Home

Ports and controls

1. gt Press the ON OFF switch 1 for about one second to switch the device on L The power on indicator 2 lights up whenever the system is switched on gt During installation follow the instructions on screen 22 Fujitsu Fujitsu First time setup of your device If a Windows operating system is installed on your device you will find more information on the system and drivers help programmes updates manuals etc on the device This information can also be found on the Internet at http www fujitsu com fts support You can find information and help on the Windows operating system functions on the Internet at http windows microsoft com If a Windows 8 1 operating system is installed on your Tablet PC a tutorial is automatically started when a new user logs on for the first time which shows you how to use the new functions of Windows 8 1 23 Working with the Tablet PC Working with the Tablet PC This chapter describes the basics for operating your Tablet PC You can find instructions on how to connect external devices e g mouse flash memory to the Tablet PC in the chapter Connecting external devices Page 69 Please refer to the notes in Important notes Page 12 Status indicators The status indicators 1 2 provide information about the status of the power supply the drives and the keyboard functions etc Power on indicator The indicator lights up
2. Troubleshooting Chip card inserted incorrectly gt Make sure you have inserted your SmartCard into the SmartCard reader with the chip facing upwards gt Check whether the SmartCard you are using is supported Your SmartCard must comply with the ISO standard 7816 1 2 3 and 4 SmartCard PIN forgotten PIN forgotten gt If you work in a network contact your system administrator who can unlock your Tablet PC with a supervisor PIN User and or supervisor SmartCard lost User and or supervisor SmartCard lost gt If you have lost your User SmartCard you can continue working with the Supervisor SmartCard and initialise a new User SmartCard or deactivate the SystemLock function If you have lost the Supervisor SmartCard you can continue working but you no longer have all your rights and can no longer initialise a Supervisor SmartCard If you have lost both SmartCards you can no longer boot your system Please contact our Service Desk You must provide proof of ownership for the device Then the Service Desk will refer you to our service partner who will unlock your device for a charge SmartCard lost SmartCard lost gt If you work in a network contact your system administrator who can boot your Tablet PC with a Supervisor SmartCard Fujitsu 81 Troubleshooting and tips Acoustic warnings Cause A beep sounds every few seconds gt Charge the battery The battery is almost flat
3. export license This device complies with Part 15 of FCC Rules as well as ICES 003 B NMB 003 B Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesirable operation Modifications not expressly authorised by Fujitsu Technology Solutions may invalidate the user s right to operate this equipment Fujitsu 93 Index Index A Acoustic error messages 82 Audio ports 72 B Battery battery life 38 caring for and maintaining 38 charge level 38 39 charging 38 Battery status meter 38 Battery discharges too quickly 80 BIOS Setup Utility calling 73 exiting 75 operating 74 protecting with password 64 settings 73 Bluetooth safety notes 12 Buffer battery load 77 c CE marking 88 Cleaning 16 Configuration BIOS Setup Utility 73 Connecting audio devices 72 Connecting headphones 72 Cradle 47 Connecting a Tablet PC 48 D Date is incorrect 77 Declaration of conformity 88 Device setting up 21 Devices connecting 69 disconnecting 69 Display orientation selecting 28 DOC INDUSTRY CANADA NOTICES 90 E Electromagnetic compatibility 88 Energy energy saving 13 Energy saving 13 Energy saving mode 94 leaving 79 Error message on the screen 82 Error messages on the screen 82 Errors Acoustic warnings 82 Ethernet LAN 45 F Fault correction 76 Finger
4. note that the user password only provides access to a few of the BIOS settings Tyv 64 Fujitsu Security functions Changing the supervisor or user password You can only change the supervisor password when you have logged into the BIOS Setup Utility with the supervisor password gt Call the BIOS Setup Utility and go to the Security menu gt When changing the password proceed exactly as for password assignment Removing passwords To remove a password without setting a new password perform the following steps Start the BIOS Setup Utility and go to the Security menu Highlight the Set Supervisor Password or Set User Password field and press the Enter key You will be requested to enter the current password by the Enter Current Password prompt You will be requested to enter a new password by the Enter New Password prompt Press the Enter key twice In the Exit menu select the option Save Changes amp Exit Select Yes and press the Enter key The Tablet PC is rebooted and the password is cancelled Removing the supervisor password simultaneously deactivates the user password ryvy Password protection for booting of the operating system With the supervisor password you have set in the BIOS Setup Utility see section Setting supervisor and user password Page 64 you can also prevent booting of the operating system Activating system protection Start the BIOS Setup Utility
5. please check with your sales outlet However you should prevent water or dirt from penetrating the Tablet PC and prevent accessories from becoming wet or dusty AC adapter Cradles pen or other accessories are neither watertight nor dust proof Do not use them in a bathroom in a very humid environment or in locations in which it can rain Only use cleaning products designed for computers Conventional household cleaners and polishes can damage the label on the Tablet PC the paint or the Tablet PC itself Only clean the display surface with a very soft slightly damp cloth Rough rubbing with a dry cloth can damage the screen Residual water drops or dirt on the monitor can cause staining If the Tablet PC is cleaned with alcohol thinner petrol or solvent the label can become illegible or the paint can start to bubble gt Switch the Tablet PC off gt Shower the Tablet PC from above with tap water and shield the connection covers with your hand Do not use any brushes sponges cleaning agents etc Do not use too heavy a flow of water Do not use hot water from the tap or shower Do not use the Tablet PC if mud or sludge are stuck to it First remove the dirt by holding the Tablet PC under running water several times Fujitsu Fujitsu Important notes After washing the Tablet PC place it on a flat solid surface and wipe away the moisture on the front and rear sides with a clean dry cloth gt Hold the Tab
6. BIOS Setup Utility You need to select the desired option in the Exit menu and activate it by pressing the Enter key Exit Saving Changes save changes and exit BIOS Setup Utility gt To save the current menu settings and exit the BIOS Setup Utility select Exit Saving Changes and Yes 1 The Tablet PC is rebooted and the new settings come into effect Exit Discarding Changes Discard changes and exit BIOS Setup Utility gt To discard the changes select Exit Discarding Changes and Yes L The settings in place when BIOS Setup Utility was called remain effective The BIOS Setup Utility is terminated and the Tablet PC is rebooted Load Setup Defaults Copy Standard Entries gt To copy the standard entries for all menus of the BIOS Setup Utility choose Load Setup Defaults and Yes Discard Changes Discard changes without exiting the BIOS Setup Utility gt To discard the changes you have made select Discard Changes and Yes 15 The settings in place when BIOS Setup Utility was called remain effective You can now make additional settings in the BIOS Setup Utility gt If you want to exitB OS Setup Utilitywith these settings select Exit Saving Changes and Yes Save Changes save changes without exiting the BIOS Setup Utility gt To save the changes select Save Changes and Yes L gt The changes are saved You can now make additional settings in the BIOS Setup Utility gt If you want to exit BIOS Setup Utility
7. a location 21 Setup see BIOS Setup Utility 73 Slot Memory cards 40 Status indicators 24 Summer time 77 Supervisor password changing 65 entering 64 removing 65 Suspend Resume button 25 Switching on for the first time 22 Symbols indicators 24 System configuration 73 System settings BIOS Setup Utility 73 T Tablet PC before you travel 14 cleaning 16 switching off 26 transporting 14 using 24 Tablet PC operation 24 Tablet PC switching on 25 Technical data Mains adapter 85 The radio connection to a network does not work 80 The Tablet PC cannot be started 79 doesn t work 79 Time not correct 77 Time daylight savings 77 Tips 76 Touchscreen cleaning 16 difficult to read 77 notes 27 reflected glare 77 remains blank 77 touchscreen is too dark 77 TPM 68 Transport Transport damage 20 95 Index Transportation 14 V Travel Tablet PC 14 VGA connection socket 70 Troubleshooting 76 Trusted Platform Module 68 Webcam 37 U Wireless LAN USB ports 71 safety notes 12 User password changing 65 entering 64 removing 65 96 Fujitsu
8. blue The Tablet PC is switched on The indicator flashes blue The Tablet PC is in sleep mode Save to RAM The indicator flashes blue and white The Tablet PC is in S3 mode and the wireless function Wi Fi or WWAN is ON The indicator flashes white The Tablet PC is in S4 or S5 mode and the wireless function Wi Fi or WWAN is ON The indicator is not lit The Tablet PC is switched off or in Save to Disk mode Battery charging indicator The indicator lights up red The mains adapter is connected The indicator flashes red The battery has a charging fault e The indicator is not lit The mains adapter is not connected 24 Fujitsu Working with the Tablet PC Switching on the Tablet PC gt Press the ON OFF switch 1 for about one second to switch the device on L gt The power on indicator 2 lights up whenever the system is switched on Programming the ON OFF switch You can program the ON OFF switch Operating system Windows 7 Start Settings Control Panel System and Security Power Options Windows 8 1 Windows 8 1 Desktop Control Panel Hardware and Sound Power Options If you have assigned a password you must enter this when requested to do so in order to start the operating system Detailed information can be found in the chapter Security functions Page 62 Fujitsu 25 Working with the Tablet PC Switching off the Tablet PC Back up your data and close all application
9. different screen orientations These profiles have preset standard configurations that can be modified as desired These settings do not just affect the monitor settings on the Tablet PC but also any external monitors that may be connected Using fingers You can execute certain commands by using your finger tip on the touchscreen of your device Everything which you can select or activate using your finger tip can also be selected or activated using the stylus pen El Calibrate the Dual Digitizer for finger based operation of the device If Windows 8 1 is installed on your Tablet PC your Tablet PC is already calibrated at initial setup If a different operating system is installed on your Tablet PC you must calibrate it with your fingers before first use so that it recognises your fingertips as accurately as possible As soon as you notice that the accuracy is deteriorating you must recalibrate the device Operating aystem Windows 7 To calibrate call up the Hardware and Sound Tablet PC Settings function Windows 8 1 Desktop in the Control Panel You need to calibrate both portrait and landscape formats 28 Fujitsu Working with the Tablet PC Actions with one finger Windows 8 1 Modern Wipe your finger over the screen from the right hand edge Wipe your finger over the screen from the left hand edge Wipe your finger over the screen from the top or b
10. does not correctly follow the pen movements 78 P n input NOt Working Lise ced ae guia Solita op ange a 79 The Tablet PC does not start after switch on 79 The Tablet PE Stops working ane aa ed eee ean eek eee es 79 The printer does not print 80 The radio connection to a network does not work 80 The battery discharges too quickly 2 80 SmartCard reader is not recognised 81 SmartCard PIN forgott n 2212222400 samba nn eee bdo Peed MASE benne 81 User and or supervisor SmartCard lost 81 SmartCard lost prenne decay ey Rae one DE bent dt 81 Acoustic WamMningS nt eee ean eee nee 82 Error messages the screen 82 Technical data te eons bbevtsaaet see 84 Tablet PGs oigeir PRO NE EA n nb 84 Rechargeable battery 2 eee MAA AAA fea oe ch ea edd bbe baa 85 Mains adapter 65 W usine gear we bet ana E E T a Webel aed 85 Multi functional Cradle optional 0 00
11. ete end ad deen enna autre 8 Ports and controls 4use 9 Important notes 3 12 1ecrrcosvmnecnmectnt teens a 12 Sally NOLS hed sce ek ie Sitting DDR ne RTE MAR ANA AT a a rer rss 12 Additional safety notes for devices with radio components 12 Protecting the display screen 44442222 13 En rgy SAVINd EEE sin saone te a a re ts is 13 Energy saving under Windows 13 Travelling with your Tablet PC 2222S 14 B fore you travel cece cack ans area eet saan 14 Transporting the Tablet PC 2202 14 Watertight dust protected device dependent 15 Cleaning the Tablet PC rann E EEI a ee edd utd 16 Further information on cleaning the Tablet PC 2 1 0 ene eae 18 Cleaning with disinfectant wipes 19 First time setup of your device 0c cece eect eee 20 Unpacking and checking the device 20 Selecting a location E shee LEE ELA ASSAULT 21 Mains adapter connecting 21 Switching on the
