Home

Users Manual - JES Hardware Solutions

Contents

1. Local User e type mio EE Share Password Confirm Password Ok Cancel 5 Now users have to enter the share password if they try to access the share via Network Neighborhood under Windows User Level Security control for Windows users SMB CIFS protocol 1 Go to Network Settings Windows of the Administration Page Check the check box of Enable Microsoft Network 2 Select User Level Security under the Security Policy item Click the Apply button 3 FISC CDH can authenticate users by the user accounts stored in its local user database or the PDC server on LAN 4 To add users to the local user database go to User 25 User Manager Manager Local User Click the Add User button On the Add New User dialog window enter user name password and click the Add button PATH User Manager Local User Bl E A S HETE Local User Remote User LOCAL USERIGROUP e ADD USER HFS Host UU ER GROUP LIST ADD GROUP DELETE PROPERTIES Add New User User name Password Confirm password I Grant Admin Enable Add Close Repeat the previous step if you want to add more user accounts to the local user database Click the Close button when you are done Assign users to the permission list of a share Go to Share Manager Share List Click the Set button in the Security column of the share that you
2. CD Record to burn record a CD R RW disc from a mirrored image CD Volume either a CD DVD disc existing in a CD DVD device or a CD DVD image on a hard disk File Volume a file partition on a hard disk drive Files Device a hard disk configured for file reading and writing UC Cable a cable designed for carrying IC signals I C is a serial signal standard Local User Database user accounts kept in FISC CDH locally Mirror Device a hard disk drive configured for storing CD DVD images for reading purpose or recording Share a representation of a CD volume or a file volume when it is shared to network users Share Volume Name name of a shared volume or a grouping share known to network users UTP Cable Unshielded Twisted Cable used to transmit signals in Fast Ethernet network environment Volume Label label name of a CD DVD disc or file partition 71 Appendix B Hardware Specifications B 1 Main Board Jumpers And Connectors DIMM RTC a J18 J2 J3 J7 J8 Flash ROM 5530 17 J5 E Flash ROM SDRAM SDRA SDRAM SDRAM J12 J14 J15 21143 GXm 6698 J16 J2 J5 for engineering purposes J3 IC connector J7 J8 J14 J15 IDE connectors J1
3. C CD Record GG CD Restore Restore Options Restore Target First level folder Restore Options Doc Center 3338 5120MB e Always skip existing files Do not overwrite newer files C Always overwrite existing files Apply Cancel 3 5 Limiting User Access To CD Volumes For security reasons administrators can limit user access on FISC CDH For Windows Macintosh and web users either share or user level security applies For NetWare and NFS users user level security is supported Share Level Security control for Windows users SMB CIFS protocol 1 Go to Network Settings Windows of the Administration Page Make sure that the check box of Enable Microsoft Network is checked 2 Select Share Level Security under the Security Policy item Click the Apply button 3 Go to Share Manager Share List Click the Set button in the Security column of the share that you would like to limit user access 24 Share Manager PATH Share Manager Share List Bel k Al e Share Name Share Type Not Share Security Share a Volume ed05001 Volume m ES Group Volumes CACHE System Set Volume List MIRROR System oa CDROM System Set SYS System Set 4 On the Share Password page set the share password Click the OK button Share Manager PATH Share Manager Share List Set cd05001 Share Password fi T A Share Password
4. User accounts are stored either in the local user database or in a bindery server Also note that you must assign user access rights for each share If you want to add a local user account go to the User Manager page on the Administration Page and click the Local User button on the left If you want to authenticate by a bindery server check the Authenticated By Bindery Server check box on the above page enter the name of the bindery server username and password for logging on to that bindery server After the FISC CDH is configured install the appropriate protocols and clients for your platform The network components to be installed are somewhat different on different operation systems For example you should installed IPX SPX Compatible Protocol and Client for NetWare Networks in Windows 98 to access NetWare servers Please refer to NetWare documentation for detailed information 41 Please note that in the NetWare network environment there must be at least one NetWare server other than the FISC CDH on the LAN 5 4 1 1 Network Neighborhood under Windows Open Entire Network in Network Neighborhood Find and double click the FISC CDH server It will prompt for a user name and a password Enter the user name and password in either the local user database or the bindery server for authentication Once authenticated all shared folders of the server will appear You can now enter those folders of which you have access
5. CDH 19 CD Settings Operation Mode DMA Mode 2 Function Direct Access Model Name YAMAHA CRW2216E Device Location Channel 4 Master Volume Name CD Volume Label IDE CDO7 User defined Name cd07 Function Direct Access CD Mirror C CD Record Apply Cancel 4 Select Share Manager from the Administration Page Click Share a Volume Share Manager PATH Share Manager Share a Volume 7 SS al e Share List Volume Name Volume Type Share Enable Group Volumes Volume List 5 Click the Share Enable check box of the CD DVD It takes effect immediately Now the CD DVD is shared under the root directory of the server and can be assigned access rights 3 3 CD Image Sharing If the FISC CDH is equipped with hard drives it can duplicate CD DVD discs into its hard drives in the form of CD DVD images and share them as actual CD DVD discs To make a CD DVD image please follow the steps 1 Configure a hard drive as a mirror device for storing mirrored images Go to Device Manager of the Administration Page and click a hard drive name 2 On the HD Settings page click the HD Initialize button to the left 20 Device List PATH Device Manager Device List HD Initialize al Ei al ei HD Settings HD Initialize HD Initialize The data in the hard drive will be lost permanently Do you really want to initialize it Please select
6. Introduction 1 1 CD Server and File Server Built In One FISC CDH is a versatile NAS Network Attached Storage server performing both CD and file sharing with multiple data security designs It is the only NAS server on the market able to host all sorts of data files and CD DVD information Unrivaled Storage Power Equipped with four independent UDMA 100 IDE channels the FISC CDH enables extraordinarily high efficiency of data processing Its four powerful EIDE channels allow the FISC CDH controller to host eight CD DVD devices or ATA 100 hard drives depending on your task requirements FISC CDH gives you the flexibility you need to share a large quantity of CD information Empowered by super high speed CD caching and mirroring functions you can benefit from the smooth and immediate CD sharing FISC CDH supports almost all CD formats such as music CD CDR VCD and DVD Utilizing FISC CDH to store data files is a pleasant experience just like using a quality file server FISC CDH provides you with full function file management such as file opening duplicating backup and RAID In addition FISC CDH gives you hundreds of GB space with 1 000 volume storage capacity while allowing the co existence of CD DVD information and data files Invulnerable Data Safety and Security FISC CDH features a shutdown protection circuit that coordinates the ATX power system to protect your data When receiving your shutdown command FISC CDH au
7. Remore Launch Schedule C Immediately According to schedule C daily weekly C monthly Time hour minute foo foo Day of Week Date Ps DN Apply Cancel 8 3 Restore Volumes k p To restore the data on the tape to the FISC CDH click the Restore Volumes button on the left of the Backup page 8 3 1 Restore file volumes If the tape contains files volumes the page will be like the picture below The default setting is to restore the volumes to their original locations Choose the volumes to be restored in the left sub window and click the Add gt button Last click the Begin Restore button 61 Restore Volumes Source Device ftapeo3 v Tape Type file tape Tape Label 39E8457B 001 Target Path Original C Alternative Volume Name Restore Volumes List lt Remore Restore Volumes List tape03 F5003 M tape03 F5001 Begin Restore Cancel To restore the volume to a location other than the original one click the Alternative button You will see a page as below On this page choose the volume to be restored in the Source Volume field Choose the volume to restore to in the Target Volume field Last click the Begin Restore button Restore Volumes Source Device tape03 v Tape Type file tape Tape Label 39EB4576 001 Target Path Original Alternative Source Volume tapeos F5001 z Target Volume hd05 F5004904
8. an identical CD image It will copy the CD DVD image anyway ii Manual Mode lets the user to choose which disk volume to store the CD DVD image iv Replace Mode lets the user to choose the existing CD DVD image to be overwritten by the next inserted CD DVD disc 7 Insert a CD DVD disc into the CD DVD device 22 3 4 BD you configured as the CD Mirror source to start a mirroring job If the mirroring is successful a CD volume will appear in Share Manager Share a Volume Click the Share Enable check box of the mirrored CD DVD image to share it to network users Copying CD into a File Volume CD Mirror is used to copy a CD in the form of CD images The CD images are stored in a Mirror Device which is always read only Whereas the CD Restore function is used to copy a CD file by file to a file volume To make a CD device as a CD Restore device Go to the Device Manager of the Administration Page Click a CD name to enter the CD Settings page Click CD Restore If you want to copy the CD to a folder in the file volume please specify the folder name in the First Level Folder field Otherwise you can leave it blank Specify whether to overwrite files in Restore Options And click the Apply button 23 CD Settings Operation Mode Function Model Name Device Location UDMA Mode 2 CD Record RICOH CD R RW MP7200A Channel 1 Master Function C Direct Access CD Mirror
