Dual Multi-UHF Wireless System
Contents
1. Mute On switch 0 Battery compartment Setting Up Insert the supplied AA batteries into the handheld transmitters by carefully unscrewing the base to reveal the battery compartment inside the microphone body connect the batteries ensure and are the correct way round for each cell and carefully screw the base back on The antennae may be connected directly to the TNC connectors on the rear panel or alternatively front mounted see below If the receiver is to be rack mounted unscrew the 2 front screws at each side of the case and use these to secure the rack ears provided These rack ears have apertures for front mounting the antennae if preferred and 2 TNC extension leads which should be connected from the TNC plug to the rear panel TNC connectors and attached using the threaded collars to the apertures in the rack ears creating 2 sockets for the antennae to connect onto Turn microphone levels down on the receiver A choice of mixed output of both microphones on 6 3mm jack or individual balanced XLR outputs is available on the rear panel of the receiver Connect jack or XLR optional leads to the relative output connector s turn down the volume of any equipment mixer amplifier etc that the signal will be fed into and then connect the jack or XLRs to the equipment 171 860 User Manual it Citronic Position the receiver within the best available line of sight to the transmitter s and connect the DC jack of th2. LEDs POWER and RF LEDs are lit but no AF and no sound sound from mic Microphone output is ORO E Microphone output is very low C 1622 DISPOSAL Neo Please dispose of the unserviceable device according to the current statutory requirement Errors and omissions excepted Copyright 2012 AVSL Group Ltd 171 860 User Manual
3. e supplied power adapter to the receiver and the plug top to the mains outlet Press and hold the Power button until the display lights showing the channel frequency and RF AF carrier audio status for each microphone Warning take care not to point microphones towards speakers this can cause damaging feedback loud whistle or howling noise try to point microphones away from the speaker cabinets Operation Move the switch on the first handheld transmitter fully upward half way is notched for mute status the display backlight should light for approximately 3 seconds and the LCD display will show the carrier frequency in MHz and battery status This frequency should match a frequency on one of the receiver channels If not see Tuning below Gradually increase the microphone level on the receiver then increase the volume on the mixer or amplifier until the sound from each microphone can be heard through the equipment Repeat for the second microphone Tuning Carrier frequency may be selected on the receiver unit using the A and buttons on each channel Pressing the SET button will send the channel data to the handheld transmitter via infra red and the display will show IR Hold the rear of the handheld transmitter close to the receiver with the switch facing away from the receiver When the IR signal is picked up by the handheld transmitter the display on the transmitter will flash with the new fre
4. it Citronic RU 26H Dual Multi UHF Wireless System Item ref 171 860 User Manual dh citronic t A F z a ibi citronic Version 1 0 an any group brand www avsl citronic com it Citronic Introduction Thank you for choosing the Citronic RU26H wireless system This professional wireless set provides 2 high quality microphones with PLL tuned UHF radio system for freedom of movement without loss of audio quality Please read this manual before using this equipment in order to avoid damage through incorrect operation and to get the best performance from your purchase Package Contents Dual UHF wireless receiver 19 rack ears 2 x antennae 2 x TNC antenna extension leads 2 x handheld transmitters Mains power adapter 6 3mm mono jack lead 4 x 1 5V AA battery If you find any accessory is missing or the product has arrived with any problems please contact your retailer at once This product contains no user serviceable parts so make no attempt to try to fix or modify this item yourself as this will invalidate the warranty We recommend you keep the original package and proof of purchase for any possible replacement or returned demand Warning To prevent the risk of fire or electric shock do not expose any of the components to rain or moisture If liquids are spilled on any component stop using immediately allow unit to dry out and have checked by qualified personnel before further use Avoid impac
5. quency In Use During use it may be useful for the reception of the microphone to be muted for a short period of time e g to avoid feedback when walking across the front of a speaker or avoid handling noise when placing the microphone down momentarily or adjusting a neckband microphone In these circumstances it may be better to move the transmitter switch to the MUTE position which maintains the radio frequency carrier signal but mutes the microphone input When this switch is moved back fully up the sound will be immediately restored without waiting for the radio signal to be reinstated If the wireless system is not to be used for more than a few seconds it is preferable to slide the transmitter switch to the OFF position which mutes and deactivates the radio signal and powers down the transmitter the display will show BYE Be sure to turn down the volume of the mixer or amplifier and then switch off the receiver Unplug signal leads from the receiver and mixer or amplifier when moving or packing away If the system is not to be used for long periods of time remove the batteries from the transmitters and unplug the power adapter from the receiver and the mains outlet Folding away or removing the antennae can also help avoid damage when the system is not in use 171 860 User Manual aot Citronic Weight receiver POWER LED does not light on receiver POWER LED is lit but no RF or AF
6. t or heavy vibration to any of the components dropping a microphone can cause capsule failure No user serviceable parts inside transmitter or receiver refer servicing to qualified service personnel Safety e Ensure that the correct adapter is used with adequate current rating and that the mains voltage is as stated on the adapter e Avoid ingress of water or particles into the transmitters or receiver e Use alkaline or NiMH batteries in the transmitters and remove if unused for long periods e Observe the correct polarity when replacing batteries Placement e Keep all components out of direct sunlight and away from heat sources e Do not place heavy objects on top of the receiver or transmitters e If rack mounting secure the receiver to a 1U rack tray and do not place heavy equipment above the receiver e Keep the transmitters and receiver away from damp or dusty environments Cleaning e Use a soft cloth with a neutral detergent to clean the body of the handheld transmitter and receiver e Lightly damp sterile wipes may be used on the microphone grille for hygiene purposes e To avoid damage do not use solvents to clean the components 171 860 User Manual aot Citronic Control Layout dio citronic Backlit LCD display Frequency Up button Frequency Down button Infra Red Frequency Set button Channel Volume rotary control Power button Antenna front mounting aperture Backlit transmitter display Off
Download Pdf Manuals
Related Search