12. first check with the flight attendants whether this is permissible When travelling in other countries gt If you are travelling abroad check that the mains adapter be operated with the local mains voltage If this is not the case obtain the appropriate mains adapter for your Tablet PC Do not use any other voltage converter gt Check whether the local mains voltage and the power cable are compatible If this is not the case buy a power cable that matches the local conditions gt Enquire with the corresponding government office of the country you will be travelling in as to whether you may operate the radio component integrated in your Tablet PC there also see CE marking Page 88 Transporting the Tablet PC Protect the Tablet PC from severe shocks and extreme temperatures A e g direct sunlight in a car Switch off the Tablet PC Unplug the mains adapter and all external devices from the power socket Disconnect the mains adapter cable and the data cables for all external devices To protect against damaging jolts and bumps use a Tablet PC carrying case to transport your Tablet PC vvvyv 14 Fujitsu Important notes Watertight dust protected device dependent Depending on your configuration your Tablet PC is watertight in accordance with IPX5 IPX8 and dust protected in accordance with IP5X protective glass against dust deposits The slot covers however must be securely sealed in the event of co
13. in situations where the interference risk to other devices or services is perceived or identified as harmful In cases in which the policy regarding use of radio devices in specific environments is not clear e g airports hospitals chemical oil gas industrial plants private buildings obtain authorization to use these devices prior to operating the equipment Regulatory Information Disclaimers Installation and use of this radio device must be in strict accordance with the instructions included in the user documentation provided with the product Any changes or modifications made to this device that are not expressly approved by the manufacturer may void the user s authority to operate the equipment The manufacturer is not responsible for any radio or television interference caused by unauthorized modification of this device or the substitution or attachment of connecting cables and equipment other than those specified by the manufacturer It is the responsibility of the user to correct any interference caused by such unauthorized modification substitution or attachment The manufacturer and its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failure to comply with these guidelines Export restrictions This product or software contains encryption code which may not be exported or transferred from the US or Canada without an approved US Department of Commerce
14. requirements Depending on the particular configuration you have purchased it is possible that functionality may be slightly reduced compared to a desktop PC if you are running processor intensive gaming software e g games with intensive 3D graphics Updating your hardware with drivers which have not been approved by Fujitsu Technology Solutions may result in performance losses data losses or malfunction of the equipment A list of approved drivers and current BIOS versions can be downloaded from http support ts fujitsu com Download Index asp Our Tablet PCs have been designed primarily with mobile applications in mind This Help if problems occur Should you encounter a problem with your computer that you cannot resolve yourself gt Note the ID number of your device The ID number is found on the type rating plate on the back or underside of the casing gt For further clarification of the problem contact the Service Desk for your country see the Service Desk list or visit the Internet at http support ts fujitsu com contact servicedesk ServiceDeskNumber_Int asp When you do this please have ready the ID number and serial number of your system 76 Fujitsu Troubleshooting and tips The Tablet PC s date or time is incorrect Cause Cause Troubleshooing Time and date are incorrect gt With the BIOS Setup Utility you can set the date and time in the main menu Date and time are still set inco
15. restarts and the TPM is switched on after the reboot Disabling TPM VVVVY 68 Requirement You have assigned a supervisor password see Security functions Page 62 Call up the BIOS Setup and select the Security menu Mark the TPM Security Chip Setting field and press the Enter key Select Disabled to deactivate the TPM From the Exit menu choose the option Exit Saving Changes Press the Enter key and select Yes The Tablet PC is rebooted and the TPM is disabled Fujitsu Connecting external devices Connecting external devices Under all circumstances please observe the safety notes provided in the Important notes Page 12 chapter before connecting or disconnecting any devices to or from your Tablet PC Always read the documentation supplied with the device you wish to connect Never connect or disconnect cables during a thunderstorm Never pull at a cable when disconnecting it Always grasp the plug Adhere to the order described below when you connect external devices to the Tablet PC or separate them from it With some devices such as USB devices it is not necessary to switch off the Tablet PC and the device before connecting disconnecting For more information about whether or not devices need to be switched off please refer to the documentation supplied with the external device Some of the external devices require special drivers see the operating system and external device documentation Connect
16. same time If your notebook was shipped with Windows 8 1 the adaptive brightness setting is deactivated To change the ambient light sensor settings select Control Panel System and Security Power Options Change plan settings Change advanced power settings Display Activate adaptive brightness setting Select On to activate the adaptive brightness setting with the help of the ambient light sensor Synchronising the display on the touchscreen and an external monitor In Windows 7 you can switch between touchscreen and external monitor if you open Control Panel Windows Mobility Center section External Display In Windows 8 1 wipe your finger over the screen from the right hand edge The setting Charms Devices Second monitor opens Select the desired output type You can also use the Fujitsu Display Manager in the Windows Mobility Center to set the output type Fujitsu 27 Working with the Tablet PC Select display orientation portrait or landscape orientation You can choose to use either portrait or landscape orientation for the display Windows 7 You can change these settings in the Fujitsu menu or under Start Settings Control Panel Hardware and Sound Display Settings Windows 8 1 You can change these settings under Windows 8 1 Desktop Control Panel Hardware and Sound Windows Mobility Center Rotate screen In the Fujitsu Tablet Controls settings profiles are saved for operation with
17. the US Telephone Network Your Tablet PC may be supplied with an internal modem which complies with Part 68 of the FCC rules On this Tablet PC is a label that contains the FCC Registration Number and the Ringer Equivalence Number REN for this equipment among other information If requested the user must provide their telephone company with the following information 1 The telephone number to which the Tablet PC is connected 2 The Ringer Equivalence Number REN for this equipment 3 The equipment requires a standard modular jack type USOC RJ 11C which is FCC Part 68 compliant 4 The FCC Registration Number This equipment is designed to be connected to the telephone network or premises wiring using a standard modular jack type USOC RJ 11C which is FCC Part 68 compliant and a line cord between the modem and the telephone network with a minimum of 26AWG The REN is used to determine the number of devices that you may connect to your telephone line and still have all of those devices ring when your number is called Too many devices on one line may result in failure to ring in response to an incoming call In most but not all areas the sum of the RENs of all of the devices should not exceed five 5 To be certain of the number of devices you may connect to your line as determined by the RENs contact your local telephone company If this equipment causes harm to the telephone network your telephone company may discontinue your servic
18. turn the thumb grip on the pen The thumb grip is used to place the pen in its slot and to take it out of the slot e Never store the pen with the tip bearing the weight of the pen e g with the tip down in a pen holder If the pen is stored with the tip pointing down this may have an adverse effect on the pen mechanism particularly under high temperatures In this case the pen tip may react as though it is constantly being pressed down To avoid damage the pen should be stored in the pen slot when not in use The pen can be influenced by electromagnetic fields cursor quivers or jumps There may be a few areas on the screen where the cursor quivers slightly in spite of pressing the pen down firmly The screen responds to entries made with the tip of the finger or the pen when the tip of the finger or the pen is in direct contact with the screen You can use the pen to run all functions for which you would otherwise use a mouse The pen does not support erasing functions 34 Fujitsu Working with the Tablet PC Selecting menu Click with the left hand mouse button Touch the menu entry with the pen tip items Starting programs Double click with the left hand mouse Briefly touch the program icon twice button with the pen tip Moving an Drag with the left hand mouse button Place the pen tip directly on the object window held pressed object window Hold the pen tip pressed against the screen Move the desired objec
19. with these settings choose Exit Saving Changes and Yes Save Changes and Power Off gt save the changes and switch off your device select Save Changes and Power Off and Yes L gt The changes are saved Your device is shut down Fujitsu 75 Troubleshooting and tips Troubleshooting and tips Follow the safety notes in the Safety Regulations manual when A connecting or disconnecting cables If a fault occurs try to correct it as described If you fail to correct the problem proceed as follows gt Make a note of the steps and the circumstances that led to the fault Also make a note of any error messages displayed gt Switch the Tablet PC off gt Please contact the Hotline Service Desk You can find the telephone numbers in the service desk list Please have the following information ready when you call The model name and serial number of the Tablet PC The serial number is located on a sticker on the underside of the Tablet PC e Notes of any messages that appear on the screen and information on acoustic signals Any changes you have made to the hardware or software after receiving the Tablet PC Any changes have made to the BIOS Setup settings after receiving the Tablet PC e Your system configuration and all peripheral devices connected to your system e Your sales contract means that considerable effort has been made to optimise components and equipment in terms of weight space and energy
20. 36 Tablet niee reoi ve ok BEERS ANE EA aa SE ER 37 Webcast EEE SE M dard na a GG Mu ae Hide T Sa ah ol os brary Ends 37 Rechargeable battery stars cie dd Ales da dea ee earned 38 Charging and maintaining the battery 2 38 Using the power management features 39 Memory Cards eee nn cela at te 40 S upport d formals usines eee nee ER E EEE AAA 40 Inserting the memory caid rene 40 Fujitsu 3 Contents Removing the memory Card 220 41 SIM Card ree EN a ne 42 Inserting the SIM card se hence ewe RER bbe AE E RS EEE RS EEE 42 Removing the SIM sine veces Vere gps entiere MD nr Mae ak eee 43 Wireless LAN Bluetooth UMTS LTE radio components 44 Switching the wireless components on and off 44 Setting up WLAN access ole eee gee UM pas CR D D ST Masa RAR 44 Access via UMTS LTE ehhh Last adie arms one Ue sas Aiea su names Das Aa a 44 Ethernet and LAN only with Multi functional Cradle or Keyboard Docking 45 CRIS RE De ne em 45 Accessories for your Tablet PC optional 46 Your Multi functiona
21. ECOLAB Sani Cloth Active sensitive wet wipes without alcohol e ECOLAB Incides N alcohol based Bode Mikrobac Tissues sensitive wet wipes without alcohol Bode Bacillol Tissues alcohol based Dr Schumacher Descosept AF Wipes alcohol based For proper use of the disinfectant wipes please also read the manufacturer s instructions Before use please test the disinfectant wipe on a small area of the Tablet PC Some medical disinfectant wipes may leave residue on the Tablet PC which is difficult to remove again or dry out quickly Therefore dispose of the wipes after one use and do not reuse them Fujitsu 19 First time setup of your device First time setup of your device Please read the chapter Important notes Page 12 A If your device is equipped with a Windows operating system the necessary hardware drivers and supplied software are already pre installed Before you switch on the device for the first time connect it to the mains voltage using the mains adapter see Mains adapter connecting Page 21 The mains adapter must be connected during the entire installation process A system test is performed when your device is first switched on Various messages can appear The display may remain dark for a short time or may flicker Please follow the instructions on the screen NEVER switch off your device during the first time setup process The battery must be charged if you want to oper
