Home

Camera - LevelOne

1. RTSP Switch the RTSP streaming On Off Note RTSP Real Time Streaming Protocol RTSP is supported by most of the media clients RealPlayer Media Player QuickTime etc Deinterlace Filter Switch the deinterlace filter on off Overlay Select to add Text Overlay or Privacy Mask on off the display screen Text Overlay Enables users to see some information on the display screen including Date Time and user defined text You can also change the background color Privacy Mask Enables users to conceal an area of the video image MPEG4 Computer View MPEG4 viewer port If RTSP mode is OFF Unicast streaming Video Audio port number Specify the transmission port number of the video data It is initially set to 8090 Specify an even number from 1024 to 65534 Image Size Specify the image size the network camera transmits You can choose among 704 x 480 352 x 240 and 176 x 120 for NTSC mode and 704 x 576 352 x 288 and 176 x 144 for PAL mode Frame rate Set the frame rate of the MPEG4 image Selectable values are 5 10 15 20 25 30 fps The unit fps stands for frames sent per second Quality Auto The quality and bitrate will be automatically decided according to the frame rate Fixed Quality The selectable values are Medium Standard Good Detailed and Excellent Fixed Bitrate Set the bit rate of MPEG4 image transmission for a line Selectable values are 64 128 256 384 512 768 1024 1280 153
2. IP CamLocator Uninstaller Upgrade X Factory default U Reboot d Search 8 Link to IE Hint You can click on the device listto select a device and click on function buttons to execute Click on Search to clean up the device list and search all devices within the same subnet again Main Menu Camera Click this button to get into common information of all Network cameras in network You can connect the specific Network cameras to get life video and to optimize video setting User Click this button to get into user basic setting information of all Network cameras in network You can connect the specific Network cameras to get and set basic values This section includes Info User Date Time TCP IP PPPoE and DDNS Note Only the administrator has access to the Settings About Click this button to get into information of IP CamLocator Camera The Camera page provides you LevelOne network cameras in the network with information including product name IP address MAC address model name and model ID Click on specific network cameras to optimize Video Setup including brightness contrast saturation and hue Fi 4 Netwonk Camera Configuration LEVELEINE O Camera a User About UPnP device list IP Address MAC Address Mod Name mel OA ID l B Setup 192 168 50 140 001166730639 FCS 1101 PoE IP C FCS 1101 z Upgrade X Factory default wW Reboot J search _ 5 Link to IE Hint You can
3. 4 You may not copy modify sublicense or distribute the Program except as expressly provided under this License Any attempt otherwise to copy modify sublicense or distribute the Program is void and will automatically terminate your rights under this License However parties who have received copies or rights from you under this License will not have their licenses terminated so long as such parties remain in full compliance 5 You are not required to accept this License since you have not signed it However nothing else grants you permission to modify or distribute the Program or its derivative works These actions are prohibited by law if you do not accept this License Therefore by modifying or distributing the Program or any work based on the Program you indicate your acceptance of this License to do so and all its terms and condi tions for copying distributing or modifying the Program or works based on it 6 Each time you redistribute the Program or any work based on the Program the recipient automatically receives a license from the original licensor to copy distribute or modify the Program subject to these terms and conditions You may not impose any further restrictions on the recipients exercise of the rights granted herein You are not responsible for enforcing compliance by third parties to this License 7 f as a consequence of a court judgment or allegation of patent infringement or for any other reason n
4. LevelOne FCS 4000 FCS 4100 FCS 4200 FCS 4300 FCS 4400 FCS 4500 Day Night P T Z IP Speed Dome Camera User Manual Ver 2 2 0 0809 Copyright c 2008 Digital Data Communications Co Ltd All Rights Reserved Before You Use This Product The use of surveillance devices may be prohibited by law in your country The Network Camera is not only a high performance web ready camera but also can be part of a flexible surveillance system It is the user s responsibility to ensure that the operation of such devices is legal before installing this unit for its intended use It is important to first verify that all contents received are complete according to the list in the Package Contents chapter Take notice of the warnings in Quick installation guide before the Network Camera is installed then carefully read and follow the instructions in the Installation chapter to avoid damages due to faulty assembly and installation This also ensures the product is used properly as intended The Network Camera is a network device and its use should be straightforward for those who have basic network knowledge The Troubleshooting chapter in the Appendix provides remedies to the most common errors in set up and configuration You should consult this chapter first if you run into a system error The Network Camera is designed for various applications including video sharing general security surveillance etc The How to Use chapter sugg
5. PPPoE settings You can change the PPPoE settings here See Hint for details IP CamLocator LEVELEINE PPPoE settings 192 168 50 140 PPPoE C On gt Of Previous DNS Setting IP Address G Jn DNG e iamas c Next UserID amp Password Primary DNS X Cane Confirm Secondary DNS Hint Please input correct PPPoE settings include login user ID password primary DNS and secondary DNS Press Next to continue Previous to go back Cancel to go to the main page DDNS settings You can change the DDNS settings here IP CamLocator LEVELEINE DDNS settings 192 168 50 140 Fir F DONE Con cor GSC A Server Name nto dives dyndns org gt Next UserID ome M d Confirm Hostname Hint Please input correct Dynamic DNS settings include login user ID password and registered DDNS Hostname Press Next to continue Previous to go back Cancel to go to the main page Apply settings Click on Apply to use the new settings IP CamLocator iguration LEVELOINE Apply settings 192 168 50 140 ron Previous Click Apply button to update the current settings and to selected A anniy device Or click Previous to modify changes T MNT iw Reboot system to apply new network settings Hint Make sure all settings are correct and valid Choose Reboot system to apply new network settings to reboot after the settings are applied
6. e When you set Obtain an IP address automatically DHCP make sure that the DHCP server is working on the network Use the following IP address Select this when a fixed IP address is set IP address Enter the IP address of the device Subnet mask Enter the subnet mask Default gateway Enter the default gateway Use the following DNS server address Select this when you set the fixed address as the IP address of DNS server Primary DNS server Enter the IP address of the primary DNS server Secondary DNS server Enter the IP address of the secondary DNS server if necessary HTTP port number Select 80 in general situations If you want to use a port number other than 80 select the text box and enter a port number between 1024 and 65535 Note e When you have set the HTTP port number to a number other than 80 on the Network setting page or in the Setup Program access the device by typing the IP address of the device on the web browser as follows Example when HTTP port number is set to 2000 http 192 168 1 100 2000 PPPoE Use this when you connect the device through PPPoE Point to Point Protocol over Ethernet PPPoE connection is the protocol that is widely used in xDSL digital affiliate line such as ADSL VDSL or SDSL as the authentication and connection system f HOME PPPoE On Off m IP address Y BASIC User ID System Password gt kj Camer ae camera Re type password ZU Network l O
7. kj Security Auto b Advance Interval 1 hours Time zone GMT 08 00 Taipei y OK Cancel Current date amp time This displays the current date and time of the device PC clock This displays the date and time of the monitoring PC clock Date amp time format Click the pulldown box to select among different time display formats including yyyy mm dd hh mm ss year month day hour minute second mm dd yyyy hh mm ss month day year hour minute second and dd mm yyyy hh mm ss day month year hour minute second Adjust Select one of four time adjusting modes Keep current setting Select this mode to keep the current date and time of the device Synchronize with PC Select this mode to make the date and time of the device the same as the monitoring PC Manual setting Select this mode to manually adjust the date amp time of the device Synchronize with NTP Specify the NTP server name and the Refresh Interval to synchronize the date and time of the device with those of the time server known as the NTP Network Time Protocol server Note e The NTP server Network Time Protocol is the time server which is an Internet standard protocol built on top of TCP IP that assures accurate synchronization to the millisecond of computer clock times in a network of computers NTP server name Type the host name or IP address of the NTP server up to 64 characters Time zone Select the time zone and time difference from G
8. June 1991 Copyright C 1989 1991 Free Software Foundation Inc 59 Temple Place Suite 330 Boston MA 02111 1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document but changing it is not allowed Preamble The licenses for most software are designed to take away your freedom to share and change it By contrast the GNU General Public License is intended to guarantee your freedom to share and change free software to make sure the software is free for all its users This General Public License applies to most of the Free Software Foundation s software and to any other program whose authors commit to using it Some other Free Software Foundation software is covered by the GNU Library General Public License instead You can apply it to your programs too When we speak of free software we are referring to freedom not price Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software and charge for this service if you wish that you receive source code or can get it if you want it that you can change the soft ware or use pieces of it in new free programs and that you know you can do these things To protect your rights we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights These restrictions translate to certain responsibilities for you if you distribute copies of the software
