PW 6065 user manual - First Choice Marshalls
Contents
1. PROFESSIONAL Operating and installation instructions for washer extractor PW 6065 To avoid the risk of accidents or damage to the machine it is essential to read these instructions before it is installed and used for the first time M Nr 06 872 220 Caring for the environment Disposing of the packing material The transport and protective packing has been selected from materials which are environmentally friendly for disposal and can normally be recycled Ensure that any plastic wrappings bags etc are disposed of safely and kept out of the reach of babies and young children Danger of suffocation Rather than just throwing these materials away please ensure that they are offered for recycling Disposal of your old machine Electrical and electronic machines often contain materials which if handled or disposed of incorrectly could be potentially hazardous to human health and to the environment They are however essential for the correct functioning of your machine Please do not therefore dispose or it with your household waste Please dispose of it at your local community waste collection recycling centre and ensure that it presents no danger to children while being stored for disposal It should be disconnected from the mains supply by a competent person The cable should be cut off directly behind it to prevent misuse See the Warning and Safety section of this booklet for further det2. m Dyes suitable for use in a washing machine can be used However please note that the salt used in the dyeing process can cause corrosion to stainless steel components in the machine if you dye frequently Always observe the manufacturer s instructions carefully External dispensing system This machine is suitable for connecting to an external dispensing system A conversion kit is required which must be fitted by a Miele approved service technician 29 Cleaning and care Disconnect the machine from the mains electricity supply m Clean the casing and fascia panel with a damp cloth and a mild non abrasive detergent or soap and water Wipe dry with a soft cloth m The drum and any other stainless steel components can be cleaned using a suitable proprietary stainless steel cleaning agent following the manufacturer s instructions on the packaging E Cloth A microfibre E Cloth is available from the Miele UK Spare Parts Department which is suitable for cleaning surfaces such as stainless steel glass plastic and chrome without the use of chemicals 30 Extra cleaning Carry out a hot wash 70 C or above with powder detergent approx every 6 weeks to help prevent deposits building up in the machine These can occur when washing is mainly done at low temperatures and also lead to unpleasant smells N Do not use solvents abrasive cleaners glass cleaners or all purpose cleaning agents These mig
3. s edes pede eae de E SERERE RE RAE E ae ds 41 Optional accessories iiis 41 Installation and connection 000 0002 lesse iile 42 Front VIEW cs eei ee hale ee ENG EIN EG be Pe E S 42 ncm Tr ne ee ee ee De ee 43 Installation on a raised plinth 2 0 0 0 00 000 44 Washer dryer stack isis 44 Payme mt Sy Sle Meer krasse Karel lee 1 Ken ieee Base 44 Installation surface n 45 Installing the washer extractor i i 45 Removing the transit struts 222 2 eee 45 Re fitting the transit struts 0 2 ee 47 Levelling the machine 0 00 00 cee eee 48 Contents WADEN e MR SR ne ss A ee EN 49 Connection to the cold water supply sasaaa aaa 49 Connection to the hot water supply o a auaa a aa 50 Conmectlon to drainage u bicep itage he ER Pe epe deed de 51 Machines with a drain pump lsssss es 51 Dump valve version alu pe eaa a aiT ae aal e 51 ElecthiCal connection JS s se a en en nee 52 Technical data 0 tebg rinie t EEEE EAEE eee 53 Changing default settings 0 00 00 a 55 Settings Mani ssec sek e EORR CER news 56 To open the Settings menu 2 se 56 EU OE ete nccteeonenede es cae EPIRI EM EIE D RI EE A 57 ouds cooling uere ED bee eee bene eed eee Ru E 57 Display contrast Brightness lisse sees 58 sho rr CIIM 58 MOMON M TCC 58 emperature Unlt ka eoe retos o
4. It is most important that this basic safety requirement is present and regularly tested and where there is any doubt the on site wiring system should be inspected by a qualified electrician The manufacturer cannot be held liable for the consequences of an inadequate earthing system e g electric shock Do not connect the machine to the mains electricity supply by an extension lead Extension leads do not guarantee the required safety of the machine e g danger of overheating The machine is built in accordance with current safety requirements Unauthorised repairs could result in unforeseen dangers for the user for which the manufacturer cannot accept liability Repairs should only be undertaken by a Miele approved technician Ensure current is not supplied to the machine until after maintenance or repair work has been carried out In the event of a fault or for cleaning purposes the machine is only completely isolated from the electricity supply when it is switched off at the mains or the mains fuse is withdrawn Warning and Safety instructions This machine must only be connected to the on site water supply using a new hose kit Old hoses must not be re used Check the hose regularly for signs of wear Change in good time to avoid the risk of leaks and subsequent damage Faulty components must only be replaced by genuine Miele original spare parts Only when these parts are fitted can the s
5. Problem Possible cause Liquid detergent does not give the required result Grey greasy particles cling to washed laundry White residues which look like powder detergent are seen on dark textiles after washing Textiles have particularly greasy soiling Liquid detergents usually contain no bleaching agents They do not remove fruit coffee and tea stains Insufficient amounts of detergent were used to break down the particles of grease in heavily soiled laundry The detergent contained compounds zeolites to aid water softening which are not soluble in water They have ended up on the laundry Use a general purpose detergent containing a bleaching agent Pour stain removers into compartment UY of the dispenser drawer and liquid detergent into a dispenser ball Never put stain removers and liquid detergent together in the dispenser drawer Use more detergent Before washing the next load run a Cottons 95 C programme with powder detergent but without a load Try and brush off the residues with a soft brush once the laundry is dry Wash dark textiles using a detergent which contains no zeolites Liquid detergents usually contain no zeolites Select a programme with pre wash The use of heavy duty detergent is recommended in the main wash for very heavily soiled work clothing Consult detergent producers for advice 35 Problem solving guide The drum door cannot be open
6. m Remove the laundry Check that all items have been removed from the drum Items left in the drum could discolour other items in the next wash or become discoloured themselves m Check the folds in the door seal for any small articles e g buttons which might be lodged there m Close the drum door Otherwise there is the danger of objects being placed inadvertently in the drum If these remained unnoticed and were washed in the next load they could damage the laundry Spinning Final spin speed The maximum final spin speed is determined by the individual programme and cannot be changed See chart Programme rpm Cottons Hygiene 1400 Cottons Uni 1400 Minimum iron 1000 Denim 900 Delicates 600 Quick wash 1400 Woollens 1200 Kitchen linen 1400 Table linen 1200 Curtains 400 Pillows 1400 Outerwear 900 Proofing 800 Sluice 1400 Spin 1400 These programmes are only available if they have been activated via the Settings Supervisor level Rinse and interim spin There is a spin after the main wash and between the rinses You cannot alter this spin speed either 18 Programme chart Cottons Hygiene 95 C Max load 6 5 kg Fabric type Cottons linens or cotton mix fabrics Extra option Pre wash Detergent Powder detergent detergent for coloured fabrics liquid detergent tablet detergent and liquid tab dete
7. plastic filter bar 2 and remove m Clean the plastic filter m Put the filter and seal back in the reverse order and reconnect the hose 32 Turn on the stopcock and check the connection is watertight If water drips out tighten the connection To clean the filter in the water inlet valve m Using pliers carefully loosen the ribbed plastic nut on the inlet valve and unscrew m Use pointed nose pliers to withdraw the plastic filter by the bar see illustration Clean put back and secure The two filters must be put back in place after cleaning Problem solving guide What to do if With the help of the following notes minor faults in the performance of the machine some of which may result from incorrect operation can be put right without contacting the Service Department Repair work to electrical appliances should only be carried out by a suitably qualified person in strict accordance with current local and national safety regulations Repairs and other work by unqualified persons could be dangerous The manufacturer cannot be held liable for unauthorised work The programme does not start The display remains There is no power to Check whether dark the machine the electricity supply to the machine is switched on the fuse or circuit breaker has tripped There is a fault A programme cannot Note what is shown in the message in the display be started while there display is a fault
