Product Manual
Contents
1. Ci 75mm Interface A Note Please select the proper screws The distance between the back cover surface and the bottom of the screw hole is 8mm Please use a M4 screw ma PLANAR Start your Installation Remove the Back Cover Please follow these instructions to remove the cover on the back panel of the LCD so that you can connect the cables in Connector Ports B Back Cover 1 To remove the back cover follow the arrows in Figure A and press with both your thumbs The cover should be removed by pressing firmly 2 Follow the instruction on P 12 Figure 11 1 to connect the cables in Connector Ports B 3 Fix the cover back to the LCD You may also keep the cables in order with the included cable organizer Included Cable Organizer You can place the LCD flat horizontally to make it easier to connect the cables Please make sure that you place it on an even surface lest the LCD should be damaged by scratches or collision 10 ma PLANAR Connecting the Display Figure 11 1 11 2 Figure 11 2 needs to added for the USB port connection To setup this display please refer to the following figure and procedures 1 Be sure the computer and monitor are turned off 2 Connect the DC power cord to the power connector plug one end of the AC power cord into the power adapter and then the other end into an electrical outlet 11 10 3 Connect the VGA signal cable fro2. LCD Display Panel gt Controls Speakers Stand gt Rear View Inside the back cover Connector Ports B ma PLANAR Connector Ports A o 20000 a boob Power In Connector Ports B USB For PT1500M PT1501M For PT1500MU PT1501MU Touch Function LA PLANAR Kensington Security Slot The monitor can be secured to your desk or any other fixed object with Kensington lock security products The kensington lock is not included eT Kensington Security Slot ma PLANAR VESA Mount your monitor This monitor conforms to the VESA Flat Panel Mounting Physical Mounting Inter face Standard which defines a physical mounting interface for flat panel monitors and corresponding standards for flat panel monitor mounting devices such as wall and table arms The VESA mounting interface is located on the back of your monitor To mount the monitor on a swing arm or other mounting fixture follow the instruc tion included with the mounting fixture to be used Slots 75mm gt VESA Mounting
3. Auto Adjustment function to obtain an optimum image 6 4 Brightness Minus 1 Decreases the brightness of the display Minus image 2 Decreases value of the adjustment items o gt Brightness Plus 1 Increases the brightness of the display Plus image 2 Increases value of the adjustment items 6 Power Switch Switches on off the power of the LCD display Power LED 1 Green indicates the display is turned on 2 Amber indicates the display is in power saving mode 14 ma PLANAR How to Use the OSD Menus 1 Press the Menu button to pop up the on screen menu and to select between the four Main Menus 2 Choose the adjustment items by pressing the Select Auto button 3 Adjust the value of the adjustment items by pressing the 4 or gt button 4 The OSD menu will automatically close if you have left it idle for a pre set time 15 a PLANAR On Screen Display Menus Main OSD Menu w vw v v v v v SONAS INPUT ANALOG ECD ZAD USM ELLE RESOLUTION 1024x768 COLOR SM ERATURS M1 1072 Tone 60Hz SCO MICO DE COLOR LANGUAGE VOLUME OMER SETUR OSD TIMEOUT EXI Brightness Choose this function to adjust the brightness of the image Contrast Choose this function to adjust the contrast ofthe image LCD Adjustment Opens the LCD Adjustment sub menu where you can adjust the Clock Phase Horizontal Position and Vertical Position parameters Color Tempera
4. Display Colors 16 777 216 8bits color with FRC Power Input 100 240 VAC Full Range 50 60 Hz External AC adapter Maximum power consumption lt 30W 5W Standby Signal Input Video Signal Sync signals RGB positive 0 7VPP 75ohm Separate TTL Level Line horizontal freguency 31 5 kHz to 60kHz Raster vertical freguency 56 Hz 75 Hz Pixel dot clock 78 75MHz Recommended mode 1024 x 768 60 Hz Pedestal tilt 5 25 degress Dimensions W x H x D 382 5 x 384 3 x 180 1 mm Weight Operating Conditions Temperature Humidity Altitude 5 1 kgs 50 350 C 419 95 F 80 maximum 3658m Storage Conditions Temperature Humidity Altitude 20 60 C 49 140 F 80 maximum 12 193m 22 ma PLANAR Video Modes The monitor supports the following industry standard combinations of screen resolu tion and refresh rates Other combinations are possible but may require adjustments to the image For the optimal performance set your computer to a screen resolution of 1024 x 768 at a 60 Hz refresh rate Display Mode Hsync kHz Vsync Hz 640 x 350 31 5 70 640 x 400 31 5 70 VGA 31 5 60 640 x 480 37 9 72 37 5 75 35 2 56 37 9 60 SVGA 800 x 600 48 1 72 46 9 75 48 4 60 XGA 1024 x 768 56 5 70 60 75 US TEXT 720 x 400 31 5 70 Apple 640 x 480 A3 z MAC 35 67 832 x 624 49 7 75 1
