8 SETUP MENU - SETUP
Contents
1. DAY TIME LIMITS 6H 15H 7H 15H Displays with the available DAY TIME LIMITS 8 3 SVAN 958 USER MANUAL 8 4 Selection of the extended mode EXT I O SETUP The EXT I O SETUP path MENU SETUP EXT I O SETUP enables the user to select the output or input device The additional output socket called EXT I O enables one to connect meter with another device On this socket the signal from the input or output of the analogue digital converter before the correction is available This signal can be registered using the magnetic recorder can be observed on the oscilloscope or can be used for triggering measurements It is possible to select three different modes ANALOG DIGITAL IN and DIGITAL OUT This position enables the user to set the proper parameters of the extended I O output In order to enter the window the user has to select the EXT I O SETUP text in the SETUP list using the lt A gt lt v gt or lt lt gt lt gt gt push buttons and press the lt ENTER gt EEYBORRE SETUP MEHU LOCK SETUP list in sound measurements with EXT I O SETUP text highlighted displayed inversely In the MODE position of EXT I O SETUP window three options are available ANALOG DIGITAL IN and DIGITAL OUT In order to select the proper mode the user has to press the lt lt gt lt gt gt push buttons The window is closed and the instrument returns to the SETUP list after pressing the lt ENTER gt with the confirmation of2. In order to enter the window the user has to select the STATISTICAL LEVELS text in the SETUP list using the lt A gt lt W gt or lt lt gt lt gt gt push buttons and press the lt ENTER gt one T STATISTICAL LEVELS windows The selection of the position in the window the proper Ni where i 1 10 is performed by means of the lt A gt lt Ww gt push buttons The selection of a number from 1 to 99 in all ten Ni positions is done by means of the lt lt gt lt gt gt push buttons with the step equal to 1 or by means of the lt lt gt lt gt gt push buttons together with the lt Shift gt one with the step equal to 10 The window is closed and the instrument returns to the SETUP list after pressing the lt ENTER gt with the confirmation of all settings made in the window or lt ESC gt push button ignoring all settings made there 8 11 Programming of the instrument s internal timer TIMER The TIMER path MENU SETUP TIMER enables one to programme the internal timer The instrument can be switched on by itself in the programmed time and can perform the measurements using the set up which was used before its switching off In order to enter the window the user has to select the TIMER text in the SETUP list using the lt A gt or lt lt gt push buttons and press the lt ENTER gt oo SETUP MEHU LOCK REFERENCE LEVELS EH IHTEGRATIOH STATISTICAL LEVELS SETUP list with TIMER text highli
3. gt gt push buttons The window is closed and the instrument returns to the SETUP list after pressing the lt ENTER gt with the confirmation of a change made in the window or the lt ESC gt push button ignoring a change made there The expressions used for the LEQ or RMS calculations are given in Appendix D When this option is selected in the case of sound measurements the value of the LEQ and SEL function does not depend on the detector time constant the results are displayed without the indicator of the detectors selected in the profiles o o RMS INTEGRATION RMS INTEGRATION LINEAR LINEAR J EXPONENTIAL C J EXPONENTIAL ce Displays with the available options of RMS INTEGRATION 8 8 SVAN 958 USER MANUAL When the EXPONENTIAL option is selected in the case of sound measurements the value of the LEQ and SEL function depends on the detector time constant the results are displayed with the indicator of the detectors selected in the profiles 8 9 Programming of the instrument s internal Real Time Clock RTC The RTC path MENU SETUP RTC enables one to programme the internal Real Time Clock This clock is displayed in the top right corner of the instrument s display In order to enter the window the user has to select the RTC text in the SETUP list using the lt A gt lt v gt or lt lt gt lt gt gt push buttons and press the lt ENTER gt oo SETUP EXT I O SETUP EEVBORRD SETUP MEHU LOC