22. Error messages on the screen This section describes the error messages generated by the BIOS Setup Error messages displayed by the operating system or programmes are described in the relevant documentation If the error message appears repeatedly despite troubleshooting measures please contact the place of purchase or our customer service centre 82 Fujitsu Troubleshooting and tips Error message cause Resolution CMOS battery bad If the error message occurs repeatedly the buffer battery in the Tablet PC is flat System CMOS checksum bad default configuration used The system configuration information is incorrect Extended memory failed at offset xxxx Failing Bits 2222 When testing the extended memory an error has resulted at the address xxxx Failure Fixed Disk n The settings of the hard disk drive are incorrect Keyboard controller error Keyboard error nn Stuck key Operating system not found Press lt F1 gt to resume lt F2 gt to SETUP This error message appears if an error occurs during the self test before starting the operating system Real time clock error nnnnK Shadow RAM failed at offset xxxx Failing Bits zzzz System battery is dead Replace and run SETUP System cache error Cache disabled System timer error Fujitsu gt Contact your sales outlet or our customer service centre Switch off the Tablet PC Switch on the Tablet PC In the BIOS Setup select the E
23. Fujitsu 39 Working with the Tablet PC Memory cards Your Tablet PC is equipped with an integrated memory card reader You can use memory cards to increase the storage of your Tablet PC Observe the manufacturer s instructions when handling the memory cards Supported formats The memory card reader supports the following formats e Micro Secure Digital Micro SD card e Micro SDHC e Micro SDXC Inserting the memory card gt Open the slot cover 1 gt Carefully slide the memory card into the slot 2 The label should be facing upward Do not apply excessive force as otherwise the delicate contact surfaces could be damaged gt Replace the slot cover 40 Fujitsu Working with the Tablet PC Removing the memory card Always remove the card properly to ensure that none of your data is lost gt Open the slot cover gt Pull the memory card out of the slot 1 gt Replace the slot cover 2 Fujitsu 41 Working with the Tablet PC SIM card A SIM card Subscriber Identity Module is a chip card which is inserted in a mobile telephone or Tablet PC and together with an integrated UMTS LTE module enables access to a mobile network the SIM card If you do not feel the SIM card engage as you insert it Please follow the instructions supplied by the provider when handling A use a pointed object to insert the SIM card Please note that the SIM card format must be micro SIM 3FF Other SIM card
24. IOS processor and Tablet PC System Advanced system settings Advanced Configuration of various hardware components such as mouse keyboard processor Security Password settings and security functions Boot Configuration of the start up sequence Exit Exits the BIOS Setup Utility Starting the BIOS Setup Utility gt Keep the Lock screen orientation tablet button pressed and switch the Tablet PC on If a password has been assigned enter the password and press the Enter key If you have forgotten the password contact your system administrator or contact our customer service centre The BIOS Setup Utility starts Fujitsu 73 Settings in BIOS Setup Utility Operating BIOS Setup Utility Press the F1 key to display help on the operation of the BIOS Setup Utility The description of the individual settings is shown in the right hand window of the BIOS Setup Utility With the F9 key you can load the default settings of the BIOS Setup Utility Use the cursor keys lt or to select the menu you wish to access to make changes The menu is displayed on the screen Select the option you want to change with the cursor keys T or Press the Enter key Press the key to exit the selected menu For future reference make a note of the changes you have made for example in this manual 74 Fujitsu Settings in BIOS Setup Utility Exiting
25. Operating manua System FUJITSU Tablet STYLISTIC Q704 FUJITSU Congratulations on your purchase of an innovative product from Fujitsu The latest information about our products tips updates etc can be found on the Internet at http www fujitsu com fts For automatic driver updates go to http support ts fujitsu com download Should you have any technical questions please contact our Hotline Service Desk see the Service Desk list or visit http support ts fujitsu com contact servicedesk Your sales partner Your sales office We hope you enjoy working with your new Fujitsu system FUJITSU Published by Contact address in the EU Fujitsu Technology Solutions GmbH Mies van der Rohe StraRe 8 80807 Munich Germany http www fujitsu com fts Copyright Fujitsu Technology Solutions GmbH 2013 All rights reserved Publication Date 11 2013 Order No A26391 K398 Z320 1 7619 edition 1 FUJITSU Tablet STYLISTIC Q704 Operating manual Innovative technology 7 Ports and controls 9 Important notes 12 First time setup of your device 20 Working with the Tablet PC 24 Accessories for your Tablet PC optional 46 Security functions 62 Connecting external devices 69 Settings in BIOS Setup Utility 73 Troubleshooting and tips 76 Technical data 84 Manufacturer s notes 88 Index 94 Remarks Information on the product description meets the design specifications
26. Password then appears and you are asked to enter a password Enter the password and press the Enter key Confirm new Password requires you to confirm the password Enter the password again and press the Enter key Setup Notice Changes have been saved is displayed to confirm that the new password has been saved To assign the password for the second hard disk Drivel go to the Drivel area and select the field Set Master Password then proceed in exactly the same way as for setting up the password for the first hard disk Drive0 The field Password Entry on Boot is set to Enabled by default You can exit the BIOS Setup once you have finished changing the settings From the Exit menu choose the option Exit Saving Changes Press the Enter key and select Yes The Table PC reboots and your hard disk is now protected with a password The password prompt is enabled as soon as the Tablet PC has rebooted Deactivating hard disk protection To T YYY vrvvy 66 cancel a password without setting a new one proceed as follows Call up the BIOS Setup and select the Security menu Mark the Hard Disk Security field and press the Enter key In the DriveO area mark the Set Master Password field and press the Enter key You will be initially requested to enter the old password by the Enter current Password prompt You will then be requested to enter a new password by the Enter new Password prompt After entering the password press th
27. and go to the Security menu Select the Password on Boot option and press the Enter key Select the desired option Disabled First Boot or Every Boot and press the Enter key Select the Save Changes amp Exit option under Exit The Tablet PC reboots You will be prompted to enter your password the supervisor password TVVYVY Deactivating system protection Start the BIOS Setup Utility and go to the Security menu Select the Password on Boot option and press the Enter key Select the Disabled option and press the Enter key If you do not want to change any other settings you can exit BIOS Setup Utility Select the Save Changes amp Exit option under Exit The Tablet PC reboots The system is no longer password protected Fujitsu 65 Security functions Password protection for the hard disk The had disk password prevents unauthorised access to the hard disk drives and is checked internally each time the system is booted The condition for this is that you have assigned at least the supervisor password Activating hard disk protection gt Ly Y TYY vY VY Call up the BIOS Setup and select the Security menu If you have not assigned BIOS passwords yet define the supervisor and the user password now if desired see Security functions Page 62 Mark the Hard Disk Security field and press the Enter key In the DriveO area mark the Set Master Password field and press the Enter key Enter new
28. ast 100 mm away from the device and its mains adapter to ensure adequate ventilation Do not expose the device to extreme environmental conditions Protect the device from dust humidity and heat Mains adapter connecting Observe the safety notes in the enclosed Safety Regulations manual Fujitsu The supplied power cable conforms to the requirements of the country in which you purchased your device Make sure that the power cable is approved for use in the country in which you intend to use it gt Open the DC jack DC IN cover gt Connect the power cable 1 to the mains adapter gt Plug the mains cable 2 into a mains outlet gt Connect the mains adapter cable 3 to the DC jack DC IN of the device 21 First time setup of your device Switching on the device for the first time On devices with ON OFF switch for wireless components Slide the ON OFF switch A for wireless components to the ON position before switching on the device When you switch on the device for the first time the supplied software is installed and configured Because this procedure must not be interrupted you should set aside enough time for it to be fully completed and connect the device to the mains using the mains adapter During the installation process DO NOT restart the device unless you are requested to do so To make it easier to use your device for the first time the operating system is pre installed on the hard disk
29. ate your device using the battery When used on the move the built in battery provides the device with the necessary power You can increase the operating time by using the available energy saving functions For instructions on how to connect external devices e g mouse printer to your Tablet PC please refer to the operating manual for your device Unpacking and checking the device Should you discover any damage that occurred during transportation A notify your local sales outlet immediately gt Unpack all the individual parts gt Check your device for any visible damage which may have occurred during transportation You may need the packaging in the future if you need to transport your device 20 Fujitsu First time setup of your device Selecting a location AN Select a suitable location for the device before setting it up Follow the instructions below when doing so Never place the device or the mains adapter on a heat sensitive surface The surface could be damaged as a result Never place the device on a soft surface e g carpeting upholstered furniture bed This can cause overheating and damage The underside of the device heats up during normal operation Prolonged contact with the skin may become unpleasant or even result in burns Place the device on a stable flat non slippery surface Please note that the rubber feet of the device may mark certain types of delicate surfaces Keep other objects at le
30. battery charging indicator shows whether the battery is being charged The indicator lights up red The mains adapter is connected and the battery is being charged The indicator lights up white The mains adapter is connected and the battery is full not charging The indicator is off The mains adapter is not connected Fujitsu 55 Accessories for your Tablet PC optional Connecting the Tablet PC to the Keyboard Docking gt Position the Keyboard Docking as shown below it engage on the connector until you feel gt Push the Tablet PC on to the Keyboard Docking in the direction of the arrow Fujitsu 56 Accessories for your Tablet PC optional Disconnecting the Tablet PC from the Keyboard Docking 1 gt Press and hold the release button on the Keyboard Docking gt Lift the Tablet PC from the Keyboard Docking in the direction of the arrow 2 57 Fujitsu Accessories for your Tablet PC optional VESA mount optional Use the VESA mount to attach the Tablet PC to a monitor with corresponding screw holes When you attach the screws use the correct tool and the correct tool size A Keep the screws out of the reach of children gt Remove the screws 1 gt Position the VESA mount on the tablet PC 2 Be sure to correctly align the holes in both VESA mount and Tablet PC gt Fasten the VESA mount with the screws 3 58 Fujitsu Accessories for your Tablet PC opt
31. cece cee eens 85 Slice Keyboard optional a eine eee gens LN ER RE ee ait del 86 Keyboard Docking optional 0c nicr ro sisara EEEN eee eens 86 VESA mount optional a ses RARE GA ideas tetera heal ele de ia 86 Hand strap optional PEER WSS ee Re eed Babee 87 Shoulder strap optional saisir siens i bD TRITONIA das eras cade yo epee eee 87 Manufacturer S Notes enner nae a ein 88 Disposal and recycling vise oe ie eh over dana oe Aaa DER Did sn eles sede 88 Declarations of Conformity 224422 88 CE marking occ cn cca ta See SR Popper 88 Regulatory notices nn 89 Regulatory information for Tablet PCs without radio device 89 DOC Industry CANADA notices 90 FCC Regulatory information for Tablet PCs with radio device 92 Re ES RC PE CN LC CE Le 94 Fujitsu 5 Contents 6 Fujitsu Innovative technology Innovative technology and ergonomic design make your device a reliable and convenient companion The device boots very quickly is ready for immediate use and offers a particularly long operating time because of its high capacity battery The user friendly BIOS Setup Utility offers powerful password protection f
