Bluetooth® Pantograph Keyboard TK
Contents
1. Bluetooth 5 Reconnection is completed successfully when TK FBP014series is shown as Bluetooth Connected wi Pairing the Keyboard with a Connected Device If using Macintosh The screen will differ depending on the version of Mac OS but the procedure is the same 1 From the Bluetooth menu F amp Thu1450 Q click Set up Bluetooth De Turn Bluetooth Off vice v Discoverable The Bluetooth Setup Assistant Send File Browse Device is displayed Open Biuetootn rrererences Na If the Bluetooth menu is not displayed from the Apple menu click System Preferences When the System Preferences window is displayed click Bluetooth and then click on the Bluetooth window If using Mac OS X 10 5 x proceed to step 2 If using Mac OS X 10 6 x proceed to step 4 2 Click Continue aor Bluetooth Setup Assistant Introduction 3 Select Keyboard and e Click Gontinues ani The system will start search ing for Bluetooth devices to add 4 Hold down the key and the F1 key on this product si multaneously and then press the CONNECT button on the bottom of the keyboard Pressing the CONNECT button at the same time is not required When using this product with multiple Bluetooth devices press a key from F2 to F9 in place of F1 The key that is pressed at this point will register the Blue tooth device that is currently2. Ltd 5F Suam Bldg 1358 17 Seocho2 dong Seocho gu Seoul 137 862 Korea TEL 1588 9514 FAX 02 3472 5533 URL www elecom co kr ELECOM Singapore Pte Ltd 33 UBI AVENUE 3 03 56 VERTEX SINGAPORE 408868 TEL 65 6347 7747 FAX 65 6753 1791 ELECOM India Pvt Ltd 408 Deepali Building 92 Nehru Place New Delhi 110 019 India TEL 011 40574543 e mail support elecom india com URL http www elecom india com Bluetooth Pantograph Keyboard TK FBPO14E series 1st edition January 10 2012 ELECOM Co Ltd e This manual is copyright of ELECOM Co Ltd e Unauthorised copying and or reproducing of all or part of this manual is prohibited e The specifications and appearance of this product may be changed without prior notice for product improvement purposes e ELECOM Co Ltd shall bear no responsibility for any and all affects resulting from the use of this product regardless of the above reasons e Export or service transaction permission under the Foreign Exchange and Foreign Trade Control Law is required in order to export this product or parts of this product that constitute strategic materials or services e Windows and Windows Vista are trademarks of the Microsoft group of companies e iPad iPhone iPod touch Mac OS and Macintosh are trade marks of Apple Inc e PlayStation and PS3 are trademarks of Sony Computer Entertainment Co Ltd e The Bluetooth word mark and logo are tra
3. being paired Usage scenario Possible to use various devices interchangeably by using the Fr key a key from F1 to F9 during the pairing procedure and turns off when the procedure is complete step Y E gt CONNECT button Le The Connect Battery lamp flashes green On YQ If a message saying that registration failed is displayed check that this product is turned on and then click Continues 5 Click TK FBPO14series and then click Continue A passkey will be displayed on the screen 6 Use this prod uct to enter an Bluetooth Setup Assistant the passkey that displays wt o on the screen Enter the passkey using the E EE keyboard numerical keys and press the Enter key J Click Qi z When registration is completed successfully TK FBP014series appears in the Bluetooth window M Show Bluetooth status in the menu bar File Sharing Setup Advanced S If the keyboard is no tnd Sap ts properly recognized the oe window on the right will be displayed Click and then repeat the operation starting from procedure Continue You can now use the keyboard If using Windows This section describes the procedure when using the standard Windows Bluetooth function H If using Windows 7 7 In the notification area click E then right click the Bluetooth 3 Allow a Device to Connect icon and click A
4. for other models When using iPhone 3GS or iPod touch you must update the software to iOS 4 0 or later For instructions on updating software refer to iPhone 3GS or iPod touch manual J Touch Settings D gt Touch General B Sounds gt B Brightness gt Wallpaper gt RA General gt Mail Contacts Calendars gt Phone gt Safari gt g Messages gt F iPod gt 3 Touch Bluetooth Settings General About gt Usage 1h 29m gt Network gt Bluetooth On gt Spotlight Search gt Auto tock 1 Minute gt Passcode Lock off gt Restrictions off gt 4 While the device is searching for other devices hold down the ener key and the F1 key on this product simultaneously and then press the CONNECT button on the bottom of the keyboard Pressing the CON NECT button at the same time is not required Devices Searching Now Discoverable When using this product with multipole Bluetooth devices press a key from F2 to F9 in place of F1 The key that is pressed at this point will register the Blue tooth device that is currently being paired Usage scenario Possible to use various devices interchangeably by using the En key a key from F1 to F9 The Connect Battery lamp flashes during the pairing procedure and turns off when the procedure is complete step Fr CONNECT buttone Se 5 Touch TK FBP014series Not Paired Bluetooth on E If iPh
