Wireless Video Door Phone - STV-Series
Contents
1. F Tml 07 36 o Tull 07 41 p 3 Image of Brightness Adjustment Adjusting the brightness of the screen freely by the up down key on the menu while it s working Adjusting range 0 9 4 Image of volume adjustment Adjusting the volume by the left right key on the menu while it s working Adjusting range 0 9 5 Taking photographs Pressing picture key to show P to take picture from outdoor which will be stored inside and can be viewed later Tull 4 07 42 E 6 Monitoring On standby mode press the monitor key to show little eye picture which can last for 24 hours monitor mode Operating Instructions I Attention The pre operation ee ee A Please connect the E lock with power as the manual instructed Switch on the camera and then turn on the monitor Press the Monitor as to mobilize the outdoor camera Make use of key up and down to adjust the brightness to the optimal picture Comprehensive Operation of Monitor amp Camera 10 Press the call button of the camera the monitor will sounds ding dong and display the image of visitor Press the Talk button to answer the visitor and press the Unlock button to release the door if needed Press twice of the monitor button for closing the current video talking Then the monitor will shift to stand by state If there is no operation on the Monitor the display screen will autom2. consumption Unlock 12W consumption Work 2W 3 Screen Display 1 Image of starting Keep pressing the power button for Wireless video intercom doorbell several seconds and the screen display this image for 2 seconds and then shift to the standby state which Transmitting Transmitting 17dBm 17dBm power power Channel Channel 64 64 number number 125x93x33mm Size mm 146x60x 15mm indicate well functioning Tull OF KEI fo 2 The picture of time adjustment On the state of standby Press unlock key enter the screen of time then adjust the time by the up or down button freely Indoor Wall Outdoor After pressing the Unlock key of the monitor it transfers the information of unlocking to the camera by way of wireless signal and the E lock will be open electronic lock connected with the camera through cables 6 Part of power adapter The outdoor unit power supply 12V 1A DC transformer The indoor unit power supply 5V 1A DC transformer Please use the appointed or same specification same rate voltage and current power adapter the non specified power adapter may damage the circuits and components inside 7 Part of the battery The monitor is built inside the high capacity rechargeable Lithium battery which requires well ventilated and cool without direct sunlight placing environment The battery is fast consumed product with limited life Repeatedly charging 12 Tull OF 36
3. Indoor power switch Do not di mble the machine without authorization If in need of failure O Not Cias mt ani a 6 Unlock to control the camera and release the E lock ir pl n he distri r or the company s technical department es a E Dee Cone a eure pany P 7 Monitor Monitoring viewing photos to start monitoring the outdoor circumstance view the photos taken by the camera 14 7 8 Brightness to enforce the brightness of images photo up time 9 Volume turn down the volume time adjustment 10 Brightness turn down the brightness of images photo down time 11 Volume turn on the volume time adjustment 12 Talk talk to the outdoor unit 13 Picture press the picture key to take picture or discharging in working state will shorten its life New product should be charged for 2 3 hours each time There is no built in battery for the outdoor device For convenient use we suggest connecting the power adapter we provide 8 Specifications and parameters 14 Charger base indicator light The standby period for common battery of WB C is 6 10 days while it is p Input AC 100 240V Input AC 100 240V 60days for high capacity battery of WB D i gi Power Supply 50 60Hz Power Supply 50 60Hz Output DC 12V 1A Output DC 5V 1A Screen Camera CMOS 300 000 pixels 2 4 TFT 320x240 specifications 3 7V 1200 3600mAh Light Source 6 LED lights Battery Li Ion Battery Power Standby 0 2W Power Standby 0 1W
4. Wireless Video Door Phone User Manual 12 No one is authorized to amend the warranty including the personnel or the Contents authorized technician 13 Our company reserves the final right of interpretation of the product For INPOCUCHOI so sstssduassnesusenneneak nang E SATO 3 any problems related to the product please contact our technical support PO AtUINCS ws dist ce ind orien a ioe tas crane T aden eaten age 4 team or your dealer Outdoor Camie Ase 4i65 ch a E E E NREN 5 MIC OOK MONOT usten aa A A ETE 7 14 Please read the user manual carefully before installation and operation Sereen DI pla eiae e aa CEEE E Oa E EEEN 8 Operation INSU CONS 0 54 4623 is aiid 4 ands od oh eo as Aas eee tenia aeas 10 Tstallavion instruciono aer ens tere tiateeeniereereswts 11 Part OF PO WEF Ad ADEE aun 295 tachess a2 aataaeearne aa O 12 Part Orne Date 2c9 0a tase on crauees oa praieaeaes Sea eenee sarang oa 12 Speciicatlons and parameters 2 lt 3 4 cnhiew en iidiieruieedadeen ideas 13 WOK ME Envir nme nt stir 2405200 tues eaaa a a esac easeoulae 14 Maintenance OF GEVICES 2 5i5 0i0052h ts aaded simewaieeetsuaaamaddleaenanbesnense 14 Matters Needs 0 DE NOUCEG s5 o2c2 52a cane sentria tm ncrind O 14 Parlute diagnosi S eeen jetta eins e a EAT 15 INEI e E A E eal di E EAE E E E 16 Technical support and ServiCe 0 cece cece cece eee e s 16 Wara E and 2cccrsctcinsasagiee nies E oe cenren cara staases 17 Remark All the pictures and scr