32. de I I SIM card slot format micro SIM cover protected USB port USB 3 0 cover protected Headphone port watertight NO OF I 2 Memory card slot format micro Pen slot SD cover protected _ Pen strap eyelet 3 Micro USB port cover protected 10 Fujitsu Ports and controls Rear 3 options watertight without screw holes watertight with screw holes not watertight with screw holes and SmartCard reader 1 Fingerprint sensor 5 Screw holes device dependent for 2 Camera light accessory attachment 3 Webcam 6 SmartCard reader device dependent 4 WebCam LED a Important notes Important notes This chapter contains essential safety information which must be followed when working A with your Tablet PC The other notes provide useful information on your Tablet PC Safety notes Please follow the safety notes provided in the Safety Regulations manual A as well as the safety notes given below Please pay special attention to the sections in the manual marked with the symbol on the left When connecting and disconnecting cables observe the relevant notes in this operating manual Read the information on the ambient conditions in the Technical data Page 84 chapter and the information in the First time setup of your device Page 20 chapter before preparing your Tablet PC for use and switching it on for the first ti
33. de dispositifs la seule condition que la somme d indices d quivalence de la sonnerie de tous les dispositifs n exc de pas 5 AVERTISSEMENT A Pour assurer la s curit les utilisateurs doivent v rifier que la prise de terre du service d lectricit les lignes t lphoniques et les conduites d eau m talliques sont connect es ensemble Les utilisateurs NE doivent PAS tenter d tablir ces connexions eux m mes mais doivent contacter les services d inspection d installations lectriques appropri s ou un lectricien Ceci peut tre particuli rement important en r gions rurales Fujitsu 91 Manufacturer s notes UL Notice This unit requires an AC adapter to operate Only use a UL Listed Class 2 adapter The correct output rating is indicated on the AC adapter label Refer to the illustration below for the correct AC Adapter output polarity CAUTION A To reduce the risk of fire use only 26AWG or larger telecommunications line cord For Authorized Repair Technicians Only CAUTION For continued protection against risk of fire replace only with the A same type and rating fuse WARNING Danger of explosion if Lithium CMOS battery is incorrectly replaced Replace only with the same or equivalent type recommended by the manufacturer Dispose of used batteries according to the manufacturer s instructions FCC Regulatory information for Tablet PCs with radio device Federal Communications Commission stat
34. device for the first time 22 Working with the Tablet PC 444444 issues 24 Status indicators ete Ree Tees DEEE errant eee 24 Switching on the Tablet PC 44442 eeees 25 Programming the ON OFF switch 220 25 Switching off the Tablet PC 2 07 fc tex ee oo centered ax cee ideas tery een d die sois 26 Handwriting recognition bbb LA LEE Aik 26 MOUCHSCKESN sis ra en een el 27 Select display orientation portrait or landscape orientation 28 Using ess oan hee te thn neve ees Se race eee aaa a a a a a iid jad db 28 Calibrate the Dual Digitizer for finger based operation of the device 28 Actions with one finger Windows 8 1 Modern 29 Actions with one finger Windows 7 Windows 8 1 Desktop 31 Actions with two fingers Windows 7 Windows 8 1 Desktop 32 Using the Stylus pen rs pee anced Be 33 Pen POSION cies Te whee Seed E E am 35 SUING NE CA ses ANNEE 35 Calibrating the ns baw ERE nee Es 36 Installing apen Cord c7955 pyaar No
35. e Enter key three times From the Exit menu choose the option Exit Saving Changes Press the Enter key and select Yes The Tablet PC reboots and there is no longer any password protection for this hard disk To cancel the password for the second hard disk Drivel go to the Drivel area and select the field Set Master Password then proceed in exactly the same way as for cancelling the password for the first hard disk Drive0 Fujitsu Security functions SmartCard reader optional SmartCards are not supplied as standard equipment You can use all SmartCards that comply with the ISO standard 7816 1 2 or 3 These SmartCards are available from various manufacturers With the appropriate software you can use your SmartCard as an alternative to password protection but also as a digital signature for encrypting your e mails or for home banking We recommend that you always use two SmartCards Always keep one of the SmartCards in a safe place if you are carrying the other SmartCard with you In order to be able to take advantage of all the security features of your Tablet PC you will need a CardOS SmartCard from Fujitsu Technology Solutions The SmartCard can only be used with a PIN offering maximum protection even if you lose the SmartCard In order to maximise your security the CardOS SmartCard is disabled if three incorrect attempts are made to enter the PIN When you use the CardOS SmartCard for the first time you will either
36. e might not be watertight In this case A do not pour liquids on the system or wash it with a heavily soaked cloth Do not place items on the top of the display or damage may occur During normal use of the device small particles from the environment can become embedded in the pen tip and scratch the screen The warranty does not cover a scratched screen Energy saving If you will not be using your Tablet PC switch it off Switch off any connected external devices when they are not in use If you use the energy saving functions the Tablet PC uses less power You will then be able to work for longer before having to recharge the battery Energy efficiency is increased and the environmental impact is reduced You save money while protecting the environment Energy saving under Windows gt Make use of the power management features see Using the power management features Page 39 Fujitsu 13 Important notes Travelling with your Tablet PC Please observe the points listed below when travelling with your Tablet PC Before you travel gt Back up important data stored on your hard disk gt Switch off the radio component for data security reasons With data traffic via a wireless connection it is also possible for unauthorised third parties to receive data Information on activating data encryption is provided in the documentation for your radio component gt If you want to use your Tablet PC during a flight
37. e temporarily If possible they will notify you in advance If advance notice is not practical they will notify you as soon as possible You will also be advised of your right to file a complaint with the FCC Fujitsu 89 Manufacturer s notes This fax modem also complies with fax branding requirements per FCC Part 68 Your telephone company will probably ask you to disconnect this equipment from the telephone network until the problem is corrected and you are sure that the equipment is not malfunctioning This equipment may not be used on coin operated telephones provided by your telephone company Connection to party lines is subject to state tariffs Contact your state s public utility commission public service commission or corporation commission for more information This equipment includes automatic dialing capability When programming and or making test calls to emergency numbers e Remain on the line and briefly explain to the dispatcher the reason for the call Perform such activities in off peak hours such as early morning or late evening FCC rules prohibit the use of non hearing aid compatible telephones in the following locations or applications All public or semi public coin operated or credit card telephones e Elevators highways tunnels automobile subway railroad or pedestrian where a person with impaired hearing might be isolated in an emergency e Places where telephones are specifically installed to alert
38. ement This device complies with Part 15 of FCC Rules Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of this device FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy If not installed and used in accordance with the instructions it may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures 1 Reorient or relocate the receiving antenna Increase the distance between the equipment and the receiver Connect the equipment to an outlet on a circuit different from the one the receiver is connected to Consult the dealer or an experienced radio TV technician for help EWOP 92 Fujitsu Manufacturer s notes Please note the following regulatory informatio
39. emergency authorities such as fire police or medical assistance personnel Hospital rooms residential health care facilities convalescent homes and prisons Hotel motel or apartment lobbies Stores where telephones are used by patrons to order merchandise e Public transportation terminals where telephones are used to call taxis or to reserve lodging or rental cars In hotel and motel rooms as at least ten percent of the rooms must contain hearing aid compatible telephones or jacks for plug in hearing aid compatible telephones which will be provided to hearing impaired customers on request DOC Industry CANADA notices Notice to Users of Radios and Television This Class B digital apparatus meets all requirements of Canadian Interference Causing Equipment Regulations CET appareil num rique de la class B respecte toutes les exigence du R glement sur le mat rial brouilleur du Canada Notice to Users of the Canadian Telephone Network NOTICE This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications This is confirmed by the registration number The abbreviation IC before the registration number signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met It does not imply that Industry Canada approved the equipment Before connecting this equipment to a telephone line the user should ensure that
40. entally dropping or losing it gt Fasten the pen to the pen eyelet and to the eyelet on the Tablet PC 36 Fujitsu Working with the Tablet PC Tablet buttons Your Tablet PC is fitted with three tablet buttons No Description ooo ca ncrease volume button Increase the volume Reduce Volume button Reduce the volume the volume Shortcut button a the Function Manager or screen capture configuration dependent Webcam Your device has two WebCams one on the front side of the device and one on the rear The WebCam has its own status indicator The indicator lights up when the WebCam is switched on Depending on the software used you can use your Webcam to take pictures record video clips or take part in web chats e The picture quality depends the lighting conditions the software being used e You can only operate the webcam with a particular application e g an Internet telephony program or a video conferencing program which supports a webcam e When using the webcam the Tablet PC support must not wobble The webcam automatically adjusts itself to the current light level For this reason the touchscreen may flicker while the light level is adjusted Further information on using the webcam and on the additional settings which are possible for your webcam can be found in the help function of the program which uses the webcam If you would like
41. er on heat sensitive surface Do not expose the Cradle to extreme environmental conditions Protect the Cradle from dust humidity and heat Connecting the Tablet PC to the Cradle It is possible to connect the Tablet PC to the Cradle during operation To prevent IN problems we recommend that you switch the Tablet PC off first Disconnect the mains adapter from the Tablet PC before connecting the Tablet PC to the Cradle If the Tablet PC is connected to the Cradle you must connect the mains adapter to the Cradle Information when using the Cradle e When your Tablet PC is connected to the Cradle the micro USB port on the device cannot be used at the same time Use the alternative interfaces on the Cradle in this case The HDMI and VGA port on the the Cradle cannot be used at the same time if devices are connected to both VGA and HDMI port only the device on the HDMI port can be used e The supported max VGA HDMI resolution is 1920 x 1080 pixels gt Switch off the Tablet PC gt Remove the power plug of the mains adapter from the mains socket gt Pull the mains adapter cable out of the DC jack DC IN of the Tablet PC 48 Fujitsu Accessories for your Tablet PC optional gt Position the Tablet PC so that it is in line with the storage space of the Cradle gt Push the Tablet PC on to the Cradle in the direction of the arrow 1 until you notice it engage with the plug gt Plug the DC output con
42. eral Communications Commission FCC of the USA Although it is not explicitly forbidden to travel in the US trading area carrying this device to avoid trouble at customs clearance Fujitsu Technology Solutions GmbH recommends not to bring this device into the US trading area Regulatory information for Tablet PCs without radio device NOTICE Changes or modifications not expressly approved by Fujitsu Technology Solutions could void this user s authority to operate the equipment Notice to Users of Radios and Television These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver Connect the equipment into an outlet that is on a different circuit than the receiver e Consult the dealer or an experienced radio TV technician for help Notice to Users of
