PicoAir HD laser pico projector User Manual
Contents
1. Please use included power adapter or any adapter supports 5V 2A to charge PicoAir Please note that using other adapters than the one provided may result in longer charging times 10 Troubleshooting Mobile device cannot find Celluon PicoAir during Miracast connection search Please make sure PicoAir is on Miracast mode This may also be due to particularly heavy wireless traffic If this is the case please reset the device by pressing the reset button on the back of device Cannot stream contents through DLNA application Please make sure device s WiFi is properly connected to PicoAir s WiFi For DLNA connection please make sure to connect using the password 12345670 It takes a long time to display contents through DLNA mode It depends on each DLNA streaming app to project contents through PicoAir For large media files it may take some time to load and convert the video to the correct format PicoAir is connected but only the black screen is projected from the device Please check if the connected mobile device is on sleep mode Ifthe screen of the connected device goes black the projected screen will go black as well Note that if the volume control LED patterns are on the PicoAir is powered on There is no sound Please make sure the volume level of the PicoAir and or connected device is not in the mute status The video stops playing periodically Please make sure connected device has enough b2. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body This transmitter must not be co located or operating in conjunction with any other antenna or transmitter Industry Canada Statement This device complies with Industry Canada license exempt RSS standard s Operation is subject to the following two conditions 1 This device may not cause interference 2 This device must accept any interference including interference that may cause undesired operation of the device CE Caution Risk of explosion if battery is replaced by an incorrect type Dispose of used batteries according to the instructions IEC 60825 1 Caution Use of control or adjustments or performances of procedures other than those specified here in may result in hazardous radiation exposure 2 Certifications K FC CE KC MSIP CRM CLK PICOAIR FCC ID TCLPICOAIR CE1177 A I Industry Industrie Canada Canada compliant RoHS IC No 10211A PICOAIR IEC 60825 1 Class 3R Laser 3 Environmentally Friendly Disposal and Recycling To protect the environment dispose this product separately from household waste once it has reached its end of life or take it to your local electronic waste disposal center Built in Battery Battery Type Rechargeable Lithium ion Polymer Battery Battery Operating Time Approx 120 minutes with continuous use Battery Capacity 314
3. and to permit persons to whom the Software is furnished to do so subject to the following conditions The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software THE SOFTWARE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM DAMAGES OR OTHER LIABILITY WHETHER IN AN ACTION OF CONTRACT TORT OR OTHERWISE ARISING FROM OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE 17 18 12 Warranty Celluon warrants this product to be free from defects in materials and workmanship under normal use for a period of one 1 year from the date of purchase as evidenced by the receipt of purchase During the warranty period Celluon shall repair or replace the product if defective If replaced the replacement shall be with a product of equal or greater value This warranty is limited to the purchaser and is not transferable Please contact support celluor Gelluon Version 1 0
4. 0 mAh 3 7V Use supplied USB power adapter to begin charging the battery Charging the Battery Battery status is indicated by four blue LED indicators while charging 4 LED 100 3 LED 75 2 LED 50 1 LED 25 Battery Charging Time Approx 270 minutes 4 Package Contents IT Power PicoAir User Manual Adapter Holding Mount Pouch 5 Product Features PicoAir is a laser based HD pico projector that always stay focused and easily fits in your pocket It enables you to share contents from your mobile device onto any surface via Miracast or DLNA connection 6 Identifying Parts Cam Backlit Battery Indicator Light Speaker Reset Button FE Ck Za 3 5mm Audio Out Miracast or DLNA Switch CHARGE Micro USB port for charging Power Button Select Button Battery Status Indicator 7 Connecting PicoAir a Compatible Operating Systems For Wireless Connection Miracast DLNA Android OS 4 2 or later Any digital device that supports DLNA protocol Windows OS 8 1 or higher Using DLNA connection requires downloading DLNA Any OS that supports Screen Mirroring functionality streaming app from the App Store or Play Store b How to Connect M D Using Miracast CD The Miracast capability is called different names on difference devices i e Samsung Sony Screen Mirroring HTC Media Output Please find this in device settings 1 Turn on PicoAir by pressing power but
