Home

Untitled

1. monitor sequentially Trpin host e Interval Choose the sequence dwell time e Add Click to register cameras or camera groups to display sequentially by selecting them from the list of cameras and camera groups registered on the receiver e Edit Select a camera or camera group from the Sequence List and click the button to enable or disable its Audio Out e Remove Remove All Select a camera or camera group from the list and click the Remove button to delete it Clicking the Remove All button deletes all cameras and camera groups from the list NOTE You can change the sequence order by clicking a camera or a camera group and dragging and dropping it to the desired location on the Sequence List Event Monitoring Check the Event Monitoring On box to display the camera associated with the event when the selected event occurs Deer Choose the event monitoring Dwell Time and select the Event Type NOTE For event monitoring to work the video input device should be set up to send a callback message to the receiver during the Event setup CX 1C omm 11 User s Manual Display e Video Format Choose the video format e Video Output Choose the video output mode Automatic or VGA Selecting Automatic detects a connected monitor automatically When the VGA monitor does not support the auto detect function select VGA to change the video output mode manua
2. 3 2 System You can change a receiver s system information and import or export all settings Remote Setup Quick Setup a General Date Time General Name Enter receiver s name up to 31 characters mia including spaces e System ID Assign a system ID to distinguish v receiver from others q C e Language Choose the language to be used during ES remote setup and monitoring pem e HW Version SW Version These fields display the 5 hardware and software versions Password Click the Setup button to set up a ASA password for the remote connection to the receiver e Setup Load Default Setup Click to return all except network related settings to the original factory settings You can select whether or not network settings will be included when the default setup is applied Refer to the Network menu for details about the network settings Import Setup Click to apply the settings saved as a dat file format to the receiver A setup screen appears allowing you to select the setup file You can select whether or not network settings except the DVRNS setting will be included when the setup is applied Refer to the Network menu for details about the network settings Export Setup Click to save the current receiver settings as a dat file format A setup screen appears allowing you to name the setup file NOTE Do NOT check
3. Camera Group Sequence Monitoring Event Monitoring Display Camera List You should register cameras connected to video input devices for monitoring e Scan Click to find and create a list of cameras connected to video input devices except DVRs that are networked Selecting cameras to monitor from the list and clicking the Add button registers the selected cameras Enter the User ID and Password for remote connection Selecting Apply to all applies the user ID and password setup to all the selected cameras User s Manual Auto Scan Click to reload the camera list Manual Scan When the video input device is networked via WAN or temporarily disconnected from the network click the button and register the camera manually by entering the IP address of the video input device e Add Click to register a camera manually by entering the IP address of a video input device if the device is a DVR or when the device is not networked Camera Setup Enter a camera name and the IP address and select a desired camera number ID If the device supports more than one audio eS input select an audio in channel by clicking the Audio No field of the et selected camera number When selecting more than one camera the camera number ID will be added to the name automatically Click the Port button to set up the port number for the camera connection Selecting the Use DVRNS box allows you to enter a
4. and unused for long periods of time unplug it from the wall outlet and disconnect the antenna or cable system This will prevent damage to the equipment due to lightning and power line surges 10 Overloading Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock 11 Objects and Liquids Never push objects of any kind through openings of this equipment as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock Never spill liquid of any kind on the equipment 12 Servicing Do not attempt to service this equipment yourself Refer all servicing to qualified service personnel 13 Damage requiring Service Unplug this equipment from the wall outlet and refer servicing to qualified service personnel under the following conditions When the power supply cord or the plug has been damaged If liquid is spilled or objects have fallen into the equipment If the equipment has been exposed to rain or water If the equipment does not operate normally by following the operating instructions adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the equipment to its normal operation If the equipment has been dropped or the cabinet damaged When the equipment exhibits a distinct