43. formats such as full size 1FF mini SIM 2FF or nano SIM 4FF do not fit in the SIM card slot of your Tablet PC Please do not insert any other format of SIM card as they could bend or could even damage the system Inserting the SIM card gt Open the slot cover 1 gt Gently push the SIM card into the slot 2 until you feel it click into place The label must be facing upwards Do not use any force otherwise the delicate contact surfaces could be damaged gt Replace the slot cover 42 Fujitsu Working with the Tablet PC Removing the SIM card gt Open the slot cover gt Pull the SIM card out of the slot 1 gt Replace the slot cover 2 Fujitsu 43 Working with the Tablet PC Wireless LAN Bluetooth UMTS LTE radio components The installation of radio components not approved by Fujitsu Technology Solutions A will invalidate the certifications issued for this device Switching the wireless components on and off The wireless components are switched on and off via the corresponding operating system functions gt individually switch off and on the wireless components select Settings Change PC settings Network Airplane mode Setting up WLAN access Requirement A WLAN must be available and you must have the corresponding access information Information on configuring the WLAN access can be found in the documentation for your operating system Access via UMTS LTE If
44. g installed or it is the wrong printer driver the Tablet PC to the printer is properly connected gt Check whether the correct printer driver is loaded refer to the printer documentation The radio connection to a network does not work The wireless component is disabled gt Switch the radio component on see Switching the wireless components on and off Page 44 The wireless component is enabled Despite gt Check whether the radio connection is this the wireless connection to a network does switched on via the software not work gt Further information on using the radio component can be found in the help files The battery discharges too quickly The battery is either too hot or too cold In this gt Bring the Tablet PC up down to a normal case the battery indicator flashes temperature again If the operating time of the battery life is extremely short the battery is probably too old Replace battery if necessary You may have an application running that gt Use the mains adapter as frequently as consumes a great deal of power due to frequent possible accessing of the hard disk or optical drive The maximum brightness may have been set gt Reduce the brightness of the screen to for the screen lower energy consumption You will find the setting under Control Panel Hardware and Sounds Windows Mobility Center 80 Fujitsu Troubleshooting and tips SmartCard reader is not recognised
45. ing devices to the Tablet PC or to the Cradle Keyboard Docking 1 Switch off the Tablet PC and all external devices 2 Remove the mains plug for the Tablet PC and all relevant devices from the sockets 3 Connect the cables for your external devices following the instructions 4 Plug all power cables into the mains sockets Disconnecting devices from the Tablet PC or from the Cradle Keyboard Docking 1 Switch off the Tablet PC and all external devices 2 Remove the mains plug for the Tablet PC and all relevant devices from the sockets 3 Disconnect the cables for your external devices following the instructions Fujitsu 69 Connecting external devices Connecting an external monitor HDMI port only Multi functional Cradle and Keyboard Docking The HDMI port can be used to connect an external amplifier LCD TV or a plasma TV with an HDMI connection gt Connect the data cable to the external device Connect the data cable to the HDMI port ZB HDMI P Some LCD televisions have only two loudspeaker ports and therefore cannot reproduce Dolby Digital or DTS To play back HDMI sound you must change the HDMI sound settings accordingly You can find the settings under Control Panel Hardware and Sound Deactivate the settings for DTS Audio and Dolby Digital to enable playback of HDMI sound VGA monitor port only Multi functional Cradle and Keyboard Docking An analogue monitor is connected to the anal
46. ing password protection in BIOS Setup Utility 64 Protecting BIOS Setup Utility supervisor and user password 64 Password protection for booting of the operating system 65 Password protection for the hard disk 66 SmartCard reader Optional sorei 28 AR ns A EEE a anne n e 67 Inserting the SmartCard 0 cc cece 67 Trusted Platform Module TPM device dependent 68 Enabling Mate py eee pep hee de 68 Disabling ER ten ne ne 68 Connecting external devices 4 4er 69 Connecting an external monitor 22 70 HDMI port only Multi functional Cradle and Keyboard Docking 70 VGA monitor port only Multi functional Cradle and Keyboard Docking 70 Connecting USB devices 444444uueee 71 How to remove USB devices correctly 71 Headphone port A A a ieee bh eu SE ne ent SEE 72 Settings in BIOS Setup Utility 44 73 Starting the BIOS Setup Utili
47. ional Hand strap optional e Keep the screws and d rings out of the reach of children Do not shake your arm too much when holding the device with the help of the hand strap Otherwise the device is likely to fall down When you attach the screws use the correct tool and the correct tool size gt Position the hand strap the VESA mount 1 Be sure to correctly align the holes in both VESA mount and hand strap gt Fasten the hand strap with the screws 2 Fujitsu 59 Accessories for your Tablet PC optional Shoulder strap optional When you attach the screws use the correct tool and the correct tool size A e Keep the screws and mounts out of the reach of children gt Remove the screws 1 gt Position the mounts 2 gt Fasten the mounts with the screws 3 60 Fujitsu Accessories for your Tablet PC optional Fix the shoulder strap the mounts Fujitsu 61 Security functions Security functions Your Tablet PC has several security features that you can use to secure your system from unauthorised access This chapter explains how to use each function and what the benefits are AX 62 Please remember that in some cases for example forgetting your password you may be locked out and unable to access your data Therefore please note the following information e Back up your data on external data carriers at regular intervals Some security functions
48. it is permissible to connect this equipment to the local telecommunication facilities The user should be aware that compliance with the certification standards does not prevent service degradation in some situations Repairs to telecommunication equipment should be made by a Canadian authorised maintenance facility Any repairs or alterations not expressly approved by Fujitsu or 90 Fujitsu Manufacturer s notes any equipment failures may give the telecommunication company cause to request the user to disconnect the equipment from the telephone line NOTICE The Ringer Equivalence Number REN for this terminal equipment is 0 0 The REN assigned to each terminal equipment provides an indication of the maximum number of terminals allowed to be connected to a telephone interface The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed five CAUTION A For safety users should ensure that the electrical ground of the power utility the telephone lines and the metallic water pipes are connected together Users should NOT attempt to make such connections themselves but should contact the appropriate electric inspection authority or electrician This may be particularly important in rural areas Avis Aux Utilisateurs Du R seau T l phonique Canadien AVIS Le pr sent mat riel est conforme aux sp cification
49. ith the Tablet PC Description Position two fingers on the touchscreen and move them apart to increase the view Position two fingers on the touchscreen and move them together to decrease the view With two fingers tap twice briefly in quick succession on the touchscreen 1 pen tip 2 pen button right mouse button 3 eyelet for pen cord 33 Working with the Tablet PC You can use the pen on your Tablet PC as an electronic writing implement to select items and to navigate through programs on it Programs that support handwriting recognition also allow you to write characters directly on the screen with the pen You can also use the pen as a drawing tool The Tablet PC is supplied with a pen cord which you can attach to the eyelets on the pen and on the Tablet PC AX Use only the pen provided with your Tablet PC Do not use substitutes that were not designed for your Tablet PC Replace the stylus tip if it is worn The warranty does not cover a scratched screen While writing you should take care not to scratch the surface of the display e g with a wristwatch or bracelet The Tablet PC s pen is an electronic instrument that can be damaged if used improperly Handle the pen with care The following list contains guidelines for proper pen handling Do not gesture with the pen Do not use the pen as a pointer Do not use the pen on surfaces other than the screen of the Tablet PC Do not try to
50. l Cradle optional 47 Cradle components nena RE tante vee at BE DE 47 Setting Up the Cradle e vende yeaa Sede beeline 48 Connecting the Tablet PC to the Cradle 48 Disconnecting the Tablet PC from the Cradle 50 Slice Keyboard optional eieiei E EEEE EEE REANA ee RS a een renin 51 Slice Keyboard components 51 Connecting the Tablet PC to the Slice Keyboard 52 Disconnecting the Tablet PC from the Slice Keyboard 53 Keyboard Docking optional 4422220 54 Keyboard Docking components 2 54 Connecting the Tablet PC to the Keyboard Docking 56 Disconnecting the Tablet PC from the Keyboard Docking 57 VESA mount optional Yee Pa Dee ee Ee ee 58 Hand strap lt optional OE Sa ie Sue ee GRR 59 Shoulder strap optional DR das dd bake 60 Security functions ses anne auras aerate area ra dead mn asian die 62 Configuring the fingerprint sensor 63 Configur
51. l class Brightness control Technology Digitizer and glass panel Cameras Graphics card Chip Maximum resolution on external display Width x depth x height Weight depending on configuration Input devices Tablet buttons Memory card slot SIM card slot Headphone port Docking port USB Universal Serial Bus 84 2 5 Full HD Wide View IPS 920 x 1080 pixels 16 million colours 12 levels Wide View High Bright Display with LED background lighting Dual digitizer with glare touch screen e Front HD camera Back 8 megapixel autofocus mobile light ntel c HD Graphics 4400 920 x 1200 309 6 mm x 199 3 mm x 11 9 mm depending on back cover from 954 g 3 keys Active pen with one press button x Micro SD x Micro SIM 3 5 mm stereo mini jack 1 x USB 3 0 1 x micro USB 2 0 Fujitsu Technical data Ambient conditions Environment class DIN TEC 721 Mechanism class DIN IEC 721 7M2 Operating temperature 5 C 35 C Transport temperature 2K2 15 C 60 C Rechargeable battery You can find information on the batteries used in your device on the Internet at http fujitsu com fts support 3 cell lithium polymer battery 4250 mAh Rated voltage 10 8 V Rated capacity 46 Wh Mains adapter 65 W Rated voltage 19 V Max rated current 3 16 A An additional mains adapter or power cable can be ordered at any time Multi functional Cradle optional Pos Transport
52. let PC firmly with both hands on the long side and shake it about ten times until no more water splashes out gt Turn the Tablet PC by 180 degrees and shake it again about ten times until no more water splashes out 17 Important notes Wipe every corner of the Tablet PC about ten times on a clean dry cloth to wipe out any remaining water from the recesses Wipe the Tablet PC about ten times on a clean dry cloth to wipe out any remaining water from the headphones microphone socket gt Wipe any remaining water with a clean dry cloth and leave the device to dry in the air The casing surfaces can be cleaned with a dry cloth If the Tablet PC is particularly dirty use a damp cloth soaked in water with a mild cleaning agent and well wrung out Do not clean the recesses directly with cotton buds Further information on cleaning the Tablet PC The Tablet PC does not float If the Tablet PC is exposed to water or other liquids with its connections open liquid can penetrate the Tablet PC and cause a malfunction Do not continue to use the Tablet PC Switch it off and contact our hotline service desk see enclosed list of service desks or go to our website at http support ts fujitsu com contact servicedesk gt 18 Fujitsu Important notes Cleaning with disinfectant wipes There are many ways of disinfecting surfaces The following disinfectant wipes have been tested successfully with the Tablet PC
53. m e g Installation is complete This font indicates and texts used in a software interface e g Click on Save names of programs or files e g Windows or setup exe This font indicates cross references to another section e g Safety information cross references to an external source e g a web address For more information go to http Awww fujitsu com fts Names of CDs DVDs and titles or designations for other materials e g CD DVD Drivers amp Utilities or Safety Regulations manual indicates a key on the keyboard e g F10 This font indicates terms and texts that are emphasised or highlighted e g Do not switch off the device 8 Fujitsu Ports and controls Ports and controls This chapter presents the individual hardware components of your device It gives you an overview of the device s indicators and connections Please familiarise yourself with these components before you start to work with the device Front 1 Touchscreen 6 Mechanical clip for Keyboard Docking 2 Webcam Slice Keyboard Cradle 3 Webcam LED 7 Docking connector 4 Ambient light sensor 8 Intake duct 5 Speaker Ports and controls Left side 1 DC input connector DC IN 5 Shortcut button cover protected 6 Power on indicator 2 ON OFF button 7 Battery charging indicator 3 Increase volume button 4 Reduce volume button Right si
