Landing Light Driver User`s Manual (English)
Contents
1. Thomson Landing Light Driver Automation For 0 1 Watt to 5 Watt LEDs Dual Channel User s Guide Introduction The Thomson Automation dual channel landing light Driver is designed to drive up to 5 watt LEDs from a 5 volt switching signal You can connect the driver directly from either of our landing gear controllers Power for lighting is supplied through a separate connector The connectors are not polarized Do not connect the power backwards Specifications Name Landing Light Driver Part nr 1098LLD Control Voltage 3 6 Volt direct connection to 1041 or 1070 Landing Gear Controllers LED Supply Power 5 to 24 Volt Supply and LED voltage must be specified LED Direct connection to 3W power LED Supply current 100 to 550 ma per channel Weight 7 gm Size Width 47 mm Length 27 mm Accessories 1 Control cable for connecting a driver to a 1041 series LGCI 2 Control cable for connecting a driver to a 1070 or 1099 series LGCII Check for the latest version of this manual at http www thomson automation com Page 1 6 28 2011 user s manual rev 1 0 Connecting to 1041 series Landing Gear Controller Lighting Power g H LIMS TI 8601 Starboard Landing Light Port Landing Light To 1041 Landing Gear Controller Connecting to 1070 series Landing Gear Controller Connect lights and power as above Use a straight patch cable to connect the LC1 LC2 header on the driver to the R G F header on the LGCII T2. his connection is only needed when using high power LEDs needing more than 150ma each To 1070 e G1 55 1098 LGCII Log LL Switch Check for the latest version of this manual at http www thomson automation com Page 2 6 28 2011 user s manual rev 1 0
Download Pdf Manuals
Related Search