Home

Remote Administration System Plus (RASplus)

1. OSD Setup Select options to display on the screen Load Default Map at Startup Select whether or not the user defined map file is loaded automatically when RASplus starts and designate the path of the map file rmp to load 17 User s Manual e Recording Setup Set up the Use On or Off of the panic recording function and overwriting option of the recording folder On or Off When using the panic recording function and overwriting option RASplus continues recording when the hard disk drive is full by overwriting the oldest video Designate a recording folder path and set the recording folder size from 640MB to 2 048MB Capacity shows the remaining space of the recording folder NOTE The recording folder size cannot be changed once it has been set Designate another recording folder path if you want to expand the recording space Recording Mode Setup Set up the panic recording mode e ATT e Visible Watch Camera Records camera channels currently displayed on the Watch screen visble Watch Camera e User Assignment Setup Records camera channels assigned by the user Ai on the Watch screen REPETE EN e Camera Range Setup Records camera channels within preset channel E PE range Select the boxes beside Camera and adjust camera range up to 16 channels NOTE Panic recoding will NOT be made for the cameras currently not displayed on the Watch screen even though they are set up to be recorded NOTE When sel
2. 2 Connect the PDA to the PC Click the OK button when the following message box appears and then click the Cancel button when the following setup screen appears This procedure can be skipped if the Microsoft ActiveSync or Microsoft Windows Mobile Device Center program 1s already installed on the PC 57 User s Manual T Synchronization Setup Wizard Welcome to the Pocket PC Syne Setup Wizard To sel up a quo partnership between this computor and yout Pethi PC Elk af k Ne Mitromon Actiee Sync N Yau wil ba able to ppnehroriza andy dled kdar sad ghe nono fama H yay caning you click Cancel you cai pil Te ayachranize E mbll Calendar Contacts reeks nd Motes with thik computer de the lolo wir S Y Core and move Mos bobaran your Packa PL Disconnect he device install and son Gutooic and Ben seconneci the device and completa tha Synchecnizaton Setep Wizard i is a dd rd romi piian oh your Packa PE 3 The Microsoft ActiveSync or Microsoft Windows Mobile Device Center program runs in the PC and the connection status between the PC and PDA is displayed as follows If the connection is made correctly it is displayed as Connected Microsoft ActiveSync Eile View Toole Help Ey Explore connected Show Detalle 5 4 Run the RAS Mobile _Setup exe file on the PC 5 When the following dialog box appears click Next The progress bar shows the installation progress HAS Mahila Pocket PL installation RAS Mobile will b
3. 4 Designate the folder path to install RASplus and select the user s who can use RASplus Then click Next R RASplus Select Installation Folder The installer will install RAS plus to the following folder To intall in this folder click Next To install to a different folder enter it below or click Browse Folder Install RAS plus for yourself or for anyone who uses this computer Everyone O Just me Cancel User s Manual 5 When the following dialog box appears click Next iz RASplus Welcome to the RASplus Setup Wizard The installer will guide you through the steps required to install RASplus on your computer WARNING This computer program is protected by copyright law and international treaties Unauthorized duplication or distribution of this program or any portion of it may result in severe civil or criminal penalties and will be prosecuted to the maximum extent possible under the law Cancel 6 Click Next ie RASplus Confirm Installation The installer is ready to install RAS plus on your computer Click Nest to start the installation ie RASplus Installing RASplus C Automatically run RASplus when log on to Windows iPDR mobile for iOS 8 Set the language option by selecting either Select language when starting RASplus or Always start RASplus using the language below If you select Always start RASplus using the language below select the desired sta
4. e Show Text In 49 User s Manual Click the ll icon to save clip images Save as Image e Save as Image Saves the current image as a bitmap or JPEG file e Save as Image Actual Size Saves the current video frame as a bitmap or JPEG Save as Clip Copy file in its actual size Single Screen Layout Only ELO e Save as Clip Copy Saves video of desired time range as an executable file Clip Copy Log e Save as Video Saves video of desired time range as an AVI file e Clip Copy Log Saves the clip copy log information as a text file The user information about Save As Clip Copy will be logged as Internal Copy Click the amp icon to enlarge the image or display the image in its actual size Single Screen Layout Only You can move the enlarged image by clicking the left mouse button and dragging Click the E3 icon to display the image full screen Click the 2 icon and set up the date and time of a saved image to view the image from the specific time Encryption icons display at the bottom right corner amp displays when the clip file has not been tampered with and J displays and playback stops when the system has detected tampering NOTE If the VGA card or monitor does not support 800x600 video resolution Full Screen might not display properly If this happens press the ESC key on your PC keyboard to return to the normal screen mode Click the slider bar and move it left or right to move through the video clip Pl
5. Status Version 15 User s Manual 3 3 Menu a RASplus Remote Administration System Plus RemoteSite 1 System view Remote Favorite Sequence Record Image Layout Help a Remote Sites 1 x PEE LO FD ER a Y MALAS System Menu 4 RASplus Remote Administration System Plus RemoteSite1 System View Remote Favorite Sequence R ecord Image Layout Help Bh setup zoa e Bl CO EH AB BH ES ba 62 Bs la Load Setup File q AMI jis Save Setup File EX M Batch Job Setup 1 E Disconnect a View Log Exit gt Setup Allows setting up the system operation and remote site configuration system System 2 Remote Sites Favorite Sites Sequence Sites Date Time Format Date Time 12 21 2010 14 30 42 Date Format Time Format Display Option Screen Option C Watch Screen C Search Screen 4 Watch and Search Screen Hide the Message Box Drag amp Drop Popup Option v Use Left Mouse Button 4 Use Right Mouse Button Drawing Mode Setup OSD Setup C Load Default Map at Startup Map File Path Recording Setup Use Recording Overwrite Recording Mode Setup System 1 Set up the date time format for RASplus display option and panic recording function 16 iPDR mobile for iOS e Date Time Format Set the date time format e Display Option Set up the screen display drag amp drop popup option
6. gt D gt Watch earch aPOR mabile Remote Site 1 Edit e Screen Tapping a camera screen displays video from the camera in single screen layout Pushing the Cancel button of the mobile device returns to the previous layout Dragging the screen moves to the previous or next camera group as long as there is video for the groups in the current screen layout Tapping a camera screen in single screen layout hides or displays OSD On Screen Display information nl Layout Changes the screen layout Tapping the button displays a list of available layouts and allows you to select a layout In landscape tapping and holding the screen displays a list of available layouts E K Camera Displays a list of camera channels Tapping a channel displays video from that camera This function 1s not supported in landscape fs PTZ Mode Enters the PTZ mode and allows you to control a PTZ camera in single screen layout only This is not available if a PTZ camera 1s not configured in the device A PTZ icon is displayed on the camera screen when the PTZ mode is available X Audio Enables or disables two way audio with the device in single screen layout only The screen layout or camera channels cannot be changed while two way audio 1s enabled e Y Received Data Displays the data volume This function is not supported in landscape NOTE Some functions may not be supported and the corresponding buttons may not be displayed depending
7. the text are displayed from the event list e Event List Tapping an event from the list displays the event detected image on the screen Tapping the Query Next button at the bottom displays the next 100 events Reload Reloads the event list Tapping the ml Calendar Search button in the search and playback mode allows you to search for recorded video of a specific time Calendar June 2012 Wed Vir Mo Tus 28 29 30 4 5 6 11 12 13 dE 25 26 27 Timelaps wa d V2 0 io 17 12 13 1a 3111 2 7 8 9 14 15 16 21 22 23 28 15 ie 17 i8 ti F 3 Tapping a date on the calendar displays the recorded data from the selected date by time in one hour segments at the bottom Date e012 6 19 i B Tapping a specific hour at the bottom allows Time 14 48 11 i y you to select a precise time down to the minute and second Tapping the Move Hour Min Sec button displays recorded video of the selected time 17
8. DVR RAS Mobile 3 1 4 in order Clicking the Delete button uninstalls the program 58 iPDR mobile for iOS Configuration and Operation The Graphical User Interface GUI of the RAS Mobile is as shown below and the description of each menu buttons follows 9090000 FO 1 Monitoring Screen Displays live video images from the cameras at the remote site 2 Status Information Displays RAS Mobile version information and the status information about the remote site connection 3 Menu Buttons Performs RAS Mobile functions Connection Camera 6 Screen Mode 2 Image Adjustment PTZ Control Alarm out Control x Disconnection Connection Click the button to perform remote site management DVRNS settings and remote connection e Change Select the site you want to change and click the Change button and then edit the site information Remove Select the site you want to remove and click the Remove button DVRNS Click the DVRNS button to set up the DVRNS function and the DVR Name Service screen is displayed Enter the DVRNS server s IP address or domain name and port number The IP address or domain name and port number you enter should match the values set during the DVRNS setup on the remote DVR you want to connect to Connect Select the site you want to connect to and click the Connect button Once you connect to the remote site the live video of camera displays Ifthe connection fails the
9. Microsoft Windows 8 e CPU Intel Pentium IV Celeron 2 4GHz or faster e RAM 512MB or higher e VGA AGP Video RAM 8MB or higher 1024x768 24bpp or higher User s Manual iPDR mobile for iOS Chapter 2 Installation CAUTION If an older version of RASplus software is installed in your computer you should uninstall the older version first NOTE In the Windows Start menu go to Control Panel Double click the Power Options to open the Management Properties dialog box Under the Power Schemes tab set both Turn off monitor and Turn off hard disks to Never 1 Insert the installation CD 2 Run the Setup exe file NOTE Run the file as the administrator user otherwise the installation will fail If you have logged on as other user you will be asked to enter the administrator user name and password when running the file NOTE The User Account Control window might appear when using Microsoft Windows Vista or later operating system Click Allow and install RASplus software following the instructions 3 The NET Framework and the Visual C Runtime Libraries are installed automatically Microsoft NET Framework 2 0 Microsoft Visual C 2005 Redistributable e e o 108 0 8 0 0 0 0 0 0 0 0 0 0 0 0 0 4 0 NOTE Installing the NET Framework and the Visual C Runtime Libraries is required for RASplus to operate properly This installation step will be skipped if they are already installed on your computer
10. Please make sure that DirectX version 9 0 or higher has been installed if the display problem continues To check the version of DirectX click Start RUN and type dxdiag then hit the enter key which will display DirectX Diagnostic Tool dialog box Then move to the Display tab and make sure DirectDraw Acceleration is set to Enabled Test DirectDraw by selecting the DirectDraw Test button when using the Microsoft Windows XP operating system Please check the driver version of the video card and update it to the latest version available If you still have display problems after changing all display settings as described above try replacing the video card Video cards with an ATI chipset are recommended Clicking EJ exits the Player program Click aj to go to the beginning of the video clip Click 44 to play the video clip in fast reverse Click ef to go back one frame of the video clip Click to play the video clip Click to go forward one frame of the video clip Click pp to play the video clip in fast forward Click pH to go to the end of the video clip Click 48H to show the previous camera group if there is recorded video in the previous camera group in the current screen mode Click to cycle through the screen layouts It cycles through 2x2 1 7 3x3 4x4 4x5 5x5 and 1 32 NOTE 4x5 5x5 and 1 32 screen modes might not be supported depending on the number of saved camera channels Click EX to show the next ca
11. and version of the remote DVR 12 iPDR mobile for iOS Clicking the right mouse button on the Map panel causes a text menu screen to display Selecting Watch Event View from the menu displays the event information of the connected remote sites Selecting Close disconnects the current connection on the Map panel PTZ Color and Alarm Out Control Panels E ax Color Control ax Alarm Out Control ax YE ge s eaaaa kK DAGO PTZ gy Color A Alarm Imag Plz La Color A Alarm Imag E PTz gy Color A Alarm TY Imag Three panels allow PTZ control color control and alarm out control while live monitoring a remote site NOTE Refer to 4 7 Live Monitoring for more details Image Processing Panel Image Processing 2x The Image Processing panel allows enhancing played back images 6 4 O NOTE Refer to 4 2 Playback and Search for more details PTZ gh Color A Alarm B Imag Watch Event View Panel Watch Event View ax Site Event Date Time A i RemoteSite2 ES CAM4 06 16 2008 02 59 13 i RemoteSite2 ES CAm4 06 16 2008 02 59 10 i RemoteSite2 ES CAM4 06 16 2008 02 59 44 i Remotesite2 ES CAM1 06 16 2008 02 56 26 i Remotesite2 ES CAMm2 06 16 2008 02 56 26 i RemoteSite2 ES CAM1 06 16 2008 02 56 26 i RemoteSite2 ES CAM4 06 16 2008 02 56 25 i RemoteSite2 ES CAm4 06 16 2008 02 58 20 i RemoteSite2 ES CAm4 06 16 2008 02 56 00 i Remntesite FR cama M6 16 28N2 NF SAN Mi KS Wa
12. button functions the same as when selecting the Device menu feature of the Advanced menu NOTE When live video is out of focus after the camera is moved or video is zoomed in or out clicking the Auto Focus button adjusts the focus automatically some models of Network Camera connection only NOTE Using the mouse for PTZ control is supported Click the left mouse button on the image and move that image in the direction you want to by dragging the mouse Use the mouse wheel to zoom in and out NOTE Not all DVRs support the PTZ control at RASplus Refer to the user manual of the DVR Alarm Out Control J0 amp gt Ji Control alarm out devices or beep on the remote DVRs by clicking the ON or OFF buttons Only the users authorized for alarm out control can control an alarm out at RASplus NOTE Not all DVRs support the alarm out control at RASplus Refer to the user manual of the DVR 4 2 Playback and Search RASplus allows you to play back and search recorded images on remote DVRs It also provides additional functions including zoom various image enhancements image saving and image printing To use remote playback and search functions the display option must be set to of Search Screen or Watch and Search Screen during System setup To connect a remote site on the Search screen select the site or camera you want to connect to in the Remote Site or Favorite Sites panel and then drag and drop it in the desired position on