54. me When cleaning the device please observe the relevant notes in the section Cleaning the Tablet PC Page 16 Pay attention to the additional safety notes for devices with radio components provided in the Safety Regulations manual This Tablet PC complies with the relevant safety regulations for data processing equipment If you have questions as to whether you can set up the Tablet PC the intended environment please contact your sales point or our hotline help desk Additional safety notes for devices with radio components If a radio component Wireless LAN Bluetooth UMTS LTE is integrated in your Tablet PC you must be sure to observe the following safety precautions when using your Tablet PC e Switch off the radio components when you are in an aircraft or driving in a car Switch off the radio components when you are a hospital an operating room or near a medical electronics system The transmitted radio waves can impair the operation of medical devices e Switch off the radio components when you let the device get near flammable gases or into hazardous environments e g petrol station paintshops as the transmitted radio waves can cause an explosion or a fire For information on how to switch radio components on and off see chapter Switching the wireless components on and off Page 44 12 Fujitsu Important notes Protecting the display screen Depending on the configuration your devic
55. n related to the optional radio device FCC Radio Frequency Exposure statement This radio device has been evaluated under FCC Bulletin OET 65C and found compliant with the requirements as set forth in CFR 47 Sections 2 1091 2 1093 and 15 247 b 4 addressing RF Exposure from radio frequency devices The radiated output power of this radio device is far below the FCC radio frequency exposure limits Nevertheless this device shall be used in such a manner that the potential for human contact during normal operation is minimized When using this device a certain separation distance between antenna and nearby persons must be maintained to ensure RF exposure compliance In order to comply with RF exposure limits established in the ANSI C95 1 standards the distance between the antennas and the user should not be less than 20 cm 8 inches Regulatory Notes and Statements Radio device health and authorisation for use Radio frequency electromagnetic energy is emitted from the wireless devices The energy levels of these emissions however are far much less than the electromagnetic energy emissions from wireless devices such as mobile phones Radio devices are safe for use by consumers because they operate within the guidelines found in radio frequency safety standards and recommendations The use of the radio devices may be restricted in some situations or environments such as on board an airplane e in an explosive environment or
56. ncy is increased and environmental pollution reduced By choosing the best power options you can make significant savings and at the same time help protect the environment We recommend the following settings On external power On battery power After 10 minutes After 5 minutes Turn off hard disk s After 15 minutes After 10 minutes Energy saving S3 After 20 minutes After 15 minutes Hibernate mode S4 After 1 hour After 30 minutes gt Select the power management functions in your Control Panel gt Select the Screen Saver in your Control Panel or gt Keep a finger pressed on the desktop to display the context menu Configure the screen saver under Change screen saver If you need further information about an option you can get help with most settings by pressing the symbol in the upper right of the screen to open the Microsoft Help When the Tablet PC is in power saving mode you must remember the following During power saving mode open files are held in the main memory or in a swap file on the hard disk Never switch off the Tablet PC while it is in a power saving mode If the built in battery is nearly flat close the open files and do not go into power saving mode If you do not intend to use your Tablet PC for a long period of time gt Exit the power saving mode if necessary via touching the screen by switching on the Tablet PC gt Close all opened programs and completely shut down the Tablet PC
57. nector on the mains adapter into the DC input connector DC IN on the Cradle 2 gt Connect the power cable to the mains adapter 3 gt Plug the power cable into the mains socket 4 Fujitsu 49 Accessories for your Tablet PC optional Disconnecting the Tablet PC from the Cradle It is possible to separate the Tablet PC from the Cradle during operation To prevent problems we recommend that you switch the Tablet PC off first or that you execute the appropriate undocking function provided by the operating system gt Switch off the Tablet PC gt Lift the Tablet PC from the Cradle in the direction of the arrow 1 while supporting the underneath of the Cradle 50 Fujitsu Accessories for your Tablet PC optional Slice Keyboard optional The Slice Keyboard allows text to be entered in a convenient way You need only dock the Tablet PC Slice Keyboard components 1 Release button 4 Status indicators Num Lock Caps 2 Sliding foot pulled out Lock Scroll Lock 3 Connector for the docking port of the Tablet PC Fujitsu 51 Accessories for your Tablet PC optional Connecting the Tablet PC to the Slice Keyboard gt Position the Slice Keyboard on a flat even surface To avoid toppling of the Tablet PC and resulting damage always pull out A the sliding foot when using the Slice Keyboard gt Fully pull out the sliding foot 1 Press the release button 2 until it firmly remains in p
58. need to enter the preset PIN 12345678 or the PIN given to you by your systems administrator Inserting the SmartCard Do not use force when inserting and removing the SmartCard A Make sure that foreign objects do not fall into the SmartCard reader gt Push the SmartCard into the SmartCard reader with the chip facing the rear of the Tablet PC Fujitsu 67 Security functions Trusted Platform Module TPM device dependent To use the TPM you must activate the TPM in the BIOS Setup before the software is installed The condition for this is that you have assigned at least the supervisor password see Security functions Page 62 Enabling TPM VVY gt gt Ly Requirement You have assigned a supervisor password see Security functions Page 62 Call up the BIOS Setup and select the Security menu Mark the TPM Security Chip Setting field and press the Enter key Select Enabled to activate the TPM Once you have activated the TPM the Clear Security Chip option appears Select Clear Security Chip to delete the holder in the TPM By clicking on Enabled all secret keys e g SRK Storage Root Keys AIK Attestation Identity Keys etc generated by applications are deleted Please note that you will then no longer be able to access the data you have encrypted with the keys based on that holder Select the Exit Saving Changes option in the Exit menu Press the Enter key and select Yes The Tablet PC
59. need you to choose passwords Make a note of the passwords and keep them in a safe place If you forget your passwords you will need to contact the our Service Desk Deletion or resetting of passwords is not covered by your warranty and a charge will be made for assistance Fujitsu Security functions Configuring the fingerprint sensor The fingerprint sensor can record an image of a fingerprint With additional fingerprint software this image can be processed and used instead of a password gt You must install the fingerprint software in order to be able to use the fingerprint sensor 1 Fujitsu 63 Security functions Configuring password protection in BIOS Setup Utility Before using the various options for password protection in the BIOS Setup utility A to increase data security please observe the following Make a note of the passwords and keep them in a safe place If you forget your supervisor password you will not be able to access your Tablet PC Passwords are not covered by your warranty and a charge will be made for assistance Your password can be up to eight characters long and contain letters and numbers No distinction is made between uppercase and lowercase Protecting BIOS Setup Utility supervisor and user password If you have opened these operating instructions on the screen we recommend that you print them out You cannot call the instructions onto the screen while you are setting up the pa
60. ng to the rules described below A to ensure that none of your data is lost gt Tap the symbol for safe removal of the hardware gt Select the device which you want to shut down and remove gt Tap OK 1 Wait for the dialogue box which tells you that it is now safe to remove the device Fujitsu 71 Connecting external devices Headphone port Via the headphone port you can connect either a headphone or an external speaker to your Tablet PC gt Connect the audio cable to the external device gt Connect the audio cable to the headphone port of the Tablet PC L The internal loudspeakers are disabled If you purchase a cable from a retailer please note the following information The headphone port on your Tablet PC is a 3 5 mm jack socket If you want to connect headphones or a speaker you will need a 3 5 mm jack plug 72 Fujitsu Settings in BIOS Setup Utility Settings in BIOS Setup Utility To navigate more easily in the BIOS Setup Utility you can use an external USB keyboard The BIOS Setup Utility allows you to set the system functions and the hardware configuration for the Tablet PC When it is delivered the Tablet PC is set to factory default settings You can change these settings in BIOS Setup Utility Any changes you make take effect as soon as you save and exit the BIOS Setup Utility The BIOS Setup Utility program contains the following menus About Displays information relating to the B
61. nly be operated using the pen install the driver for the standard model or If your device is one which can be operated using the pen and by finger install the driver for the Dual Digitizer model The Tablet PC does not start after switch on The battery is dead The power adapter is not connected correctly Troubleshooting gt Charge the battery or gt Connect the mains adapter to the Tablet PC Check whether the mains adapter is connected correctly to the Tablet PC Switch on the Tablet PC The Tablet PC stops working Cause Troubleshooting The Tablet PC is in energy saving mode gt Leave energy saving mode An application programme has caused the malfunction The battery is dead Fujitsu gt Close the application program or restart the Tablet PC by restarting the operating system or switching the device off and back on again gt Charge the battery or gt Connect the mains adapter to the Tablet PC 79 Troubleshooting and tips The printer does not print Troubleshooting Troubleshooting The printer is not switched on gt Make sure that the printer is switched on and ready for operation refer to the documentation supplied with the printer The printer is not connected correctly gt Check that the data cable connecting the Table PC to the printer is properly connected The printer driver is faulty or not correctly gt Check that the data cable connectin
62. not included in the delivery scope This type of cable can be obtained from a specialist dealer Whether or not your device has this function depends on the selected device expansion stage Fujitsu 45 Accessories for your Tablet PC optional Accessories for your Tablet PC optional The following accessories are available for your Tablet PC Multi functional Cradle for charging and with additional interfaces Slice Keyboard Keyboard Docking VESA mount and hand strap Shoulder strap The following sections provide more information on handling the accessories 46 Fujitsu Accessories for your Tablet PC optional Your Multi functional Cradle optional Your Multi functional Cradle is a device which in addition to quick charging can help you to quickly connect your Tablet PC to your peripheral devices such as a display screen keyboard mouse etc You need only dock the Tablet PC in order to work with your peripheral devices Cradle components 1 Connector on the Cradle for the docking 5 HDMI port of the Tablet PC 6 LAN port 2 USB port 3 0 7 DC input connector DC IN 3 USB port 3 0 4 VGA monitor port Fujitsu 47 Accessories for your Tablet PC optional Setting up the Cradle Select a suitable location for the Cradle before setting it up Follow A N the instructions below when doing so e Place the Cradle on a flat stable nonslippery surface e Never place the Cradle and the mains adapt
63. ntact with water or dust Protection class IPX5 stipulates that the tablet can be operated normally after it has been sprayed with water for at least minutes through an opening of 6 3 mm 0 25 diameter and a flow rate of 12 5 water per minute at a distance of approximately 118 11 Protection class IPX8 stipulates that your Tablet PC can be operated normally after it has been submerged in tap water for 30 minutes at room temperature and at a depth of 1 5 m 59 05 Protection class IP5X stipulates that the Tablet PC can be left in an environment with dust particles of up to 75 diameter for 8 hours and can then still be operated safely A Fujitsu To ensure that the device remains watertight and dust protected the interface and DC IN covers must always remain sealed Chapters SIM card Page 42 and Memory cards Page 40 describe how ports can be opened and securely sealed again Otherwise water could penetrate the Tablet PC and cause a malfunction Ensure that water in the headphones and microphone area is wiped away immediately or else a malfunction or electric shock could occur If the Tablet PC comes into contact with salt water soft drinks or sludge it must be cleaned immediately Important notes Cleaning the Tablet PC A 16 Always switch your Tablet PC off for cleaning Depending on the selected rear cover option of your device your Tablet PC is watertight and dust protected If in doubt
