MetalFe(S)t User`s manual About the pedal`s sound
Contents
1. Lorg Effects METALFE S T USER S MANUAL Please read carefully this manual there s some hidden features you must know and important information to help you protect your ears Please feed the pedal with a 9v or 12v supply The pedal is adjusted for 9v It will consume 65mA maximum ABOUT THE PEDAL S SOUND Violent brutal raw extreme thunder aggressive sounding This is the purpose of the Metalfe s t The metal fe s t is built arround a five stage FET distortion for natural tube like sounds with lots of dynamics followed by an active Eq for extreme sounds tweeking From 80 s hard rock to modern crum crum the metalfe s t can do it all and more The pedal has a lot of gain But still it can sound very big at low gain depending on the Eq s settings Plus with its two gain controls you can think of this box as a crunch lead channels sharing the same Eq Due to a lot of controls on the Eq the overdrive can either sound very bad or very good it s up to you to dial in the tone who s best for your ears Bonus The metalfe s t is also very good on bass to generate fat overdriven tones Note With an Eq it is normally better to remove frequencies amplifying a frequency adds noise But it is not always possible WHAT ARE THESE KNOBS FOR Vol Sets the overall volume of the effect Bass Adds or remove bass frequencies from the sound Neutral position is at 12 o clock Adding to much may result in a muddy sound Mi2. TED These settings has been designed with a 2x12 closed cab if you re using an open cab or smaller HPs it might not sound at all like it supposed to
3. d Adds or remove medium frequencies from the sound Neutral position is at 12 o clock Roll down for a notch filter producing scooped sound don t roll it too much though Roll it up for mid glam rock or raw sounds Freq Set the frequency around which the mid knob will add or remove frequencies The course goes from 100Hz to 10000Khz Tip Set the bass and treble in neutral position and set the mid all the way up play a rich overdriven chord and turn the Freq knob to hear the frequency span Treble Adds or remove high frequencies from the sound Neutral position is at 12 o clock Adding to much may result in a very harsh sound SM This is not a bondage leather and nails knob the SM is for smooth If you turn up the Treble knob the sound can becomvery harsh The SM button is here to temper the harshness Try different combinations of SM and treble knobs to get more vintage and smooth or more modern andagressive trebles Gain setup the base gain from the pedal Keep in mind that adding gain adds hair to the sound but removes dynamics More setup the gain from the pedal when the button more is kicked in The two knobs Gain and More works together The button more lowest amount of gain begin where the Gain knob has been set up to the maximum gain of the pedal If Gain is at the maximum More will have little effect But if Gain is around 12 o clock More as a more interesting span SOME EXAMPLES OF SETTINGS TO GET STAR
Download Pdf Manuals
Related Search