Home

4 ch_voip2all_manual_eng_v2 2

1. 3 KiB gt TH bytes 750799 1733 2 Kid Link encap Local Loopback inet addr ii27 8 68 1 Mask 255 6 6 8 UP LOOPBACK RUHNING MTU 16436 Metric RA packets 6 errors 6 dropped 6 overruns 6 frame TH packets 8 errors 4 dropped 4 overruns 4 carrier collisions txqueuelen Re bytes 46 H B BE TH huytes 6 8H 6 E gt Connected 00 01 40 115200 M i 12 The IP Address of the Gateway is marked in a red circle VoIP2All Series 4 Channel Gateway User Manual
2. Com Port Chapter 3 2 Setting Up the Clock Go to System in the tool bar Select in the Date box the date of the VoIP ALL gateway Enter in the Time box the time of the VoIP ALL gateway Select in the Date Format how to display the date Day Month Year or Year Month Day PWN PB Press Save to change the time and date Chapter 3 3 Changing the IP Address of the Gateway Open the VoIP window select the General tab Inthe IP Address box enter the new IP address for the gateway Press Save Disconnect from the gateway Mm A W N B Restart the gateway wait 30 seconds for initialization connect with the new IP address Chapter 3 4 Internal SIP Server The Gateway has an internal SIP Server that is able to register up to 32 SIP clients This SIP client can be a VoIP phone or external SIP Servers or IP PBX VoIP2All Series 4 Channel Gateway User Manual 11 By default the Internal SIP Server works without authentication you can register with no password and you can choose any user name The user name should be a number Registering a VoIP phone in the Internal SIP Server 1 Open the configuration page of the SIP phone 2 Set up the following registration parameters e The SIP Server IP Address the IP address of the gateway e The SIP User ID the chosen number for this extension any number The Authentication Password may be left empty 3 Save settings 4 Re
3. Press OK to confirm update Deleting a User from the List To delete a user 1 Press the Delete button of the user located at the end of the user line in the list 2 Press OK to confirm the delete Searching for a User To find a user in the list 1 Inthe Search Field box enter the field to search by 2 Enter the Value to search 3 Press the Search button 4 The list will show all the users that come up on the search 5 To return to the complete list press the All Users button Chapter 8 2 User Capabilities DISA The DISA is a way for a GSM mobile phone to call back to the VoIP extension that called it Settings 1 Change the Capabilities value to 1 to enable the DISA for the user 2 When a call from the VoIP to the GSM number of the user is made the Gateway will save the number of the extension that called it 3 Enter in the DISA box in the Prefixes tab located in the VoIP window the number of seconds the Gateway will remember the extension number 4 In the defined time the user wishes to call the Gateway from the GSM number the Gateway will give him a dial tone to call The user may dial any number or press to return to the extension that called last 5 If a few extensions called the user Pressing will go to the first extension that called upon the next GSM call dialing will go to the next extension that called 6 Each extension number can be called on
4. Server that can register up to 32 VoIP clients The VoIP ALL can connect each of these VoIP clients to the cellular network directly therefore completely bypassing the local landline telephone company The VoIP ALL has up to 4 SIM ports and a VoIP SIP Server The VoIP ALL can connect a VoIP Client to another VoIP Client You are also able to call from one of the cellular ports and to another cellular port Each cellular port has one SIM local sim and the ability to work with SIM from any VoIP2ALL SIM Server The VoIP ALL is able to connect to up to 20 external SIM Servers Each cellular port can be programmed to work with any of the SIMs in the SIM Servers at any given time The Gateway may be configured to direct calls through the most economic SIM According to your service providers rate plan PC Management Mobile MS Windows Application Cell Phone IP Phone 7 IP Phone IP p NETWORK amp 4 VOIP IP Phone Mobile Cell Phone VoIP2All Series 4 Channel Gateway User Manual 7 Basic Terms e Gateway A VoIP ALL unit with cellular ports e SIM Server A VoIP ALL series unit with a SIM Server program containing SIM cards and no cellular cards e Internal SIM Server A SIM Server program that runs on a gateway allowing access to SIM cards in the gateway e External SIM Server A SIM Server program that runs on an external SIM Server or another Gateway allowing access to SIM cards in the
5. Table Open the Time Table tab to assign the SIMs to a user defined time slot s Type is the form of the timetable e Monthly The table will show all the days of the mouth e Weekly The table will show all the days of the week Swapping Type is the way to replace the SIMs Time Table The SIMs will replace at end of their defined time in the timetable In this mode you set up a timetable and define which SIM will work in what hour VoIP All Series 4 Channel Gateway User Manual 26 2009 DTT VoIP2All USER MANUAL e Call Duration The SIMs will replaced when thy end their defined calling minutes In this mode you set up in the table a list of SIMs for each SIM in the list you define amount of calling units to use each SIM will work for the defined calling minutes and will replaced with the next SIM on the list Assigning a SIM to Work in a Port at a Specific Time 1 2 3 4 Oo oyu 11 Select a port from the list of the ports in the left In the Type category select the form of the timetable monthly or weekly In the Swapping Type category to work by timetable select time table Select a SIM from the list of available SIMs at the top The list is organized by the SIM Servers La Local 1 at the top of the list is the port s local SIM on the board of the SLAVE card The top row of the Timetable represents dates and the left column represents h
6. cccceeceeeeeeeeeeeeeeaeeeeaeeeeaeeesaeees 10 Chapter 1 3 Installing the SIM Cards in a SIM Server Card c cececeeeeeeeeeeeeeeeeeeeeeeeeeeees 10 Chapter 1 4 Connecting the Cables stesscducessdsuntseresuterinnystievnnaeivebeano senna ieleanostultetnadivbensetl 10 Chapter 2 Installing the Manager Application ssssssssssssssrssrssrrsrrrrrerrrerrsrrerrsrrrrrrrrerrerrerren 11 Chapter 2 1 Install the VoIP2ALL Management Application into an MS Windows PC 11 VoIP2All Series 4 Channel Gateway User Manual 3 Chapter 3 VolP2ALL Basic Operations sssenssovriccakvassunnpeidnnt opineranaganiaiccnpbaee nelvaaNato user iaeidvertawianen 11 Chapter 3 1 Connecting the Menagement software to the VoIP2ALL 0eeeeeeees 12 Chapter 3 2 Setting Up the clock reessione 12 Chapter 3 3 Changing the IP Adress of the gateway sssssssssssersrsrrrsrrresrrrerrrrerrrerrrernne 13 Chapter 3 4 Setting up the Internal SIP Server sssssssssssssssrsrssrrserrrrrsrrerrerrsrrerrsrrrerrrrrene 13 Chapter 3 5 Working with Local SIM cccccceeeeeeeeece cece eeeeeeeaeeeseeeseeesaeeeaeeeaeeeaeeeseeesaees 13 Chapter 3 6 Assigning a prefix to a port cccecccceecece cece eeeeceeeeceeeeseeeesueeeceneeaeeeeseneeaaees 14 gel 57 ORIG e e P E E E E T tian TE T PA Chapter 3 8 Connecting IP PBX to the gateway sssssssssssserrssressrssrrrerrrerrerrrerrerrrerrerres 15 Chapter 3 9 Connecting the Gateway to IP PBX asssssssss
7. connect the IP PBX to the Gateway There are two ways to connect the external SIP registering the SIP in the Gateway SIP Server or working without registration Registering external SIP Server in the Gateway SIP The procedure is the same as in registering with VoIP Phone see Chapter 3 4 Internal SIP Server 1 Open the SIP Registration page of your SIP Server or IP PBX 2 Setting up the registration parameters The SIP Server IP Address is the IP address of the Gateway e The SIP User ID is the chosen number for this extension The Authentication Password when working with authentication 3 Save the registration settings 4 Register with the new account Working without registration 1 Open the configuration page of your SIP Server or IP PBX Set up the SIP Server IP Address to the IP address of the Gateway Remove the mark from Register in the domain Save the configuration settings nn fe WN Now you will be able to call without registering your SIP Dialing from the IP PBX When calling from an IP PBX to cellular via the gateway The number of the mobile phone needs to be sent in the INVITE message of the SIP To set up the dialing from the IP PBX to a GSM mobile phone through the gateway e Dial from the PBX to the gateway e view the Monitor of the gateway check the number that the gateway dialed i e 39 0545555555 e Goto the prefix table of this port e Setup the prefix of this port i e