9. Obtain IP automatically DHCP If a DHCP server is installed on the network to select this while the IP address is assigned by the DHCP server Note e When you set Obtain IP automatically DHCP make sure that the DHCP server is working on the network Use the following IP Select this when a fixed IP address is set IP Address Enter the IP address of the camera Subnet mask Enter the subnet mask Default Gateway Enter the default gateway DNS Setting Obtain DNS server automatically If a DHCP server is installed on the network to select this while the DNS server is assigned by the DHCP server Use the following DNS server Select this when you set the fixed address as the IP address of DNS server Primary DNS Enter the IP address of the primary DNS server Secondary DNS Enter the IP address of the secondary DNS server if necessary PPPoE Use this when you connect the camera through PPPoE Point to Point Protocol over Ethernet PPPoE connection is the protocol that is widely used in xDSL digital affiliate line such as ADSL VDSL or SDSL as the authentication and connection system Z LEVELEINE O Camera User o About Load configuration File C From PC File From Device Current Setting 192 168 50 140 Info User Date Time TCP IP PPPoE DONS PPPoE On C Off DNS Setting IP Address UserID a C Use the following DNS server Password Primary DNS Confirm 5 1 Secondar
10. Password Set a password between 5 and 16 characters Confirm Re type the password to confirm Mode Set a user to Admin Operator or Viewer mode Viewer authentication Allows any viewer direct access to Live View Date Time IP CamLocator O Camera User o About Load configuration File C From PC File From Device Current Setting 192 168 50 140 Info User Date Time TCP IP PPPoE DDNS Current Setting c fi r Pcciock 00g 2433 S ror C Synchronize with PC C Manual setting 2008 1 1 00 00 00 C Synchronize with NTP NTP server name lv Auto Interval 01 hours Time zone GMT 08 00 Taipei 4 Apply cy Save Current date amp time This displays the current date and time of the camera PC clock This displays the date and time of the monitoring PC clock Adjust Select one of four time adjusting modes Keep current setting Select this mode to keep the current date and time of the camera Synchronize with PC Select this mode to make the date and time of the camera the same as the monitoring PC Manual setting Select this mode to manually adjust the date amp time of the camera Synchronize with NTP Specify the NTP server name and the Refresh Interval to synchronize the date and time of the camera with those of the time server known as the NTP Network Time Protocol server Note e The NTP server Network Time Protocol is the time
11. mico MEER ETE EE PERREEREREATREEEERTEEECEPENEEEPEEE ERE 65 PVA NAO erei NER T T mM 18 TrouDie shoo ng SDeeLss usa pent tede eaae E tbc Genes Sorat deeds 83 TECHNICAL F AraMelels iinsk pthc let mL setae E A EE E tak 84 GNU GENERAL PUBEIG BIOENSE iniecit eti E ehem od O 85 Package Contents FCS 4000 FCS 4100 FCS 4200 FCS 4300 FCS 4400 FCS 4500 Power Adapter Power amp A V Cable LAN Cable Alarm Cable CD Manual Utility Quick Installation Guide Si A A A A A G Functions and Operation directory Followed is the brief introduction of main functions and operations of LEVELONE IP SPEED DOME different operation platform may have different operating methods generally base on the manual Special operating demand please contact your dealers Pan Tilt Zoom Users can control camera up down left right via software commends In addition users can adjust the zoom to have best view for the desire target Auto focus and iris adjustment while seeing the far object Focus RPM auto matching technology With focus PRM matching technology the step motor will adjust the pan tilt speed automatically let the operation easier while zoom the far target Auto flips While tilting the camera at the vertical end the camera will rotate 180 automatically then turn to another side of 90 angle to see directly the back of object realizing vertical 180 surveillance Preset position set up and recall The preset position feature can store curren
12. mie ciem o Rc NE EE DOLOS 2 Functions and Operation directory eec ed oes us ie pF qu te IU UU ETE 2 Hardware Installation 3 29 ie atu clei o MI C MrcoLp a iar CO Rr Mo cist 4 Installation helle EET 4 FCS 4300 4400 4500Housing installation 4 FCS 4000 4100 4200Housing installation s 5 Camera installation 0 00 cccccecccccccccccccccecececcececccaceceaccaecueaesneceececneaueatenes 7 Bracket installation ccc cccecceccccceccececccucececceccecceaceneeceenecnecnecueaneaneaneases 9 Sotware Installallobes ioo de cries hee aa a ee bcr p E a 12 Install TES amisoecdio Gann meen eee Ree Re CRN ats Cn stc aio abico ihe aio 12 Install IP C am secl soscavi e eS aciei eed nessSRD i vit eto SMP eL EuDIE LACE CM DIE 13 Howto Use IP CamliOGSltOF Lu desetosuatibr dE neo EA Erud ies ERE eto nome Ro PUR E aencauanece Ei 15 Initial use IP Cam WOC iie EMT 15 Configuration of Main Console ccccccceccsecceeeceeceeeseeeaeeeeeeeeeseeeeeeaes 15 How to Access to the Network Camera cccccececececcccccecececeueneaueeececeneneavaneneneneanas 38 Initial accessing the network camera seseeeseeeerene 38 Configuration of Main Console um ecioeetuectoed ioci nent ocule iu ateccs oii esd tease 39 BaS oC 0 416 MER EON DO OT EST 44 PTZ Egi TERRE 62 Preset POSION 520b aoc stared n boviaatu Daten teeb iov eot yet teo do eo 63
13. Periodical sending General Home FTP client On Off eETTING FTP server name gt BASIC User name T Advance Password gs ED Re type password XU vending Passive mode On Off Periodical sendin OK Cancel J Test gt SMTP HTTP event b Schedule bj Alarm buffer Motion detection hj System Log FTP client function To activate the FTP client function select On The FTP client setting page appears When you do not wish to use the FTP client function select Off Note The frame rate and operability on the main viewer may decrease while a file is being transmitted by the FTP client function FTP server name Type the FTP server name to upload still images up to 64 characters or the IP address of the FTP server User name Type the user name for the FTP server Password Type the password for the FTP server Retype password To confirm the password type the same characters as you typed in the Password box Passive mode Set whether you use the passive mode of FTP server or not when connecting to FTP server Select On to connect to FTP server using the passive mode Attached file type Set attached file type to MJPEG or MPEG4 Alarm sending Set to forward the image and audio file to the specified FTP server linked with the alarm detection by the external sensor input or by the built in motion detection function Select On to send the image and audio file to FTP server linked with the alarm dete
14. THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES This product incorporates open source code into the software and therefore falls under the guidelines governed by the General Public License GPL agreement Adhering to the GPL requirements the open source code and open source license for the source code are available for free download at hitp global level1 com If you would like a copy of the GPL or other open source code in this software on a physical CD medium LevelOne Digital Data Communications offers to mail this CD to you upon request for a price of US 9 99 plus the cost of shipping ex CE MES83
15. Upgrade x Upgrade Choose a network camera click on Upgrade to upgrade the firmware You have to key in the username and password of the administrator to enter the upgrade page The following screen will display IP CamLocator Upgrade 192 168 50 140 IP Address MAC Address Mod ID 48 Previous IP Camera 132 158 50 140 001166 730633 FCS 1101 Ok Image file name EA Browse Image version Hint Click on Browser button to select the file you want to upgrade and check the package image information Click on Upgrade to start upload valid image onto selected device Choose the firmware image file you want to upgrade and press Upgrade to start The device will automatically reboot after upgrade Factory Default Factory default aae ey Choose a network camera click on Factory default to reset the configurations to default You have to key in the user name and password to use the factory default function IP CamLocator O Camera a User About UPnP device list Mod ID qs Setup FCS 1101 Upgrade X Factory default IPCamManager U Reboot The target will be rebooted Ave you sure d Search Link to IE Hint You can click on the device listto select a device and click on function buttons to execute Click on Search to clean up the device list and search all devices within the same subnet again Click on OK to continue The device will automatically
16. butfer Motion detection ceauruvucrccutu System Log General Tour name Rename the tour name Tour position Order There are 8 orders to select for camera directions Select Pos There are up to 32 preset positions to choose for each order Recall When you click Recall the camera moves to position of the selected preset number Clear When setting specific preset number position to tour click Clear to clear this direction information Clear All Be careful When you click Clear All it will clear this tour all information out Set Use it to save the camera position to a preset number Set as default tour Click it on to set this tour as default Tour Start To click Tour Start and the camera moves on patrol tour Tour Stop While the camera moves on patrol tour click Tour Stop to stop the patrol tour Carry out the following steps 1 Click Order to choose one of eight orders 2 Click Select Pos to set the preset position 3 Click the SET The tour position is saved 4 Follow the steps to set the other orders 5 Click the OK to save the tour FTP Client Use this menu to set up for capturing and sending images to an FTP server By using FTP client function you can send the image and audio file which has been shot and recorded linked with the external sensor input or with the built in motion detection function to FTP server FTP client setting menu is composed of two tabs General Alarm sending and
17. in red in the search screen you can still use setup to change the configurations of these cameras System Information The system information is displayed IP CamLocator leve Network Cameo ra M alandtelllsazhiilela LRL C E i BAV F E m N F4 System information 192 168 50 140 em Previous co Next Product Name FCS 1101 PoE IP Camera Firmware Version LM 1 6 16 0081 Web version LM 1 5 15 00B1 X Cancel Hint System information displays device product name firmware and Web version Press Next to continue Previous to go back Cancel to go to the main page Account settings The account setting is displayed You can change the account setting here IP CamLocator Account settings 192 168 50 140 User name Password Confirm v Previous Administrator root Admit ceo User 1 Next User 2 User 3 X Cancel User 4 User 5 User 6 User 7 User 8 User 8 Viewer authentication On C Off Hint To change the authentication account type the new account and password and select security mode in fields Press Next to continue Previous to go back Cancel to go to the main page Date Time settings You can set the date time of the network camera here See Hint for details IP CamLocator LEVELEINE Date Time settings 192 168 50 140 em Previous c Next Current Setting PC clock Adjust Keep current setting C Synchronize