9. attached to them correctly 3 Check the IDE cables going to all the drives to make sure that you have lined up the red edge to PIN 1 of each device Usually PIN 1 of the connector is next to the drive s power connector 5 Make sure that all the drives are properly physically secured in their exact position Make sure there are no loose wires in the chassis that may interfere with the fans in the chassis 2 3 Configuring FISC CDH 2 3 1 Setting the IP address by means of the LCD panel The FISC CDH is equipped with a LCD panel for simple configuration and displaying system information The default IP address is 192 168 1 1 If you want to assign a different IP address manually the LCD panel is an easy way of doing it If you want to get an IP address automatically via DHCP BOOTP or RARP protocols please refer to page 17 Getting the IP address automatically The following steps describe how to configure fundamental parameters through the LCD panel 1 Turn on the power The LCD panel will display System Ready after the POST power on self test System Ready 2 Press the right button The LCD will display Enter Config as shown below Press the middle button to enter the config mode for setting IP address subnet mask gateway 11 IP address etc Enter Config L 3 Inthe config mode there is a cursor on the LCD screen Press the left or right butt
10. hard drives Data together with the parity bits are striped across the hard drives It is a tradeoff between fault tolerance and storage cost RAID 5 can operate normally with one hard drive corrupted but only have the capacity of N 1 hard drives where N is the number of hard drives being grouped 7 2 Adding a RAID Group And Ungrouping It The first thing to do is to assign several hard drives as a RAID group After being grouped RAID acts like a normal hard drive You can initial it as either a mirror device or a file device A file device must be partitioned so that it can store data Below is an example of two RAID groups The first RAID group contains 3 hard drives the second contains 2 hard drives 53 Device Manager PATH Device Manager Device List 7 II a 4 al el Config rain CD name Location Function Lock Enable cd06 CH3 Slave Mirror a Vv HD name Location Function Free space Total space GE CH4 Master Mirror Drive 26847MB 28629MB RAID name Group Members Function Free Space Total Space RAID A bg hg bd Mirror Drive No Need 488MB 104219MB RAID B hd01 hdO8 File Drive 11452MB 26054MB TAPE name Location Function Refresh Free space Total space To add or delete RAID groups please go to the Administration Page and enter Device Manager Click the Config RAID button to the left You should see the page below This page lists all
11. hd03 CH2 master File Drive 1024MB 28629MB hd05 CH3 master Mirror Drive 17192MB 19470MB Refresh To use cd08 to record a CD R RW disc please follow the next steps 1 Click the hyperlink cd08 to enter the CD Settings page Please select CD Record as the Function setting 50 CD Settings Operation Mode DMA Mode 2 Function CD Record Model Name MATSHITA CD RW CW 75B85 Device Location Channel 3 Master Function C Direct Access C CD Mirror CD Record Record Setting Source Tiras Backup 614MB Speed E D Number of Copies fi Launch Schedule e Immediately N According to schedule Date J02 20 2001 Time 0 41 40 Options I Erase CD RW disc before recording Apply Cancel 2 Inthe Record Setting section select one or more mirrored images in the Source sub window Multiple selection are permitted 3 Select Speed If the selected speed is higher than the capability of the CD R RW device the FISC CDH will change the speed automatically 4 Specify Number of Copies if you want burn the image onto several CD R discs Then choose one of the Launch Schedule items Options Erase CD RW disc before recording if this check box is checked the inserted CD RW disc will be quickly before actually going on the recording process Click now the Apply button If you set a Launch Schedule later than the current time the screen will show the
12. rights It will prompt for user name and password if required I File Edit View Go Favorites Help Ea e 5 pap XY ABJOIXEE Address PM5 CDH CACHE POOL CDROM POOL CI MIRROR MIRROR POOL G sys SYSTEM INFORMATION For example you can write to F2001 if it is a file volume of which you have full control access right please see p 32 Limiting User Access To File Volumes for information about assigning access rights Using the FISC CDH Under Windows NT 2000 The way to use the FISC CDH under Windows NT 4 0 2000 is similar as in a Windows 95 98 environment Double click Network Neighborhood on Desktop Find and double click the FISC CDH server All shared folders of the server will appear 40 5 4 Using the FISC CDH Under NetWare clients First of all enable the NetWare support of the FISC CDH by checking the Enable NetWare Network check box and subsequently click Apply You can also change the FISC CDH s server name used under the NetWare network environment PATH Network Settings NetWare Bel Kal A 2 Windows IV Enable Netware Network Macintosh Server Name NCPD8FF8508 SREE Security Mode s I Authenticated by Bindery Server UNIX e Bindery server JBINDERY Login Narne Login Password p Apply Cancel Only user level security is available under NetWare You must have a user account to log on to the FISC CDH and thus be able to access its content
13. the function of hard drive C Nolnit Mirror Device C Files Device OK 3 On the HD Initialize page select Mirror Device and click the OK button 4 To set a CD DVD device as a mirroring source go to Device Manager of the Administration Page and click the CD DVD device 5 Select CD Mirror as the Function setting Mirror Options will appear immediately next to the Function setting Specify the options properly 21 CD Settings Operation Mode Function Model Name Device Location UDMA Mode 2 Mirror ATAPI CDROM Channel 2 Master Volume Name CD Volume Label C User defined Name cd0003 IDE_CDO3 Function C Direct Access CD Mirror C CD Restore Mirror Options Launch Target Mirror Options Launch Schedule Auto amp Smart mode avoid redundancy C Auto amp Force mode allow redundancy Manual mode Hard drive for mirraring fDrive 5 gt Replace Mode Existing image to be replaced 3D CANVAS z Immediately According to schedule Date 99 07 2002 Time 1 7 36 58 IV Eject CD when mirror is completed I Delete the mirrored image when CD is ejected I Share the image when mirror is completed Apply Cancel 6 Specify Launch Target i Auto amp Smart checks if the CD DVD image already exists when copying CD DVD image It will skip if an identical CD DVD image already exists ii Auto amp Force do not check if there exists
14. 1 CONNECTINGTHEEISCCDH 3 2 2 INSTALLING THE RACK MOUNT MoODELS 5 2 3 CONFIGURING FISC CDR 11 2 4 FIRMWARE UpORADE 13 2 5 EVENT NOTIFICATION oreet aaa dieS 14 2 6 MULTI LANGUAGE SUPPORT esersvsvvnvvrnvnnnsnvsssnvvrrnnnesssssnee 15 CHAPTER3 CONFIGURING THE CD DVD SERVER FUNCTIONS 17 3 1 CONFIGURING NETWORK SETTINGS 17 3 2 DIRECT CD ACCESSING erovvvvrvvnnnrnvsssrnvvrrnnnnsnvsrsnnvvrrnnsersssnnne 19 3 3 CD IMAGE SHARING eeoovovvvvvnrnvensnnvnrvnnnernversnnnnrvnnnesevsnsnnnnrven 20 3 4 COPYING CD INTO A FILE VOLUME 23 3 5 LIMITING USER AccCEsgfioCDNOLUMES 24 3 6 USER LICENSE CONTROL 27 3 7 RENAMING THE CD DVD roroveversrsvsrsvvrvnrvernversssvnrvenesersnnne 28 3 8 MIRROR PASSWORD ccccessesccccceceesesseesescescecsessassescesens 29 CHAPTER4 CONFIGURING THE FILE SERVER FUNCTIONS 30 4 1 INITIALIZING A HD FOR FILE SHARING eevsvovnnnnnvenensvrrnvenner 30 4 2 CREATING PARTITION S AND SHARING FILE VOLUMES 30 4 3 LIMITING USER ACCESS TO FILE VOLUMES ssseseeeseeeeeeen 32 4 4 RENAMING VOLUME LABEL AND VOLUME NAME 35 CHAPTER5 ACCESSING FROM DIFFERENT CLIENTS 37 5 1 ACCESSING THROUGH WEB BROWSERS 37 5 2 USING THE FISC CDH UNDER WINDOWS 95 98 1 00 cceee 39 5 3 USING THE FISC CDH UNDER WINDOWS NT 2000 40 5 4 USING THE FISC CDH UNDER NETWARE CLIENTG Al 5 5 USING THE FISC CDH UNDER MaCOR 43 5 6 USING THE FISC CDH UNDER NFS CLIENT 45 5 7 ACCESSING THE FISC CDH USING FTP e
15. 2 power connector J13 TP RJ 45 connector J17 J18 LED connectors For the power LED of the tower case to work the power LED cable has to be connected to Pin 1 and Pin 2 of the J17 connector Pin 2 is the power source J17 Function Pin 1 Power LED Pin 2 VCC B 2 Power Control Board Daughter Board Switches S2 S1 J2 72 DIP switch Recovery mode MFG mode 2 1 Down Up 82 2 Up Down Button Pushed OFF 1 Reset system Normal The DIP switches S2 1 and 82 2 are mainly for manufacturing and engineering purposes Press the S1 button to reset the server immediately B 3 LED Indicators I et Activity Link Fault TE KR Green Yellow Power Fault LED The power LED indicator green informs that the server power status is ON The power LED will flash when booting up the FISC CDH After the FISC CDH has mounted all the devices the power LED will keep the ON status The fault LED yellow indicates any system fault 73 10 100 Mbps Link Speed LED Indicates the network speed is 100Mbps green or 10Mbps yellow LAN Activity LED Indicates any network activity IDE Activity LED Indicates any IDE channel s activity B 4 LED Codes Status Power Fault LED 10 100 Mb Link LED POWER ON green off POWER ON SELF TEST POST flash green off POST ERROR Memory Error
16. 5 5 1 Accessing through Chooser The following example describes how to access the FISC CDH via Chooser of MacOS 8 6 1 Run Chooser and click AppleShare 43 Oo Chooser H Select a file server AFPDBFF8508 AppleShare Color Sw 1500 Color Sw 2500 Color SW Pro AppleTalk Zones p Server IP Address Active Inactive 7 6 2 AppleTalk 2 Select a zone out of the AppleTalk Zones pane Select a server and click OK E Connect to the file server AFPD8FF8508 as Guest Registered User Change Password 3 8 4 3 Click Connect A dialog box as below will pop up LR AFPD8FF8508 Select the items you want to use CACHE on AFPD8FF8508 cd03 on AFPD8FF8508 CDROM on AFPD8FF8508 F2001 on AFPD8FF8508 Checked items will be opened at system startup time 3 8 4 4 Select a share item and click OK A network folder will appear on Desktop Then you can read or write to the folder depending on your access right 44 5 5 2 Accessing through Network Browser The following example describes how to access the FISC CDH via the Network Browser of MacOS 8 6 1 Run Network Browser It will display all zones O 4 Network SS DI E 2 Click the zone where the FISC CDH is located Double click the server A window will pop up to display the content of the