5. Driver Installation 24 a PLANAR Usage Notice A WARNING To prevent the risk of fire or shock hazards do not expose this product to rain or moisture A WARNING Please do not open or disassemble the product as this may cause electric shock Safety and Use Precautions Follow all warnings precautions and maintenance as recommended in this User s Guide to maximize the life of your unit Do a Turn off the product before cleaning Q Use only a dry soft cloth or clean room wiper when cleaning the LCD panel surface Q Use only high quality and safety approved AC DC power adapter QO Disconnect the power plug from AC outlet if the product is not used for a long period of time a Do not touch the LCD panel surface with sharp or hard objects a Do not use abrasive cleaners waxes or solvents for cleaning a Do not operate the product under the following conditions Extremely hot cold or humid environment Areas susceptible to excessive dust and dirt Near any appliance generating a strong magnetic field Place in direct sunlight a PLANAR Introduction About Planar s PT1500M U PT1501M U The PT15 products all have a 15 flat panel screen with an active matrix thin flim transistor TFT liquid crystal display LCD Features include Q Q Direct analog signal input Active matrix TFT LCD technology 1024 x 768 XGA resolution 15 viewable disp
6. If this problem still exists use Phase to make an adjustment 19 ma PLANAR Warning Signal If you see warning messages on your LCD screen this means that the LCD display cannot receive a clean signal from the computer graphics card There may be two sources for this problem Please check the cable connections or contact Planar for more information gt No Signal This message means that the LCD display has been powered on but it cannot receive any signal from the computer graphic card Check all the power switches power cables and VGA signal cable gt Out of Range This message means that the signal of the computer graphic card is not compatible with the LCD display When the signal is not included in the Video Modes list we have listed in the Appendices of this manual the LCD display will display this message 20 lt PLANAR Product Dimensions 382 5mm 15 06 384 3mm 15 1 Front View 7 56 8mm 2 23 A DAS 180 1mm 7 1 Top View 21 Monitor Specifications ma PLANAR Item Specification LCD Module 15 in active matrix TFT anti glare coating 0 297 mm pixel pitch Display Size 304 mm x 228 mm Viewing Angle Left Right 60 60 left right Up Down 40 60 up down
7. 024 x 768 60 2 75 23 ma PLANAR Touch Screen Driver Installation Driver Installation for PT1500M Resistive Touch Screen with RS 232 Serial Connection Touch driver information is located on the enclosed CD ROM for the following operat ing systems Microsoft Windows XP Windows 2000 Windows NT 4 0 Windows Me and Windows 9X 1 Open the CD Rom 2 Select the link for your monitor model 3 The driver file will automatically open 4 Select the TW564SR4 exe file 5 Select unzip 6 Double click the setup exe file 7 Follow the installation instructions 8 If the touch screen driver does not automatically load restart the computer operating system Please read Readme txt located in the unzipped file folder for additional infor mation and assistance Driver Installation for PT1500MU Resistive Touch Screen with USB Con nection Please note These monitors are Microsoft Windows HID Human Interface Device compatible No additional software driver is required for general operation of the touch screen A special calibration tool can be installed for improved touch position accuracy See Optional MicroTouch USB HID Calibration Tool version 7 00 Installation Pro cess 24 ma PLANAR Optional Driver MicroTouch USB HID Calibration Tool Version 7 00 In stallation Process for PT1500MU Resistive Touch Screen with USB Connection Please note These monitors are Microsoft HID Human