5. change in performance this indicates a need for service 14 Replacement Parts When replacement parts are required be sure the service technician has used replacement parts specified by the manufacturer or that have the same characteristics as the original part Unauthorized substitutions may result in fire electric shock or other hazards 15 Safety Check Upon completion of any service or repairs to this equipment ask the service technician to perform safety checks to determine that the equipment is in proper operating condition 16 Field Installation This installation should be made by a qualified service person and should conform to all local codes 17 Correct Batteries Warning Risk of explosion if battery is replaced by an incorrect type Dispose of used batteries according to the instructions 18 Tmra A manufacturer s maximum recommended ambient temperature Tmra for the equipment must be specified so that the customer and installer may determine a suitable maximum operating environment for the equipment 19 Elevated Operating Ambient Temperature If installed in a closed or multi unit rack assembly the operating ambient temperature of the rack environment may be greater than room ambient Therefore consideration should be given to installing the equipment in an environment compatible with the manufacturer s maximum rated ambient temperature Tmra 20 Reduced Air Flow Installation of the equipment in the
6. editions to this publication may be issued to incorporate such changes The software included in this product contains some Open Sources You may obtain the complete corresponding source code from us See the Open Source Guide on the software CD OpenSourceGuide OpenSourceGuide pdf or as a printed document included along with the User s Manual WEEE Waste Electrical amp Electronic Equipment Correct Disposal of This Product Applicable in the European Union and other European countries with separate collection systems This marking shown on the product or its literature indicates that it should not be disposed with other household wastes at the end of its working life To prevent possible harm to the environment or human health from uncontrolled waste disposal please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources Household users should contact either the retailer where they purchased this product or their local government office for details of where and how they can take this item for environmentally safe recycling Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal User s Manual Important Safeguards 1 Read Instructions the safety and operating instructions should be read before the appliance 15 Operated 2 Retai
7. registered on the DVRNS server an error message displays Port e Admin Set up the admin port number for remote 28 connection to receiver a o e Callback Set up the callback port number to be notified of event detection from video input devices when using the event monitoring function e Control Set up the port number for remote control using a network keyboard NOTES e The receiver restarts automatically after changing the port settings e See Chapter 5 Live Monitoring 5 1 Video Monitoring Event Monitoring tor details about event monitoring Four Channel Video Receiver Security e SSL Check the box to use the SSL function You can enhance the security of outgoing data from the receiver by using the SSL Secure Sockets Layer protocol When using the SSL function the receiver cannot be connected with a program or a system that does not support the SSL function Matar EP ka alert wel For ror Lina nar Pep ln nen n itam gel NOTES Using the SSL function might cause system congestion in the system that receives data from the receiver depending on the security level e This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit http www openssl org 3 4 Video You can register cameras to monitor and set up sequence monitoring event monitoring and OSD information Remote Setup Quick Setup 8 System Network Camera List