4. KEYBOARD SETUP SETUP list with MENU LOCK text highlighted displayed inversely In this window three options are available NO LOCK PARTIAL and FULL LOCK In the case of default NO LOCK option all available positions in the menu are accessible due to the settings which were made The activation of PARTIAL results in locking access to the MENU options which are responsible for measurement parameters In the case of FULL LOCK no one position from the MENU lists is accessible and after attempt of enter MENU the MENU LOCK window appears on the display The MENU is available after unlocking it In order to activate the required option the user has to place by means of the lt lt gt lt gt gt push buttons the special character in the proper position In order to confirm the selection the lt ENTER gt push button has to be pressed Such pressing closes the window After pressing the lt ESC gt push button the window is also closed but all changes which were made are ignored a a a MENU LOCK MENU LOCK MENU LOCK HO LOCK HO LOCK HO LOCK PARTIAL PARTIAL ESI FART IAL FULL LOCK FULL LOCK FULL LOCK MENU LOCK windows with available options 8 6 SVAN 958 USER MANUAL 8 7 Setting the reference signal in vibration measurements REFERENCE LEVELS The REFERENCE LEVELS path MENU SETUP REFERENCE LEVELS enables the user to set the reference level of the signal in vibration or sound measurements The values which are
5. USB host s functions A Notice The converter SV55 serves as the RS 232 interface The SV 55 connection to the USB Host socket is detected and after successful detection the headphone icon is switched on The transmission using the SV 55 is possible only in the case when the instrument is not connected to a PC with the USB Device port SVAN 958 USER MANUAL A Notice The USB disk connected to the USB Host socket switches off the instrument s internal flash memory All file functions and remote commands are redirected to the USB disk The internal flash memory is activated after the disconnection between USB disk and the instrument 8 13 Introduction the filter coefficients for 1 1 OCTAVE and 1 3 OCTAVE analysis USER FILTERS SETUP The USER FILTERS SETUP path MENU SETUP USER FILTERS enable the user to introduce the values of the correcting coefficients taken into account in 1 1 OCTAVE or 1 3 OCTAVE analysis The results of the analysis can be modified by the introduced factors and so calculated TOTAL values for one or two active set to On sets of the filters presented on the display In order to enter the window the user has to select the USER FILTERS SETUP text in the SETUP list using the lt A gt lt v gt or lt lt gt lt gt gt push buttons and press the lt ENTER gt The texts which appear after pressing lt ENTER gt depends on the position set in the MODE window oOo SETUP RMS INTEGRATION
6. a change made in the window or lt ESC gt push button ignoring a change made there o o o EXT I0 SETUP _I 0 SETUP EXT I0 SETUP MODE ee OC OCT MOCE A DIGITAL OUT CHANNEL 1 L EXT I O SETUP windows with the different I O devices selection In the ANALOG mode the meter can send signals to the output device For example the signal can be observed on the oscilloscope from the selected CHANNEL The user has the opportunity to choose between CHANNEL 1 2 3 and 4 The selected channel is being connected to the extended I O port In order to enter this position the user has to select the CHANNEL text in the EXT I O SETUP list using the lt A gt lt w gt push buttons After selection of the CHANNEL the user has to press the lt lt gt lt gt gt push buttons The window is closed and the instrument returns to the SETUP list after pressing the lt ENTER gt with the confirmation of a change made in the window or lt ESC gt push button ignoring a change made there m oa oa oa EXT I 0 SETUP I 0 SETUP EXT I 0 SETUP EXT I 0 SETUP MODE MOCE MOCE AHALOG MODE ANALOG CHANNEL T E CHANEL E CHAEL E EXT I O SETUP windows with the channel selection for output signal In the DIGITAL IN mode the meter is connected to the output device which triggers it The measurements are started when on this input there is a triggering impulse In this mode the instrument works in EXT TRI
