Operating Instructions
Contents
1. O EXT _L DOWN Not available in this system pt STORE I UP FRESELECTION Audio gt Studia Line In gt MP3 internal gt MP3 external 1 EXT dT DOWN Determines the start setting of the audio source Factory setting MP3 internal 1 STORE L UP PRESELECTIOH 2 megaVoice gt on gt off 1 EXT DOWN D Specifies the start setting of the voice guidance system Factory setting on Operating Instructions space 3000 pureCollagen 23 Od Fon 7 EXT JL DOWN OFF Aircon Aircondition O EXIT IT DOWN Not available in this system Activates and deactivates the voice guidance system megaVoice Factory setting on PRESELECTION Aroma gt English gt German PT EXT J DOWN I 7 EXT DOWN San Fixes the language setting ofthe megaVoice system Not available in this system The following languages are fully supported GB RU DE FR IT PL CZ NL HU BG HR RO RS SK The following languages are supported in part DK EE LT NO ES SE TR without easyCare 15 ee ee ee Factory setting Depending on the operator country Aqua aquaCoal AUDIO LERE P A EXT I DOWN Studio Line In Not available in this system TA s off L D EXT 7 DOWN Activates and deactivates the Studio line in audio signal Factory setting on eN L STORE UP BE AUDIO al 22 ww pie 20 Mp3 internal gt 3 oe PT ext DOWN CU D EXT JL DOWN Activates and de2. Bono aes 1 EXT DOWN Presetting the maximum adjustable sound level limits the maximum adjustable sound level in the operating and standby mode Factory setting 9 gt 89 09 dB 1 EXT DOWN Here you can adapt the volume of megaVoice Factory setting 00 dB Operating Instructions space 3000 pureCollagen 25 26 SKBL AUDIO 5 Dynamic volume adaptio gt on o T E DOWN gt off Dynamic volume adaption on off Factory setting on GD 14 14 dB C E EXT 7 DOWN Sets the treble for MP3 USB operation Factory setting 00 dB G gt 14 L STORE L up AUDIO High bass MP3 USE 17 22 14 dE PT EXT JL DOWN Sets the high bass for MP3 USB operation Factory setting 00 dB 63 gt 14 AUDIO Low bass MP3 USB 14 dE C A EXT TJ DOWN Sets the low bass for MP3 USB operation Factory setting 07 dB 2 29 1 pt STORE L UP AUDIO 19722 Volume adaption Studio Line In 29 dB I 7 EXT DOWN Here you can adapt the volume of studio line in sig nal Factory setting 00 dB Operating Instructions space 3000 pureCollagen PX 7 DOWN Sets the treble for studio music operation Factory setting 00 dB gt 19 14 dB High bass Studio Line in EXT 1 DOWN Sets the high bass for studio music operation Factory setting 00 dB STORE up AUDIO Pz Low bass Studio Line
3. P RE OLLAGEN Operating Instructions Copyright 2013 KBL AG This documentation only covers products manufactured by KBL AG It must not be duplicated photocopied translated or stored without prior specific permission by KBL AG Duplication on electronic media or in machine readable form either in whole or in part is also prohibited DISCLAIMER All information given in this document correspond to the status quo at the date of publication but may be subject to changes Therefore we do not accept any liability for nor do we guarantee the accuracy and or completeness of the information Technical equipment and versions of the devices are in accordance with the legal prescriptions of the respective country of destination Export to the USA and Canada of the KBL products listed in this guide or operation of the systems in these countries are not permitted KBL does not accept any manufacturers liability in case this direction is not adhered to It is expressly pointed out that any violation of the export operation prohibition will involve substantial risks of liability for the exporter and or operator Version BA_monamie_tower_GB_B Date 06 2013 Control Software version KBL 7 01 13 Item no 0100036452 For instruction updates please refer to http www kbl support de KBL AG Ringstrasse 24 26 56307 Dernbach Germany Telephone 49 0 2689 9426 0 Fax 49 0 2689 9426 66 Email info kbl de www kbl de 4
4. gt KBL General information 5 Maintenance and cleaning cccsssesesseees 32 About these instructions 5 Instructions for cleaning and care 32 Transport by forklift truck 5 Maintenance intervals 32 Other modes of transport 5 Cleaning and replacing the acrylic panes 33 Old equipment disposal 5 Cleaning and replacing the tubes 34 DS LE A ATOS ee denken 5 Replacing the unit lighting 35 es Recording to an SD card 36 Safety notes 6 EE Intended use 6 System messages sms 37 Duties of the Operator uussnnnnnnnnnnnnnnnnnnnnen 6 Timer operation una 6 Technical Data cccccceccccccccocsocsecsessecsessssescesceesseseeeee 39 General safety advice 7 VIEWSC cccsvanes heads coca Shacisiee ern sateastanssensasdactacsehcasticens 40 Updating the system software 7 Description of the unit 8 Standards 8 VIEWS sn aaa aa aE ERAUS TEUS SEER 8 Connections 9 Overview supply connections 9 Connecting the mains voltage 9 Connecting an external timer 9 Connecting an external audio source 10 Operation using different audio sources 10 Connecting the channel selection 10 Level adjustment
5. The functions must be available and activated in the service menu Selectable function symbols for a fully equipped unit a ip megaVoice Studio MP3 ext Operating Instructions space 3000 pureCollagen 15 16 SKBL Functions overview Volume MP3 internal This function is used to play the tracks of the internal MP3 player of the unit the re spective first title being selected by a ran dom generator If the MP3 internal function has been activated press the plus and mi nus buttons to browse through the individ Body fan The body fan is automatically controlled by ACS As soon as you press one of the fan but tons the automatic mode is in terrupted Keep pressed ual tracks L MP3 HER INT Im N STUDIO for 2 seconds EN e us Med ay gt se megaVoice Channel F Studio This function is used to play the studio music If the Studio function has been activated you can press the plus and minus buttons to browse through the channels provided that more than one channel is available Tracks MP3 external AUX A line connection has been integrated into in the head area near the interior display so that the user can connect his or her own player such as MP3 players iPods etc Use a standard 3 5 mm jack cable to connect the jack plug to the earphone jack of your player Use the corresponding operating elements of the external player in order to select th