13. combine it with If the panels can be combined the four position arrow icon will have a tab symbol in the center Drag the cursor over the tab symbol l and a new tab appears on the panel Release the mouse button and the panels will E now be combined The layout possibilities are virtually unlimited With a little experimentation you will be able to lay out the screen so that 1t best meets your workflow 10 Remote Sites Panel Remote Sites nx GA RemoteSites Remote5ite E RemoteSite FRenniateS ites 5d Remote Sites EN Favorite Sites E Map iPDR mobile for iOS The Remote Sites Panel displays a list of remote sites registered during RASplus System setup and a list of installed cameras at the remote sites e 3 Entering the site name in the query box and clicking the icon allows you to find the remote site easily in the Remote Sites list e EF Clicking the icon allows you to register a remote site e Ex Clicking the icon removes the selected remote site from the list e E Clicking the icon allows you to edit the site information of the selected remote site from the list To connect to a remote site select the site or camera you want to connect to from the list and then drag and drop it in the desired position on the screen or the Status View panel The screen displays images from selected cameras and the Status View panel displays the system status information of the connected remote site Selecting
14. display acceleration and OSD Screen Option Select Watch Screen to use the screen for live monitoring only Search Screen to use the screen for search only or Watch and Search Screen to use the screen for both live monitoring and searching Selecting Hide the Message Box hides the message box that displays the status information about RASplus and remote site connections Drag amp Drop Popup Option Select which mouse button will be used when displaying popup menu screens from Use Left Mouse Button Use Right Mouse Button or both Watch and Search Screen mode only Drawing Mode Setup Set up the display options for the screen e Normal Drawing Depends on your PC s CPU performance and displays images in low speed DIB Draw Mode Fast Drawing Default Displays image in normal speed Direct Draw Mode Fast Drawing YUV420 RGB32 Depends on your PC s video card performance and displays images in high speed Direct Sater airs Draw Mode Sa ee Overlay YUV420 RGB32 RGB565 Displays image in high speed Direct Draw Overlay Mode Deinteriacing Soften Filter Deinterlacing Set up the deinterlace filter Using a deinterlace Aspect Ratio Fit to Screen filter for interlaced video enhances image display quality by anti aliasing Screen eliminating horizontal scan lines and noise in areas with motion Aspect Ratio Set up the image aspect ratio displayed on the screen Selecting Fit to Screen displays images by fitt
15. events that occurred while recording on an SD memory card is enabled Calendar Search Allows you to search for recorded video of a specific time e ET Camera Displays a list of camera channels Tapping a channel displays recorded video from that camera e Received Data Displays the data volume NOTE In landscape of iPod Touch or iPhone not all functions above may be supported In this case perform the functions in portrait Search by Event Tapping the Ey Event Search button in the search and playback mode allows you to search for a specific event If the device is a network camera or network video transmitter not all events are searched but only the events that occurred while recording on an SD memory card is enabled NOTE This feature is NOT supported for PC based devices 76 Site EVENT SEARCH Motion Detection Tripama TripZone Triplont TripZone Tripdone Motion Detection TripZone ad 2013 01 00 15 00 04 2013 01 09 11 02 37 2013 01 00 16 02 gt 2013 01 40 Wet ji 2013 01 00 1 00 10 AL WoO ae 2017 01 09 1H 2013 01 09 1EM Search by Calendar iPDR mobile for iOS A list of events that occurred on the same date as the recorded video on the current screen is displayed If you want to search for events for other dates change the date by using Calendar Search and repeat Event Search e Search If you enter text that you want to search for search results matching
16. far e 3 2 IRIS Close Open Closes or opens IRIS NOTES e Drag the menu bar to display hidden buttons when there is not enough space on the menu bar to display all the buttons e Not all PTZ functions above may be supported in landscape depending on the mobile device e Dragging screen in the PTZ mode moves the PTZ camera in the opposite direction If you want the PTZ camera to move to the same direction you are dragging go to Settings iPDR mobile in the mobile device and set the PTZ Direction Reverse setting to ON as shown ka Location Services On 3 icp General g Twitter EA Salari 2 Photos Port 10088 PTZ Direction er POR mabile 75 User s Manual Search and Playback Select a device from the device list and a menu is displayed Tap Search Video recorded in the device is displayed on the screen e gt Play Pause Plays or pauses recorded video on the screen X A Move to the First Image Last Image Moves to the first last recorded image of the date e 7 LJ Fast Backward Forward Plays back recorded video fast backward or fast forward e TI 1 Move to the Previous Image Next Image Moves to the previous next image frame This function is not supported in portrait e Ey Event Search Allows you to search for a specific event If the device is a network camera or network video transmitter not all events are searched but only the
17. gt Remote Setup Allows you to change the setup of a remote DVR Select the remote site on the Remote Sites panel initiate the Remote Setup menu and the setup screen displays NOTE Refer to the user manual for the remote DVR for more details on system setup gt Remote System Log Remote Event Log Displays the system log and event log information of aremote DVR Set the time range of interest and click the Find button The log entries within the time range displays in the list 100 results can be displayed in a single page Click the Move buttons to display additional results 27 User s Manual Log RemoteSite1 System Log Event Log 099 098 097 0396 095 094 093 092 091 090 089 088 087 086 085 084 083 082 081 080 From V First To Last Event Panic Off Panic On Panic Off Panic On Remote Setup Change Remote Time Change Remote Login admin Remote Logout admin Remote Login admin Remote Logout admin Local Search Begin Local Setup End Local Setup Begin Local Login admin Remote Login admin Boot Up Shutdown Local Logout admin Local Setup End Local Setup Begin Local Setup End Date Time 2007 12 11 02 27 48 PM 2007 12 11 02 27 43 PM 2007 12 11 02 27 41 PM 2007 12 11 02 27 38 PM 2007 12 11 02 20 37 PM 2007 12 11 02 20 31 PM 2007 12 11 02 21 07 PM 2007 12 11 02 21 03 PM 2007 12 11 02 20 33 PM 2007 12 11 12 15 44 PM 2007 12 11 10 41 58 AM 2007
18. in one of the multi view formats selecting Previous Cameras or Next Cameras will move to the previous or next page In other words when viewing Cameras to 4 in the quad format selecting Previous Cameras will display Cameras 61 to 64 and selecting Next Cameras will display Cameras 5 to 8 Selecting Full Screen enters the full screen mode To return to the previous screen mode press the Esc key on the keyboard or select FullScreen Close x from the popup menu displayed by clicking the right mouse button gt Frame Layout 30 Screen Layout Frame Layout gt EL Layout Load ir ETT yy E Layout Setup 1 Layout Load Select the desired frame layout and click the Load button to apply the selected frame layout to RASplus LATET e Default Layout Displays the panels that are used most frequently in the Watch and Search screen modes e Admin Layout Displays only the panels that are used most frequently in the Admin screen mode e Full Layout Displays all the panels e Hide Layout Hides all panels and displays only the screen e User Defined Layout Displays the user defined layout O Admin Layout O Full Layout O Hide Layout O User Defined Layout Layout Mame Layout 1 Layout Setup The user can configure the frame layout by displaying panels on the screen where they are most convenient Set up the user defined frame layout seur e Always Load La
19. preset for notification at the remote site that were called from individual remote sites LAN connection only Selecting an event from the list and then dragging and dropping it in the desired position on the Watch or Search screen connects to the remote site and a checkmark is placed in the box at the left Selecting an event or site from the list and then clicking the right mouse button causes a tooltip to appear which contains the emergency event instruction from the remote site NOTE The Emergency Event View function is available only for the remote sites that were set to notify the RASplus system when configuring each event setup Report View Panel Report view me A Date Y 06 16 2008 Y 06 16 2008 Y 06 16 2008 Y 06 16 2008 Y 06 16 2008 Y 06 16 2008 Y 06 16 2008 Y 06 16 2008 YX 06 16 2008 16 45 00 16 44 56 16 44 54 16 44 44 16 44 40 16 44 38 12 10 03 12 09 57 12 09 51 Site RemotesiteS Remotesite2 Remotesitel RemotesiteS Remotesite2 Remotesitel RemoteSite3 Remotesite2 RemoteSite1 Camera Alarm In Record Record Check 1 Not Use On Off Ing we ene wee ee eee 6 10 16 Not Use On Off 1 Not Use On Off Ing 6 10 16 Not Use On Off 1 Not Use On Off TREER x Watch Event View Emergency Event View ta Report View To Search View 14 Record Period 06 15 2008 00 00 00 06 16 2008 10 49 02 06 15 2008 13 35 57 06 16 2008 15 52 50 06 15 2008 00 00 00 06 16 2008 10 48 46 06 15 200
20. the current connection and closes the RAS Mobile program 60 iPDR mobile for iOS aPDR mobile for Android aPDR mobile for Android allows you to access devices DVRs network video transmitters and network cameras and monitor live video remotely via network connection using the Android platform based mobile devices anytime from virtually anywhere System Requirements e Operating System Google Android 2 0 to 4 1 e Processor ARMv5TE ARMv6 and ARMv7 A compatible processor e Display 240x240 pixel to 1280x800 pixel e Storage 25MB or more e Network Wi Fi or mobile network 3G or 4G supported by the Android mobile device System Diagram DVR NETWORK Installation 1 Run the gt Play Store Google Play application in the mobile device 2 Enter aPDR mobile in the search field of the Play Store Google Play application 3 Install the aPDR mobile program and run the program p BE 20 47 a gt romana aPDRemobile BA 20 gae zns aPDR mobile a APPS aPOR mabile 3 a chi Free qwertyuio np asdfghjkl gt Ix cvbnm a fe na A m P24 61 User s Manual Apps aPDR mobile PACIFIC COMM NOTE If you want to remove the aPDR mobile program go to Settings Applications Manage applications Tap aPDR mobile and Uninstall button CAUTION This program uses large amounts of data and you are responsible for all data charges Please co
21. the screen The 4 icon will be displayed on each Search screen The remote site connection on the Search screen will automatically be disconnected if there is no activity for a specified amount of time Click the 1 button on the toolbar or select Disconnect from the System drop down menu to disconnect the current connection manually NOTE Connecting to a Favorite site will be available if the Search Screen display option was set up to connect to selected Favorite sites Refer to 3 3 Menu System Menu for more details on Favorite Site setup NOTE When selecting the display option of Watch and Search Screen during E System setup the remote site can be also be set to connect using the right or left mouse buttons This is user defined and must be set during System setup Select Search Screen to connect to the selected site on the Search screen when the text menu screen appears It is possible to display cameras in both the Watch Screen mode live view and Search Screen mode at the same time For example you can connect to a remote DVR site with nine cameras Drag and drop the site into the first frame on the viewing screen and select Watch Screen Live video will display in the first nine frames on the screen Then drag and drop the site into the 10 frame on the viewing screen and select Search Screen You will be able to view any video recorded on the remote DVR in frames 10 through 18 35 User s Manual Search View Panel Search v
22. to select the camera to be viewed Live video Images from the selected camera and the OSD information including camera name and date time will be displayed on the Monitoring Screen No Video will be displayed when there is no video signal from the selected camera NOTE The number of camera buttons depends on the specifications of the remote DVR E Screen Mode Allows you to select the desired screen layout The formats available are single screen quad and full screen Ci Elegir UD Er 1 2556000 O PA Single Screen Quad Screen Full Screen NOTE The selected camera video in the quad screen mode will be outlined in green NOTE PTZ control during the full screen display will be performed using the arrow buttons of the PDA device Clicking any place on the screen in the full screen mode returns to the previous screen mode m Image Adjustment Allows you to adjust the brightness contrast hue and saturation of the image Selecting B Undo cancels the image processing operation and reloads the original image Brightness Contrast Saturation Hue Undo PTZ Control Allows you to control pan tilt iris and zoom of the camera at the remote site and set certain position as preset and go to desired views Zoom In Out Iris Open Close Focus Far Near Set Preset View Preset Move buttons Alarm Out Control Allows you to control alarm out devices at the remote site Xx Disconnection Disconnects
23. up the information for the DVRNS server iPDR mobile for iOS Setting Remote 1 DVRNS Address DVRNS Address DVRNS Port DVRNS Port Use BB Mediaplayer Y Use BB Mediaplayer Add New Site Delete Site setting About Copy Show Keyboard Switch Application Close e DVRNS Address DVRNS Port Enter the IP address or domain name and port number of the DVRNS server The IP address or domain name and port number of the DVRNS server should match them registered on the devices e Use BB Mediaplayer Displays video from the device by using the built in BlackBerry media player It increases the display speed but may cause problems displaying video If video is not displayed when using this function disable this function Monitoring 1 Select a device to monitor from the device list in the default menu Video from the device is displayed on the screen Device list Remote Remote 1 Please Wait 2 Push the Menu button of the mobile device and a camera list is displayed Select a desired camera from the camera list and video from the camera is displayed on the screen Camera 1 Camera 2 Camera 3 Camera 4 Show Keyboard Switch Application Close 69 User s Manual 3 Push the Cancel button of the mobile device to monitor video from other devices The current connection is released and the default menu is displayed NOTE If the device uses a NAT Network Address Translation device for
24. 00 22 00 23 00 00 00 01 00 02 00 03 00 04 00 o gt E 123 4 5 6 7 8 9 1011 12 13 14 15 16 17 18 5 19 20 21 22 23 24 2 26 27 28 29 30 31 v The recorded data of each camera channel are displayed by time in one minute segments and a red vertical line indicates the selected time that will be played back The color of the bar indicates different types of recording Yellow for Pre event Purple for Event Red for Panic Orange for Irregular recording caused by temporary disconnection from the device and Blue for Time lapse The supported types of recording are different depending on the specifications and version of the remote DVR If the DVR has more than one video segment in the same time range each segment will be separated by a yellow vertical line a 1 0 RAMDSBS eA K lt a gt gt deeg k Y so 2009 7 02 00 03 00 04 00 05 00 06 00 07 00 08 00 09 00 10 00 1234 Con ee 3 21567891011 li2131415161718 CoM O 19 20 21 22 23 24 25 26 27 28 29 30 31 Cama A Es 37 User s Manual When searching video recorded on a PC based DVR the recorded data of each camera channel are displayed by time in one minute segments The color of the bar indicates different types of recording Yellow for Pre event Cyan for Motion Detection Lime for Object Detection Purple for Video Loss Brown for Video On Red for Sensor Gray for Text in and Blue for Time lapse To view an image from a specific ti
25. 12 11 09 05 34 4M 2007 12 11 08 53 24 AM 2007 12 11 08 53 24 AM 2007 12 11 08 53 04 4M 2007 12 11 08 52 54 4M 2007 12 11 08 50 42 4M 2007 12 11 08 50 41 AM 2007 12 11 08 50 40 4M 2007 12 11 08 50 39 AM 2007 12 11 08 50 38 AM v ga E e From Adjust the search starting date and time When First is selected it will search from the first logged item To Adjust the search ending date and time When Last is selected it will search to the last log Find Displays remote log entries within the selected period e Print Prints the log information e Save Saves the log information as a text or CSV file UTF 8 encoded Move Buttons Moves to the first page 1 lt previous page lt next page LJ or last page gt 1 You can go directly to a log page by clicking the page number button Close Closes the Log dialog box Favorite Menu System View Remote Favorite Sequence Record Image Layout Help YT Save Current Screen to Favorite Sites NOTE The Favorite menu can also be accessed using the toolbar controls Saves the current screen layout directly to the Favorite site Sequence Menu System View Remote Favorite Sequence Record Image Layout Help Sy Auto Sequence On Auto Sequence Off NOTE The Sequence menu can also be accessed using the toolbar controls Starts or ends auto sequencing Watch Screen Only Clicking Auto Sequencing On allows you to select a desired Au