7. of the opened list The selection is confirmed and the list is closed after pressing the lt ENTER gt push button The list is closed without any confirmation after pressing the lt ESC gt push button ao ao LANGUAGE LANGUAGE Displays with LANGUAGE list 8 2 Return to the factory made settings CLEAR SETUP The CLEAR SETUP path MENU SETUP CLEAR SETUP enables the user to return to the producer s set up of the instrument In order to enter the window the user has to select the CLEAR SETUP text in the SETUP list using the lt A gt lt v gt or lt lt gt lt gt gt push buttons and press the lt ENTER gt After entering this position the request for the confirmation is displayed The position is closed without any action and the instrument returns to the SETUP list after pressing the lt ESC gt push button oo SETUP LAHGUAGE DAY TIME LIMITS EXT IO SETUP KEYBOARD SETUP MEHU LOCK SETUP list with CLEAR SETUP text highlighted displayed inversely 8 2 SVAN 958 USER MANUAL After entering the window the request for the confirmation is displayed The proper answer for the request is selected by means of the lt lt gt lt gt gt push buttons The instrument returns to the default set up after pressing the lt ENTER gt push button in the case when the answer YES was chosen oo oo CLEAR SETUP CLEAR SETUP P Are you sure P Are you sure YES i PES HO Displays with the request for the co
8. set here are taken into account during the calculations of the measurement results expressed in the logarithmic scale with the dB as the units In order to enter the window the user has to select the REFERENCE LEVELS text in the SETUP list using the lt A gt lt w gt or lt lt gt lt gt gt push buttons and press the lt ENTER gt The selection of a parameter which level has to be set is done by means of the lt A gt lt V gt push buttons SETUP list with REFERENCE LEVELS text highlighted displayed inversely 8 7 1 Setting the reference level of the acceleration signal ACC In the ACC the user can set the reference level of the acceleration signal It is possible to set the level from 1 ums to 100 ums with 1 ums step pressing the lt lt gt lt gt gt push buttons The step can be increased to 10 ums pressing the lt Shift gt with the lt lt gt lt gt gt push buttons In order to confirm the setting the lt ENTER gt push button has to be pressed Such pressing closes the window After pressing the lt ESC gt push button the window is also closed but all changes which were made are ignored o o o REFERENCE LEVELS REFERENCE LEVELS REFERENCE LEVELS ACCELERATI OH i REFERENCE LEVELS windows with the reference level setting of acceleration signal 8 7 2 Setting the reference level of the velocity signal VEL In the VEL the user can set the reference level of the velocity signal It
9. CITY 2168 nmrs ELOCITY 2168 nmrs ELOCITY 2168 nmrs DISPLACEMENT BRS OT SPLACEMEHT BESS OT SPLACEMENT PEENTE SOUND 20 uPa SOUND 20 Pa SOUND 28 Pa REFERENCE LEVELS windows with the reference level setting of displacement signal In the case of sound measurements the REFERENCE LEVELS window is used only to inform the user that the reference level of the acoustic signal is equal to 20 uPa After pressing the lt ESC gt or lt ENTER gt push buttons the window is closed E REFERENCE LEVELS ACCELERATION 106 umis v nms VELOCIT 18 DISPLACEMEHT 188 pa REFERENCE LEVELS window with the reference level of the acoustic signal 8 8 Selection of detector s type in the LEQ RMS calculations RMS INTEGRATION The RMS INTEGRATION path MENU SETUP RMS INTEGRATION enables the user to select the detector type for the calculations of the LEQ function in the case of sound measurements or the RMS function in the case of vibration measurements In order to enter the window the user has to select the RMS INTEGRATION text in the SETUP list using the lt A gt lt v gt or lt lt gt lt gt gt push buttons and press the lt ENTER gt oo SETUP DAY TIME LIMITS z F KEYBOARD SETUP MEHU LOCK REFERENCE LEVELS SETUP list with RMS INTEGRATION text highlighted displayed inversely Two options are available LINEAR and EXPONENTIAL The required parameter can be selected by means of the lt lt gt lt
10. GGER function In the DIGITAL OUT mode the meter is connected to the output device which has to be triggered In this mode the instrument works in TRIGGER PULSE function It is especially useful in the multi channel simultaneous synchronised measurements 8 4 SVAN 958 USER MANUAL 8 5 Selection of few push buttons modes KEYBOARD SETUP The KEYBOARD SETUP path MENU SETUP KEYBOARD SETUP enables one to programme the operation mode of the lt Shift gt lt Start Stop gt push buttons and to set the KEYLOCK option SETUP list with KEYBOARD SETUP text highlighted displayed inversely In order to enter the window the user has to select the KEYBOARD SETUP text in the SETUP list using the lt A gt lt W gt or lt lt gt lt gt gt push buttons and press the lt ENTER gt The selection of a parameter in all positions is done by means of the lt lt gt lt gt gt push buttons and confirmed by the lt ENTER gt one 8 5 1 Selection of the working mode of lt Shift gt lt Alt gt push buttons SHIFT MODE In the SHIFT the user can choose between Shift and 2nd Fun When the Shift text is selected the push button with this name operates as in the keyboard of a computer in order to achieve the desired result the second push button has to be pushed in conjunction with the lt Shift gt or lt Alt gt When the 2nd Fun text is selected the lt Shift gt push button operates in the sequence with the other one Thi