6. gt AARAA ARAZA 1 EXIT OT DOWN Sets the contrast of the display Factory setting 00020 STORE ENVIRONMENT TIME AND DATE gt press ENTER 1 EXT I DOWN Entry of date and time Invoke the submenu by pressing START ENTER SUBMENU TIME amp DATE STORE L UP EHUIRONMENTSTIME amp DATE 81 82 Time gt 88 88 23 59 I 1 EXIT 1 DOWN Set value Store Exit Select time or date Select input fields start set L STORE L UP ENVIRONMENTSTIME amp DATE 82 82 Dake 215 838 88 Tu 1 EXT 7 DOWN Operating Instructions space 3000 pureCollagen 21 SKBL The menu item Timer decorative lighting offers you two switching cycles A and B for each day of the week NOTE SWITCHING CYCLES Using the setting monday sunday the switching cycle will be the same for each day of the week VVeek Switching cycle B Monday B ON Sunday Switching cycles B Monday Tuesday Wednesday Thursday Friday Saturday Sunday Switching cycle B 08 30 12 00 14 30 22 00 22 Operating Instructions space 3000 pureCollagen ENVIRONMENT d Entering switching times for the decorative lighting The submenu is invoked by pressing START ENTER SUBMENU TIMER DECORATIV LIGTHING SELECT DAY OF THE WEEK STORE BERN ENUIRONMENTSTIMER Ib 81 88 gt gt Monday Sunday SEC ENTER SWITCHING TIME
7. In the service mode the device is configured for the operating mode Various values can be displayed and test functions can be carried out FAN RUN ON After the session the fan runs on for 3 minutes in order to cool down the device The fan power is automatically decreased as the tubes cool down Operating Instructions space 3000 pureCollagen SKBL Your Tower space 3000 11 1 is a skin care system for the targeted build up of collagen Instructions for the user e Use should be pleasant If use is unpleasant dis continue and consult the operating personnel and possibly a physician FOR EACH SESSION e Always wear the supplied protective goggles Con tact lenses or sunglasses are no substitute for the protective goggles The desired effect of skin vitalization can only be achieved with fluorescent tubes that are maintained and replaced in accordance with the intervals listed in the Maintenance chapter No UV radiation is released during a collagen treat ment with the Tower space 3000 PURE CLLAGEN The individual desires of the customer with regard to treatment duration can thus be given greater priority KBL recommends a treatment duration of 10 min utes per session In addition KBL recommends two treatments per week Operating Instructions space 3000 pureCollagen 13 SKBL The following explanations and functions refer to a tanning system that is fully equipped with all features Starting a ses
8. STORE L UN ENUIROHMENTS TIMER NT 81 84 gt Day AOH gt Day AOFF gt Day BON gt Day BOFF Ld EXT 1 DO N SET SWITCHING CYCLES I 1 STORE L UP EHUISSSRIENTSTIMER 1 84 Monday Al gt ARRA 23 59 Po TL EXT 7 DOWN S Eu us Val Set the time gt Select input Save settings by fields pressing STORE start set L STORE Up ENUIR HMENT 5 85 Maximum kanning time gt Emin 45min 1 EXT JL DOWN Sets the maximum tanning time for all timers In the easyCare operating mode the setting has been fixed to 30 minutes Factory setting 44 minutes 6 HOUR METERS Operating hours overall 7 HOUR METER Operating hours UW tubes gt 8183h EXIT DOWN Q 2 sec reset Not available in this system HOUR METERS collagen tub Operating hours gt 8156h 2 sec reset Displays the total operating hours of the collagen tubes and includes a reset function and set function to set the value in steps of five via the buttons Save settings by pressing STORE STORE UP HOUR METER P EXT DOWN Sr 2 sec reset Indicates the number of tanning sessions sunbaths and includes a reset function Under the menu item PRESELECTION you can make the initial settings for the de vice The functions must be available and activated in this service menu 6 47 09 68 44 60 SORE L UP PRESELECTION 31706
9. in EXT L DOWN Sets the low bass for studio music operation Factory setting 07 dB aqua Cool PT EXIT DOWN Not available in this system aqua Cools pray time C EXT L DOWN Not available in this system O 19 PT EXT 7 DOM PT EXT T DOWN Not available in this system Not available in this system DL I ot EXT T DOWN IT EXT DOWN Jy 2 sec reset Not available in this system Not available in this system e amp aqual 7 Ext JT DOWN EXIT IT DOWN Not available in this system 5 A Not available in this system 3 roma cabin automatic L d EXT DOWN Not available in this system CL DOWN Not available in this system Operating Instructions space 3000 pureCollagen AROMA PT EXT L DOWN Not available in this system Not available in this system 28 Operating Instructions space 3000 pureCollagen I 1 Ext DOWN Not available in this system AIR COHLITIONING Aircon air conditioning 1 EXT I DOWN Not available in this system AIR CONDITIOHING He Stark level body fan les Ext 7 DOWN Specifies the start speed setting of the body fan at the beginning of the tanning Factory setting 2 PT EXT JL DOWN Only for devices with LED technology fourSeasons setting options from 0 to 9 0 off 1 8 Permanent colour selection 9 Rotation automatic ch