5. precautions carefully to avoid personal injury damage fire and other problems WARNING If a foreign object water metal chip etc enters the product immediately stop using the product and remove the batteries from the keyboard If you continue to use the product under these conditions it may cause a fire or electric shock If an abnormality is found with this product emission of heat smoke or abnormal smell from the product immediately stop using the product shut down connected devices and after thoroughly checking that heat from the product will not cause burns remove the batteries from the keyboard After doing this contact the retailer from whom you purchased the product If you continue to use the product under these con ditions it may cause a fire or electric shock Do not drop or hit this product If this product is damaged immediately stop using it turn it off and remove the batteries After doing this contact the retailer from whom you pur chased the product If you continue to use the product in a damaged condition it may cause a fire or electric shock Do not attempt to disassemble modify or repair this prod uct by yourself Doing so may cause a fire electric shock or product damage and may void the warranty Do not put this product in fire as the product may burst resulting in a fire or injury CAUTION Do not place this product in any of the following environ
6. ELECOM Bluetooth Pantograph Keyboard TK FBP014E series User s Manual Thank you for purchasing the ELECOM Bluetooth Pantograph Key board This product is a wireless keyboard for use with Bluetooth wireless technology This manual describes the operating instructions and safety precau tions for using this product Ensure that you have read this manual before using the product After reading this manual store it some where safe for future reference Except in certain cases TK FBP014E series is referred to as this product in this manual E Meaning of symbols Z WARNING Failure to observe precautions may result in seri ous personal injury or death due to fire electric shock or other causes Failure to observe precautions may result in personal injury due to electric shock or other causes and may damage other equipment A N CAUTION S Prohibited action Q Mandatory action Q Situation that needs attention Q Notes and reference information Useful information Package Contents This product s packaging contains the items listed below Before using the product check that all items are present We make every effort to ensure that all products are packaged correctly However in the event that an item is missing or damaged contact the retailer from whom you purchased the product e Keyboard x1 e AA alkaline battery x2 e User s Manual x1 Safety Precautions Observe these
7. dd a Device a a The Add a Device window is meen displayed Join a Personal Area Network Open Settings Remove Icon Customize NA e f is displayed is the notification area right click and click Add a Device e f no icon is displayed click the Start button click Control Panel and then click Add a Device D gt Hold down the key raa and the F1 key on this sadici asto wis compuer A E E A A aaa anaa and then press the CON NECT button on the bottom of the keyboard Pressing the CONNECT button at the same time is not required When using this product with multiple Bluetooth devices press a key from F2 to F9 in place of F1 The key that is pressed at this point will register the Blue tooth device that is currently being paired Usage scenario Possible to use various devices interchangeably by using the Fn key a key from F1 to F9 gt CONNECT button S amp The Connect Battery lamp flashes during the pairing procedure and turns off when the procedure is complete step 5 B gt Click TK FBP014series and then click l A code will be displayed on the screen Use this product to enter paa the code that displays on ET th e screen Thc wil verily thit you ave connecting to the covet device After the code has been entered using the number Darde stream oge T keys on t