17. Begin Restore Cancel Behavior All files in the source volume will be copied to the target volume Files with the same name will be overwritten 8 3 2 Restore mirror volumes If the tape stores mirror volumes the page will be like the picture below 62 Restore Volumes Source Device ftapeo4 v Tape Type mirror tape Tape Label 39ED6B7E 001 Volume Name Restore Volumes List Restore Volumes List tape04 MBOL9 Target Device bam v Restore options I Skip the volume s which already exists on the target device Begin Restore Cancel First choose the volumes to be restored in the left sub window Click the Add gt button They will appear in the right sub window Next select a hard drive the data being restored to in the Target Drive list box Last click the Begin Restore button 63 Chapter 9 Archive The FISC CDH supports both Tape Backup and Data Archiving It is important to understand the difference between them A backup keeps a snapshot of the hard disk or network volume If the working copy of an important file is lost then in the worst case one can go back to the backup version usually stored in tape and retrieve the file Note that the frequency of the backup will determine how useful the backup copy is For example backing up on a daily basis is a good approach if you are frequently changing the content of the hard disk or network volume An archive st
18. Document Number 105 01 0001 Revision History Revision Date Author Description AO 2002 2 19 Leo Chan FISC CDH English User s Guide Henry Ho v4 10 Al 2002 8 7 Henry FISC CDH English User s Guide v4 20 FISC CDH Versatile Network Attached Storage Server User s Guide Version 4 20 Part Number 5019 14016 Important Notice Trademarks FISC CDH and Ingrasys are trademarks of Ingrasys Technology Inc Microsoft is a registered trademark DOS Windows 95 Windows 98 and Windows NT are the registered trademarks of Microsoft Corporation NetWare is the registered trademarks of Novell Inc Macintosh and AppleShare are the registered trademarks of Apple Computer Inc All other company and product names are trademarks of their respective owners Licensing No part of this publication may be reproduced transmitted transcribed stored in a retrieval system or translated into any languages in any forms or by any means without prior written permission from Ingrasys Technology Inc The Embedded Software included with the product is composed of multiple separately written and copyrighted modular software programs Various Embedded Software programs the Public Software are copyrighted and made available under the GNU General Public License or other licenses that permit copying modification and redistribution of source code which licenses are referred to as Public Licenses The Public Softw
19. E 5 and choose Internet Options From the pop up dialog box click the Languages button close to the bottom You will see Language Preference gt Some Web sites offer content in multiple languages You can choose several languages below they will be treated in order of priority Language Move Up BYE Up Move Down Remove Add Menus and dialog boxes are currently displayed in English United States Dag Cancel From the dialog box click the Add button and choose a language that you want to use like French France fr Select this item and use the Move Up button to move it to the top position Click the OK button to return to the browser Click the F5 key to refresh the window You will see the Administration Page in French 15 2 6 2 Code page selection To make the FISC CDH operate more smoothly under the OS platform other than English it is suggested to adjust the code page according to different OS platforms To change the code page setting go to the Administration Page and enter the Server Settings page Click the Others button on the left Server Settings PATH Server Settings Others G Al Al e TimeDate IV Apply volume settings automatically if HD is changed hwsetings Mount sequence ISO gt HFS gt UDF x Event Log Setting Codepage cP950 Chinese BIGS e CP437 DOSLatinUS Password CP850 DOSLatin1 Mac Roman FMW Upgr
20. IV Enable Microsoft Network NetWare Macintosh Server Name RYAN1 18 Web DomainAWorkgroup JALLIONRD Protocol s UNIX NetBEUI NetBIOS over TCP IP Both He Security Policy Share Level Security C User Level Security I Authenticated by PDC Apply Advance Cancel LA Enter the server and domain workgroup names These names specify what the users see from Network Neighborhood under Windows 4 Under the Protocol s item select Both if you are not sure which one to select 5 Select a security policy between Share Level Security and User Level Security The default setting is Share Level Security 6 Click the Apply button 3 1 2 Getting the IP address automatically In addition to assigning an IP address manually FISC CDH can use some standard protocols to get an IP address automatically To enable this function please go to the Administration Page and select Network Settings TCP IP Select the item Obtain an IP address automatically and choose which protocol s to use Click the Apply button to confirm and apply the changes There must be an active DHCP server on the LAN if FISC CDH is using the DHCP protocol to get an IP address It is the same for BOOTP and RARP Network Settings PATH Network Settings TCP IP SS fu B Al el See Windows Obtain an IP address automatically Netware DHCP C BOOTP I RARP Macintosh C Assign an IP address manual
21. RAID groups and their configuration Device Manager PATH Device Manager Config RAID E Al Al Device List Config RAID Current RAID Group s RAID name RAID Level Group Members Total Space Ungroup RAID A D hd02 hd03 hdO4 104219MB L RAID B 1 hd01 hd08 26054MB SN Add a RAID Group RAID Level og Available HD s RAID Group Members HD List RAID List Add gt lt Remove Setup Cancel Close To add a RAID group first choose its RAID level Next choose its RAID group members in the left sub window Available HD s and click the Add gt button Only those hard drives with no init status not initialized yet will appear in the Available HD s sub window Last click the Setup button to create a RAID group 54 7 3 7 4 7 4 1 To ungroup a RAID click the Ungroup check box of the RAID to be dismissed It will prompt for confirmation NOTE that all data in the RAID group will vanish when the RAID is ungrouped Its RAID group members will become separate hard drives with no init status and appear in the device list after being ungrouped Initializing RAID Once created a RAID group must be initialized as either a file device or a mirror device for operation To initialize a RAID group go to the Administration Page and enter Device Manager Click the hyperlink of the RAID name that designates the RAID gro
22. SS 8 E 3 9 aes oe a Legend We Filtered using the modified time of files AL Filtered using the file archive bits S Filtered using the free space C Clear archive bits of files br Delete source files B Bum CD DVD immediately x Substitute only x Substitute and delete Es Delete the image after burning successfully Refresh 9 2 Adding archive task To add an archive task go to the Administration Page and enter Archive page Click the Add Task button The following page will be shown This page contains all the parameters that need to be configured for FISC CDH to perform the archiving task in a proper way Archive PATH Archive Add Task Gal Ki a E Task List Add Task Add Task Task 2 C Source Image None v Source File Volume None v First level folder Build Image to Auto Volume Label faso up to 20 characters Volume Label Extension None Date Volume Name As the volume label Specified as Image Substitution None X Filter Options T Include only the files with modified time later than 4j xl land earlier than HA HA T Include only the files with archive bits set I When the free space is less than j MB Miscellaneous I Clear archive bits of source files after archived I Delete source files after being archived I Bum CD DVD immediately after the image s are built Set Schedule 9 3 First select the volume ne
23. Tool Bar IV Default page IV Search Server IV Change Password IV External Link External Link Label External Link External Link URL fhttp www allion com Apply Cancel Next un check the Enable User Access from Web check box and click the Apply button 5 2 Using the FISC CDH Under Windows 95 98 From the user side FISC CDH servers act like any computer or server on LAN To use FISC CDH in Windows 95 98 first make sure that Windows Network support of FISC CDH is enabled To do so go to Network Settings on the Administration page and click Windows Make sure that the Enable Microsoft Network check box is checked Click the Apply button if you make any changes Network Settings PATH Network Settings Windows G Bl al e Windows W Enable Microsoft Network NetWare Server Name CDH Macintosh Domain Workgroup PM Web Protocol s UNIX C NetBEUI C NetBIOS over TCP IP Both Security Policy Share Level Security User Level Security IV Authenticated by PDC Apply Advance Cancel 5 2 1 5 3 Reading and writing from to the FISC CDH First make sure that the TCP IP protocol is installed under Windows Next start Windows Explorer or Network Neighborhood The FISC CDH appears as a computer icon in its workgroup Double click the icon representing the FISC CDH You will find all the shared folders in the FISC CDH You can access any folders if you have the access
24. a in that tape will be overwritten and lost Incremental backup has not been implemented yet 8 1 Getting Task Status To see whether the FISC CDH has any backup or restore tasks go to the Backup page of the Administration Page You will see the View Status page Device Name means the name of the tape drive Tape Label means the label of the tape inserted in the tape drive All backup or restore tasks are shown below PATH Backup View Status P Gl i al e view status View Status Restore Volumes Tape Label 39EEBAEB 001 Scheduled Task None no action Backup Volumes Device Name tapel4 The FISC CDH also keeps the event logs relating to backup or restore tasks To see the log go to Administration Page and enter the Event Log page Backup events are kept in the Device Log Here is an example Event Log 8 2 Backup Volumes PATH Event Log Devices Log Gl S Bl a e EE Devices Log BR DER Date Time Level Event Information Security Log Mirror Log 1049 2000 10 10 23 Info tape04 Tape inserted 1049 2000 10 10 20 Info tape04 Backup ok 1049 2000 10 07 43 Info tape04 Backing up the volume F8007 1019 2000 10 07 43 Info tape04 Need to backup 1 file volume s 1049 2000 10 07 01 Info tape04 Backup begin 1049 2000 10 07 01 Info tape04 Daily backup schedule launched 1049 2000 10 03 56 Info tape04 Tape inserted 1048 2000 20 52 58 Info tape04 Restor