8. external SIM Server e Master card The part that controls the operation of the VoIP ALL Contains a DSP processor with a linux based operating system e Slave Card The part in the gateway that controll the cellular ports modules e VolP A protocol of transmitting voice calls on ethernet networks e SIP Aprotocol of registering VoIP clients and making VoIP calls e SIP Server A virtual PBX that can register and connect SIP phones e SIP Account A user name and password which is given to a SIP phone to register with e SIP Registration The proccess of the initial connection to the SIP Server with the SIP acount e SIP Client A SIP phone that is registered in a SIP Server e Internal SIP Server The SIP Server that is built in the gateway e SIM Registeration The activation of the SIM in a cellular network Only when the SIM is registered you can make calls e Local SIM A SIM on slave card e Virtual SIM ASIM froma SIM Server VoIP2All Series 4 Channel Gateway User Manual 8 2009 DTT VoIP2All USER MANUAL Chapter a Installing SIM Cards amp Connecting Cables Chapter 1 1 Hardeware Overview The gateway consists from four main parts The Master Contains a AudioCodes DSP processor with a Linux based operating system Using a Linux operating system run the v2g program that operates the gateway The Slave Contains 4 cellular ports Each port has one local SIM Each card has
9. is preformed according to the BCCH Timer measured in seconds between all BCCH which have better reception than the BCCH rssi e Bill Interval The interval for each unit see Chapter 4 2 1 VoIP2All Series 4 Channel Gateway User Manual 29 e Units per Interval The units for each interval see Chapter 4 2 1 e Recharge Value Current Balance Currently not in use Chapter 6 5 working with Local SIM For each GSM port there is a local SIM This SIM in on the GSM card and can work only with that GSM port There are two basic modes of working with the local SIM active by default or work by timetable Local SIM active by default In this mode the local SIM will register in the cellular network automatically when inserted in the SIM socket 1 Open the ports window 2 Onthe left side there is a list of all the ports select General 3 Set the Default SIM parameter to Enable 4 Insert the SIMs to the GSM port s local SIM sockets 5 Open the Monitor to view the status of the cellular ports Local SIM works by timetable In this mode the local SIM will register in the cellular network according to the timetable 1 SON PWN pa 10 Open the ports window At the left side you will see list of all the ports select General Set the Default SIM parameter to Disable Select a GSM port from the list at the left Open the timetable for that port Select L1 from the Available SI
10. not saved on the Gateway So if you connect from another PC it will not automatically appear Chapter 3 11 Assigning a SIM to Work in a Port at a Specific Time On the Available SIMs list the local SIM L1 and all the SIMs from the SIM Servers are visible Each SIM Server SIM listing contains its location on the SIM Server and its IMSI number To assign a SIM to work at a specific time 1 Goto the Ports window 2 Select a port from the list of the ports on the left 3 Open the Time Table tab 4 Inthe Type category select the form of the timetable monthly or weekly 5 Inthe Swapping Type category select time table 6 Select a SIM from the list of available SIMs at the top 7 The top row of the Timetable represents dates and the left column represents hours 8 Each time slot is for a period of one hour 9 Left click will select the SIM for this time slot and mark it with it s corresponding number 10 You can mark a range of time by dragging the mouse while holding the left click 11 Toun select time slots simply click on it again 12 You are unable to choose a SIM that is already in use at that time in another port on the Gateway 13 After setting all the needed SIMs press Save 14 After setting the needed changes on all the ports press apply to activate VoIP All Series 4 Channel Gateway User Manual 16 2009 DTT VoIP2All USER MANUAL SIM Swapping Limitation Time Slo
11. on the left Press the Prefixes tab to see the prefix table of the port When a dialed number starts with one of the prefixes in the list the call will automatically route to this port If the prefix of a port is then all the calls that do not conform to the other port s will be routed through this port If two or more ports have the same prefix then the gateway will rotate calls between the ports 5 In the Remove Prefix box select how many digits to remove from the beginning of the dialed number 6 In the Add Prefix box enter the digits to be added at the beginning of the number 7 Press Save to activate all changes Chapter 3 7 Dialing Dialing from a mobile phone to a VoIP extension To call a VoIP extension from a mobile phone through Port 1 with the default prefix settings Dial the number of the SIM card in port 1 Hear a dial tone Dial 9 plus the VoIP extension number 9 is the default prefix setting for VoIP i e 9100 when 100 is the voip extension The call will route to the VoIP extension Dialing from a VoIP extension to a mobile phone To call from a VoIP extension to mobile phone with the default prefix settings Pick up the VoIP extension and hear a dial tone Dial the GSM mobile number The call will route to Mobile phone through the first available cellular port Note If the mobile number start with 9 then you must setup the prefix of the VoIP to a different number otherwi
12. package version Dear Customer We thank you for purchasing DTT s VoIP ALL Gateway All our products are developed and produced by experienced engineers who aspire to achieve customer satisfaction utility value and reliability of products The information in this manual has been compiled and checked for accuracy by DTT It however does not constitute as a warranty of performance We hope you enjoy our product and always appreciate any comments you may have This will VoIP2All Series 4 Channel Gateway User Manual 2 2009 DTT VoIP2AIl USER MANUAL enable us to improve our products and our personal service and technical support that strive to provide for every customer Warranty Policy Discovery Telecom Technologies Ltd DTT guarantees its products against defects in materials and workmanship for a period of 24 months from date of purchase Any damage caused by external causes including problems with electrical power servicing not authorized by DTT negligent installation or operation failure to follow documented procedures abuse or general misuse of the product is not covered by the warranty Custom configured products are nonrefundable DTT makes no express warranties except those stated in this paragraph and in the applicable warranty statements for specific products in effect on the date of invoice To request warranty service you must call DTT 1801 7900348 e mail info dtt tw or complete the online RMA Req
13. page of your SIP phone Set up the account with these parameters The SIP Server IP Address is the IP address of the Gateway e The SIP User ID is the chosen number for this extension e The Authentication Password you can leave empty Save the registration settings Register with the new account In the VoIP ALL open the SIP Status window and see that the SIP phone registered Registering in the SIP Server with authentication 1 2 3 4 5 Open the SIP tab Mark the Authentication check box Press Save Open the Users window Add a new user with this account information The VoIP Num is the chosen extension number for this user The Secret is the chosen authentication password for this user e The ID should be set to an empty one VoIP2All Series 4 Channel Gateway User Manual 19 e The rest of the parameters are not relevant and should be set to o 6 Open the configuration page of your SIP phone Set up the registration with this parameters The SIP Server IP Address is the IP address of the Gateway The SIP User ID is the VoIP Num of the user The Authentication Password is the Secret of the user Save the registration settings Register with the new account 10 In the VoIP ALL open the SIP Status window and see that the SIP phone registered Connecting an External IP PBX to the VoIP ALL To receive calls from an IP PBX or any SIP Server you need to