8. Hygiene This option is visible in the display but not available on this machine The machine is delivered with the option deactivated N B This option is only suitable for use on machines fitted with a dump valve It must not be activated on machines fitted with a drain pump Disinfection This option is visible in the display but not available on this machine Pre wash You can choose for pre wash to be carried out with every Cottons hygiene Cottons universal and Minimum iron programme or to select it on an individual basis via the Extras menu The machine is delivered with the option to select the pre wash from the Menu activated 65 Settings Supervisor level menu 2 Pre wash Kitchen linen An additional pre wash can be carried out in the Kitchen linen programme m Detergent for the additional pre wash should be added to the laundry in the drum The machine is delivered with this option deactivated No rinses Cottons You can alter the number of rinses which are carried out in the Cottons programmes 2 rinses default setting 3 rinses 4 rinses 5 rinses No rinses Min iron You can alter the number of rinses which are carried out in the Minimum iron programme 2 rinses default setting 3 rinses 4 rinses 66 Pre rinse Cottons A pre rinse can be carried out in the Cottons programmes The machine is delivered with this option
9. a ring piped hot water supply The maximum temperature must not exceed 70 C It is not economical to run it from an individual hot water supply if it is not in continuous use as the water in the supply pipes cools down and more energy would be required to reheat the water For hot water connection the same conditions apply as for cold water connection The inlet hose with the red stripes hot water hose is connected to the stopcock For operational reasons the machine must not be connected to hot water only If the machine is not connected to a hot water supply the hot water inlet hose must be disconnected and the water settings for the main wash pre wash and rinses must be reprogrammed The programme durations may be longer 50 Connection to a very hot water supply It is possible to connect the machine to a very hot water supply 70 C toa maximum of 85 C A special inlet hose is required The machine must also be reprogrammed by a Miele service technician or Miele authorised service dealer Installation and connection Connection to drainage Machines with a drain pump The machine drains via a drain pump with a delivery head of 1 metre The drain hose must not be kinked as this would restrict drainage The swivel elbow at the end of the hose can be turned in either direction or can be detached if required with a sharp twist and pull For a delivery head of more than 1 m up to a max
10. coarse soiling N B See Settings Supervisor level Sluice Detergent Powder detergent detergent for coloured fabrics liquid detergent tablet detergent and liquid tab detergent 22 Programme sequence Main wash Rinses Spinning Water Wash Water Rinses Interim Final spin level rhythm level spin Cottons Hygiene k4 ei 2 J J Cottons Uni k uns 2 J J Minimum iron uf bes 2 Vv v Denim les t4 3 v Delicates 88 p 2 J Quick wash k bu 2 J J Woollens W a t 2 J J Kitchen linen ty t 2 Vv v Table linen jus 2 J J Pillows ty 3 J Curtains je pes 3 J Outerwear ty C1 3 vV J Proofing ey 1 J J Sluice te e 3 J J kJ Low water level Normal wash rhythm ke Medium water level B Gentle action High water level Woollens See the following page for more information about the programme sequences These programmes are only available if they have been activated via the Settings Supervisor level 23 Programme sequence This machine has fully electronic controls with automatic load recognition It takes in the right amount of water required for the programme depending on the amount of laundry and its absorbency rate This means that programme cycles and durations can vary The programme sequences outlined in the chart are based on the basic programme with a full lo
11. deactivated Pre rinse Min iron A pre rinse can be carried out in the Minimum iron programme The machine is delivered with this option deactivated Anti crease The anti crease phase at the end of the programme can be activated or deactivated The machine is delivered with this option activated Settings Supervisor level menu Spin free of charge If your machine is fitted with a payment system you can release the Spin programme Free of charge The machine is delivered with this option deactivated Lock If your machine is fitted with a payment system you can activate the lock immediately after the start of the programme The machine is delivered with the lock after 3 minutes option activated External dispenser This machine is suitable for connecting to an external dispensing system The external dispenser setting must be selected before the external dispensing system can be used The machine is delivered with this option deactivated No detergent This option is visible in the display but not available on this machine To close the Settings menu m Select Back and confirm your selection The display will return to the entry menu 67 United Kingdom Miele Co Ltd Fairacres Marcham Road Abingdon Oxon OX14 1TW Tel 01235 554455 Fax 01235 554477 Service Office Tel 08707 554466 E mail info miele co uk Internet www
12. following pages for more information Start button 3 PC Optical interface This is used by service technicians to run diagnostic checks on your machine and can also be used to update programming data in the future Multi function selector This is used to select menu options by turning it and to confirm your selection by pressing it 8 o button Opens the machine door Operating the washer extractor Displays Entry menu The machine is on standby if the display remains dark when you switch the machine on Press the multi function selector Welcome Please select Programme selection Language P The entry menu will appear with Programme selection highlighted Press the multi function selector The Programme selection menu will appear Programme selection menu Cottons Hygiene 35 C Le pte Cottons Uni B C minimum iran Cottons Uni 40 C Denim Iinimium iran B C Delicates If you do not make a selection within approx 20 seconds the display will revert to the entry menu Multi function selector 10 Turning the multi function selector moves the highlighting to the next option Pressing the multi function selector selects the highlighted option You can use the multi function selector to select any programme The highlighting will move up or down depending on the direction the multi function selector is turned in The WA arrows on the right of the display indicate furth
13. miele co uk Ireland Miele Ireland Ltd Broomhill Road Tallaght Dublin 24 Tel 01 46 10 710 Fax 01 46 10 797 Email info miele ie Internet http www miele ie Australia Miele Australia Pty Ltd A C N 005635398 1 Gilbert Park Drive Knoxfield VIC 3180 Telephone 03 9764 7100 Fax 03 9764 7129 Internet www miele com au Distributor New Zealand Steelfort Engineering Company Ltd 500 Rangitikei Street Palmerston North Priv Bag 11045 NZ Telephone 06 350 1350 Fax 06 356 1507 South Africa Miele Pty Ltd 63 Peter Place Bryanston 2194 P O Box 69434 Bryanston 2021 Tel 011 548 1900 Telefax 011 548 1935 E mail info miele co za Internet www miele co za Singapore Miele Southeast Asia Miele Pte Ltd 163 Penang Road 04 02 03 Winsland House II Singapore 238463 Tel 65 67351191 Fax 65 67351161 Email infosea miele com sg Internet www miele sg Hong Kong Miele Hong Kong Limited AIA Plaza 24 Floor 18 Hysan Avenue Causeway Bay Hong Kong Tel 852 2610 1331 Fax 852 2610 1013 E mail mielehk miele com hk Alteration rights reserved 2306 M Nr 06 872 220 00 en GB