26. 8 13 35 06 06 16 2008 15 52 34 06 15 2008 00 00 00 06 16 2008 06 14 05 iPDR mobile for iOS The Report View panel displays the system status information of remote sites RASplus checks the remote site and reports system status Clicking the icon on the panel reloads the data and clicking the 4 icon prints the report out Report Setup must be configured during RASplus System setup for this feature to function Refer to 3 3 Menu System Menu for more details NOTE Some report options may not be supported depending on the specifications of the remote DVR Search View Panel Search view Remotesite 1 hx ze Io Anahee Huda pwwl A e g 3 He Watch Event View Ex Emergency Event view oe Report wiew B Search View AemoteSite The Search View panel allows time lapse or event searching of recoded data on the remote DVR NOTE Refer to 4 2 Playback and Search for more details Status View Panel RASplus provides a status display remote setup system log and event log view of the connected remote site in real time To display a status of the remote site select a camera or a site from the Remote Site list and drag it to the Status View panel You can also select Connect Status from the popup menu displayed by clicking the right mouse button after selecting the site from the Remote Site list NOTE Refer to 4 5 Status View for more details Rec From 02 21 2010 09 35 13 Rec To 03 03 2010 21 50 35
27. A ee ee IS TE EF AAA FPE Hea ort HA ie 19 EFG FRIDA MAP ae IHR 1n FR pda AA ic ADA Tee HA 1 59 HD HTA 04 AAA ira deer rs nd rs ron vee Remote Administration System User Manual Remote Administration System Plus RASplus Table of Contents Chapter 1 OV VW a 1 CI M MVS IV ATAU eA Mess eres ose sees ces ccc E ON 1 1 2 RASPIUS Feature Sri dear 1 1 3 Product IO MATO aii ida 1 Chapter 2 INStallationy ranea r AA Aid 3 Chapter 3 Configurar ias 9 o RRE EE 12 A II II A IA 9 o A O me a Te ee 10 A De ee eRe aE SP Et E eee eR OO ee oR oe eee ae 16 Ott a ence ected tan et chant ea rae A sd ath tt lit eee tose 31 Chapter 4 ODE cal 33 Al EVO MONTON 33 4 2 Playback and SO iii is 35 4 3 Additional Functions ii td tas 42 AA Panie Recordingsi o i eie 43 A SAUS VW a a a a a 44 Appendix A Reviewing Video CLIPS ccooccoocconccoccconionnconccornconcoononcnnnns 47 Appendix B DVR Name Service DVRNS cccceecceeeseeeeeeeeseteeeeees 51 Appendix C Map Editor oocococccccnconocccconconccnaccnconconanonronnonnonanonnonanonos 52 Appendix D Monitoring Using Mobile Devices ocooccoccociocnconconcnoo 57 User s Manual PDR mobile for OS Chapter 1 Overview 1 1 In This Manual This manual describes installation and operation of RASplus Remote Administration System Plus software which is designed to be used with remote digital video recorde
28. NOTE You should follow steps 2 to 4 whenever connecting to the remote site because the DVR name and IP address might change at anytime 51 User s Manual Appendix C Map Editor The Map Editor program allows you to create maps of remote sites With the drag and drop and link function you can create and edit the map easily and efficiently Run the program by selecting MapEditor from the RASplus options under the Start menu in Windows 600 Left Too Evert Canvas Background Image Setting First prepare the image in a bitmap or JPEG file format Click the Background button on the toolbar and select the background image of the map Go to the Property Canvas tab and set the background image information e Name Enter a name of the background image e Horizontal Vertical Adjust the background image size by clicking each field and E General changing the numbers Name roname e Position Adjust the position of the background image on the screen Select Auto Eres 600 Fit to fit the map screen size to the background image Position Left Top 52 iPDR mobile for iOS Option Menu Click the Option menu to set up the remote site information device status display and remote site name to display He Site Information Setting Popup Dwell Time Status Color Setting Name Table Site Information Setting Select the Site Information Setting in the Option menu to set the inform
29. Pod Touch or iPhone General Nama Connection Info Address DVANS OFF Watch Por Search Port Audio Port Login Info PDR mobile HD a Mame Connection Info Address DVANS OFF Watch Port Search Port Audio Part Login Info User ID Password e General Enter the device name to use in the iPDR mobile program e Connection Info Enter the IP address and port number of the device If the device uses the DVRNS function enable the DVRNS option and enter the device name registered on the DVRNS server instead of the IP address The name you enter should match the name set during the DVRNS setup on the device e Login Info Enter the user ID and password set on the device The user ID and password you enter should match the user ID and password used to log on to the device 2 Ifthe registered devices use the DVRNS function go to Settings iPDR mobile in the mobile device Select DVRNS and enter the IP address or domain name and port number of the DVRNS server The IP address or domain name and port number of the DVRNS server should match them registered on the devices 12 ka Location Services il General E Twitter ER Satari 2 Photos iPDR mobile for iOS 3 Ifyou want to edit the information for the registered device or delete a device select the device from the device list and Edit in the menu Editing Device s information on iPod Touc
30. Refer to the user manual of the remote DVR for details on the search criteria for the text in search 38 iPDR mobile for iOS Set up the search criteria for the event search in the Event Search dialog box and click the Find button The results will be displayed in the event list A total of 100 results can be displayed at a time Click the Query Next button to display the next results If you select an event in the list the recorded data associated with that event will be displayed on the screen The images may be played back using the playback buttons When searching video recorded on a PC based DVR you can adjust the event dwell time from second to 10 minutes If you adjust the event dwell time RASplus will display the images of first queried event and ignore remaining events occurring during the preset period NOTE When First is selected for the search starting time the search will be from the first recorded data When Last is selected for the search ending time the search will be to the last recorded data Additional Functions gt Searching Data Source Click the button on the Search View panel to set up the data source to be searched e Search on Local Searches recorded data on primary storage installed in the remote DVR e Search on Archive Searches archived data on backup storage installed in the Data Source Search on Local O Search on Archive O Search on Other remote DVR e Search on Other Se
31. Sequence Dwell Time default 12u Sec 5 3600 default 120 Group List Auto Sequencing S34 Remotesites 2 default ea RemoteSitel ea RemoteSite2 ea RemotesSite3 a Sequence Site Configure the sequence site RASplus connects to the registered sites sequentially allowing connection to more than one remote site Register an Auto Sequencing group and add desired sites in the Group List to the Auto Sequencing group Video from the sites added to the Auto Sequencing group is displayed on the screen in the preset sequence interval during the sequence monitoring e Sequence Dwell Time Displays the preset sequence intervals from 5 seconds to 1 hour for each connection to the sites registered in the Auto Sequencing group You also can change the preset sequence interval e Auto Sequencing Displays the list of registered Auto Sequencing groups You can add a new group max 20 change the Auto Sequencing settings of a group or delete the group by using the popup menu displayed by selecting the Auto Sequencing group and clicking the right mouse button e Add Select the site to add from the Group List and click the Add button Select an Auto Sequencing group to add the site from the popup menu displayed by clicking the button e Add All Adds all sites in the Group List to the Auto Sequencing list Select an Auto Sequencing group to add all sites from the popup menu displayed by clicking the button e Remove Select the site to remov
32. a If the selected device is an alarm in device you can associate a camera with the sensor by entering the camera name The camera name you enter should be the same as the camera name entered under the Property Camera tab The Map panel pops up another screen and displays images of the camera associated with the sensor on the popup screen when an alarm in event occurs iPDR mobile for iOS Equipment IP Address User Password Port Each field is filled in automatically with the information user ID password and port number set in Site Information Setting or you can enter it manually Device No Set the device number 1 32 for each device Ifthe selected device is a camera Device No changes to Camera No DVRNS Use Select Yes to use DVR Name Service and the DVRNS field appears Enter the IP address or domain name and the port number of the DVRNS server and the name of the DVR registered on the DVRNS server NOTE You should not select numbers that are not supported for devices on the remote DVR when selecting Device No Otherwise the map cannot detect the device and it displays the device status as Unplugged For example Device No should be from 1 to 16 when the device is connected to a 16 channel DVR NOTE If you set the IP address and port number of the DVRNS server in Site Information Setting the DVRNS fields are filled with the information automatically NOTE The DVRNS function is supported only with the devices
33. a site from the list and clicking the right mouse button displays a popup menu e Connect Status View Displays the remote site status information in the Status View panel Refer to 4 5 Status View for more details Remote Setup Allows you to change the setup of the remote DVR Refer to 3 3 Menu System Menu Setup for more details Remote System Log Remote Event log Displays the system log and event log information of the remote DVR Refer to 3 3 Menu Remote Menu for more details e Remote Desktop Allows you to connect to the remote site using the VNC function For this function to work the VNC function must be enabled in the remote DVR and a port number and password for the VNC remote connection should be registered during the remote site registration at RASplus Refer to the user manual of the remote DVR for details about the VNC function This function may not be supported depending on the specifications and version of the remote DVR Favorite Sites Panel Favorite Sites a x LA Favorite LA Favorite LA Favorites Ea Remote Sites EN Favorite Sites E Map j The Favorite Sites panel displays the list of Favorite sites registered during RASplus System setup Selecting the Favorite site you want to connect to from the list and then dragging and dropping it in the desired position on the screen connects all remote sites registered in the Favorite site automatically 11 User s Manual Map Panel Map ax The Map panel allo
34. acing the mouse cursor on an image and clicking will cause that image to display full frame NOTE Some options may not be available depending on the specifications and version of the remote DVR 50 PDR mobile for OS Appendix B DVR Name Service DVRNS Overview Using Static IP addresses in LAN WAN networks requires high management overhead and increases the cost burden to users Therefore 1t has become essential for DVRs to support Dynamic IP addresses in ADSL VDSL networks using DHCP Dynamic Host Configuration Protocol This reduces cost burdens and increases cost effectiveness for system users Use the following steps to set up a system using DVRNS System Configuration STEP 4 ppoopoppoooes DE ajajajaja lojololo N A RASplus STEP 2 STEP 3 DVRNS Server STEP 1 STEP 1 DVR gt DVRNS Server Register the unit name and IP address of the DVR during the DVRNS setup on the Remote DVR This unit name and IP address will be registered on the DVRNS server directly NOTE Refer to the applicable manual for each remote DVR for more details on DVRNS setup STEP 2 RASplus DVRNS Server Request the IP address of the remote DVR using the registered unit name of the DVR you want to connect to STEP 3 DVRNS Server RASplus The DVRNS server notifies RASplus of the requested IP address STEP 4 RASplus DVR Connect to the target DVR using the IP address returned from the DVRNS server
35. ack recorded video fast backward or fast forward e EI O Move to the Previous Image Next Image Moves to the previous next image frame This function is not supported in portrait e Ey Event Search Allows you to search for a specific event If the device is a network camera or network video transmitter not all events are searched but only the events that occurred while recording on an SD memory card is enabled This function is not supported in landscape 65 User s Manual Calendar Search Allows you to search for recorded video of a specific time This function is not supported in landscape e Camera Displays a list of camera channels In landscape tapping and holding the screen displays a list of camera channels Tapping a channel displays recorded video from that camera Y Received Data Displays the data volume This function is not supported in landscape Search by Event Tapping the Ey Event Search button in the search and playback mode allows you to search for a specific event If the device 1s a network camera or network video transmitter not all events are searched but only the events that occurred while recording on an SD memory card is enabled NOTE This feature is NOT supported for PC based devices A list of events that occurred during the defined time on the same date as the aa recorded video on the current screen is displayed supported only for Alarm In Motion Detection and Video Loss e
36. an monitor remote sites by using the map Refer to 3 2 Panel Map Panel section for details 56 PDR mobile for OS Appendix D Monitoring Using Mobile Devices NOTE The following programs might not be supported depending on the specifications and version of the remote DVR RAS Mobile for PDA RAS Mobile for PDA allows you to access remote sites and monitor live video using the Windows Mobile based PDA anytime from virtually anywhere NOTE The RAS Mobile for PDA installation file is provided on the RASplus installation CD and can be installed if RAS Mobile for PDA is supported for the remote DVR PDA system requirements for using the RAS Mobile program are e Operating System Microsoft Windows Mobile 5 x 6 x e Processor ARMv4 Core compatible processor e Display 240x240 pixel 320x240 pixel or 640x480 pixel e Memory 4MB of storage memory 96MB or more of RAM e Wireless LAN Support IEEE 802 11 e Input Device Touch screen e Desktop PC Microsoft Windows 2000 Sever 2003 XP with Microsoft ActiveSync 4 5 or above Vista 7 with Microsoft Windows Mobile Device Center 6 1 or above System Diagram PDA DVR Installation 1 Install the Microsoft ActiveSync or Microsoft Windows Mobile Device Center program on the PC in order to install the RAS Mobile program on the PDA You can download the installation file from the following website http www microsoft com windowsmobile en us downloads default mspx
37. aped segments indicate there are recorded data during that time Select a specific hour by clicking the mouse on the desired hour segment NOTE The timetable of the time lapse search panel will differ depending on the model of remote DVR that is connected to RASplus s A AE ADORA NHDOPPHH 2 1800 e 3 se 2009 7 00 00 01 00 02 00 03 00 04 00 05 00 06 00 07 00 08 00 09 00 10 00 11 00 12 00 13 00 14 4 4 4 4 4 d L L 4 4 4 L 4 4 4 123 4 a 5 6 7 8 9 1011 1D 1213 14 15 16 17 18 115 AN cas 19 20 21 22 23 24 25 26 27 28 29 30 31 lt gt The recorded data of all camera channels are displayed by time in one hour segments and a yellow highlighted segment indicates the selected time that will be played back Select a specific hour by clicking the mouse on the desired hour segment and video images will be played back starting with the first image captured within the one hour segment If the remote DVR s time and date have been reset to a time that is earlier than some recorded video it is possible for the DVR to have more than one video segment in the same time range Click the sig Segment button and select the video segment you want to search The active segment will be highlighted with pink and the inactive segment will be highlighted with gray on the timetable E r a A a QA Y DA NNI gt lb sz NOD sx 9 CA 3 2009 07 09 2009 07 10 A 2009 7 00 28 20 00 21