14. the LAN System Configuration Use the LAN connection and VoIP ALL Management MS Windows application You can use this method for later day to day management for monitoring and reports of the VoIP ALL activity The gateway system via IP is highly recommended as you can have the management done remotely from the system via internet connection VoIP2All Series 4 Channel Gateway User Manual 5 Check Your Package Items Please verify that your package contains the following components before installation e Main Hardware Device The VoIP ALL Gateway 110 220V 50 60Hz Power Supply e Software Installation CD Gateway Manager CD for MS Windows Management Application Includes the User Manual file and additional auxiliary utilities e GSM Antenna e LAN Connection Cable e TCP IP Cross Cable Red Cable Facilitates gateway connection directly to the PC Network Interface Card e RS 232 Serial PC Comport connection cable RJ 45 to RS 232 COM Facilitates debugging and direct access to the configuration files Will be referred as Com Cable in this manual e Quick Installation Guide for brief installation explanations VoIP2All Series 4 Channel Gateway User Manual 6 2009 DTT VoIP2All USER MANUAL The 4 Channel VoIP ALL Gateway Solution Overview The 4 Channel VoIP ALL gateway that will be referred as the VoIP ALL in short can connect VoIP calls to cellular networks CDMA GSM UMTS The VoIP ALL has a built in SIP
15. 39 VoIP All Series 4 Channel Gateway User Manual 20 2009 DTT VoIP2All USER MANUAL e Setup the Remove Prefix to the number of digits You wish to remove 2 digits e Dial from the PBX the number 390545555555 e The call will now be routed through this port to the mobile phone by removing the prefix 39 and calling the desired cellular number 0545555555 Chapter 4 3 Tone Levels In the window below the user may set the tone for each port Rx is the tone of the speaker and Tx is the tone of the microphone Press the Tone tab to see Adjusting the Levels 1 Click the blank area on the right side of the tone bar in the grey blank area a slider will appear Adjust the slider to the desired level From 30dbm to 30dbm 2 Repeat this action for all the tones you wish to adjust 3 Press Save to activate and save all changes Chapter 4 4 SIP Servers In the window below the user may control the SIP Server settings Press the SIP tab to access the window below VoIP2All Series 4 Channel Gateway User Manual 21 YoIP 2ALL System ver 4 0 IP 192 168 0 48 2007 Ses Eag Disconnect Voip System Call Report Users Ports Virtual SIM Debug Monitor Exit Gateway Time 11 00 36 17 09 2009 Gateway ESH 1234 SIP Status Hosts SIP Port 5060 RTP Start Port Name IP Port User Secret Register Status 5066 1 Hosti 192 168 0 69 5060 100 111 V Reg RFC2833 Payload Type 101 2 Register Retry STUN Enabl
16. After that time the VoIP ALL will close the voice channel e Last Digit Timeout The time in seconds the VoIP ALL will wait between the last digit dialed and the calling of that number e No Replay Timeout The number of seconds with no answer the Gateway will wait before calling the next number In Priority or Cyclic mode e DISA Is the number of seconds each DISA number will stay in memory e Debug Level Is the amount of detail to be shown on the Debug Screen This level usually should be set at 2 so the Gateway will not send unnecessary debug lines to PC software e When done setting press Save to activate all the changes e Restart Call When enabled allows consecutive VoIP calls Before the end of a call from the GSM to VoIP press to receive a dial tone that enables you to call another VoIP number Changing the IP Address of the Gateway The VoIP ALL Gateway is connected to the net via one IP Address allotted to 3 Ports 2007 Gateway s IP Port 2008 SIMs Port and 2009 Internal SIM Server Port Changing the VoIP ALL s IP address will change the IP address for the Gateway and the internal SIM Server T NY OAU AUY N Connect to the VoIP ALL Gateway with the current IP address port 2007 Open the VoIP window select the General tab Inthe IP Address box enter the new IP address for the Gateway If needed set up the Default Gateway and the Subnet Mask
17. COM is not in use The com connection is not essential for day to day use VoIP2All Series 4 Channel Gateway User Manual 9 Chapter 2 Installing the Manager Application Before operation configuration settings must be applied to the VoIP ALL Gateway Configuration is done on an auxiliary computer by using the VolIP ALL Management MS Windows Application provided for MS Windows operating system Chapter 2 1 Install the VolP ALL Management Software on a MS Windows PC 1 Insert the VoIP ALL Management Installation CD into the CD drive of the PC 2 Through MS Explorer navigate to the installation CD drive 3 Double click setup exe to install the Management Application 4 Click Next 5 The Setup Type window will open 6 Select Complete and click next 7 Click Install The VoIP ALL Management application installs itself Wait until a Completion message appears Chapter 3 The VoIP ALL Basic Operations After installing the Management application launch the program from the icon located on your desktop VoIP2All exe to define the connection between the PC and the VoIP ALL described below s z Launch the VoIP ALL Management by pressing baasocee On your PC desktop or a Start gt Programs gt DTT gt VoIP ALL Management The VoIP ALL management application window should now open pictured below YoIP2ALL System ver 4 0 IP 192 168 0 48 2007 Sl S Vid Disconnect ip System Cal
18. Discovery Telecom Technologies VoIP All Series 4 Channel Gateway Utilize VoIP to connect directly to GSM I CDMA I UMTS cellular networks For additional assistance please contact us DISCOVERY Tel 1801 7900348 7495 7907870 Skype discoverytelecom Mail info discoverytelecom ru Site www discoverytelecom ru VoIPAll Series 4 Channel Gateway User Manual Usage Warnings High voltage transients surges and other power irregularities can cause extensive damage to your device It is the user s responsibility to provide a power protection system It is the user s responsibility to install operate and maintain the system in according to all local and internationally applicable codes reaulations and safety measures Trademarks and Patents Copyright 1997 2009 Discovery Telecom Ltd All rights reserved The reuse or reproduction of any of the information design or layout contained in this manual or in our web site without the permission of DTT Ltd is prohibited All trademarks patents and copyrights apply General Notes Without a notice and without obligation the contents of this manual may be revised to incorporate changes and improvements Every effort has been made to ensure that the information is complete and accurate at the time of publication Nevertheless DTT cannot be held responsible for errors or omissions The screen snapshots in this manual may have older version labels than your delivered
19. I Sending Send line ends with line feeds C Echo ped characters locally Line delay O milliseconds Character delay o milliseconds ASCII Receiving O Append line feeds to incoming line ends L Force incoming data to 77 bit ASCII Wrap lines that exceed terminal width 6 Sett this settings and press OK 7 Press Connect in the Hyper Terminal 8 When restarting the Gateway you will see the initialization process Wait until it finished 9 Press the Enter button On screen you will see 10 Toseethe IP settings write the command ifconfig and press Enter 11 On screen the window below will appear F COM44 HyperTerminal Fie Edit View Cal Transfer Help Ce S amp S ef i321x_PCMStop i321x _RingStop mtSTAHDBY calling ProSLIC_PCMNStop and ProSLIC_RingStop on on channel channel A Si321 _PCMStop 1321 _HingStop FHOK change channel state to off FHOK change ch annel state to on FHOK change channel state to off FROK change ch annel state to on Bus yBoxu vi 2 2 28008 02 26 609 2 22 6008 gt Built in shell tash gt Enter help for a list of built in commands H ifconfig eswh bink encap Ethernet oe He oR oP B44 CHa inet addr 18 16 2 245 P8168 255 255 255 Mask 255 255 255 8 T EROH RUMP T Bic H MTU 15600 Metric i RH packets 3745 errors 4 dropped 60 overruns 6 frame 6 TH packets 3766 errors 60 dropped 60 overruns 4 carrier collisions txqueuelen i10H4 RA bytes 492876 481
