AR280P Clockradio manual
Contents
1. e Press the 8 or 12 key to set the desired month e Press 7 to confirm The day is flashing e Press the 8 or 12 key to set the desired day e Press 7 to confirm Digital time indication is flashing e Press the 8 or 12 key to choose between 24 or 12 hour time display Press 7 to confirm The hours are flashing on the display e Press the 8 or 12 key to set the desired hour e Press 7 to confirm The minutes are flashing on the display e Press the 8 or 12 key to set the desired minutes e Press 7 to confirm 6 2 Using the radio O Switch to radiomode e Todo this press the key 11 The frequency is shown on the display Manually adjust the frequency e To tune to the station of your choice press the 8 button or the 12 button repeatedly until the frequency is found Automatically adjust the frequency e Press and hold the 8 Button or the 12 Button to find the desired frequency Save a radiostation into the memory e Keep key 4 pressed for 2 seconds The digits start flashing e Press the 8 or 12 key to select a memory location e Press 4 to confirm 3 memory locations are available Activating a stored function e Press the button 4 repeatedly until the desired frequency is found Setting the timer e While listening to the radio press the 6 button several times to set the swith off time between 90 and 10 minutes After the set time the radio au2. your reseller e Remove the labels from the front panel carefully if present We recommend that you retain the original carton and packing materials in case it ever becomes necessary to return your product for service This is the only way to safely protect the product against damage in transit If you do dispose of the carton and the packing materials please remember to recycle with due care to the environment 3 2 Package contents The following items are included in the received package 1 x AR280P Clockradio 1x Quick start guide il If any item is missing please contact your reseller 4 Installation A CAUTION Do not put the appliance near a heat source A CAUTION Do not expose the appliance to direct sunlight e Put the appliance on a horizontal flat surface e Connect the appliance to the mains 4 1 Optional Insert the battery To ensure that your alarm radio remains switched on during a power outage you can insert a battery type CR2032 Do this as follows 1 Remove the battery cover 2 Insert the batteries matching the and polarity markings 3 Re install the battery cover e lf you do not use the appliance for an extended period remove the batteries Please note batteries not included A CAUTION Incorrect installation can cause battery leakage and corrosion which will damage the appliance Corrosion oxidation battery leakage and any other gradually acidic defect of this nature wi
3. AR280P Clockradio manual Index o 1 Intended use e 2 Safety 2 1 Labels in this manual O 2 2 General safety instructions e 3 Preparations for use O 3 1 Unpacking O 3 2 Package contents e 4 installation O 4 1 Optional Insert the battery O 4 2 Connecting to the mains e 65 Functions e 6 Operation 6 1 Setting the date and time 6 2 Using the radio 6 3 Using the projection function 6 4 Setting the timer and display 6 5 Setting the alarm O 00OO e 7 Cleaning and maintenance e 8 Technical data e 9 Disposal of used electric and electronic equipment 1 Intended use The AR280P is intended for use as an alarm radio The AR280P has an FM radio function a projection function and includes a lamp The temperature can also be displayed Read the manual carefully before the first use 2 Satety 2 1 Labels in this manual A WARNING A warning means that injury or death is possible if the instructions are not obeyed A CAUTION A caution means that damage to the equipment is possible A note gives additional information e g for a procedure 2 2 General safety instructions A CAUTION Do not spill any liquid on the appliance A WARNING Do not put force on the appliance The appliance can fall and can cause serious injury 3 Preparations for use 3 1 Unpacking e Unpack the appliance carefully e Check the package contents as described below If any item is missing please contact
4. duct For more information and warranty conditions please visit www akal eu X Do not dispose of batteries as household waste but take them to a battery recycling facility