18. or if you modify it For example if you distribute copies of such a program whether gratis or for a fee you must give the recipients all the rights that you have You must make sure that they too receive or can get the source code And you must show them these terms so they know their rights We protect your rights with two steps 1 copyright the software and 2 offer you this license which gives you legal permission to copy distribute and or modify the software Also for each author s protection and ours we want to make certain that everyone understands that there is no warranty for this free software If the software is modified by someone else and passed on we want its recipients to know that what they have is not the original so that any problems introduced by others will not reflect on the original authors reputations 85 Finally any free program is threatened constantly by software patents We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses in effect making the program proprietary To prevent this we have made it clear that any patent must be licensed for everyone s free use or not licensed at all The precise terms and conditions for copying distribution and modification follow GNU GENERAL PUBLIC LICENSE Terms And Conditions For Copying Distribution And Modification 0 This License applies to any program or other work which contains a notice placed b
19. server which is an Internet standard protocol built on top of TCP IP that assures accurate synchronization to the millisecond of computer clock times in a network of computers NTP server name Type the host name or IP address of the NTP server up to 64 characters Time zone Select the time zone and time difference from Greenwich Mean Time in the area where the camera is installed from the pulldown box TCP IP O Camera User o About Load configuration File C From PC File From Device Current Setting 192 168 50 140 Info User Date Time TCP P PPPoE DDNS Http Port Port80 C others 1024 65535 MAC Address 00 11 6B 73 06 38 IP Address DNS Setting Obtain IP automatically DHCP Obtain DNS server automatically C Use the following IP C Use the following DNS server IP Address Primary DNS Subnet mask Secondary DNS Default Gateway P Apply E Save HTTP Port Select port 80 in general situations If you want to use a port number other than 80 select the text box and enter a port number between 1024 and 65535 Note e When you have set the HTTP port number to a number other than 80 on the Network setting page or in the Setup Program access the camera by typing the IP address of the camera on the web browser as follows Example when HTTP port number is set to 2000 gt http 192 168 0 100 2000 MAC Address Display the MAC address of the camera IP Address
20. the power is turned on turi ms a Setting Set Use it to save the camera position to a preset number Carry out the following steps 1 Move the camera to the position to be saved while you are checking the image with the main console 2 Write the preset position name in Preset Pos Name text box 3 Click the SET The camera position is saved 4 If want to set this position as home position click Home option on Click the SET The camera position is saved as home position Note e Setting the new Home position will replace previous Home position Reset When writing the preset position name in Preset Pos Name text box press Reset to clean filed words Delete All Be careful When pressing Delete All all Preset Position information will be deleted Delete Select a preset number from 1 to 32 in the list box Use it to delete specific number 63 preset position setting Patrol There are four patrol tours to set for composing different preset positions Each one lists up to 8 positions which can be programmed and the camera moves to the programmed positions sequentially The camera stops when it moves to the last preset position amp HOME Tour Name Guerdtourt SETTING j BASIC Tour Position y Advance Set as default tour FTZ control Preset position eG cc Patral Tour 2 Tour 9 Tour 4 FTP client pm oW m mm wr SMTP HTTP event Schedule OK Cancel Alarm input Alarm
21. to Live View HTTPS HTTPS is a URI scheme used to indicate a secure HTTP connection It is syntactically identical to the http scheme normally used for accessing resources using HTTP Using an https URL indicates that HTTP is to be used but with a different default TCP port 443 and an additional encryption authentication layer between the HTTP and TCP You can use the IP camera through HTTPS easily by using https instead of http Create self signed certificate Ha certificate installed Properes Set Policy i Create amp Install Create a self signed certificate for HTTPS to recognize Installed Certificate Display or remove the properties of the installed certificate HTTPS Connection Policy Set HTTPS connection policy for different level of users Advance PTZ Control In this section it provides Pan Tilt Zoom Focus Iris and Auto Pan speed control setting saved as well as the Protocol Baud rate and Address which depend on Speed Dome control module Setting Pan speed Use it to move bar from 0 to 100 Tilt speed Use it to move bar from 0 to 100 Zoom speed Use it to move bar from O to 100 Focus speed Use it to move bar from 0 to 100 Iris speed Use it to move bar from O to 100 Auto Pan speed Use it to move bar from 0 to 100 62 Preset Position In this section up to 32 Pan Tilt and Zoom positions can be saved as well as the home position which the camera faces to when
22. to install Please select a setup type Complete n All program lealurez vell be instaled Requres the most disk space d Depan 108 23 MB of space required on the C die BET 24 MB ol space axalable on the C den 4 You may install the system to the directory of your preference and choose which feature s you want to install to the PC Hint You may for instance install only Playback and or LiveView on the PC at home or other remote site from which you do not install the camera but are going to watch them remotely How to Use IP CamLocator This chapter introduces how to monitor the image from the camera using IP CamLocator The LevelOne video server and Network camera can be used with Microsoft web browsers and IP CamLocator in Windows operation systems This document focuses on introducing IP CamLocator Initial use IP Cam Locator Click Start gt Program Files gt LevelOne gt IP Cam Locator gt IP Cam Locator F Accessories m Eset Programs T E ww Uwe Documents gt fan Games Ce Settings e dal O ES Internet Explorer 2 po Search gt S Outlook Express Remote Assistance Q 9 Help and Support windows Media Player E 7 Run EY Windows Movie Maker 9 SB MSN Messenger 7 5 2 Log Off jennet CI WinRAR germ fm LevelOne fn IP CamLocator Ei IP CamLocator gt o Turn Off Computer
23. to the subject Message Type the text of the E mail up to 384 characters A line break is equivalent to 2 characters Alarm sending Set to send the mail with connection to the alarm detection by the external sensor input or by the built in motion detection function y Home Alarm sending o On Off SETTING File attachment On Off hj BASIC Image file name vj Advance suffix None Date Time Sequence number b gt clier l n E AEE citent Sequence number clear Clear j SMTP E E EE ET 7 Alarm V Motion detection Motion detection General Use alarm buffer Alarmbutter Periodical sendin HTTP event Effective Period Always M scheuwie Schedule b Alarm buffer I Y IK Cancel Motion detection RA PAM E b System Log Alarm sending Select On to set to send mail with connection to the alarm detection File attachment Set whether an image file is attached to the mail sent or not When On is selected the image file made by the settings below is attached When Off is selected only the message is sent Image file name Type the file name you want to assign to the image to attach a mail You can use up to 10 alphanumeric hyphen and underscore for naming Suffix Select a suffix to add to the file name None No suffix is added The Image file name is assigned to the image to be sent via an e Mail Date amp time The date amp time suffix is added to the
24. you do not select it only the image of the moment of the alarm detection is forwarded Click Alarm buffer to display the Alarm buffer setting menu For details see Setting the Alarm Buffer Alarm buffer setting Menu on page Effective period Set the period when the periodical sending is effective Always The periodical sending is always effective Schedule You can specify the period when the periodical sending is effective in the schedule setting in the other section Click Schedule and the setting menu for the effective period is displayed Schedule When you click Schedule on the Advanced mode menu the Schedule setting menu appears This is the same menu as the setting menu which is displayed when you click Schedule to set Effective period and Schedule in FTP client setting menu e Mail SMTP setting menu Alarm out setting menu and so on Example When setting e Mail SMTP the alarm sending in the Schedule setting menu Schedule selection FTF Alarm v f HOME Mon Starttime oo 00 Endtime 4 00 SETTING Tue Starttime jon 00 End time 24 00 gt BASIC Wed Starttime oo ho Endtime 4 loo Y Advance Thu Starttime oo n Endtime 4 loo E PTE cient Fri Start time m J00 End time 24 n0 P SMTP Sat Starttime oo nn Endtime 4 loo HTTP event Sun Starttime 00 00 Endtime 4 100 Yj Schedule m REEE Use the same time schedule every day
25. 024 to 65534 Time To Live Set the maximum TTL that multicast can pass through MPEG4 viewer port If RTSP mode is OFF Unicast streaming Video Audio port number Specify the transmission port number of the video data It is initially set to 8090 Specify an even number from 1024 to 65534 Image Size Specify the image size the network camera transmits You can choose among 704 x 480 352 x 240 and 176 x 120 for NTSC mode and 704 x 576 352 x 288 and 176 x 144 for PAL mode Frame rate Set the frame rate of the MPEGA image Selectable values are 5 10 15 20 25 30 fps The unit fps stands for frames sent per second Quality Auto The quality and bitrate will be automatically decided according to the frame rate Fixed Quality The selectable values are Medium Standard Good Detailed and Excellent Fixed Bitrate Set the bit rate of MPEG4 image transmission for a line Selectable values are 64 128 256 384 512 768 1024 1280 1536 and 2048 kbps Note The selected frame rate and bit rate are a tentative value The actual frame rate and bit rate may be different according to the image size the shooting scene or the network condition Mobile View fy HOME RTSP RTSP port 554 8554 1024 65535 SETTING RTP Unicast streaming Y BASIC Portrange 3000 1024 65532 11333 1027 65535 a z system Multicast streaming On Off Y Camera Multicast address 226 0 0 1 General Video port Auto
26. 10000 1024 65535 Y MPEG4 Audio port Auto 11000 1024 65535 ss iis Time To Live 15 1to 255 mcs Image Size MJPFEG b Network Frame rate 5 fps l Quality bj Security Auto bj Advance Fixed quality Fixed bitrate 64 kbps OK Cancel RTSP If RTSP mode is ON RTSP port Specify the transmission port number of RTSP streaming video Default value is 8554 RTP If RTSP mode is ON Unicast streaming Unicast streaming Video Audio port range Specify the transmission port range of RTP streaming video RTP will select a port randomly from the range Multicast streaming Multicast address Specify the multicast server address Video Audio Port Specify the transmission port number of the video data It is initially set to 10000 and 11000 Specify an even number from 1024 to 65534 Time To Live Set the maximum TTL that multicast can pass through Image Size The Image size of Mobile view is fixed at 176x120 J Frame rate Set the frame rate of the MPEG4 image Selectable values are 5 10 15 20 fps The unit fps stands for frames sent per second Quality Fixed Bitrate Set the bit rate of MPEG4 image transmission for a line Selectable values are 64 32 and 16kbps MJPEG 704x480 15 OK Cancel Note MJPEG settings are unavailable if the RTSP mode is ON which means the MJPEG streaming is closed MJPEG viewer port Unicast streaming Video Audio port num