10. of the tower Operating Instructions space 3000 pureCollagen Please refer to the chapter Technical data for information regarding supported card sizes as well as file system and MP3 formats The card contains two directories Pop and Voice Within the Pop directory you can add or delete audio files as you desire These audio tracks are played if the corresponding source has been selected The number of files is limited by the storage capacity of the SD card The SD card must not be formatted the Voice directory and its contents must not be changed or deleted RECORDING TO THE SD CARD Attention S Do not modify any files included in the VOICE directory Insert the card into the computer and wait for it to be recognised e Copy files to the Pop directory or delete files from it SKBL ERROR MESSAGES After the error has been eliminated all error messages must be acknowledged by pressing START on the interior display No 01 02 03 12 13 14 15 17 18 19 20 21 22 23 24 25 26 Status message Excess temperature bimetal Maximum tanning time Excess temperature exhaust fan KBL7 Hardware error Input Controller Maximum write cycle flash memory reached Error SD card read error CRC fault Error no access to the SD card Parameter storage not found please connect and restart Parameter storage no valid serial number CAN BUS Interior displa
11. studio music 11 External Players 11 Start UP na 12 Operating modes 12 USAQe ANEHENEB ER EUE A T 13 Instructions for the user uuuuuuu444nnn nennen 13 Operating mode uunuuurunnunnnnnnnnnnnnnnnnnnnnnnnnnnn 14 Starting a session 14 Operation during the session 14 Variable section of the control pane 15 Basic functions 15 FUNCTIONS overview nnnenennnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn 16 Standby mode service mode 2222224uunun20n0nnn 17 Layout of the display numbers 17 Switching the decorative lighting on and off 17 Invoking the service menu 17 Service menu Basics ccccesssseeeessssteeeeeesseeees 18 Service menu Overview eceeeeeeeeteeeeeeeeeeeeeeees 20 Personal PIN reset 21 Service menu OPTIONS 21 Operating Instructions space 3000 pureCollagen SKBL About these instructions This operating manual is intended for use by e operating staff e users e service staff Any person dealing with this tanning unit must have read and understood these instructions This manual describes units equipped with the maximum number of features Keep this manual ready to hand at all times Transport by forklift truck The device is mounted on a pallet e Insert the forks carefully into the openings of the pallet e Lift the load by a few centimetres e Transport the load car
12. ER DOOR OPENED Facing of unit lighting at top crown Door handle inside Supply connections FRONT AND TOP PART OF THE TOWER DOOR CLOSED 14 111117 11111111 11 E 9 Lateral part lefthand side _ 6 8 Operating Instructions space 3000 pureCollagen SKBL Overview supply connections Q 3 hy 1 1S 2 1 Audio connection channel selection 2 Connection of external timer coin box system 3 Power supply Connecting the mains voltage Live components A Risk of fatal injury due to electric shock when touching live parts Switch off mains voltage Protect against re connection Both the power supply and the related connection work must comply with national standards e g those set up by VDE in Germany The connection work must only be performed by qualified expert staff The connection to the 400 V mains must be protected by fuses Their specifications are listed in the chapter Technical data A residual current operated circuit breaker RCD with short time delay is absolutely required KBL AG recommends the following type KBL 3200 0770 00 type Typ ABB F 204 A 40 0 03 AP R Should the operation of the tanning unit cause any interference in the power supply network e g with ripple control systems TRA consult your power supply company to have corresponding blocking el ements audio frequency suppressors installed mains connection m
13. T BUTTON Starts the tanning session during the warm up time as well as after an interruption caused by pressing the STOP button provided that the booked tan ning time has not elapsed yet SKBL During the session you need quick access to basic functions such as volume control body fan and internal MP3 Player You should also be in a position to change the subordinate functions The control panel caters for both requirements You have Basic functions e direct access to frequently needed functions via the Basic functions section and e access to the subordinate functions you made via the variable section of the control panel display according to the rotation principle Variable section of the control panel During the session you continue to have access to the The basic functions portrayed here subordinate functions If you wish to make any changes refer to a fully equipped tanning bed you can do so in the variable section of the control If you have chosen a simpler equip panel By pressing one of the arrow buttons A y ment package functions from the above or below the changeover symbol el all available variable operating elements auto functions will be displayed one after the other according matically take the place of the miss to the rotation principle You can switch these individual ing basic function functions on or off and if possible make changes to the settings Prerequisite
14. activates the internal MP3 player Not available in this system Factory setting off 24 Operating Instructions space 3000 pureCollagen AUDIO 2 MP3 Line In Fon gt off Activates and deactivates the line in connection bench part right hand side of the head end for units from standard line level to low loudspeaker levels MP3 player iPod etc PT EXT JL DOWN Factory setting on 2 gt bed gt puls code an C T Ext DOWN Allows for the change over between pulse code and BCD code mode with the Studio signal pending and deactivates the external channel selection Factory setting bcd AUBIO BE Humber of studio channels gt 2 s I T EXT I DOWN If bcd has been preselected the number of channels available in the studio is specified here Factory setting 4 AUDIO Music nonstop Fon gt off If this function is active music is played nonstop i e also out of tanning sessions 1 EXT JL DOWN Factory setting off 5 AUDIO Honskop music source gt MP3 internal gt Studia Line In Allows for choosing the permanent audio source for the Music nonstop function Factory setting MP3 internal 1 EXIT DOWN Sets the volume for the tanning mode Factory setting 6 STORE L up AUDIO Default volume standby I EXT DOWN Sets the volume for the standby mode Factory setting 3 AUDIO Maximum adjustable volume
