3M Scotch-Weld PUR Appl Installation Guide
Contents
1. 3M Important Safety Instructions Scotch Weld Replacement Part Awarnine Disconnect air and electrical power and make sure applicator has 4 cooled to room temperature before servicing Failure to follow the nstallation Guide procedure may cause electrical shock or burns Part Description Awarnine WIRESTAND Do not clean or remove 3M Scotch Weld Polyurethane Reactive Adhesive with heat flame or solvent May cause hazardous vapors or fire For additional health and safety information see product label Product ID Stock No and Material Data Sheet for Scotch Weld Adhesive used 62 9895 0033 5 seu Awarnina 3M Scotch Weld Polyurethane SA KAE AE iea aa a iea Reactive Adhesive Applicator REMOVING OLD WIRESTAND REMOVING OLD WIRESTAND 1 Pull one side of the wirestand out of its 2 Turn the applicator over and pull the pivot hole A and allow it to spring other side of the wirestand out of the down into the recessed area B other pivot hole and over the edge of the applicator The wirestand should now be able to be removed entirely NOTE If you attempt to pull the end completely out in Step 1 binding may occur on the other side For best results use this two step procedure to reduce possible damage to wirestand or applicator Refer to 3M Scotch Weld Polyurethane Reactive Adhesive Applicator User s Manual for more information IMPORTANT NO2. TICE 3M MAKES NO WARRANTIES EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE User is responsible for determining whether the 3M product is fit for a particular purpose and suitable for user s method of application LIMITATION OF REMEDIES AND LIABILITY If the 3M product is proved to be defective THE EXCLUSIVE REMEDY AT 3M S OPTION SHALL BE TO REFUND THE PURCHASE PRICE OF OR TO REPAIR OR REPLACE THE DEFECTIVE 3M PRODUCT 3M shall not otherwise be liable for loss or damages whether direct indirect special incidental or consequential regardless of the l I th ted including but not limited to INSTALLING NEW WIRESTAND INSTALLING NEW WIRESTAND INSTALLING NEW WIRESTAND Caia neligencs eran or strict liability 3 Hold the wirestand so the rounded part 4 Pull the other end of the wirestand just 5 Pull the first end of the wirestand C curves away from the applicator enough to go over the edge of the from Step 3 out of the recess and and temporarily hook one end of the applicator and position it into the pivot position it over its pivot hole wirestand so the end rests down in the hole A The spring action of the wirestand will 3M bottom of recess B as shown The spring action of the wirestand will pull itself down into place pull itself down into place Industria Business Industrial Adhesives and Tapes Division 3M Center Buil
3. ding 220 5E 06 St Paul MN 55144 1000 Printed in U S A 3M 2005 78 6900 7034 3 1 05
Download Pdf Manuals
Related Search