater Systems Inc developed This technology conforms to 5 1 channel surround sound The rear channel is stereo and there is a discrete subwoofer channel in this format DTS provides the same 5 1 discrete channels of high quality digital audio Good channel separation is realised because all of the channel data is recorded discretely and processed in digital DVD page 3 A disc that contains up to 8 hours of moving pictures even though its diameter is the same asa CD The data capacity of a single layer and single sided DVD is 4 7 GB which is 7 times that of a CD The data capacity of a dual layer and single sided DVD is 8 5 GB a single layer and double sided DVD is 9 4 GB and a dual layer and double sided DVD is 17 GB The picture data uses the MPEG 2 format one of the worldwide standards of digital compression technology The picture data is compressed to about 1 40 of its original size The DVD also uses a variable rate coding technology that changes the data to be allocated according to the status of the picture Audio
54. s If you wish to connect to audio equipment with digital connectors see Connecting digital audio equipments on page 6 Connecting to a TV with audio video input Connect your PlayStation 2 computer entertainment system to the TV using the supplied AV Cable integrated audio video When connecting the cords be sure to match the colour coded cords to the appropriate jacks on the equipment yellow video to yellow red right audio to red and white left audio to white After connecting Set your TV to the appropriate video input mode Refer to the instruction manual for your TV When connecting to a wide screen TV 16 9 aspect ratio Set Screen Size in the System Configuration menu to 16 9 For details on the System Configuration menu see page 7 If your TV is monaural Do not connect the red plug If you want to hear both left and right sounds from a monaural TV use a commercially available dual phono to single phono stereo to monaural type audio cable sold separately EXPANSION BAY MAIN POWER switch Pe connector AC IN connector To AV MULTI OUT connector To the mains AV Cable integrated audio video AC power cord Note about bouncing effect Some TVs or monitors may experience a bouncing effect in their pictures when using the PlayStation 2 console There is nothing wrong with the PlayStation 2 console or the way it is manufactured The problem technically Static
55. setting has higher priority than the Audio settings in Language Setup page 16 If you set DIGITAL OUT OPTICAL to On and DTS to Off in Audio Setup the DTS sound track is not played even if you set this item to On and the highest numbered audio channel is recorded in DTS format e If PCM DTS Dolby Digital and MPEG AUDIO sound tracks have the same number of channels the console selects PCM Dolby Digital DTS and MPEG AUDIO sound tracks in this order Depending on the DVD the audio channel with priority may be predetermined In this case you cannot give priority to the DTS Dolby Digital or MPEG AUDIO format by selecting On E DVD Volume If the audio output level of the DVD is low you can turn up the volume of the DVD Note DIGITAL OUT OPTICAL must be set to Off to access this function e 2 you can turn up the volume e 1 you can turn up the volume e Standard original audio volume Normally select this position Note Depending on the DVD the sound may be distorted if you select 1 or 2 After changing DVD settings To save your changes be sure to eject the DVD before pressing the RESET button or turning off the unit with the MAIN POWER switch Please note that changes will not be saved if you reset or turn off the console without first ejecting the DVD This product incorporates copyright protection technology that
56. surface when handling a disc hold it by the edges Do not stick paper or tape onto the disc Do not write on the disc with a marker etc e Fingerprints or dust on the disc can distort the picture or reduce sound quality Make sure discs are always clean before use e Clean discs using a soft cloth lightly wiping from the centre outwards Do not use solvents such as benzene commercially available cleaners not intended for CD use or anti static spray intended for vinyl LPs since these can damage the disc Do not place the console in an unusually hot location Do not leave the console in a car with its windows closed particularly in summer as this may warp the exterior of the console or cause the console to malfunction Moisture condensation If the console or the disc is brought directly from a cold location to a warm one moisture may condense on the lens inside the console or on the disc Should this occur the console may not operate properly In this case remove the disc and do not put the disc back in until the moisture evaporates This could take several hours If the console still does not operate properly please contact the appropriate PlayStation customer service helpline which can be found on the customer registration card within every PlayStation and PlayStation 2 format software manual Do not subject the console to violent physical shock Do not throw or drop the console or its accessori
57. t settings are underlined Select Custom Setup in the Setup display E Pause Mode Selects the picture in pause mode e Auto a picture including subjects that move dynamically is output without any jitter Normally select this position e Frame a picture including subjects that do not move dynamically is output with high resolution E Parental Control Playback of some DVDs can be limited depending on the age of the users The Parental Control function allows you to set a playback limitation level Sets a password and playback limitation level which prevent children from viewing certain content on the DVD Select Custom Setup in the Setup display 1 Select Parental Control using the directional buttons then press the X button E When you have not entered a password The display for entering a password appears 45678 9 6oau custom Sah Register Password Parental Control Enter a four digit password Mi When you have already registered a password The display for confirming the password appears Skip step 2 BoB Custom Seth Parental Control Enter a four digit password Enter a password in 4 digits using the number buttons Parental Control To confirm enter your password again To confirm your password enter it again using the number buttons You can set the Parental Control level and change the password fogu Custom Setup Parental