20. Ms list Select at the timetable the hour at the left and the day at the top the local SIM will work at Mark that time slot at the timetable Insert the SIMs to the GSM ports local SIM sockets At the defined time the local SIM will register in the cellular Chapter 7 SIM Server VoIP2All Series 4 Channel Gateway User Manual 30 2009 DTT VoIP2All USER MANUAL The VoIP ALL Gateway can connect to SIMs in both the internal and external SIM Servers An external SIM Server could be a SIM Server unit or another Gateway with a SIM Server program When the Gateway needs to register SIMs from the SIM Server it will connect to the SIM Server with port 2009 and will request the data of the SIM All the information will be passed through port 2008 The duration of the connection between the Gateway and the SIM Server is limited to the time that the Gateway is registered with a SIM from the SIM Server When the SIM server is operating behind a firewall ports 2008 and 2009 should be open for the operation of the SIM server Port 2007 should be open for remote access with the PC The Gateway can connect to SIMs of 16 of SIM Servers at the same time The SIM Server can connect to 100 Gateways at the same time Open the Virtual SIM window SIM Servers Setting SIM Servers List C Sim Server 48 Save List Clear List a st IP Address SCAN Delete gt SIMO 192 168 0 48 2009 SCAN delete Recharge Value Bill Interval Units Per I
21. Press Save Disconnect from the Gateway Restart the Gateway wait 30 seconds for initialization connect with new IP address Chapter 4 2 Internal SIP Server The Gateway has an internal SIP Server that can register up to 32 SIP clients These SIP clients can be VoIP phones or SIP Servers In the window below a list of all the SIP Accounts that are registered in the SIP Server is available Press the Sip Status tab to access Press Refresh to monitor the SIP accounts that are registered in the VoIP ALL Gateway VoIP All Series 4 Channel Gateway User Manual 18 2009 DTT VoIP2All USER MANUAL Users count 2 useri userName i userIP 1 12410 16 2 34 10 16 2 34 126 10 16 2 253 10 16 2 253 e The User ID is an identification number in the Sip Server for this account The User Name is the sip account number The User IP is the IP Address of this sip account Working with VoIP ALL Internal SIP Server There are two ways of registering a SIP client in the Gateway internal SIP Server registering with authentication password or registering without authentication password When you are registering the users with authentication password you need to work with the Users list A user that wants to register in the SIP Server will have to be registered with the VoIP number and the password that was preset in his user account Registering in the SIP Server without authentication 1 2 Open the configuration
22. Priority MODE except that each call will begin in the next number on the list Press Save to activate all the changes Note After you finished dialing press to dial the number as it is without waiting the Last Digit Timeout Dialing Examples Dialing from a GSM to a VoIP extension To call a VoIP extension from a GSM mobile phone through the GSM Port 1 with the default prefix settings e Dial the number of the SIM card in port 1 e Hear a dial tone e Dial 9 the prefix for VoIP in this setting and the VoIP extension number e Dial to send the number Dialing from a VoIP extension to a GSM mobile phone To call from a VoIP extension to GSM mobile phone with the default prefix settings e Pick up the VoIP extension and hear a dial tone e Dial the GSM mobile number e Dial to send the number e The call will route through one of the GSM ports Chapter 6 4 Local SIM Settings The local SIM is the SIM on slave board To each Local SIM you can set up is own settings The settings will take effect when the local SIM registers on the GSM Network e PIN Code The PIN Code for the SIM when the SIM is PIN Code protected e CLIR Show or Hide the number of the SIM e NetID Locking the SIM ona specific network e BCCH Locking the SIM on a specific BCCH When empty it will lock on the best reception BCCH e BCCHrssi The minimum reception for rotation e BCCH Timer This function rotates the BCCH The rotation
23. SIM Server program When the Gateway needs to register a SIM from the SIM Server it will connect to the SIM Server with port 2009 and will request the data of that SIM All the information will be passed through port 2008 VoIP2All Series 4 Channel Gateway User Manual 15 The connection between the Gateway and the SIM Server is limited to the time that the Gateway is registered with a SIM from the SIM Server When the SIM server is operating behind a firewall ports 2008 and 2009 should be open for the operation of the SIM server Port 2007 should be open for remote access with the PC The Gateway may connect to an unlimited amount of SIMs in the SIM Server To view the SIM s that are in the SIM server Add the SIM Server to the SIM Servers List Viewing the SIM s in a SIM Server 1 Goto the SIM Servers List 2 Enter the IP address of the SIM Server 3 Enter the port of the SIM Server the default port for a VoIP ALL SIM Server is 2009 4 Press the Save List button Press the Synchronization button The gateway will connect to all SIM Servers and will read all the SIM lists In the SIM Server Setting list you will see all the SIMs from the SIM Servers The list is arranged accordingly to SIM servers Each SIM Server has cards starting from card to card8 Each card has the SIMs from 1 to 32 according to their location on the card Note These tables are saved in the PC software files only it is
24. assword A password is required to connect the Gateway with the PC software By default the password is admin To change the password 1 Enter the current password in Current Password 2 Enter the new password in New Password 3 4 Press Update Password Enter the new password also in Confirm Password Chapter 5 2 FXO Settings In the window below the user may define the settings of the different tones in the Gateway Press the FXO to access the window below Seiing el Current Country Pomo POLAND Dial Tone Disconnect Tone Ringing Tone gt Canada Dial Tone Disconnect Tone w Ringing Tome Brazil Dial Tone Disconnect Tone Ringing Tone You can edit the current country settings or add a new country with new parameters Adding a New Country to the List 1 1 In the Country Name box enter the name of the country you want to add 2 Press Add BF 4 Press on the sign to the left of Dial Tone to open the Dial Tone settings of the country The new country will appear on the list For each parameter enter the country s PSTN settings Do the same for the Disconnect Tone and Ringing Tone Press Save Changing the Current Country 1 2 From the list select the Current Country for the FXO settings Press Save Note You must restart the Gateway to activate the settings Removing a Count
25. ce Callback The Callback feature is a way for the user to make the Gateway call the user back and bill the call at the expense of the SIM 1 Change the Capabilities value to 8 to enable the Callback for the user 2 When a call comes from the GSM number of the user the Gateway will disconnect the call and call him back 3 The user will get a dial tone to make a call Note The Gateway will make a callback to the user s GSM number Verify that the prefix of this number is on the prefixes table and the Remove Prefix box beside if it isn t checked VoIP2All Series 4 Channel Gateway User Manual 34 2009 DTT VoIP2All USER MANUAL Chapter 9 Monitoring Calls 1 To monitor calls press LX JThe monitor screen opens Gateway Monitor The SIM indicator shows the status of the SIM see below The Net indicator shows the status of the SIM registration in the GSM network see below The SIM indicates the number of the active SIM 1 is local SIM 2 is SIM Server SIM The number at the top left indicates the GSM reception level The Net ID indicates the ID number of the GSM network The BCCH indicates the number of the Broadcast Channel Dm fF W N B The Net and SIM indicator s States e A red indicator indicates there is no connection e A yellow indicator indicates there is a connection but no data transfer e Agreen indicator indicates transfer of data Point the mouse on the blue triangle at th