14. of 1 8 m a second duo drain pump is available with the corresponding kit from the Miele Spare Parts Department or your Miele Dealer The drain hose may be connected as follows 1 Direct into a sink or basin drain pump version Please note Hook the hose over the edge and secure Make sure that the water can drain away freely without hindrance Otherwise there is a risk of water overflowing or of some of the drained water being sucked back into the machine 2 Connected securely to a plastic drain pipe with a rubber nipple There is no need to use a non return valve 3 Connected securely to a standpipe Seal the hose into the pipe to avoid flooding in case of the drainpipe being blocked 4 Connected securely to a floor gully If required the drain hose can be extended to a length of 5 m The necessary parts can purchased from the Miele Spare Parts Department or your Miele dealer Dump valve version A motorised dump valve is used to drain the machine A DN 70 angle connector can be used for draining the machine via an on site gully with odour trap N B If not supplied with the machine an angle connector is available through the Miele Spare Parts Department 51 Installation and connection Electrical connection U K All electrical work must be carried out by a suitably qualified and competent person in strict accordance with current national and local safety regulations BS 7
15. of the lid where it protrudes to the rear of the machine as well as by the handle recesses at the front Please note m Do not lift the machine by the drum door Ensure that the machine feet and the floor are dry to prevent the machine from slipping during the spin cycle Removing the transit struts m To remove the left and right covers 1 Use a screwdriver to prise out the cover as illustrated 2 Pull the cover forwards to remove 45 Installation and connection m Using the notched end of the spanner supplied turn the left hand then transit strut 90 then m withdraw the transit strut m withdraw the transit strut 46 Installation and connection N The machine must not be moved without the transit struts in place Store them as shown or keep them in a safe place for future use They must be re fitted if the machine is to be moved again e g when moving house Re fitting the transit struts Re fitting is carried out by reversing the procedure m Fit the covers on to the two holes Then plug the holes as shown with the caps m Secure the transit struts to the back of the washer extractor Make sure that holes B are fitted over retainers 47 Installation and connection Levelling the machine The machine must stand perfectly level on all four feet to ensure safe and proper operation Incorrect i
16. 671 in the UK Ensure power is not supplied to the machine until after installation work has been carried out The voltage rated load and fuse rating are given on the data plate Please ensure these match the site mains supply This washer extractor is supplied as standard for connection to either 230 240V 1N 50Hz 25 A fuse rating Or 400V 2N 50 Hz 2 x 13 A fuse rating Connection should be made via a suitable isolator which complies with national and local safety regulations and the on off switch should be easily accessible for servicing work 52 For extra safety it is advisable to install a residual current device RCD with a trip current of 30 mA in accordance with DIN VDE 0664 VDE 0100 Section 739 When switched off there must be an all pole contact gap of 3 mm in the isolator switch including switch fuses and relays acc to VDE 0660 Important for 400 V connection the machine is supplied with a cable in the following colours Black live Brown live Blue neutral Green and yellow earth WARNING THIS APPLIANCE MUST BE EARTHED N Do not use devices to turn the machine off automatically e g auto matic timers Technical data Height Width Depth Depth with door open Weight Maximum floor load Capacity Voltage Connected load Fuse rating UK Noise level during spin sound pressure according to German 3 GSGV Water flow pressure min Water f
17. accessory 43 Installation and connection The washer extractor is not suitable for building under Installation on a raised plinth The machine can be installed on a steel plinth base available open or closed or on a concrete plinth m Secure the front feet of the washer extractor with the clamps supplied when installing on a concrete plinth m Follow the fitting instructions supplied Washer dryer stack A Miele tumble dryer can be stacked on top of this washer extractor The appropriate stacking kit WTV is required The stacking kit must be fitted by a Miele authorised service technician 44 Replacing the lid If the lid has been removed in order to fit the washer dryer stack ensure that if the lid is ever replaced it fits securely into the rear holders Otherwise it is not properly secure for transport Payment system This washer extractor can be fitted with a payment system This must be connnected and programmed by a Miele service technician or authorised dealer Coins tokens must be removed from the payment system regularly otherwise it will become blocked Automatic switch off devices such as timers must not be fitted to this machine as the machine must remain connected to the electricity supply so that the drum door can be opened The sticker supplied with the text This machine must be connected to the electricity supply to allow the door to b
18. ad Extra options which can be selected have not been taken into account The programme sequence display shows the stage the programme has reached 24 Special features in the programme sequences Anti crease At the end of every programme with the exception of the Woollens programme the drum continues to turn at intervals for up to 30 minutes to help prevent creasing The door can be opened and laundry removed at any time during the anti crease phase Run up to spin A run up to spin is carried out before the wash process begins to deflate air from the pillows Subsequent water intake for the main wash is through compartment UU X Pre rinse A Pre rinse without detergent is carried out automatically to remove dust xS In the Outerwear programme laundry is only spun after the main wash gt Pre rinse 2 rinses are carried out at the beginning of the programme to remove any coarse soiling Garment care label symbols Washing lroning The figure quoted in the bucket is the maximum temperature the garment can be washed at The number of bars under the symbol indicate the level of agitation permitted The number of dots indicates the ironing temperature ZA Hotiron max sole plate temp approx 200 C ZA Medium hot iron max sole plate temp approx 150 C ZA Cool iron max sole plate temp approx 110 C Do not steam iron garments carrying this symbo
19. afety standards of the machine be guaranteed If the connection cable is faulty it must only be replaced by a Miele approved service technician to protect the user from danger In countries where there are areas which may be subject to infestation by cockroaches or other vermin pay particular attention to keeping the machine and its surroundings ina clean condition at all times Any damage which may be caused by cockroaches or other vermin will not be covered by the machine guarantee Use This equipment may only be used in mobile installations such as ships caravans aircraft etc if a risk assessment of the installation has been carried out by a suitably qualified engineer Do not install this machine in rooms where temperatures below freezing may occur Frozen hoses may burst under pressure The reliability of the electronic control unit may be impaired at temperatures below freezing point Before using the machine for the first time check that the transit struts at the rear of the machine have been removed see section on Installation During spinning a transit strut which is still in place may result in damage to both the machine and adjacent furniture or appliances Turn off the stopcock if the machine is to be left for any length of time e g holiday especially if there is no floor drain gully in the immediate vicinity If hooking the drain hose of a drain pump machine into a wash basin check
20. ails Energy saving tips Energy and water consumption Water consumption and energy usage are determined by the size of the load To make the most out of your machine load the maximum dry load for the programme you are using If smaller loads are washed using the Cottons programmes the automatic load recognition system will reduce the amount of water time and energy used Detergent Do not exceed the amounts of detergent recommended by the manufacturer on the packaging Reduce the amount of detergent for smaller loads Contents Caring for the environment iii i le esse 2 Disposing of the packing material liiis 2 Disposal of your old machine iisiiiss sees 2 Energy savingtlpS e seen 2 Warning and Safety instructions 0 0 0 0 6 Operating the washer extractor 222 0 000 li i e ess 9 Control panels ud RE eO eee dead de nee lead rn 9 Displays acad susce oe da oe dC eee dede Seas I t REA ne i e dL f 10 Before using for the first time 0 00 00 a 12 How to wash correctly 0 000002 illl ills 14 Brief inStF GHORS iussa eR eR a Ron DR RC CIR KORR OCC CER ca 14 SPINNING 35 5 45 0395 desc ee e EIE hie teamed tte eae 18 Finalispim Speed us ies eed eriden e een 18 Rinse and intenni SPIN u 320 re hohe en deed wea 18 Programme chart 0 000000 lll es 19 Programme sequence iusuis