5. 3 4 mm Size 6 x 3 x 0 45 inches 1709 Weight 0 38 Ibs Electrical Characteristics Battery Capacity 3140mAh 3 7V Operating Time Apprx 2 hrs The operating time may vary depending on the environment of use Speaker 1 0W Audio Interface 3 5mm ear phone jack Wireless Dual 2 4 5G Laser Safety Classification IEC 60825 1 Class 3R Consumer safe device Laser Spec Output Red 90mW Blue 85mW Green 50mW Wavelength Red 639nm Blue 445nm Green 522nm Divergence Angle 42 1 deg Pulse Frequency 60Hz Item Spec Remark Environmental Condition Operating Temperature 0 C 35 C cd Miracast Yes For devices with Android OS Mode switch Compatibility DLNA Yes For devices with iOS Mode switch Application Required Please use the included power adapter or any adapter supports Power Adapter MicroUSB Type 5V Max 2A 5V 2A to charge PicoAir Using other adapters than the one provided may result in longer charging times The MIT License MIT Copyright c lt 2015 gt lt Celluon Inc gt Permission is hereby granted free of charge to any person obtaining a copy of this software and associated documentation files the Software to deal in the Software without restriction including without limitation the rights to use copy modify merge publish distribute sublicense and or sell copies of the Software
6. DICOOIr Table of Contents 1 Safety Precautions Certifications Package Contents Product Features Identifying Parts Connecting PicoAir naupwn 8 Making Adjustments 9 Charging the PicoAir 10 Troubleshooting 11 Specifications 12 Warranty FCC Compliance Information FCC Class Notice FCC Caution FCC RF Radiation Exposure Statement Industry Canada Statement CE Caution 1EC 60825 1 Caution Environmentally Friendly Disposal and Recycling a Compatible Operating Systems b How to Connect c Switching Connection Mode a Volume Adjustment b Speaker Earphone Usage c Laser Alignment 1 Safety Precautions This product is not waterproof avoid using it near water or wet places There is a risk of malfunction if product is used in places where sudden or extreme temperature changes occur Applying excessive force or impact to this product may result in product damage and will void warranty Never attempt to disassemble or service this product yourself Doing so can result in electrical shock and void warranty This is a Class 3R Laser product For your safety do not stare directly into the laser source Doing so could damage your eyes FCC Compliance Information This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference to another device 2 This device must accept any interference received includi
7. attery to play the video If both devices have enough battery this may be due to unstable WiFi connection Please disconnect and reconnect the device Device automatically shuts down during use This may be due to the depletion of battery or high temperature of the product Ifthe product is left in a place where the enviornmental temperature is high such as in a blanket or near heater the power will turn off automatically in protection of fire hazard Please cool the product to specified operating temperatures before using again If the prdouct has shut down due to battery depletion please charge the device before turning it back on PicoAir s screen is frozen it stopped playing the video no response from buttons when pressed cannot convert modes Please reset the device by pressing the reset button on the back of device Refer to Identifying Parts section for the location of reset button Product makes abnormal noises Please contact Celluon Customer Service for further assistance The projected image is unclear This is due to the shifts in laser diode Please refer to Laser Alignment instruction page to adjust shifted lasers Connection through Miracast intermittently disconnects during use This is due to the noise occurred by double wireless connection Try to connect again after disconnecting all the previously connected wireless networks Can users update PicoAir s firmware Please visit Celluon we
8. bsite www celluon com for instructions to update PicoAir s firmware The occasional discrepancy between audio and visual display When users stream media content from an online source while using PicoAir audio discrepancy with video output may occur depending on wireless environment The cause may be from the wireless connection between your mobile device and WiFi network or between your mobile device and PicoAir A slight delay in mirroring Miracast from your mobile device to PicoAir may also occur PicoAir turns off while charging Please make sure PicoAir is being charged with the dedicated adapter Other adapters may not meet the optimal power supply required for PicoAir Therefore using other adapters than the one provided may lead to the PicoAir turning off until sufficient battery power is stored 15 16 11 Specifications Display Performance Item Display Method Spec Laser Remark Product Lifetime 10 000 hours The perceived brightness of laser projectors with a given ANSI Brightness 32 ANSILumens brightness is 50 higher than that of the LED based projectors Aspect Ratio 16 9 Throw Ratio 13 Sequential Contrast Ratio 80 000 1 Resolution 1920 x 720p HD resolution Color Depth 16 7M color RGB 24bit Focus Focus Free always in focus No focus wheel required Max Image Screen Size 250 inches In optimal lighting conditions Measurement 150 x 73 x 1