8. Installation for PT1501MU Capacitive Touch Screen with USB Connection Touch driver information is located on the enclosed CD ROM for the following operat ing systems Microsoft Windows XP Windows 2000 Windows NT 4 0 Windows Me and Windows 9X If you have a USB cable connection disconnect the cable from the monitor or the PC before installing the driver 1 Open the CD Rom 2 Select the link for your monitor model 3 The driver will automatically open 4 Select the TW564SR4 exe file 5 Select unzip 6 Double click the setup exe file 7 Follow the installation instructions 8 Reconnect the USB cable 9 If the touch screen driver does not automatically load restart the computer operating system Please read Readme txt located in the unzipped file folder for additional infor mation and assistance 26 ma PLANAR Linux Driver Installation for PT1501MU Capacitive Touch Screen with USB Connection Touch driver information is located on the enclosed CD ROM Supported platforms include Red Hat Linux 8 0 Red Hat Linux 9 0 and SuSE Linux 8 2 and SuSE Linux 9 0 on Pentium compatible CPUs The following Xfree86 versions are supported 4 0 3 and 4 1 0 1 Open the CD Rom 2 Select the TwLinux5 62 1 folder 3 Double click the Readme txt file 4 Follow the driver selection and installation instructions Please read Readme txt located in the unzipped file folder for additional info
9. Interface Device compatible The calibration driver is not required for general operation of the touch screen This calibration tool is for optimization of touch performance for the touch screen to meet the 1 TPE accuracy specification The following Microsoft Windows operating systems are supported by this software driver Microsoft Windows 98SE Me 2000 and XP 1 Open the CD Rom 2 Select the PT1500MU Calibration Option link 3 The driver file will automatically open 4 Follow the installation instructions for the MicroTouch HID Calibration procedure Please read Readme txt located in the unzipped file folder for additional infor mation and assistance Driver Installation for PT1501M Capacitive Touch Screen with RS 232 Serial Connection Touch driver information is located on the enclosed CD ROM for the following operat ing systems Microsoft Windows XP Windows 2000 Windows NT 4 0 Windows Me and Windows 9X 1 Open the CD Rom 2 Select the link for your monitor model 3 The driver file will automatically open 4 Select the TW564SR4 exe file 5 Select unzip 6 Double click the setup exe file 25 ma PLANAR 7 Follow the installation instructions 8 Reconnect the USB cable 9 If the touch screen driver does not automatically load restart the computer operating system Please read Readme txt located in the unzipped file folder for additional infor mation and assistance Driver
10. VE PLANAR PT1500M U PT1501M U Touchscreen LCD Monitors USER S GUIDE www planar com The information contained in this document is subject to change without notice This document contains proprietary information that is protected by copyright All rights are reserved No part of this document may be reproduced translated to another language or stored in a retrieval system or transmitted by any means electronic mechanical photocopying recording or otherwise without prior written permission Windows is a registered trademark of Microsoft Inc Other brand or product names are trademarks of their respective holders Table of Contents Usage Notice Pr cautions 3 2 fiat Bain MR me MM Mae ee de DE De dome 1 Introduction About th Produ t z 2 54 td eng t ar an ra 2 Package OVervieW s nm Gee Bee ene dur SM ue mp el ere eas 5 Installation Product Overview s aaa ee 6 User Controls Front Panel Controls 14 How to Use the OSD Menus 15 On Screen Display Menus 16 Appendix Troubleshooting 19 Warning Signal auie i as e ae ne at ee on a alt tnt MPa ut oe 20 Product Dimensions 21 Monitor Specifications 22 Video Modesa ka a Audi Jiu Na dues a tirent Bon Dae ae tea rene 23 Touch Screen
11. lay area 31 5 60 kHz horizontal scan 56 75 Hz refresh rate Auto adjustment function Multilingual OSD user controls VESA DPMS power saving Kensingston security lock slot 75 mm VESA mount Durable touchscreen ma PLANAR Touch Screen for PT1500M U Resistive for finger and pen interface Q Q Surface Anti glare treatment Interface Serial PT1500M USB PT1500MU Durability 1 000 000 activations at a single point Hardness of surface 4H per ASTM D3363 92 Operating force Stylus lt 25 g average Finger lt 50 g average Transmissivity 85 2 typical Haze 5 Clarity 80 Driver Windows 95 98 Me NT 2000 XP Linux ma PLANAR Touch Screen for PT1501M U Capacitive for finger interface Q Q Surface Anti glare treatment Interface Serial PT1501M USB PT1501MU Durability 225 000 000 touches in a single location Hardness Cannot be scratched using any stylus with Mohs rating of less than 6 5 Transmissivity up to 88 at 550 nm Driver Windows 95 98 Me NT 2000 XP Linux MS HID compatible pointing device PLANAR Package Overview VGA Signal Cable Audio In Cable RS 232 Serial Cable for PT1500M PT1501M Sea USB Cable for PT1500MU PT1501MU User s Guide Landing Strip O Touchscreen Driver Installation CD ROM lt PLANAR Installation Product Overview Front View