64. of Fujitsu and is provided for comparison purposes Several factors may cause the actual results to differ Technical data is subject to change without prior notification Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions Trademarks Fujitsu the Fujitsu logo and STYLISTIC are registered trademarks of Fujitsu Limited or its subsidiaries in the United States of America and other countries Microsoft and Windows are trademarks or registered trademarks of the Microsoft Corporation in the United States and or other countries Adobe Reader is a trademark of Adobe Systems Incorporated Sony and Memory Stick are registered trademarks of Sony Electronics Inc Boost Made under license from DTS Licensing Limited DTS and the symbol are registered trademarks and amp DTS Boost is a trademark of DTS Inc Product contains software DTS Inc All rights reserved All other trademarks specified here are the property of their respective owners Copyright No part of this publication may be copied reproduced or translated without the prior written consent of Fujitsu No part of this publication may be saved or transferred by any electronic means without the written approval of Fujitsu Contents Contents Innovative technology 4444 esse 7 Eurth r information nana anus AES We Sh near 7 Notational conventions 4444244084 cen dpt ne
65. ogue VGA monitor port The display output is limited to a maximum of two screens at the same time Switch off the Tablet PC and the external monitor gt Plug the data cable of the external monitor into the monitor port First switch on external monitor and then the Tablet PC You can also switch back and forth between the external monitor and the LCD screen of the Tablet PC see Touchscreen Page 27 You can display the same picture on the external monitor and the LCD screen of the Tablet PC simultaneously 70 Fujitsu Connecting external devices Connecting USB devices On the USB ports you can connect external devices that also have a USB port e g a DVD drive a printer a scanner or a modem USB devices are hot pluggable This means you can connect and disconnect devices while your operating system is running USB 1 x has a maximum data transfer rate of 12 Mbit s USB 2 0 has a data transfer rate of up to 480 Mbit s USB 3 0 has a data transfer rate of up to 5 Gbit s Additional information can be found in the documentation for the USB devices gt Connect the data cable to the external device gt Connect the data cable to a USB port Tablet PC Keyboard Docking or Cradle or micro USB port Tablet PC only Device drivers USB devices will be automatically recognised and installed by your operating system How to remove USB devices correctly Always correctly remove the device accordi
66. ottom edge t Fujitsu gt Open the Charms with system commands equivalent to pressing the Windows button button Working with the mouse Position the mouse pointer at the bottom right hand edge of the screen Switch between the most recently used applications equivalent to pressing the Windows button Space Working with the mouse Position the mouse pointer at the bottom left hand edge of the screen Open the App commands equivalent to pressing the Windows button Z button Wipe from the top to the bottom of the screen to dock or close the current App Working with the mouse Right click on the App to display the App commands 29 Working with the Tablet PC Press and hold _ Tap on an object Scroll Move object Swivel object 1 L 30 gt gt Keep your finger pressed on an object on the screen to display a menu with further options Working with the mouse Move the mouse pointer over the object to display a menu with further options Tap your finger on an object on the screen to open an App or a link or to execute a command Working with the mouse Left click on the object Use this function to scroll through lists or websites or to swivel or move an object Working with the mouse Left click the object keep the mouse button pressed and move swivel the object or scroll F
67. print sensor 63 configure 63 First time setup 20 G Getting started 20 GPS 45 H Hardware configuration 73 HDMI port 70 1 Important notes 12 Incorrect date time 77 L Landscape orientation screen 28 Life battery 38 Low voltage directive 88 M Mains adapter connecting 21 setting up 21 Memory card handling 40 inserting 40 removing 41 Mobile operation 14 Monitor connecting 70 drifting display 78 remains blank 78 Monitor port see VGA connection socket 70 Fujitsu N Notes 12 CE marking 88 cleaning 16 disposal recycling 88 energy saving 13 Safety 12 touchscreen 27 transport 14 Operating system activating system protection 65 cancel system protection 65 protecting with password 65 P Packaging 20 Password changing 65 entering 64 removing 65 Password protection 64 Password protection hard disk 66 Peripheral devices connecting 69 disconnecting 69 Portrait orientation screen 28 Ports 47 Power power consumption 39 power management features 39 Power on indicator 25 Preparing for operation 21 Printer does not print 80 R Radio component safety notes 12 Rechargeable battery 38 see Battery 38 Regulatory information Tablet PCs with radio device 92 Tablet PCs without radio device 89 S Safety notes 12 Screen no screen display 78 Fujitsu Index Screen port see VGA connection socket 70 Security functions 62 SystemLock 67 Security functions SmartCard 67 Selecting
68. ressed position red marking visible gt Push the Tablet PC on to the Slice Keyboard in the direction of the arrow until you feel it engage on the connector 3 Y 52 Fujitsu Accessories for your Tablet PC optional Disconnecting the Tablet PC from the Slice Keyboard gt Press and hold the release button on the Slice Keyboard 1 gt Lift the Tablet PC from the Slice Keyboard in the direction of the arrow 2 Fujitsu 53 Accessories for your Tablet PC optional Keyboard Docking optional The Keyboard Docking allows text to be entered in a convenient way and to connect external devices You need only dock the Tablet PC Keyboard Docking components 1 Release button LAN port 2 Connector for the docking port of HDMI the Tablet PC USB port 3 0 3 Status indicators Num Lock Caps Lock Scroll Lock 4 VGA monitor port 5 USB port 3 0 I Battery level indicator 0 Battery charging indicator gt ON I 54 Fujitsu Accessories for your Tablet PC optional Status indicators Status indicator Battery level indicator The battery indicator shows the state of charge of the battery The indicator lights up white The battery is charged between 50 and 100 The indicator lights up orange The battery is charged between 13 and 49 The indicator lights up red The battery is charged between 0 and 12 Battery charging indicator The
69. rrectly after gt Please contact your sales outlet or our switching on the Tablet PC Hotline Service Desk Battery indicator does not illuminate The battery is fully discharged gt Charge the battery or gt Connect the Tablet PC to a mains outlet using the mains adapter The Tablet PC s touchscreen remains dark Cause Troubleshooting o a a aaoo is switched off gt key external keyboard tap on the touchscreen External monitor or television set connected gt Check whether the graphics driver settings are correct or whether an external monitor has been detected in Intel Graphics Media Accelerator Driver for mobile The display on the Tablet PC s touchscreen is difficult to read Troubleshooting Reflected glare gt Move the Tablet PC into a different position gt Increase the brightness of the screen Fujitsu 77 Troubleshooting and tips The external monitor remains blank Troubleshooting Monitor is switched off gt Switch the external monitor on Power saving has been activated monitor is gt Press a key external keyboard or tap on blank the touchscreen Brightness is set to dark gt Adjust the brightness of the monitor Screen output is set on the Tablet PC s gt Check whether the graphics driver settings touchscreen are correct or whether an external monitor has been detected in Intel Graphics Media Accelerator Driver for mobile The ex
70. s before you switch off your VAN device Otherwise data might be lost gt Shut down the operating system correctly gt Ifthe notebook is not switched off automatically press the ON OFF switch for approx five seconds Handwriting recognition For detailed information on handwriting recognition see the documentation on your operating system At present handwriting recognition under Windows 7 supports the following languages English German French Italian Japanese Korean Chinese traditional and simplified Dutch Portuguese Spanish Brazilian Norwegian Bokmal and Nynorsk Swedish Finnish Danish Polish Rumanian Serbian Cyrillic and Latin script Catalan Russian Czech and Croatian Under Windows 8 1 you can set the required language under Control Panel Time Language and Region Language 26 Fujitsu Working with the Tablet PC Touchscreen High quality TFT displays are installed in Tablet PCs from Fujitsu Technology Solutions GmbH For technical reasons TFT monitors are manufactured for a specific resolution An optimal clear picture can only be ensured with the correct resolution intended for the relevant TFT monitor A monitor resolution which differs from the specification can result in an unclear picture The screen resolution of your Tablet PC s touchscreen is optimally set at the factory The standard of production techniques today cannot guarantee an absolutely fault free screen display A few i
71. s techniques d Industrie Canada applicables au mat riel terminal Cette conformit est confirm e par le num ro d enregistrement Le sigle IC plac devant le num ro d enregistrement signifie que l enregistrement s est effectu conform ment une d claration de conformit et indique que les sp cifications techniques d Industrie Canada ont t respect es Il n implique pas qu Industrie Canada a approuv le mat riel Avant de connecter cet quipement une ligne t l phonique l utilisateur doit v rifier s il est permis de connecter cet quipement aux installations de t l communications locales L utilisateur est averti que m me la conformit aux normes de certification ne peut dans certains cas emp cher la d gradation du service Les r parations de l quipement de t l communications doivent tre effectu es par un service de maintenance agr au Canada Toute r paration ou modification qui n est pas express ment approuv e par Fujitsu ou toute d faillance de l quipement peut entra ner la compagnie de t l communications exiger que l utilisateur d connecte l quipement de la ligne t l phonique AVIS L indice d quivalence de la sonnerie IES du pr sent mat riel est de 0 0 LIES assign chaque dispositif terminal indique le nombre maximal de terminaux qui peuvent tre raccord s une interface t l phonique La terminaison d une interface peut consister en une combinaison quelconque
72. solated constant lit or unlit pixels picture elements may be present The maximum permitted number of pixels faults is stipulated the international standard ISO 9241 3 Class II Example A monitor with a resolution of 1280 x 800 has 1280 x 800 1024000 pixels Each pixel consists of three subpixels red green and blue so there are almost 3 million subpixels in total According to ISO 9241 3 class 11 a maximum of 2 light and 2 dark pixels and an additional 5 light or 10 dark subpixels or a corresponding mix may be defective 1 light subpixel counts as 2 dark subpixels Pixel A pixel consists of 3 subpixels normally red green and blue A pixel is the smallest element that can be generated by complete functionality of the display Subpixel A subpixel is a separately addressable internal structure within a pixel that enhances the pixel function Cluster A cluster contains two or more defective pixels or subpixels in a 5 x 5 pixel block Background lighting TFT monitors are operated with background lighting The luminosity of the background lighting can decrease while the Tablet PC is in use However you can set the brightness of your monitor individually Ambient light sensor If your notebook was shipped with the Windows operating system the screen brightness is regulated by means of the ambient light sensor and depending on the respective light conditions This results in optimum readability and longer battery life at the
73. ssword The supervisor password and the user password both prevent unauthorised use of the BIOS Setup Utility With the aid of the supervisor password you can access all of the functions of the BIOS Setup Utility while the user password will only give you access to some of the functions You can only set up a user password if a supervisor password has already been assigned Please refer to section Settings in BIOS Setup Utility Page 73 for a description of how to call up and operate the B OS Setup Utility Setting supervisor and user password Start the BIOS Setup Utility and go to the Security menu Select the Set Supervisor Password field and press the Enter key With Enter new Password you are asked to enter a password Enter the password and press the Enter key Confirm new Password requires you to confirm the password Enter the password again and press the Enter key Changes have been saved is a confirmation that the new password has been saved To set the user password select Set User Password and proceed exactly as when configuring the supervisor password If you do not want to change any other settings you can exit BIOS Setup Utility In the Exit menu select the option Save Changes amp Exit Select Yes and press the Enter key The Tablet PC is rebooted and the new password is effective It will now be necessary to first enter your supervisor or user password in order to open the BIOS Setup Utility Please