15. age Contact your Customer Service Use CAN BUS operaters V2 Check connector parameter storage If necessary re place parameter storage Check connector parameter storage If necessary re place parameter storage Restart the controller Contact your Customer Service after the third unsuccessful restart Check mainboard connector X6 E6 37 38 No 205 206 210 212 213 214 216 217 220 221 222 223 224 228 229 Info message Connection audio module faulty Connection inside display faulty Low battery charge please re new Connection RGB module faulty SD card missing SD card unreadable Error voltage supply please check No voice files on the SD card pleas check OW to many sensors OW sensor Typ B missing OW sensor Typ S missing OW sensor read error Check tubes and temperature sensor in the door delta gt 5 Check tubes and temperature sensor in the door temp lt 30 Pleas close the door check exhaust air INFORMATION MESSAGES Description Communication between control and mod ule display has been interrupted Button cell CR 2032 of the control board discharged Communication between control and bus module has been interrupted No SD card in the audio module SD card defective incompatible content Power supply to the mainboard varies No voice files on the SD card found General OneWire sensor error Temperature differ
16. ains connection 400V 3N 50Hz coupling box with fuses see technical data and residual current operated circuit breaker RCD with short time delay Typ ABB F 204 A 40 0 03 AP R KBL 3200077000 PE L1 L2 L3 N brown or 2 w S green yellow black or 1 Connecting an external timer Connect the external timer e g coin box studio control according to the instructions supplied with the timer The following diagram shows the wiring of the timer connection A door contact is necessary for the option cabin fragrance connection timer connection to the coin box external timer Operating Instructions space 3000 pureCollagen 9 10 SKBL Connecting an external audio source The cinch marked in the illustration is connected to the external audio source where the line out of the sound player or the headphone loudspeaker jack are available for connection Operation using different audio sources The tanning unit can be operated using the following audio sources e An internal audio source Various external audio sources e All available audio sources The audio source can be changed via the control panel INTERNAL MP3 PLAYER When using the internal MP3 player you can either play the music tracks that are originally supplied on the SD card or you can record your own tracks to the SD card EXTERNAL AUDIO SOURCES LINE IN As an external audio source you can connect devices ranging fro
17. ange of colour in a cycle of 15 seconds Factory setting 9 gt press ENTER 1 EXT DOWN Not available in this system L STORE UP UU LEUEL ALE PERSONAL PIN SET UU LEUEL 1 EXT I DOWN These settings must only be made by trained service personnel STORE I UP SERVICE z Loads the factory default settings DE SERUICE F IMAL FIH gt press ENTER 1 EXIT DOWN Submenu call with START ENTER SUBMENU STORE L Up SERVICE PERSONAL PIN 81 81 PERSONAL ENTER SOLARIUM PERSONAL FIN N gt FIH PY EXT JL DOWN PERSONAL PIN activate deactivate Enter your personal PIN SERUICE EPA I 1 EXT I DOWN Submenu call with START ENTER Displays the current firmware typ variant Operating Instructions space 3000 pureCollagen 29 SKBL Post STORE L UP SERVICE 84 18 1 EXT Od DOWN PT Exit DOWN Submenu call with START ENTER Displays the cur rent firmware version of the system components Troubleshooting mode The service mode is switched on for 30 minutes The mains voltage is connected Error notifications Do not operate the system with different are ignored but tanning cannot be started firmware versions All system components must be equipped with an identical firmware version P STORE I UP SERVICE 2 1 EXT I DOWN PT EXT JL DOWN Troubleshooting mode Submenu cal
18. ct his or her own player such as an MP3 player an iPod etc Use a standard 3 5mm jack cable included if the music option has been ordered Connect the jack plug to the earphone jack of your player Then select MP3 ext as the audio source from the control panel of the tanning device before you start play ing your own tracks from the player The tracks can only be selected via the users own play er The volume can be controlled via the control panel of the tanning device and also via the corre sponding operating elements provided by the user s player Operating Instructions space 3000 pureCollagen 11 12 SKBL Before switching on for the first time e Determine the presettings for the device in the service menu e Check correct installation of fluorescent tubes The tube labeling must be visible otherwise no effect may be obtained e Store these Operating Instructions in a place that allows for easy access at any time Operating modes The three different operating modes are explained below STANDBY The unit is in an idle state i e it is connected to the mains but is currently not being used The tubes are switched off From the standby mode you can change over to the operating mode or to the service mode OPERATING The tubes are switched on and a session is in progress While the unit is in operating mode the settings for the ongoing session can be changed via the control panel SERVICE