12. m the display s VGA input connector to the 15 pin connector of your host computer and tighten the screws 11 18 4 Connect the Audio In cable from the audio input port of your display to the Audio out port of your computer 11 18 5 For the PT1500M and the PT1501M connect the RS 232 cable from the RS 232 port of your display to the RS 232 port of your computer 11 18 6 Forthe PT1500MU and the PT1501MU connect the USB cable from the USB port of your display to the USB port of your computer 11 28 A Notice To ensure the LCD display works well with your computer please configure the display mode of your graphic card to make it less than or egual to 1024 x 768 resolution and make sure the timing of the display mode is compatible with the LCD display We have listed the Video Modes of this LCD display in the appendix for your reference 11 PLANAR Figure 11 1 Power Adapter amp Power Cord 12 PLANAR Figure 11 2 i Audio In Cable USB Cable Power Adapter amp Power Cord 13 ma PLANAR User Controls Front Panel Controls m AUTO lt S O ES E a 2 A o e 0 No Icon Control Function O MENU Menu button Display the OSD menus SELECT AUTO Select Auto Select To select the adjustment items from OSD menus Auto To activate the
13. r mation and assistance 27 Customer Service Online Support http planar custhelp com Email desktopmonitors planar com Tel 1 866 PLANAR 1 1 866 752 6271 Hours m f 8am 9pm Eastern Time 2004 Planar Systems Inc Planar is a registered trademark of Planar Systems Inc Other brands and names are the property of their respective owners Technical information in this document is subject to change without notice P N 36 57709 003 Rev A
14. sables the display of information Reset Resets the display parameters back to its factory default settings 18 a PLANAR Appendix Troubleshooting If you are experiencing trouble with the LCD display refer to the following If the prob lem persists please contact your local dealer or our service center Problem No image appears on screen gt Check that all the I O and power connectors are correctly and well connected as described in the Installation section gt Make sure the pins of the connectors are not crooked or broken Problem Partial image or incorrectly displayed the image Check to see if the resolution of your computer is higher than that of the LCD display Reconfigure the resolution of your computer to make it less than or equal to 1024 x 768 Problem Image has flickering vertical line bars gt Use Clock to make an adjustment Check and reconfigure the display mode of the vertical refresh rate of your graphic card to make it compatible with the LCD display Problem Image is unstable and flickering gt Use Phase to make an adjustment Problem Image is scrolling Check and make sure the VGA signal cable or adapter is well connected Check and reconfigure the display mode of the vertical refresh rate of your graphic card to make it compatible with the LCD display Problem Vague image characters and graphics Use Clock to make an adjustment
15. ture Opens the Color Temperature sub menu where you can select the desired Color Temperature of the image ECO Mode Enables or disables the power savings mode Language Opens the Language sub menu where you can select the desired language of the OSD Other Setup Opens the Other Setup sub menu where you can adjust the Smooth OSD Position OSD Transparency OSD Time Out Volume and Mode Message parameters 16 lt PLANAR LCD Adjustment Sub Menu LCD ADJUSTMENT CLOCK PHASE HEPOSIMIO N WAL OS UA KO NT RETURN Clock Minimizes any vertical bars or stripes visible on the screen gt Phase Minimizes any horizontal distortion and clears or sharpens the displayed characters gt H Position Changes the horizontal position of the image V Position Changes the vertical position of the image 17 a PLANAR Other Setup Sub Menu v vw v w OTHER SETUP SMOL OSO POSITION OSD VAPOSNON OSLAURNSPARENTCNZ OSD WIMEOUL VOLUN MODIS MESSAGE RESIST RETURN O m Is El a Ga Smooth Adjusts the smoothness of the image OSD H Position Changes the horizontal position of the OSD OSD V Position Changes the vertical position of the OSD OSD Transparency Changes the opaqueness of the OSD background OSD Time out Adjusts the amount of time the OSD menu will be displayed for after inactivity Volume Adjusts the sound volume Mode Message Enables or di
Download Pdf Manuals
Related Search