5. e Clean the outside of the appliance with a soft cloth When the appliance is very dirty dampen the cloth slightly with water and a neutral solution 8 Technical data Specifications Power supply AC 220 240V 50 60 Hz Frequency range 87 5 108Mhz 8 LED Display Weight 460 g Dimensions 140x140x96mm Projection function Sleep timer Alarm clock Temperature indication Digital FM Radio Accessories Mains cable User manual 9 Disposal of used electric and electronic equipment The meaning of the symbol on the material its accessory or packaging indicates that this product shall not be treated as household waste Please dispose of this equipment at your applicable collection point for the recycling of electrical and electronic equipments waste In the European Union and Other European countries which there are separate collection systems for used electrical and electronic product By ensuring the correct disposal of this product you will help prevent potentially hazardous to the environment and to human health which could otherwise be caused by unsuitable waste handling of this product The recycling of materials will help conserve natural resources Please do not therefore dispose of your old electrical and electronic equipment with your household waste For more detailed information about recycling of this product please contact your local city office your household waste disposal service or the shop where you purchased the pro
6. ll invalidate the guarantee 4 2 Connecting to the mains Connect the appliance to the mains 5 Functions Setting the brightness higher Setting the brightness lower Switch the lamp on or off M NAP button a Save a radiostation into the memory b Setting the timer c Turn off display a 5 Lamp 6 SNOOZE SLEEP DIMMER button a Adjusting the brightness of the display b To snooze the alarm press SNOOZE SLEEP DIMMER 6 The alarm sounds again after the snooze time has elapsed c Dim the light temporary during an alarm 7 Switch between time and temperature 8 button Switch between time and date b Search frequency 9 Activating the alarm 1 10 Screen 11 Switch to radiomode 12 button a Switching between summer and winter time b Search frequency 13 Activating the alarm 2 14 button a Adjust the volume Screen Switch between time and date 15 Adjust the volume 16 button a Turning the projection 180 degrees Projection function b Switch between time and temperature 17 Turn the projection function on or off 18 Projection dial 19 Loudspeaker 20 Temperature sensor 21 FM antenna 22 Battery cover 6 Operation 6 1 Setting the date and time Radio off Note Turn the radio off before proceding e Keep key 7 pressed for 2 seconds The date is flashing e Press the 8 or 12 key to set the desired year e Press 7 to confirm The month is flashing
7. tomatically switches off 6 3 Using the projection function Turn the projection function on or off e Press the 17 button Caution When the alarm radio is first connected to the power supply the projection function is immediately activated Focusing the projection e Turn the key 18 until the desired sharpness is achieved Turning the projection 180 degrees Press the 16 button Switch between time and temperature Keep key 16 pressed for 2 seconds 6 4 Setting the timer and display Radio off Note Turn the radio off before proceding Setting the timer e Press the 4 button N90 appears on the display This shows after how many minutes the beep is activated e Press the button 4 repeatedly until the desired setting is found Setting the display e Keep key 4 pressed for 3 seconds e The display disappears automatically after 15 seconds When the display timer is set an orange bar appears in the display Disable the display timer e Keep key 4 pressed for 3 seconds 6 5 Setting the alarm Radio off li Note Turn the radio off before proceding li Caution You can set and activate two alarms DLR we aA La e Press the 9 button An orange bar appears in the display above AL1 the alarm is now activated 7 00 appears on the display e Keep key 9 pressed for 2 seconds The hours are flashing on the display e Press the 8 or 12 ke
8. y to set the desired hour e Press 9 to confirm The minutes are flashing on the display e Press the 8 or 12 key to set the desired minutes e Press 9 to confirm 1 5 is flashing on the display Here you can set which days the alarm goes off e Press the 8 or 12 key to set the desired day 1 5 Monday to Friday 1 7 Monday to Sunday 6 7 Saturday and Sunday 1 1 Setting one single day When you choose this option please indicate which day you want to set 1 Monday 2 Tuesday 3 Wednesday 4 Thursday 5 Friday 6 Saturday and 7 Sunday e Press 9 to confirm is flashing on the display e Press the 8 or 12 key to choose whether you wish to hear the sound of an alarm or the radio when the alarm goes off e Press 9 to confirm The volume is flashing e Press the 8 or 12 key to set the desired volume 1 is the minimum volume and 15 is the maximum volume e Press 9 to confirm The brightness flashes The lights can turn as wake up light when the alarm goes off e Press the 8 or 12 key to set the brightness for when the alarm goes off Press 9 to confirm The light switches on 5 minutes before the alarm goes off The light becomes increasingly brighter e Tosnooze the alarm press 6 The alarm sounds again after the snooze time has elapsed The default snooze time is 9 minutes 7 Cleaning and maintenance A WARNING Before performing any cleaning or maintenance switch off and unplug the applianc
Download Pdf Manuals
Related Search