38. arches recorded or archived data on storage used for another DVR then installed in the selected remote DVR NOTE The Search on Other option may not be supported depending on the specifications and version of the remote DVR gt Screen Layout and Frame Layout C E GB ES ES Ls 32 pel las ea gt Ke ay eB RASplus provides multiple screen layout for playback The available formats are single screen quad 1 7 3x3 4x4 5x5 1 32 6x6 7x7 and 8x8 and full screen When in one of the multi view formats clicking the ME or Bh button will move to the previous or next page To view a specific image in the single screen mode move the cursor to that image and double click the left mouse button To return to the previous screen mode from the single screen mode double click the left mouse button in the playback window Clicking Layout Load will apply the selected frame layout to RASplus and clicking YE Layout Setup allows you to set up the user defined frame layout gt Image Processing LO LA tit Le The Image Processing panel allows enhancing played back images using processing controls 15 Blurs the image A Sharpens the image itt Equalizes the image gt Reduces the alias effect that occurs when using the zoom function ES Reloads the original image 39 User s Manual Playing Recorded Audio RASplus will play audio when it is in the single screen layout while playing back recorded video that ha
39. are identified above which may include computer software associated media printed materials and online or electronic documentation SOFTWARE By davwmleacdimna imatalline armor av athawrnas naime the CATIA DE OI do not accept the terms in the License Agreement 12 Enter User Name and Organization and click Next 18 MSXML 4 0 SP2 Parser and SDK Setup Customer Information Please enter your customer information User Name Organization pa o 13 Select Install Now and install MSXML following the instructions i MSXML 4 0 SP2 Parser and SDK Setup Choose Setup Type Choose the setup type that best suits your needs Install Now Install MSXML 4 0 at C Program FilesiMSXML 4 0 Customize Allows users to choose which program features will be installed and where they will be installed Recommended for advanced users Cancel iPDR mobile for iOS 14 Click Close to complete the installation i RASplus Installation Complete RASplus has been successfully installed Click Close to exit User s Manual PDR mobile for OS Chapter 3 Configuration After installing the RASplus software you will find the RASplus shortcut icon f on the desktop Run the RASplus program by double clicking the icon The RASplus program consists of the screen 12 docking panels menu and toolbar NOTE Some panels will not be displayed on the screen in the default frame layout To displ
40. associated with a DVR providing the DVRNS DVR Name Service function Go to the Event Camera AlarmOut AlarmIn tab and set the option for the devices e Event Camera Selecting an event from a drop down list and checking the Watch View Popup box set the Map panel to pop up another screen when an event occurs En Selecting Click from a drop down list and checking the Watch View Popup box pops up another screen by clicking the mouse button on the camera icon on the Map panel regardless of event detection e Event AlarmOut Checking the Switch on off box controls the alarm out remotely by clicking the alarm out icon on Map panel e Event Alarmin Selecting Alarm in Event from a drop down list and checking the Watch View Popup box sets the Map panel to pop up another screen when an alarm in event occurs Selecting Click from a drop down list and checking the Watch View Popup box pops up another screen by clicking the mouse button on the alarm in icon on the Map panel regardless of event detection i Watch View Po IW NOTE The popup camera should be associated with the alarm in device to use the popup function Refer to the Device Setting General Popup camera section for the popup camera association Link Setting Click the x Link button on the toolbar and place it on the screen linked with a sub map Then the Link Map box appears Select the individual link boxes by using the Ctrl key on the keyboard and th
41. ation about the remote site connections and the following Site Information setup window appears Blegntarnation Click the Add button and the following Site Item box appears Site Name IP Address RemoteSite1 10 0 12 170 rre Remote Site Setup Enter the site name and IP address of the Remote Ste Setup DVR connected to the devices you want to include on the map dee Click the Port button and enter the network IP port number diia 8000 to 12000 that matches the value set during the LAN setup on the DVR Check the box beside Use DVRNS to use the DVR Login Setup name service Password NOTE If you use DVR Name Service you can enter the name Confirm password registered on the DVRNS server instead of the IP address EIN password of the DVR and you do not need to enter the network IP port DVRNS Server number IP address e Login Setup Enter the user ID and password for the DVR associated with devices e DVRNS Server Enter the IP address and port number of the DVRNS server which matches the values set during the DVRNS setup on the DVR Port 10000 12000 Default 10088 Clicking the OK button saves the setting Popup Dwell Time Select Popup Dwell Time in the Option menu to set the duration of the Map popup screen displayed when events are detected and the following Popup Dwell Time window appears Popup Dwell Time say Check the box beside Use Timeout and adjust the time out dwell from 1 second to 5
42. ay those panels open the View menu at the top of the screen and select each panel from the menu s RASplus Remote Administration System Plus HemoteSitel Sytem Yew Gane Emvorta Sagunce Reed msye Lacie bib Bao Ena rara aS 00d aa 8 Riot Sites ox O e p a 5 By Perote ie EG Aemotests a Gig RermoteSte k Gig Hemolebts E Remote Stet a Fevurde Stes PTE Coriri ox Aw 10 a on 90008 oa pd he ME Watch Evert View ax Se Evert Date Tire A i PercteSRe2 ES cam 05 15 2008 22 28 50 Ujhenstaste E om 15 200 22 20 47 i jRemoteste fF can 06152000 22 20 45 i Rerectesene can 06 15 2008 22 28 45 i Remoteskez E coa 06 15 2000 22 28 43 1 Mereteseez F can 06 15 2008 22 03 i RemoteStnt amp cam tie 5 200 22 2042 i PercteSRe2 can 05 15 2008 22 2040 Uhr 3 can 06 19 3008 72 38 40 lp ran Mind A 77 NN w F Wach Evert Views E Emergency Evert View E Seach View mun 3 1 Screen The Screen displays images from selected cameras in the live monitoring or playback modes RASplus provides various multi screen layouts single screen quad 1 7 3x3 4x4 5x5 1 32 6x6 7x7 8x8 and full screen User s Manual NOTE There might be a problem with screen display or screen update due to low image transmission speed when using Microsoft Windows Vista or later operating system In this situation it is recommended that you disable the Auto Tuning capability of your computer Run the Command Prompt with elevat
43. d of the IP address of the DVR on the Map panel and the following Name Table setup window appears Name Table Click the Display Name field of each IP address and enter the name of the End Diana DVR to display on the popup screen 10 0 12 170 Device Setting Selecting the 2 B or buttons on the toolbar displays the Camera AlarmOut and Alarmin tabs under the Image Bar Select the icons and drag and drop them at the desired locations on the background image Go to the Property Camera AlarmOut Alarmin tab and set the device information Property Camera a General Mame Description Site Informati Custom Image Dome Camera Ratio 100 2 Coordinate 102 Y Coordinate 6 Horizontal 39 Vertical 39 a Equipment User Password Camera Mo OVANS Use Yes E DYANS server Addre server Fort Mame 54 General Name Enter a device name Description Enter description of the device Site Information Select a proper site for the device in the list and the Equipment fields User Password IP Address and Port are filled automatically with the information set in Site Information Setting Image Select an image of a device Ratio Adjust the size of the device image X Coordinates Y Coordinates Adjust the position of the device image by clicking each field and changing the numbers Horizontal Vertical Adjust the size of the device image by clicking each field and changing the numbers Popup camer
44. dition Like to search for logs that include the entered keyword or Not Like to search for logs that do not include the entered keyword Clicking the Add Condition button allows you to add more search conditions Selecting AND searches for logs satisfying all conditions Selecting OR searches for logs satisfying at least one of the conditions e Search Displays log entries satisfying the preset search filter e Reset Resets the search filter File Help e Log File Open Opens a log file db Log File Open e Delete Log Deletes logs older than a certain age ebisilos e Save As Saves the log information in the list as a text txt or CSV csv file E e Print Prints the log information Print e Close Closes the Log Viewer screen Close 26 PDR mobile for OS gt Exit Disconnects all current connections and exits RASplus program View Menu em View emote Favorite Sequence Record Image Layout Help jalea Remo Toolbar gt Site Panel gt PAYA ontrol Panel gt C Watch Event View Panel Emergency Event view Panel Search View Panel Report View Panel Status View Panel NDSAR Displays or closes the toolbar and panels Remote Menu en Remote Fa rite Sequence Record Image Layout He Sa Remote Setup Remote System Log Re Remote Event Log NOTE The Remote menu can also be activated by clicking the right mouse button after selecting the remote site on the Remote Sites panel
45. dix B for more details on DVR Name Service e Startup Settings Select Reselect Language on Next Startup to change a language when RASplus starts Select Automatically Run RASplus When to Log on to Windows to run RASplus automatically when logging onto Windows e Remote Desktop Option Select Use the default password for remote desktop connection and enter the password to use the same password for every remote site when connecting to remote sites using the VNC function In this case the password registered in the Remote Desktop Setup setting during the remote site registration will not be used This setting will be used when every remote site uses the same password for the VNC remote connection 19 User s Manual _System 1 System 2 Remote Sites Favorite Sites Sequence Sites Group List Remote Site List A RemoteSites ea Remotesite 1 ea Remotesite2 ea RemoteSite3 Address Use Modern Use DYANS Admin Port Watch 10 0 17 102 Off 8200 8016 10 0 113 191 Off 8200 8016 10 0 113 47 Off 8200 8016 List All Remote Site Configures the connection list for remote access e Add Click the Add button and enter the information about the remote site you want to add Add Site Reference Group E RemoteSites Device Setup Remote Site Setup Login Setup Remote Desktop Setup Port Password Confirm Password Emergency Event Instruction 20 Reference Group The site should be assi
46. e displayed currently on the Search Screen for example when an object disappears 41 User s Manual e Sensitivity Sets the sensitivity of the change detection The higher the number is the more sensitive it is e Num of diff block Sets the minimum number of blocks that must be activated to be considered as a change Motion Search only e Diff to ref image Sets the minimum proportion of blocks that must be activated to be considered as a change Museum Search only e Activation Time Sets the duration that the change must last to be considered as a change Museum Search only Ifa change is detected but does not last as long as the Activation Time the change is not considered as a change e 2 Detection Area Select Clear Sets the detection area on the Search Screen by selecting or clearing blocks e Search Stop Starts or stops searching The last recorded image is displayed on the Search Screen e Next Searching stops when the search results reach 100 Clicking the button continues searching e Reset Resets the search condition 4 3 Additional Functions Save Clicking the 4 button on the toolbar saves the image currently displayed on the screen as a bitmap or JPEG file By placing a checkmark in the box beside Include Image Info text information about the site will be included when saving the image Print Clicking the button on the toolbar prints the image currently displayed on the screen on a printe
47. e from the Auto Sequencing list and click the Remove button e Remove All Removes all sites in the Auto Sequencing list NOTE The Auto Sequencing list is not valid with modem connections gt Load Setup File Allows applying the settings of the System Setup menu saved as a xml file format to the RASplus system Loading the setup file can also be performed by clicking the la button on the toolbar 23 User s Manual Save Setup File Allows saving the current settings of the System Setup menu as a xml file format If you select specific remote sites 1t only saves the settings for the selected remote sites Saving the setup file can also be performed by clicking the Hg button on the toolbar gt Batch Job Setup Allows upgrading or setting up multiple remote DVRs using the Batch Job Setup screen BatchJob Setup Upgrade Setup Group List Upgrade Sites oa E RemoteSites E RemoteSite1 ES RemoteSite2 E RemoteSite3 Add All Remove All Upgrade Now Upgrade Sets up the remote upgrade job for remote sites First select the remote sites to upgrade from the Group List and add them to the Upgrade Sites list by clicking the Add button Then click the Upgrade Now button to initiate the remote upgrade job for listed Upgrade Sites e Add Select the site to add from the Group List and click the Add button Add All Adds all sites in the Group List to the Upgrade Sites list e Remove Select the site
48. e installed en your Pocket PL new README for RAS Mobile 3 14 for Windows Mobile SYSTEM REQUIREMENTS Openting System Micrarort Lilla Lette 5 or abowe ARMM Cane compalible poo I A DAA pie 4400040 piel or SAO DOE wel Memory JME of storage memory ME of RAM or more Betklop PG Microsoft Windows 21000 eve 20050 biih Microsedl Active tyne 4 5 or above Vita fein Mbrra soft Windows Mebile Device Cember l er above IMPORTANT NOTE pre Program Shortout Location Start Menus Mobile J L Installing Applications Inslalling OVF RAS Mobile 3 14 AAA AAA AAA Some Cu 6 When the following dialog box appears click the OK button Now you can install the RAS Mobile program on the PDA Application Downloadina Complete Please check your mobile device screen to see il additional steps are necessary to complete this installation 7 Check the PDA screen You will be asked whether or not to install the RAS Mobile program on the PDA Click the Install button at the bottom of the screen and the RAS Mobile program is installed on the PDA Default installation folder My Device Program Files RAS Mobile 3 1 4 8 Run the RAS Mobile program on the PDA by double clicking the RAS Mobile icon amp on the desktop screen or running the RAS_Mobile_Setup exe file in the installation folder NOTE To remove the program select Start on the Task Bar on the PDA Goto Settings System Control panel Add Delete programs
49. ecting the User Assignment Setup mode the user can assign camera channels to record manually on the Watch screen Select a camera on the Watch screen and click the right mouse button then select Set Record Camera in the text menu screen The gray fj icon displays on the selected camera screen System 1 System 2 Remote Sites Favorite Sites Sequence Sites security Option Verify Password Before Setup C Before Startup C Before Shutdown Network Option Callback IP Port Number 8201 8000 12000 PC Based DYA Upgrade Port 8300 8000 12000 Report Setup Report Use Use Report Report Check Interval 1 1 24 hours DYA Name Service Server IP Address server IP Port Number 10088 10000 12000 default 10088 Startup Settings Reselect Language on Next Startup C Automatically Run RASplus When to Log on to Windows Remote Desktop Option Use the default password for remote desktop connection OK J Cancel 18 iPDR mobile for iOS System 2 Set up the modem connection information for remote access system password network option report function and DVRNS server e Security Options Designate whether password confirmation is required Before setup Before startup or Before shutdown of RASplus Click the Change button to change the password e Network Option Set up the IP port number that is used for network connection when receiving a callback message from a remote site and the upgrade port