25. ade CP950 Chinese BIGS GB2312 80 Set Default CP932 Shift JIS CP949 Unified Hangul On this page please select a code page and click the Apply button Below is for your reference CP437 DOSLatinUS for English OS CP850 DOSLatinl for OS of west European languages Mac Roman for Mac OS CP950 Chinese BIG5 for Traditional Chinese OS CP936 Chinese GB for Simplified Chinese OS CP932 Shift JIS for Japanese OS CP949 Unified Hangul for Korean OS 16 Chapter 3 Configuring The CD DVD Server Functions After performing the basic installation described in the previous chapter you can go on for further configuration if necessary This chapter describes the basics and steps of how to configure and use FISC CDH as a CD DVD server 3 1 Configuring Network Settings 3 1 1 Enabling the network protocol support FISC CDH works perfectly in a heterogeneous network environment It supports user access from different operating systems The following steps describe how to configure the network settings for Windows users Steps for other network protocols are similar 1 Please go to the Administration Page and click Network Settings To the left side of the page are the buttons TCP IP Windows NetWare Macintosh Web and UNIX 2 Click the Windows button Make sure that the check box besides Enable Microsoft Network is checked default setting Network Settings PATH Network Settings Windows z EISE
26. ailable 5 GB Select Partition Size GB fi GB e Default Name C Volume Name Volume Label Ok 3 Repeat step 2 if you want to create more partitions Now go to the Share Manager page of the Administration Page Click the Share a Volume button on the left You can see that the Share Enable check box of the just created file volume is checked Share Manager PATH Share Manager Share a Volume 2 a el Volume Name Volume Type Share Enable Group volumes DE CDO1 CD title r Volume List cd03 CD title RS EMAIL Mirrored image RS F7011 File mode Vv 4 3 Limiting User Access To File Volumes For security reasons administrators can limit the user access for each CD file volume The security controls for different network protocols are different For Windows Macintosh and web clients both share and user level security are supported For NetWare and NFS users only user level security is supported The security controls for different network protocols are independent Let us take Windows as an example Steps for other protocols are similar Share Level Security control for Windows users SMB CIFS protocol 1 Go to the Network Settings page on the Administration Page and click the Windows button Make sure that the check box of Enable Microsoft Network is checked default setting 2 Select Share Level Security under the Security Policy item Click the Appl
27. al el View Setting FAW Upgrade Timeme Ensure that a proper firmware upgrade file is specified HAW Setting Press the Upgrade button to start to upgrade firmware Event Log Setting Upgrade File Browse Password Upgrade ess Set Default Reset Shutdown Others 1 Go to the Server Settings on the Administration Page 2 Click the F W Upgrade button on the left 3 Input the full path name of the firmware image BIN file in the Upgrade File field or use the Browse button to find the location of the firmware image file 4 Last click the Upgrade button to begin to upgrade the firmware It will reboot the FISC CDH after the upgrade is completed 2 5 Event Notification The FISC CDH can notify the user of system events via event logs LCD panel and buzzer in the FISC CDH controller and or email To configure the settings related to the system event notification please go to Server Settings on the Administration Page and click the Event Log Setting button Server Settings PATH Server Settings Event Log Setting E 7 al View Setting Event Log Setting mente File log level into Le ue log level fino Buzzer log level Disable Password Mail log level warning SE SMTP sener iP fo fe pp SA Admin email address fadmin hotmailcom Fe EH SS Shutdown Others To configure which level of messages will display on the LCD
28. are is licensed pursuant to i the terms of the applicable Public License located in the related software source code file s and or in its online documentation and ii to the extent allowable under the applicable Public License The source code of the Public Software can be requested from Ingrasys Technology Inc All other Embedded Software programs and Utilities Software are copyrighted by Ingrasys You may not copy modify sell lease sublease or otherwise transfer these software programs or any copy or modification in whole or in part Disclaimer Ingrasys makes no representations or warranties with respect to the contents of this publication and specifically disclaims any implied warranties merchantability or fitness for any particular purpose Ingrasys reserves the right to revise this publication without notice Copyright 2002 Ingrasys Technology Inc All rights reserved First Edition August 2000 Updated in August 2002 Printed in Taiwan Electronic Emission Notice Federal Communications Commission FCC This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment C CE Notice This device complies with the EMC directive of the European Community and meets or exceeds the following technica
29. ctory You can see all shares but you can only enter those of which you have access rights For example assume that the FISC CDH server has an IP address of 192 168 1 2 and the user gary was given access right to the share abc His user password is 123 We use the FTP command under DOS prompt C gt ftp 192 168 1 2 Connected to 192 168 1 2 220 FISCCDH FTP server ready User 192 168 1 2 none gary 331 Password required for gary Password 123 230 User 123 logged in ftp gt pwd 257 is current directory ftp gt ls 200 PORT command successful 150 Opening ASC mode data connection for file list abc CACHE CDROM MIRROR SYS 226 Transfer complete ftp 114 bytes received in 0 0065 Seconds 1 90Kbytes sec ftp gt 49 Chapter 6 Recording CDs With a supported CD R RW device attached the FISC CDH can record mirrored images into CD R RW discs 6 1 Recording Mirrored Image Onto CD R RW Disc If connected with a supported CD R RW device the FISC CDH can record burn a mirrored image onto a CD R or CD RW disc By default a CD R RW device functions as a CD Record device such as the cd08 device shown below Device Manager PATH Device Manager Device List 7 B Bal e CD name Location Function Lock Enable cd02 CH1 slave Direct Access B Vv cd08 CH4 slave CD Record r Vv HD name Location Function Free space Total space
30. e ok 1048 2000 20 52 36 Info Mount MIRROR volume MBO19001 ok 1048 2000 20 52 12 Info tape04 Restoring to the volume MB019001 1048 2000 20 51 54 Info tape04 Need to restore 1 mirror volume s 1048 2000 20 51 54 Info tapeO4 Restore begin 1018 2000 20 51 12 Info tape04 Tape inserted 1048 2000 20 51 09 Info tape04 Backup ok 10M8 2000 20 47 39 Info tape04 Backing up the volume SEAGATE 1048 2000 20 47 15 Info tape04 Backing up the volume MBO19 1048 2000 20 47 15 Warning tape04 Source volume MBO19001 missing or access failed To back up data to a tape click the Backup Volumes button on the left of the Backup page 1 Select a tape drive as the backup device in the Target Device list box 2 Choose to back up mirror volumes or file volumes in the Source Type field 3 Assign the tape label for later identification 4 Choose the volumes to be backed up in the left sub window Click the Add gt button They will appear in the right sub window and be removed from the left sub window 5 Set the backup schedule in the Launch Schedule section 6 Click the Apply button 60 Backup Volumes Target Device tape04 v Source Type Mirror Volumes File Volumes Tape Label 29EEC7F4 Volume Name Backup Volume List Backup Volume List hd08 F8009 M hd08 F8001 hd08 F8010 hd08 F8011 Add gt M hdo8 F8008 M hd08 F8007 hd08 quest hd08 F8013 hd08 F8023 lt
31. e the failed hard drive with a good one and enter the Recover page to choose this hard drive for recovering For how to recover a RAID please read the next section RAID level 5 contains 3 to 8 hard drives If one hard drive fails the RAID group is marked Degraded and needs to be recovered If two or more hard drives fail the RAID group fail For RAID recovering please read the following section 7 4 3 RAID Recovering Ifa hard drive of RAID 1 or RAID 5 group is corrupted the RAID group can still function well but provides no fault tolerance To recover a RAID group please follow the steps as below 1 Shut down the FISC CDH replace the failed hard drive with a new one and then power on the FISC CDH 2 Go to the Administration Page and enter Device Manager Click the hyperlink of the RAID name that is Degraded 56 Device Manager PATH Device Manager Device List Gl fal al el ConfigRAaD CD name Location Function Lock Enable cd05 CH3 Master Direct Access B Vv cd06 CH3 Slave Direct Access RW Vv HD name Location Function Free space Total space hd08 CH4 Slave No Init OMB OMB RAID name Group Members Function Free Space Total Space RAID A bd hd hg Mirror Drive 37355MB 39082MB RAID B hdO4 bd Mirror Drive Degraded 18677MB 19541MB TAPE name Location Function Free space Total space Refresh 3 On the page click the Rec
32. ections Local User BCE s 8 tocaruser You can limit the maximum concurrent connections to any Windows NT number between O and 65535 If set to 0 the concurrent connections of the share will be NetWare unlimited E r 3 Current Maximum Connections 0 New Maximum Connections fo Apply Cancel Enter a number for specifying how many concurrent connections are allowed to the share Then click the Apply button If you set the number to 0 the FISC CDH will set no limit on the maximum connections to that share Renaming the CD DVD To rename a CD disc or a CD image please go to the Share Manager page and select Share List Share Manager PATH Share Manager Share List fl 7 Ae ca Share a Volume Group Volumes Volume List Share Name Share Type Not Share Security cd05001 Volume LI Set CACHE System ees MIRROR System s CDROM System Ms SYS System sey HD Device Share Volume Name Volume Label A Volume Name Jaco Apply Close 28 3 8 Click the hyperlink of the share in the Share Name column to go to a dialog window Enter a new name and click the Apply button Press the Close button to go to the upper menu Mirror Password The bundled software eConsole is for remotely building and burning CD images into the storage server via the network It also has some basic server management capabil
