R5101-R5108 1-channel receiver user manual
Contents
1. user manual V4 Version AO IV Set up and working process 4 1 Learning transmitter Press the learning button S1 of the receiver then LED is red Press any one of the transmitter twice times LED flickers and continues on several seconds then turns into green It is indicated the learning is successful 4 2 Deleting transmitter Press the learning button S1 for a long time the indicating lamp is red for 8 seconds and then turns into green release the learning button LED is red for 2 seconds and then turns into green it is indicated the deleting is successful 4 3 Latch and non latch It is non latch when DIP at Non Latch It is latch when DIP at Latch 4 4 Self learning function Use the transmitter that already has been learned as mother transmitter it can start the learning function and learn new transmitter without pressing any learning button Press button 1 and button 2 at the same time and then press button 2 to let the receiver enters into the learning process SIEro STEP 1 STEP2 Press the same button on 2 Use the trasmitter 2 2 that al wh then press button the new transmitter at alrea as z f 3 4 d 3 d 2 to Lat LED twice The learning been learned as old turns into red gt process done In this way transmitter press New transmitter t itt b new transm er can be button 1 and button can be learned learned without pressing 2 at the same time A iii the learning button on Old one Old one Ne2. 1 2 ae 4 oe R5101 R5108 user manual V4 Version AO R5101 R5108 1 channel receiver user manual Safety Instruction For security please read instructions carefully before initial operation making sure that the power is off before connection Please clear the memory before initial operation Ref Erasing ALL learned memorized Transmitters Do not learn the remote control when motor is operating in order to avoid mis operation The received signal may be interfered by other communication devices e g the wireless control system with the same frequency range It is forbidden to control the high risk coefficient equipment system e g cranes 6 It is used only for the manual remote control and wireless control equipment system which must not endanger life or property during running failure or its security risks have been eliminated 7 It should be applied in dry indoor place or in the electric appliance place 8 If connected wire is too long the receiver may work unstable ll Technical parameters 1 Working voltage 12 24VAC DC 2 Temperature range 20 C to 60 C 3 Working frequency 433 92MHz 4 Stored transmitters Rolling code 30 300PCS fixed code 60 600PCS 5 Relay contact load capacity 1A 30V DC Ill Connection Instruction t l EG 8 7 5 Receive module R2500 12 24 We COM 12 249 NC COM NO AC DC oan AC DC Receiver R5101 R5103 Receiver R5102 R5104 Rol05 Rol0 R5106 R5108 R5101 R5108
3. w one the control board 4 5 Remote control The remote that finish the learning process can control the receiver with pressing the button 4 5 1 Non latch DIP at Non latch 4 5 2 Latch DIP at Latch STOP STOP Receiver COM NCON COM NO OFF Press transmitter button 1 Receiver COM NC OFF COM No ON Receiver COM NCON COM NO OFF Press transmitter button 1 Receiver COM NCON COM NoON Release transmitter button 1 Press transmitter button 1 V Model list MODEL 12 24V AC DC R5101 R5102 R5103 R5104 R5105 R5106 R5107 R5108 mere 3030 at a0 o o
Download Pdf Manuals
Related Search