50. ed administrator permissions Go to the Start Menu All Programs gt Accessories gt Command Prompt Click the right mouse button and select the Run as administrator option Then enter netsh int tcp set global autotuninglevel disable and click the OK button Restart your computer to apply the changes If you want to enable the Auto Tuning capability again enter netsh int tcp set global autotuninglevel normal after running the Command Prompt with elevated administrator permissions Restart your computer to apply the changes 3 2 Panel RASplus has many powerful tools that can be used to streamline your work Most of the tools are located on 12 docking panels that can be placed on the screen where they are most convenient You can keep your screen free of clutter by displaying only the panels you use most frequently Clicking the icon at the upper right corner of a panel enables the auto hide feature Tabs for auto hidden panels are displayed on the edge of the screen Scrolling over an auto hidden panel tab will cause the panel to fly out You can cause the panel to lock back into its original display position by clicking the icon Clicking the icon hides the panel without a tab Hidden panels can be displayed by selecting them from the drop down menus Panels can be resized moved and combined with other panels creating a workspace that fits your needs To resize a panel scroll the cursor over the edge of the panel unt
51. emote Sites Favorite Sites Sequence Sites Favorites site Name Auto Connect Favorites Group List Favorites a RemoteSites W Cam4 W Cams W1Cam7 WJCam8 e RemoteSitel e Remotesite2 Remove Selected Camera Selected Camera Remove All Cameras ll Cameras 21 User s Manual Favorite Site The Favorite Site is a user defined connection list that combines more than one remote site so multiple sites can be monitored at the same time with a single connection Add a new Favorite Site and define it by dragging and dropping sites and or cameras to the Favorites map Up to 64 cameras can be monitored at a time when each camera is assigned to its own position on the Favorites map e Favorites Site Name Select a registered Favorite site from the drop down list ADD Adds a new Favorite site Clicking the button displays the Favorites dialog box Enter the name of the Favorite site to add and Select the desired screen layout used when the Favorite site is connected Change Select the Favorite site to change from the Site Name list and click the Change button Then change the site name or screen layout Remove Select the Favorite site to remove from the Site Name list and click the Remove button e Connect Favorite Site at startup Select whether or not your favorite site is automatically connected when RASplus starts e Remove Selected Camera Removes selected cameras from the Favorites map Cameras ca
52. en adjust the size and position of the link box using a mouse a keyboard or the icons shown below e Interval adjustment Equalizes the distance between three or more selected boxes a E e Size adjustment Equalizes the size of two or more selected boxes Clicking the arrow keys while holding the Shift key on the keyboard changes the size of the selected boxes aH fol fal fe e Position adjustment Arranges two or more selected boxes towards one direction a or towards the center Clicking the arrow keys while holding the Ctrl key on a keyboard changes the position of selected boxes e Cut Copy Paste Cuts copies or pastes the link box 99 User s Manual Go to the Property Link tab and set the properties of the selected link box x Name Enter a name of the link box e Image Double click the field and select an image to insert in the link box E General e Link Document Double click the field and select a map to be linked with the link box Link Map e Ratio Adjust the image size within the link box i coer e X Coordinates Y Coordinates Adjust the position of the link box on the screen Ratio 100 by clicking each field and changing the numbers er e Horizontal Vertical Adjust the link box size by clicking each field and changing Horizontal 100 the numbers vertica e Text Show Select Yes to display the name of the link box on the selected image Clicking the fj Save button on the toolbar saves the map You c
53. ents are detected by a disabling the dwell time out o Original Ratio Displays the Map popup screen by matching its original aspect ratio Anti Aliasing Screen Enhances image display quality on the popup screen by smoothing v Original Ratio stair stepping aliasing effects in the enlarged image sido iii User Set Sets the mode of the current popup screens displayed on the monitor For example the monitor displays the current popup screen with enough frames for 16 cameras when you select 4x4 x2 Disable Time out NOTE Refer to Appendix C Map Editor Device Setting section for more details about the popup function To connect to the remote site select the device you want to connect to from the Map panel and then drag and drop it in the desired position on the screen or the Status View panel Also placing the mouse cursor on the device on the map displays the device status When the device detects any event or the device is not working properly the following status icons appear maximum of 4 Unplugged y Event Off Irregular FM Video Loss s Video Blind Z Motion Object Detection Audio Detection Ip Alarm In d Alarm Out Video Analytics Detection 3 Trip Zone Tampering NOTE The device status is displayed as Irregular based on to the system check settings and as each event according to the event detection settings on the remote DVR NOTE Some status icons may not be supported depending on the specifications
54. error message will be displayed in the Status Information box e Add Click the button to add the remote site Remote Sites Ste nine adress Use DW Sitel 203 238 93 3 Off Site Name Enter a site name to use in the RAS Mobile program Up to 32 characters may be used for the site names She Mamo EN F Aji SUES Wate Ret fais IP Address Enter the IP address of the remote site If the remote DVR uses the Erne DVRNS function check Use DVRNS and enter the remote site s name registered Lier tb Pmsnordi er on the DVRNS server instead of the IP address The name you enter should match Eu ee the name set during the DVRNS setup on the remote DVR Watch Port Set up the port number of the Watch program The IP port number of Watch Port should match the value set during the network setup of the remote DVR User ID Password Enter the user ID and password The user ID and password you enter should match the user ID and password used to log on to the DVR If you have entered a user ID and a password the site will be connected automatically Up to 32 characters may be used for the user IDs and up to 10 characters may be used for passwords NOTE The RAS Mobile program might not work properly when connecting to the remote site via Microsoft ActiveSync or Microsoft Windows Mobile Device Center 59 User s Manual Camera Displays the camera buttons Click the desired camera button
55. f internal storage e Network Wi Fi or mobile network 3G supported by BlackBerry mobile device System Diagram DVR NETWORK Installation 1 Run the App World application in the mobile device 2 Enter RAS Mobile in the search field of the App World application 3 Install the RAS Mobile program and run the program Details e RAS Mobile i tti Download TEREE Tamil Sch RAS Mobile e Camera Reviews Recommend Screenshots Stay on top of your security with RAS Mobile for BlackBerry sra nro barna Tite Fenn salen on sp Ll NOTE If you want to remove the RAS Mobile program go to Downloads folder Select RAS Mobile and push the menu button of the mobile device and select Delete CAUTION This program uses large amounts of data and you are responsible for all data charges Please contact your service provider s customer service to confirm or add an unlimited data plan 67 User s Manual Operation l gt 4 68 Run the RAS Mobile program Push the Menu button of the mobile device and the following default menu is displayed e Add New Site Delete Site Tap to register or delete devices e Setting If the device uses the DVRNS function set up the information about the DVRNS server You can also enable or disable the built in BlackBerry media player e About Tap to check the information about the RAS Mobile program Add New Site Delete Site Setting Ab
56. gned to a Reference Group for effective management of multiple remote sites Click the Add button to create a new reference group Device Setup Select the system of the remote site to register When registering an IP camera select IP Camera Remote Site Setup Select PC Based DVR when registering a DVR at the remote site that 1s PC based Enter a site name and the IP address of the remote site modem telephone number for dial up connections acquired from your network administrator Click the Port button to set up the IP port number of each program The IP port number should match the value set during the network setup of the remote DVR Ifthe remote system version does not allow you to set the IP port numbers use the following values 8200 for Admin 8016 for Watch 10019 for Search and 8116 8115 for a PC based DVR for Audio Select the number of cameras at the remote site For example selecting 8 from the list when registering a 16 channel DVR displays video of the first 8 channels on the screen iPDR mobile for iOS NOTE If the DVR uses the DVRNS function place a checkmark in the Use DVRNS box The P Address field will be changed to DVR Name and you can enter the name of remote site registered on the DVRNS server The DVR name you enter should match the name set during the DVRNS setup on the remote DVR Login Setup Enter the user ID and password The user ID and password you ente
57. h camera screen when audio communication is available between the RASplus system and the remote site Sje x 33 User s Manual If you want to send audio to the selected remote site click the j button and talk into the microphone If you want to monitor live audio from the selected remote site through the attached speaker click the 14 button Clicking both 3 button and 14 button allows two way communication Clicking the button disables audio communication If the remote DVR allows you to select an audio channel to monitor HA from the RASplus system clicking the button displays the Select Audio Channel dialog box Select a camera channel associated with an audio channel to monitor and click the OK button a Lx Select video channel to associate with audio Sequence Monitoring Clicking the E button on the toolbar and selecting a desired Auto Sequencing group connects to the registered sites sequentially allowing connection to more than one remote site and displays images from selected cameras Clicking the button during sequence monitoring releases sequence monitoring and maintains the current connection For sequence monitoring to function the sequence sites should be registered during System setup Refer to 3 3 Menu System Menu for details on configuring the sequence site NOTE While in the sequence monitoring mode you cannot manually connect to sites by dragging and dropping with the mouse Col
58. h or iPhone TPDR mobile D General Mame Sie Connection Info Address 132 168 0 1 DVANS OFF Watch For 8016 soarch Port 10019 Audio Port 6116 Login Info ddesg DOWANS Waich Por Search Port Audio Port Login Info User 1D Password 192 168 0 1 OFF 8016 10019 A116 admin Delete Site 73 User s Manual Editing Device s information or deleting a Device on iPad iPDR mobile HD Address Walch Port Address 192 168 0 1 Search Port DVANS OFF Watch Port 8016 Search Port 10018 Audio Port 8116 Login Info User ID admin Password sseseees Monitoring Select a device from the device list and a menu is displayed Tap Watch Video from the device is displayed on the screen e Site List Releases the connection to the device and returns to the site list e Screen Tapping a camera screen displays video from the camera in single screen layout Dragging the screen moves to the previous or next camera group as long as there is video for the groups in the current screen layout Layout Changes the screen layout Tapping the button changes the layout in the following order single screen quad 3x3 or 4x4 The available layouts vary depending on the mobile device single screen only for iPod Touch single screen and quad for iPhone single screen to 3x3 or 4x4 for iPad e L T Camera Displays a list of camera channels in single screen layou
59. icates that the remote DVR is in the panic recording mode and you can stop panic recording by clicking the button NOTE Remote Panic Control may not be supported depending on the specifications and version of the remote DVR Status Display Window The Status Display Window displays the event alarm out system check and recording status information of the remote system connected to the Status View panel in real time NOTE Depending on the specifications of the remote DVR status display may not be supported e Event Displays event Motion Detection Alarm In Object Detection Video Blind Audio Detection Trip Zone Tampering The status display of event detection will continue during the preset dwell time of the event driven recording 44 iPDR mobile for iOS O Ej oS E Fd EN Event Detection Ha A oS E 4 EM No Event Detection 8282 GG Evn of e Alarm Out Displays status of the alarm out signals 9 Alarm Out 9 No Alarm Out fe Alarm Out Off e System Check Displays the function status of the camera alarm and recording A E Et Normal El A E irregular EN l E System Check Off e Record From To Displays the record period e Status Displays the recording playback archiving clip copy status Oe i on E BeBe or e Version Displays the system version information 45 User s Manual 46 PDR mobile for OS Appendix A Reviewing Video Clips You do not need to install any special software on you pe
60. iew Remotesite 1 hx 2 r 1 0 o MARSA KIO Jeeg E Y E 2009 07 09 2009 0750 a Sd BIEI 21 00 2200 02 00 03 00 04 00 e C 1234 er 5 6 7 8 93101 CAM be tele ete ee ee SSS 2 P gt 3 26 27 28 29 30 31 4 K Watch Event View at Emergency Event Mara El Benmi wizy B Search View RemoteSite The Search View panel consists of playback and search controls time lapse search table and event search table The playback buttons on the Search View panel perform the following functions as described below K Go to the First Image K Fast Backward Play Go to the Previous Image LJ Stop Play Go to the Next Image b Fast Forward Play D Go to the Last Image NOTE The speed of fast forward depends on network bandwidth and the number of images per second recorded You can control the playback speed of images that are currently being played back by using the a x 1 0 control slider You can control the fast forward or fast backward playback speed of images that are currently being played back fast forward or fast backward by using the Hi x2 control slider You can display the selected image on the screen in its original size by clicking the button Clicking the button again displays the image in the preset aspect ratio You can enlarge a specific part of the image up to five times using the J control slider The user can electronically pan and tilt within the enlarged image by dragging the image usi
61. il the cursor changes to gt or Then click the left mouse button and drag the panel border to enlarge or reduce its size To move a panel to a different position on the screen scroll the cursor over the title bar of a panel that has not been auto hidden until it changes to P Once you click and drag position arrows will display on the screen The four position arrows along the outer edges allow you to place the panel along the given edge independent of the other panels When you drag the panel over a position arrow a transparent blue box will display showing the new panel position If you are satisfied with the position release the left mouse button and the panel will move to its new position You can also move a panel so that it is associated with another panel To do this drag the panel over the panel you want it associated with and the icon with four position arrows will center over that panel Scrolling the cursor over the icon arrows will cause a transparent blue box to display where the panel will be located If you are satisfied with the position release the left mouse button and the panel moves to its new position It is possible to combine panels so that they take up less space on the screen Combined panels have a row of tabs across the bottom Clicking a tab brings that panel to the foreground To combine panels move the cursor to the title bar of the panel you want to move Click and drag the panel onto the panel you want to