19. e desired tracks AUDIO FUNCTIONS There is a maximum of two audio sources available at the users disposal If you change over to another source you must activate it first The activation is effected by pressing the or the button All inactive audio functions are marked with OFF on the display so that you can easily recognise the active audio source MP3 EXT el OFF ow activate FL Faw a S lel Operating Instructions space 3000 pureCollagen SKBL When the unit is in service mode you can make the presettings for operation in tanning mode and you can have values concerning the operation of the device displayed While the tanning unit is in standby mode you can switch the decorative lighting of the device on and off Layout of the display numbers The buttons of the interior display are allocated double functions In addition to the standard operating elements they stand for numbers that in standby mode provide access to standby and service functions Simply enter the corresponding sequence of numbers on the display Switching the decorative lighting on and off 9 0 5 NOTE The connection times of the decorative lighting can be set in the service menu individually for each day of the week There are two independent connection periods A and B available for each day of the week Invoking the service menu 1X6 K1 KOKO KO KO NOTE Do not let too much time pass between
20. e in the country of operation The unit must only be installed and assembled by specifically trained staff Arbitrary modifications or conversions of the equipment are not permissible Observe all danger signs and safety notices attached to the equipment Safety notices must not be removed and safety equipment must not be disabled or removed The unit must only be operated when in perfect working condition Never operate the unit with the outer covers or acrylic panes removed The system must be controlled via a timer that complies with the generally applicable standards Absolutely observe the maintenance frequencies indicated in the maintenance plan Updating the system software ATTENTION Risk of damage by switching off the power supply voltage Disconnecting power supply during the up date process will lead to damage of electronic components Make sure that the unit is not disconnected from the power supply voltage during the update To accomplish the update download the USB Con nect software offered by KBL For detailed informa tion press the help button in the main menu Operating Instructions space 3000 pureCollagen 7 SKBL Description of the unit Standards SIDE VIEW DOOR OPENED This system complies with the following standards in their respectively applicable version EN 60335 1 EMC 2004 108 EC Low Voltage Directive 2006 95 EC Views FRONT SIDE OF THE TOW
21. efully to the place of installation Overturning load Danger of being crushed by heavy parts of the equipment e Wear safety shoes Other modes of transport If a forklift truck cannot be used for transport the box must be unpacked and the parts inside must be transported individually to the place of installation e g using a dolly Depending on the weight of the components lifting them might require several people Old equipment disposal This device consists of components that g cannot be thrown into the household garbage Dispose of your old equipment in an environmentally friendly manner after the end of its useful life Met als and plastics can be recycled Electrical and elec tronic components must be disposed of as e waste Fluorescent lamps must be dropped off at authorized collection points for pollutants This helps to avoid damaging effects to the environment and human health caused by improper disposal This makes a valuable contribution to recycling and other forms of utilization of old electrical and electronic equipment You can obtain information about environmentally friendly disposal from your local government or the municipal administrations Service For all service related questions please contact your responsible specialist dealer Operating Instructions space 3000 pureCollagen 5 6 This chapter provides a summary of general infor mation on safety and proper handling of
22. ence to high between the one wire sensors Minimum temperature is not reached or is fallen below in operation mode Temperature rise of 1 5 degrees in 18 sec onds Operating Instructions space 3000 pureCollagen Remedy Check replace the patch cable Acknowledge the message by pressing START If the fault persists contact your Customer Service Replace the button cell CR 2032 Check replace the patch cable Acknowledge the message by pressing START If the fault persists contact your Customer Service Insert an original SD card See chapter Recording to an SD card Removing the SD card Insert a new original SD card Acknowledge the message by pressing START See chapter Recording to an SD card Removing the SD card If the fault persists contact your Customer Service Check power supply to the mainboard Rebuild voice folder on the SD card If necessary replace original SD card Contact your Customer Service Check tubes and thermal sensors in the door Contact your Customer Service Check tubes and thermal sensors in the door Contact your Customer Service Close door Check exhaust air KBL Ambient conditions Installation site In dry rooms booths with sufficient airing and ventilation e max Relative air humidity lt 70 e max Room temperature lt 30 C e Minimum height of the room 2270 mm Electrical connection values Protective class Mains voltage Wire cro
23. l with START ENTER Displays the first The service mode is switched on for 10 minutes and the last Software Upload The mains voltage is connected Error notifications are ignored tanning can be started After this pe riod there is a 3 minute restart lockout eT STORE Tp SERUICE 86 18 il SERVICE ag PT EXT 7 DOWN 2 LARIUM IGEHTIFICATION Only for devices with LED technology lp Colour adjustment of the LED decorative lighting a Factory setting 2 Show the characteristics of the device p p Configuration code SERVICE a 16 Variant code Serial number Submenu SERVICE MODE Invoked by pressing START ENTER gt PIN I ET L DOWN Branches to further configuration options SUBMENU SERVICE MODE These settings must only be made by Service mode without tanning i i train rvi rsonnel Service mode with tanning ained service personne 30 Operating Instructions space 3000 pureCollagen SKBL SERU 18 18 Performs a restart of the electronics Attention All unsaved changes will be discarded STORE 3 Up EVENTLOG 81 81 PT EXT LD DOM Lists the latest 99 events error codes amp info messages Detailed information is available by pressing the Start button Example no time date code tanning time 001 16 44 05 01 09 0011 03 23 002 15 22 05 01 09 0002 07 22 003 10 07 22 12 08 004 17 16 005 099 Operating Instructions space 3000 pureCo