21. d confirm your selection If you do not make a selection in the sub menu within approx 20 seconds the menu display will revert to the Settings menu Although the Time of day and Memory settings are visible in the display they are not available on this machine To close the Settings menu m Select Back and confirm your selection The display will return to the entry menu 56 Settings menu F Language P The machine is delivered with Suds cooling activated The display can be set to appear in one of several different languages To select the language you want goto Time of day the Languages sub menu This option is visible in the display m If the language shown is not the one but not available on this machine you want turn the multi function selector to highlight the one that you do want and confirm your selection The flag after the word Language acts as a guide to prevent a language which will not be understood from being set The different language setting will only apply to the programme currently in use After the programme has finished the display will revert to the default language Suds cooling When this is activated additional water flows into the drum at the end of the main wash to cool the suds down Hot suds can damage plastic drainage pipes Suds cooling takes place when temperatures of more than 70 C are selected Suds cooling should be activated to pr
22. e opened On no account should the door be opened with force should be placed near to the machine where it can be seen easily All items marked are available to order from your Miele Dealer or from the Miele Spare Parts Department Installation and connection Installation surface Do not install the machine near or directly above an open gully or floor drain Moisture from these can penetrate the machine and damage the electric components A concrete floor is the most suitable installation surface being far less prone to vibration during the spin cycle than wooden floorboards or a carpeted surface NI the machine is installed on an on site concrete or brick plinth it must be secured using the clamps supplied with the machine Otherwise there is the danger of the machine moving about m The machine must be level and securely positioned m To avoid vibrations during spinning the machine should not be installed on soft floor coverings If installing on a wooden joist floor m We recommend a plywood base at least 70 x 60 x 3 cm The base should span several joists and be bolted to the joists and not only to the floorboards Check for the presence of pipes and cables first If possible install the machine in a corner as this is usually the most stable part of the floor Installing the washer extractor To manoeuvre the machine out of its packing case to its installlation site hold it by the edge
23. e porthole glass when the drum door is open PC Optical interface The indicator or check light marked PC on the fascia panel is the interface used by Miele service technicians during servicing work for testing purposes and for updating the machine s programme data Optional accessories Optional accessories for this washer extractor are available from your Miele Dealer or from the Miele Spare Parts Department Please note that telephone calls may be monitored and recorded for training purposes 41 Installation and connection Front view Inlet hose cold water Access to drain filter drain pump or Inlet hose hot water dump valve and emergency release 3 Mains connection cable Heignbedjusisbleieel Control panel Plinth amp 9 Clamps for installing on a concrete 8 Detergent dispenser drawer plinth SDIUm door Handle recesses for moving the machine 42 Installation and connection Rear view amp TN l T M LT N I gt CSS ANU Cl SS 2 mtt LR 4 MM Transit strut covers DProtruding lid for holding when EOIN Ne maghine Inlet hose cold water Inlet hose hot water 2 Holder for Inlet hose Drain hose for drain pump Drain hose Drain hose for dump valve Transit struts when removed Height adjustable feet 3 Mains connection cable optional
24. e these products in this machine Avoid contact of stainless steel surfaces front lid casing with liquid cleaning and disinfecting agents which contain chlorine or sodium hypochlorite These agents can have a corrosive effect on stainless steel Aggressive vapours containing chlorine bleach can also be corrosive Do not store open containers of these agents near the machine 8 Safety with children This machine is not a toy To avoid the risk of injury do not allow children to play on or near it or to play with the controls Supervise its use by the elderly or infirm and supervise children whilst you are operating the machine For machines with a porthole door remember that the porthole glass will be hot when washing at very high temperatures Do not let children touch it Accessories Accessory parts may only be fitted when expressly approved by Miele If other parts are used guarantee performance and product liability claims will be invalidated Disposal of your old machine Before discarding an old machine disconnect it from the electricity supply Cut off the cable directly behind the machine to prevent misuse This should be done by a competent person The manufacturer cannot be held liable for damage caused by non compliance with these Warning and Safety instructions Operating the washer extractor Control panel COo o i Display See the
25. ed by pressing the o button There is no power to the Check whether machine the electricity supply to the machine is switched on the fuse or circuit breaker has tripped Open the drum door as described in the next section The door was not Press hard against the lock side of the drum door correctly engaged and then press the oa button There is still water in the The drainage system may be blocked Clean the drum and the machine is drainage system as described in the next section unable to drain For safety reasons the drum door cannot be opened if the suds temperature is higher than 55 C 36 Problem solving guide Opening the drum door in the Machines with a drain pump event of a blocked drain outlet If the drain outlet is clogged a large and or power failure amount of water will be retained in the machine up to 30 litres Disconnect the machine from the mains electricity supply N Caution if laundry has been washed at a high temperature water There is a lever behind the detergent draining out of the machine will still drawer fascia panel be hot Danger of scalding m Place a suitable container under the access flap When draining water from the machine do not unscrew the drain filter completely or take it right out m Remove the lever m Unscrew the drain filter lid until water runs out To interrupt the flow of water m lighten the drain filter back
26. er options Pressing the multi function selector takes you to the main menu of the wash programme selected Operating the washer extractor Wash programme main menu Cottons Uni i 1400 rpm Settings menu Duration 0 47 h Back The main menu shows the temperature and spin speed for the wash programme selected The Pre wash extra option is highlighted Press the multi function selector to deselect select Pre wash To return to the Programme selection menu turn the multi function selector to highlight Back and then press the multi function selector to confirm your selection The Settings menu is used to alter the washing machine s electronics to suit different requirements See Settings menu for more details Before using for the first time Before using the machine for the first time ensure that it is correctly installed and connected See Installation and connection Also check that the drain filter is securely tightened to prevent the risk of water leaks during use For safety reasons spinning is not possible until the machine has been prepared for using for the first time To activate the spinning function you must run a wash programme without laundry and without detergent m Open the stopcocks Welcome screen When the washer extractor is switched on for the first time a welcome screen will appear Miele Professional Welcome The welcome screen will not appear again after the first programme ha
27. event the danger of scalding if the drain hose is hooked over the edge of a sink or basin where the drainage pipes do not comply with DIN 1986 57 Settings menu Display contrast Brightness There are ten different display contrast and brightness settings The display contrast brightness will change as soon as a different setting is chosen m Confirm your selection with the multi function selector Standby To save energy the display goes out after 10 minutes and the indicator light for the Start button flashes slowly Operating the multi function selector switches the display back on again There are three options On Standby comes on if a programme is not selected within 10 minutes of the machine being switched on 10 minutes after a programme has started 10 minutes after the end of a programme Not in current prog the machine is delivered with this option selected Standby comes on if a programme is not selected within 10 minutes of the machine being switched on 58 Off The display remains on all the time Memory This option is visible in the display but not available on this machine Temperature unit You can chose for the temperature to be displayed as C Celsius default setting or F Fahrenheit The machine is delivered with the C option selected Settings Supervisor level menu The Settings Superv