27. 6 and 2048 kbps Note he selected frame rate and bit rate are a tentative value The actual frame rate and bit rate may be different according to the image size the shooting scene or the network condition fu HOME RTSP RTSP port 554 1024 65535 SETTING Viewer authentication On Off v BASIC RTP Unicast streaming b System Portrange 5000 1024 65532 7999 1027 65535 E samera Multicast streaming On Off ee Multicast address 228 0 0 1 up Sct Video port Auto 6000 1024 65535 s Audio port Auto 7000 1024 65535 Mobile view Time To Live 1 5 1to 255 MJPEG gt Network Image Size 4x48l v Frame rate 5 fps b Security Quality j TOM 5 Advance O Auto Fixed quality Excellent Fixed bitrate kbps OK Cancel RTSP If RTSP mode is ON RTSP port Specify the transmission port number of RTSP streaming video Default value is 554 Viewer authentication If the viewer authentication is ON users viewing through RTSP will be requested to key in username and password RTP If RTSP mode is ON Unicast streaming Unicast streaming Video Audio port range Specify the transmission port range of RTP streaming video RTP will select a port randomly from the range Multicast streaming Multicast address Specify the multicast server address Video Audio Port Specify the transmission port number of the video data Specify an even number from 1
28. Administrator may differentiate the Network cameras with the model number and MAC address IP CamLocator LEVELEAINE O Camera a User About UPnP device list T Name IP Address MAC Address Mod Name mmm Mod D S Setup P Camera 192 168 50 140 001166730639 FCS 1101 PoE IP Camera FCS 1101 Upgrade X Factory default U Reboot d Search 8 Link to IE Hint You can click on the device listto select a device and click on function buttons to execute Click on Search to clean up the device list and search all devices within the same subnet again The IP addresses shown in the IP Address field reflect those on the local network They may be from the DHCP server If there is no DHCP server the camera will try to find a free IP address this takes from 15 second to 3 minutes depending on the LAN status The method of finding IP address is seeking from 192 168 0 2 to 192 168 0 254 If any of the address inside this range is free the Network Camera will be assigned to this IP address and its subnet mask would be 255 255 255 0 Install IP CamSecure Click Install Software LevelOne Network Camera LevelOne Network Camera Install Software Explore the CD Click IP CamSecure and follow the onscreen instruction or refer to the user s manual to complete installation LevelOne Network Camera m LevelOne Network Camera In Setup Type Select the setup type
29. From PC File Click it and press Load to select configuration location from PC Note Configuration file format is conf z IP CamLocator HER Netwonk Cc ZW Gelaliile Iratira LEVELOINE Camera User About Load configuration File From PC File C From Device Current Setting No selected config Info User DateTime TcPaP PPPoE DDNS Eaei Ri ES Hess i D ppc 5E CFG_T01F001_LM 0 3 03_DDC FC 1081 conf 5 CFG_T01F001_LM 0 3 03_DDC FCS4000 conf Serial Nu S CFG_T01F001_LM 0 3 03_DDC FCS5011 conf Product Firmware Ve Hardware Ve gxeuQ Ta SCRSRUCT Config Files conf Roi P A From Device Click it and press Load to select the specific device in the network Type the Username and Password to load configuration from device Note f you have connected to the specific device before you don t have to type the Username and Password again FIP CamLocator g N otur nant nNnfirnriratinrn Ei LEVEL Nz Camera User About Load configuration File From PC File C From Device Current Setting No selected config Info User Daterime TCP IP PPPoE DDNS Name 1P Address Mod Name Mod I IP Camera 182 168 1 190 FC8 5011 FCS 5 IP Camera 192 168 1142 FCS 4000 FCS 4 Cancel gt Username admin Password m 11 After loading you can get configuration from PC files or devices IP CamLo
30. Image file name The date time suffix consists of lower two digits of year 2 digits month 2 digits date 2 digits hour 2 digits minute 2 digits second 2 digits and consecutive number 2 digits thus 14 digit number is added to the file name Sequence number A consecutive number of 10 digits between 0000000001 and 4294967295 and two fixed digits 00 is added to the Image file name Motion Detection Click it on for using Motion Detection function as a sensor You can set the motion detection function page Note Motion Detection works only when the Video mode is set to MPEGA and the Cropping is set to Off Alarm Buffer Select Use alarm buffer when you forward the image audio of before and after the alarm detection pre alarm post alarm If you do not select it only the image of the moment of the alarm detection is forwarded Click Alarm buffer to display the Alarm buffer setting menu For details see Setting the Alarm Buffer Alarm buffer setting Menu on page Periodical sending You can set to send an image file by SMTP server periodically by selecting On to send the image file by SMTP server linked with setting period Home EM eee Periodical sending On Off SETTING Image file name j BASIC Suffix None Date Time Sequence number Y Advance Sequence number clear Clear gt clien Miis pan Interval cH 301M Y SMTP MIN 30min MAX 24 hour interval General E
31. Obtain DNS server address automatically Information PpaE Use the following DNS server address DDNS Primary DNS server 0 0 00 UPnP Sencodary DNS server oooo IP Notification b Security a ecce OK Cancel kj Advance a IP address The IP address obtained at the PPPoE connecting with network User ID Enter the user ID for authentication necessary for PPPoE connections Type it up to 64 characters Password Enter the password for authentication necessary for PPPoE connections Type it up to 32 characters Re type password Re type the password to confirm Obtain DNS server address automatically Select this to obtain the address of DNS server automatically Use the following DNS server address Select this when you set the fixed address as the IP address of DNS server Primary DNS server Enter the IP address of the primary DNS server Secondary DNS server Enter the IP address of the secondary DNS server Server name Choose the DDNS Server from the list User ID Enter the user ID for authentication necessary for DDNS connections Type it up to 64 characters Password Enter the password for authentication necessary for DDNS connections Type it up to 32 characters Re type password Re type the password to confirm Host name Enter the host name that is registered to the DDNS server Note When you want to use DDNS function you need to register an account in DDNS server first UPnP The device incl
32. Video buffer J pe Image setup Of bua Image Setup You can use the tool bar to optimize video brightness contrast and saturation Language English 19 168 50 140 2 Client setting CE Image setup Cana 60 eS TN Pan Tilt control Language Egish EREATTNTETE EA Setting Re eee DET SE Client setting Gl image setup 5 Set Preset Go eo mi i a sa llli Click the arrow button of the direction you want the IP camera to move Note This function is only for PTZ Cameras You can also Pan Tilt cameras by left clicking the main screen Move the camera toward the preset direction Set Patroi Go Before you start this function you need to specify Guard tour settings in the Setting Menu under Advance Patrol setting Focus Adjust camera focus _ _ Zoom You can use the tool bar to optimize video brightness contrast and saturation You can also modify the Picture settings in the Setting Menu under Basic Setting Live View onapshot You can capture a still image shot by the camera and save it in your computer Press fe and a snapshot window will appear Click Save to save the picture in your computer Click Close to return to the view page Digital Zoom in out the image via the monitor window oer ee L5 NN Ed Tl Fl Click amp to display the digital zoom in window Pull the Qus Cl Ld t CES to adjust th
33. ail address up to 64 characters You can specify up to three recipient E mail addresses Administrator e mail address Type the Administrator e Mail address up to 64 characters This address is used for reply mail and sending system messages from the SMTP server Subject Type the subject title of the e Mail up to 64 characters With respect to mail which is sent according to the IP notification Message Type the text of the E mail up to 384 characters Default value provides network information including IP Port MAC Model Firmware Version and Web Version Security Account The device default account and password setting is root MAC address of IP camera in capital letters That means everyone might access the device including the configuration as long as the IP address is known It is necessary to assign a password if the device is intended to be accessed by others Use this menu to set the user names and passwords of Administrator and up to 9 different users User 1 to User 9 and the access right of each user INNEN TUUM IT TL T T A A T E T T etc mmm n ie e Cancel User name Set a user name between 5 and 16 characters Password Set a password between 5 and 16 characters Re type password Re type the password to confirm Viewer Mode Set a user to Admin Operator or Viewer mode Viewer authentication Allows any viewer direct access
34. ation is necessary an e mail is sent select one of the authentication methods from the followings SMTP Select if SMTP authentication is necessary when an e mail is sent POP before SMTP Select if POP before SMTP authentication is necessary when an e mail is sent Note e When you set to On be sure to select either or both SMTP or and POP before SMTP POP server name It is necessary when the POP before SMTP is selected in Authentication Type the POP receiving mail server name up to 64 characters or type the IP address of the POP server This setting is necessary when the SMTP server which sends e mails performs authentication using the POP user account User name Password Type the user name and Password of the user who has the mail account This setting is necessary when the SMTP server which sends e mails performs authentication Recipient e mail address Type the recipient e Mail address up to 64 characters You can specify up to three recipient E mail addresses Administrator e mail address Type the Administrator e Mail address up to 64 characters This address is used for reply mail and sending system messages from the SMTP server Attached File Type Select to attach the file as JPEG or MPEGA Subject Type the subject title of the e Mail up to 64 characters With respect to mail which is sent according to the alarm detection when Alarm sending of the alarm tab is set to On the characters standing for the sensor type added
35. ber Specify the transmission port number of the video data It is initially set to 8070 Specify an even number from 1024 to 65534 Note Unicast streaming Specify the transmission port number of the video data and audio data used when UDP Unicast is selected with the TCP UDP transmission switching icon in the main viewer Image Size Specify the image size the network camera transmits You can choose among 704 x 480 352 x 240 and 176 x 120 for NTSC mode and 704 x 576 352 x 288 and 176 x 144 for PAL mode Frame rate Set the frame rate of the MJPEG image Selectable values are 5 10 15 fps The unit fps stands for frames sent per second Quality Auto The quality will be automatically decided Fixed quality The selectable values are Medium Standard Good Detailed and Excellent Network Information f HOME MAC address SETTING 9 Obtain an IP address automatically DHCP Y BASIC C Use the following IP address b System bj Camera v Network PPPoE 2 Obtain DNS server address automatically DDNS Use the following DNS server address UPnP Primary DNS server 0 0 0 0 IF Notification Sencodary DNS server 0 0 0 0 b Security HTTP port number 80 O 1024 to 65535 o e Advance MAC address Display the MAC address of the device Obtain an IP address automatically DHCP If a DHCP server is installed on the network to select this while the IP address is assigned by the DHCP server Note