8. the Include Network Setup box when the network settings of the setup file are used in another receiver Otherwise the connection to the receiver might not be made properly Date Time e Date Time Change the system date time date time format and the time zone Turn daylight saving time on or off by checking the box Clicking the Apply button applies the changes immediately e Time Sync Automatic Sync Check the box to automatically synchronize the time with a time server Enter the IP address or the domain name of the time server and set the time interval for synchronization Run as Server Check the box to run the receiver as a time server Totem Four Channel Video Receiver NOTE You can use the domain name instead of the address of the time server during the Time Sync setting if you set up the DNS Server when setting up network 3 3 Network You can change the network settings and set up DVRNS and SSL function Remote Setup Quick Setup w System IP Address DVRNS Port Security IP Address e Type Select the type of network configuration Manual Select when the receiver is using a static IP address for network connection and set up LAN parameters manually DHCP Select when the receiver is networked via DHCP Dynamic Host Configuration Protocol Click the OK button and a temporary IP address is automatically assigned to the receiver The receiver periodically will be issue
9. the monitor connected to the Master Selecting a monitor from the monitor table and clicking the button sets up the monitor as a master monitor Merge Divide Click to change the table layout by merging or dividing monitors Dragging and dropping the mouse cursor to other monitors after selecting a monitor from the monitor table and clicking the Merge button merges the selected monitors Selecting a merged monitor from the monitor table and clicking the Divide button divides the selected monitor P Address Click to register receivers to share a mouse NO in the right box displays the number in the monitor table except the IP address of a master receiver l ietis eee nd A Pd NOTES Clicking Auto Scan lists receivers networked via LAN To register a receiver select the receiver from the receiver list in the left box and drag and drop it to the IP Address field in the right box You can enter the IP address manually if a receiver 15 not displayed in the list Areceiver cannot share a mouse when the receiver is not set up to enable the XUI function event though it is registered on a master receiver You should set up as a master receiver only the receiver that a USB mouse is connected to Otherwise the mouse will not work properly Four Channel Video Receiver Chapter 4 Live Monitoring You can remotely monitor live video from cameras connected to video input devices Connec
10. USER S MANUAL Four Channel Video Receiver WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL COMPLIANCE NOTICE OF FCC THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE PURSUANT TO PART 15 OF THE FCC RULES THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT THIS EQUIPMENT GENERATES USES AND CAN RADIATE RADIO FREQUENCY ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTION MANUAL MAY CAUSE HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL INTERFERENCE IN WHICH CASE USERS WILL BE REQUIRED TO CORRECT THE INTERFERENCE AT THEIR OWN EXPENSE WARNING CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER S AUTHORITY TO OPERATE THE EQUIPMENT THIS CLASS OF DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE CAUSING EQUIPMENT REGULATIONS The information in this manual is believed to be accurate as of the date of publication We are not responsible for any problems resulting from the use thereof The information contained herein is subject to change without notice Revisions or new
11. ananenoss 5 A 5 A e 6 Generals ceca 6 Date Time REESE 6 A A A 7 o NET NEDE i 8 xo me 8 A 9 SV o DONNER RR RE RR T MR x 9 SOIN Ic PNE REDDE 9 Camera GOUD RNC PO 10 Sequence MoONItOriNQ oooccccnnccccncoonncnnnncnononnnnnonnnonononnnnnnnnnnnononanenons 11 EVENIMIONIO MUNG PE TTE 11 A ERE 12 CREDI es 12 A 18 A A 13 A e 13 CHING A e oO E A 14 Chapter 4 Live Monitorino cccccooconcccnnnccccnconncnncnononnnnnnnnnonnnonnnnnnnncnonanenons 15 4 1 Video Monitoring RTL 15 Freeze Mode OMEN RT 19 Sequence Mode cooooocccnnnccccccnnoccnnnncnnnnnnnnnnnononnnnnnnnnnnononnnnnnnnnnnnnnnananennns 15 EVENT IMOFPILOEIICIa ne anon ore P ne thm epu escena eins 16 4 2 Audio Communication uuae caosa oio erint eva roses tn pepe X Re 16 A oo e A 16 o A 16 A 16 4 4 PTZ CONTO rain 17 User s Manual o RENTEN EE TM T E we 18 RS485 Connection Example 18 I A E leni este 18 RS485 Connector Pin 18 TOUS SIMO ONY Secs dele dette indicios 19 Map of Screens Remote 19 a 20 Four Channel Video Receiver Chapter 1 Introduction 1 1 In This Manual This