8. demarks owned by Bluetooth SIG Inc and used with permission by ELECOM Co Ltd e Company names product names and other names in this manual are generally trademarks or registered trademarks 2012 ELECOM Co Ltd All Rights Reserved
9. e Keyboard Turn on the keyboard to use it 1 Slide the power switch on the bottom of the keyboard to the ON position ON OFF CONNECT NA When not using the product turn the keyboard off to save battery power Slide the power switch to the OFF position ON OFF CONNECT Power save mode When key input does not occur for approximately two hours this product will automatically switch to power save mode It will return to normal mode once any key is pressed Enter characters after this has occurred QD Connected device selection key Pressing a key from F1 to F9 while holding down the Fr key will select the Bluetooth device that has been registered to that key Allows this product to be used with the selected Bluetooth device Connect Battery lamp e Flashes when the keyboard is in a pairing standby state 1 second ON 1 second OFF e Indicates when to replace the batteries The lamp lights up if the remaining battery level gets low during use 1 second ON 3 seconds OFF PC1 PC2 switch key wake Se me Connect Battery Sys Rq Scr LK Break Pressing the Tab key while ho
10. g so may interfere with flight safety Turn off the keyboard before boarding an aircraft and do not use it in the aircraft ELECOM is not liable for any accident or social damages incurred by the failure of this product O OG Initial Setup Procedure When using this product for the first time operate and configure this product in the order shown below To use this product the connected device must support the Bluetooth HID profile or have a Bluetooth adapter that supports the HID profile connected f Installing Replacing the Batteries v PA Turning on the Keyboard v k Pairing the Keyboard with a Connected Device Refer to the back of this sheet ly Installing Replacing the Batteries t Pairing the Keyboard with a Connected Device To connect this product to a connected device using Bluetooth you need to pair the product with the connected device Before using this product install two AA batteries in the keyboard 1 Remove the battery cover from the bottom of this product While holding down the clasp lift up to remove e Make sure that the polarity is correct e Do not mix different types of batteries or use old bat teries with new batteries to avoid battery leakage and failure gt Install the battery cover Insert the tabs into the holes on the body of the keyboard and set it in the cover while pressing the clasp PA Turning on th
11. he keyboard press the Enter key S If the code could BE not be ente red com Adding this device to this computer failed pletely the window eses on the right will be gt displayed earl Ciok v n and then repeat the operation starting from procedure Once the code is properly F entered the window on the right will be displayed i W Click cose Zz You can now use the keyboard E If using Windows Vista SP2 1 In the notification area right click the Bluetooth icon Add a Bluetooth Device Show Bluetooth Devices and click Add a Bluetooth oo Device Receive a File Join a Personal Area Network The Add Bluetooth Device Open Bluetooth Settings Wizard is displayed A eee ee o M Q If the icon is not displayed click the Start button click Control Panel click Hardware and Sound and then click Bluetooth Devices When the Bluetooth Devices window is displayed click Add D Hold down thelrnjkey C and the F1 key on this product simultaneously and then press the CON NECT button on the bottom of the keyboard Pressing the CONNECT button at the same time is not required Select a wireless device to pair with this computer When using this product with multiple Bluetooth devices press a key from F2 to F9 in place of F1 The key that
12. ible to avoid Za the band of mobile object identification systems FH SS is used for the radio wave method The interference distance is 10 m The 2 4 GHz band is also used by medical equipment and wireless LAN equipment conforming to the IEEE 802 1 1b 11g 11n standard e Before using this product check that there are no other radio sta tions operating nearby e f electromagnetic interference occurs between this product and other radio stations move this product to another location or stop using this product Other radio stations refer to industrial scientific and medical devices using the 2 4 GHz band like this product other radio sta tions of this type licensed radio station premises for mobile object identification system that is used in factory production lines certain non licensed low power radio stations and amateur radio stations WARNING e Do not use this product with any device that may have a serious impact in the event of a malfunction There are rare cases where an external radio wave at the same frequency or the radio wave emitted from a mobile phone causes this product to malfunction slow down or fail to operate Do not use this product in a hospital or other locations where the use of radio waves is prohibited The radio waves of this product may affect electronic and medical devices e g pacemaker The use of a wireless keyboard in an aircraft is prohibited by aviation law because doin
