PROFILO LED 150 USER MANUAL REL 1.0 ENG WORD
Contents
1. T S Illuminazione s r l ITALY http www dts lighting it 2 es The Lighting Company Made in Italy Le informazioni contenute in questo documento sono state attentamente redatte e controllate Tuttavia non assunta alcuna responsabilit per eventuali inesattezze Tutti i diritti sono riservati e questo documento non pu essere copiato fotocopiato riprodotto per intero o in parte senza previo consenso scritto della D T S D T S si riserva il diritto di apportare senza preavviso cambiamenti e modifiche estetiche funzionali o di design a ciascun proprio prodotto D T S non assume alcuna responsabilit sull uso o sull applicazione dei prodotti o dei circuiti descritti The information contained in this publication has been carefully prepared and checked However no responsibility will be taken for any errors All rights are reserved and this document cannot be copied photocopied or reproduced in part or completely without prior written consent from D T S D T S reserves the right to make any aesthetic functional or design modifications to any of its products without prior notice D T S assumes no responsibility for the use or application of the products or circuits described herein Les informations contenues dans le pr sent manuel ont t r dig es et contr l es avec le plus grand soin Nous d clinons toutefois toute responsabilit en cas d ventuelles inexactitudes Tous droits r2. m c m C mm CI Un a ENTER m m l ENTER c 15 L ENTER RESM To restore service and user default settings cc EXIT Exit from service menu 13 DMX PROTOCOL 2 CHANNELS MODE 1 SHUTTER STROBE 2 DIMMER DMX CHANNEL 1 Parameter SHUTTER STROBE DMX range Mid Point Move Range Mode Option Function Value DMX degrees value 000 009 Black out 010 019 Open 020 029 Black out 030 119 Strobe from 3 27 s to 30 ms 120 149 Pulse up from 42 6 s to 120 ms 150 179 Pulse down from 42 6 s to 120 ms Random strobe 180 204 Dimmer channel active Full independent Random Strobe 205 229 Dimmer channel disabled 230 255 Open DMX CHANNEL 2 Parameter DIMMER DMX range Mid Point Move Range Mode Option Function Value DMX degrees value 000 255 Proportional dimmer 16 The information contained in this publication has been carefully prepared and checked However no responsibility will be taken for any errors All rights are reserved and this document cannot be copied photocopied or reproduced in part or completely without prior written consent from D T S D T S reserves the right to make any aesthetic functional or design modifications to any of its products without prior notice D T S assumes no responsibility for the use or application of the products or circui
3. L nc gt E El It I Up Down LIFE TIME This menu show the total unit life time m t and the LED life time MENU Up Down SOFTWARE Software version CGL IL Sort amp runc cl gt 11111 SEL IS Om OFF ENTER ENTER ENTER ENTER ENTER ENTER ES Default OFF on ES Default 255 Internal unit temperature Celsius 14 12 SERVICE MENU For technical personnel only To operate this menu Connect the unit to the main While reset is running press the MENU and ENTER keys at the same time C C n Ce DS cen 5 ENTER 087 Pe ENTER LENS D PC or Fresnel E t o ENTER lens selection Du I Z Prod ProF ET PRODUCT 5 Product model selection PROFILO LED 150 Def or SCENA LED 150 eum 3 ENTER Up Down a CURRENT From min 20 mA to max 600 mA Default 300 mA UD LL 11 ENTER Up Down ZERO OFFSET From min 1 mm to max 50 mm Default 5 mm I i120 ES cAnO amp X isd ENTER RANGE From min 30 mm to max 150 mm Default 103 mm C gps Dp e Wan 5 rd ENTER Up Down wee LILI ENTER SPEED Maximum speed From min mm s to max 400 mm s Default 20 mm s ACCELERATION Maximum Acceleration Deceleration From min 1 mm s to max 400 mm s Default 10 mm s _o nca Ey ix rm 05802 LS RATIO Transmission ratio From min 10 mm turn to max 200 mm turn Default 2 58 2 mm turn 3