9. ng interference that may cause undesired operation FCC Class Notice This equipment has been tested and found to comply within the limits for a Class B digital device pursuant to Part15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment This equipment generates uses and radiates radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur with special installation If this equipment does cause interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to correct the interference by one of the following measures Reorient or relocate the receiving antenna Increase separation between the equipment and receiver Connect the equipment to an outlet on a circuit different from which the receiver is connected Consult the dealer or an experienced radio TV technician FCC Caution Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment
10. ns amp to select Firmware Update Follow instructions on screen to update the engine firmware Product Firmware Update Please visit Celluon website www celluon com for the latest system firmware update 13 14 9 Charging the PicoAir Charging Time Operating Time 4 5 hours 2 hours with continuous use Battery Status LED Indicator Status Description 0 charged Volume control amp sensors will blink to indicate low battery status First LED indicator remains solid When charging at this stage the next LED Y i 25 charged indicator will blink to indicate it is being charged bong 50 charged First two LED indicators remain solid When charging at this stage the next LED indicator will blink to indicate it is being charged tti 75 charged First three LED indicators remain solid When charging at this stage the next LED indicator will blink to indicate it is being charged 100 charged All four LED indicators will remain solid 1 Locate micro USB port next to the battery status button 2 Use the supplied power adapter to charge the PicoAir through the micro USB port Please fully charge PicoAir s internal battery before first use approximately 2 to 4 hours A low battery warning icon will show on the screen when the battery is low Use the included power adapter to charge your PicoAir If the battery is too low PicoAir will automatically turn off
11. r Cancel MT Scan Wi Fi Direct xx For DLNA connection with iOS devices 1 Follow above steps 1 9 lt Settings Wi Fi Enter the password tor Caluon 0471 Piookr Canoe Enter Password Join WiFi MO Password 12345670 CHOOSE A NETWORK Celluon 0471 PicoAira 1 1234567890 C Switching Connection Mode 5 On a desired mobile device go to WiFi setting and connect to Celluon PicoAir Use password 12345670 to connect 6 When WiFi is successfully connected open the installed DLNA streaming application on the mobile device 7 Select desired content to display 8 Select display location Celluon PicoAir 9 Mobile device will say Connected and PicoAir will start projecting selected media contents Use the sliding mode switch located next to the micro USB charge port to change connection mode 8 Making Adjustments Volume Adjustment Volume is controlled directly from PicoAir Locate touch volume control area on top of device Adjust the volume by lightly touching the or pattern Speaker Earphone Usage Please connect a speaker or an earphone to the 3 5mm audio out jack Laser Alignment When the images seem blurry and or the colors appear skewed please visit Celluon website at www celluon com for Laser Alignment instructions Engine Firmware Update Press and hold battery status indicator for about 3 seconds MENU screen will be displayed for menu selection Use volume control patter
12. ton for 2 3 seconds Preparing Wireless Connection 2 Celluon logo will display upon powering on followed by a Preparing 3 After 20 30 seconds Ready to Connect screen will display Wireless Connection screen Screen Mirroring 4 On a desired mobile device find and select Screen Mirroring Media Output 5 Mobile device will search for nearby devices to connect Screen Mirroring Screen Mirroring Available dev Scanning Celluon 0471 PicoAir onnectir 6 When device discovers Celluon PicoAir 7 Mobile device will say Connected and tap to connect PicoAir will start mirroring display It is recommended to disconnect any previously connected WiFi network before attempting to connect via Miracast screen mirroring 10 M D Using DLNA amp To connect to a device using DLNA capability you must install a DLNA streaming app on your mobile devie Apps can be downloaded from App Store Play Store Preparing Wireless Connection 2 Celluon logo will display upon powering on followed by a Preparing wireless connection screen 3 Locate the mode switch next to the micro USB charge port on the side of device Slide the switch to D to change to DLNA mode 1 Turn on PicoAir by pressing power button and holding for 2 3 seconds 4 DLNA Ready to Connect screen will display upon completion of mode switch 11 12 Celluon 0471 PicoAir ij advanced optio
Download Pdf Manuals
Related Search