28. fter the programme has started m Press the door button oa to open the drum door m Add or remove items m Close the drum door The programme will continue automatically 26 Please note Once a programme has started the machine cannot recognise any adjustment to the load For this reason if laundry is added or removed after the start of a programme the machine will always complete the programme cycle assuming a full load which can lead to an increase in the programme duration shown in the display The door cannot be opened if the suds temperature is above 55 C the water is above a certain level the programme has reached the Final spin stage If the machine is connected to a payment system the machine will lock itself after 3 minutes You will then not be able to cancel the programme or to open the door Detergent All modern detergents produced for automatic washing machines are suitable including liquid compact concentrated tablets and special application detergents Use dispensing aids e g balls if these are supplied with the detergent Tablets are suitable for full loads but note that it may be impractical to reduce tablets by proportion to suit smaller loads Some tablets do not dissolve as rapidly as others and may not be suitable for programmes with short durations Woollens and knitwear containing wool mixtures and hand washable garments should be washed using a deter
29. g For spinning garments Please make sure you select the appropriate spin speed 20 Programme chart Further programmes The following programmes can be selected from the Settings Supervisor level menu Kitchen linen 60 C Max load 6 5 kg Item Kitchen linen made from cotton and linen fabrics e g chef s whites catering uniforms serving cloths floor cloths Note Select Pre wash for stubborn soiling Use a detergent containing enzymes for the pre wash Extra option Pre wash Detergent Powder detergent detergent for coloured fabrics liquid detergent tablet detergent and liquid tab detergent Table linen 40 C Max load 2 5 kg Item Cotton linen and mixed fibre table linen such as tablecloths and napkins Note Use a detergent containing enzymes for stubborn soiling Detergent Powder detergent detergent for coloured fabrics liquid detergent tablet detergent and liquid tab detergent Curtains 30 C Max load 3 0 kg Item Curtains including net curtains specified as machine washable by the manufacturer A pre rinse without detergent is carried out automatically to remove dust Extra option Pre wash Detergent All purpose powder detergent powder detergent for coloured fabrics Pillows 60 C 2 pillows 40 x 80 cm or 1 pillow 80 x 80 cm Item Washable pillows with feather down or synthetic fillings Note Please observe the instruction
30. ge in the Languages sub menu m f the language shown is not the one you want turn the multi function selector to highlight the one that you do want and confirm your selection Sort languages You can select the order that you want the languages available to appear in in the display if you have first selected the International or International 4 langs option from the Language menu in the Settings menu Language menu You can select whether you want the welcome screen asking for a language to be selected to appear again after the end of a washing programme and before the entry menu Supervisor level You can alter the access code to the supervisor level m Enter the old code m Enter anew code After you have confirmed the new code the display will change to the beginning of the Settings menu There are three options National The welcome screen does not appear default setting International The welcome screen will appear and the language must then be selected Any available language can be selected Follow the Sort languages setting International 4 langs The welcome screen will appear and the language must then be selected One of four languages can be selected Follow the Sort languages setting 61 Settings Supervisor level menu Intensive Water plus This option is visible in the display but not available on this machine Save This option is visible in t
31. gent specifically designed for washing woollens Instructions for use and recommended amounts for a full load are given on the detergent packaging Liquid detergent should be dispensed using a ball provided by the manufacturer for programmes without a pre wash When using liquid detergent for programmes with a pre wash you will need to purchase a special container from the Miele Spare Parts Department which sits in the main wash compartment UY of the detergent dispenser drawer Add liquid detergent to this container for the main wash and to compartment LU for the pre wash The right amount to dispense will depend on the following The soiling level of the laundry Lightly soiled No visible dirt or stains Possibly slight body odour Normally soiled Visibly dirty and or just a few slight stains Heavily soiled Stains and soiling clearly visible The water hardness level Check with your local water supplier if you do not know the hardness level in your area The quantity of the laundry add the recommended amount of detergent 27 Detergent Water softeners A water softener can be used to cut down on the use of detergents in hard water areas Dispense according to the amount specified on the packaging First add detergent and then the water softener Use a quantity of detergent as for soft water Miele do not recommend connecting the machine to an on site water softener Washing with
32. gent to the compartments as follows LU Detergent for the pre wash 1 4 of the total amount recommended This compartment is also used for starch formulations when starching separately E Detergent for the main wash d I Fabric conditioner or liquid starch m Close the detergent drawer How to wash correctly Q Start the programme The Start button will flash as soon as a programme can be started m Press the Start button The Start button will light up The estimated programme duration will appear in the display This will count down in one minute steps During the first 10 minutes the machine measures how much water is being absorbed by the laundry The programme duration may be shorter depending on this absorbency rate The programme sequence is also shown in the display The washer extractor shows you when each section of the programme is reached The drum lighting switches off once the programme has started Q Remove the laundry Only remove laundry from the machine once the drum has stopped turning Reaching into a moving drum is extremely dangerous and could result in injury If laundry is not removed immediately the programme has finished the anti crease phase will begin and the drum will turn at intervals to help prevent creasing Anti crease will flash alternately with Finish in the display to indicate that the programme has finished m Press the oa button to open the drum door
33. gramme durations will be longer and will vary from the time remaining shown in the display The machine will need to be set up specifically for Recycled water if this option is selected The machine is delivered with the Hot water option selected The machine will need to be set up specifically for Recycled water if this option is selected Low water pressure This setting can be activated to ensure problem free water intake where the water pressure is constantly low below 100 kPa The machine is delivered with the option deactivated 63 Settings Supervisor level menu Water level Cottons Pre wash duration Cottons You can increase the water level for the main wash in the Cottons programmes You can lengthen the duration of the pre wash in the Cottons programmes The machine is delivered with the Block parameters option selected the water level will be controlled according to the programme data which has been programmed ex works Water level Min iron The machine is delivered with the Block parameters option selected the wash duration will be controlled according to the programme data which has been programmed ex works Wash time Cottons You can increase the water level for the main wash in the Minimum iron programme You can increase the wash duration for the main wash in the Cottons programmes The machine is delivered with the Block parameters option selected t