24. list if they are defective In this case contact the service department There are 2 decorative tubes beneath the door panel Turn the tube a quarter turn to the right and take it If the device is lighted by means of fluorescent lights proceed as follows out towards the front Replace the tube the colour filter if present and the starter Fasten door panel and door facing again Tubes are located in the door and in the side parts to illuminate the device The color filter must be LATERAL PARTS changed along with the tubes at the latest Dismantle the acrylic pane in the respective lateral part as described in section Cleaning and replacing DOOR Loosen the door facing at one corner and slowly pull the acrylic panes Remove the two front tubes in the left and right lat it forward with the aid of a suction cup eral part they are marked in the illustration below Underneath you will find the lighting equipment Loosen the two screws of the door panel and lift the panel carefully out of the side guides Operating Instructions space 3000 pureCollagen 35 36 SKBL Replace the lighting tube and if present the colour filter with new parts i Re install the tubes and the pane Recording to an SD card REMOVING THE SD CARD The SD card slot which contains the storage medium with the MP3 data from the internal MP3 player is accessible through a maintenance hatch on the left hand side
25. llagen 31 32 Regular maintenance is required for the safe opera tion of the towers and has to be documented Clean ing is to be performed when necessary Live parts Risk of fatal injury due to electric shock when touching live parts e Disconnect from mains and secure against reconnection KN e USE ONLY ORIGINAL SPARE PARTS S e Replace illuminants and filters only with ones wich are characterized on the device Instructions for cleaning and care GENERAL Before starting to clean the unit take off any rings bracelets watches etc that you might be wearing in order to avoid scratching the surfaces Cleaning fluid must not run into the appliance TUBES To preserve the power we recommend cleaning the tubes and lamps with warm water and a chamois af ter approx 200 hours of operation ACRYLIC PANES For cleaning the acrylic panes use the special cleansing agent and disinfectant megaClean sup plied by KBL and dilute it in water at a ratio of 1 13 Operating Instructions space 3000 pureCollagen VARNISHED AND PLASTIC PARTS To clean the varnished and plastic surfaces use a damp soapy cloth Do not clean the big plastic parts with a dry cloth This might scratch the surfaces Tocleanthe mirror plate of the floor proceed as follows Use a damp chamois and spray megaClean onto it sparingly Then wipe the surfaces clean NEVER CLEAN WITH A DRY CLOTH Prevent the corners and edges from getting
26. ly selected group l2 EVEHTLOG i is highlighted Press the START ENTER button to access the desired group menu The currently active function circle is displayed in the centre line on the left hand side You can invoke further functions of this group by pressing 4 UP or 9 DOWN Function group AUDIO MPS internal Function Settings SKBL CHANGE SETTINGS Depending on the respective function you can change values select options and switch functions on or off To do so use the buttons 2 and 7 Example Changing a value Example Selecting an option EHUIRONMENT Example 2 Switching a function on off Poe STORE Tp D AUDIO MPS internal STORE amp EXIT e Save your settings by pressing the button 3 STORE If you fail to do so the system will not take over the changes you made gt See also chapter Service Menu Timeout By pressing the STORE button you save all changes you have made in all menu items STORE FUP AUDIO MPS internal gt DIFF PT EXT 7 DOWN By pressing 8 EXIT you go back to the previous menu level or you exit the service menu OR AUDIO MPS internal gt OFF I 1 EXIT 1 DOWN SERVICE MENU TIMEOUT After performing your last operating action you have 2 minutes left to save the changes you have made Then a prompt appears and all changes are auto matically disca
27. m the standard line level to low loudspeaker levels These sources comprise e Studio music e External players such as MP3 players mobile phones cell phones I pods etc Operating Instructions space 3000 pureCollagen EXTERNAL 100 V AUDIO SIGNAL ON STUDIO CHANNEL OPTIONAL FEATURE If you decide for a connection to a 100 V audio system you will need a transformer KBL no 9100 0170 00 for the transmission of the audio signal This connection must be made by trained service staff Connecting the channel selection The following diagrams show the wiring of the chan nel selection on the audio equipment s side for pulse coding as well as for BCD coding Wiring on the audio system of the studio puls coding Wiring on the audio system of the studio BCD coding Control voltage CHANNEL BCD 0 BCD 1 1 0 0 2 1 0 3 0 1 4 1 1 SKBL Level adjustment studio music The voice audio system components are installed in the back part of the tower The potentiometer which serves to adjust the external audio signal level is accessible through a maintenance hatch on the left hand side of the tower To avoid overdrive select the level adjustment accordingly The level setting depends on the strength of the external signal and should be carried out by a service engineer External Players A line connection has been integrated into in the head area near the interior display so that the user can con ne
