USER MANUAL MAD DOG DRAG BRAKE
Contents
1. MMDB 00160 22 Hooker Screw Set Screw MMDB 00350 23 Hooker Screw MMDB 00170 Not pictured Drum eu E NOE Sea Ee xU M CEN EET TEESE SN MMDB 00010 Special Wrench MMDB 00037 Copyright Maddock Machine2015 All rights reserved Reproduction of the contents of this manual in any form or by any means is prohibited without the written permission of the copyright owners 14 WARRANTY PRODUCT MUST BE REGISTERED WITH MANUFACTURER WITHIN THIRTY 30 DAYS OF PURCHASE THE MAD DOG DRAG BRAKE AND THE MM 3 125 DRAG BRAKE BRAKE ARE WARRANTED TO THE ORIGINAL REGISTERED OWNER AGAINST DEFECTS IN MATERIAL AND WORKMANSHIP FOR THE LIFE OF THE BRAKE THIS WARRANTY AGAINST DEFECTS IN MATERIALS AND WORKMANSHIP IS LIMITED TO AT THE COMPANY S OPTION THE REPLACEMENT OR REPAIR OF ANY DEFECTIVE PARTS OR MATERIALS THIS WARRANTY TO REPLACE OR REPAIR IS CONDITIONED ON THE FOLLOWING 1 Registration of the product with Manufacturer within thirty 30 days of purchase 2 Reasonable opportunity by the Manufacturer to inspect for defects 3 The Brake having not been subjected to misuse negligence or accident and 4 The Brake having not been altered or modified EXCLUSION OF W2. Sn Copyright Maddock Machine2015 All rights reserved Reproduction of the contents of this manual in any form or by any means is prohibited without the written permission of the copyright owners 11 Drawing num 5 Reaction Arm amp Bolt head clearance with Pacman Reaction Arm Bolt head L clearance here Drawing num 6 Cable lenth measurment Hooker Screw placement Cable cut Align here Push here Copyright Maddock Machine2015 All rights reserved Reproduction of the contents of this manual in any form or by any means is prohibited without the written permission of the copyright owners 12 Drawing num 7 Hooker Screw extention O P 0 23 5 94 Maximum extention DO NOT EXCEDE THIS LENTH Copyright Maddock Machine2015 All rights reserved 13 Reproduction of the contents of this manual in any form or by any means is prohibited without the written permission of the copyright owners PARTS LIST from drawings num amp 2 page 10 NUMBER FROM DRAWING MADDOCK MACHINE PART NUMBER 1 Shoe stop onan nnn MMDB 00370 2 Spring inanin MMDB 00190 3 Outer Plate MMDB 00030 A Shog eme nner aaa MMDB 00200 5 10mm 12mm Bushing
3. MMDB 00320 6 Reaction Arm Bushing Screw MMDB 00060 7 Reaction ArmM MMDB 00040 8 Reaction Arm Anchor Bolt Nut MMDB 00260 9 Cam Pad MMDB 00220 10 Cam Bushing Screw MMDB 00300 ea a a MMDB 00080 12 Cam Bushing Nut MMDB 00120 13 Actuation Arm MMDB 00130 14 Reaction Arm Anchor Bolt MMDB 00250 15 Actuation Arm Washer MMDB 00330 16 Actuation Arm Screw MMDB 00140 17 Reaction Arm Bushing MMDB 00050 18 Shoe Stop ScreWw MMDB 00280 19 Shoe Stop Washer MMDB 00290 20 Hooker Pin MMDB 00310 21 Hooker
4. TERMS AND CONVENTIONS A CAUTION DENOTES AN ACTION THAT MAY POSE A RISK OF OR RESULT IN DAMAGE TO EQUIPMENT WARNING A WARNING DESCRIBES ANY ACTION THAT MAY POTENTIALLY RESULT IN INJURY OR DEATH SECTION 1 THE MAD DOG DRAG BRAKE AND THE MM 4 125 DRAG BRAKE HENCEFORTH REFERRD TO AS THE BRAKE IS A SECONDARY BRAKE DESIGNED SPECIFICALLY FOR THE USE OF HELPING TO CONTROL THE DOWNHILL SPEED OF A BICYCLE THE BRAKE IS NOT INTENDED FOR USE AS A STOPPING BRAKE AND MUST NOT BE USED FOR THAT PURPOSE 1 Drum threaded 1 37x24 tpi ISO bike 2 Outer plate 3 Shims 1 each of Imm amp 5mm 4 Operating cable hooker amp hooker screw 5 warranty card Copyright Maddock Machine2015 All rights reserved Reproduction of the contents of this manual in any form or by any means is prohibited without the written permission of the copyright owners 2 3 THIS IS NOT A STOPPING BRAKE WARNING IMPROPER USE OF THE MDD or MM4 125 MAY RESULT IN SEVERE INJURY OR DEATH Your bike must be properly equipped to mount and use the drum brake 1 The rear hub must be threaded 1 37 X 24 tpi ISO bike on the non drive side 2 The left chain stay must have a fitting to restrain the reaction arm This fitting is sometimes called a pacman The distance from center of the axle to the rear of the pacman opening must not be greater than 4 46 113 28mm or less than 4 42 112 27mm See drawing num 3