4. Using these functions it is possible to change some of the parameters and add some functions Changing the D T S setting can vary the functions of the unit so that it does not respond to the DMX 512 used to control it Carefully follow the instructions below before carrying out any variations or selections NOTE the symbol B shows which key has to be pushed to obtain the desired function Software version 1 21 7 T1 A Floor Agg i iS EU ISP i 057 a 2 ENTER Up Down AR Position ES REVERSE DISPLAY BH Suspended rg Reverses display s reading depending on Position di the mounting position on the ground or Di LI ispla suspended 087 St b 2 ES ES rid y i Displa To turn off the display after 5 seconds Or leave it always on nim ac LI Default DMX Mode Em n3 is EE en 2 Channels DMX MODE c H IS 1 DMX channel mode To select DMX mode 2 DMX channels mode default 1 DMX channel mode or manual mode P Manual mode can also be activated by pressing at n H ri IS Su T E IS Manual Mode the same time the UP DOWN buttons on unit display for 3 seconds A001 11 IS E z IS MENU Up Down t Ed E ENTER 087 Down An Default 0 ENTER ES Down NAH AH Default 100 IS Led Min Max Smooth Compression Sync and Boost level values settings cm IF 13 Range Off 20 ga 5 it H ENTER Up Down Default 24 ENTER LED MINIMUM VALUE Quadratic This menu allow to sel
5. flexibility of use and installation energy savings and component duration The dimming curves are similar to those of halogen lamps The connectors are Powercon In amp Out and 5 poles DMX In amp Out PROFILO LED 150 is contained in a strong housing with folded edges designed to resist all the rigors of continuous use PRODUCT CODES 03 TP012 PROFILO LED 150 2 13 5 303000K BI ack finish 03 TP013 PROFILO LED 150 2 13 5 30 4000 BI ack finish 03 TP014 PROFILO LED 150 2 13 5 30 5600 BI ack finish LED Technology 1 x White LED 3 000 x CRI gt 90 Also available as 4 000 and 5 600 K LEDs Optical group 13 5 30 linear zoom with high efficiency optica system Shutters Internal rotating system with four removable shutters Control 4 DMX channels LED display 4 soft keys Wireless ready Connectors Power supply Powercon In amp Out Connector DMX 5 poles In amp Out Connector Power supply Electronic full range AC 90 260 V 50 60 Hz 5 MAIN ELECTRICAL CHARACTERISTICS Input Voltage Range Vin 90 260 Vac Frequency 50 60 Hz Power Consumption Range 5 160 W Power Factor Pf 0 95 electronic PFC controller Efficiency 9596 typical Control Input Control Signal DMX 512 Dimming System Constant Current PWM Address Range DMX 512 channels addressable by display 6 ACCESSORIES As standard 1 x User s Manual 1 x POWERCON male cable connector D T S Code 0520P014 1 x XLR 5 pins
6. serv s Ce document ne peut tre copi photocopi ou reproduit dans sa totalit ou partiellement sans le consentement pr alable de D T S D T S se r serve le droit d apporter toutes modifications et am liorations esth tiques fonctionnelles ou de design sans pr avis chacun de ses produits D T S d cline toute responsabilit sur l utilisation ou sur l application des produits ou des circuits d crits Las informaciones contenidas en este documento han sido cuidadosamente redactadas y controladas Con todo no se asume ninguna responsabilidad por eventuales inexactitudes Todos los derechos han sido reservados y este documento no puede ser copiado fotocopiado o reproducido total o parcialmente sin previa autorizaci n escrita de D T S D T S se reserva el derecho a aportar sin previo aviso cambios y modificaciones de car cter est tico funcional o de dise o a cada producto suyo D T S no se asume responsabilidad de ning n tipo sobre la utilizaci n o sobre la aplicaci n de los productos o de los circuitos descritos 1 SYMBOLS 2 GENERAL WARNING 3 GENERAL WARRANTY CONDITION 4 TECHNICAL FEATURES 5 MAIN ELECTRICAL CHARACTERISTICS 6 ACCESSORIES 7 IMPORTANT SAFETY INFORMATION 7 1 Fire prevention 7 2 Prevention of electric shock 7 3 Safety 8 INPUT OUTPUT CONNECTIONS 9 DMX SIGNAL CONNECTION 9 1 DMX Addresses 9 2 Selecting the DMX address 10 FIRMWARE UPDATING 11 DISPLAY FUNCTIONS 12 S