28. rded after an additional 20 seconds SERVICE MENU AUDIBLE SIGNALS For user convenience operation and storage processes are acoustically acknowledged in different Ways Operation process gt short sound Storage process gt long sound Operating Instructions space 3000 pureCollagen 19 20 SKBL KBL 7 Service menu Overview VERSION 01 13 1 ENVIRONMENT Language Contrast TIME AND DATE TIMER DECORATIVE LIGHTING Maximum tanning time 2 HOUR METERS Operating hours overall Operating hours UV tubes Operating hours collagen tubes Number of sunbath 3 PRESELECT UV Typ AD Audio Voice megaVoice 3 Aircon aircondition Aroma 43 Aqua aquaCool 4 AUDIO MP3 internal megaVoice megaVoice language Studio Line in usb MP3 MP3 external Line in Studio channel selection Number of studio channels Musik nonstop Nonstop music source Default volume tanning Default volume standby Maximum adjustable volume megaVoice volume adaption Dynamic volume adaption 6 Treble MP3 USB High bass MP3 USB 6 Low bass MP3 USB Volume adaption Studio Line In 65 Treble Studio Line In High bass Studio Line In Low bass Studio Line In 5 AQUA aquaCool aquaCool spray time Cycle time aquaCool start test cycle aquaCool endurance test aquaCool start initialization Operating Instructions space 3000 pureCollagen 6 AROMA Aroma Aroma status reset Cycle time Aroma cabin au
29. sion During the session the door must remain closed in order to ensure that the ventilation works properly e Close the door and place yourself in the middle of the tower booth in such a way that the distance between your body and the surrounding lamps is about equal at any point e Put on protective goggles e The session will commence automatically after the warm up time controlled by the timer has elapsed During the warm up time the session can be start ed manually at any time by pressing the START button BUTTONS ARROW BUTTONS Control the functions Allows the selection of subordinate functions STOP BUTTON Stops the tanning session if pressed for at least two DISPLAY seconds Shows the menu items and functions Indicates the tanning time information line Operating Instructions space 3000 pureCollagen Operation during the session You can control the functions of the device via the control panel during the tanning session It is particularly easy for you to access the basic functions Buttons with recesses that can easily be sensed allow for easy operation of the system even with your eyes closed NOTES 20 seconds after your last input the display changes over to the indication of the tanning time An information line at the bottom edge of the display informs you about currently selected features Fu an gt Position I SS recessed button s avi angi STAR
30. ss section Fuses Nominal power IP 20 400 V 3N 50 Hz 5 x 2 5 mm Olflex Automatic fuse K type safety cut out 3 pole 3x 25 A with residual current operated circuit breaker FI 9000 W Air discharge optional feature Fan Exhaust air hose Diameter 300 mm Minimum capacity exhaust air 2000 m h Diameter 300 mm Unit data tower space 3000 pureCollagen Tubes Dimensions in mm Height x Width x Depth Weight MP3 player 44x Collagen plus 1 9 18 Item no 3230074786 2180 10 x 1400 5 x 1498 5 closed 2180 10 x 1400 5 x 1958 5 opened approx 385 kg e Supports SD cards up to 1 2 GB SD 4 16 GB SDHC Supported file system SD card FAT16 FAT32 e Supported MP3 files constant and variable bit rate 96 320 Kbit s Operating Instructions space 3000 pureCollagen 39 SKBL Views 1400 N amp amp N NN amp A A Ponte 2270 2180 PURE OLLAGEN 40 Operating Instructions space 3000 pureCollagen SKBL Operating Instructions space 3000 pureCollagen 4 SKBL 42 Operating Instructions space 3000 pureCollagen SKBL Operating Instructions space 3000 pureCollagen 43 PURE LLAGEN KBL AG RingstraBe 24 26 56307 Dernbach Germany fon 49 0 26 89 94 26 0 fax 49 0 26 89 94 26 66 E Mail info kbl de www kbl de
31. the device More specific safety advice is given in other chapters of the operating manual Intended use The device is used to vitalize the skin by building the collagen structure of the connective tissue The fol lowing individuals must not use the system e People with all forms of light sensitivity e Persons with an impaired warmth e Persons with heart pacemakers If there are special concerns about a light therapy consult a physician Furthermore this unit has been designed for use by individuals who are in full command of their physical sensorial and mental faculties Moreover sufficient knowledge and experience are required Children should be supervised to make sure that they do not use the unit as a toy Duties of the operator KBL AG cannot be held liable for any damage resulting from improper use of the equipment or non observance of these operating instructions Only use original replacement parts Only replace tubes with those listed on the device Otherwise this voids the operating authorization and warranty Operating Instructions space 3000 pureCollagen Timer operation The unit must be controlled via an external timer Should the external timer fail an internal timer will switch off the system automatically after 44 minutes SKBL General safety advice Follow all instructions given in this manual In addition observe all relevant statutory provisions and regulations also those applicabl
32. the individual keystrokes when entering a sequence of numbers Operating Instructions space 3000 pureCollagen 17 18 SKBL Service menu Basics In standby mode the service level is accessed by entering 161 followed by PIN 0000 There is one additional condition that must be fulfilled e No incoming signal from the coin box system SERVICE MENU ELEMENTS After having entered the service PIN the service STANDARD OPERATING menu is at your disposal Navigation is made via the following buttons See also chapter Layout of the display numbers e Use buttons 4 UP and 9 DOWN to browse through the individual menu items and functions e Press the START ENTER button to go to the corresponding submenu e Button 2 and 7 are used to switch functions on and off and to modify values e Press 3 STORE to save all modifications made in all menu items e Press 8 EXIT to go back to the previous menu level or to exit the service menu ON STORE UP OFF EXIT DOWN Operating Instructions space 3000 pureCollagen SERVICE MENU BASIC OPERATION The service menu is divided into the main menu and subordinate groups of functions If you choose a menu item e g AUDIO you will get access to all functions related to this item Q MAIN MEN aA Pp e Select the desired function group from the main menu by pressing the 4 UP or the 9 DOWN button The Mi current