5. 3 A device to operate the drum brake WARNING NEVER USE A SINGLE HAND LEVER TO OPERATE THE DRUM BRAKE AND THE REAR CALIPER BRAKE TOGETHER THE USE OF A SINGLE HAND LEVER IN THIS MANNER CAN LEAD TO UNPREDICTABLE AND UNCONTROLLABLE SKIDDING OF THE REAR WHEEL LOSS OF CONTROL OF THE BIKE SEVERE INJURY EVEN DEATH The most common operators are A A third brake lever B A friction shift lever C A bar end shift lever D An equalizer may be used to operate both front and rear caliper brakes with one brake lever and the second lever used to operate the drum brake The operator may be mounted at the captain or stoker position SECTION 2 Copyright Maddock Machine2015 All rights reserved Reproduction of the contents of this manual in any form or by any means is prohibited without the written permission of the copyright owners 4 IF YOU ARE NOT FAMILIAR WITH THE TOOLS OR PROCEDURES DESCRIBED IN THIS MANUAL CONSULT WITH YOUR DEALER Things you will need 1 Cleaning Equipment A A toothbrush or other small fine bristle brush B Solvent or cleaning solution C Rags or paper towels 2 Tools A 2 mm hex wrench B Cable cutter C Inch Lb rated torque wrench with 2mm hex drive bit 3 Supplies A Anti seize or high temperature grease 1 Remove rear wheel 2 Remove QD quick release skewer 3 Remove existing brake if applicable 4 Remove non drive side serrated washer and spacer 5
6. Remove thread protector if present 6 Clean hub and drum threads with solvent and brush 7 Dry threads 8 Examine threads Threads must be free from damage dings dents or any disruptions of the threads If any damage is found DO NOT PROCEED WITH INSTALLATION CONSULT YOUR DEALER 9 Lightly coat threads with anti seize or high temp grease 10 Thread drum onto hub It is critical that extreme caution be used when starting the threading Cross threading can damage the hub and the drum If you experience any difficulty in starting the thread or binding in threading the drum up to the shoulder STOP carefully remove drum Re clean threads and examine See step 8 above 11 Thread drum on until it stops at the shoulder of the hub DO NOT TIGHTEN Somewhat loose is good at this point as the drum will tighten with use 12 Clean up any anti seize or grease left inside the drum and the drum hub shoulder Copyright Maddock Machine2015 All rights reserved Reproduction of the contents of this manual in any form or by any means is prohibited without the written permission of the copyright owners 5 The outer plate is supplied with a bushing allowing the brake to be installed on hubs with either a 10mm or 12mm axle If your hub is equipped with a 10mm axle use the outer plate as supplied For use with 12mm axles the bushing must be removed The best method of removal of the bushing is with the MDD bushing removal tool available from
7. your dealer If you must remove the bushing without the bushing tool BE VERY CARFULL NOT TO DISTORT THE OUTER PLATE A small punch with a flat tip may be used to remove the bushing Support the outside of the outer plate on a hardwood block centered over a hole slightly larger than 12mm with the small punch contacting ONLY the bushing gently tap the bushing out with a small hammer 1 Place outer plate on axle and push all the way on 2 Check for clearance between the inside of the reaction arm and the outer lip of the drum There must be no less than 1mm of clearance There are two shims supplied with the drum brake One each of 1mm and 5mm Remove outer plate Use one or both to obtain proper clearance Re instal outer plate See drawing num 4 3 Install the serrated washer 4 Check the above clearance again 5 Temporarily install wheel into dropouts WITHOUT the reaction arm engaging the pacman tighten QR to your normal setting CHECK CLEARANCE AGAIN he CAUTION Failure to allow for proper clearance between the drum and reaction arm will damage the drum and void warranty 6 Remove and reinstall wheel with reaction arm anchor bolt engaged into the pacman The outer plate MUST NOT be pushed out of alignment by the reaction arm or the anchor bolt head touching the side of the pacman If the arm or bolt head is touching the pacman remove wheel and VERY GENTLY slightly bend the arm so that only the barrel of the bolt touc