5. atically turn off and shift to stand by mode after 60 seconds 5 The images are automatically kept by the monitor if there is nobody inside answering the outdoor calling 6 The monitor will shut down the image taking within 30 seconds II The operation of the monitoring feature 1 24 hour monitoring solution Press button Monitor the working mode shift to 24 hour Monitoring even though there is no outside visitor 2 Now press button Talk to exit the state of monitoring Re press button talk enter talking press button Unlock for unlocking function 3 Re press button Monitor to enter the Monitoring mode Photographing Instruction 1 At stand by mode press button picture to shift the working mode then the photographing mode is available Press button picture to take pictures one press for one picture 3 Press button left and right to go through the stored photos If in need of deleting the photos press button Monitor to enter the delete menu with Y for sure and N for negative press left to choose Y then press Talk to delete the photo 5 Press button picture to exit reviewing Keep pressing button talk for several seconds to exit photographing mode 5 Installation instructions The operating principle for the camera and monitor 11
6. camera The socket of water proof cover The socket of voltage signal control lock The power socket The socket of switch signal control lock Battery Installation D Fixture 2 Wire hole 12 Failure diagnosis Unable to start the product Unable to charge No voice in speaking mode Flashing or noisy for the images No signal image in the indoor device Whether the battery is low Whether the machine connect to power adapter Whether the plug of power adapter correctly plug into the charging slot Whether the power adapter has been connected to the 110 240V AC Whether the volume has been adjusted to the lowest Whether the indoor device is placed beside the TV set fluorescent lamps mobile phone which has electromagnetic wave Whether the outdoor phone has connected to the power Whether the outdoor phone is too far away from the indoor phone Whether there is other strong magnetic space that bothers Charge the li ion batteries Connect the power adapter Re connect the devices and power adapter Re insert the plug so that power supply connected to AC power adapter Adjust the volume to the moderate Keep the devices away from these electronic products which has electromagnetic wave To connect the outdoor device power Keep the distance within 60 meters in multi wall barrier case Put the indoor device away from the strong magnetic space Whe
7. dio and video wireless transmission principle with outdoor unit taking pictures indoor screen displaying and bilateral intercom User can unlock the door with the indoor device remotely and monitor the outdoor situation at any time While the advanced infrared assisted lighting features enable the user to identify the night visitors Fashionable and creative appearance clear viewing and easiness to install are providing a more scientific protection for your family which is absolutely an ideal security product for modern families For optimal utilization of the products please carefully read our instructions for correct installation and operation Remark This manual is applicable for the assembly with one to one monitoring instead of one to multiple monitoring Features WIRELESS 150M gt TFT SCREEN USB CONNECT 2 4GHz launch frequency barrier free remote control distance is between 180 400m With micro processing technology auto remote control excellent performance and high reliability The TFT 2 4 digital color LCD screen CMOS 300 000 pixel for camera Clear night viewing 24 hours monitoring calling speaking and remote unlocking controlling etc One camera can support 6 pieces of monitors For further information please contact the salesman The mini USB data output for built in monitor with inner high capacity rechargeable Lithium battery The monitor can take save view more than 100 photos a