12. cations gx Camera Alarm Input Output Audio Input Output Transmitter Transmitter GAN NETWORK gt pudo In I H Receiver Network Keyboard Audio Output bra Mouse Main Monitor BNC or VGA Four Channel Video Receiver Chapter 2 Installation 2 1 Package Contents Network Video Receiver e DC Adapter 5V e Power Cord e Installation CD INIT User s Manuals Receiver INIT Wall mount Kits Audio Y Connector e USB Mouse 2 2 Front Panel O D USB Port 2 Factory Reset Switch 3 Network LED 4 Power LED USB Port Connect a USB mouse to control video monitoring on a connected monitor or a USB flash drive to upgrade the software Disconnect power from the receiver and connect a USB flash drive containing the upgrade package file rui and autorun txt to the receiver Connect power to the receiver and the software will be upgraded automatically You can upgrade the software remotely by running the INIT program Refer to the INIT User s Manual for details on remote software upgrade e Factory Reset Switch Use to return all settings to the original factory settings See below for details e Network LED Displays network connection status Refer to Appendix A LED Indicators for details Power LED Displays system operating status Refer to Appendix A LED Indicators for details Factory Reset This switch will only be used on the rare occasi
13. d a new IP address automatically ADSL Select when the receiver is networked via ADSL Enter the ID and password for ADSL connection and click the OK button A temporary IP address is automatically assigned to the receiver The receiver periodically will be issued a new IP address automatically DNS Server Enter the IP address of the DNS server If you set up the DNS server the domain name of the server can be used instead of the IP address when the DVRNS time server and SMTP servers are set up Ask your Internet service provider for the IP Address of the DNS Server NOTES e Ask your network provider for details about the network connection type and connection information for the receiver f the receiver is configured for a DHCP or ADSL network it is best to use the DVRNS function because the receiver s IP address might change frequently Ask your Internet service provider for information about the IP Address of the DNS Server User s Manual DVRNS DVRNS Server Port Enter the IP address or domain tm ER name and port number of the DVRNS server on which the video input device to connect is registered e DVR Name Service Check the box to use the DVR Name Service function The receiver will be registered automatically on the DVRNS server entered in the DVRNS Server Port fields above Use NAT Check the box when using NAT Network Address Translation DVR Name Enter receiver s
14. ing it allows you to change PTZ control panel s location NOTE The PTZ option is not available if the connected camera 15 not a PTZ camera m M Exit Control Panel avd Nha 4 Pan Tilt E rg Zoom In Out I Focus Near Far b wd 09 amp Y Iris Open Close 5 Set Move to Preset Set Preset Move the PTZ camera to the desired location by using the Pan Tilt buttons on the PTZ control panel Click amp button and the Set Preset dialog 1 Lobby box appears Click the desired preset number to assign to the current location and a virtual keyboard appears Enter the name of the selected preset number Click the OK button to save the preset Move to Preset Click the amp button on the PTZ control panel and the Move to Preset dialog box appears Click the desired preset number The PTZ camera moves to the selected preset location 17 User s Manual Appendix RS485 Connection Example E r NETWORK mas E RS4B5 RS485 a 2 RS485 aR video Out Video In Monitor L ME Transmitter Receiver DVR The receiver receives data from a DVR via RS485 connection and transmits the data to a transmitter via network connection It allows you to control the PTZ camera connected to the transmitter while monitoring video from the PTZ camera on the DVR NOTES e The RS485 setting must be configured properly Refer
15. lly e Interactive Bandwidth Control Check the box to allow image resolution of the connected camera to be changed dynamically based on the screen mode on a monitor 4 CIF in full screen and CIF in quad screen e OSD Status Camera Select OSD items to display on a monitor OSD Transparency Margin Adjust the transparency and margins of OSD information to display on a monitor NOTES e For the Interactive Bandwidth Control function to work the video input device also should be set up to use the function e The OSD information that can be set up includes Network The icon g is displayed when the unit is connected to a network via Ethernet Freeze amp Sequence The icon amp is displayed while in the freeze mode the icon is displayed while in the sequence mode and the icon amp is displayed while in the event monitoring mode No Title The number and title of the connected camera are displayed Event Event icons are displayed when the events are detected 4 Motion detection Alarm in NO VIDEO Video loss BLIND VIDEO Video blind PTZ The icon is displayed when the connected camera is a PTZ camera Audio The speaker or 8 microphone icon is displayed when audio out or audio in is enabled Date Time Date and time of the connected camera are displayed 3 5 Device You can set up audio in out and RS485 port information Hemote Setup Quick Setup System Ne