74. t window Opening a context Click with the right hand mouse Place the pen directly on the required button element and hold the pen pressed against the screen Moving the cursor Place the pen tip directly on the screen Pen position On delivery the pen is positioned in the pen slot 1 Setting the pen Operating system Menu Windows 7 Under Hardware and Sound Pen and Input Devices in the Control Panel you can make various settings for the pen assignment and function of the pen button Windows 8 1 Under Windows 8 1 Desktop Control Panel Hardware and Sound Pen and Input Devices you can make various settings for the pen assignment and function of the pen button Fujitsu 35 Working with the Tablet PC Calibrating the pen If Windows 8 1 is installed on your Tablet PC your Tablet PC is already calibrated at initial setup If a different operating system is installed on your Tablet PC you must calibrate it with the pen before first use so that it recognises the pen as accurately as possible You should also always repeat the calibration if the co ordination between the pen and cursor movement deteriorates Operating system Windows 7 To calibrate call up the Hardware and Sound Tablet PC Settings function Windows 8 1 Desktop in the Control Panel You need to calibrate both portrait and landscape formats Installing a pen cord You should attach the pen with a pen cord to prevent accid
75. temperature 15 C 60 C Fujitsu 85 Technical data Slice Keyboard optional Electrical data Safety regulations complied with Protection class Ambient conditions Environment class DIN IEC 721 7K1 Mechanism class DIN IEC 721 7M2 Operating temperature 5 C 35 C 15 C 60 C Ambient conditions Environment class DIN IEC 721 Mechanism class DIN IEC 721 Operating temperature 5 C 35 C Transport temperature 15 C 60 C VESA mount optional Dimensions Width x depth x height approx 218 mm x 103 5 mm x 13 5 mm Weight approx 120 g 86 Fujitsu Technical data Hand strap optional Width x depth x height approx 480 mm x 77 mm x 13 mm Weight approx 30 g Shoulder strap optional Length x depth x height approx 1270 mm x 25 mm x 5 mm Weight approx 25 g Fujitsu 87 Manufacturer s notes Manufacturer s notes Disposal and recycling You can find information on this subject on your Tablet PC or on our website http Avww fujitsu com fts about fts environment care Declarations of Conformity The Declarations of Conformity for the device can be found on the Internet at http globalsp ts fujitsu com sites certificates default aspx Fujitsu Technology Solutions hereby declares that your device is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC CE marking The shipped
76. ternal monitor s power cable or data Switch off the Tablet PC and the external cable is not connected properly monitor Check whether the power cable is plugged properly into the external monitor and into the power socket Check whether the data cable is properly connected to the Tablet PC and the external monitor if it is plugged in with a connector Switch on the Tablet PC and the external monitor The external monitor is blank or the image is unstable Caused Troubleshooting The wrong external monitor has been selected Terminate the application program in or the wrong screen resolution has been set for Windows If the error persists after the application program terminating the program use the key combination for switching the screen output in order to switch to the touchscreen of the Tablet PC Change the following setting Set the screen resolution Set the screen resolution as described in the documentation for your operating system Select monitor Select monitor 1 or 2 as described in the documentation for your operating system The cursor does not correctly follow the pen movements Cause Fault elimination Pen incorrectly calibrated gt Calibrate the pen as described in chapters Setting the pen Page 35 and Calibrating the pen Page 36 78 Fujitsu Pen input not working Incorrect driver installed Troubleshooting and tips Troubleshooting gt If your device is one which can o
77. to perform a function test of your webcam suitable test software is available at http www fujitsu com fts support index htm Fujitsu 37 Working with the Tablet PC Rechargeable battery For mobile use the built in battery provides the Tablet PC with the necessary power You can increase the life of the battery by caring for the battery properly The average battery life is around 500 charge discharge cycles You can extend the battery life by taking advantage of the available energy saving functions Charging and maintaining the battery The Tablet PC battery can only be charged when the ambient temperature is between 5 C 41 F and max 35 C 95 F You can charge the battery by connecting the Tablet PC to the mains adapter see Mains adapter connecting Page 21 If the battery is running low you will hear a warning alarm If you do not connect the mains adapter within five minutes of the warning alarm described above your Tablet PC will switch off automatically Monitoring the battery charging level In the system bar status display there is a battery symbol shown for monitoring the battery capacity The battery symbol shows you the battery charge 38 Fujitsu Working with the Tablet PC Using the power management features The Tablet PC uses less power when the power management features are enabled You will then be able to work longer when using the battery before having to recharge it Power efficie
78. ty 2 ee 73 Operating BIOS Setup Utility 4 444 e etn e eee een e pene reneeeenes 74 Exiting BIOS Setup Utility pcn rn ce aaa pe ete at FFG NE SANA ee eee 75 Exit Saving Changes save changes and exit BIOS Setup Utility 75 4 Fujitsu Contents Exit Discarding Changes Discard changes and exit BIOS Setup Utility 75 Load Setup Defaults Copy Standard Entries 75 Discard Changes Discard changes without exiting the BIOS Setup Utility 75 Save Changes save changes without exiting the BIOS Setup Utility 75 Save Changes and Power Off 000 ccc een eens 75 Troubleshooting and tips 4 444 issues 76 Help if problems occur Ra detre ne Ne 76 The Tablet PC s date or time is incorrect 77 Battery indicator does not illuminate 222 77 The Tablet PC s touchscreen remains dark 77 The display on the Tablet PC s touchscreen is difficult to read 77 The external monitor remains blank 78 The external monitor is blank or the image is unstable 78 The cursor
79. ujitsu Working with the Tablet PC Actions with one finger Windows 7 Windows 8 1 Desktop Selecting objects click with the left mouse button Starting programs double click with the left mouse button Moving objects windows drag with left mouse button pressed Drag amp Drop Opening a context menu click with the right mouse button Moving the cursor Fujitsu With your finger tap once briefly on the object gt With your finger tap twice briefly in quick succssion on the program icon lt gt Place a finger directly on the object window hold the finger pressed against the touchscreen and move the desired object window Touch the desired item once with your finger tip Keep the finger tip pressed against the touchscreen The context menu appears gt Position one finger the touchscreen and move the finger in the desired direction 31 Working with the Tablet PC Actions with two fingers Windows 7 Windows 8 1 Desktop Action Description Scrolling Position two fingers on the touchscreen Move your fingers upwards to scroll up Move your fingers downwards to scroll down Rotating Position the thumb on the touchscreen then turn the picture clockwise or counter clockwise using your index finger 32 Fujitsu Action Increasing or decreasing the view Blocking context sensitive menus Using the stylus pen 2 3 Fujitsu Working w
80. unctions which can be used to control your Tablet PC s hardware and protect your system better against unauthorised use Information on the connections and controls for your Tablet PC can be found in chapter Ports and controls Page 9 Further information The Windows drivers for your device can be found on our Internet site The factory installation of your device does not support any other operating system Fujitsu Technology Solutions accepts no liability whatsoever if any other operating system is used Software oriented components of these instructions refer to Microsoft products if they come within the scope of the delivery If you install other software products pay attention to the operating instructions of the manufacturer Fujitsu 7 Innovative technology Notational conventions Pay particular attention to text marked with this symbol Failure to observe A these warnings could pose a risk to health damage the device or lead to loss of data The warranty will be invalidated if the device becomes defective through failure to observe these warnings LE Indicates important information for the proper use of the device Indicates an activity that must be performed This font indicates data entered using the keyboard in a program dialogue or at the command line e g your password Name123 or a command used to start a program start exe This font indicates information that is displayed on the screen by a progra
81. version of this device complies with the requirements of European Union directives 2004 108 EC Electromagnetic compatibility 2006 95 EC Low voltage directive and 2009 125 EC Ecodesign CE marking for devices with radio component This equipment complies with the requirements of Directive 1999 5 EC of the European Parliament and Commission from 9 March 1999 governing Radio and Telecommunications Equipment and mutual recognition of conformity CE nnnn numeric number and alert mark see label on product You can find more information and declarations of conformity on the Internet at http globalsp ts fujitsu com sites certificates This equipment can be used in the following countries Belgium Bulgaria Denmark Germany Estonia Finland France Greece UK Ireland Iceland Italy Latvia Liechtenstein Lithuania Luxembourg Malta Netherlands Norway Austria Poland Portugal Rumania Sweden Switzerland Slovakia Slovenia Spain Czech Republic Hungary Cyprus Croatia Contact the corresponding government office in the respective country for current information on possible operating restrictions If your country is not included in the list then please contact the corresponding supervisory authority as to whether the use of this product is permitted in your country 88 Fujitsu Manufacturer s notes Regulatory notices If there is no FCC logo and also no FCC ID on the device then this device is not approved by the Fed
82. xit menu Select the entry Load Setup Defaults Select OK and press the Enter key Contact your sales outlet or our customer service centre Start the BIOS Setup Primary Master submenu and select the correct settings Switch off your Tablet PC with the ON OFF switch Wait 3 5 seconds and switch on the Tablet PC again If you are using an external keyboard gt Check the connection and reboot the Tablet PC gt Make sure that no key is pressed gt Check the BIOS Setup whether your hard disk has been set correctly gt Make sure that the operating system is installed on the corresponding drive gt Press the Alt key the Tablet PC to boot the operating system gt Contact your sales outlet or our customer service centre gt Contact your sales outlet or our customer service centre gt Contact your sales outlet or our customer service centre gt Contact your sales outlet or our customer service centre gt Contact your sales outlet or our customer service centre 83 Technical data Technical data Tablet PC Processor Main memory SO DIMM Electrical data Safety regulations complied with Protection class Core i5 or Core i7 depending on configuration Core i5 4 GB Core i7 8 GB Maximum power consumption when the Tablet 65 W PC is switched on connected to the attachable keyboard and the battery is charged Touchscreen Size Resolution Pixe
83. you ordered an integrated UMTS LTE module with your system you can enjoy optimum reception and maximum energy efficiency without awkward cables or antennas The optional UMTS LTE module is ready for use straight away If you did not order a UMTS LTE module you can purchase the accessories for UMTS LTE reception from your retailer or your Fujitsu Technology Solutions dealer You will find information on establishing the connection with the UMTS LTE network in the documentation for the hardware used Your device can connect to the Internet via UMTS LTE To do this use one of the following types of connection Integrated UMTS LTE module availability dependent on your model variant USB dongle a USB stick with your mobile phone provider s SIM card mobile end device e g mobile phone with Bluetooth or cable connection 44 Fujitsu Working with the Tablet PC Ethernet and LAN only with Multi functional Cradle or Keyboard Docking The internal network module of your Tablet PC supports Ethernet LAN You can use it to establish a connection to a local network LAN Local Area Network gt Connect the network cable to the LAN port of the Cradle 1 55 or gt Connect the network cable to the LAN port of the Keyboard Doking 1 gt Connect the network cable to your network connection 2 Your network administrator can help you to configure and use the LAN connections The network cable is

Ports and controls

Contents

Download Pdf Manuals

Related Search

Related Contents