26. dd anew Host to the list with the SIP account information The Name is the chosen name for this host connection The IP Address is the SIP Server IP address or name you want to register with The Port is the number of the SIP Server port the Default is 5060 The User is the user number or name The Secret is the SIP account password when working with authentication The Register box leave empty so it will not register in the SIP 4 Click on the next line in the table and then press Save 5 Press Refresh the Status will show Reg 6 Goto the Prefixes window and define a prefix for this Host Dialing to the IP PBX To call from a GSM mobile phone through Gateway to extension in the IP PBX Go to the Ports window From the ports list select this Host Setup the prefix of the host to the prefix of the PBX extensions i e if all the PBX extensions start with the digit 1 then the prefix of the host will be 1 Setup the Remove Prefix to o Dial the number of the SIM card in port 1 Hear a dial tone Dial the PBX extension number The Gateway will recognize the prefix of the Host i e 1 and the call will be routed to the IP PBX Chapter 4 5 IP Restrictions VoIP2All Series 4 Channel Gateway User Manual 23 Use this window to restrict the Gateway to work only with a specific range of SIP IP addresses There are two restrictions tables Enable IPs and Deny IPs When the IP addres
27. e Disable i 3478 75 101 138 1 Codec 1 67238000 Codec 2 67298000 Codec 3 Pcmag000 Auhentication i Codec 4 pcmusooo Realm feurotech Register Hosts H d j gt a Connected 11 00 36 17 09 2009 Internal SIP Server Settings Delete delete delete delete delete delete delete delete delete delete e Codec Priority Define Codec 1 Codec 4 the priority of the Codec that the SIP Server will use when connecting VoIP calls The codec that will be used is first one from the list that both of the VoIP phone can work with e SIP Port Is the TCP port of the SIP Server e RTP Start Port Is the first port of the range of ports of the SIP RTP ports Usually the ranges of ports that the SIP uses are from 5060 to 5100 e RFC2833 Payload Type Is the type of payload to be used by the SIP e Authentication When enabled requires a password to register the VoIP ALL internal SIP Server e Realm Is the name of the SIP Server realm of operation Hosts Connecting the VoIP ALL to an External IP PBX To call from the Gateway to IP PBX or any SIP Server you need to connect the Gateway to the IP PBX SIP Server There are two ways to connect to the external SIP registering the Gateway in the external SIP or working without registration Registering the Gateway in external SIP Server You can connect the VoIP ALL s internal SIP Server to a
28. e bottom right and right click A menu will appear Refresh port Get data from the ports Reset Port Reset the ports GSM port1 and GSM portz2 Port Control Open the Port Control window Chapter 9 1 Port Control Window This window controls the GSM port settings VoIP All Series 4 Channel Gateway User Manual 35 aAA r z m como _Sendss J Smene Module Status OPER Refresh MSI Number 425010101225952 IMEI Number 3553300001184404 Caller ID E y network T SIM Mumber SiM ka Operator ID 1 999999 0 Any fo Auto BECH Lock C BECH Lock 1 251 15121023 _BCCH Control BECH Random RSSI select from list IT ab j Timer 30 65535 sec fs Save Connect Hetwork Disconnect Network Monitor the Status of the port Monitor the IMSI number of the SIM that is registered in the port Monitor the IMEI number of the port Press the BCCH Control button to monitor the BCCH cells MET 42502 BSI 26 BCH 559 LAC 2603 LAC 2805 Cl 104E Cl Car Moc 42502 co Moc 42502 BSI 35 rE BS 13 BccH Sar Ea Aol 610 RSSI 96 db CAE eee RSSI 61 db Cl 1DF8 MEC 42502 LAC 20503 LAC 2603 cl 1040 5 cl 1DF9 Mec 2502 QoS rodh Mec 42502 BSIC 4 BSIC 61 BolH 607 RSSI 95 dhy BCCH B08 RSSI 50 db MEC 42502 ASI 12 BccH 603 RSSI 91 db 1 The middle cell is the cell that the SIM is connected to 2 Ar
29. e the SMS message in the Message box Enter the number to send the SMS in the Phone Number Press the Send button Receiving SMS 1 When SMS will arrive from the GSM network an icon envelope will appear in the monitor oa Gateway Monitor FBdb NetID 42602 BCCH socso fbdb E sintready 1 Ars Eran sim SMA VolP AII Series 4 Channel Gateway User Manual 37 2 To see the messages open the SMS Inbox tab in the Port Control window Port 1 Contig Sendsms Sender 972525974960 SMSC 972521100059 Time 12 11 2008 14 27 44 SMS Count 1 3 Press Delete to deletes the massages 4 Press the Font button to select a different font 5 Press the Save button to save the messages Appendix A Com Port The Com Port connection give you direct access to the Linux based operating system files of the DSP 1 Connect the Com Cable from the Gateway to the PC RS232 COM Port 2 Connect the Hyper Terminal press Disconnect than Properties 3 Inthe Connect To tab press Configure The Port Setting should be COM1 Properties Port Settings Bits per second EE 5200 E Data bits 8 Parity Stop bits Flow control Restore Defaults 4 Press OK and move to the Settings tab 5 Press ASCII Setup VolP AII Series 4 Channel Gateway User Manual 38 2009 DTT VoIP2All USER MANUAL ASCII Setup ASCI
30. ed number starts with this prefix the call will automatically route to this port If the prefix of a port is then all the calls that do not conform to the other ports prefixes will be routed through this port If two or more ports have the same prefix then the Gateway will rotate the calls between the ports In the Remove Prefix select box how many digits to remove from the beginning of the dialed number In the Add Prefix box select the digits to be added at the beginning of the number 4 Inthe Incoming Calls Handle select the operation mode for each port Dial Tone All calls that come from this port will receive a dial tone to call any other port Blocked All calls that come from this port will be blocked The caller will hear a busy tone VoIP2All Series 4 Channel Gateway User Manual 28 2009 DTT VoIP2All USER MANUAL Destination Number All calls that come from this port will automatically route to a number according to the Incoming Calls Destination mode In the Incoming Calls Destination table on right choose the destination number preference Fixed All incoming calls to this port will route to one predefined number Num21 Priority All calls that come from a port in this mode will route to Numa if the number is busy no answer No Replay Timeout doesn t exist the call will route to the next number on the list until there is a answer Cyclic The same as in
31. gateway The number of the mobile phone needs to be sent in the INVITE message of the SIP To set up the dialing from the IP PBX to a GSM mobile phone through the gateway e Dial from the PBX to the gateway e view the Monitor of the gateway check the number that the gateway dialed i e 39 0545555555 e Goto the prefix table of this port e Setup the prefix of this port i e 39 e Setup the Remove Prefix to the number of digits You wish to remove 2 digits e Dial from the PBX the number 390545555555 e The call will now be routed through this port to the mobile phone by removing the prefix 39 and calling the desired cellular number 0545555555 Chapter 3 9 Connecting the Gateway to IP PBX To send calls to the IP PBX or any SIP Server you must register the Gateway in the external SIP Server Registering the Gateway in the external SIP Server VoIP2All Series 4 Channel Gateway User Manual 14 2009 DTT VoIP2All USER MANUAL The VoIP ALL s internal SIP Server can connect to an external SIP Server by adding a host in the Hosts table When the SIP Servers are connected you will be able to make calls from the Gateway to the Host SIP 1 Receive a SIP account from the external SIP Server 2 Open the SIP tab in the VoIP window 3 Add anew Host to the list with the SIP account s information The Name is the chosen name for this host connection The IP Address is the SIP Server IP address or desired regi
32. gister with the new account 5 Via the VoIP ALL PC management open the SIP Status window to see the SIP phone registered Chapter 3 5 Working with a local SIM For each cellular port there is one dedicated local SIM This SIM can work only with that cellular port There are two basic modes of working with the local SIM active by default or work by timetable Setting the Local SIM to be active by default In this mode the local SIM will register in the cellular network automatically when inserted in the SIM socket Open the ports window On the left you will see list of all the ports select General Set the Default SIM parameter to Enable Insert the SIM to the cellular port s local SIM socket PWN B Open the Monitor to view the status of the cellular ports Fig Cellular Port monitor When the SIM is registered correctly the monitor window will change to a light green color and the Net and SIM indicator will change from yellow to green Chapter 3 6 Assigning a Prefix to a Port VoIP2All Series 4 Channel Gateway User Manual 12 2009 DTT VoIP2All USER MANUAL Using the basic setting an incoming call from a port will receive a dial tone The user may then dial anumber the gateway will route the call according to the prefix of the dialed number To assign prefix to a port 1 2 3 4 Enter the Prefixes for this port Open the Ports window Select a port from the list