11. K REFERENCE LEVELS RMS IHTEGRATIOH SETUP list with RTC text highlighted displayed inversely The operation of the RTC setting is performed in the same way as it was described in the case of the FILE NAME window The selection of the setting parameter is performed using the lt lt gt lt gt gt push buttons and the change of its value using the lt A gt lt w gt push buttons The parameter which value has to be changed is flashing s oa RTC 13 02 25 RTC 13 50 52 RTC MB 41 32 13 FEE 2007 13 FEE 2007 13 MAR SES PRESS SH SH TO EPIT PRESS SH SH TO EDIT IPRESS SH SH TO EDIT RTC window A Notice The new value of a parameter is confirmed after each pressing of the lt A gt lt VW gt new value is selected without any confirmation from the lt ENTER gt push button The window is closed and the instrument returns to the SETUP list after pressing the lt ENTER gt or lt ESC gt push button 8 10 Selection of statistics levels to be saved in a file STATISTICAL LEVELS The STATISTICAL LEVELS path MENU SETUP STATISTICAL LEVELS enables the user to select ten statistics from one hundred calculated in the instrument to be saved in a file together with the main results of the measurements oOo SETUP KEYBOARD SETUP MEHU LOCK REFERENCE LEVELS RHS IHTEGRATIOH SETUP list with STATISTICAL LEVELS text highlighted displayed inversely 8 9 SVAN 958 USER MANUAL
12. NO To confirm the change the lt ENTER gt should be pressed After the selection of YES the instrument returns to the active mode of measurement result s presentation starting the new measurement process 8 15 SVAN 958 USER MANUAL After the selection of NO push button the instrument returns to the active mode of measurement result s presentation without starting the new measurement process 8 15 2 Excluding channel from vector calculations VECTOR SETTINGS The VECTOR SETTINGS warning appears on the display when the user changes mode of the channel from VIBRATION into SOUND path MENU INPUT CHANNELS SETUP MODE VIBRATION SOUND and the channel was included to the vector calculations path MENU INPUT AUXILIARY SETUP VECTOR SETUP CHANNEL x v In order to switch on the displaying of the message the user has to place by means of the lt lt gt lt gt gt push buttons the special character in the warning s position The window is closed and the instrument returns to the SETUP list after pressing the lt ENTER gt with the confirmation of a change made in the window or lt ESC gt push button ignoring a change made there oo oo HARMINGS HARMINGS RESULT HOT SAVED RESULT HOT SAVED l CYCLE REPEATS JJ CYCLE REPEATS VECTOR SETTIHGS VECTOR SETTIHGS cv WARNINGS windows with the selection of VECTOR SETTINGS o CHAHHEL S3 1 EXCLUDED FROM VECTOR CALCULATIONS TMCORR 8 16
13. RTC STATISTICAL LEWELS TIMER USE HOST SETUP USER FILTERS SETUP SETUP list with USER FILTERS SETUP text highlighted displayed inversely USER FILTERS SETUP gt MODE e VIBRATION e SOUND gt FILTER e VUSR1 VUSR2 VURS3 in the case of vibration measurements e SUSR1 SUSR2 SUSR3 in the case of sound measurements gt VIEW 0 80 Hz available values of 0 8 Hz centre frequency filter INF 100 0dB 100 0dB 1 00 Hz available values of 1 Hz centre frequency filter INF 100 0dB 100 0dB 20 0kHz available values of 20 kHz centre frequency filter INF 100 0dB 100 0dB gt EDIT 0 80 Hz available values of 0 8 Hz centre frequency filter INF 100 0dB 100 0dB 1 00 Hz available values of 1 Hz centre frequency filter INF 100 0dB 100 0dB 20 0kHz available values of 20 kHz centre frequency filter INF 100 0dB 100 0dB gt CLEAR Are you sure 8 12 SVAN 958 USER MANUAL 8 13 1 Selecting the mode for introduction of user filter coefficients MODE In the MODE it is possible to select VIBRATION or SOUND The selection is made with lt lt gt lt gt gt push buttons ao ao SPECTRUM BASED SPECTRUM BASED bie ITBRAT LON WUSR1 SPECTRUM BASED windows with MODE selection 8 13 2 Selecting the filter to be viewed edited or cleared FILTER In the FILTER there are VUSR1 VUSR2 VUSR3 in the case of vibration measurements and SUSR1 SUSR2 SUSR3 in the case of soun