36. capturing and sending images to an HTTP server By using HTTP client function you can send the image and audio file which has been shot and recorded linked with the external sensor input or with the built in motion detection function to HTTP server HTTP client setting menu is composed of two tabs General and Alarm sending General HTTP event Set up the HTTP server URL port user id password and proxy server settings Alarm sending Set to send the mail with connection to the alarm detection by the external sensor input or by the built in motion detection function y HOME e Alarm sending On c Off SETTING Alarm v Motion detection Motion detection Fr BASIC Parameter T an Y Advance Message bj FTP client ps Use alarm buffer Alarm buffer SMTP Y HTTP event Parameter General Message Alarm send Jg Effective Period Always b Schedule P e Se Schedule Schedule bj Alarm buffer a md OK Cancel j Motion detection zm Ed bj System Log Alarm sending Select On to set to send mail with connection to the alarm detection Motion Detection Click it on for using Motion Detection function as a sensor You can set the motion detection function page Note Motion Detection works only when the Video mode is set to MPEGA and the Cropping is set to Off Alarm Buffer Select Use alarm buffer when you forward the image audio of before and after the alarm detection pre alarm post alarm If
37. cator displays the sub folders including Info User Date Time TCP IP PPPoE and DDNS Info The Info page provides you with product factory information including Product Name Firmware Version and Web version IP CamLocator r LEVELOINE O Camera User O About Load configuration File C From PC File From Device Current Setting 192 168 50 140 Info User DateTime TCPAP PPPoE DDNS Product Name FCS 1101 PoE IP Camera Firmware Version LM 1 6 16 0081 Web version LM 1 6 16 0084 rA Apply cy Save User The Network Camera default account and password setting is root MAC address of IP camera in capital letters IP CamLocator provides to assign a password if the Network Camera is intended to be accessed by others Use this menu to set the username and password of Administrator and up to 9 different users User 1 to User 9 and the authentication access right of each group IP CamLocator X f elandtelBisgziilela LIVE O Camera User o About Load configuration File C From PC File From Device Current Setting 192 168 50 140 Info User Date Time TCP IP PPPoE DDNS User name Password Confirm Mode Administrator root User 1 Admin User 3 ad User 4 Admin User 5 Admin User B admin User 7 admin User 8 admin User 8 admin Viewer authentication On a Apply E Save Username Set a user name between 5 and 16 characters
38. ce distribution a complete machine readable copy of the corresponding source code to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange or c Accompany it with the information you received as to the offer to distribute corresponding source code This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer in accord with Subsection b above The source code for a work means the preferred form of the work for making modifications to it For an executable work complete source code means all the source code for all modules it contains plus any associated interface definition files plus the scripts used to control 87 compilation and installation of the executable However as a special exception the source code distributed need not include anything that is normally distributed in either source or binary form with the major components compiler kernel and so on of the operating system on which the executable runs unless that component itself accompanies the executable If distribution of executable or object code is made by offering access to copy from a designated place then offering equivalent access to copy the source code from the same place counts as distribution of the source code even though third parties are not compelled to copy the source along with the object code
39. click on the device listto select a device and click on function buttons to execute Click on Search to clean up the device list and search all devices within the same subnet again Search Click it to search Network Cameras in the network it displays Network Cameras information including Name IP Address MAC Mod Name and Mod ID Note If the camera is not located in local network it will appear in red text Some information is not available when the IP camera is not in local network The IP addresses shown in the IP Address field reflect those on the local network They may be from the DHCP server If there is no DHCP server the video server will try to find a free IP address this takes from 15 second to 3 minutes depending on the LAN status The method of finding IP address is seeking from 192 168 0 2 to 192 168 0 254 If any of the address inside this range is free the Network Video server will be assigned to this IP address and its subnet mask would be 255 255 255 0 Link to IE After searching Network Cameras in network you can click to specific Network Cameras in search area and press Link to IE to use IP cameras with Microsoft web browses Setup Si Setup have to key in the username and password of the administrator to enter the setup page Choose a network camera click on Setup to change the configurations You The following screen will display Note For IP cameras not in local network area which appears
40. ct On The basic setting options are displayed below When you do not use the Alarm output function select Off Recording capacity Pre alarm period Display the maximum recording capacity of image audio before the alarm detection Post alarm period Display the maximum recording capacity of image audio after the alarm detection Recording time Set the recording time for the Pre alarm image audio and Post alarm image audio Pre alarm period Type it with recording time of the image audio before the alarm detection Post alarm period Type it with recording time of the image audio after the alarm detection Note The value of Recording capacity differs depending on Image size Bitrate for MPEG4 and Image quality for MPEG4 and MJPEG in the camera setting menu Motion Detection When you click Motion Detection on the Advance mode menu the Motion Detection setting menu appears There are three Motion Detection functions as sensors to set for different detecting zones Each one has Threshold and Sensitivity inputs which you can adjust to specific zone sequentially Motion Detection function can support to FTP SMTP and Alarm output for capturing and sending images or starting alarm output Motion Detection 1 Threshold Sensitivity H Motion Detection 2 Threshold Sensitivity Motion Detection 3 Threshold FIM AT L4 Q EI nt LI o Vitter PU tie gt 2 Ws i VA Click it O
41. ction f HOME i AUS zi Alarm sending amp On Off Remote path SETTING P kj BASIC Image file name Y Advance suffix Date Time Sequence number E rre EM ETE een Sequence number clear Clear General T F Alarm Motion detection Motion detection gt SMTP P HTTP event Effective Period Always j Schedule Schedule Schedule bj Alarm buffer EM CI CDS OK Cancel F Motion detection t hj System Log Remote path Type the path to the destination in FTP server up to 64 characters Image file name Type the file name you want to assign to the images when sending to the FTP server You can use up to 10 alphanumeric characters hyphen and _ underscore for naming Suffix Select a suffix to add to the file name Date amp time The date amp time suffix is added to the Image file name The date time suffix consists of lower two digits of year 2 digits month 2 digits date 2 digits hour 2 digits minute 2 digits second 2 digits and consecutive number 2 digits thus 14 digit number is added to the file name Sequence number A consecutive number of 10 digits between 0000000001 and 4294967295 and two fixed digits 00 is added to the Image file name Motion Detection Click it on for using Motion Detection function as a sensor You can set the motion detection function page Note Motion Detection works only when the Video mode
42. e e When you want to use DDNS function you need to register an account in DDNS server first About This page displays IP CamLocator information including Version Copyright and Product Date information Note e This computer procedure is protected of the right law and international convention Making all or part which spread a procedure again without permission may cause serious civil and criminal sanction and mention most severe telling in accordance with the law IP CamLocator A LEVELEINE O Camera 2 User About Version 1 1 16 Copyright 2008 Jan 28 2008 18 32 02 How to Access to the Network Camera This chapter introduces how to monitor the image from the camera using Microsoft web browser The LevelOne video server and Network camera can be used with Microsoft web browsers and IP CamLocator in Windows operation systems This section focuses on introducing camera web server The recommended browser for Windows is Internet Explorer 6 0 or above The functions of the camera should be set by the Administrator Initial accessing the network camera Start your web browser and enter the IP address or host name of the network camera of LevelOne in the Location Address field of your browser Use the default account root and default password which is the MAC address in capital letters After successful login there would a screen appear for ActiveX Click Install and proceed Then the monitor image will be di
43. e digital zoom range and it will be showed on the above window You can use the left click of your mouse to move the to any where on the window Audio buttons Speakers turned on Speakers turned off ea Microphone turned on 3 Microphone turned off e Volume control bar Note Audio function is only available in Network cameras which support 2 way audio It means the speakers of your computer are turned on to transmit the sounds from the connected IP camera s Similarly means you can broadcast to the connected IP camera s via the Ethernet using your microphone Video play buttons QU Pause the current video e Play the video a Stop the current video Record the current video Basic Setting Click the Basic folder to display the sub folders including System Camera Network and Account system Information The Information page provides you with product factory information including Product name Firmware version and Web version FC amp 1101 PoE IP Camera Lh RT B OOB1 Thuan t7 12 06 09 CST 2008 Lh 1 5 186 D0B1 Day amp Time f HOME Current date time PC clock SETTING Y BASIC Date time format mm dd hh imm ss Adjust Keen setti vj System j Keep current setting EON CA CO Synchronize with PC Information A O Manual setting 2008 wed 2 wie 13 4 Initialize b Camera cU E Tr V c Synchronize with NTP NTP server name P Network
