Battery Holder S300/S400 User`s Manual - STAR
Contents
1. SCA Battery Holder S300 S400 User s Manual STAR MICRONICS CO LTD 536 Nanatsushinya Shimizuku Shizuoka 424 0066 Japan Tel int 81 54 347 0112 Fax int 81 54 347 0409 Information This manual contains operating instructions and important safety guidelines The Battery Holder S300 S400 is designed to charge only the Lithium Ion battery pack compatible with the SM S300 and SM S400 Portable Printers The contents of this manual are subject to change without prior notice Suitable Environment for the Use of the Battery Holder is as Follows Se aS Operation Temperature 0 C to 40 C No Condensation Storage Temperature 30C to 85 C Relative humidity 5 to 95 No Condensation Altitude 0 10 000 feet Cooling Convectional Non Vented Case Warning Safety Guidelines Keep the charger in a cool dry place away from direct sunlight high temperature and moisture Do not insert foreign objects into the charger Do not operate the charger if it appears damaged Do not disassemble incinerate or short circuit batteries the charger or related components Do not operate the charger when your hands or body are wet Do not operate the charger near water To reduce the risk of electric shock unplug the charger before cleaning This charger cannot be used for any other types of batteries Use of any charger not approved for the SM S300 and SM S400 Series can damage the batteries or the printer and wi2. ll void the warranty General Guidelines The recharging time depends on the voltage level and ambient temperature of the battery Normally it takes about four 4 to five 5 hours to completely recharge one battery pack The battery is a consumable part that will gradually lose its lifespan over time depending on the total number of usage hours Batteries approved for use with the SM S300 and SM S400 carry a standard warranty of six 6 months Copyright 2010 Star Micronics Co Ltd im00100EN EH S300 S400 Parts Breakdown Charge Contacts Locking Tab AC Cord E Using the Battery Holder S300 S400 1 To install battery pack proceed as follows Insert the battery pack in the direction of the colored arrow 2 To recharge the battery install the battery pack in the Battery Holder S300 S400 Insert the DC Plug into the charge connector and plug the AC Cord into a po wer outlet 3 The S300 S400 Series Battery Pack will begin the charge cycle LED Indicators 1 Red LED ON Charging 2 Green LED ON Fully Charged 3 OFF Battery Unloaded or Voltage Overload NOTE Only use the AC Cord approved for the SM S300 and SM S400 Usage of any othercord can damage the printer battery or battery pack and will void the warranty
Download Pdf Manuals
Related Search