34. he display but not available on this machine Water plus This option is visible in the display but not available on this machine 62 Auto load control The washer extractor has auto load control The water level and the programme durations are adjusted according to the load If the auto load control is deactivated the machine will always carry out the programme sequence based on a full load The machine is delivered with this option activated Settings Supervisor level menu Pre wash water Rinse water You can choose for the pre wash to be carried out with either hot or cold water not available with the Curtains programme Hot water can only be only taken in if the wash temperature is above 30 C You can choose for the rinses in the Cottons hygiene Cottons Uni Minimum iron Kitchen linen and Sluice programmes to be carried out with either hot or cold water Hot water can only be only taken in if the wash temperature is above 50 C The machine is delivered with the Hot water option selected Main wash water You can choose for the main wash to be carried out with either hot or cold water not available with the Woollens Curtains and Proofing programmes Hot water can only be only taken in if the wash temperature is above 30 C The machine is delivered with the Hot water option selected If the machine is not connected to the hot water supply the pro
35. he water level will be controlled according to the programme data which has been programmed ex works Pre wash temp cot The machine is delivered with the Block parameters option selected the wash duration will be controlled according to the programme data which has been programmed ex works Wash time Min iron You can set the temperature you want the pre wash to be carried out at in the Cottons programmes You can increase the wash duration for the main wash in the Minimum iron programme The machine is delivered with the Block parameters option selected the temperature will be controlled according to the programme data which has been programmed ex works 64 The machine is delivered with the Block parameters option selected the wash duration will be controlled according to the programme data which has been programmed ex works Settings Supervisor level menu No of programmes You can extend the number of programmes available Sluice This option activates the additional sluice programmes O additional programmes the machine is delivered with this option selected 4 additional programmes Table linen Pillows Curtains and Kitchen linen 2 additional programmes Outerwear and Proofing 6 additional programmes all the above named programmes Quick wash The Quick wash programme can be activated The machine is delivered with the Quick wash programme deactivated
36. ht damage plastic surfaces and other components because of the chemicals they contain Cleaning the detergent dispenser drawer Remove detergent residues regularly m Pull out the detergent dispenser drawer until a resistance is felt Press down the release catch and at the same time pull the drawer right out of the machine m Clean the detergent drawer with warm water Cleaning and care Cleaning the detergent dispenser drawer housing m Clean the siphon 1 Remove the siphon from compartment amp and rinse under m Use a bottle brush to remove warm running water Clean the detergent residues and limescale siphon tube in the same way from the jets inside the detergent 2 Replace the siphon Giawerieusing If starching frequently thoroughly clean the siphon and siphon tube regularly A build up of starch will cause them to get clogged N Do not use a hose to wash the machine down 31 Cleaning and care Cleaning the water inlet filters The machine has two filters to protect the water inlet valve These filters should be checked every six months or so or more often if there are frequent interruptions to the external water supply To clean the filter in the inlet hose m First turn off the stopcock m Unscrew the threaded union connecting the free end of the inlet hose to the stopcock m Remove the rubber seal 1 from the recess m Using pointed pliers take hold of the
37. isor level is locked with a code to prevent it being accessed by non authorised personnel The Language F setting can still be altered Selecting settings Back 4 Language F Supervisor level m Select Supervisor level and confirm your selection Settings Back Supervisor level Access via code m Select Access via code and confirm your selection To enter the code Enter the code 0 0 0 factory default setting If you enter the code wrongly three times the machine will lock out for an hour Enter code m Turn the multi function selector until the first number appears Confirm your selection of this number Now set the second number 59 Settings Supervisor level menu Repeat the process until all three numbers have been entered To confirm the lock code 000 Confirm code Code accepted Menu opened You are now in the Supervisor level You can alter all the settings described previously as well as the settings on the following pages Although the settings Intensive Water plus Water plus Save Hygiene Disinfection and No detergent are visible in the display they are not available on this machine You can alter the code if you want to prevent it being accessed by unauthorised personnel 60 Settings Supervisor level menu Language F The display can be set to appear in one of several different languages You can set the language you want as the fixed default langua
38. l Ki Do not iron Professional cleaning Dry clean only The letters indicate the type of cleaning agent required No bar under the symbol normal agitation One bar under the symbol reduced agitation Two bars under the symbol much reduced agitation 91 Hand wash if no temperature is specified use the lowest temperature or cold XI Do not wash Drying Professional Wet Clean only The number of dots indicates the drying temperature eoo Do not dry clean Normal temperature Bleaching Low temperature El Do not tumble dry gt Any oxidising bleaching agent can be used Only use an oxygen based bleach or a non chlorine bleach x Do not bleach 25 Changing the programme sequence Altering a programme After the start of a programme it is no longer possible to select a different programme You will need to cancel the current programme before you can select a new one Cancelling a programme You can cancel a programme at any time after it has started m Turn the multi function selector until Cancel is highlighted and then press the multi function selector to confirm your selection The suds will be pumped away m Open the drum door before starting a new programme Adding or removing laundry after a programme has started In some programmes you can add or remove laundry a
39. low pressure max Inlet hose length Connection cable length Drain pump head max applies to drain pump machines only Lamp for drum lighting Test certificates awarded 85 0 cm 59 5 cm 72 0 cm 112 cm 109 kg 2778 Newton approx 278 kg 6 5 kg dry laundry see data plate see data plate see data plate 70 dB A 100 kPa 1 bar 1000 kPa 10 bar 1 60m 1 60m 1 00m Type G4 5 watts 12 volts Radio TV suppression VDE 53 54 Changing default settings Default settings can be altered to adapt the machine to different requirements The way these are accessed by the operator will depend on how the machine has been programmed Some settings are visible and can be changed by all operators via the Settings menu P All settings can be locked to prevent unauthorised access They are then only accessible under Settings Supervisor level by entering an access code Please speak to the Miele Service Department for details 55 Settings menu To open the Settings menu Cottons Hygiene 35 C T pte 3c Cottons Uni Bt Iinimum iran 30 C Cottons Uni 40 C Denim 40 C Iiinirnum iran Bt Delicates 30 C v m Inthe Programme selection menu turn the multi function selector until Settings Pr is highlighted and press the multi function selector to confirm your selection Selecting settings Back Language P Suds cooling Time m Select the setting you want to change an
40. lsi eile ee 23 Garment care label symbols 0 0000 liess 25 Changing the programme sequence les e leise 26 Altering a programme sssil es 26 Cancelling a programme s sasas aaaea 26 Adding or removing laundry after a programme has started 26 Detergent obo eI PME a ede ee 27 Water SOMeners sens 44 0 0 wer nae Rom PRIOR ERED Ee RR CARA u 28 Washing with several components ii iles 28 External dispensing SYSTEM is ep Le gene Re a en 28 Contents Fabric conditioners and liquid starch 0 0 0 0 ce 29 Automatic dispensing of fabric conditioner or liquid starch to laundry at the end of a prograMMe s neces ererat ereptum Kiauna eee 29 Colour run and dye removers dyes ie ee tees 29 Cleaning and care 0 0 00 ills 30 Cleaning the water inlet filters lee 32 Problem solving guide 222 0 0 0 eee 33 What todo M id esa tagien tk erpe POSE pads EEDA Ooh tp eR ergo 33 The programme does not start 2 aaua 33 General problems 000 0c cette ae 34 An unsatisfactory wash result 0 eee 35 The drum door cannot be opened by pressing the O button 36 Opening the drum door in the event of a blocked drain outlet and or powera uia Gian 282 aR a aee Sos Pace SER vcn doas ifs 37 Changing the lamp for the drum lighting oils 40 After sales service iioii liil ille 41 PC Optical interfaee