44. erent write to the author to ask for permission For software which is copyrighted by the Free Software Foundation write to the Free Software Foundation we sometimes make exceptions for this Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally 89 NO WARRANTY 11 BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE THERE IS NO WARRANTY FOR THE PROGRAM TO THE EXTENT PERMITTED BY APPLICABLE LAW EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU SHOULD THE PROGRAM PROVE DEFECTIVE YOU ASSUME THE COST OF ALL NECESSARY SERVICING REPAIR OR CORRECTION 12 IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER OR ANY OTHER PARTY WHO MAY MODIFY AND OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE BE LIABLE TO YOU FOR DAMAGES INCLUDING ANY GENERAL SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF
45. ests ways to best utilize the Network Camera and ensure proper operations For paragraphs preceded by S the reader should use caution to understand completely the warnings Ignoring the warnings may result in serious hazards or injuries ATTENTION All operation please refer to the instruction Please don t place the product on unstable desk or bracket Please avoid any liquid permeate inside of the machine in case damage the product Before wiring please follow all electronic safety standards and using the original attached power supply adapter The RS 485 and Video signal of the product use TVS grade lightning protection technology can prevent effectively lightning strike under 500W The cable transmission of RS 485 and Video signal should keep a certain distance with high voltage equipments or cables Do not let the camera aim at sun or other lighting objects no matter the camera is operating or not otherwise it might damage the CCD camera permanently When the product is out of order please do not try to fix it by yourself please refer to the trouble shooting section of this instruction to figure out the problems in advance If the problem is not found please contact us or our authorized dealers directly All the features and functions are subject to change without notice Please visit www level1 com for the latest ones Table of Contents Before You Use This Prod UC us avete oe Stab br barn US exe E De here UE ATEEN 2
46. external sensor which is connected to sensor input1 of the camera I O port Select position for moving toward preset position when sensor input 1 be triggered Sensor input 2 Click it on for using external sensor which is connected to sensor input2 of the camera I O port Select position for moving toward preset position when sensor input 2 be triggered Sensor input 3 Click it on for using external sensor which is connected to sensor input3 of the camera I O port Select position for moving toward preset position when sensor input 3 be triggered Sensor input 4 Click it on for using external sensor which is connected to sensor input4 of the camera I O port Select position for moving toward preset position when sensor input 4 be triggered 78 Alarm Buffer You can set the Pre alarm image and audio the image and audio before the alarm detection and the Post alarm image and audio These can be set when Alarm sending FTP client setting menu or Image memory setting menu is set to On and besides when Use alarm buffer is selected Home Alarm buffer On Off Video mode SETTING Recording capacity ki BASIC 2 BASIC Pre alarm period Sec Y Advance Post alarm period Sec FTP client Recording time bj SMTP Fre alarm period 5 Sec gt HTTP event Post alarm period 5 Sec Schedule OK Cancel Y Alarm butter Motion detection bh System Log Setting Alarm buffer To activate the Alarm buffer function sele
47. flashing connection otart up with factory default setting by pressing Firmware is hang up the reset button over 5 seconds then releasing it The camera ID address is Recheck the sip switch Incorrect Having image but can t rol Protocol is incorrect Recheck the dip switch control Restart the IP Speed The indicator isn t flashing Firmware is hang up dome by pressing and releasing the reset button Poor video cable Reinsert Unstable images connection The focus is on manual Change into auto mode Vague images operation The smoked cover is dirty Clean up the cover Restoring the factory defaults will erase any previous settings Reset or restore the system after power on 83 Technical Parameters FCS 4000 4300 FCS 4100 4400 FCS 4200 4500 Compression MJEG MPEG4 Mode Max 704x480 pixels NTSC Resolution 704x576 pixels PAL 160x120 30 25fps Frame Rate 320x240 30 25fps 704x480 30 25fps 1 4 Exview HAD CCD 4 0 72mm F1 4 3 0 3 5 91mm F1 6 3 8 3 4 122 4mm F1 6 4 5 0 7Lux F 1 4 1 0Lux F 1 6 0 1Lux F 1 6 Shutter sec Audio Codec 1 1 1 10 000 G 711 PCM 64 kbit s ADPCM 32 kbit s MP3 MPEG4 AAC full duplex 360 continuous 4 in 1out 8MB 32MB Optical 18x Optical 26x Optical 36x Digital 12x Digital 12x DC 12V gt 5 0 C 50 C Power Supply Temperatures Humidity lt 95 non condensing 84 GNU GENERAL PUBLIC LICENSE Version 2
48. for a fee 2 You may modify your copy or copies of the Program or any portion of it thus forming a work based on the Program and copy and distribute such modifications or work under the terms of Section 1 above provided that you also meet all of these conditions a You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change b You must cause any work that you distribute or publish that in whole or in part contains or is derived from the Program or any part thereof to be licensed as a whole at no charge to all third parties under the terms of this License 86 C If the modified program normally reads commands interactively when run you must cause it when started running for such interactive use in the most ordinary way to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty or else saying that you provide a warranty and that users may redistribute the program under these conditions and telling the user how to view a copy of this License Exception if the Program itself is interactive but does not normally print such an announcement your work based on the Program is not required to print an announcement These requirements apply to the modified work as a whole If identifiable sections of that work are not derived from the Program and can be reasonably considered independent and separate works in t
49. gt Alarm buffer OK J Cancel jJ kj Motion detection b System Log Setting Schedule selection Select the list box to specify the schedule you want to set e Mail SMTP Alarm e Mail SMTP Periodical FTP Alarm FTP Periodical HTTP event Alarm Alarm output Alarm or Alarm output Timer can be selected Mon Monday to Sun Sunday The time period on the right of the checked day is the effective period of the schedule Start time End time opecify the Start time and the End time Use the same time schedule every day When this is checked the Start time and End time set to Mon Monday are applied to all days In this case the Start time and End time of the other days than Mon Monday cannot be input Alarm Input When you click Alarm Input on the Advance mode menu the Alarm output setting menu appears You can set in this menu to control the external alarm input of I O port on the rear of the camera linked to FTP and SMTP sending function Note This function is only for Cameras which support digital input output Home Alarm input Sensor input 1 SETTING kj BASIC Camera move y Advance Sensor input 2 kj PTZ control bj Preset position Camera move Ej Patrol Sensor input d ires Camera move SMTP Sensor input 4 bj HTTP event k Schedule Camera move Y Alarm input OK Cancel Pj Alarm buffer KF Motion detection kj System Log Setting Sensor input 1 Click it on for using
50. hemselves then this License and its terms do not apply to those sections when you distribute them as separate works But when you distribute the same sections as part of a whole which is a work based on the Program the distribution of the whole must be on the terms of this License whose permissions for other licensees extend to the entire whole and thus to each and every part regardless of who wrote it Thus it is not the intent of this section to claim rights or contest your rights to work written entirely by you rather the intent is to exercise the right to control the distribution of derivative or collective works based on the Program In addition mere aggregation of another work not based on the Program with the Program or with a work based on the Program on a volume of a storage or distribution medium does not bring the other work under the scope of this License 3 You may copy and distribute the Program or a work based on it under Section 2 in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following a Accompany it with the complete corresponding machine readable source code which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange or b Accompany it with a written offer valid for at least three years to give any third party for a charge no more than your cost of physically performing sour
51. hen network notify type is set to On you can send an e mail notification of the completion of the network setting Product Name lt product gt Web Version lt vweb gt APP Version vfirm http cip xport Notify type Select type of DHCP Static IP and PPPoE will notify SMTP server name Type the SMTP server name up to 64 characters or the IP address of the SMTP server Authentication Select the authentication required when you send an email Off Select if no authentication is necessary when an email is sent On When authentication is necessary an e mail is sent select one of the authentication methods from the followings SMTP Select if SMTP authentication is necessary when an e mail is sent POP before SMTP Select if POP before SMTP authentication is necessary when an e mail is sent Note When you set to On be sure to select either or both SMTP or and POP before SMTP POP server name It is necessary when the POP before SMTP is selected in Authentication Type the POP receiving mail server name up to 64 characters or type the IP address of the POP server This setting is necessary when the SMTP server which sends e mails performs authentication using the POP user account User name Password Type the user name and Password of the user who has the mail account This setting is necessary when the SMTP server which sends e mails performs authentication Recipient e mail address Type the recipient e M
52. ile name Type the file name of the image sent to FTP server up to 10 alphanumeric characters hyphen and _ under score Suffix Select a suffix to be added to the file name sent to FTP server None The name of the sent file will be the Image file name Date amp time The date amp time suffix is added to the Image file name The date amp time suffix consists of lower two digits of year 2 digits month 2 digits date 2 digits hour 2 digits minute 2 digits and second 2 digits and consecutive number 2 digits thus 14 digit number is added to the file name Sequence number A consecutive number is added to the Image file name Sequence number clear Click Clear and the suffix of the sequence number returns to 1 Interval Set the periodical sending is effective interval Min value is 1 min and Max value is 24 hour Effective period Set the period when the periodical sending is effective Always The periodical sending is always effective Schedule You can specify the period when the periodical sending is effective in the schedule setting in the other section Click Schedule and the setting menu for the effective period is displayed Setting the Schedule Schedule setting Menu on page 34 SMTP Set the SMTP menu when you want to send an image via e mail By using Mail SMTP function you can send a mail with attached image which has been shot linked with the external sensor input or with the built i