14. SVAN 958 USER MANUAL 8 SETUP MENU SETUP The SETUP path MENU SETUP list contains different windows and positions Some of them are directly related with sound measurements some of them depend on the mode of the instrument sound or vibration meter and some are related with the settings of the instrument s hardware components In order to open the SETUP list the user has to e press the lt Menu gt push button e select from the main list using the lt A gt lt W gt or lt lt gt lt gt gt push buttons the SETUP text highlight it inversely e press the lt ENTER gt push button AUXILIARY FUNCTIONS Main list with SETUP text highlighted displayed inversely In the SETUP list the following items are available LANGUAGE CLEAR SETUP DAY TIME LIMITS EXT I O SETUP KEYBOARD SETUP MENU LOCK REFERENCE LEVELS RMS INTEGRATION RTC STATISTICAL LEVELS TIMER USB HOST SETUP USER FILTERS SETUP VIBRATION UNITS WARNINGS it enables the user to set language of the user interface it enables the user to return to the producer s set up except the coefficients set in the USER FILTERS it enables the user to select the hours limiting day and night for the calculation of the Lden result it enables one to connect meter with other device it enables the user to set the operating mode of the lt Shift gt and lt Start Stop gt push buttons and to switch on the KEYLOCK it enables the user
15. Z 8 de 5 BBHZ BBHZ 25Hz i i i 5 25Hz 6GHz x s 3 6BHz BBHZ BBHZ SBHZ 2 5 EDIT windows with the setting of the filter s coefficient 8 13 SVAN 958 USER MANUAL a a a EDIT UU EDIT UUSRi EDIT UUSRi A 6B a 2 dE 188 GB EDIT windows with the setting of the filter s coefficient cont 8 13 4 Clearing the coefficients of the user filters CLEAR The CLEAR enables the user to clear the values of the user coefficients of the selected octave or third octave filter In order to execute the CLEAR operation the user has to highlight the CLEAR text and press lt ENTER gt a a SPECTRUM BASED SPECTRUM BASED SPECTRUM BASED windows with CLEAR selected The ARE YOU SURE question appears on the display The coefficients of a set or sets are cleared after the selection of YES by means of the lt lt gt lt gt gt push buttons and after pressing the lt ENTER gt one After clearing the instrument returns to the SPECTRUM BASED window CLEAR FILTER CLEAR FILTER gri Are you sure P Are you sure YES Hol PES HO Displays with the request for the confirmation for CLEAR FILTER execution 8 14 Selection of the vibration units VIBRATION UNITS The VIBRATION UNITS path MENU SETUP VIBRATION UNITS enables the user to select the units for the vibration measurements In order to enter the window the user has to select the VIBRATION UNITS text in the SETUP l
16. d measurements The selection of a filter is made with the lt lt gt lt gt gt push buttons o o o SPECTRUM BASED SPECTRUM BASED SPECTRUM BASED MODE _WIBRATION MODE _WIBRAT ION FILTER EEA FILTER NE IEW VIEW ELIT ELIT CLEAR CLEAR o o o SPECTRUM BASED SPECTRUM BASED SPECTRUM BASED SOUND MOCE SOUND MODE SOUNE HAJ FILTER FILTER E IEW IEW DIT EDIT E CLEAR CLEAR b SPECTRUM BASED windows with the filter selection for vibration a and for sound b 8 13 3 Setting the coefficients of the user filters set EDIT After pressing the lt ENTER gt push button when the VUSR1 in the EDIT text is displayed inversely the window containing the status of the selected set and the values of the coefficients for all 1 3 OCTAVE filters is opened The status position informs the user that the set is switched on It is not possible to change the status oa a SPECTRUM BASED SPECTRUM BASED SPECTRUM BASED windows with EDIT selected The selection of the position in the set is performed by means of the lt A gt lt w gt push buttons The value is introduced by pressing the lt lt gt lt gt gt push buttons The window is closed and the instrument returns to the USER FILTERS SETUP window after pressing the lt ENTER gt with the confirmation of all settings made in the window or lt ESC gt push button ignoring all settings made there a EDIT VUSRA OBHZ Ae HdE OBHZ BBH