41. message in Press the multi function the display selector which will confirm the message The fault message will be deleted The display is dark and The display has Press the multi fuction the Start button is switched off selector Standby comes to an flashing slowly automatically to save end energy Standby mode 33 Problem solving guide General problems The machine shakes The machine feet are not Level the machine see during the spin cycle level Installation The pump makes This is not a fault These noises occur at the end of a strange noises pump sequence as a normal part of the operation Large amounts of The water supply pressure is Clean the filter in the detergent residue too low water inlet remainn the Powder detergent used in In future add washing detergent dispenser conjunction with water powder into the drawer softeners tends to become _ dispenser drawer first sticky and then add the water softener Fabric conditioner is The siphon tube is not Clean the siphon see not completely correctly positioned or is Cleaning and care dispensed or too clogged up Cleaning the detergent much water remains in dispenser drawer the amp compartment The display is in a A different language has Set the language you different language been selected in Settings P want The flag symbol Language P will guide you 34 Problem solving guide An unsatisfactory wash result
42. nd small items gives better wash results and also helps distribute the load evenly during spinning The most efficient use of energy and water is achieved when a full load is washed However do not overload as this causes creases and reduces cleaning efficiency m Shut the door with a gentle swing Make sure that no garments are caught between the drum door and seal O Select a language m Select the language you want O Select a programme Select a programme from the Programme selection menu m f Pre wash is available for the programme select it if wished Payment system If your machine has a payment system the amount of credit required will appear in the display Credit will be lost if the door is opened or the programme cancelled after it has started How to wash correctly Q Add detergent Take the level of soiling and water hardness into account It is important to dispense the correct amount because too little detergent results in Laundry not getting properly clean and with time it may become grey and hard to the touch Greasy particles clinging to the laundry Limescale deposits on the heater elements too much detergent results in Excessive foam which causes a low level of agitation and poor wash rinse and spin results A burden to the environment See Detergent for further information m Pull out the detergent drawer and add deter
43. nnect the machine from the electricity supply see Warning and Safety instructions m Remove the yellow lever from behind the detergent drawer fascia panel m Insert the lever in the slot provided in the drum lighting unit see illustration and turn anti clockwise a quarter turn until you feel a resistance m Pull out the loosened unit with your fingers 40 1 2 m Press the two prongs to separate the plastic holder 1 from the protective cover 2 m Remove the faulty lamp from the plastic holder The new lamp must be of the same type G4 with a maximum power output of 5 watts 12 volts The lamps are available from an electrical retailer your Miele Dealer or from the Miele Spare Parts Department m Insert the new lamp into the plastic holder m Carefully fit the plastic holder and the protective cover together m Insert the lighting unit into the socket and turn it clockwise to secure it It is absolutely essential for the correct functioning of the washer extractor that the drum lighting unit is fitted correctly in position After sales service In the event of any faults which you cannot remedy yourself please contact your Miele dealer or the Miele Service Department see back cover for contact details When contacting your Dealer or the Service Department please quote the model and serial number of your machine both of which are shown on the data plate visible above th
44. nstallation may increase electricity and water consumption and may cause the machine to move about 48 Screwing out and adjusting the feet The four adjustable screw feet are used to level the machine All four feet are screwed in when the machine is delivered m Using the spanner supplied turn counter nut 2 in a clockwise direction Then turn counter nut 2 together with foot 1 to unscrew m Use a spirit level to check the machine is standing level m Hold foot 1 securely with a pipe wrench Turn counter nut 2 again using the spanner supplied until it sits firmly up against the housing N AIl four counternuts must sit firmly up against the housing Please also check this for the feet which did not need adjustment Otherwise there is the danger of the machine moving about Installation and connection Plumbing This machine is approved for all UK applications as suitable for category 5 The product is listed in the WRAS regulations advisory scheme directory and is suitable for direct connection to mains drinking water No special plumbing arrangements e g break tanks are required Two Water Council approved double check valves are supplied in the accessories pack provided with this machine They should be fitted in between the stopcocks and the water inlet hoses The machine should be connected to a mains water supply in accordance with local and national safety regulations The machine is designed t
45. o operate with a flow pressure of between 1 and 10 bar 100 kPa and 1 000 kPa At higher water pressures it is essential to fit a reducer valve Connection to the water supply should be carried out by a qualified plumber and should incorporate a stopcock with a 3 4 thread The stopcock should be fitted by a qualified plumber The machine is supplied as standard with two hoses for connection to a hot and cold water supply Connection to the cold water supply The cold water inlet hose blue stripes must be connected to the on site cold water supply via a 3 4 threaded union It is not suitable for connection to a hot water supply NThe connection point is subject to mains water pressure Turn on the stopcock slowly and check for leaks Correct the position of the washer and union if appropriate Maintenance and care Only use a genuine Miele hose should you ever need a replacement Miele hoses are tested to withstand pressure of at least 70 bar 7 000 kPa In order to protect the water inlet valve the two dirt filters one in the open end of the inlet hose one at the inlet point in the machine must not be removed Extension hose Longer hoses 2 5 or 4 0 m in length are available from your Miele dealer or the Miele Spare Parts Department as optional extras 49 Installation and connection Connection to the hot water supply To keep electricity consumption costs down this machine can be connected to
46. rgent Cottons Uni 40 C 60 C Max load 6 5 kg Fabric type Cottons or cotton mix fabrics e g T shirts trousers Note For dark coloured fabrics use a detergent for coloured fabrics or liquid detergent Extra option Pre wash Detergent Powder detergent detergent for coloured fabrics liquid detergent tablet detergent and liquid tab detergent Minimum iron 30 C 40 C 60 C Max load 3 5 kg Fabric type Synthetics mixed fibres and easy care cottons Extra option Pre wash Detergent Powder detergent detergent for coloured fabrics liquid detergent detergent for delicates tablet detergent and liquid tab detergent Denim 40 C Max load 3 5 kg Note Wash denim inside out Denim often contains excess dye and will run during the first few washes Wash light and dark coloured items separately Detergent Liquid detergent for coloured fabrics Programme chart Delicates 30 C Max load 2 5 kg Fabric type For delicate garments made of synthetic fibres mixed fibres rayon and easy care cottons Extra option Pre wash Detergent Liquid detergent for delicates Woollens W 30 C Max load 2 5 kg Fabric type Machine washable or hand washable wool or wool blend fabrics Detergent Liquid detergent for machine washable woollens Drain For draining water from the machine Spin Max load 6 5 k
47. s been completed After four seconds the display will change to the screen for setting the language Language F m Select the language you want and confirm your selection Reminder to remove transport struts The machine will remind you to remove the transport struts m Remove the transport struts if this has not already been done by your fitter Then press the multi function selector to confirm that this has been done Before using for the first time Running your first programme Welcome Please select Programme selection Language F m Turn the multi function selector until Programme selection is highlighted and then press the multi function selector to confirm your selection m Select Cottons Uni 60 C and confirm your selection The main menu for Cottons Uni will appear Cottons Uni 1400 rpm Duration 0 47 h Back m Press the flashing Start button the machine door must be closed When this programme has finished your machine is ready for using for the first time How to wash correctly Brief instructions The headings numbered O show the operating sequence and can be used as brief instructions Q Sort the laundry m Empty all pockets N Foreign objects e g nails coins paper clips etc can cause damage to garments and components in the machine Removing marks m Badly soiled areas stains etc should be removed as soon as possible preferably whilst