16. maintains the current connection NOTE For the event monitoring to work Event Monitoring On should be selected during the Remote Setup Event Monitoring setup Refer to Chapter 3 Remote Setup 3 5 Video Event Monitoring setup for details 4 2 Audio Communication You can enable two way audio communication one to one with the video input device to which the camera is connected Select a camera on the screen and select Audio from the monitoring menu Selecting Speaker from the menu allows you to monitor live audio from the video input device through a connected speaker and selecting Microphone from the menu allows you to send live audio to the video input device through a connected microphone NOTE Audio communication does NOT work when the audio in or out of the connected video input device 15 not enabled 4 3 Setup Network Selecting Network Setup from the monitoring menu allows you to set up network settings of the connected receiver Refer to Chapter 3 Remote setup 3 3 Network IP Address for details OSD Selecting OSD from the monitoring menu allows you to select options to display on the screen Refer to Chapter 3 Remote setup 3 4 Video Display for details Four Channel Video Receiver 4 4 PTZ Control Selecting PTZ from the monitoring menu displays a PTZ control panel and allows you to control the PTZ camera remotely Clicking the empty space on the left side of the PTZ control panel and dragg
17. manual is intended for users of the four channel network video receiver network video decoder and includes instructions for using and managing the receiver on a network 1 2 Features This network video receiver receives compressed video from a video input device network video transmitter DVR over Ethernet connections and decompresses the video to display it on a monitor The receiver can be accessed configured and managed by using the INIT Integrated Network Installation Tool program This receiver offers the following features e BNC composite or VGA video output automatic detection for VGA monitor e Decompression algorithm for H 264 MPEG 4 and M JPEG e Two way audio communication e Simultaneous connection to multiple video input devices up to 4 channels Convenient firmware upgrades via either the USB port or the network Firmware duplication and autorecovery functions to enhance system stability Managing multiple receivers via Ethernet connections Event monitoring alarm in motion video loss and video blind e Sequence monitoring e XUI function to control multiple network video receivers with a single mouse PTZ control of remote cameras connected to video input devices Remote control using a network keyboard NOTE If the video input device is a DVR connection to the DVR and PTZ control of the camera may not be supported depending on the specifications and version of the DVR User s Manual 1 3 Typical Appli
18. mmunication Connect TX RX and TX RX of the device to and respectively of the receiver Refer to the device manufacturer s manual for the RS485 connection configuration e Video Out BNC Connect a monitor e Video Out VGA Connect a VGA monitor Power In Connect the power adapter 5 VDC 0 8A The receiver starts booting as soon as power is applied NOTES tis possible that the receiver will not detect a VGA monitor automatically if the connected VGA monitor does not support the auto detect function In this situation switch the video output to VGA out See Chapter 3 Remote Setup 3 4 Video Display for details on switching video output e Camera and audio surveillance may be prohibited by laws that vary by region Check the laws in your area before using this product for surveillance purposes CAUTION The network connector is not designed to be connected directly with cable or wire intended for outdoor use WARNING ROUTE POWER CORDS SO THAT THEY ARE NOT A TRIPPING HAZARD MAKE CERTAIN THE POWER CORD WILL NOT BE PINCHED OR ABRADED BY FURNITURE DO NOT INSTALL POWER CORDS UNDER RUGS OR CARPET THE POWER CORD HAS A GROUNDING PIN IF YOUR POWER OUTLET DOES NOT HAVE A GROUNDING PIN RECEPTACLE DO NOT MODIFY THE PLUG DO NOT OVERLOAD THE CIRCUIT BY PLUGGING TOO MANY DEVICES INTO ONE CIRCUIT Four Channel Video Receiver Chapter 3 Remote Setup Remote Setup allows you to change all settings of the receive