7. male cable connector D T S Code 0508B028 1 x XLR 5 pins female cable connector D T S Code 0508B027 1 x Filterframe Black finish D T S Code 02M00420 46 Optional on request Iris D T S Code 03 TA201 Gobo holder B type D T S Code 03 TA202 Filterframe Black finish D T S Code 02M00420 46 C Clamp G60 Max Load 50 Kg Black finish D T S Code 05214004 C Clamp G60 Max Load 50 Kg Chrome finish D T S Code 0521A004 20 Safety wire mm x 60 cm D T S Code 05214010 DIMENSIONS Unit Dimensions Packing Dimensions LxWxH LxWxH 746 x 300 5 x 388 2 mm 810 x 350 x 360 mm Weight Weight 13 5 Kg 15 5 Kg 50 mm 300 5 mm 240 5 faa 4 N 4 N E 388 2 mm A 224 2 mm LCCC SS 746 mm 216 1 mm 7 IMPORTANT SAFETY INFORMATION 7 1 Fire prevention Never locate the fixture on any flammable surface Minimum distance from flammable materials 10 cm LN Minimum distance from the closest illuminable surface 30 cm q30cmf Replace any blown or damaged fuses only with those of identical value 3 15 AT 7 2 Prevention from electric ZA High voltage is present inside the unit Unplug the unit prior to performing any operation which involves touchin
8. ERVICE MENU 13 DMX PROTOCOL lol BIS COIN 10 15 1 SYMBOLS Graphic symbols used on this manual THIS SYMBOL INDICATES A HOT SURFACE THIS SYMBOL INDICATES ELECTRIC SHOCK RISK THIS SYMBOL INDICATES GENERAL RISK THIS SYMBOL MEANS DO NOT PLACE THE UNIT ON INFLAMMABLE SURFACES gt gt eD THIS SYMBOL INDICATES THE MINIMUM 3 Oc m DISTANCE TO BE KEPT BETWEEN THE DEVICE AND THE LIT OBJECT 2 GENERAL WARNING Read the instruction contained in this user manual carefully as they give important information regarding safety during installation use and maintenance The device is not for domestic use and must be installed by a qualified electrician or experienced person Always disconnect the device from the mains before maintenance The device must always be equipped with an efficient ground connection 3 GENERAL WARRANTY CONDITIONS The unit is guaranteed for 36 months from the date of purchase against manufacturing material defects 4 TECHNICAL FEATURES OVERVIEW PROFILO LED 150 is a professional shaper featuring a single high power White LED 3 000 K 1 800 Lux at 5 m and 13 5 30 linear z oom with high efficiency optical system PROFILO LED 150 features an internal rotating system with four removable shutters mounted between plates with anti abrasive surface The unit is wireless ready PROFILO LED 150 is a modern alternative to conventional theatre lights improving light quality
9. INK function u inL H under WIRELESS DMX MENU u id fi IH and press ENTER When PROFILO LED 150 is logged off the display is blinking meaning its available for log in on a new transmitter Logging out a PROFILO LED 150 Select UNLINK function Link H under WIRELESS DMX MENU td na and press ENTER When PROFILO LED 150 is logged off the display is blinking meaning its available for log in on a new transmitter Logging out all PROFILO LED 150 units linked to a transmitter Press and hold the function button of the transmitter for about 3 seconds When the display is blinking on PROFILO LED 150 it mean that the units are logged out Transmitter Status LED Flashing red green no dmx connected Solid green dmx signal detected and transmitted Fast flashing red green log in mode every free PROFILO LED 150 unit not logged in to any other transmitter will be logged on PROFILO LED 150 Status Display blinking not logged on to a transmitter free Solid display logged on to a transmitter and receiving dmx data 13 MENU Up Down EMERGENCY Emergency operating mode By setting Emergency mode it will be possible to select Dimmer intensity level that will then ran if DMX signal is missing or not available Usefull for Emergency EXIT L eii B E JgF5E E 5 DEFAULT SETTING To restore default settings E 0250 TEMPERATURE Internal unit temperature E gt MENU Up Down MENU Up Down