62. ile limit NOTE If you want to save the recorded data without including the Self Player program select Exclude Player If you select this option the file size will be smaller and it will take less time to save but you will need to run the Self Player program which is included on the RASplus installation CD to play the saved file This feature may not be supported depending on the specifications and version of the remote DVR NOTE The Save As Self Player dialog box will differ depending on the specifications of the remote DVR Save As Self Player can be performed by using the button on the Search View panel Selecting the desired time on the timetable and clicking the button sets the starting date From and selecting another time and clicking the button again sets the ending time To e Save As Video Saves any video clip of recorded data in an AVI Audio Video Interleaved file format Set up the save parameters in the following dialog box Click the Start button and then set the file name Clicking the Save button starts saving video 40 Save As Video To Last 10 43 18 A 10 43 18 s iPDR mobile for iOS NOTE Selecting Include Audio Data includes audio data when saving video with recorded audio This option is not available when more than one camera is selected NOTE When the data file reaches 2GB saving stops Selecting Limit File Size and adjusting the maximum file size cau
63. ime and you can select which cameras are to be recorded during the System setup Clicking the button on the toolbar initiates the Record Player program and plays video saved in the recording folder designated during the System setup The Record Player GUI and its controls are almost identical to the Clip Player Refer to Appendix A Reviewing Video Clips Clip Player If you want to play back video saved in another recording folder run the Record Player program first Move to the Start menu in Windows Then select RecordPlayer from the RASplus options and select the recoding folder path you want Recorded video can be saved as a bitmap or as an executable file using the save function of the Record Player NOTE Panic recording will be available only if you select Use Recording and it is set up in the recording options during the System setup NOTE The date and time displayed on the Record Player indicates when the recording was made on RASplus NOTE The icon will display on each screen when panic recording starts NOTE Audio recording is not supported 43 User s Manual 4 5 Status View RASplus provides a status display remote setup system log and event log view of the connected remote site in real time To display a status of the remote site select a camera or a site from the Remote Site list and drag it to the Status View panel You can also select Connect Status from the popup menu displayed by clicking the right
64. ing them oa to the screen size and selecting Original Ratio displays images by fitting them within the screen size while maintaining their original ratio Anti Aliasing Screen When using the option the image display quality on the screen will be enhanced by eliminating stair stepping aliasing effects in the enlarged image Use Slow Connection Draw Mode When using the option in slow network environments such as ADSL and connecting to a remote site in the live monitoring mode the time taken to display the first image on the screen will be reduced Drawing Mode Fast Drawing YUV420 Fast Drawing RGB32 Use Slow Connection Draw Mode NOTE If the image cannot be displayed properly because of your PC s specifications lower the drawing mode level NOTE While in the Fast Drawing mode the drawing speed might decrease when the RASplus screen is not located on the primary monitor NOTE Overlay drawing mode may not be supported depending on the type of video card installed in your PC Video cards with an ATI chipset are recommended NOTE When using dual monitors selecting Overlay drawing will display the image only on the primary monitor NOTE When using a low end computer image drawing speed might decrease while using a deinterlace filter depending on the type of deinterlace filter NOTE When using a low end computer image drawing speed might decrease when the Anti Aliasing Screen option is selected
65. inter connected to your computer The Backup File Information window displays information regarding the backup file Location displays the site description of the DVR where the backup was made Record displays the time span of the video backup file Encryption displays whether the backup file has been tampered with Normal means the file has not been tampered with Wrong means the system has detected tampering and no mark means the user cancelled the encryption check 47 User s Manual The Current Image Information window displays information about the current image Camera Title displays the camera name of the current image and Time displays the date and time the image was recorded The Image Search Slide Bar displays the current playback position The user can move to another image by clicking the mouse and dragging along the slide bar The Playback Function Buttons include fast backward backward play pause fast forward go to the first image go to the previous image go to the next image and go to the last image buttons The Brightness Control Slide Bar adjusts the brightness of the backup images by clicking the mouse and dragging along the slider bar Minute brightness change can be made using the J and icons located at each end of the bar The Brightness Revert Button reloads to the original image Clicking the OSD On Screen Display Button switches the OSD option The OSD information includes camera location and date ti
66. me Clicking the Mute Button mutes the recorded audio Double clicking the Player logo at the top left corner while holding the Shift key switches video formats when you are experiencing improper image display Clip Player NOTE It is suggested that the computer used for the Clip Player program has at least an 800MHz Pentium Ill Intel Pentium Dual Core 2 2GHz recommended If your CPU is slower than this video clips recorded at maximum speed with very high image quality will be played back slowly Also DirectX 9 0 or higher is required to install and the VGA card with 16MB or higher video RAM is recommended for proper operation NOTE If you selected the Save Password option when saving recorded video you will be asked to enter the password to initiate the Clip Player program NOTE If you selected the Exclude Player option when saving recorded video you must run the Self Player program which is included on the RASplus installation CD to play the saved file RemoteSitel Clip Player CAM I Hi 4H dl gt A come Pees The ClipPlayer Screen displays the clip images 48 iPDR mobile for iOS NOTE Proper image display depends on the display settings of your PC If you are experiencing display problems click the right mouse button on the background screen and select Properties Settings then set the Color quality to 32 bit Then select Advanced Troubleshoot and then set the Hardware Acceleration to Fulf
67. me click the g Go To button and set up the date and time to search gt Event Search site Date Time aj ARemote site 08 30 2006 21 32 59 i Remote site 05 30 2006 21 32 56 i Aemote site 06 30 2006 21 32 50 i Remotesite 06 30 2006 21 32 46 3 Remotesite 08 30 2006 21 32 45 i Remote site 05 30 2006 21 32 39 i Remote site 06 30 2006 21 32 37 Click the 2 button on the Search View panel to enter the event search mode First click the button and set up the search condition in the following Event Search dialog box Event Search Event Text In iFirst Last a ro a E on nm Y Recorder Bad Y Alarm In Bad Y Disk Bad Y Disk Temperature Y Disk 5 M 4 R T Y Panic Record Y Disk Almost Full Alarm In Motion Object Detection Video Loss Video Blind Camera Aa E dE EEE E HEA dada a daa aa E da E E E dE E Y E E dE E E E E REE EA E dE E E E KICKS MCS He eee E Hee KSC CSCS CSN Hee eees HEE eeeo Hee E gt Text In Event Search Event Text In From To W Last al ER 25 bs Se IO ile 12518 14 15 16 Chamels MW M AAAA MAAA A Name Comp Value Column Line y A To o NOTE The Event Search dialog box will differ depending on the specifications of the remote DVR NOTE The Text In Event Search Text In tab search may not be supported depending on the specifications and version of the remote DVR
68. mera group if there is recorded video in the next camera group in the current screen mode Click the r icon to set up the Clip Player properties Print e Print Prints the current image aes e Frame Info Displays Channel Title Time Type Size and Resolution information about Image Processing the image Play Speed Control e Image Processing Controls brightness blur and sharpness of playback images Single Drawing Mode Screen Layout and Pause Mode Only Screen Size Play Speed Control Changes the playback speed Play or fast forward backward playback Aspect Ratio E speed FF RW Drawing Mode Selects the draw mode level If you are not sure about the best draw mode level for your system try each level until the image displays properly Screen Size Changes the Clip Player screen size Aspect Ratio Changes the image aspect ratio displayed on each camera screen OSD Setup Selects options to display on the screen Enable Audio Plays audio while playing back recorded video that has recorded audio Single Screen Layout Only Anti Aliasing Screen Enhances image display quality on the screen by smoothing stair stepping aliasing effects in the enlarged image If video plays slow because of your CPU s slow speed releasing the Anti Aliasing Screen option might improve playback speed Show Text In Displays video with text in data if the video was recorded with text in data Single Screen Layout Only w Enable Audio
69. minutes Selecting Display remaining time displays the remaining time out dwell on the Map popup screen Use TimeOut i A al NOTE Popup Dwell Time will be applied to all maps displayed on the map panel Status Color Setting Select the Status Color Setting in the Option menu and the following Status Color window appears You can set the device to display a unique color reflecting its status on the Map panel 53 User s Manual Check the box beside Color Use and select each status box to use Click each selected status box and select the desired color When done click the OK button Unplugged Either connection to the remote site has failed or Device No for the device is not supported by the remote site Event off Event detection function is not set up Irregular The device is not working properly Video Blind Video Loss Motion Object Detection Video Analytics Audio Detection Trip Zone Tampering The event is detected Alarm In Alarm in is detected Alarm Out Alarm out is detected NOTE Devices are displayed as rregular based on the system check settings and as Video Blind Video Loss Motion Object Detection Video Analytics Audio Detection Trip Zone Tampering Alarm In and Alarm Out based on the event detection settings on the remote DVR NOTE The device displays mixed color when detecting more than two statuses at the same time Name Table Select Name Table in the Option menu to display the name instea
70. mouse button after selecting the site from the Remote Site list Function Buttons Disconnect Disconnects the current connection on the Status View panel NOTE If you want to connect to another site disconnect from the currently connected system on the Status View panel first by clicking the button Remote Setup Allows changing the setup of the remote DVR connected to the Status View panel NOTE Refer to the manual for each applicable remote DVR for more details on system setup E Remote System Log Displays the system log information of the remote DVR connected to the Status View panel 3 Remote Event Log Displays the event log information of the remote DVR connected to the Status panel NOTE Refer to 3 3 Menu Remote Menu for more details on the S S S S S S S S S ejeje eje E Rec From 02 21 2010 09 35 13 Rec To 03 03 2010 21 50 35 Status Version Remote System Log and Remote Event Log NOTE When the remote site is not connected to the Status View panel Remote Setup Remote System Log and Remote Event Log menus can be accessed by clicking the right mouse button after selecting the remote site on the Remote Sites panel Remote Panic Control Controls the panic recording of the remote DVR connected to the Status View panel The E On button indicates that the remote DVR is not in the panic recording mode and you can start panic recording by clicking the button The Off button ind
71. n also be removed by clicking the right mouse button after selecting the camera e Remove All Cameras Removes all cameras from the Favorites map NOTE Cameras can be selected by clicking the left mouse button on the camera in the Favorites map Selected cameras will be outlined in red Clicking the left mouse button on the camera while holding the Ctrl key toggles camera selection On and Off Multiple cameras can be selected by clicking the left mouse button while holding the Shift key NOTE W Watch Screen and S Search Screen displayed to the left of the camera number indicates the display option of each camera The display option can be selected when registering a Favorite site Selecting the remote site from the Group List and dragging and dropping it to the Favorites map using the right or left mouse buttons This is user defined and must be set during System setup displays the text menu screen Select the desired display option between Watch Screen and Search screen If you do not select the display option Watch Screen display will be assigned to all cameras of the registered Favorite site by default NOTE Clicking the 37 button on the toolbar will save the current screen layout of the Watch screen or Search screen directly to the Favorite site NOTE The Favorite Site list does not work with modem connections 22 iPDR mobile for iOS NAY E S System 1 System 2 Remote Sites Favorite Sites Sequence Sites
72. n the first cell of the new layout When in one of the multi view formats clicking the ME or BY button will move to the previous or next page es Clicking Layout Load will apply the selected frame layout to RASplus and clicking Layout Setup allows you to set up the user defined frame layout 31 User s Manual 32 iPDR mobile for iOS Chapter 4 Operation 4 1 Live Monitoring RASplus provides remote monitoring functions for viewing video images in real time from either a single site or multiple sites In addition when events are detected at a remote site while in the live monitoring mode RASplus displays the event information on the Watch Event View panel In order to perform live monitoring the display option must be set to Watch Screen or Watch and Search Screen during System setup To connect a remote site on the Watch screen select the site or camera you want to connect to in the Remote Site Favorite Sites or Map panel and then drag and drop it in the desired position on the screen The A icon will be displayed on each Watch screen To disconnect the current connection select the site or camera you want to disconnect to in the Remote Sites Favorite Sites or Map panel or on the screen and then click the button on the toolbar or select Disconnect from the System drop down menu NOTE Some DVR models will only transmit images to the RASplus system while recording video NOTE When selecting the displa
73. nections Disconnection can also be performed by clicking the button on the toolbar gt View Log Displays log information saved in the RASplus system NOTE You can also display the Log Viewer screen by selecting Log Viewer from the RASplus options under the Start menu in Windows 25 User s Manual zS Log Viewer A AE 23 System amp Emergency d Batch Job Report E Check Emergency Search Time Detail Condition Log Type Log Count da system 5065 l Emergency 10344 daiBatch Job 0 Report 64 OF Check Emergency 1 View Log Displays the type of log and the number of log entries of RASplus Selecting a log type from the list displays all entries of the selected log type and you can search for the desired log by setting up a search filter e Filter Set up the search condition Search Time Set up the time range to search within Selecting Current Time and the desired period searches for logs from the current time and as far back as the selected time span Selecting Detail Time allows you to set up a specific starting and ending time to search within Detail Condition Set up the desired search parameters Select a filter target from the second list and select a filter from the third list enter a filter in the text box Then select a comparison operator from the last list Equal to search for logs that satisfy the condition case sensitive Not Equal to search for logs excluding logs that satisfy the con