33. h operation and hope you enjoy greatly saving on your office mobile phone calls This chapter is your map for installation configuration and monitoring tasks and includes a short explanation detailing each stage It also includes references for more elaborated explanations drawings and examples in following chapters The following is a list of recommended tasks Including mandatory and optional tasks that may or may not be required for your current needs It is advised to use the following menu as your check up To Do List Mandatory Check package items delivered in your package Refer to the Check your Package Items chapter to view a list of all items which should be included in your package Installation and Connections O Install SIM Cards O Install Antennas O Install LAN cable Refer to Chapter 1 SIM Cards Installation and Cables Connecting for specific and detailed guidelines Install the PC management application Follow the Quick Installation Guide included in you package to install the MS Windows Management Application on the PC Laptop allocated for the system management Use the provided CD Refer to Chapter 2 Installing the Manager Application for further information The Quick Installation guide is available for download at our website General Configurations In order to operate the system mandatory basic setup steps should be performed by using
34. itaus 30 Chapter 6 5 Working with Local SIM c ccccceeee cece eee eeeeee cece esse eeeae esse esse esse eeseeesaeesaees 30 Chapter 7 SIM Server asec onsecatcstieaa tctesriconane nce cuttan aanmancaniaieein oaaresaaciinameplemnis ony exenadimnoiseaksenauumsgnooste 31 Chapter 7 1 Connecting to SIM Server cccceceeeeeeeeeceeeeeeeecae essa eecaeeesaeeesaaeesaeessaeeeaaees 32 Chapter 7 2 SIM Server SettingS ccccceeeceeeeeeeeeee tesa eeeaeeecaeeesaaeesaaeesae essa eesaeeeaaeeeanees 32 Chapter o Cl ger en en ne ee ee ce eee ee 32 Chapter 8 1 Adding a User x sreseravensapaseraaneonaevaainalane pind ene madmnaerearenwerenmaanuanidetiNamaues 33 Chapter 8 27 User Capabilitel Cee enn ee en ree ee eee 34 Chapter 9 Monitoring Calls ea senmsernnanityctamoresavennteiatdaommateaasneegnevanataaaemonsaaucnieneteseei nace ee tootaiann 35 Chapter 9 1 The Port Control WING OW sesececsecednccadaveawexcencmennacbeiccmetonduddeeiacneteadiandddatieeseess 35 CREG M i sented amet ore E TO eee ctmaa E 37 PSC Fe OP Oi aac tas coat actin co ceenasnmanseannne E E seoneiea pu aate met pni carn tutesiens an aandian 4 0 VoIP2All Series 4 Channel Gateway User Manual 4 2009 DTT VoIP2All USER MANUAL Getting Started The DTT team is glad you have chosen to use the DTT s VoIP ALL Gateway to fulfill your needs We will do our best to make your installation efforts and day to day configuration and monitoring tasks pleasant We wish you smoot
35. l Report Users rts Yirtual SIM Debi Monitor Gateway Time 19 24 31 01 10 2009 Gateway ESH 16106609 system About_ General SIP Status IP Settings IP Address 192 168 0 43 Defualt Gateway 192 168 0 1 Subnet Mask 255 255 0 0 Port 2007 DNS 1 e DNS 2 Dialling Settings Wait for Dialing secs 1 180 21 Last Digit Timeout secs 1 180 4 Debug Level jo No Replay Timeout secs 1 180 hs DELA hours 1 24 jo Restart Call a SAVE Refresh Ea Connected 18 24 31 01 10 2009 Chapter 3 1 Connecting the Management Software to the VoIP ALL VoIP All Series 4 Channel Gateway User Manual 10 2009 DTT VoIP2All USER MANUAL 1 Press in the toolbar The Selected Connection window will open Select Connection Please enter detail for the host that you want to connect Host address 110 16 2 245 gt Port number 2007 default port 2007 E 2 Enter in the Host Address the IP Address of the VoIP ALL Gateway The default IP Address iS 10 16 2 245 as pictured 3 Enter in the Port Number the port of the VoIP ALL gateway The default port is 2007 4 Enter in the Password the password of the VoIP ALL gateway The default password is admin 5 Press OK to connect Note You must wait 30 seconds after connecting the power to the VoIP ALL gateway for the initialization process to end before connecting with the PC Management Note If you can t remember the IP Address see Appendix A
36. lback and DISA to open the Users window Search field lo gt value Search All Users Count 4 ID firstname last name voip number gsm number pstn number capabilities active features Secret Update Delete 1 1 Aslan Laoz 100 0525555555 6801080 0 1 111 update delete 2 2 Mark Adar 101 0526666666 6801081 1 1 222 update delete 3 4 Bel red 102 0527777777 6801082 8 1 333 update delete 4 3 Avi Cohen 103 0528888888 6801083 0 1 444 update delete 5 update delete 6 update delete Fy update delete 8 update delete g update delete 10 update delete 11 update delete 12 update delete 13 update delete 14 update delete 15 update delete ID rr o ooo o pstn number SCS firstname m capabilities o y last name r active features 77 INSERT voipnumber Secret Eoo gsm number Chapter 8 1 Adding a User To add a new user to the list Enter this values and press the Insert button e ID The User number in the list e First Name e LastName e VolP Number e GSM Number e PSTN Number e Capabilities What this user can do e Active Features Not active in this version e Secret The SIP authentication password Note Indicates mandatory fields Updating a Number in the List To update a user 1 Locate the user on the list 2 Update the user number value information VolP AII Series 4 Channel Gateway User Manual 33 3 Press the Update button of the user 4
37. n external SIP Server by adding a host in the Hosts table When the SIP Servers are connected you will be able to make calls from the Gateway to the Host SIP 1 Geta SIP account from the external SIP 2 Open the SIP tab in the VoIP window 3 Add anew Host to the list with the SIP account information e The Name is the chosen name for this host connection VoIP2All Series 4 Channel Gateway User Manual 22 2009 DTT VoIP2All USER MANUAL The IP Address is the SIP Server IP address or name you want to register with The Port is the number of the SIP Server port the Default is 5060 The User is the user number or name The Secret is the authentication password of the SIP account The Register box check it to register in the SIP 4 Click on the next line in the table and then press Save 5 Press the Register Host button to register host in the external SIP Server 6 After few seconds Press Refresh If the registration succeeded the Status will show Reg If registration failed it will show Not Reg 7 Goto the Prefixes window and define a prefix for this Host Working without registration You can connect the VoIP ALL to an external SIP Server without registering When the SIP Servers are connected the gateway will be able to make calls to the SIP Server without registering in it 1 Geta SIP account from the external SIP 2 Open the SIP tab in the VoIP window 3 A
38. nterval Current Balance PIN Code 0 By network Net ID BCCH BCCH timer BCCH rssi SIM1 SIM2 z Synchronization Save Servers 0 0 0 0 Chapter 7 1 Connecting to SIM Server To view the SIMs that are in the SIM server Add the SIM server to the SIM Servers List Viewing the SIMs of the SIM Server 1 Go to the SIM Servers List Enter the IP address of the SIM Server you want to view is SIMs Enter the port of the SIM Server the default port for a VoIP ALL SIM Server is 2009 Press the Save List button Press the Synchronization button The getaway will connect to each SIM Server on the List nF Ww N and will read from him the SIMs list In the SIM Server Setting list you will see all the SIMs from the SIM Servers The list is arranged according to SIM servers Each SIM Server has cards starting from card to card8 Each card has the SIMs from 1 to 32 according to their location on the card These tables are saved in the PC software files only it is not saved on the Gateway So if you connect from another PC it will not automatically appear Chapter 7 2 The SIM Server settings VoIP2All Series 4 Channel Gateway User Manual 31 After pressing the Synchronization button the getaway will read the SIMs list from each SIM Server it is connected to All the SIMs in the SIM Servers will appear at the list The list is arranged according to SIM servers Each SIM Server has card