17. essing the lt Shift gt and lt v gt or lt Shift gt and lt gt gt results in a movement to the last position of the opened list In each available position any change is performed by means of the lt lt gt lt gt gt push buttons In order to confirm the selection the lt ENTER gt push button has to be pressed After this confirmation the opened window or list is closed In order to ignore any changes made in the opened window or list the user has to press the lt ESC gt push button oOo oOo SETUP SETUP MEHU LOCK STATISTICAL LEWELS CLEAR SETUP REFERENCE LEWELS TIMER DAY TIME LIMITS RMS INTEGRATIOW USB HOST SETUP IZO SETUP RTC USER FILTERS SETUP PEGE pe eee STATISTICAL LEWELS UIBRATIOM UNITS Displays with SETUP list 8 1 Setting the language of the user interface LANGUAGE The LANGUAGE enables one to select the language of the user interface In order to enter the list one has to press the lt ENTER gt push button on the inversely displayed LANGUAGE text of the SETUP list The selection is made by placing a special character by means of the lt A gt lt Y gt lt lt gt lt gt gt push buttons in the line with the selected language Pressing the lt Shift gt and lt A gt or lt Shift gt and lt lt gt push buttons results in a movement to the first position of the opened list and pressing the lt Shift gt and lt W gt or lt Shift gt and lt gt gt results in a movement to the last position
18. ghted displayed inversely The operation of the TIMER path MENU SETUP TIMER setting is performed using the lt lt gt lt gt gt push buttons and the change of its value using the lt lt gt lt gt gt push buttons pressed together with the lt Shift gt oa o TIMER TIMER TIMER MODE SINGLE REGULAR START DAY Hi MAR Hi FEE START TIME Bo 16 Be Be REPEAT TIME 24 00 REPEAT TIME 24 00 TIMER window A Notice The new value of a parameter is confirmed after each pressing of the lt lt gt or lt gt gt together with the lt Shift gt push buttons new value is selected without any confirmation from the lt ENTER gt push button The window is closed and the instrument returns to the SETUP list after pressing the lt ENTER gt or lt ESC gt push button 8 10 SVAN 958 USER MANUAL 8 12 Selection the USB HOST port functionality USB HOST PORT The USB HOST PORT enables one to programme the functionality of the instrument s socket named USB Host This function is under development oo SETUP REFERENCE LEWELS RMS INTEGRATION RTC STATISTICAL LEWELS TIMER SETUP list with USB HOST PORT text highlighted displayed inversely The socket USB Host can be used to serve as the input of the different interfaces RS 232 or USB The RS 232 interface in the SVAN 95x instrument is available as a hardware option a special interface named as the SV 55 with a dedicated micropr
19. hould be pressed In order to confirm the selection the lt ENTER gt push button has to be pressed Such pressing closes the window After pressing the lt ESC gt push button the window is also closed but all changes which were made are ignored 8 5 SVAN 958 USER MANUAL o o KEYBOARD SETUP KEYBOARD SETUP SHIFT MODE Shift SHIFT MODE START lt STOF KEYLOCK J KEYBOARD SETUP windows with the available settings in START STOP 8 5 3 Locking the keyboard KEYLOCK The KEYLOCK is switched on after placing the special character V in the inversely displayed position in the line with the KEYLOCK text In order to confirm the selection the lt ENTER gt push button has to be pressed Such pressing closes the window After pressing the lt ESC gt push button the window is also closed but all changes which were made are ignored ao ao KEYBOARD SETUP KEYBOARD SETUP SHIFT MODE 2rd Fun SHIFT MODE 2nd Fur START STOP Inverse START STOF Inyerse KEYLOCK KEYLOCK KEYBOARD SETUP window with the activation of KEYLOCK option 8 6 Locking the MENU MENU LOCK The MENU LOCK path MENU SETUP MENU LOCK enables the user to lock MENU partially or fully In order to enter the window the user has to select the MENU LOCK text in the SETUP list using the lt A gt lt W gt or lt lt gt lt gt gt push buttons and press the lt ENTER gt oo SETUP LANGUAGE CLEAR SETUP DAY TIME LIMITS EXT I 40 SETUP
20. is possible to set the level from 1 nms to 100 nms with 1 nms step pressing the lt lt gt lt gt gt push buttons The step can be increased to 10 nms pressing the lt Shift gt with the lt lt gt lt gt gt push buttons In order to confirm the setting the lt ENTER gt push button has to be pressed Such pressing closes the window After pressing the lt ESC gt push button the window is also closed but all changes which were made are ignored a a a REFERENCE LEVELS REFERENCE LEVELS REFERENCE LEVELS ACCELERATION 106 mis ACCELERATION 188 umis2f ACCELERATION 166 umis REFERENCE LEVELS windows with the reference level setting of velocity signal 8 7 3 Setting the reference level of the displacement signal DIL In the DIL the user can set the reference level of the displacement signal It is possible to set the level from 1pm to 100 pm with 1 pm step pressing the lt lt gt lt gt gt push buttons The step can be increased to 10 pm pressing the lt Shift gt with the lt lt gt lt gt gt push buttons In order to confirm the setting 8 7 SVAN 958 USER MANUAL the lt ENTER gt push button has to be pressed Such pressing closes the window After pressing the lt ESC gt push button the window is also closed but all changes which were made are ignored oa a ao REFERENCE LEVELS REFERENCE LEVELS REFERENCE LEVELS MECECERATTONS T09 Humse ACCELERATION 188 mist ACCELERATION 188 pmts L