48. s on the wash care label Detergent Liquid detergent 21 Programme chart Outerwear 40 C Max load 3 0 kg Item Outerwear made from micro fibres such as Gore Tex Sympatex Windstopper etc Note Zip up jackets before washing Do not use fabric conditioner Detergent Specialist detergent Proofing 30 C Max load 3 0 kg Item For treating microfibre fabrics ski wear fine closeweave cotton garments poplin or tablecloths to provide a water and dirt resistant finish Note The items should be freshly washed and spun or dried before proofing For best results the items should be heat treated afterwards either in a tumble dryer or by ironing Proofing Only use proofing agents which are stated by the manufacturer agent as being suitable for use on membrane textiles as these consist of fluorochemical compounds Do not use proofing agents which contain paraffin Place the container for liquid detergent in compartment Vl and add proofing agent Quick wash 40 C Max load 3 5 kg Fabric type Very lightly soiled fabrics which can be washed in a Cottons programme Detergent Powder detergent detergent for coloured fabrics liquid detergent Sluice High or Sluice Low Max load 4 0 kg Fabric type Heavily soiled linen and cottons or cotton mix fabrics including nappies Note Two pre rinses are carried out at the beginning of this programme for removing
49. s peo tok o epos au UR edo oa e egeta 58 Settings Supervisor level menu 0 000000 0c eee eens 59 Warning and Safety instructions To avoid the risk of accidents and damage to the machine please read these operating instructions carefully before using it for the first time They contain important information on its safety use and maintenance Keep these instructions in a safe place and ensure that new users are familiar with the content Pass them on to any future owner of the machine Correct use Only use this washer extractor to wash items which are specified by the manufacturer to be machine washable on the wash care label and textiles composed of hand washable wool or wool blend fabrics as well as satin lace silk and other hand washable garments Any other applications may be dangerous The manufacturer is not liable for damage resulting from improper use or operation Technical safety Before setting up the machine check it for any externally visible damage Do not install or use a damaged machine Before connecting the machine ensure that the connection data on the data plate voltage and connected load match the mains electricity supply If in any doubt consult a qualified electrician The electrical safety of this machine can only be guaranteed when continuity is complete between the machine and an effective earthing system which complies with local and national safety regulations
50. several components If you wash using several components e g special application detergents we recommend always dispensing the agents into compartment U in the following order 1 Detergent 2 Water softeners 3 Stain remover This way the agents are distributed more evenly 28 External dispensing system This machine is suitable for connecting to an external dispensing system A conversion kit is required which must be fitted by a Miele approved service technician Detergent Fabric conditioners and liquid starch Fabric conditioners make garments soft to handle and help prevent static cling when tumble drying Starch stiffens and gives body to items of laundry e g shirts tablecloths and bed linen m Dispense according to the amount specified on the packaging Automatic dispensing of fabric conditioner or liquid starch to laundry at the end of a programme 2h XJ m Add the fabric conditioner or liquid starch to compartment amp Do not exceed the maximum level mark It will be automatically dispensed in the last rinse At the end of the programme a small amount of water remains in the fabric conditioner compartment amp If starching frequently clean the dispenser compartment and especially the siphon the tube and conditioner channel regularly See Cleaning the detergent dispenser drawer Colour run and dye removers dyes m Do not use colour run or dye removers in this machine
51. still fresh Spillages should be carefully dabbed off using a soft colourfast cloth Do not rub Badly soiled areas can be pre treated with liquid detergent stain removers etc first following the manufacturer s instructions With particularly stubborn stains ask your dry cleaner for advice N Do not use solvent based cleaning agents in this machine m Sort the laundry by colour and by care label Most garments have a textile care label in the collar or side seam Dark textiles often contain excess dye and should be washed separately several times before being included in a mixed load Always wash whites and coloureds separately Curtains Remove lead weights first or place in a laundry bag Underwiring and collar stiffeners Any loose wiring in bras shirt collar stiffeners etc should be removed or sewn in Knitted garments trousers and jeans T shirts and sweat shirts Turn inside out if recommended by the manufacturer Close any zips fasten hooks and eyes etc before washing Fasten duvet covers etc to prevent small items from being rolled up inside them Do not wash any items in this machine which are specified by the manufacturer as not washable on the care label SX symbol How to wash correctly Load the drum m Press the o button and open the drum door The interior drum lighting will come on m Unfold the laundry and load loosely in the drum Mixing both large a
52. that the water can drain off quickly enough to prevent the sink from overflowing Make sure the drain hose is secure so that the force of the water flowing out of the hose does not dislodge it Otherwise this will result in flooding Take care to ensure that foreign objects e g nails pins coins paper clips do not find their way into the machine with the laundry These may damage components of the machine e g suds container drum which in turn can result in damage to the laundry Warning and Safety instructions If the correct amount of detergent is dispensed the machine should not need to be descaled If however you do wish to descale the machine only use proprietary non corrosive descaling agents and strictly observe the instructions on the packaging If in doubt contact the Miele Professional Dept or your Miele Dealer Textiles which have been pre treated in solvent based cleaning agents must be thoroughly rinsed in clean water before being washed in the machine Never use solvent based cleaning agents in this machine as this may result in damage to component parts and create toxic fumes Such detergents also pose a fire and explosion hazard Only use dyes specified by the manufacturer as being suitable for use in a washing machine Always observe the manufacturer s instructions carefully Colour run and dye removers contain sulphur compounds which can cause damage such as corrosion Do not us
53. up again m Use it to open the access flap 37 Problem solving guide Once the flow of water ceases N Make sure the drain filter is securely tightened Otherwise there is a risk of water leakage during use Opening the drum door N Always make sure that the drum is stationary before reaching into the machine to remove laundry Reaching into a moving drum is extremely dangerous m Remove the drain filter completely m Clean it thoroughly m Use a spoon handle to pull the emergency release downwards see arrow The drum door will open m Remove any foreign objects e g buttons coins etc and fluff from the filer housing Turn the impeller by hand to check that it rotates freely m Put the drain filter back in place and secure 38 Problem solving guide Machines with a dump valve Opening the drum door N Always make sure that the drum is stationary before reaching into the machine to remove laundry Reaching into a moving drum is extremely dangerous m Push the emergency drain lever downwards see illustration and hold until no more water runs out m Use a spoon handle to pull the emergency release downwards see arrow The drum door will open 39 Problem solving guide Changing the lamp for the drum lighting The machine will operate with no lighting in place or if the lighting is faulty m Open the drum door m Now disco
Download Pdf Manuals
Related Search