53. is set to MPEG4 and the Cropping is set to Off Alarm Buffer Select Use alarm buffer when you forward the image audio of before and after the alarm detection pre alarm post alarm If you do not select it only the image of the moment of the alarm detection is forwarded Click Alarm buffer to display the Alarm buffer setting menu For details see Setting the Alarm Buffer Alarm buffer setting Menu on page Effective period Set the period when the periodical sending is effective Always The periodical sending is always effective Schedule You can specify the period when the periodical sending is effective in the schedule setting in the other section Click Schedule and the setting menu for the effective period is displayed Periodical sending You can set to send an image file to FTP server periodically by selecting On to send the image file to FTP server linked with setting period y HOME xm MU ee Periodical sending On gt Off SETTING Remote path bj BASIC Image file name Y Advance Suffix None Date Time Sequence number T gt i _ ae ETE Gite Sequence number clear Clear General Interval oH 30M Alarm sending eriodical send MIN 1min MAX 24 hour interval SMTP Effective Period Always Y gt HTTP event Schedule Schedule Pr Schedule OK Cancel b Alarm buffer bj Motion detection kj System Log Remote path Type the remote path up to 64 characters Image f
54. l Effective Period Always Alarm sending ES EGIT ese Schedule Schedule HTTP event OK Cancel Schedule Alarm buffer Motion detection System Log Ceecee Image file name Type the file name of the image sent by SMTP up to 10 alphanumeric characters hyphen and under score Suffix Select a suffix to be added to the file name sent by SMTP None The name of the sent file will be the Image file name Date amp time The date amp time suffix is added to the Image file name The date amp time suffix consists of lower two digits of year 2 digits month 2 digits date 2 digits hour 2 digits minute 2 digits and second 2 digits and consecutive number 2 digits thus 14 digit number is added to the file name Sequence number A consecutive number is added to the Image file name Sequence number clear Click Clear and the suffix of the sequence number returns to 1 Interval Set the periodical sending is effective interval Min value is 30 min and Max value is 24 hour Effective period Set the period when the periodical sending is effective Always The periodical sending is always effective Schedule You can specify the period when the periodical sending is effective in the schedule setting in the other section Click Schedule and the setting menu for the effective period is displayed Setting the Schedule Schedule setting Menu on page 34 HTTP Event Use this menu to set up for
55. n motion detection function The image file can also be sent periodically E Mail SMTP setting menu is composed of three tabs General Alarm sending and Periodical sending General Select On when you use the SMTP function The common setting options are displayed below If you do not wish to use the e Mail SMTP function select Off and click OK y Home TE SENU e Mail SMTP On Off Suede SMTP server name gt BASIC Authentication On Off Yj Advance SMTP POP before SMTP kj FTP client POP server name M SMTP User name enera Password Alarm sending RT a Recipient e Mail address Periodical sendin HTTP event b Schedule kj Alarm buffer Administrator e Mail address P Motion detection Subject bj System Log Message OK Cancel J Test Note e During transmission of an image file via mail the frame rate and operation performance of the monitor image of the main viewer decline While the camera video mode is set to MPEGA the image of the composite video signal output from the video output connector of the camera may be distorted during mail transmission e You cannot send an audio file by using the mail sending function SMTP server name Type the SMTP server name up to 64 characters or the IP address of the SMTP server Authentication Select the authentication required when you send an email Off Select if no authentication is necessary when an email is sent On When authentic
56. n when you use the Motion Detection function and detecting zone appears for adjusting and moving The common setting options are displayed below If you do not wish to use the Motion Detection function click it Off and press OK Motion Detection 1 Click it on for using Motion Detection 1 function as a sensor You can adjust and move the detecting zone by using mouse Motion Detection 2 Click it on for using Motion Detection 2 function as a sensor You can adjust and move the detecting zone by using mouse Motion Detection 3 Click it on for using Motion Detection 3 function as a sensor You can adjust and move the detecting zone by using mouse Threshold You can use the tool bar to set up limit value When detecting zone signals are over setting value it would carry on assigned work Sensitivity You can use the tool bar to set down limit value When detecting zone signals are over setting value it would carry on assigned work Carry out the following steps Click On to Motion Detection 1 choose one of eight orders A detecting zone 1 appears and use mouse to adjust and move the zone boundaries and position Use tool bar to set Threshold and Sensitivity value Follow the steps to set the other Motion Detection Click the OK to save the setting Note Be careful Motion Detection function don t work with Patrol function at same time System Log The System Log function allows users to review any changes and events happe
57. ned The system starts logging automatically after started Remote Log Enables user to send the log data to a specified log server S514 O0 OK J Cancel Jan 1 00 00 10 lt info gt SYS log started 13 10 54 32 lt info MET Starting network 13 10 54 32 infa MET MAC 0 11 6B 73 06 38 13 10 54 32 info MET Network type DHCP 13 10 54 33 infa ALARM Alarm Buffer Event Receive 13 10 54 33 infa WOT watchdog start 13 10 59 45 lt info RTSP TCP from 152 158 50 157 13 11 16 11 lt info RTSP TCP fram 192 168 50 142 13 11 18 50 info RTSP Clase from 182 168 50 142 13 11 18 02 infa RTSP TCP from 192 1858 50 142 13 11 19 40 infa RTSP Clase from 182 168 50 142 13 11 21 12 infa RTSP TCP from 192 168 50 142 13 11 21 28 infa RTSP Close from 192 169 50 142 13 11 21 53 infa RTSP TCP fram 192 158 50 142 13 11 22 10 infa RTSP Close from 1892 158 50 142 13 11 23 26 infa RTSP Close from 192 158 50 157 13 11 23 25 infa Video MPEG4 Close Connection fram 192 168 50 157 13 11 23 32 infa Video MPEG4 New Connection from 192 1568 50 157 13 11 30 53 infa Video MPEG4 New Connection from 192 168 50 142 13 11 31 20 infa Video MPEG4 Close Connection from 192 168 50 142 Mea rete hoe M gE Cg Tg IEE SIE EE gee gt Mg gg ge Trouble shooting sheet Wrong power cable Reverse connection The power adapter Change broken No image Power cable is not in well EN Reconnected The indicator isn t
58. ot limited to patent issues conditions are imposed on you whether by court order agreement or otherwise that contradict the conditions of this License they do not excuse you from the conditions of this License If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations then as a consequence you may not distribute the Program at all For example if a patent license would not permit royalty free redistribution of the Program by all those who receive copies directly or indirectly through you then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program If any portion of this section is held invalid or unenforceable under any particular circumstance the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances 88 It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices Many people have made generous contributions to the wide range of software distributed through that system in reliance on consis tent application of that system it is up to the author donor to decide if he or she is willing to distribute software th
59. reboot after the configurations set to default Reboot W Reboot Choose a network camera click on Reboot to reboot the device You have to key in the user name and password to use the reboot function IP CamLocator O Camera a User About UPnP device list FCS 1101 Upgrade X Factory default IPCamManager U Reboot The target will be rebooted Are you sure A Search Link to IE Hint You can click on the device listto select a device and click on function buttons to execute Click on Search to clean up the device list and search all devices within the same subnet again Click on OK to continue The device will automatically reboot User The System page provides you all Network Cameras configurations in the network with product or downloaded configuration file information including Info User Date Time TCP IP PPPoE and DDNS IP CamLocator le vt NL edu Grelaiileltlaciilels IREF GIN F O Camera User o About Load configuration File C From PC File From Device Current Setting 192 168 50 140 Info User DateTime TCP IP PPPoE DDNS Product Name FCS 1101 PoE IP Camera Firmware Version LM 1 6 16 0081 Web version LM 1 6 15 00B1 sj Apply cy Save Load configuration File Select From PC File or From Device the former can load information of downloaded configuration file and the latter can load Network Camera configurations in the network
60. reenwich Mean Time in the area where the device is installed from the pulldown box Initialize Reboot Factory default cave oo f Browse Reboot Click this button to reboot the device A confirmation dialogue will appear Click OK to proceed It takes about two minutes to reboot the device Factory default Click this button to reset the device to the factory default settings A confirmation dialogue will appear Click OK to proceed the network indicator on the device will start to blink After completing adjustments to the default settings the device will reboot automatically Do not turn off the device until the device reboots Backup setting data Save the setting data of the device to a file Click Save and follow the instructions on the browser to save the setting data file to your specified location Restore setting Load the saved setting data of the device Click Browse and select the file in which the setting data is stored Click OK and the device is adjusted according to the loaded data and restarted Firmware update Upgrade the device software Click Browse and select the file for upgrading A confirmation dialogue will appear Click OK to start upgrading The device will reboot upon completion Note Use only upgrade files that are special for this device Problems may occur otherwise Do not turn off the device power or disconnect the network until the upgrading is completed Camera General