10. ect the minimum p IS ee ooo IF levels for white mid x SES LED MAXIMUM VALUE er This menu allow to select the maximum L nc Current output ENTER levels for white Range 610 Hz 10 M Eram Is These settings have priority Default 610 Hz on Master Dimmer channel PASE This menu allow to select the value of a E E de R the delay in milliseconds for Dimmer channel reaction to DMX or Program variation With BOOST active the LED S Off 25 ms Instant response to DMX current is set to Max value variation 30 more gain compared to 20 250 ms Smooth response to DMX BOOST Off variation Default Enabled COMPRESSION This menu allow to select between Linear current output or Quadratic current output for LEDs Default Quadratic SYNC This menu allow to adjust the PWM frequency value Hz in order to reduce flickering in the process of your camera recordings BOOST DRIVING This menu allow to increase the LED s current from Min to Max ICE iS Is d ii tt is mE 295 is DIMMER Dimmer intensity level Range 0 255 Active only if MODE 1 DMX channel mode Ds Note 5 Ss Down is LA Down ar ENTER External infrared remote sensor needed D T S Code ES 03 LA 016 INFRARED MODE Infrared remote control By activating Ir Mode it will be possible to navigate trought the unit functions by using the D T S infrared remote con
11. g the inside of the unit This equipment must be grounded do not connect to non grounded supplies The use of a thermal magnetic circuit breaker is recommended for each PROFILO LED 150 unit Use only AC supplies 90 260V 50 60 Hz PROFILO LED 150 should never be located in position exposed to rain or in areas of extreme humidity A good air ventilation is essential for proper equipment work 7 3 Safety The external surface of the unit may exeed 50 ne ver handle the unit until at least 5 minutes have elapsed since the unit was turned off Never install the unit in an enclosed area lacking sufficient air flow The ambient temperature should not exeed 40 C and s hould not be lower than 10 C 8 INPUT OUTPUT CONNECTIONS DISPLAY PANEL FUSE 3 15 AT MAINS AC OUTPUT 90 260V 50 60 Hz MAX 14 PROFILO LED 150 UNITS 230V MAX 7 PROFILO LED 150 UNITS 120V MAINS AC INPUT 90 260V 50 60 Hz DMX OUT XLR 5 Pins Male Panel Connector Female Panel Connector 9 DMX SIGNAL CONNECTION The unit operates using a digital DMX 512 signal Connection between the controller and the unit or between units must be carried out using a two pair screened g 0 5 mm Ensure that the conductors do not touch each other Do not connect the cable ground to the DMX connector chassis The plug housing must be isolated Connect the mixer signal to the DMX IN projector plug and connect it to the next projector by connecting t
12. he DMX OUT plug on the first unit to the DMX IN plug of the second one In this way all the projectors are cascade connected CONTROLLER STANDARD DMX 512 AP 12GND 2 DATA af FO 3 DATA 3 x If the display showing the DMX address flashes then one of the following errors has occurred DMX signal not present DMX reception problem For Installations where long distance DMX cable connections are needed we suggest to use a DMX terminator The DMX terminator is a male XLR 3 5 pins connector with a 120 ohm resistor Between pin 2 and 3 The DMX terminator must be plugged into the last unit DMX out panel connector of the DMX line PLACE A 120 OHM RESISTOR BETWEEN PIN 2 AND 3 OF A MALE XRL CONNECTOR AND PLUG IT INTO THE DMX