8. een display shown in this manual are only for presenting the operation of the products If there appears differences due to advanced version for actual products or production batch lot please take actual devices for reference 19 6 7 8 9 Any loss of product due to sabotage improper handling or treatment carelessness accident fire flood earthquake or any natural calamity shall not be covered under this warranty It shall be the absolute discretion of the company for the following circumstances A Any repairs or replacement of parts at site of installation or other service B Any arrangement for the technician or dealer to do the repairing The product is operated under 220 10 AC voltage Any failure caused by operation of the machine out of these limits will not be covered by the above warranty The purchaser should preserve the original invoice for necessary verification and present it as and when required 10 The warranty excludes the following circumstances eThe product is not purchased from an authorized dealer of the company eAny damages caused by accident mishandling wrong installation or misunderstanding for the instructions issued by the company eAny damages caused by improper or defective power supply 11 Any damages caused by modification repairs or maintenance by unauthorized personnel under every circumstance 18 Introduction This product adopts 2 4GHz digital au
9. the accessory Technical support and service We provide before during and after sale service during the whole selling process We suggest customers read the installation and operation instructions before use Please follow the operation instruction when installing and testing the products if there is any queries please contact our technical support and customer service center Remark 1 We devote ourselves to reform and innovate the products Please do understand there is no individual notice when modification occurs The pictures shown here are for reference only If there is any difference please take the actual product for standard 2 The interpretation right for the products is reserved in our company If there are any quality issue please feel free to return to us Without permission not a company or single person is allowed to tear up the label for the product Otherwise he she should bear the responsibility 1 Outdoor camera Pad WB A eo 8 WE B 10 WE C A All parts and button instruction camera getting images of visitor and outdoor night viewing light identify the night visitor The indicator light the light is on when at work and is off when standby outdoor camera with battery only if the light is on it stands for charging otherwise the charging is over Speaker to hear the voice of the host indoor Call when pressed it automatically calls the indoor phone and starts the
10. ther the machine is ON Turn the switch to the ON 15 2 Indoor monitor 9 Working environment Working temperature 25 C 50 C Working humidity range less than 85 10 Maintenance of devices Keep the surface in tidy and use the soft dry cloth to clean the dust of the product Please turn off the power when cleaning the indoor device If there is spots hard to erase with dry cloth please use the soft towel dipped i in the neutral diluted detergent to clean the machine and then sweep it with dry cloth Do not use benzene thinner or organic solvents such as gasoline to clean as d these solvents may cause damage to the machine casing or surface color of the machine or the key w a i i a F WB C WE D 11 Notices All parts and button instruction The product should be placed in stable well ventilated air dry 1 TFT LCD display to show the image of visitor non sunshine non strong magnetic and non dusty environment 2 Speaker to hear the calling and the voice of the visitor ical ith sof l loth N TONO C CAN Ur AE Ea A A a Ee 3 Antenna to transfer the signal of voice and unlocking to the camera while Do not press several buttons at the same time oe receiving the signal of voice image and call from the camera Th r and indoor unit must be matched with appointed models Please ae Comeeorane s PP 4 Micro phone to transfer the visitor s voice to the camera do not match parts that are not our products 5
11. utomatically 1 2 3 4 5 WARRANTY TERMS amp CONDITIONS Our company warrants this Video Door Phone To The Original Purchaser To Be Free From Defects In Materials And Workmanship Within Six Months From The Date Of Purchase As Provided In The Warranty Card This warranty is subject to terms and conditions as mentioned below This warranty shall be valid only for the said period of 6 months as specified above The warranty period specified above shall include time taken for repairs replacement break downs transit time etc No notice of expiry of warranty will be given by the company This warranty will automatically terminate in the event of the said unit being serviced repaired installed de installed re installed by any person organization agency or by the said purchaser himself other than the authorized representative of the company Parts of the unit replaced or repaired under the terms of this warranty are warranted only for the remaining period of the original warranty period For attending any service call under this warranty all expenses incurred by the authorized representative dealer in collecting the said unit or any part thereof from any location and its return to the original location shall be borne by the purchaser 17 13 Accessories Indoor Monitor 1PCS Outdoor Camera 1PCS 12V 1A Power 1PCS 5V 1A Power 1PCS Electric wire for E lock 1PCS Remark The E lock is not included in
Download Pdf Manuals
Related Search