74. network connection it may be necessary to set up port forwarding manually on the NAT device or enable the UPnP function in both the device and NAT device Refer to the user manual of the device for details about enabling the UPnP function NOTE If video is not displayed after connecting to the device check that the Use Mobile option was enabled during the RTSP setup in the device PDR mobile for OS PDR mobile allows you to access devices DVRs network video transmitters and network cameras and monitor live video remotely via network connection using the 108 based mobile device iPod Touch iPhone or Pad with 10S 4 0 or later version anytime from virtually anywhere System Diagram iPhone iPod Touch iPad DVR NETWORK s AA L Installation 1 Run the App Store application in the mobile device 2 Enter iPDR mobile in the search field of the App Store application 3 Install the IPDR mobile program and run the program a F _ C ipdr mobile oocoooonaa noocooana TENE A e 70 iPDR mobile for iOS Continue Coni ahaw again iPad CAUTION This program uses large amounts of data and you are responsible for all data charges Please contact your service provider s customer service to confirm or add an unlimited data plan Operation 1 Tap the gs button and enter the device information to register the device 71 User s Manual i
75. ng the mouse Click the left mouse button on the enlarged image and drag to move its position Clicking the button cancels the enlargement and resets the image You can change the brightness of the current image using the J control slider Clicking the button cancels the brightness changes and resets the image NOTE Zoom in out and brightness control work only while in the pause mode Search Mode RASplus supports two search modes time lapse mode and event mode The time lapse search mode searches for recorded data by time and then plays back images found within the time parameters The event search mode searches for event log entries using specific conditions and plays back the images associated with those event entries These two modes have different panel configurations and search methods NOTE Using both search modes at the same time is NOT possible 36 iPDR mobile for iOS gt Time Lapse Search Click the button on the Search View panel to enter the time lapse search mode Selecting a date from the calendar initiates the time lapse search The dates for which recorded images are available are enabled When first entering the time lapse search the latest date with recorded images will be selected highlighted in the calendar Click the Reload button to reload the date information Recorded information available from the selected date will be displayed on the timetable The recorded data are displayed by time and bar sh
76. ntact your service provider s customer service to confirm or add an unlimited data plan Operation 1 Run the aPDR mobile program Push the Menu button of the mobile device and the following default menu is displayed B ez New site Tap to register devices e Delete site Tap to delete a device This menu will be available only when there are devices registered e Settings Tap to edit the settings or check the information about the aPDR mobile program 2 Tap the New site button and enter the device information to register it 62 iPDR mobile for iOS gaes Description Enter the device name to use in the aPDR mobile program psa e Use DVRNS If the device uses the DVRNS function enable the Use DVRNS option You can set up the information for the DVRNS server by tapping the Settings button in the default menu e Address Watch Port Search Port Audio Port Enter the IP address Use DVRNS polls and port number of the device If the device uses the DVRNS function check that the Use DVRNS option is enabled and enter the device name Watch Port registered on the DVRNS server instead of the IP address The name you enter should match the name set during the DVRNS setup on the device search Port e User ID Password Enter the user ID and password The user ID and 100719 password you enter should match the user ID and password used to log on to the device Ifyou want to edit the information for the
77. number that is used for upgrading the PC based DVR Select USe modem if you want to use a modem for remote access NOTE The IP port and upgrade port numbers you enter should match the values set during the network setup of the remote DVR Event Setup Enter the number of emergency events EPEY displayed in the Emergency Event panel Set up RASplus Count of Emergency Event to display to sound when events are detected by selecting events ao 1000 from the list and designating the sound file wave path Event Sound Setup You can set up a different sound for each type of event nt pa Selecting Use Sound Loop continues sounding and you Motion can turn the sound off manually by clicking the OK button tewin Alarm In Bad on the popup screen Disk SMART Recorder Bad Disk Bad Disk Full 000000000 NEN Sound Path CWRASplus WCallback way Find File e Report Setup Set up the Use On or Off and check intervals from 1 to 24 hours of the report function When using the report function RASplus checks on the remote site based on the user defined interval and reports system status e DVR Name Service Set up the IP address and port number of the DVRNS DVR Name Service server The IP address and port number you enter should match the values set during the DVRNS setup of the remote DVR you want to connect to NOTE The DVRNS server cannot be configured when using modem connections Refer to Appen
78. on the specifications and version of the device PTZ Control Tapping the 4 PTZ Mode button enters the PTZ mode and allows you to control the PTZ camera 64 iPDR mobile for iOS Dame H Exit Exits the PTZ mode a wa Move Allows you to move the PTZ camera direction Preset View Displays a list of Presets which you have set in the device Tapping a Preset moves the PTZ camera to the location 9 Zoom Out In Zooms out or in video 9 9 Focus Near Far Focuses near or far e ES El IRIS Close Open Closes or opens IRIS NOTES e Not all PTZ functions above may be supported in landscape e Dragging screen in the PTZ mode moves the PTZ camera in the opposite direction 2 Push the Cancel button of the mobile device to monitor video from other devices The current connection is released and the default menu is displayed Search and Playback Select a device from the device list and a menu is displayed Tap Search Video recorded in the device is displayed on the screen aPOR mobile aPOR mobile jf fe Remote Site 1 Pad e Screen Supports single screen layout only Tapping a camera screen hides or displays OSD On Screen Display information e gt Play Pause Plays or pauses recorded video on the screen X A Move to the First Image Last Image Moves to the first last recorded image of the date e 7 J Fast Backward Forward Plays b
79. or Control Adjust the brightness contrast saturation and hue of live video for each camera by clicking the target icons on the Color Control panel Clicking the icon cancels the image processing operation and reloads the original image Only the users authorized for color control can adjust the image at RASplus Es a E ES f Brightness Contrast Saturation Hue Undo e gt 2 ka NOTE Itis important that cameras are properly adjusted These adjustments cannot make up for improperly adjusted cameras when the images are recorded NOTE Not all DVRs support the color control at RASplus Refer to the user manual of the DVR PTZ Control Y Move buttons Zoom Out In y 9 Focus Near Far Iris Close Open id a gt gt View Preset Set Preset Auto Focus Advanced Menu Select a PTZ camera at the remote site and control pan tilt and zoom Only the users authorized for PTZ control can control PTZ at RASplus The P icon will display on each camera screen when PTZ can be controlled remotely oO amp o00 o06 5 34 iPDR mobile for iOS NOTE Control features of the Advanced menu will be enabled when a camera connected to a DVR supports PTZ features such as Speed Auto Pan Tour etc and the DVR supports remote PTZ control Depending on the specifications of the PTZ camera some features of the Advanced menu may not be active NOTE Clicking the 9 Device Menu
80. out Show Keyboard Switch Application Select Add New Site and enter the device information to register the device w e Name Enter the device name to use in the RAS Mobile program ane e Address Enter the IP address of the device If the device uses the dida DVRNS function check that the Use DVRNS option is enabled and dial enter the device name registered on the DVRNS server instead of the dsd IP address The name you enter should match the name set during the Use DVRNS DVRNS setup on the device e Rtsp Port Watch Port Enter the port number of the device Check that the RTSP function 1s enabled in the device e Use DVRNS If the device uses the DVRNS function enable the Use eza DVRNS option You can set up the information for the DVRNS server by tapping the DVRNS in the default menu e User ID Password Enter the user ID and password The user ID and password you enter should match the user ID and password used to log on to the device User ID Password If you want to edit the information for the registered device tap the Detail button and push the Menu button of the mobile device Select Edit and edit the information Device list Remote 1 Remote 1 Remote 1 Address l Address Atsp Port 4 Rtsp Port 554 Watch Port i Watch Port Use DVRNS N Use DVANS H Edit Delete Show Keyboard Switch Application Close If the device uses the DVRNS function select Setting in the default menu and set
81. r connected to your computer By placing a checkmark in the box beside Include Image Info text information about the site will be included when printing the image Screen Menu Selecting a camera on the Watch or Search screen and clicking the right mouse button display the popup menu Change Camera Title Enable Audio Aspect Ratio Draw Motion Block Trim The Black noise Edges w Set Record Camera Deinterlacing b Anti Aliasing Screen Disconnect Camera e Change Camera Title Changes the camera name displayed on the screen Leaving the Camera Title blank causes the camera name set up on the remote site to display Changing the camera title does not affect the camera name set up on the remote site e Enable Audio Enables audio communication with the remote site on the Watch screen Two way audio equipped remote sites only Plays audio while playing back recorded video that has recorded audio on the Search screen Refer to 4 1 Live Monitoring and 4 2 Playback and Search for more details e Aspect Ratio Changes the image aspect ratio displayed on each camera screen 42 iPDR mobile for iOS Fit to Screen Displays images by fitting them to the screen size Original Ratio Displays images by fitting them within the screen size while maintaining their original ratio Half Size x0 5 to Quadruple Size x4 Select the desired image size Options are enabled when the selected camera screen can display images in that size Dra
82. r should match the user ID and password used to log on to the DVR If you have entered a user ID and a password the site will be connected automatically without a dialog box requesting a password Select No Password for remote systems that do not require a password e g guest login NOTE Up to 32 characters may be used for the site names Remote Desktop Setup Enter the port number and password set in the remote DVR for the VNC remote connection Refer to 3 2 Panel Remote Sites Panel for details about the VNC remote connection Ifit is set up to use the same password for every remote site you cannot enter the password here Refer to System 2 Remote Desktop Option for details about using the same password Emergency Event Instruction Enter the message to display when emergency events are called in from the remote site The Emergency Event Instruction can be checked by clicking the right mouse button after selecting the event or the site from the list in the Emergency Event panel e Change Select the group or site you want to change and click the Change button or double click the group or the site to change Then edit the site information e Remove Select the group or site you want to remove and click the Remove button List All Displays all registered remote sites e Find Enter the group name or site name to search for and click the Find button to display the matching groups or sites in the list System 1 System 2 R
83. registered device select the device from the device list Tap Edit in the menu and edit the information g Be 20 47 aPOR mobile aPDR mobile Description mr Remote Site 1 10 0 1 14 173 lt lt D gt tch Search Edit Remote Site 1 Use DVRS Address 10 0 124 182 Watch Port 2016 Search Fort 10019 Tap the Settings button in the default menu Check the settings for the aPDR mobile program and edit the settings 1f necessary Eme DVRNS If the device uses the DVRNS function set up the information for the aPOR mabile Settings OVENS Remote Site 1 Arece DVRNS server Enter the IP address or domain name and port number of Port the DVRNS server The IP address or domain name and port number of the Character Encoding DVRNS server should match them registered on the devices e View Select the language to be used when displaying text on the monitored video such as camera titles The language should match the language of the text Open Source Licenses so that textual information 1s displayed properly If the language of the text is not supported by Character Encoding of the aPDR mobile program select Western About aPOR moblle Copyright End User License Agreement Mew site Delete site 63 User s Manual Monitoring 1 Select a device from the device list and a menu is displayed Tap Watch Video from the device is displayed on the screen aPOR mobile lt
84. rs DVRs network video transmitters and network cameras included 1 2 RASplus Features RASplus program is an integrated software program that controls system management video monitoring video recording and image playback of multiple remote sites RASplus offers the following features e Checks and reports status of remote DVRs e Notification of events detected at remote sites e Remote monitoring of live camera images e Panic recording of monitored images e Time lapse and event search of recorded images e Remote software upgrades and system programming e View system and event log information of remote DVRs e Remote monitoring of multiple remote sites using maps e Connect up to 64 remote sites up to 16 remote sites for remote search at a time NOTE This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit http www openssl org NOTE The software included in this product contains some Open Sources You may obtain the complete corresponding source code from us See the Open Source Guide on the software CD OpenSourceGuide OpenSourceGuide pdf or as a printed document included along with the User s Manual 1 3 Product Information Package Components e User s Manual this document e Installation CD System Requirements e Operating System Microsoft Windows XP x86 32 Bit Service Pack 3 Microsoft Windows Vista x86 32 Bit Service Pack 1 Microsoft Windows 7 or
85. rsonal computer to review video saved as Self Player files The file contains a Player program Double clicking the target file starts the Player program NOTE The Player GUI will differ depending on the model of the remote DVR that is connected to RASplus when reviewing the video saved as a Self Player file MiniBank Player NOTE It is suggested that the computer used for the MiniBank Player program has at least an 800MHz Pentium Ill If your CPU is slower than this video clips recorded at maximum speed with very high image quality will be played back slowly Quit Bitton EI on 2005 05 26 Backup kile 13 56 56 Information 2005 05 26 13 57 30 et 007 01 12 08 06 59 PM Currentiimage Image Search Slide Bargay Play backiFunction Buttons gg Brightness Control Slide Bary a gt The Monitoring Screen displays the backed up images Click the right mouse button on the image to zoom in and click the right mouse button while holding the Ctrl key to zoom out Scrolling the mouse wheel up or down on the image also zooms in or out Clicking the right mouse button on the image while holding the Shift key switches the screen size Click and hold the left mouse button and drag the image to move its position Clicking the Quit button exits the Player program Click the Save button to save the current image in a bitmap file format on the local hard disk drive or floppy disk Click the Print button to print the current image on the pr