33. ed to be archived either from the Mirror Volume or the File Volume Note that volume selected from File Volume will be initially built into a mirrored image prior to being recorded onto a CD DVD Self explanatory Filter Options are available to specify what kind of data and when the data is going to be archived Check the Burn CD DVD immediately after image s built option in the Miscellaneous field to record the archived image onto a CD DVD disc Specify the schedule to perform the data archiving task and choose the target CD DVD recorder You can split a large file into either 650MB or 4 7GB depend on the type of the media use for archive using the Split Image By option Click Apply when finished Modify Delete data archiving task To modify an archive s task click the ID number of the corresponding archiving task in the first column The detail task information such as the filter option and miscellaneous selection will be shown PATH Archive Task List Task Detail al nl ga amp Task Detail Modify Task Task 1 Source Volume Doc Center PM Build Image to Auto Volume Label old_doc Volume Label Extension None Volume Name old doc Image Substitution Substitute only Filter Options Include only the files with modified time No Include only the files with archive bits set No When the free space is less than No Miscellaneous Clear archive bits of source files after archived No Delete source files after being arch
34. ee 47 CHAPTER 6 RECORDING CDS ccccccccsssscsseccrcccsssscsecccees 50 6 1 RECORDING MIRRORED IMAGE ONTO CD R RW DISC 50 CHAPTER7 RAID CONFIGURATION ccscsscsssssssssscecees 53 7 2 ADDING A RAID GROUP AND UNGROUPING IT 00 53 7 3 INTTIALIZINGRAID a a E 55 7 4 WHAT IF HARD DRIVES Eat 55 7 5 THINGS YOU SHOULD KNOW errsvrvrvvvvrrnnnnssvssssnvvrrnnsnrsvssnee 58 CHAPTER8 TAPE BACKUP eseesessssssvnvnvesssessnsnennvnvenesessnnnnneeee 59 8 1 GETTING TASK STATUS ervvvvnrersrrssvvrvnnnernrsrsssvnrvnnnnsersssnnvnrven 59 8 2 BACKUP VOLUMES ssseesesssssssesereesssssseseressssssseecesessssssesereess 60 8 3 RESTORE VOLUMES eererrvonvrvrrvnnnrsvsssvsvvrrnnnnssvsssnvvernnsessssnnns 61 CHAPTER 9 ARCHIVE eicscssscsssaccceccsnsssesasnnesescosesessnsstessvonsaseceaes 64 9 1 TASKLTIST reelt eee 64 9 2 ADDING ARCHIVE TASK cc0c0sssseesesessessssssssessessseseseseseeees 65 9 3 MODIFY DELETE DATA ARCHIVING TASK sssessseoeosseeeeee 66 9 4 IMAGE SUBSTITUTION cccccccsccccceceesessseecesccsseessssaeseseesens 67 9 5 EXAMPLE OF USING DATA ARCHIVING errrvrvrvvvrvrvrvrvrvevrvverer 68 APPENDIX A GLOSSARY wesccscsesccsteceessdesecsccstocssssccnsescssdevsssses 71 APPENDIX B HARDWARE SPECIFICATION G cc000008 72 B 1 MAIN BOARD JUMPERS AND CONNECTORS eervrvvvvrvrrnvennen 72 B 2 POWER CONTROL BOARD DAUGHTER BOARD SWITCHES 72 B 3 LED INDIGATORS uns ped 73 BY LEDIG EI 74 vi Chapter I
35. evel folder name PM in the source file volume name Doc_Center which is later than December 31 2001 Volume Label is old_doc Set Image Substitution to Substitute only Perform archive every Friday at 10 00pm Split the large image into 650MB and burn it onto a CD R Delete source file after image of the file volume has been built Burn CD DVD immediately after images are built Following is the configure procedure l 10 11 Select the source file volume contain the design files need to be archived Note that volume selected from File Volume will be initially built into a mirrored image Enter the First level folder name PM User can let the system to determine which image drive in the system the image should be built Default is Auto Type in the volume label old_doc Assign a volume name of the archive image as the volume label Set the Image Substitution to Substitute only Set the Filter Options so that only the file later than December 31 2002 will be archived Check the Delete source files after archived options in Miscellaneous Check the Burn CD DVD immediately after the image s are built option in Miscellaneous When you set the Image Substitution to Substitute only archive task will be set to According to schedule automatically Click Weekly and set the archive task to start every Friday at 10 00pm Select a CD R device from the system Note that if available multiple CD DVD recorder can be selec
36. he chassis FISC CDH PRO 1 FISC CDH uses removable metal rails that are mounted to the drive attach the rails to both side of the drive using two screws per rail as shown 2 Then secure the drive onto the chassis as shown Make sure the drive is not free to move around when you are done 2 1 3 Connecting the hard drive onto the chassis This procedure provides instructions for installing hard disk drives into the FISC CDH system 1 FISC CDH uses removable metal box into which hard disk drives are mounted You have to remove the metal box first place the hard disk drive on the metal box and then use four screws to mount the drive on the metal box 2 Finally sliding the metal box on the chassis as shown Use two screws to mount the metal box on the chassis to ensure that it fits properly 7 f 2 2 3 Connecting the cables to the FISC CDH main board Determine which end of the interface connector is PIN 1 Hard disks usually have PIN 1 of the connector next to the drive s power connector Connect the IDE cables as indicated on the label which is located at the inner face of the top cover IDE CHANNEL 2 IDE CHANNEL 4 FEE EE IDE CHANNEL 1 IDE CHANNEL 3 mJ o P Ed N E im lt 10 2 2 4 Post assembly check procedure 1 Make sure the power switch on the power supply at the back of the chassis is ON 2 Make sure all you drives and the FISC CDH main board have a power connector
37. ht on the top column it shows the server names under Windows NetWare and MacOS respectively Path this list box provides a listing of the hierarchy of the folder you are currently browsing and allows the user to quick jump to any one of the sub directories by simply selecting a particular path name link in the list Find to search for a specific item in the current folder enter the name in the field and click the Find button The find result appears in the content page Search Server this function finds all FISC CDH servers on LAN in a pop up window as shown below Storage Server Farm Srowsing Center 192 168 11 152 f YsmeD804208E 192 168 11 135 H YsMeDEFFS4CA A192 Aar ZE H YsmBDe042445 4210 67 192 203 f coH30omHz Refresh Admin Detail Close Change Password to change a local user password for accessing the user page External Link to go to the configurable web site 5 1 2 Disabling the user access from web In case the administrator would like to prohibit users from accessing the FISC CDH via the web he can disable this function To do so go to Network Settings on the Administration Page and click Web 38 Network Settings PATH Network Settings Web R J d Ale Windows IV Enable User Access from Web NetWare Macintosh Security Policy Share Level Security C User Level Security UNIX I Authenticated by PDC Default User Page V Logo IV
38. ile would be created when Image Substitution is set to None ABC ABCO001 ABC002 most updated image Substitute only ABC most updated image ABCO001 ABC002 Substitute and delete ABC most updated image 67 9 5 Example of using data archiving Here is the scenario ACME is a graphic design house carry out business for more then 5 years Its clients spread from local small business firm to Government agency In order to maintain the Intellectual property right for all the design they have created during the past year ACME keeps all their designs in their main file server for reference Due to the nature of the graphic design that it tends to be very big in term of file size the demand of additional storage space of the file server are tremendous This situation has been improved significantly by purchasing a FISC CDH server in the network although demand of extra storage space is still exist However MIS manager in ACME found that half of the data store in the FISC CDH server are mostly being read only by looking at the log provided by the combo server Despite the fact that ACME do perform type backup for all the data store in the server retrieve a specific historical file can be a nightmare Therefore Data Archive would be the best solution for situation like this 68 9 5 1 Archive data from File Volume MIS manager from ACME have come out a data archive scheme as follow Archive all the files in the first l
39. itialize button Device List PATH Device Manager Device List HD Initialize al mm al ei HD Settings HD Initialize HD Initialize The data in the hard drive will be lost permanently Do you really want to initialize it Please select the function of hard drive C Nolnit Mirror Device C Files Device ok 3 On the HD Initialize page select File Drive and click the OK button to initialize the chosen hard drive 4 2 Creating Partition s and Sharing File Volumes To use the file sharing function of the FISC CDH you must create at least one file partition on a file device hard disk drive A file partition is also referred as a file volume A volume is a basic unit for sharing and security purpose It means only volumes can be shared to network users Network users view a volume as a folder or a directory in the root directory of the FISC CDH After a hard drive is initialized as a Files Device the HD Partition button appears just below the HD Initialize button Click the HD Partition button On the HD Partition page select the size of the partition and assign a name for it default name will be like F1001 Click the OK button Device Manager PATH Device Manager Device List e HD Partition Se sengs HD Partition mme You can create a new partition and reserve certaindisk space for it HETT The minimum size of partition is 1GB Maximum Partition Size Av