19. n Instructions The safety and operating instructions should be retained for future reference 3 Cleaning Unplug this equipment from the wall outlet before cleaning it Do not use liquid aerosol cleaners Use a damp soft cloth for cleaning 4 Attachments Never add any attachments and or equipment without the approval of the manufacturer as such additions may result in the risk of fire electric shock or other personal injury 5 Water and or Moisture Do not use this equipment near water or in contact with water 6 Placing and Accessories Do not place this equipment on an unstable cart stand or table The equipment may fall causing serious injury to a child or adult and serious damage to the equipment Wall or shelf mounting should follow the manufacturer s instructions and should use a mounting kit approved by the manufacturer This equipment and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the equipment and cart combination to overturn 7 Power Sources This equipment should be operated only from the type of power source indicated on the marking label If you are not sure of the type of power please consult your equipment dealer or local power company 8 Power Cord Operator or installer must remove power and TNT connections before handling the equipment 9 Lightning For added protection for this equipment during a lightning storm or when 1t 1s left unattended
20. name instead of the IP address of the device Login Setup Enter a User ID and Password for the camera connection Edit Select a camera from the list and click the button to edit the settings e Remove Remove All Select a camera from the list and click the Remove button to delete it Clicking the Remove All button deletes all cameras from the list NOTE Ask the administrator of the video input device for the camera connection information User ID Password and IP Address Port Camera Group You can register camera groups to effectively monitor video from multiple cameras 4 Lorem Lamia Lil Four Channel Video Receiver e Add Clicking the button lists cameras registered on receiver Enter a group name to register in the Name field and add cameras by clicking the camera to add to the group in the camera list and dragging and dropping it to the channel screen at the right Selecting a camera in the channel screen and clicking the Remove Selected Camera button deletes the selected camera from the channel screen e Edit Select a group from the list and click the button to edit the settings e Remove Remove All Select a group from the list and click the Remove button to delete it Clicking the Remove button deletes all groups from the list Sequence Monitoring Check the Sequence Monitoring On box to display video i Tea
21. name to be registered on the DVRNS server Check whether or not the name is available by clicking the Check button Help Desk Choosing the OK button registers the receiver on the DVRNS server Proper DVRNS settings will display the help desk information for the DVRNS server NOTES e The DVRNS DVR Name Service function allows the receiver to use dynamic IP addresses for remote connection When using this function you can access the receiver remotely by using the receiver s name instead of its IP address For the DVRNS function to work properly the receiver should be registered on the DVRNS server and the DVRNS server settings in the INIT program for the receiver should match the settings registered on the DVRNS server Any changes on the DVRNS server might Cause improper operation e When LAN settings have been changed set up the DVRNS settings after saving your LAN changes by clicking the OK button e You will need to get the IP address or domain name of the DVRNS server from your network administrator You can use the domain name instead of IP address if you set up the DNS server during the IP Address setup e When using a NAT Network Address Translation device refer to the NAT manufacturer s instructions for the proper network settings e The receiver s name you entered in the DVR Name field should be checked by clicking the Check button otherwise the DVRNS changes will not be saved When entering no name or a name already
22. o Map of Screens Remote Setup Remote Setup Quick Setup System Metwork Video Audio System General Date Time IP Address security Video Camera List Camera Group Sequence Monitoring Event Monitoring Display Devica Audia 5485 XUI 19 User s Manual Specifications N TSC 704x480 704x240 552x240 ans PAL 704 480 704x240 352x240 Frame Rate NTSC 60 ips 4CIF 60 ips or 30 ips 4CIF for H 264 Images per second PAL 50 ips 4CIF 50 ips or 25 ips 4CIF for H 264 Use a Y connector to connect audio in white and out red GENERAL Dimensions W x H x D 4 7 x 1 1 x 4 3 119mm x 29mm x 108mm Shipping Dimensions WxHxD 10 4 x 4 1 x 7 5 265mm x 105mm x 190mm Unit Weight 0 64 lbs 0 29Kg Shipping Weight 3 Ibs 1 36Kg Operating Temperature Operating Humidity Power Power Consumption Approval Specifications are subject to change without notice p 29667177 video 20 2 1
