Video CopyMaster Model SED-CM2 User Manual
Contents
1. 77 Video Input Level seven ert HUEHTTLUTTET THT e rower e o e Video Copymoster The Sima CopyMaster Model SED CM2 will automatically enhance the quality of the home video you are duplicating This package includes 1 CopyMaster Unit Model SED CM2 1 7 5V 300 mA adapter 1 RCA style Video Cable This Instruction Manual Connection The CopyMaster should be connected between your playback camcorder VCR or DVD and the recording VCR or DVD as shown in Fig 1 Only the video cables are to be connected to the CopyMaster Audio cables should be connected directly between the playback and recording units With Hi 8 or S VHS capability connect your S video cables to the CopyMaster Playback camcorder VCR DVD Fig 1 SED CM2 Operation Select A V input on your recording VCR and press RECORD Then press PLAY on your playback device Note on AV Input Modes All VCR s have at least one AV input mode many have more than one There will be a switch or button on the VCR that will toggle between the Tuner Mode and AV Modes Manufacturers use different names to identify the AV Mode External Mode EXT Auxiliary Mode AUX or Line Input L1 L2 etc Consult A the VCR s user manual to identify the AV Mode Fig 2 Video Output Adjust Mahai PLL for your unit O Power O B amp W The CopyMaster can also give your home videos an old time look by eliminating color and creating black and white video Slide the swit2. 90 day Limited Warranty Sima Products Corporation warrants this product against defects in materials and workmanship for a period of 90 days from the date of purchase During the warranty period the product will be repaired or replaced at Sima s option Mail the enclosed product registration card within ten days of the original purchase Conditions Video CopyMaster Ship your unit freight pre paid including a copy of your sales receipt and a description of problem to Automatic Video Enhancer and Sima Products Corporation i Attn Customer Service D u pl icator 140 Pennsylvania Ave Bldg 5 Oakmont PA 15139 Model SED CM2 This warranty is void if any defects are caused by abuse misuse negligence or unauthorized repairs All liability for incidental or consequential damages is specifically excluded some states do not allow for the exclusion or limitation of incidental or i 7 consequential damages so the above limitation or exclusion may not apply i to you This warranty gives you specific legal rights and you may have other rights which vary from state to state Optional Accessories available from Sima Products e RCA style video cable e RCA style audio and video cable e S video cable as Level Adjust S i mMm Q Sima Products Corporation 140 Pennsylvania Ave Bldg 5 Oakmont PA 15139 800 345 7462 User Manual www simacorp com e mail us at custserv simacorp com 2003 Sima Products Corporation PN216
3. ch located on the rear panel from color SSsSsSsSsSSSSSsSSSSSSSSSSSSSSS to black and white to achieve this effect Note Some color flashing may occur with some video sources Video Output Level You can manually adjust the video output level by turning the Video Output Level Adjust knob on the front panel Increase the brightness of the video output level by turning the knob as needed Leave in center position for normal video Video Input Level Lights These lights indicate the video level of the input signal It is normal for the lights to fluctuate on different scenes or tapes Troubleshooting Hints No picture e Are Video Input lights on If not there is no video input signal e Has correct mode AV Line Tuner etc been set on the VCR or DVD Correct connecting cable Have the RCA cables been mixed up at the input and output of the VCR DVD e Be sure inputs and outputs are of the same type composite to composite or s video to s video e Is the Power light on If not there is no power e Is the connecting cable of the plug in adapter damaged Device does not operate FCC Information This equipment generates and uses radio frequency energy and if not installed and used properly that is in strict acceptance with the manufacturer s instructions may cause interference to radio and television reception It has been type tested and found to comply with the limits for a Class B computing device in accordance w
4. ith the specifications in Subpart J of Part 15 of FCC Rules which are designed to provide reasonable protection against such interference in a residential installation However there is no guarantee that interference will not occur in a particular installation If this equipment does cause interference to radio and television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Re orient the receiving antenna Relocate this equipment with respect to the receiver Move this equipment away from the receiver Plug this equipment into a different outlet so that this equipment and receiver are on different branch circuits If necessary the user should consult the dealer or an experienced radio television technician for additional suggestions The user may find How to Identify and resolve Radio Television Interference Problems prepared by the FCC helpful The booklet is available from the U S Government Printing Office Washington DC 20402 Stock No 004 000 00345 4 Notice Use of this product for unauthorized duplication of copyrighted material from DIVX DVD VHS or other media is prohibited under the federal copyright laws unless the copy qualifies as a fair use under Copyright Laws
Download Pdf Manuals
Related Search