39. one antenna connection for all 4 ports The card is controled by two programble processors Chapter 1 2 Installing the SIM Cards in the Cellular Cards Insert the SIM cards into the VoIP ALL as follows Each cellular port has 1 local SIM On the bottom of the each cellular port there are labeled slots for the local SIMs Position the SIM in the slots so the SIM metal contacts face upward and the snubbed triangle inwards into the device Gently insert the SIM until you hear a click The SIM is now in place Note To extract the SIMs you need to push and release the SIM the SIM will be released from the switch and then pull it out Chapter 1 3 Connecting the Cables There are two sets of LAN and COM connectors on the master card marked ST1 and ST2 The VoIP ALL currently use only the ST1 connectors in the left ST2 connectors in the right are currently not in use LAN cable The LAN cable is used to connect the system to the internet network Connect the LAN line to the left RJ 45 marked LAN the right RJ 45 marked LAN is not in use Antenna Connect one antenna for all the four channels Position the antennas at least 20 centimeters apart and more then 1 5 meters from the VoIP ALL Power Supply Connect the power supply from your 110 240V 50 60Hz power outlet to the VoIP ALL Gateway power connector Com Cable Connect the Com Cable from the PC RS 232 comport to the left RJ 45 marked COM the right RJ 45 marked
40. ound it are all the surrounding BCCH cells the Gateway is detecting 3 For each cell there is the following information e LAC Location Area Code e Cl Cell ID e MCC Mobile Country Code e BSIC Basic Station Identity Code e BCCH Broadcast Control Channel e RSSI Receiver Signal Strength 4 You can choose a BCCH channel by clicking on the cell The module will automatically register in the new BCCH VoIP2All Series 4 Channel Gateway User Manual 36 2009 DTT VoIP2AIl USER MANUAL 5 You can close the BCCH Control window by clicking on the X button in the middle of the window Chapter 9 2 Sending SMS To send SMS press the Send SMS tab Bet L aem O O Refresh SMS Status READY Format Unicode ucs Right to left Miessage Font gave CharCount 0 70 Split into 1 PDUs Phone Mumber SMSE Mumber 9725211000859 Bulk Mumbers A Send Select in the Format box the format of the SMS Check the Right to Left box when writing in a language from right to left Enter the SMS message in the Message box Press the Font button to select a different font Press the Save button to save the SMS Enter in the Phone Number box the GSM number to send the SMS to In the SMSC Number you see the number of the SMS server Enter in the Bulk Numbers the list of GSM numbers when needed to send to the SMS to many numbers 9 Press the Send button to send the SMS Oo Oe a Ve Sending SMS Writ
41. ours Each time slot is for an hour Left click will select the SIM for this time slot and mark it with it s corresponding number To un select time slots simply click on it again You are unable to choose a SIM that is already in use at that time in the Gateway After setting all the needed SIMs Press Save Press Apply to activate the changes Assigning the SIMs to work for duration of time The calculation of the units per call is Dun Ww Units per call Time of the call Bill Interval Units Per Interval Go to the SIM settings If it is a local SIM it is in the Local SIM Settings tab that in the Ports window If it is a SIM Server SIM it is in the SIM Server Settings in the Virtual SIM window Set this SIM settings e Bill Interval The interval of time in seconds for each unit e Units per Interval The amount of units for each interval e Recharge Type The time to recharge the units If Weekly then at the end of the week the SIM initial units will be set If Monthly then at the end of the month the SIM initial units will be set e Current Balance The total amount of units for the SIM It should be set always higher then o recommended to set it to max 9999 Select a port from the list of the ports in the left In the Type category select the form of the timetable monthly or weekly In the Swapping Type category to work by call duration select call dura
42. ry from the List 1 Press the Remove button of the country you want to delete from the list 2 Press Save VoIP2All Series 4 Channel Gateway User Manual 25 Chapter 6 Port Settings In the window below you are able to define the settings for each port The Cellular ports are marked GSM the VoIP is the port of the internal SIP server and the Hosts are the external SIP Servers you are connected to Open the Ports window A VoIP2ALL System ver 4 0 IP 192 168 0 48 2007 SoS S Nagav Disconnect Voip System Users Ports Virtual SIM Debug Monitor Gateway Time 19 03 09 Gateway ESH 96100048 System About Local SIM Type 48 Port1_List SIMO IMSI 9255020 11077338109 Monthly 48 Port1_List SIM1 IMSI 925502011077336809 48 Port1_List SIM2 IMSI 9255020 11077362809 48 Port1_List SIM3 IMSI 9255020 11077343409 48 Port1_List SIM4 IMSI 9255020 11077356709 Time Table Clear Table Swapping Type Refresh Save Connected 10 49 52 19 03 09 Chapter 6 1 General Settings Select General from the top of the ports list on the left side of the window 1 Default SIM Define when the local SIMs with register e By Default The Local SIM will work on insertion By Time Table The local SIM will work only when set in the time table 2 Clock IP Clock Port Internal Srv Internal Call MNP Timeout are currently not in use Chapter 6 2 Time
43. s called cards starting from card 1 Each card has the SIMs from 1 to 32 according to their location on the card For every SIMs setting may be defined individually PIN Code The PIN Code for the SIM when the SIM is PIN Code protected CLIR Show or Hide the number of the SIM Net ID Locking the SIM on a specific network BCCH Locking the SIM on a specific BCCH When empty it will lock on the best reception BCCH BCCH rssi The minimum reception for rotation BCCH Timer This function rotates the BCCH The rotation is preformed according to the BCCH Timer measured in seconds between all BCCH which have better reception than the BCCH rssi Bill Interval The interval for each unit see Chapter 4 2 1 Units per Interval The units for each interval see Chapter 4 2 1 Current Balance The total amount of units for the SIM See Chapter 4 2 1 Recharge Value Currently not in use This setting will take effect when the SIM will register in the GSM network VoIP2All Series 4 Channel Gateway User Manual 32 2009 DTT VoIP2All USER MANUAL Chapter 8 Users Identification and authorization for each action in the Gateway is done by initially defining users You may define up to 500 users For each user you can define user specific settings The Users list is needed for two basic operations SIP users registration when working with authentication Setting users to work with features Cal
44. s is restricted all the messages from that IP will be blocked You will not be able to call That SIP or to register the SIP The table is for a range of addresses If you need to block only one IP setup the start and the end to the same IP If Enable IPs and Deny IP s are not set All the IPs are enabled Only the Enable IPs is set The IPs in the range will be allowed all other IPs will be denied Only the Deny IPs is set The IPs in the range will be denied all other IPs will be allowed Enable IPs and deny IPs is set The IPs in the range of the Enable IP s will be allowed with the exception of the range of IP s in the Deny IP s Chapter 5 System Setting Press L m _ to set system settings Chapter 5 1 General Setting Press the General tab to set the Clock and the Password Setting the Clock 1 Select in the Date box the date of the VoIP ALL Gateway 2 Enter in the Time box the time of the VoIP ALL Gateway 3 Select in the Date Format display preference Day Month Year or Year Month Day 4 Press Save to change the time and date Restarting the VoIP ALL Gateway To restart the Gateway press the Restart System button This will restart only the DSP with the Linux programs There is another way to restart the DSP press the Reset button on the master card near the LAN connector VoIP2All Series 4 Channel Gateway User Manual 24 2009 DTT VoIP2All USER MANUAL Changing the P