23. ons that you want to return all the settings to the original factory settings CAUTION When performing a Factory Reset you will lose any settings you have saved Disconnect the power adapter from the receiver Poke a straightened paperclip into the factory reset switch hole Connect the power while holding the reset switch Release the switch when the Network and Power LEDs blink together The receiver resets to factory defaults and restarts after completing the factory reset You can perform a factory reset while the receiver is turned on by poking a straightened paperclip into the factory reset switch hole and releasing the reset switch A factory reset also can be performed remotely by running the INIT program The receiver restarts after completing the factory reset Refer to the INIT User s Manual for details on remote factory resetting User s Manual 2 3 Rear Panel D Network Port 2 Audio In Out 3 RS485 Port 4 Video Out BNC 8 Video Out VGA Power In e Network Port Connect a Cat5 cable with an RJ 45 jack Refer to the INIT User s Manual for details on network connection setup Audio In Out Connect to an audio source line in or microphone and an amplifier line out by using a Y connector red audio out white audio in provided with the receiver The receiver does not have amplified audio output so you will need a speaker with an amplifier e RS485 Port Connect to a device for RS485 co
24. r Run INIT program select a receiver and click the Setup icon E3 on the Main screen Select Remote Setup from the Setup menu and the Remote Setup screen appears You can also display the Remote Setup screen by selecting a receiver clicking the right mouse button and selecting Remote Setup on the Main screen 4 INIT Integrated Network Installation Tool lt Reset v Managemen IP Address Setup Remote Setup Apply Setup File Make Setup File Remote Setup Quick Setup QUICK SETUP OVERVIEW System Network System Video Audio System Network Video Device XUI Name System ID 0 Language English Date Time 2009 11 03 05 29 32 Time Zone GMT 05 00 Eastern Time US Canada DST Type Manual IP Address 10 0 15 147 Gateway 10 0 0 11 Subnet Mask 255 255 0 0 DNS Server 10 0 0 23 Camera List 6 Audio Microphone Audio Out Off Cancel Clicking a menu in the left of the Remote Setup screen displays the current settings for that menu on the right side of the screen Clicking submenus under each menu allows you to change the settings Clicking the OK button closes the Remote Setup screen and applies the changes 3 1 Quick Setup The Quick Setup allows you to change 5 basic system network video and audio settings Remote Setup Quick Setup System Network Video Audio User s Manual
25. rack should be such that the amount of airflow required for safe operation of the equipment is not compromised 21 Mechanical Loading Mounting of the equipment in the rack should be such that a hazardous condition is not caused by uneven mechanical loading 22 Circuit Overloading Consideration should be given to connection of the equipment to supply circuit and the effect that overloading of circuits might have on over current protection and supply wiring Appropriate consideration of equipment nameplate ratings should be used when addressing this concern 23 Reliable Earthing Grounding Reliable grounding of rack mounted equipment should be maintained Particular attention should be given to supply connections other than direct connections to the branch circuit e g use of power strips Four Channel Video Receiver Table of Contents Chapter 1 Introduction enero 1 1 1 In This e 1 SUS 4 ER 1 1 3 Typical 2 Chapter 2 InstallatiON coccccononnnccnnncccononnncnnnncnonnonnnnnnnnnononannnnnnnonononanenons 3 2 1 Package aT RC NR 3 222 Front zii RR 3 ernesto ictericia 3 lE AMC REESE 4 Chapter Remote SetUpP oocccccncccccccnnccnnncccnononncnnnnnononnnnnnnnnononannnnnnnonon
26. t a monitor and USB mouse to the video receiver Clicking the right mouse button on the screen displays the monitoring menu Clicking the left mouse button on the screen in the live monitoring mode toggles the screen format between 2x2 and full Camera Camera Group Audio Freeze Sequence Event Monitoring On Network Setup 050 PTZ 4 1 Video Monitoring Selecting Camera from the monitoring menu and selecting a camera from the camera list connects to the camera and displays live video on the screen Selecting the connected camera again from the camera list releases the current connection Selecting Camera Group from the monitoring menu allows you to connect to cameras within a user defined camera group at once NOTES e For the video monitoring cameras or camera groups must be registered Refer to Chapter 3 Remote Setup 3 4 Video Camera List Camera Group setup for details e You cannot connect to a camera when the video input device to which the camera is connected is not networked Freeze Mode Selecting Freeze from the monitoring menu freezes the current image on the screen Click the left mouse button on the screen or select Freeze again from the monitoring menu to release the Freeze mode While in the Freeze mode the 3 icon is displayed in the bottom left corner of the screen if Freeze is selected during the Remote Setup Video Display setup Sequence Mode Selecting Sequence from the monitoring men