40. ity For doing any modifications on FISC CDH via eConsole one must provide a password for authentication From server management point of view there are two levels of privileges i e two kinds of passwords A person knowing the admin password can do all actions for example remote mirroring deleting CD images and changing server IP addresses With the mirror password only remote mirroring recording and optional image deletion are permitted To set the passwords mentioned above please go to the Administration Page Click into the Server Settings page Click the Password button on the left to enter the page for modifying the administrator s password Click the Mirror Password button on the left to enter the page for modifying the mirror password 29 Chapter 4 Configuring The File Server Functions FISC CDH functions as a file server and a CD server at the same time Each hard drive can be configured to contain either CD DVD images which is read only or files which can be read only or read write This chapter describes how to configure and use the file server functions 4 1 Initializing a HD for File Sharing This section describes how to prepare a HD for file sharing Prior to that if you have not enabled network protocol support refer to section 3 1 Configuring Network Settings on page 17 1 Go to Device Manager on the Administration Page and click a hard drive of your choice 2 On the page click the HD In
41. ived Yes Burn CD DVD immediately after the image s are built Yes Schedule Weekly Fri 22 00 CD DVD Recorder cd01 RICOH CD R RW MP7200A Split Image By 650MB Delete the image after burning successfully Click the Modify Task button and make changes Click Apply when finished Data archiving task can be deleted by click on the checkbox at the last column on the Task List page 9 4 Image Substitution PATH Archive Add Task Task List Add Task Image Substitution Volume Label up to 20 characters Volume Label Ext C Date Volume Name As the volume label C Speciiedas Image Substitution Nne zl Filter Options TC Include only the files with modified time later than af lit and earlier than L zl lut d I Include only the files with archive bits set I When the free space is less than F M Miscellaneous T Clear archive bits of source files after archived I Delete source files after being archived I Burn CD DVD immediately after the image s are built Set Schedule There are three options you can choose from Image Substitution None Substitute only and Substitute and delete Note that Image Substitution can only operate under two conditions 1 Volume Label Extension must be set to None 2 Archive task must be set to According to schedule Assuming the source file volume name is ABC and three consecutive archive has been done The following images f
42. l Security control for Windows users SMB CIFS protocol 1 Go to the Network Settings page on the Administration Page and click the Windows button Make sure that the check box of Enable Microsoft Network is checked default setting 2 Select User Level Security under the Security 33 Policy item Click the Apply button 3 FISC CDH can authenticate users by the user accounts stored in its local user database or the PDC server on the LAN 4 To add users to the local user database go to the User Manager page and click the Local User button on the left Then click the Add User button on that page 5 On the Add New User dialog window enter a user name and a password Then click the Add button to add a user account PATH User Manager Local User E fl BE l el SE Remote User LOCAL USER GROUP _ ADD USER NFS Host ADD GROUP DELETE PROPERTIES NSER GROUP LIST 6 Repeat the previous step if you want to add more user accounts to the local user database Click the Close button when you are done 7 Assign users to the permission list of a share Go to Share Manager Share List Click the Set button in the Security column of the share that you would like to limit user access 8 On the page click the Local User button If you want to add PDC users click Windows 9 Select users from the left hand pane and click the Add gt button to add users to the permis
43. l standard EN 55022 Limits and Methods of Measurement of Radio interference Characteristics of information Technology Equipment This device complies with CISPR Class B standard EN 50082 1 EMC Generic immunity standard Part 1 Residential commercial and light industry EN 61000 4 2 EMC Part 4 2 Testing and measurement techniques Electrostatic discharge immunity test EN 61000 4 3 EMC Part 4 3 Testing and measurement techniques Radiated radio frequency electromagnetic field immunity test EN 61000 4 4 EMC Part 4 4 Testing and measurement techniques Electrical fast transient burst immunity test iii Safety Information To reduce the risk of fire or electric shock install the unit in a temperature controlled indoor area free of conductive contaminants Do not place the unit near liquids or in an excessively humid environment Do not allow liquids or foreign objects to enter the unit All servicing of this equipment must be performed by qualified service personnel Remove rings watches and other jewelry before servicing the unit Before maintenance repair or shipment the unit must be completely switched off and unplugged and all connections must be removed iv TABLE OF CONTENT CHAPTER 1 INTRODUCTION eeeeeeessevnvnenvesessnsnennnnnenesensnnnnnenee 1 1 1 CD SERVER AND FILE SERVER BUILT IDNONE 1 CHAPTER2 INSTALLING THE FISC CDH essoveevesssssssnnvneeee 3 2
44. ly Web IP Address 21 0 67 192 53 UNIX Subnet Mask 255 255 255 0 Default Gateway fo 0 0 0 WINS Server Apply Cancel 3 2 Direct CD Accessing By default the functions of all the CD DVD devices are set as direct access Users can access all the CD DVD devices in the system folder CDROM If you want to promote a CD DVD to the root directory instead of CDROM please follow the steps l Please go to the Administration Page and click Device Manager The first page of Device Manager is Device List It lists all devices including CD DVD drives hard disk drives and tape drives Device Manager PATH Device Manager Device List A ai CD name Location Function Lock Enable cd07 CH4 master Direct Access C Vv HD name Location Function Free space Total space hdo4 CH2 slave File Drive 5893MB 6149MB Refresh Click the device link in the CD Name column It brings you to the CD Settings page The Function section specifies the role of the CD drive Select Direct Access which means you can access the disc in the CD device directly CD Mirror means any disc inserted into the CD drive will be copied into a hard disk automatically and is not for user access CD Record which appears only if the CD drive is a CD R or CD RW device means the device is used as an output device for burning CD R or CD RW discs out of the mirrored images in the FISC
45. nting CD1 of the FISC CDH server name FISC IP address 192 132 253 123 on the mnt directory of the client mount o ro FISC cdl mnt if the routing entry has been configured or 46 mount g ro 192 132 253 123 cd1 mnt if the routing entry has not been configured 4 To find out which are the exported volumes from FISC In order to find out what volumes are exported for mounting through NFS you can issue the following command on UNIX client showmount e FISC Here is a snapshot from the FISC CDH of which the IP address is 164 164 67 2 and with 7 NFS mounted volumes showmount e 164 164 67 2 Export list for 164 164 67 2 SYS everyone CACHE everyone MIRROR everyone CDROM everyone cd01 everyone cd6 everyone cd7 everyone 5 The command to show the FISC CDH server s mount information showmount a FISC 6 The command to remove a mounted volume umount mnt 5 7 Accessing The FISC CDH Using FTP The FISC CDH supports the FTP protocol after firmware version 2 0 It can use either share level security or user level security for user authentication The behaviors are somewhat different To configure the security policy of FTP go to the Network Settings page under the Administration Page and enter the FTP page where you can choose the security policy 47 Network Settings PATH Network Settings FTP K Al al E TCPAP FTP Wind
46. o the manufacturer s instructions 2 1 2 Connecting the cables onto the tower case After you are done with the previous steps or if you have a FISC CDH pre installed in a tower case only two more steps are required to finish the cabling 1 Connect a UTP cable to an Ethernet or Fast Ethernet hub switch 2 Connect the power cord to a power outlet Please check the voltages of your ATX power supply and the power outlet 2 2 Installing The Rack mount Models 2 2 1 Setup and inspection procedure After you take a FISC CDH chassis out of the box please verify the following items 1 Loosen the screws in front and at the back of the chassis and remove the top cover of it Store screws in a safe place 2 Inspect the contents of the package to ensure that everything that should be with it FISC CDH chassis w power supply installed FISC CDH Main Board Installed FISC CDH Power Control Board Installed 3 Hard Disk Drive Trays for PRO model 4 Hard Disk Drive Trays for SMART model e Manual and Utilities CD e Accessory Box contains screws and cable accessory e 4 IDE cables with label sticker near both ends e Power Cord 3 Make sure the power supply the main board and the power board are tightly attached to the chassis 4 Make sure that the power I O switch is mounted securely to the front of the case and the wire going back to the power board is intact 2 2 2 Connecting the CD ROM R RW or DVD drive onto t
47. on to move the cursor Press the middle button to change the digit IP Address 192 168 1 1 4 Press the right button until Exit Config appears on the LCD panel Press the middle button to exit the config mode Exit Config 8 5 Move the cursor to Yes and press the middle button to save the changes Save Change Yes No 2 3 2 Going to the Administration Page After setting an IP address on the LCD panel open a web browser and go to http x x x x admin x x x x is the set IP address which will open the Administration Page where you 12 can perform advance configuration For more details please read the following chapters or invoke the on line help window 2 3 3 Invoking the on line help window 2 4 Server Settings The following chapters describe the basics of the FISC CDH configuration and usage There is also a brief help information on the User Page and the Administration Page To open the on line help window please click the Help button on the tool bar on either the User Page or the Administration Page Firmware Upgrade The flash memory stores the operation system and all the functions of the FISC CDH You can upgrade the FISC CDH by writing the firmware image to the flash memory Please follow the next steps to upgrade the firmware PATH Server Settings FAM Upgrade 5 amp 8