33. tomatic Aroma cycles per hour TIMER AROMA Aroma start test cycle 7 AIR CONDITIONING 6D Air condition Start level body fan 8 RGB amp RGB mode 9 6 EASYCARE 10 63 UV LEVEL 11 SERVICE Load factory defaults 6 Personal PIN FIRMWARE TYP FIRMWARE VERSIONEN SOFTWARE UPLOAD RGB Setup SERVICE MODE Service mode without tanning Service mode with tanning SOLARIUM IDENTIFICATION SOLARIUM X CODE Reboot 12 EVENT LOG Personal PIN In delivery condition some menu items are protected by a factory PIN Optionally the factory PIN can be replaced by a Personal PIN e You will receive the Personal PIN with the prod uct documentation The personal PIN may be activated or deactivated by selecting the SERVICE Personal PIN setting in the service menu Every software update deactivates the Personal PIN Personal PIN secured menu items may PERSONAL PI N be identified by the personal PIN logo as given in the service menu Service menu options e In order to avoid operating errors read through the basics at the begin ning of the Service Menu section Always remember to save your settings by pressing STORE e All menu items that comprise further submenus are displayed in CAPITAL LETTERS EHUIRONMENHT gt German gt English PT EXT JL DOWN Sets the language of the menu Factory setting German L STORE L UP ENVIRONMENT 82 85
34. um section Due to the pane being can then be removed u bent it rests in its position Operating Instructions space 3000 pureCollagen 33 34 SKBL Cleaning and replacing the tubes By regularly cleaning the tubes see Cleaning and care instructions you can help preserve their tanning power When replacing the tubes you must also replace the starters Replace tubes and starters only against ones of the same type The colour filter of the unit lighting must be replaced whenever the tube is replaced Dismantle the acrylic panes as it is described in the section Cleaning and replacing the acrylic panes Dismantle the tubes by turning each tube a quarter turn towards the front or towards the back and then pulling it out Operating Instructions space 3000 pureCollagen To clean the tubes use warm water and a chamois Do not use any aggressive detergents or agents con taining alcohol When installing new tubes replace the starters first Installing the tubes Make sure that the inscription on the tubes is visible for otherwise there will be no tanning effect The assembly is carried out in reverse order Reset the operating hours counter in the service menu SKBL Replacing the unit lighting Caution If the device is lighted by means of high perform Place the door panel carefully on a pad ance LED s Four Seasons these can only be re ded surface placed by a qualified specia
35. wet CLEANING AGENTS The surfaces and the acrylic panes must not be cleaned with concentrated disinfectants or sol vents or other liquids that contain alcohol Maintenance intervals Component i Replacement wearing part Cleaning Tubes after Tubes and approx 200 After 500 operating starters operating hours hours When Acrylic panes When necessary necessary Colour filters Bake When Whenever tubes of unit light i necessary are replaced ing Cleaning and replacing the acrylic panes The acrylic panes can exhibit small inclusions and reams During operation hairline cracks can also develop This does not affect or hardly affects the tanning properties and does not represent a quality flaw The panes are cleaned whenever necessary When cleaning the inside it is recommended to take the occasion and clean the tubes too The instructions for cleaning and care must be observed The outer surface can be cleaned without any preparatory works The panes are dismantled as follows Push the pane centrically towards the tubes e g with your elbow and pull the upper right hand cor ner of the pane out with the help of the suction cup To install the pane insert its entire left hand side and press it against the aluminium section Take hold of the pane from behind and release the Bend the pane and push it over the right hand edge right hand side in a downward movement The pane FR of the alumini
36. y V1 is incompatible CAN BUS preSelection dis play V1 is incompatible CAN BUS audio module full V1 is incompatible CAN BUS RGB module V1 ist incompatible Parameter storage write er ror Parameter storage read error Frequency detection detec tion failed Frequency detection power supply connection faulty connector X6 E6 Description Bimetal switch triggers Enabling signal from coin box system comes in longer than the time value approved under Maximum tanning time voltage remains connected Bimetal switch in the fan triggers Mainboard defective Maximum write cycle flash memory reached Update via SD card failed CRC fault Update via SD card failed access error Parameter storage not found please con nect and restart Parameter storage no valid serial number CAN BUS operators incompatible Parameter storage write error Parameter storage read error Frequency detection failed Frequency detection failed No mains volt age Operating Instructions space 3000 pureCollagen Remedy Check the air intake air discharge system Let the sunbed cool down Disconnect from the coin box system Make sure the fan runs freely Check the air intake air discharge system Let the sunbed cool down Contact your Customer Service Contact your Customer Service SD card check replace SD card check replace Check connector parameter storage If necessary re place parameter stor
Download Pdf Manuals
Related Search