OUT PANEL CONNECTOR OF THE LAST UNIT CONNECTED TO THE DMX LINE PIN 3 120 ohm PIN 2 9 1 DMX addresses PROFILO LED 150 can be controlled with 2 DMX channels In order to use the unit in 2 channels set the following addresses on the mixer Projector 1 A001 Projector 2 A003 If you want to select the next projector just add 2 Projector 3 A005 on Bas projector 011 9 2 Selecting the DMX address 1 Press the UP DOWN key until you reach the required DMX address The numbers on the display will start to flash but the new DMX address hasn t yet been set 2 Press ENTER to confirm your selection The numbers on the display will stop flashi
13. ng and the projector is now controlled by the new DMX address TIPS if you keep pushed the UP or DOWN keys the channels are calculated more quickly and you get a faster selection 2 Press ENTER to confirm your selection The numbers on the display will stop flashing and the projector is now controlled by the new DMX address 10 FIRMWARE UPDATING Warning This procedure require a base knowledge of Windows computer applications Please refer to an authorised D T S service centre To update the software version of the PROFILO LED 150 you need D T S RED BOX interface D T S Code 03 LA 008 USB DMX Driver for the D T S RED BOX interface D T S Firmware upgrade utility program The driver and the installation procedure are available in our web site www dts lighting it Updating the software version Please follow the procedure below to perform the update 1 Install the D T S RED BOX USB DMX driver on the PC you will use to update the unit software 2 Connect the D T S RED BOX interface to the PC by using a USB cable 3 Connect the D T S RED BOX interface to the fixture by using a DMX cable 4 Download the new software version into the unit by using D T S Firmware upgrade utility program 10 11 DISPLAY FUNCTIONS DFP Digital Function Panel 0 down up dimmer _ 3sec _ together mm Y DMX MAN v DISPLAY FUNCTIONS The PROFILO LED 150 display panel shows all the available functions
14. trol D T S Code 0514L008 NOT IMPLEMENTED ON PROFILO LED 150 12 ur E 9r om UdhH ERE SEL wee pm WIRELESS DMX uE Wireless Disabled Wireless DMX enabled disabled Unt IS By activating WDMX MODE it will be UNLINK LOG OUT possible to control PROFILO LED 150 via D T S ANTENNA Wireless DMX Transmitter cod 03 E1271 Active only on PROFILO LED 150 with Wireless on board Logging on PROFILO LED 150 WIRELESS DMX must be enabled on PROFILO LED 150 unit UdNH SELE S Un R To log on the PROFILO LED 150 in the WIRELESS system simply press and quickly release the function button on the transmitter The transmitter will start flashing rapidly red green scanning for new free receivers PROFILO LED 150 units When a PROFILO LED 150 logs on to the transmitter the LINK green light on transmitter starts to flash rapidly After approximately 10 seconds the transmitter will jump back to normal mode and continue transmitting data The PROFILO LED 150 now try to synchronize to the transmitter When synchronized to the transmitter 2 different modes are possible 1 Antenna transmitter has detected and transmits a DMX signal in this mode a solid green light is seen on the transmitter and solid display is seen on PROFILO LED 150 2 No DMX signal connected the Antenna transmitter will flash red green display blinking on PROFILO LED 150 To log PROFILO LED 150 off from a transmitter simply select UNL
15. ts described herein MADE IN The Lighting Company ISO 9001 2008 D T S quality system is certified to the ISO 9001 2008 standard D T S products are designed and manufactured at the D T S 05171200 D T S Illuminazione s r l Via Fagnano Selve 10 12 14 47843 Misano Adriatico RN Italia Tel 39 0541 611131 Fax 39 0541 611111 info dts lighting it www dts lighting it
Download Pdf Manuals
Related Search