Active Braille
Contents
1. through the text and are referred to as TLD or TRD in the list below In the event of the right as well as the left Triple Action Key Up can be pressed it is called TU If alternatively the Triple Action Key left or right Down can be used this is called TD In the case that you need to press both TU and TD simultaneously such as setting a mark within the Editor you may press the keys at the top left TLU and bottom right TRD or at bottom left TLD and top right TRU The centre position of either the left or right Triple Action Key TLC and TRC can be used for additional functions If you move along the right side of the housing towards the back you will first feel the main power button Located behind the power button is a USB type A port to connect a USB keyboard Behind the USB type A port is the outlet for the power supply On the left side of the device are from the front to the back another USB type A port to connect a USB keyboard a Micro SD card for service reasons and a USB type B port to connect a PC Please do not remove the Micro SD card at any time from the device while it is on Data on the card can be damaged Please turn the Active Braille off before you insert or remove the Micro SD card Left on the back side you find a round headphone plug 2 5 mm to connect a headphone or an external loudspeaker The Active Braille is shipped with an adapter cable to connect also a 3 5 mm connector Yo2. Handy Tech 0O 0O 0o O0 00 00 Elektronik GmbH Short Reference for the Active Braille Version 1 0 Please also review the detailed User Manual which is included in printed not Braille format and in daisy format on the enclosed CD The two space bars are located at the centre front In the following description the left space bar is called SPCL and the right space bar is called SPCR If either the left or right space bar can be used they will be called SPC Above the Braille display you can find 8 ergonomic function keys These function keys are also used for Braille input They correspond to the usual Braille keyboard layout and are from the left to the right as follows 7 3 2 1 4 5 6 8 Located in the middle of the device are 40 ergonomic Braille display elements with integrated cursor routing keys The cursor routing CR keys which are integrated as part of each Braille cell enable you to place the cursor directly at the text position of this Braille cell The Triple Action Keys are to the left and right of and flush with the Braille cells You can activate the Triple Action keys at the top in the centre and at the bottom The Triple Action Key functions are The left or right Triple Action Key s Up position also serves as a reading key to move backward within the text and will be referred to as TLU or TRU in the list below The left or right Triple Action Key s Down position also serves as a reading key to move forward
3. i SPC 2 4 insert mode is default Set mark TU TD Jump to mark Chord m SPC 1 3 4 Incremental forward search Chord f SPC 1 2 4 Incremental backward search Chord F SPC 1 2 4 7 Forward search and replace Chord r SPC 1 23 5 Display character in ASCII Chord D SPC 1 4 5 7 Insert current date Chord d SPC 1 4 5 Insert current time Chord t SPC 2 3 4 5 Handy Tech 0O 0O 0o O0 00 00 Elektronik GmbH Function Keys Save file without closing it Chord s SPC 2 3 4 Open file from Editor Chord o SPC 1 3 5 Open file in read only mode Chord O SPC 1 357 Switch to next file SPC 5 6 8 Switch to previous file SPC 2 37 Save and close file Chord e SPC 1 5 Suspend Editor SPC 1 23456 Editor s Setup menu Chord u SPC 1 3 6 Status display Chord S SPC 2 3 4 7 Switch to PC Mode Chord p SPC 1 2 3 4 Help Chord h SPC 1 2 5 Keys in PC Mode Function Keys Return to menu Hold down SPC 1 3 4 about half a second Switch between Braille display and status module display SPCL SPCR Fixed Key Functions on External Keyboard Function Key Key Combinations Switch external keyboard to PC Chord SPC 2 5 Entire Braille display line to left Page up Entire Braille display line to right Page down Cursor to top of file Cirl Post1 Cursor to end of fi
4. lar as possible In the following table you find the assignments for Window Eyes You can find the tables for JAWS and Hal SuperNova as well as the complete table for Window Eyes in the user manual Control Key Braille Dot Function 7 Go to focus 3 Go to the active window s title bar 2 Toggle Braille tracking on off H Move Braille display section one line up SPCL or TU Braille display section to the left SPCR or TD Braille display section to the right 4 Move Braille display section one line down 5 Toggle between Window Eyes cursor and mouse cursor 6 Go to the active window s status line 8 Drag mouse to focus 7 8 Specifies whether type of control element will be indicated or not 3 8 Toggle Browser Mode on off 2 8 Toggle between 6 8 dot Braille 1 8 Handy Tech configuration dialog 4 8 Toggle blank spaces 5 8 Drag cursor to mouse 2 3 Beginning of line 5 6 End of line 6 8 Toggle Show Attributes on off 1 2 3 Top of file 4 5 6 End of file 5 6 8 Run through attributes TLC Tab TRC Shift Tab SPC 1 2 7 Toggle Braille input on off SPC 1 7 ATC on off SPC 1 2 3 ATC reading protocol on off
5. le Ctrl End Toggle between insert and overstrike Insert Delete current character Delete Delete character left of cursor Backspace Set beginning of block Ctrl Enter Copy block Ctrl c Cut block Ctrl x Delete block without copying Ctrl X or backspace Paste block Ctrl v Exchange mark and cursor Cirl Tab Status display Ctrl S Incremental forward search Ctrl f Incremental backward search Ctrl F Forward search and replace Ctrl r ESC function ESC Navigation Arrow keys Cursor to previous word Cirl cursor left Cursor to next word Ctrl cursor right Cursor to previous sentence Ctrl cursor up Cursor to next sentence Ctrl cursor down Cursor to beginning of line Pos1 Cursor to end of line End Set mark Ctrl M Jump to mark Ctrl m Switch to next file ALT Tab Switch to previous file ALT Shift Tab Suspend Editor Ctrl Space Save file without closing it Ctrl s Handy Tech 0O 0O 0o O0 00 00 Elektronik GmbH Function Key Key Combinations Save and close file Ctrl e Help Ctrl h Editor s Setup menu Ctrl u Switch to PC Mode Cirl p Display character in ASCII Ctrl D Open file from Editor Ctrl o Open file in read only mode Ctrl O Insert current date Ctrl d Insert current time Ctrl t Screen Reader Functions The key assignments for the different screen readers Window Eyes JAWS and Hal SuperNova on the Active Braille are as simi
6. u find a list of important functions an there corresponding key combinations in the following tables Handy Tech 0O 0O 0o O0 00 00 Elektronik GmbH Navigating the Menu System Function Keys OSO Editor Functions Function Keys Abort operations cancel markings TLC Read text TU or TD Start automatic reading SPC TD Change automatic reading speed TU or TD if automatic reading is active Manual scrolling SPC Halt automatic reading CR keys Automatic scrolling via ATC on off Chord A SPC 1 7 Delete character at cursor position SPC 4 5 Backspace Chord b SPC 1 2 Cursor to top of file Home SPC 1 23 Cursor to end of file End SPC 4 56 Cursor to beginning of line SPC 1 3 Cursor to end of line SPC 4 6 Cursor to beginning of next sentence SPC 5 Cursor to beginning of previous sentence SPC 2 Cursor to next word SPC 6 Cursor to previous word SPC 3 Move cursor left SPC 7 Move cursor right SPC 8 Move cursor one line up SPC 1 Move cursor one line down SPC 4 Direct cursor placement Cursor Routing Keys Mark beginning of block SPC TRC or press CR key twice at beginning of block Cut block Chord x SPC 1 3 4 6 Copy block Chord c SPC 1 4 Delete block without copying Chord X SPC 1 3 46 7 or SPC 1 2 Paste block Chord v SPC 1 2 3 6 Exchange mark and cursor SPC 7 8 Toggle insert overstrike mode Chord
Download Pdf Manuals
Related Search