21. ist using the lt A gt lt w gt or lt lt gt lt gt gt push buttons and press the lt ENTER gt oo SETUP RTC STATISTICAL LEWELS USB HOST SETUP USER FILTERS SETUP SETUP list with VIBRATION UNITS text highlighted displayed inversely It is possible to select the METRIC units e g m s m s m etc or NON METRIC units e g g ips mil etc The selection is done by means of the lt lt gt lt gt gt push buttons In order to confirm the selection the lt ENTER gt push button has to be pressed Such pressing closes the window After pressing the lt ESC gt push button the window is also closed but all changes which were made are ignored 8 14 SVAN 958 USER MANUAL o o VIBRATION UNITS VIBRATION UNITS H METRIC METRIC HOW METRIC C J HOH METRIC VIBRATION UNITS windows 8 15 Warnings selection WARNINGS The WARNINGS path MENU SETUP WARNINGS enables the user to select the messages which could be displayed during the operation of the instrument In order to enter the window the user has to select the WARNINGS text in the SETUP list using the lt A gt lt w gt or lt lt gt lt gt gt push buttons and press the lt ENTER gt oo SETUP STATISTICAL LEWELS TIMER USB HOST SETUP USER FILTERS SETUP UIBRATIOM UNITS SETUP list with WARNINGS text highlighted displayed inversely 8 15 1 Saving the measurement results in a file RESULTS NOT SAVED In order to switch on
22. nfirmation for CLEAR SETUP execution During the clearing process the message CLEARING SETUP is displayed The SETUP CLEARED message is displayed after the return to the default settings and the instrument waits for the user s reaction SETUP CLEARED PRESS AMY KEY Display after the execution of CLEAR SETUP function The window is closed and the instrument returns to the SETUP list after pressing any push button with an exception of the lt Shift gt and lt Alt gt 8 3 Day time limits selection DAY TIME LIMITS The DAY TIME LIMITS enables the user to select the required by the local standards determination of the day and night These limits are used for the calculation of the Lden function cf App D for the definition In order to enter the window the user has to select the DAY TIME LIMITS text in the SETUP list using the lt A gt lt W gt or lt lt gt lt gt gt push buttons and press the lt ENTER gt CLEAR SETUP EXT IO SETUP EEYBORRE SETUP MEHU LOCK SETUP list with DAY TIME LIMITS text highlighted displayed inversely Two options are available 6H 18H and 7H 19H The required limits can be selected by means of the lt lt gt lt gt gt push buttons The window is closed and the instrument returns to the SETUP list after pressing the lt ENTER gt with the confirmation of a change made in the position or lt ESC gt push button ignoring any change made there m o DAY TIME LIMITS
23. ocessor has to be attached to the socket USB Host An error occurs in the case of the connection to the socket the peripheral device of the different type than the selected one In order to enter the window the user has to select the USB HOST PORT text in the SETUP list using the lt A gt lt W gt or lt lt gt lt gt gt push buttons and press the lt ENTER gt one a USE HOST SETUP USB HOST SETUP window The selection of the socket s functionality is made with the lt A gt lt W gt or lt lt gt lt gt gt push buttons which move the special character between the available options The selection is confirmed after pressing the lt ENTER gt push button which closes the window and returns to the SETUP list The return to this list is also possible after pressing the lt ESC gt push button but the selection is not confirmed The USB host interface can be used to control the external USB memory disk USB DISK with the FAT16 or FAT32 file systems or IrDA Infra Red Data Association interface USB IrDA based on the dedicated circuit STIr4200 The first selection of the USB interface requires the introduction of the activation code after pressing the lt ENTER gt push button the ENTER CODE window appears on the display The next selection does not require any code a ENTER CODE o ENTER CODE HY134119 VALID CODE SH Delete SH i Insert JP SHt belete SH Insert Displays during the activation of