48. orange green Flash Memory Checksum Error orange orange RTC Error orange off Network Error orange off IDE Error orange green LOAD DEFAULT green flash green flash green FIRMWARE UPGRADE flash green normal flash green READY 74 green normal normal
49. ored files or volumes that are no longer need on a short term basis By putting them in an archive store in the local hard drive or CD R DVD disc more free space can be released on the hard disk or network volume for other application that is frequently accessed One can always track and find the files or volumes from the archive if the need arises 9 1 Task List The FISC CDH can archive the data stored in either the mirror Volume or File Volume In the Task List page of the Administration Page information of all the on going or scheduled data archiving tasks is displayed here Source Volume indicate the source volume name where the data need to be archived is located Schedule the starting time of the archiving task Attribute T Filtered by file modified time Filtered by file archive bit Filtered by free space left Clear archive bit of file s Delete source file s Burn CD DVD immediately Substitute only Substitute and delete Delete the image after burning successfully Status indicate what is the status of the archiving task in progress Delete delete the corresponding archiving task D San DO toz 64 Archive PATH Archive Task List Gi Ki ei e Se E ID Source Volume Schedule Attribute Status Delete 1 Doc_Center Weekly Fri 22 00 DBx Waiting E q 3 4 E e E 5 ES SE Pe 6 7
50. over button on the left Device List PATH Device Manager Device List Recover PEED a 1 RAID Initialize ER Device Location hd04 hd07 Fault Drive hd04 Max Capacity 19541 MB Recover hd04 haos Cancel Close On the Recover page choose a hard drive in the HD List and click the Recover button The server will start recovering data of the RAID into the selected hard drive If two or more hard drives of RAID 1 or RAID 5 group is corrupted the RAID group will be marked Faulty It is recommend that all the content in the RAID group should be backup immediately to prevent further data lost Then replace the failed hard drive 57 7 5 Things You Should Know Only no init hard drives can be configured as a RAID group no init means not initialized If you want to group an initialized hard drive you have to go to the HD Initialized page of the hard drive to set its function back to no init 58 Chapter 8 Tape Backup The FISC CDH supports ATAPI tape drives for data backup and restore The basic unit for backup and restore is a volume When you select a volume for backup all folders and files in it will be backed up There are two kinds of volumes in the FISC CDH mirror volumes and file volumes Each tape can store one kind of volumes but not both Note that the FISC CDH only supports full backup Whenever it backs up data to a tape any old dat
51. ower control board DBrd 4 Connect the power cable from the ATX power supply to the controller 5 Connect the power LED cable of the tower case to Pin 1 amp 2 of the controller s J17 connector DBrd means the small daughter board which is the power control board UTP Cable from the DBrd LZ gt Ko Power Cable Power LED Cable from the ATX from the tower case power supply Figure 2 1 Connecting cables to the controller Connect the supplied ATX power cable with the power control board DBrd and the ATX power supply Connect the power switch trigger switch cable of the tower case to the power control board UC cable power switch cable from the aner Ny from the tower case SN 7 ET d ATX power cable Gr JE N from the ATX 4 power supply P UTP cable from the controller Figure 2 2 Connecting cables to the power control board DBrd 8 Connect IDE cables with the controller and the storage devices hard drives CD DVD drives IDE Connector Channel 4 DE Connector IDE Connector Channel 3 Channel 2 IDE Connector Channel 1 Figure 2 3 Connecting IDE cables to the controller Caution On the daughter board power control board is a coin cell style lithium battery of type CR2302 Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type recommended by the manufacturer Dispose of used batteries according t
52. ows IV Enable FTP NetWare Macintosh Security Policy Share Level Security C User Level Security I Authenticated by PDC Apply Cancel 5 7 1 FTP access with share level security First set the share password of a share Second use a FTP client to log on to the FISC CDH server Use the share name as the user name and the share password as the password After logon you can only see the content of the share but not other shares For example assume that the FISC CDH server has an IP address of 192 168 1 2 the share name is abe and the share password is 123 We use the FTP command under DOS prompt C gt ftp 192 168 1 2 Connected to 192 168 1 2 220 FISCCDH FTP server ready User 192 168 1 2 none abc 331 Password required for abc Password 123 230 User abc logged in ftp gt ls 200 PORT command successful 150 Opening ASC mode data connection for file list 123folder 456folder 226 Transfer complete ftp 15 bytes received in 0 00Seconds 15000Kbytes sec 48 ftp gt _ 5 7 2 FTP access with user level security First configure the user access rights of a share by assigning users to it You can assign local users and or remote users retrieved from the Primary Domain Controller PDC Second use a FTP client to log on to the FISC CDH server Input the user name you just assigned and its user password After logon you are in the root dire
53. panel select among Info Warning Error and Emergency in the LCD log level pull down menu Info means general system events such as Start mirroring Warning means some action fails such as Remote mirror fails Error means the FISC CDH is in dangerous state such as Temperature is too high Emergency means fatal errors such as Firmware upgrade fails To notify the users of system events via email please select Mail log level as Info Warning Error or Emergency Next specify the IP address of the mail server in the SMTP server IP field Then specify the user s email address in the Admin email address field 14 2 6 Multi Language Support The FISC CDH has built in multi language support of the web pages in the firmware including both the Administration Page and the User Page You only have to change the settings of their Internet browsers to see different languages of web pages instantly Also to solve some localization issues the FISC CDH allows you to select the code page Please read the following sections for details 2 6 1 The administration page and the user page Total 9 languages of the web pages are included English French German Italian Spanish Japanese Korean Simplified Chinese and Traditional Chinese You can configure your web browser to specify the language of the web page Take Microsoft Internet Explorer 5 for example Open IE 5 and go to the Administration Page Click Tools from the file menu of I
54. rights 5 4 1 2 DOS command line To access the FISC CDH under DOS with NetWare you have to map the FISC CDH to a drive letter first Syntax Map lt logical drive letter gt lt FISC CDH s NetWare server name gt lt Share Name gt Example 1 To map the share MIRROR of a FISC CDH with server name NCPD8FF8508 as next available drive letter type map n NCPD8FF8508 MIRROR The FISC CDH will prompt you to enter your user name and password Enter the user name and password in either the local user database or the bindery server Then the share MIRROR will be mapped to a drive letter of a local machine 42 5 5 Using The FISC CDH Under MacOS To use the FISC CDH under MacOS first enable the Macintosh protocol support of the FISC CDH Go to Network Settings on the Administration Page and click the Macintosh button on the left Check the Enable Macintosh Network check box and click the Apply button PATH Network Settings Macintosh BS 7 Al ei Windows NetWare Address net node 420 189 Zone UNIX Default zone Select zone manually nas D Protocol s C AppleTalk TCPAP Both Security Policy Share Level C User Level Apply Cancel Enable Macintosh Network There are two ways under MacOS to access a network server Chooser and Network Browser Please check the above page about the server name and the zone of the FISC CDH under Macintosh Network
55. s The FISC CDH integrates itself into your network once the setup and configuration are completed You can access the FISC CDH by means of the browsing and mapping tools coming with your network operating system The following sections describe how to access the FISC CDH from your desktop in various client environments For technical support please consult your network administrator or dealer 5 1 Accessing Through Web Browsers To access the FISC CDH through a web browser simply type in the IP address of the server and press Enter to go to the user page as shown below 5 1 1 FISC CDH User Page Server Names Tool bar NASO001 BE Mot Available MAC0123 A Here Path 0 x Find A pg File Name v File Size Date Time Description CACHE 05 09 2001 10 12 System Folder CDROM 05 09 2001 10 12 System Folder MIRROR 05 14 2001 17 25 System Folder sys 05 09 2001 10 12 System Folder Cavicky 03 01 2001 15 48 Content Page Search Server Change Password Customized Link 11 This page shows the content of the server You can click on any folder to display its content or on any file to download it Default Folders there are four default folders SYS provides access to system information files CACHE to all cached CD images CDROM to all CD devices and MIRROR to all mirrored images The icons of default folders are different from 37 other folder icons Server Names from left to rig