13. io Possible to use various devices interchangeably by using the Fn Fn key a key from F1 to F9 off when the procedure is complete D step P CONNECT it oS Ms NA If this product is not displayed in the list check that its power is turned on press the CONNECT button and hen click ial 4 Click TK FBP014series and then click The the Connect Battery lamp flashes during the pairing procedure and turns Ne So Add Bluetooth Device Wizard Select the Bluetooth device that you want to add g 4 Ifyou dont see the device that you want to add make sure that itis tumed on Follow the setup instructions that came with the device and then click Search Again Search Again 5 Select Choose a pass Add Bluetooth Device Wizard key for me and then click vee A passkey will be displayed on the screen Do you need a passkey to add your device g oaen question refer to the Bluetooth section ee Ser oe ae your device Ifthe documentation specifies a passkey u Choose a passkey for me Use the passkey found in the documentation O Let me choose my own passkey O Dont use a passkey You should always use support one We recommend using a pa ae Se aaam long The Bonsen more secure it wil be lt Back l Nex gt 6 Use this product to enter peitma the passkey that displays T Tnm on the screen When instructed below enter the passkey using your B
14. is pressed at this point will register the Blue tooth device that is currently being paired Usage scenario Possible to use various devices interchangeably by using the fn key a key from F1 to F9 The Connect Battery lamp flashes during the pairing procedure and turns off when the procedure is complete step 5 Ne CONNECT button Dy Click TK FBP014series and then click Pair with a wireless device Select a wireless device to pair with this computer Z Use this product to enter the code that displays on Type the following code into your device the SC reen P This will verify that you are pairing with the correct device 77393802J After the code has been entered using the number keys on the keyboard press the Enter key Q If the code could not be entered com pletely the window on the right will be displayed Click tain and then repeat the operation startin from procedure 3 Once the code is properly entered the window on the scans right will be displayed nnn ig enn en cn oe ih BH Click cles You can now use the keyboard E If using Windows Vista SP1 and earlier or Windows XP The screen will differ depending on the OS but the procedure is the same 7 In the system tray or the no tification area right click the Smem suewonmvevices Bluetooth icon and click Se
15. lding z 7 yA Wa S7 down the key will alternate the Blue eh x tooth device that has been registered to lt the F1 key with the Bluetooth device that U J has been registered to the F2 key JN IS JN J A Home Pg Up Alphanumeric Kana key v a Switches the character input mode for 4 5 6 the iPad iPhone iPod touch to Caps Lock Steer p gt Alphanumeric English input or J S Kana Japanese input L JN JN JU J la gt la Ni F gt ala a Y AO bra i 1 2 3 gt shift A A key Function key shin End y Pg Dn Ne a tin Nea S V I J J ae J Pi ra Nef gt A a While the key is held down the func 4 y x 0 tions indicated in the on the bottom of ome nd other keys can be used ew home E Le ee Del Enter J J P IN D Pressing a key from F1 to F9 while holding down the Fen key will select the Bluetooth device that has been registered to that key lt i nection with a registered device e Pairing involves registering Bluetooth devices in this case this product and connected device with each other and authorizing a con e This product can register and can be used interchangeably with multiple devices Refer to the back of this sheet for details on using devices other than the iPad iPhone iPod touch Using iPhone iPad iPod touch The instructions below are based on iPhone 4 iOS 4 3 user inter face The procedure is the same