24. s mode is additionally signalled by the flashing Arrows icon on the top of the display which appears after pressing lt Shift gt or lt Alt gt push button in this mode and is flashing until any other push button with double meaning is pressed In order to select a desired mode of the lt Shift gt push button the lt lt gt lt gt gt should be pressed In order to confirm the selection the lt ENTER gt push button has to be pressed Such pressing closes the window After pressing the lt ESC gt push button the window is also closed but all changes which were made are ignored o pm KEYBOARD SETUP KEYBOARD SETUP SHIFT MODE ER Ean START STOP Hernal KEYLOCK KEYBOARD SETUP windows with the available settings in SHIFT MODE 8 5 2 Selection of the working mode of lt Start Stop gt push button START STOP In the START STOP path MENU SETUP KEYBOARD SETUP the user can choose between Normal and Inverse When the Normal text is selected the lt Start Stop gt push button operates as it is described in Chapter 2 the instrument reacts on each of its pressing starting or stopping the measurements When the Inverse text is selected the lt Start Stop gt push button operates in conjunction or in a sequence with the lt Shift gt one The measurements are started or stopped after pressing both push buttons In order to select a desired mode of the lt Start Stop gt push button the lt lt gt lt gt gt s
25. the displaying of the message the user has to place by means of the lt lt gt lt gt gt push buttons the special character in the warning s position The window is closed and the instrument returns to the SETUP list after pressing the lt ENTER gt with the confirmation of a change made in the window or lt ESC gt push button ignoring a change made there ao ao HARM INGS HARNINGS ULT HOT SAVED i RES RESULT HOT SAVED E CYCLE REPEATS 1j CYCLE REPEATS VECTOR SETTINGS C J PVECTOR SETTINGS C WARNINGS windows with RESULT NOT SAVE selected When the position is set to be active the special warning can be displayed on the display after pressing the lt Start Stop gt push button It will happen in a case when the result of the previous measurement was not saved in a file of the instrument The warning which will appear on the display is presented below LAST MEASUREMENT LAST MEASUREMENT LAST MEASUREMENT RESULTS HOT RESULTS HOT RESULTS HOT SAVED Continue SAVED Continue SAVED Continue SAVE NEXT Ma HO SAVE HEST YES IW Displays with the warning that the previous results were not saved and the confirmation The default value of this position is SAVE NEXT After pressing lt ENTER gt the instrument saves last measurement result The number of the file is increased by one in the comparison to the last saved file Using the lt lt gt lt gt gt push buttons one can change the value of the position to YES or
26. to lock the menu it enables the user to select the reference level for the vibration measurements and it informs the user about the reference level in the sound measurements it enables the user to select the way of integration for the RMS measurement in the case of vibration meter or the LEQ measurement in the case of sound level meter it enables the user to set the Real Time Clock window available only in the sound meter mode It enables the user to select ten statistics results to be saved in a file together with the main results cf the description of the files in App B This position is taken off from the menu in the vibration meter mode it enables the user to set the Timer function it enables the user to select the functionality of the USB Host port it enables the user to select switch on or off and set the correcting values for all 1 1 and 1 3 octave filters in the case of sound measurements in the case of vibration measurements the weighting filters are always switched on the user can set the correcting coefficients it enables the user to select the vibration units in which the results of the measurements are to be given it enables the user to switch on or off the warnings which can be displayed during the operation of the instrument 8 1 SVAN 958 USER MANUAL Pressing the lt Shift gt and lt A gt or lt Shift gt and lt lt gt push buttons results in a movement to the first position of the opened list and pr
Download Pdf Manuals
Related Search