First Install - Emerson Climate Technologies
Contents
1. Johnson Yi First Install Controls First Install If there is no LogMan software installed on the PSION handheld computer PSION arrow keys are used for menu navigation If a LogMan application exists on the PSION handheld computer go directly from chapter 1 2 to chapter 1 8 The chapters 1 3 to 1 7 are only necessary the first time the PSION handheld computer is programmed or if the communication part of the LogMan programme is malfunction Install all software on your PC LogView Econnect Lite and LogMan software must be installed on the PC before proceeding See the LogMan user manual for details Connect the PSION to your PC with the supplied cable In the LogMan distribution there is a cable for connecting the PSION RS232 port to a PC COM port Switch the PSION on and press U Ctrl Del This command will reboot the PSION and it will write Insert Startup SSD and press Enter or press Menu for System Interface Press MENU for System Interface A pop up menu is now visible Select Command Processor and press Enter The PSION will switch to a System Screen with a M gt prompt Press MENU and select Special gt Remote link Enter A setup window will appear Switch the Link on with 115200 baud on port A Enter Use the arrow keys to navigate and change options to Remote link On Johnson Controls Denmark ApS i Global Container Efficiency Copyright Christian X s Vej 201 8270 H jbjerg Denmark J ohnson C2. ess enter Try to copy the software again LogView can then be closed Switch the PSION on and press U Ctrl Del This command will reboot the PSION and the LogMan software will start asking for registration code Key in the supplied code located on the back of the inner part of the LogMan and read the user manual Global Container Efficiency Revision 1 0 Updated 2011 04 18 Author Owner Project First Install Page 2 of 2 File f tp products reefer monitoring logman sw 238000 282 project masterbinder documentation logman manuals first install docx
3. ontrols Denmark ApS Phone 45 87 36 70 00 Fax 45 87 36 35 01 All Rights Reserved www myREFCON com gce support jci com Global Container Efficiency Revision 1 0 Updated 2011 04 18 Author Owner Project First Install Page 1 of 2 File f tp products reefer monitoring logman sw 238000 282 project masterbinder documentation logman manuals first install docx Johnson Y First Install Controls Baud rate 115200 Port A Start LogView from the PC menu Find LogView on the START menu and click with the mouse left button Use LogView Left Side browser to select LogMan SW The LogMan software is by default installed in C program files york logman srca And the left side browser in LogView must point to this directory Select the menu Retrieve gt Psion Link in LogView Find and click this menu in LogView and a PSION Link window will appear Select the command device and press Execute The command is Copy SW PC gt and the device is LOGMAN Be sure that the PSION is connected and switched on before clicking execute On some slow machines the connection program can be a bit slow on start up causing a timeout error but Then just press execute again If the PSION flash disks are write protected a write error will pop up Just remove the protection and try again If the PSION flash disks have been used before they might need to be formatted Type format a on the PSION and pr
Download Pdf Manuals
Related Search