45. se the call will route to the VolP Dialing through a specific port To call a mobile phone through a pre defined specific port Set the Prefix of this port to certain number 6 Set the Remove Prefix to the number of digits in that prefix i e 1 Save the prefixes settings Pick up the VoIP extension and hear a dial tone Dial the prefix i e 6 and the mobile number i e 605555555 when 05555555 is the mobile number VoIP2All Series 4 Channel Gateway User Manual 13 e The call will route through this port Chapter 3 8 Connecting IP PBX to the Gateway To receive calls from IP PBX or any external SIP Server you need to register the IP PBX in the VoIP ALL gateway internal SIP Server Registering external SIP Server in the gateway internal SIP Server The registration is performed in the external SIP Server configuration The procedure is the same as in registering with VoIP Phone see Chapter 3 4 Internal SIP Server 1 Open the SIP Registration in the external SIP Server or IP PBX 2 Setup the registration with these parameters e The SIP Server IP Address the IP address of the gateway e The SIP User ID the chosen number for this extension The Authentication Password when working with authentication 3 Save the registration settings 4 Register the new account Verify the registration by checking the sip status window Dialing from the IP PBX When calling from an IP PBX to cellular via the
46. ssssssrssrrserrerrerrerrerrsrrerrsrrrerrerr 15 Chapter 3 10 Connecting to SIM Server sssssssssssssosrssrrrsrrrrrrrrrrerrrsretrrrsrrrrnrrsrerrresrnrne 16 Chapter 3 11 Assigning a SIM to work at a specific tiMe ssssssesssssrsssrresrrrerrrrerrrerrrerrne 17 Chaptra VolP CRNO gee eee ee e e E ee re oe 18 Chapter 4 1 General Settings srreuenirnrnie e aN NNa a 18 Chapter 4 2 rer ial GIP SEVE ecnsetaeai e E 19 Chapter 4 3 Tones Levels ee en ee nr a ee ee 21 Chapter 4 4 SIP Server Settings gi vessateecan ac atenniant R ssn ea crtauntusaeemadenerambnn 22 Chapters PIR OS UICE OS ac oasse acters ees asnnoecmne cannes ow ucle asennad uncteuseeneesansonsesuaneataunsuancde 24 Eee aN e E AS e E A A E A E T A maton 24 Chapter 5 1 General Settings sssssesnsenssenrersrrrrsrrrsrrorrrsrrtrersrerrrrsrerrntrrrrrnrrsrerrres trtne 24 Chapter r a FAE e aces ae cae ne wt peters meal set etna roneo a ese oes 25 Chapters 3 Calla 1010 g hoe eee Te err eT er eer ern er eee eee 26 Chapter GP OSC UI See cee retecctsne citaitaearcseecn semis asa A eOe ASEA EERE ERE TETEE 26 Chapter 6 1 Cla gi lge ol 185 ar a eee nee ee ee 26 Chapter 6 2 Time PAIS cagnc carinarin cepa mosnen sonar rae caimayaberneacmnamanaanmaaemnraneyenasenmnnnt 27 ie Oe Ge PS SS ceca tae evens ccemnaeta ea saenmen arena eneveesanan ruse onan ian tia agearenelorcdriceacieeorsen 28 Chapter 6 4 Local SIM Settings scassenszensveostsesaianqatenarcuasvanenentyeoneeeeunzest shanteaaeritaemnne
47. stration name The Port is the number of the SIP Server port the default is 5060 The User is the user number or name The Secret is the authentication password of the SIP account The Register box check it to register in the SIP 4 Click on the next line in the table and press Save 5 Press the Register Host button to register the host in the external SIP Server 6 After a few seconds Press Refresh If the registration succeeded the Status will show Req If registration failed it will show Not Reg 7 Goto the Prefixes window and define a prefix for this host Dialing to the IP PBX To call from a GSM mobile phone through Gateway to extension in the IP PBX Go to the Ports window From the ports list select this Host Setup the prefix of the host to the prefix of the PBX extensions i e if all the PBX extensions start with the digit 1 then the prefix of the host will be 1 Setup the Remove Prefix to o Dial the number of the SIM card in port 1 Hear a dial tone Dial the PBX extension number The Gateway will recognize the prefix of the Host i e 1 and the call will be routed to the IP PBX Chapter 3 10 Connecting to a SIM Server The connection to the SIM Servers is done via the Virtual SIM window The VoIP ALL Gateway can connect to SIMs in both the internal and external SIM Servers An external SIM Server could be a SIM Server unit or another Gateway with a
48. t is a continuous time slot for a SIM to work in the timetable There is a firmware limitation of 30 Time Slots for each port Chapter 4 VoIP Settings a D Press to open the VoIP setup window Chapter 4 1 General Settings Press the General tab to see General SIF Status AP Settings IP Address 192 168 0 48 Gateway 192 168 0 1 Subnet Mask 255 255 0 0 Port 2o07 Dial Settings Wait for Dialing secs 200 Last Digit Timeout secs p Debug Level Ho Replay Timeout DELA seconds IP Settings e IP Address Is the IP address of the Gateway By default it is 10 16 2 245 e Default Gateway When working behind a firewall you must setup Default Gateway for the Gateway to be able to access the WAN usually it Is the IP address of the Router that the Gateway work behind e Subnet Mask When working behind a firewall you must setup Subnet Mask e Port IP port of the VoIP ALL Used for connecting with the PC management Default setting it is 2007 e DNS When working behind a firewall if you need to connect to a external SIP Server with a name not IP address then you must setup the DNS usually it Is the IP address of the Router that the Gateway work behind Dialing Settings VoIP2All Series 4 Channel Gateway User Manual 17 e Wait for Dialing The time in seconds from the start of the dial tone the VoIP ALL will wait for the first digit to be dialed
49. tion Select a SIM from the list of available SIMs at the top The list is organized by the SIM Servers L1 at the top of the list is the onboard SIM on the SLAVE card The row of the timetable represents dates and the column the order on the list VoIP2All Series 4 Channel Gateway User Manual 27 Q 10 11 12 13 14 15 Left click will select the SIM for this time slot and mark it with a number A dialog box will open Enter the units for this SIM The current count of the units of the SIM will appear in brackets To un select time slots simply click on it again You are unable to choose a SIM that is already in use at that time in the Gateway After setting all the needed SIMs press Save Press Apply to activate the changes At the end of each call the unit count is updated When the unit count reaches zero 0 the port will register the next SIM on the list Chapter 6 3 Prefixes Under the default setting an incoming call from a port will receive a dial tone The Gateway will route the call according to the prefix of the dialed number Each port has a ten prefixes table Press the Prefixes tab to see Time Table Prefixes LocalSIM Incoming Calls Handle Dial Tone RERE i Add Frefis rlnacoming Calls Destination Type Priority Hum 1 Hum 2 Hum 3 Num 4 Hum 5 Num 6 1 2 3 4 5 5 T a g 0 1 Refresh SAVE Enter the Prefixes for this port When a dial
50. uest form within the warranty period with a description of the problem If warranty service is required DTT will issue a Return Material Authorization RMA Number You must ship the defective product back to DTT during the warranty period in its original or equivalent packaging prepay shipping charges and insure the shipment or accept the risk of loss or damage during shipment DTT will ship the repaired or replacement products to you DTT reserves the right to modify its warranty at any time in its sole discretion All software is provided subject to the license agreement that is part of the package Customer agrees that it will be bound by the license agreement once the package is opened or its seal is broken DTT does not warrant any software under this Agreement Warranties if any for software are contained in the license agreement that governs its purchase and use Table of Contents IST Ce UO tasers gers eas eee tg se octeeeg une ic cache erases teacetmacen E op cactacoeataessettant tease 6 Check Your Package emis ee ce ee ee ee ee ee ee 7 The 4 Channel VoIP2ALL Gateway Solution Overview cccccccceeeeeeeeeeeeeeeeae esse esse eeseeeeaeeeaeeeaes 8 Chapter a Installing SIM Cards and Connecting the Cables ccccceeeeeeeeeeeeeeeeeeeeeaeeeeaeeeeaeees 9 Chapter 1 1 Hardware overview scipetssansannsaaydarncd sn ecmnysaisidasdansdenmuiaiipoainrainadaatenasoorntasens 9 Chapter 1 2 Installing the SIM Cards in a Cellolar Card

4 ch_voip2all_manual_eng_v2 2

Contents

Download Pdf Manuals

Related Search

Related Contents