58. tracks you want to play 4 Press the O button to return to the browser screen To play the tracks in random order 1 Select Play Mode using the up and down directional buttons and press the X button 2 Select Shuffle using the right and left directional buttons and press the X button 3 Press the O button to return to the browser screen To play all tracks repeatedly 1 Select Repeat using the up and down directional buttons and press the X button 2 Select All using the right and left directional buttons and press the X button 3 Press the O button to return to the browser screen To play a track repeatedly 1 Select Repeat using the up and down directional buttons and press the X button 2 Select 1 using the right and left directional buttons and press the X button 3 Press the O button to return to the browser screen Playing a DVD video Depending on the DVD video some operations may be different or restricted Refer to the instructions supplied with your disc EH Turn on the console using the MAIN POWER switch on the back of the console The standby indicator on the front of the console lights up in red to indicate that the console is now in standby mode FA Press the 5 standby RESET button The indicator turns green and the start up screen appears EJ Press the button T
59. uage Setup and then DVD Menu For details see page 16 To return to the previous screen in the DVD menu Select 9 Return and press the X button This function may not be available on some DVDs Notes e A DVD menu may not be available on some DVDs Depending on the DVD the DVD menu may be referred to as a menu in the instructions supplied with the disc Using the Title menu A DVD is divided into long sections of a film or a music feature called titles When you play a DVD which contains several titles you can select the title you want using the Title menu 1 Select iggy Title Menu using the directional buttons and press the X button The Title menu appears on the TV screen The contents of the menu vary from disc to disc 2 Press the directional buttons to select the title you want to play 3 Press the X button The console starts playing the selected title You can display the Title menu directly Press the O button on the controller when the Control Panel is not displayed To return to the previous screen in the Title menu Select 9 Return and press the X button This function may not be available on some DVDs Notes e On some DVDs you may not be able to select the title e On some DVDs the Title menu may be referred to as a menu or title in the instructions supplied with the disc Press ENTER may also be expressed as
60. ue to the programming on some DVDs you may not be able to change the angles even if multiple angles are recorded on the DVD Displaying subtitles With DVDs on which subtitles are recorded you can turn the subtitles on and off whenever you want while playing the DVD With DVDs on which multilingual subtitles are recorded you can also change the subtitle language whenever you want while playing the DVD For example you can select the language you want to practise and turn the subtitles on for better understanding Select Subtitle Options using the directional buttons and press the X button You can select the subtitle language and turn it on or off The languages you can select are different depending on the DVD You can select Subtitle Options directly Press the L3 button on the controller when the Control Panel is not displayed You can select the subtitle language and turn it on or off Notes e When playing a DVD on which no subtitles are recorded no subtitles appear e Due to the programming on some DVDs you may not be able to turn the subtitles on even if they are recorded on the DVD Depending on the DVD you may not be able to turn the subtitles off The type and number of languages for subtitles vary from disc to disc e Due to the programming on some DVDs you may not be able to change the subtitles even if multilingual subtitles are recorded on it e While playing the DVD the subtitle may
61. ul not to accidentally press the RESET button while playing a game or the game will restart PlayStation format CD ROM is inserted Screens that appear at start up id When turning on the console without first inserting a disc Screen appears e When you insert a PlayStatione2 or PlayStation format disc after screen has appeared screen or will appear and you can start the game e You can move to the System Configuration menu or the browser screen from screen For details see Using the Main menu on page 7 ee PlayStation A disc that cannot be played with the PlayStation 2 console is inserted Please vaioystarion When turning on the console with a disc already inserted Depending on the type of disc inserted screen or will appear If screen appears it is possible that the inserted disc is not a PlayStation or PlayStation 2 format disc Check the disc type page 3 or PlayStations format disc Ending a game eer 1 Press the button No disc is inserted Main menu The dise tray opens 2 Remove the disc 3 Press the button The disc tray closes Browser m Conti 4 Press the RESET button for about two seconds The indicator turns red and the console enters standby mode PlayStation 2 format DVD ROM CD ROM is inserted PlayStation 2 When not intending to play a game for an
Download Pdf Manuals
Related Search
Related Contents
TOP INCORPO - Bayer-Agri FT-21801NK-SL16 Samsung TELEVISOR 32" J6300 GE 29487 Conference Phone User Manual Sony Ericsson W610i Owner's Manual INPEFA plug-in for Petrel* Software User Manual Manual LAMPADA FENDA VER_2_LED Pelucco Color Efex Pro™ 3.0 Copyright © All rights reserved.
Failed to retrieve file