16. luetooth device For more information about entering a passkey see the documentation that came with your device Enter the passey using the SALSA CL ag Io keyboard numerical keys and press the Enter key soap pera ae Note You might need to press ENTER after typing the passkey on a Bluetooth keyboard YQ If the passkey was Add Bluetooth Device Wizard n ot ente re d cor Completing the Add Bluetooth Device Wizard rectly the screen shown to the right will display Click a and then repeat the operation starting from procedure jas unable to exchange passkeys with your The device has indicated a passkey exchange failure might have entered an incorect pas key or the time to Mat passkey might have expired Click Back and attempt the passkey exchange agai To close this wizard click Cancel lt Back Once the passkey iS prop gars erly entered the window on Completing the Add Bluetooth Device Wizard the right will be displayed Y ma Fp Click L is whenever they are near each To close this wizard click Finish TK FBP014series will be added to Siete Dees Devices Options COM Ports Hardware the Bluetooth Devices window Sannan B cick x _ You can now use the keyboard Troubleshooting When the keyboard does not work correctly E When text cannot be entered or keyboard does not work is unstable gt When ke
17. ments e n a car exposed to sunlight a place exposed to direct sun light or a place that becomes hot around a heater etc e In amoist place or a place where condensation may occur e In an uneven place or a place exposed to vibration e In a place where a magnetic field is generated near a magnet etc e In a dusty place This product does not have a waterproof structure Use and store this product in a place where the product body will not be splashed with water or other liquid Rain water mist juice coffee steam or sweat may also cause product damage e Do not use this product with any device that may have a serious impact in the event this product fails e When you no longer need to use this product be sure to dispose of it in accordance with the local ordinances and laws of your area QD E Batteries XCAUTION Use AA alkaline batteries AA manganese batteries or rechargeable AA nickel hydride batteries with this product If this product will be unused for a long period of time remove the batteries to avoid battery leakage and failure E Cleaning the Keyboard If the product becomes dirty wipe it with a soft dry cloth Q Use of a volatile liquid paint thinner benzene alcohol etc may affect the material quality and colour of the product Cautions for Wireless Equipment This product is wireless equipment using the entire range of the 2 4 GHz band and it is poss
18. nction for various keys and the actual functions which they perform when pressed may differ iOS 4 0 or later iPhone OS 3 2 iPad Upgrade to iOS 4 0 or later is required when used with the iPhone 3GS or the 3G iPod touch Mac OS X 10 5 10 5 8 10 6 10 6 8 107 10 7 2 Windows 7 including SP1 Vista SP2 XP SP3 Bluetooth wireless Supported OS Connection method Compliant standard Bluetooth v2 0 Class 2 Profile HID Human Interface Device Profile Radio frequency 2 4 GHz bandwidth Radio wave method FH SS modulation Radio wave outreach Non magnetic substance e g wooden desk Approx 10 m Magnetic substance e g metal desk Approx 3 m Values indicated are those obtained by ELECOM and are not guaranteed No of keys 99 US layout Dimensions 389 5 W x 180 75 D x 25 0 H mm Operating temperature 5 to 40 C 90 RH max no condensation humidity Storing temperature 10 to 60 C 90 RH max no condensation humidity Batteries x2 AA alkaline manganese rechargeable nickel hydride batteries Operating time Measure of operating time when alkaline battery is used Approx 3 months ELECOM CO LTD 1 1 Fushimi machi 4 Chome Chuoku Osaka Japan 541 8765 URL http www elecom co jp global overseas elecom co jp BES Lis ADARA Hei trit K 232288 O65 FS RERA fag 86 21 3368001 1 FAX 86 21 64271706 URL http www elecom china com ELECOM Korea Co
19. nd a File Add a Bluetooth Device Receive a File The Add Bluetooth Device Wizard __79i7 a Personal Area Network is displayed Open Bluetooth Settings Remove Bluetooth Icon Na If the icon is not displayed click the Start button click Control Panel click Hardware and Sound Print ers and Other Hardware and then click Bluetooth Devices Pressing the CONNECT button at the same time is not required When the Bluetooth Devices window is displayed click Add 2 Select the My device is Add Bluetooth Device Wizard set up and ready to be aoe found check box and then click _Net gt _ The system will start search ing for Bluetooth devices to add Before proceeding referto the Bluetooth section of the device documentation Then set up your device so that your find it onthe ars bata pet rh vice is set up and ready to be found Add only Bluetooth devices that you trust 3 While the torch icon 9 is ane displayed holddownthe tS key and the F1 key on this product simultaneously and then press the CON NECT button on the bottom of the keyboard ions that came e paek lt Back When using this product with multiple Bluetooth devices press a key from F2 to F9 in place of F1 The key that is pressed at this point will register the Blue tooth device that is currently being paired Usage scenar