8. ARRANTIES WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE OR ARISING FROM A COURSE OF DEALING OR USAGE OF TRADE ARE SPECIFICALLY EXCLUDED AND THERE ARE NO WARRANTIES EXPRESS OR IMPLIED WHICH EXTEND BEYOND THE DESCRIPTION OF THE PRODUCT CONTAINED IN THIS MANUAL THE WARRANTY SHALL BE LIMITED TO THE REFUND OF THE PURCHASE PRICE FOR THE PRODUCT THE MANUFACTURER SHALL NOT BE LIABLE FOR PROXIMATE INCIDENTAL CONSEQUENTIAL OR OTHER DAMAGES MANUFACTURER S LIABILITY SHALL BE LIMITED SOLELY AND EXCLUSIVELY TO A REFUND OF THE PURCHASE PRICE Copyright Maddock Machine2015 All rights reserved Reproduction of the contents of this manual in any form or by any means is prohibited without t 15 ae written permission of the copyright owners
9. USER MANUAL MAD DOG DRAG BRAKE MADDOCK MACHINE LLC VIDA OREGON Copyright Maddock Machine2015 All rights reserved Reproduction of the contents of this manual in any form or by any means is prohibited without the written permission of the copyright owners 1 TABLE OF CONTENTS TABLE OF DRAWINGS ABOUT THIS MANUAL TERMS amp CONVENTIONS TABLE OF DRAWINGS This manual is divided into four main sections Section 1 This section describes The function of the brake The kit contents Section 2 This section describes Tools and supplies needed Installation of the Drum Installation of the Outer Plate Installation of the Hooker Section 3 This section describes Drum removal Section 4 This section describes Daily checks Maintenance Suggestions for use TABLE OF DRAWINGS Drawing num parts shoe side Drawing num 2 parts outside Drawing num 3 Pacman to axle center distance Drawing num 4 Reaction Arm to Drum clearance Drawing num 5 Reaction Arm amp bolt head clearance with pacman Drawing num 6 Cable length measurement hooker Screw placement Cable cut Drawing num 7 Hooker Screw extension PARTS LIST eee e ecc a WARRANTY ant upnn es ueri cune rid n nr adden ripe Copyright Maddock Machine2015 All rights reserved Reproduction of the contents of this manual in any form or by any means is prohibited without the 2 EET TATE 14 aa et eis aa ER 15 written permission of the copyright owners
10. ce with 150 grit sand paper to remove the glazing 1 When approaching a steep or long descent moderate your speed 2 Actuate drum brake before you get to white knuckle speed 3 When descending a long hill pulse the brake to allow it to cool 4 Be very careful when using the rear caliper brake and the drum brake together The combination of the two may cause skidding of the rear wheel leading to loss of control It is best to release the drum prior to engagement of the rear caliper brake 5 Give control of the brake to the stoker they are way smarter than you and will most likely save your life Thanks for purchasing the brake Tom Maddock Maddock Machine Vida OR 97488 541 896 3843 Copyright Maddock Machine2015 All rights reserved Reproduction of the contents of this manual in any form or by any means is prohibited without the written permission of the copyright owners 9 Drawing num 1 OS Drawing num 2 Copyright Maddock Machine2015 All rights reserved Reproduction of the contents of this manual in any form or by any means is prohibited without the written permission of the copyright owners 10 Drawing num 3 Pacman to axle center distance q MINIUM d zia L7 1122mm CDU A Pd 4 Pacman r NO MAXIMUM P d 4 46 X L4 113 28mm Q7 T AXEL CENTER Drawing num 4 Reaction Arm to Drum clearance Reaction Arm Minium 1mm M PPUNPUA e t A here P