86. rtup language from the list of available languages and then click OK Language Option Select the language option EEES v Language WE english CIB Qrrancais French O MA Deutsch German OM italiano Italian O Espa ol Spanish NOTE To properly display the selected language your PC s operating system should be set to support the selected language 9 When the following dialog box appears after finishing the RASplus installation select Install MSXML application and click Finish Installing the MSXML is required for RASplus to initiate Setup RASplus Installing RASplus Click Finish to exit Setup Install MSXML Finish 10 Click Next ie MSXML 4 0 SP2 Parser and SDK Setup Welcome to the MSXML 4 0 SP2 Parser and SDK Setup Wizard The Setup Wizard will install MSXML 4 0 SP2 Parser and SDK on your computer Click Next to continue or Cancel to exit the Setup Wizard E Cancel User s Manual 11 Select accept the terms in the License Agreement and click Next iz MSXML 4 0 SP2 Parser and SDK License Agreement End User License Agreement Please read the following license agreement carefully END USER LICENSE AGREEMENT FOR MICROSOFT SOFTWARE MICROSOFT XML CORE SERVICES MSXML 4 0 IMPORTANT READ CAREFULLY This Microsoft End User License Agreement EULA is a legal agreement between you either an individual or a single entity and Microsoft Corporation for the Microsoft softw
87. s recorded audio Audio playback can be On or Off by selecting Enable Audio from the menu displayed by clicking the right mouse button on the screen NOTE Audio might be interrupted during playback because of network conditions and your PC s performance NOTE Playing recorded audio may not be supported depending on the specifications of the remote DVR gt Save Clicking the EH button on the Search View panel saves recorded video Save Type Save As Self Player Save As Video e Save As Self Player Saves any video clip of recorded data as an executable file Set up the save parameters in the following dialog box Click the Start button and select Save in Enter a File name and then select Save as type exe for the video you are saving Then click the Save button NOTE When more than one video segment exists in the same time range due to time overlap a segment selection dialog box will appear and ask you to select the video segment you want to save from the segment list Refer to the user manual of the remote Save As Self Player 11 18 2008 10 43 18 Last 11 18 2008 10 43 18 b lt C Save Password Don t ask about file limit C Include Text In Data DVR for details on time overlap A 1 aa o Ea a ie ed St NOTE When the data file reaches 2GB you will be asked to continue saving by creating multiple Progress files in 2GB units If you do not want to be asked select Don t ask about f
88. ses saving to stop once the data file reaches the maximum file size setting Selecting Save Split File saves video by creating multiple files in 2GB units or in the Max File Size units all rs el Ge de E teh TED a ant alg ahs Ge hen ae cameras OOOOOOOOOOOOOOO0 Codec Setup Codec Cinepak Codec by Radius i Size 640 x 480 YGA v Anti Aliasing Screen NOTE Selecting View Proceeding Frames displays a popup screen showing the video currently being saved Keyframe J Frames Quality E J Limit File Size Progress View Proceeding Frames gt Motion Search Click the 4 button on the Search View panel to search for motion in the recorded images on remote DVRs Motion Search Search Condition Search Screen Record Period From Ed 3 4 2010 Y 3 36 05 PM al 3 36 05 PM Find Method 3 Motion Search Museum Search Sensitivity 3 Num of diff block A C ME A N Tr Date Time NOTE Motion Search is supported only in the single screen mode e Record Period Sets up the record period of images to search e Find Method Selects a search method Motion Search Searches for images with changes in the Detection Area between two consecutive images for example when there was movement Museum Search Searches for images with changes which last for the Activation Time in the Detection Area when compared to the imag
89. t only Tapping a channel displays video from the camera fs PTZ Mode Enters the PTZ mode and allows you to control a PTZ camera in single screen layout only This is not available if a PTZ camera is not configured in the device A PTZ icon is displayed on the camera screen when the PTZ mode is available 74 iPDR mobile for iOS e Audio Enables or disables two way audio with the device in single screen layout only It is not available to change the screen layout or camera channel while two way audio is enabled e 8 Received Data Displays the data volume NOTES e In landscape of iPod Touch or iPhone not all buttons above may be displayed In this case tapping and holding the screen displays a menu of the buttons e Some functions may not be supported and the corresponding buttons may not be displayed depending on the specifications and version of the device e Drag the menu bar to display hidden buttons when there is not enough space on the menu bar to display all the buttons PTZ Control Tapping the 4 PTZ Mode button enters the PTZ mode and allows you to control the PTZ camera e H Exit Exits the PTZ mode Move Allows you to move the PTZ camera direction Preset View Displays a list of Presets which you have set in the device Tapping a Preset moves the PTZ camera to the location 9 Zoom Out In Zooms out or in video 9 O Focus Near Far Focuses near or
90. tch Event View Emergency Event View ta Report View To Search View The Watch Event View panel displays events detected at individual remote sites while RASplus is in the live monitoring mode The description of event icons 1s as follows 13 User s Manual A Alarm In On Object Detection Text In E Disk S M A R T H Disk Almost Full Panic Recording On Fan Error Off System Restart A Audio Detection A Alarm In Off BS Video Loss Fs Alarm In Bad l Disk Bad ld Disk Config Change 4 Panic Recording Off System Boot Up fe System Shut Down 3 Trip Zone Motion Detection s Video Blind Recorder Bad l Disk Full tq Disk Temperature El Fan Error On System Alive ga Video Analytics Detection Tampering NOTE Some event icons may not be supported depending on the specifications and version of the remote DVR Emergency Event View Panel Emergency Event View Site remotesite1 remotesite1 O Dremotesite1 remotesite1 O Dremotesite1 remotesite O remotesite1 O remotesite1 O remotesite1 Fi m RarmmntaSita 1 x Watch Event View Emergency Event View ca Report View 4 Search View SIGO Event 14 Date Time 06 17 2008 18 46 04 06 17 2008 18 46 01 06 17 2008 18 31 04 06 17 2008 18 16 03 06 17 2008 18 01 03 06 17 2008 17 47 03 06 17 2008 17 46 01 06 17 2008 17 45 31 06 17 2008 17 38 29 MA 17 2NMA 17 gt 7 gt 0 The Emergency Event View panel displays a list of events
91. to Sequencing group 28 iPDR mobile for iOS Record Menu System View Remote Favorite Sequence Record Image Layout Help 8 Panic Recording On e Panic Recording Off Record Play NOTE The Record menu can also be accessed using the toolbar controls Starts or ends panic recording Selecting Record Play initiates the RecordPlayer program and plays recorded video Refer to 4 4 Panic Recording for more details Image Menu iew Remote Favorite Sequence Record Image Layout Help Save En Print NOTE The Image menu can also be accessed using the toolbar controls e Save Saves the current image as a bitmap bmp or JPEG jpg file e Print Prints the current image NOTE Refer to 4 3 Additional Functions for more details Layout Menu iew Remote Favorite Sequence Record Image Layout Help Screen Layout Frame Layout d NOTE The Layout menu can also be accessed using the toolbar controls gt Screen Layout Screen Layout Layout Change PIO Layout 1x1 Frame Layout Previous Cameras ES Layout 2x2 in EL RA Next Cameras Layout 8 ES Full Screen Layout 3x3 Layout 4x4 Layout 5x5 Layout 32 Layout 6x6 Layout 7x7 AAAS amp Be we Layout 8x8 29 User s Manual Select the desired screen layout using the layout toolbar When changing the screen layout the selected camera on the current screen will be located in the first cell of the new layout When
92. to remove from the Upgrade Sites list and click the Remove button e Remove All Removes all sites in the Upgrade Sites list e Upgrade Now Upgrades the software on the Upgrade Sites 1x NOTE When upgrading a PC based DVR select PC Based DVR and then select the desired upgrade folder Enter File Name Enter file name C PC Based DVR O 24 iPDR mobile for iOS BatchJob Setup Upgrade Setup Group List Setup Sites a Remotesites E RemoteSite1 E RemoteSite2 E RemotesSite3 Setup Imports saved settings from a remote DVR to the remote DVR First select a remote site to set up from the Group List and add it to the Setup Sites list by clicking the Add button Then click the Setup Now button e Add Select the site to add from the Group List and click the Add button e Add All Adds all sites in the Group List to the Setup Sites list e Remove Select the site to remove from the Setup Sites list and click the Remove button e Remove All Removes the site from the Setup Sites list e Setup Now Clicking the button and selecting a setup file applies the settings to the remote DVR in the Setup Sites list NOTE When importing saved settings to more than one remote DVR network settings will not be imported this feature may not be supported depending on the specifications and version of the remote DVR NOTE This feature is NOT supported for PC based DVRs gt Disconnect Disconnects all current con
93. vents If you want to search for events for other dates change the date by using Calendar Search and repeat Event Search TA 0 pouan e Search If you enter text that you want to search for search results matching Mation the text are displayed from the event list Detection ie e Event List Tapping an event from the list displays the event detected image on Motion o the screen Tapping the Next button at the bottom displays the next 100 events Detection Motion Detection Motion Detection Search by Calendar Tapping the ml Calendar Search button in the search and playback mode allows you to search for recorded video of a specific time Tapping a date on the calendar displays the recorded data from the selected date by time in one hour segments at the bottom Tapping a specific hour at the bottom allows you to select a precise time down to the minute and second Tapping the Move button displays recorded video of the selected time 66 iPDR mobile for iOS RAS Mobile for BlackBerry RAS Mobile for BlackBerry allows you to access devices DVRs network video transmitters and network cameras and monitor live video remotely via network connections using BlackBerry OS based mobile devices anytime from virtually anywhere System Requirements e Operating System BlackBerry v4 6 or higher e Processor ARMv5te or ARMv7 compatible processor e Display 300x240 pixel or higher e Storage 300KB or more o
94. w Motion Block Displays the area that detects motions with red blocks on the screen Network Video Transmitter connection only Trim The Black noise Edges Trims the black line noise displayed at the edge of the image Network Video Transmitter and some models of Network Camera connection only MultiStream Allows you to choose the desired stream if the remote DVR is in the multistream mode for live monitoring Set Record Camera Sets the selected camera channel to be recorded during panic recording Refer to 3 3 Menu System Menu for details on configuring camera channels for panic recording Deinterlacing Enhances image display quality of interlaced video on the screen by eliminating horizontal scan lines or noise in areas with motion Anti Aliasing Screen Enhances image display quality for all cameras on the screen by eliminating stair stepping aliasing effects in the enlarged image Disconnect Camera Disconnects a camera on the screen NOTE When using a low end computer image drawing speed might decrease while using a deinterlace filter depending on the type of deinterlace filter NOTE When using a low end computer image drawing speed might decrease when the Anti Aliasing Screen option is selected 4 4 Panic Recording Clicking the button on the toolbar starts panic recording of cameras currently displayed on the Watch screen Clicking the button again stops panic recording Up to 16 channels can be recorded at a t
95. ws efficient monitoring of the remote sites by displaying a map of the selectable site Click the right mouse button on the map panel to select the map image file rmp you want to monitor from the list The selected map image displays in the Map panel and the sites registered on the map image file will be connected When the selected map 1s linked with sub maps clicking the linked image moves to the sub map E Remote Sites Ef Favorite Sites E Map NOTE Refer to Appendix C Map Editor for details on editing maps The Map panel pops up another screen when alarm in motion or video loss events are detected or when you click the device icon according to the Map Editor settings Change the popup screen location by clicking the left mouse button on the screen and dragging it to where you want it located Clicking the right mouse button on the popup screen displays the following popup menu E Remote Sites EN Favorite Sites B Map x 0 25 e x0 25 to x2 Sets the desired size of the Map popup screen a e Draw Motion Block Displays the area that detects motions on the screen Network Video Y x 1 initial size Transmitter connection only x 1 25 e Full Screen Enters the full screen mode of the Map popup screen al e Transparency Adjusts the transparency of the popup screen PTZ Set Controls pan tilt and zoom of the selected PTZ camera Draw Motion Block e Disable Time Out Continues displaying the popup screen when ev
96. y option of Watch and Search Screen during System setup the remote site can also be set to connect using the right or left mouse buttons This is user defined and must be set during System setup Select Watch Screen to connect to the selected site on the Watch screen when the text menu screen appears Search Screen Screen Layout and Frame Layout C E GB Es Es Es ba bs laa ed k Me E g RASplus provides multiple screen layout options The formats available are single screen quad 1 7 3x3 4x4 5x5 1 32 6x6 7x7 8x8 and full screen When in one of the multi view formats clicking the HE or button will move to the previous or next page To view a specific image in the single screen mode move the cursor to that image and double click the left mouse button To return to the previous screen mode from the single screen mode double click the left mouse button in the monitoring window Clicking Layout Load will apply the selected frame layout to RASplus and clicking Layout Setup allows you to set up the user defined frame layout Audio Communication RASplus supports audio communication between the RASplus system and the remote site equipped with two way audio If you want to enable audio communication with the remote site select any camera of the remote site on the screen and click the right mouse button Selecting Enable Audio from the menu displays the following audio control panel NOTE The icon will display on eac
97. yout at RASplus Startup Select whether or OA not the selected frame layout loads automatically when RASplus Laval starts i e Save Enter a layout name and click the Save button to save the Os current frame layout as a new user defined layout e Rename Select the layout to change from the Layout List and a i click the Rename button Then change the layout name _ Layout 1 e Delete Select the layout to delete from the Layout List and click Layout 3 Layout 4 the Delete button NOTE Up to 10 user defined layouts can be saved iPDR mobile for iOS Help Menu Displays RASplus version information 3 4 Toolbar The Toolbar allows convenient access to desired functions 2 RASplus Remote Administration System Plus RemoteSite 1 System View Remote Favorite Sequence Record Image Layout Help Els lar Sy a e BIEL E LE Es ES bs ba be las ea ki Mel E Remote Sites nx an E OH ED ER a AM A RM The controls on the toolbar perform functions as described below Anbriarasa a Disconnect Ti RASplus Setup lk Load Setup File liq Save Setup File Sl Batch Job Setup Log 17 Save Favorite Sites 3 Auto Sequence a Save a Print e Panic Recording Ba Play O B GS 68 Es Bs ba bs lo ld Es el E single Guad 7 5x3 4x4 5x5 32 Bxb Fx 6x5 Full Previous Next Select the desired screen layout using the layout toolbar When changing the screen layout the selected camera on the current screen will be located i

Remote Administration System Plus (RASplus)

Contents

Download Pdf Manuals

Related Search

Related Contents