56. schedule You can click the Delete Schedule button to cancel the scheduled launch 51 CD Settings Operation Mode UDMA Mode 2 Function CD Record Model Name SONY CD RW CRX140E Device Location Channel 2 Master CD Record Schedule Date 09 01 2000 Time f17 26 49 Delete Schedule 7 Ifthe Launch Schedule is Immediately or the schedule is over due the screen will show the CD recording progress CD Settings Operation Mode UDMA Mode 2 Function CD Record Model Name SONY CD RW CRX140E Device Location Channel 4 slave CD Recording u E After the CD recording process is finished the FISC CDH returns to the normal CD Settings page 52 Chapter 7 RAID Configuration RAID Redundant Array of Independent Disks is a group of hard disks that act as one providing fault tolerance and or increasing performance Although hot swap function is not available FISC CDH supports RAID 0 RAID 1 and RAID 5 7 1 1 1 RAIDO RAID level 0 is disk striping only which interleaves data across multiple disks for better performance It does not provide safeguards against failure 7 1 1 2 RAID1 RAID level 1 uses two hard drives It keeps identical copies of data on the two hard drives If one hard drive fails the RAID can still operate without data loss It offers the highest reliability but doubles storage cost Two hard drives can only have the capacity of one 7 1 1 3 RAID 5 RAID level 5 uses three or more
57. server O Q AFPD8FF8508 PB el gt Ew CACHE on AFPDSFF8508 GF cd03 on AFPDSFF8S08 2 CDROM on AFPD8FF8508 F2001 on AFPDSFF8508 MIRROR on AFPDSFF8S08 x SYS on AFPD8FF8508 3 Double click any share item that you want to access 5 6 Using The FISC CDH Under NFS Clients To use the FISC CDH under NFS clients first enable the NFS protocol support on the FISC CDH Administration Page Please go to the Network Settings page and click the UNIX button on the left Check the Enable NFS check box and click the Apply button 45 eee UNIX em ER Enable NFS HetWare Macintosh Apply Cancel Web 5 6 1 Howto use the FISC CDH under NFS clients The FISC CDH can export all NFS mountable CD and file volumes to any NFS client Below is a sample procedure of exporting a volume to a NFS client 1 Add a routing entry in the UNIX client host table In order to avoid the inconvenience of typing the IP address of the CD server when mounting the CD you can add one line in etc hosts file as follows Syntax lt FISC CDH IP Address gt lt FISC CDH Server Name gt Example 192 1327253 123 FISC 2 Add the mount point at the UNIX client usually named mnt under the root directory cd mkdir mnt 3 Mount the FISC CDH on a UNIX client mount point A UNIX client can mount any exported volume s of the FISC CDH using the mount command Please refer the following example for mou
58. sion list To remove users select users from the right 34 hand pane and click the lt Remove button Share Manager PATH Share Manager Share List Set F6001 Local User A T Al e Local Groups Users Privileged Groups Users windows s tart of List ssssStart of List RW user a NetWare Web ndd gt UNIX lt Remove Lee Apply Cancel 10 Assign a user s access right by selecting RO Read only or RW Read Write below the Privileged groups users pane When done with assigning users click the Apply button 11 Now only those users who are granted access rights are able to read or write the share via Network Neighborhood under Windows 4 4 Renaming Volume Label and Volume Name To rename a CD disc or a CD image please go to the Share Manager page and click the Share List button on the left Share Manager PATH Share Manager Share List Bel p Al ei Share Name Share Type Not Share Security Share a Volume cdot Volume CH Set Group Volumes E6001 Volume B Set Volume List CACHE System B F MIRROR System Set CDROM System Set SYS System Set 35 Click the hyperlink of the share in the Share Name column to go to a dialog window Enter a new name and click the Apply button Press the Close button to go to the previous menu 36 Chapter 5 Accessing From Different Client
59. ted from the list to perform split image archive task 69 12 Configure to split the large image into 650MB in order to burn onto a CD R 13 When finish click Apply Modify Task Task 1 C Source Image None Z Source File Volume Doc Center 3338 51 20MB z 1 First level folder Pm 2 Build Image to Auto z 3 Volume Label ford doc up to 20 characters 4 Volume Label Extension None Date Volume Name CG As the volume label 5 C Specified as Image Substitution Substitute only z 6 Filter Options I Include only the files with modified time later than sj sji and earlier than sj i z E I Include only the files with archive bits set I When the free space is less than MB Miscellaneous I Clear archive bits of source files after archived IV Delete source files after being archived 8 M Burn CD DVD immediately after the image s are built 9 Set Schedule Immediately 10 According to schedule C Daily Weekly Monthly Special Date Time hour minute 22 foo sl Day of Week Friday J Day of Month Al Special Date j sid si sg Choose a CD DVD Recorder CD DVD Recorder cd01 RICOH CD RIRW MP7200A 1 Split Image By E sl 2 I Delete the image after burning successfully AN Cancel 70 Appendix Glossary CD Image a copy of a CD DVD disc on a hard disk CD Mirror to copy a CD image into a hard disk
60. tomatically saves data and then turns off power with all files safe and sound In addition to the advanced power management function FISC CDH is equipped with share and user level security control to prevent illegal access of data That is not all FISC CDH uniquely provides you with system operating information and issues warning messages about system status on LCD panel To keep server from being over heated FISC CDH reminds you of the server temperature collected from a built in thermal sensing circuit Universal Utilization Fitting in a variety of network environments has always been the focus of the FISC CD family of products The FISC CDH functions perfectly under most of the network environments such as Microsoft Windows Novell NetWare Apple Macintosh UNIX and Web browsers Meanwhile the FISC CDH features all convenience and utilization NAS server should contain Imagine the server being ready in three minutes you hook it up plug in the power and input the IP address directly on the LCD control panel Chapter 2 Installing the FISC CDH 2 1 Connecting the FISC CDH 2 1 1 Connecting cables within a tower case After you take a FISC CDH controller out of the box please follow the steps below to connect all the cables 1 Fix the power control board on the back of the tower case 2 Connect the UTP cable to both the controller and the power control board DBrd 3 Connect the IC cable to both the controller and the p
61. up like RAID A or RAID B Then click the RAID Initialize button on the left PATH Device Manager Device List RAID Initialize Ga Ei al ei RAID Settings RAID Initialize RAID Initialize The data contained in the selected RAID drive will be lost permanently Do you really want to Initialize it RAID Partition Please select the function of the RAID C Mirror Device File Device x On this page click either Mirror Device or File Device Click the OK button to initialize the RAID If you choose to initialize the RAID group as a File Device you should create partitions next by clicking the RAID Partition button on the left What If Hard Drives Fail RAID level 0 RAID level 0 only combines several hard drives as a single device offers larger capacity and provides no fault tolerance A RAID group configured as RAID 0 cannot function any more if any of its hard drives fails When any one of the hard drives of RAID 0 group is failed the RAID group will be marked Faulty In this case it is recommend that all the content in the RAID group should be backup immediately to prevent further data lost Then replace the failed hard drive 7 42 RAID level 1 amp 5 RAID level can still operate if one of the two hard drives fails If that happens the RAID group is marked Degraded and does not provide data protection any more To restore a Degraded RAID back to the normal status you have to replac
62. would like to limit user access 26 Share Manager PATH Share Manager Share List Set cd01001 Local User 3 Sale Share Password Local User Local Groups Users Privileged Groups Users Windows NetWare Web UNIX s tart of List tart of List RO user a Apply Cancel 7 On the page click the Local User button If you want to add PDC users click Windows 8 Select users from the left hand pane and click the Add gt button to add users to the permission list To remove users select users from the right hand pane and click the lt Remove button When you are done with assigning users click the Apply button 9 Now only those users who are granted access rights are able to read or write the share via Network Neighborhood under Windows 3 6 User License Control Administrators can control how many users are accessing a share at the same time by limiting the maximum concurrent network connections of that share To limit the maximum connections go to Administration Page and enter the Share Manager page Click the Set button in the Security column against the share of which you want to control the access Then you enter a page where you can configure the access control of the share Click the Maximum Connections button on the left 27 3 7 Share List PATH Share Manager Share List Maximum Connections F8001 ay pl al E Share Password Maximum Conn
63. y button Network Settings PATH Network Settings Windows Gi Ei a e WE IV Enable Microsoft Network NetWare Macintosh Server Name RYAN1 18 i q Web DomainAWorkgroup JALLIONRD Protocol s C NetBEUI NetBIOS over TCP IP Both Security Policy Share Level Security User Level Security I Authenticated by PDC Apply Advance Cancel 3 Go to the Share Manager page and click the Share List button on the left Click the Set 32 button in the Security column next to the share of which you would like to limit the user access Share Manager PATH Share Manager Share List Bel El fal el Share Name Share Type Not Share Security Share a Volume F6001 Volume r gg Group Volumes CACHE System Set Volume List MIRROR System EE CDROM System Set SYS System Set 4 On the Share Password page select either Read Only or Full Control and set the Share Password Click the OK button to confirm the changes Share Manager PATH Share Manager Share List Set F6001 Share Password 7 fu E Al e Share Password Local User Access type Windows Read Only Full Control NetWare Share Password E Web Confirm Password Ok Cancel UNIX 5 Now users have to enter the share password if they want to access the share via Network Neighborhood under Windows User Leve

Download Pdf Manuals

Related Search

Related Contents

GH-4/BNC GH-4/SMA 取扱説明書 - Grandpa`s Shack Home Page  Viking VECU User's Manual    一太郎 9/8 文書  TAFCO WINDOWS NU2-3218WV Instructions / Assembly  Kurzanleitung Develop Ineo+ 200  WARV-2マニュアル（PDF：2.7MB）  Einbau- und Bedienungsanleitung  (\\\\Nas-rd\\public\\CAD\\MF\\\216\346\210\265\220\340\226\276\217  Visaton K 57 C  

Copyright © All rights reserved. Failed to retrieve file