20. one 3GS or iPod touch cannot find the keyboard check that the software has been updated to iOS 4 0 6G Use this product to enter the PIN code that displays on the screen Enter the PIN code using the keyboard numerical keys and press the Enter key TK FBP014series would like to pair with your iPhone 4 Enter the PIN code 8864 on TK FBP014series followed by the return or enter key Cancel Connection Unsuccessful Na If the PIN code was not entered correctly the screen shown to the right will display Touch OK and repeat OK from step 3 Make sure TK FBP014series is turned on and in range 7 Pairing is completed successfully Lon E when TK FBP014series is shown Bluetooth as Connected You can now use the keyboard If connection fails Connection may fail depending on iPad iPhone iPod touch status In such cases re connect by following the procedure below J Touch Settings D gt Touch General B Sounds gt B Brightness gt es Wallpaper gt E4 Mail Contacts Calendars gt Phone gt Safari gt g Messages gt FBl iPod gt 3 Touch Bluetooth Settings General About gt Usage 1h 29m gt Network gt Bluetooth On gt Spotlight Search gt Auto Lock 1 Minute gt Passcode Lock Off gt _ Restrictions Off gt Touch TK FBP014series Not Connected TK FBP014s Not Connected
21. y input does not occur for approximately two hours this product will switch to power save mode Enter characters after pressing any key to return to normal mode gt Check that this product and the connected device s Bluetooth func tion or Bluetooth adapter are turned on gt Check pairing status to ensure that this product is paired correctly with the connected device and that pairing has not been can celled Na e The the Connect Battery lamp flashes during the pairing procedure and turns off when the procedure is complete e For details on Bluetooth connection devices and Bluetooth adapters refer to the relevant instruction manuals Alternatively contact the manufacturer gt The connected device and the keyboard are too far apart or there is a possibility that the connected device is facing in a direction from which it cannot receive radio signals Adjust the position of the con nected device The operable range of this product is the area within a circle with a radius of 10 m from the connected device Depending on the usage envi ronment the keyboard may not operate even when it is within approximately 10 m of the connected device In such cases move the keyboard closer to the connected device until operation stabilises gt When using this product on a metallic surface such as a steel desk radio wave outreach may be shortened In such cases move the keyboard closer to the connected device until Ke
22. yboard operation stabilises gt Interference may occur if multiple units of this product are used together or if this product is used with other wireless devices In this case change the channel of other wireless devices gt Operation becomes unstable when battery power is low Refer to Installing Replacing the Batteries and replace the batteries as soon as possible e The alkaline batteries supplied with this product are for check ing product operation These batteries may discharge and drain during storing and shipping e When the remaining battery level gets low the Connect Battery lamp lights up When not using the product turn the keyboard off to save bat tery power gt Check that the device that you wish to use with this product has been registered Simultaneoulsy press the key and any key from F1 to F9 and then select the registered device Basic Specifications Product name Article No Supported devices Approximately 10 m Bluetooth Pantograph Keyboard TK FBPO14E series iPad2 iPad iPhone4 4S 4G iPod touch 3G iPod touch 32GB 64GB For Bluetooth HID profile devices A Bluetooth adapter that supports HID profiles is required when using a PC that does not support Bluetooth HID profiles Playstation 3 System software ver 4 00 Can not be used with iPhone 3G or first and second generation iPod touch Depending on the model of the device being used the assigned fu
Download Pdf Manuals
Related Search