27. to the Chapter 3 Remote Setup Device RS485 section The PTZ camera connected to the transmitter must be configured in the DVR Refer to the DVR User s Manual for details on the PTZ camera setup in the DVR e The RS485 connection might not be supported depending on the software version of the transmitter LED Indicators Power LED Flicker The unit 15 upgrading software Power 8 sequentially Network LED i The unit 15 recovering NAND flash memory simultaneously RS485 Connector Pin Outs Ea E Master Unit Slave Unit O To gt TX RX Four Channel Video Receiver Troubleshooting Possible Solution Check power cord connections No Power e Confirm that there is power at the outlet Check network connections on the receiver and the video input device to connect Check that video output mode is set to Automatic if the BNC monitor is No Live Video connected Switch the video output mode to VGA if the connected VGA monitor does not support the auto detect function Refer to Chapter 3 Remote Setup 3 4 Video Display for details on video output mode setup The mouse Check the XUI settings for each receiver that shares a mouse controlling multiple The XUI function must be enabled and the XUI group ID for all receivers receivers does not must be the same work properly e Master mode must be set up only in one receiver that a mouse is connected t
28. twork Video Audio RS485 Four Channel Video Receiver Audio e Audio In Check the box to enable audio in and select the proper audio in type You can also adjust volume r Audio Out Check the box to enable audio out You Pa can also adjust the volume NOTE The receiver does not have amplified audio output so you need to use a speaker with an amplifier RS485 Remote Device Connection Check the box and click the Select Device button list of cameras registered cee on the receiver is displayed Set up the device address E by selecting a camera from the list and set up the RS485 port information of the receiver below You can transfer data received to the receiver through the RS485 port to the video input device which the selected camera 15 connected to via network connection Refer to Appendix RS485 Connection Example for details 3 6 XUI You can set up the XUI function enabling many receivers to share one mouse Quick Setup System Network Video Device Setting 13 User s Manual Setting Check the Enable box to enable the XUI function Group ID Designate a group ID of the receivers to share a mouse Master Mode Check the box to set up the receiver as a master receiver The other receivers with the same group ID will be controlled by a USB mouse connected to the master receiver Table Arrange the table layout of
29. u causes the cameras to display sequentially based on the settings made when setting up sequence monitoring The gf icon is displayed in the bottom left corner of the screen if Sequence is selected during the Remote Setup Video Display setup Selecting Sequence again from the monitoring menu releases the sequence mode and returns to the previous monitoring mode Clicking the left mouse button during sequence monitoring releases the sequence mode and maintains the current connection 15 User s Manual NOTES e For sequence monitoring to work Sequence Monitoring On should be selected during the Remote Setup gt Sequence Monitoring setup Refer to Chapter 3 Remote Setup 3 5 Video Sequence Monitoring setup for details e f a camera in the sequence mode is not enabled has lost video or is set to Covert unless the user has authority to view covert cameras video from that camera will not be displayed on the screen Event Monitoring Selecting Event Monitoring On from the monitoring menu displays the camera associated with the event on the screen when an event occurs The amp icon is displayed in the bottom left corner of the screen if Event is selected during the Remote Setup Video Display setup Selecting Event Monitoring On again from the monitoring menu releases the event monitoring mode and returns to the previous monitoring mode Clicking the left mouse button during event monitoring releases the event monitoring mode and

Untitled

Contents

Download Pdf Manuals

Related Search

Related Contents