61. rough any other system and a licensee cannot impose that choice This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License 8 If the distribution and or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries so that distribution is permitted only in or among countries not thus excluded In such case this License incorporates the limitation as if written in the body of this License 9 The Free Software Foundation may publish revised and or new versions of the General Public License from time to time Such new versions will be similar in spirit to the present version but may differ in detail to address new problems or concerns Each version is given a distinguishing version number If the Program specifies a version number of this License which applies to it and any later version you have the option of following the terms and condi tions either of that version or of any later version published by the Free Software Foundation If the Program does not specify a version number of this License you may choose any version ever published by the Free Software Foundation 10 If you wish to incorporate parts of the Program into other free programs whose distribution conditions are diff
62. splayed in your browser Connect to 197 168 10 103 EEEE TELTET Remember my passord Interne Explorer SIS 09 D D S Tara nd Dar you want bo imsi all thes sobere Mane PoOwgdecwisw oa Publisher i x Morir opone Wille files from the Internet can be useful thes Fin epe can potentially harm your Computer Canby intl paiva rim pubes you trust bas y thes risk Configuration of Main Console Language Engish EEPATLCAUEIT suo EEEE Tanne Client setting TM Image setup 7 E PTZ control Language You can click the pulldown box to select system language including English Traditional Chinese German Danish Greek and Korean Setting Setting This function is only for the Administrator Click this button to get into the Basic and Advance settings menu Client Setting Mode Click the pulldown box to choose between MPEG4 and MJPEG video compression mode Note MJPEG streaming is unavailable if RTSP mode is ON View Size Select the desired display image resolution to 640X480 or 320X240 Protocol Select the transferring protocol from TCP UDP HTTP and Multicast Video Buffer Turn the Video Buffer function On Off The Video Buffer function makes the streaming more smoothly in unsteady network environment but might cause a little delay in live viewing Language English 192 168 50 140 M Setting a Client setting Mode MPEG4 v View size 320x240 v
63. stallation CAS 4000A wall mount Kit Fixing power box on the wall Hook up the safety buckle and screw the two screws to fix the power box CAS 4000B ceiling mount kit Fixed the iron tube to the cover of power box CAS 4000C corner mount kit Combine two brackets and use the spanner to fix the screw The assembly completed CAS 4000D pole mount kit Fixed the bracket on the rear of power box Software Installation In this manual User refers to whoever has access to the Network Camera and Administrator refers to the person who can configure the Network Camera and grant user access to the camera At the end of the hardware installation the Administrator must place the product software CD into the CD ROM drive of the PC running in MS Windows An auto run program will pop up If the program is not on auto run go to the root directory of the software CD and click on autorun exe Install IP CamLocator Click on Install Software item after the window contains changed click on IP CamLocator to run installation program LevelOne Network Camera VA i i m LevelOne Network Camera LevelOne Network Camera Upon IP CamLocator s start up this program searches for LevelOne s products on the same LAN After searching LevelOne Video Servers or Network cameras will be located by the IP CamLocator There may be several entries shown in the window The
64. t position of camera viewing users can recall those preset positions instantly via surveillance software The intelligent IP speed dome supports 32 preset positions The intelligent speed dome supports 4 navigation groups each group is capable to having 8 present positions Lens control Focusing control Users can press the zoom button to adjust the image viewing distance Iris control The factory default is auto iris ensuring to have the best image quality In particular circumstances the operator can also use manual iris feature Hardware Installation Installation Notice Please be sure to follow all the steps of the instructions Wrong installation may damage the product FCS 4300 4400 4500Housing installation Outer housing fixing as below click down the iron slice then pull it up Before install inner housing please hook the safety lock of outer housing on the fixing socket of inner housing in case of installation accidents Please fix the three screws on the side before install the camera Finally cover up the smoked cover to accomplish the installation Please be sure hands are clean while cover up or it may dirty the cover It s recommended to tear off the protect membrane after installation is finished or wear on gloves FCS 4000 4100 4200Housing installation The installed spot must be held to the product firmly in case the image shaken while the camera operates Pu
65. t the cable tube into the power box and screw it e unscrew the bottom screw to install cables LAN Cable Reset Button gt _ e Insert the plug and pull these cables through out from the bottom of bracket Hook up the safety buckle and screw the two screws to fix the power box Camera installation Before installation please set for the communication protocol baud rate and camera ID address first PROTOCOL IDADDRESS ALARM SWITCH e ID address setup There are 8 dip switchers on the PCB board Please set it up as below All the dip switchers are OFF Remarks Please reboot the camera after the camera setup is done Protocol setup The dip switchers are for protocol setup Please set it up as below No 5 is ON ON ECE 2 3 4 5 6 I 8 Remarks Please reboot the camera after the protocol setup is done Alarm Dip switchers The dip switchers are for DI DO setup Please set it up as below NO 5 6 7 8 is ON You can also follow the triangle in front of camera and aim at the bottom screw to fixing e After the camera is installed please turn the camera and fixing the two side screws e Finally cover up the smoked cover to accomplish the installation Please be sure hands are clean while cover up or it may dirty the cover It s recommended to tear off the protect membrane after installation is finished or wear on gloves Bracket in
66. udes support for UPnP which is enabled by default If also enabled on your computer the device will automatically be detected and a new icon will be added to My Network Places It provides port forwarding for opening a port in a router or firewall in a private network in order to let a party from the outside world contact a user inside HOME UPnP On Off SETTING Turn On UPnP port forwarding Y BASIC HTTP port 80 1024 65535 b System SSL Port 2443 O 1024 65535 kr Am Noct MPEG4 viewer port 8090 1024 65535 Y Network UE MPEG4 viewer port SSL 3091 1024 65535 Information PPPoE MJPEG viewer port 8070 1024 65535 DONS MJPEG viewer port SSL 8071 1024 65535 USE MPEG4 RTSP port IP Notification e Ej security Computer view 6050 1024 65535 gt Advance Mobile view 8030 1024 65535 OK J Cancel HTTP port Enter the HTTP port number and default HTTP port is 80 SSL port Enter the SSL port number and default SSL port is 443 MPEG4 viewer port Enter the MPEGA viewer port number and default MPEG4 viewer port is 8090 MPEG4 viewer port SSL Enter the MPEG4 SSL viewer port and default is 8091 MJPEG viewer port Enter the MJPEG viewer port number and default MJPEG viewer port is 8070 MJPEG viewer port SSL Enter the MPEG4 SSL viewer port and default is 8071 MPEG4 RTSP port Enter the MPEG4 RTSP port default value is 8050 for computer view 8030 for mobile view IP Notification W
67. with PC X Cancel C Manual setting 2008 15 1 00 00 00 c Synchronize with NTP NTP server name D al ntp ort jw Auto Interval 01 em hours Time zone GMT 08 00 Taipei Hint There are three ways to adjust system date and time The easiest way is to make Network Camera Synchronize with PC The second way Manual setting is to setthe date and time manually by entering new values The third way Synchronize with NTP is to make Network Camera automatically synchronize with timeservers over the Internet Press Next to continue Previous to go back Cancel to go to the main page Network settings You can change the network settings of the network camera here See Hint for details IP CamLocator LEVELEINE Network settings 192 168 50 140 em Previous Http Port Port 80 C others 5 1024 65535 MAC Address 00 11 68 73 06 39 gt Next IP Address DNS Setting Obtain IP automatically DHCP Obtain DNS server automatically a C Use the following IP C Use the following DNS server IP Address 192 166 50 140 Primary DNS Subnet mask 255 255 255 J Secondary DNS Default Gateway Hint You can change the device HTTP port IP address subnet mask default getway primary DNS and secondary DNS If you use PPPoE skip IP address and DNS settings Then click on Next to setup PPPoE Press Next to continue Previous to go back Cancel to go to the main page
68. y DNS m Apply cy Save IP Address The IP address obtained at the PPPoE connecting with network User ID Enter the user ID for authentication necessary for PPPoE connections Type it up to 64 characters Password Enter the password for authentication necessary for PPPoE connections Type it up to 32 characters Confirm Re type the password to confirm Obtain DNS server automatically Select this to obtain the address of DNS server automatically Use the following DNS server Select this when you set the fixed address as the IP address of DNS server Primary DNS Enter the IP address of the primary DNS server Secondary DNS Enter the IP address of the secondary DNS server IP CamLocator gt Networnk Gamera Configuration Z v GC z LEVELONE one O Camera User o About Load configuration File C From PC File From Device Current Setting 192 168 50 140 Info User Date Time TCP IP PPPoE DDNS DDNS C On Off Server Name n ive ndns org v User ID Password Confirm po Hostname A Apply cy Save Server Name Select the DDNS Server User ID Enter the user ID for authentication necessary for DDNS connections Type it up to 64 characters Password Enter the password for authentication necessary for DDNS connections Type it up to 32 characters Confirm Re type the password to confirm Hostname Enter the host name that is registered to the DDNS server Not
69. y the copyright holder saying it may be distributed under the terms of this General Public License The Program below refers to any such program or work and a work based on the Program means either the Program or any derivative work under copyright law that is to say a work containing the Program or a portion of it either verbatim or with modifications and or translated into another language Hereinafter translation is included without limitation in the term modification Each licensee is addressed as you Activities other than copying distribution and modification are not covered by this License they are outside its scope The act of running the Program is not restricted and the output from the Program is covered only if its contents constitute a work based on the Program independent of having been made by running the Program Whether that is true depends on what the Program does 1 You may copy and distribute verbatim copies of the Program s source code as you receive it in any medium provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty keep intact all the notices that refer to this License and to the absence of any warranty and give any other recipients of the Program a copy of this License along with the Program You may charge a fee for the physical act of transferring a copy and you may at your option offer warranty protection in exchange

Camera - LevelOne

Contents

Download Pdf Manuals

Related Search

Related Contents