11. hes the pacman Reinstall wheel and check arm bolt head pacman clearance adjust as necessary See drawing num 5 a WARNING DO NOT USE A LONGER BOLT TO ADJUST THE CLEARANCE 7 Check the for and aft position of the anchor bolt barrel in pacman slot The anchor bolt barrel must be close to rear end of the slot but not touching it If the anchor bolt is not in the above position STOP the installation 8 Engage brake manualy and turn wheel counterclockwise to tighten deum onto the hub This will tend to centralize the drum to the hub Copyright Maddock Machine2015 All rights reserved Reproduction of the contents of this manual in any form or by any means is prohibited without the written permission of the copyright owners 6 WARNING STOP DO NOT PROCEDE WITH INSTALLATION REMOVE THE BRAKE DO NOT USE THE BRAKE THE PACMAN IS IN THE WRONG POSITION FOR USE WITH THIS BRAKE DAMAGE TO YOUR FRAME MAY OCCURE CONTACT YOUR DEALER 1 Install operator and cable at desired position 2 Route cable to left chain stay 3 Remove hooker screw from hooker 4 With a 2mm hex wrench back out set screws so that the cable passes through the axial hole of the hooker screw 5 thread cable through axial hole of the hooker screw 6 place hooker on actuating arm 7 push actuating arm forward until resistance is felt 8 Hold hooker hooker screw parallel to the hooker so that the faces touch See drawing num 6 9 With a 2mm hex
12. nter clockwise DO NOT TOUCH BRAKE WITH BARE SKIN AFTER USE IT WILL BURN YOU ALLOW BRAKE TO COOL BEFORE TOUCHING IT SECTION 4 l Prior to use you should visually check the brake to ensure that it appears to be in working order 2 Operate the brake before starting your ride to ensure that the brake seems mechanically sound 3 On level ground before you get to hills on which you will want to use the brake actuate the brake gently as a test of smooth operation 4 After using the brake in wet weather be very careful applying the brake until you are sure that the brake operates smoothly The braking surface of the drum can develop rust which can effect the smooth operation of the brake If you encounter this problem repeated gentle operation of the brake will smooth it out if this does not smooth out operation of the brake see 72 in maintenance section Copyright Maddock Machine2015 All rights reserved Reproduction of the contents of this manual in any form or by any means is prohibited without the written permission of the copyright owners 8 1 Always perform the daily checks 2 After a lengthy period of storage the outer plate should be removed to check the condition of the braking surface of the drum and the braking surface of the shoes If the braking surface of the drum shows any sign of rust lightly sand the surface with 150 grit sand paper If the shoes appear to have a glazed surface lightly sand the surfa
13. wrench snug up the two set screws 10 Cut cable at right hand end of the hooker screw See drawing num 6 11 Tighten set screws 10 to 12 Inch Lb 1 1 to 1 4 NM with torque wrench 12 Install hooker screw into hooker thread together until there is about 1 16 to 1 8 1 6mm to 3 2mm between the faces 13 Push Actuation Arm forward engage hooker pin into Actuation Arm slot Be sure the hooker pin drops to bottom of the hooker slot The brake should not be engaged at this setting If brake is engaged unscrew hooker screw until brake is not engaged WARNING THE MAXIMUM SPACE ALLOWED BETWEEN THE HOOKER SCREW FACE AND THE HOOKER FACE IS 15 64 5 95mm UNDER NO CIRCUMSTANCE MAY THIS SPACING BE EXCEEDED SEE DRAWING NUM 7 14 TEST THE BRAKE ON LEVEL GROUND BEFORE USING IN HILLY TERRAIN Copyright Maddock Machine2015 All rights reserved Reproduction of the contents of this manual in any form or by any means is prohibited without the written permission of the copyright owners SECTION 3 USE ONLY APPROVED TOOLS FOR DRUM REMOVAL USE OF OTHER TOOLS OR METHODS MAY DAMAGE DRUM AND VOID WARRANTY APPROVED TOOLS FOR DRUM REMOVAL 1 MMDB 00037 special wrench for use in conjunction with a 1 2 ratchet wrench or breaker bar Available from your dealer 2 1 5 8 or 41mm Socket 1 Remove rear wheel from bike 2 Remove outer plate 3 Apply special wrench or socket to central hex of the drum unscrew cou
Download Pdf Manuals
Related Search